WSL2-Linux-Kernel/sound/firewire/motu/motu.c

298 строки
7.5 KiB
C
Исходник Обычный вид История

/*
* motu.c - a part of driver for MOTU FireWire series
*
* Copyright (c) 2015-2017 Takashi Sakamoto <o-takashi@sakamocchi.jp>
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
#include "motu.h"
#define OUI_MOTU 0x0001f2
MODULE_DESCRIPTION("MOTU FireWire driver");
MODULE_AUTHOR("Takashi Sakamoto <o-takashi@sakamocchi.jp>");
MODULE_LICENSE("GPL v2");
ALSA: firewire-motu: add an abstraction layer for three types of protocols In an aspect of used protocols to communicate, models of MOTU FireWire units are categorized to three generations. This commit adds an abstraction layer of the protocols for features related to packet streaming functionality. This layer includes 5 operations. When configuring packet streaming functionality with sampling rate and sampling transmission frequency, .get_clock_rate and .set_clock_rate are called with proper arguments. MOTU FireWire series supports up to 192.0kHz. When checking current source of sampling clock (not clock for packetization layer), .get_clock_source is used. Enumeration is added to represent the sources supported by this series. This operation can be used to expose available sampling rate to user space applications when the unit is configured to use any input signal as source of clock instead of crystal clock. In the protocols, the path between packet processing layer and digital signal processing layer can be controlled. This looks a functionality to 'mute' the unit. For this feature, .switch_fetching_mode is added. This can be used to suppress noises every time packet streaming starts/stops. In a point of the size of data blocks at a certain sampling transmission frequency, the most units accept several modes. This is due to usage of optical interfaces. The size differs depending on which modes are configured to the interfaces; None, S/PDIF and ADAT. Additionally, format of packet is different depending on protocols. To cache current size of data blocks and its format, .cache_packet_formats is added. This is used by PCM functionality, packet streaming functionality and data block processing layer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-22 15:30:14 +03:00
const unsigned int snd_motu_clock_rates[SND_MOTU_CLOCK_RATE_COUNT] = {
/* mode 0 */
[0] = 44100,
[1] = 48000,
/* mode 1 */
[2] = 88200,
[3] = 96000,
/* mode 2 */
[4] = 176400,
[5] = 192000,
};
static void name_card(struct snd_motu *motu)
{
struct fw_device *fw_dev = fw_parent_device(motu->unit);
struct fw_csr_iterator it;
int key, val;
u32 version = 0;
fw_csr_iterator_init(&it, motu->unit->directory);
while (fw_csr_iterator_next(&it, &key, &val)) {
switch (key) {
case CSR_VERSION:
version = val;
break;
}
}
strcpy(motu->card->driver, "FW-MOTU");
strcpy(motu->card->shortname, motu->spec->name);
strcpy(motu->card->mixername, motu->spec->name);
snprintf(motu->card->longname, sizeof(motu->card->longname),
"MOTU %s (version:%d), GUID %08x%08x at %s, S%d",
motu->spec->name, version,
fw_dev->config_rom[3], fw_dev->config_rom[4],
dev_name(&motu->unit->device), 100 << fw_dev->max_speed);
}
static void motu_free(struct snd_motu *motu)
{
snd_motu_transaction_unregister(motu);
snd_motu_stream_destroy_duplex(motu);
}
/*
* This module releases the FireWire unit data after all ALSA character devices
* are released by applications. This is for releasing stream data or finishing
* transactions safely. Thus at returning from .remove(), this module still keep
* references for the unit.
*/
static void motu_card_free(struct snd_card *card)
{
motu_free(card->private_data);
}
static void do_registration(struct work_struct *work)
{
struct snd_motu *motu = container_of(work, struct snd_motu, dwork.work);
int err;
if (motu->registered)
return;
err = snd_card_new(&motu->unit->device, -1, NULL, THIS_MODULE, 0,
&motu->card);
if (err < 0)
return;
name_card(motu);
err = snd_motu_transaction_register(motu);
if (err < 0)
goto error;
err = snd_motu_stream_init_duplex(motu);
if (err < 0)
goto error;
snd_motu_proc_init(motu);
err = snd_motu_create_pcm_devices(motu);
if (err < 0)
goto error;
if ((motu->spec->flags & SND_MOTU_SPEC_RX_MIDI_2ND_Q) ||
(motu->spec->flags & SND_MOTU_SPEC_RX_MIDI_3RD_Q) ||
(motu->spec->flags & SND_MOTU_SPEC_TX_MIDI_2ND_Q) ||
(motu->spec->flags & SND_MOTU_SPEC_TX_MIDI_3RD_Q)) {
err = snd_motu_create_midi_devices(motu);
if (err < 0)
goto error;
}
err = snd_motu_create_hwdep_device(motu);
if (err < 0)
goto error;
err = snd_card_register(motu->card);
if (err < 0)
goto error;
/*
* After registered, motu instance can be released corresponding to
* releasing the sound card instance.
*/
motu->card->private_free = motu_card_free;
motu->card->private_data = motu;
motu->registered = true;
return;
error:
snd_motu_transaction_unregister(motu);
snd_motu_stream_destroy_duplex(motu);
snd_card_free(motu->card);
dev_info(&motu->unit->device,
"Sound card registration failed: %d\n", err);
}
static int motu_probe(struct fw_unit *unit,
const struct ieee1394_device_id *entry)
{
struct snd_motu *motu;
/* Allocate this independently of sound card instance. */
motu = devm_kzalloc(&unit->device, sizeof(struct snd_motu), GFP_KERNEL);
if (!motu)
return -ENOMEM;
motu->unit = fw_unit_get(unit);
dev_set_drvdata(&unit->device, motu);
motu->spec = (const struct snd_motu_spec *)entry->driver_data;
mutex_init(&motu->mutex);
spin_lock_init(&motu->lock);
init_waitqueue_head(&motu->hwdep_wait);
/* Allocate and register this sound card later. */
INIT_DEFERRABLE_WORK(&motu->dwork, do_registration);
snd_fw_schedule_registration(unit, &motu->dwork);
return 0;
}
static void motu_remove(struct fw_unit *unit)
{
struct snd_motu *motu = dev_get_drvdata(&unit->device);
/*
* Confirm to stop the work for registration before the sound card is
* going to be released. The work is not scheduled again because bus
* reset handler is not called anymore.
*/
cancel_delayed_work_sync(&motu->dwork);
if (motu->registered) {
// Block till all of ALSA character devices are released.
snd_card_free(motu->card);
}
mutex_destroy(&motu->mutex);
fw_unit_put(motu->unit);
}
static void motu_bus_update(struct fw_unit *unit)
{
struct snd_motu *motu = dev_get_drvdata(&unit->device);
/* Postpone a workqueue for deferred registration. */
if (!motu->registered)
snd_fw_schedule_registration(unit, &motu->dwork);
/* The handler address register becomes initialized. */
snd_motu_transaction_reregister(motu);
}
static const struct snd_motu_spec motu_828mk2 = {
.name = "828mk2",
.protocol = &snd_motu_protocol_v2,
.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
SND_MOTU_SPEC_TX_MICINST_CHUNK |
SND_MOTU_SPEC_TX_RETURN_CHUNK |
SND_MOTU_SPEC_RX_SEPARETED_MAIN |
SND_MOTU_SPEC_HAS_OPT_IFACE_A |
SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_2ND_Q,
.analog_in_ports = 8,
.analog_out_ports = 8,
};
ALSA: firewire-motu: add support for Motu Traveler This commit adds support for MOTU Traveler, launched in 2005, discontinued quite before. As a result, transmission of PCM frame and MIDI messages is available via ALSA PCM and RawMIDI/Sequencer interfaces. This model supports sampling transmission frequency up to 192.0 kHz, and AES/EBU on XLR interface and ADAT on optical interface. Unlike Motu 828MkII, Windows driver can switch fetching mode for DSP, like mute/unmute feature. Although this commit enables high sampling transmission frequency, actual sound from this model is not good. As long as I tested, it's silence at 176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I reported at 3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol layer'), timestamping on source packet header (SPH) may not still be good for this model as well. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04106505 bus_info_length 4, crc_length 16, crc 25861 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0001f32f device_id 000001f32f | EUI-64 0001f2000001f32f root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035955 directory_length 3, crc 22869 42c 120001f2 specifier id 430 13000009 version 434 17107800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 000206b2 leaf_length 2, crc 1714 43c 0001f200 company_id 0001f2 | 440 0001f32f device_id 000001f32f | EUI-64 0001f2000001f32f Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-18 15:07:55 +03:00
const struct snd_motu_spec snd_motu_spec_traveler = {
.name = "Traveler",
.protocol = &snd_motu_protocol_v2,
.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
SND_MOTU_SPEC_SUPPORT_CLOCK_X4 |
SND_MOTU_SPEC_TX_RETURN_CHUNK |
SND_MOTU_SPEC_HAS_AESEBU_IFACE |
SND_MOTU_SPEC_HAS_OPT_IFACE_A |
SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_2ND_Q,
.analog_in_ports = 8,
.analog_out_ports = 8,
};
static const struct snd_motu_spec motu_828mk3 = {
ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3 MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire series, produced in 2008/2014. This model consists of three chips for functionality on IEEE 1394 bus: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet processing and data block processing layer) * TI TMS320C6722 (Digital signal processing) This commit adds a support for this model, with its unique protocol as version 3. This protocol has some additional features to protocol version 2. * Support several optical interfaces. * Support a data chunk for return of reverb effect. * Have a quirk of tx packets. * Support heartbeat asynchronous transaction. In this protocol, series of transferred packets has some quirks. Below fields in CIP headers of the packets are out of IEC 61883-1: - SID (source node id): always 0x0d - DBS (data block size): always 0x04 - DBC (data block counter): always 0x00 - EOH (End of header): always 0x00 Below is an actual sample of transferred packets. quads CIP1 CIP2 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF Status of clock is configured by write transactions to 0x'ffff'f000'0b14, as well as version 2, while meanings of fields are different from the former protocols. Modes of optical interfaces are configured by write transactions to 0x'ffff'f000'0c94. Drivers can register its address to receive heatbeat transactions from the unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is for the lower part. Nevertheless, this feature is not useless for this driver and this commit omits it. Each data block consists of two parts in a point of the number of included data chunks. In both of 'fixed' and 'differed' parts, the number of included data blocks are a multiple of 4, thus depending on models there's some empty data chunks. For example, 828mk3 includes one pair of empty data chunks in its fixed part. When optical interface is configured to S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part. To reduce consumption of CPU cycles with additional conditions/loops, this commit just exposes these empty chunks to user space as PCM channels. Additionally, 828mk3 has a non-negligible overhead to change its sampling transfer frequency. When softwares send asynchronous transaction to perform it, LED on the unit starts to blink. In a worst case, it continues blink during several seconds; e.g. 10 seconds. When stopping blinking, the unit seems to be prepared for the requested sampling transfer frequency. To wait for the preparation, this commit forces the driver to call task scheduler and applications sleeps for 4 seconds. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-22 15:30:28 +03:00
.name = "828mk3",
.protocol = &snd_motu_protocol_v3,
.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
SND_MOTU_SPEC_SUPPORT_CLOCK_X4 |
SND_MOTU_SPEC_TX_MICINST_CHUNK |
SND_MOTU_SPEC_TX_RETURN_CHUNK |
SND_MOTU_SPEC_TX_REVERB_CHUNK |
SND_MOTU_SPEC_RX_SEPARETED_MAIN |
ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3 MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire series, produced in 2008/2014. This model consists of three chips for functionality on IEEE 1394 bus: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet processing and data block processing layer) * TI TMS320C6722 (Digital signal processing) This commit adds a support for this model, with its unique protocol as version 3. This protocol has some additional features to protocol version 2. * Support several optical interfaces. * Support a data chunk for return of reverb effect. * Have a quirk of tx packets. * Support heartbeat asynchronous transaction. In this protocol, series of transferred packets has some quirks. Below fields in CIP headers of the packets are out of IEC 61883-1: - SID (source node id): always 0x0d - DBS (data block size): always 0x04 - DBC (data block counter): always 0x00 - EOH (End of header): always 0x00 Below is an actual sample of transferred packets. quads CIP1 CIP2 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF Status of clock is configured by write transactions to 0x'ffff'f000'0b14, as well as version 2, while meanings of fields are different from the former protocols. Modes of optical interfaces are configured by write transactions to 0x'ffff'f000'0c94. Drivers can register its address to receive heatbeat transactions from the unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is for the lower part. Nevertheless, this feature is not useless for this driver and this commit omits it. Each data block consists of two parts in a point of the number of included data chunks. In both of 'fixed' and 'differed' parts, the number of included data blocks are a multiple of 4, thus depending on models there's some empty data chunks. For example, 828mk3 includes one pair of empty data chunks in its fixed part. When optical interface is configured to S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part. To reduce consumption of CPU cycles with additional conditions/loops, this commit just exposes these empty chunks to user space as PCM channels. Additionally, 828mk3 has a non-negligible overhead to change its sampling transfer frequency. When softwares send asynchronous transaction to perform it, LED on the unit starts to blink. In a worst case, it continues blink during several seconds; e.g. 10 seconds. When stopping blinking, the unit seems to be prepared for the requested sampling transfer frequency. To wait for the preparation, this commit forces the driver to call task scheduler and applications sleeps for 4 seconds. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-22 15:30:28 +03:00
SND_MOTU_SPEC_HAS_OPT_IFACE_A |
SND_MOTU_SPEC_HAS_OPT_IFACE_B |
SND_MOTU_SPEC_RX_MIDI_3RD_Q |
SND_MOTU_SPEC_TX_MIDI_3RD_Q,
ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3 MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire series, produced in 2008/2014. This model consists of three chips for functionality on IEEE 1394 bus: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet processing and data block processing layer) * TI TMS320C6722 (Digital signal processing) This commit adds a support for this model, with its unique protocol as version 3. This protocol has some additional features to protocol version 2. * Support several optical interfaces. * Support a data chunk for return of reverb effect. * Have a quirk of tx packets. * Support heartbeat asynchronous transaction. In this protocol, series of transferred packets has some quirks. Below fields in CIP headers of the packets are out of IEC 61883-1: - SID (source node id): always 0x0d - DBS (data block size): always 0x04 - DBC (data block counter): always 0x00 - EOH (End of header): always 0x00 Below is an actual sample of transferred packets. quads CIP1 CIP2 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF Status of clock is configured by write transactions to 0x'ffff'f000'0b14, as well as version 2, while meanings of fields are different from the former protocols. Modes of optical interfaces are configured by write transactions to 0x'ffff'f000'0c94. Drivers can register its address to receive heatbeat transactions from the unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is for the lower part. Nevertheless, this feature is not useless for this driver and this commit omits it. Each data block consists of two parts in a point of the number of included data chunks. In both of 'fixed' and 'differed' parts, the number of included data blocks are a multiple of 4, thus depending on models there's some empty data chunks. For example, 828mk3 includes one pair of empty data chunks in its fixed part. When optical interface is configured to S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part. To reduce consumption of CPU cycles with additional conditions/loops, this commit just exposes these empty chunks to user space as PCM channels. Additionally, 828mk3 has a non-negligible overhead to change its sampling transfer frequency. When softwares send asynchronous transaction to perform it, LED on the unit starts to blink. In a worst case, it continues blink during several seconds; e.g. 10 seconds. When stopping blinking, the unit seems to be prepared for the requested sampling transfer frequency. To wait for the preparation, this commit forces the driver to call task scheduler and applications sleeps for 4 seconds. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-22 15:30:28 +03:00
.analog_in_ports = 8,
.analog_out_ports = 8,
};
static const struct snd_motu_spec motu_audio_express = {
ALSA: firewire-motu: add support for MOTU Audio Express MOTU Audio Express is one of third generation in MOTU FireWire series, produced in 2011. This model consists of three chips: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Microchip USB3300 (Hi-Speed USB Device with ULPI interface) * Xilinx Spartan-3A FPGA, XC3S400A (Link layer for IEEE 1394 bus, packet processing and data block processing layer) This commit adds support for this model. As I expected, it works with current implementaion of protocol version 3. On the other hand, the unit has a quirk to request subaction originated by any driver. 11:45:51.287643 firewire_ohci 0000:03:00.0: AT spd 2 tl 1f, ffc1 -> ffc0, -reserved-, QW req, fffff0000b14 = 02000200 11:45:51.289193 firewire_ohci 0000:03:00.0: AR spd 2 tl 1f, ffc0 -> ffc1, ack_complete, W resp 11:45:51.289381 fireire_core 0000:03:00.0: unsolicited response (source ffc0, tlabel 1f) 11:45:51.313071 firewire_ohci 0000:03:00.0: AT spd 2 tl 20, ffc1 -> ffc0, ack_pending , QW req, fffff0000b14 = 02000200 11:45:51.314539 firewire_ohci 0000:03:00.0: AR spd 2 tl 20, ffc0 -> ffc1, ack_complete, W resp In 1394 OHCI (rev.1.1), after OUTPUT_LAST* descriptors is processed, 'xferStaus' field is filled with 'ContextControl[0:15]' (see clause 7.1.3). 5 bits in LSB side of the field has ack code in acknowledge from the unit (see clause 7.2.2). A list of the code is shown in Table 3-2. As long as I investigated, in a case of the '-reserved-' acknowledge message from the unit, the field has 0x10. On the table, this value is 'Reserved for definition by future 1394 standards'. As long as I know, any specifications of IEEE 1394 has no such extensions, thus the unit is out of specification. Besides, I note that the unit does not always acknowledge with the invalid code. I guess this is a bug of firmware. I confirmed the bug in firmware version 1.04 and this is the latest one. $ cd linux-firewire-utils $ python2 ./src/crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410a756 bus_info_length 4, crc_length 16, crc 42838 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 000a8a7b device_id 00000a8a7b | EUI-64 0001f200000a8a7b root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00031680 directory_length 3, crc 5760 42c 120001f2 specifier id 430 13000033 version 434 17104800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 00025ef3 leaf_length 2, crc 24307 43c 0001f200 company_id 0001f2 | 440 000a8a7b device_id 00000a8a7b | EUI-64 0001f200000a8a7b Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-20 15:25:04 +03:00
.name = "AudioExpress",
.protocol = &snd_motu_protocol_v3,
.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
SND_MOTU_SPEC_TX_MICINST_CHUNK |
SND_MOTU_SPEC_TX_RETURN_CHUNK |
SND_MOTU_SPEC_RX_SEPARETED_MAIN |
ALSA: firewire-motu: add support for MOTU Audio Express MOTU Audio Express is one of third generation in MOTU FireWire series, produced in 2011. This model consists of three chips: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Microchip USB3300 (Hi-Speed USB Device with ULPI interface) * Xilinx Spartan-3A FPGA, XC3S400A (Link layer for IEEE 1394 bus, packet processing and data block processing layer) This commit adds support for this model. As I expected, it works with current implementaion of protocol version 3. On the other hand, the unit has a quirk to request subaction originated by any driver. 11:45:51.287643 firewire_ohci 0000:03:00.0: AT spd 2 tl 1f, ffc1 -> ffc0, -reserved-, QW req, fffff0000b14 = 02000200 11:45:51.289193 firewire_ohci 0000:03:00.0: AR spd 2 tl 1f, ffc0 -> ffc1, ack_complete, W resp 11:45:51.289381 fireire_core 0000:03:00.0: unsolicited response (source ffc0, tlabel 1f) 11:45:51.313071 firewire_ohci 0000:03:00.0: AT spd 2 tl 20, ffc1 -> ffc0, ack_pending , QW req, fffff0000b14 = 02000200 11:45:51.314539 firewire_ohci 0000:03:00.0: AR spd 2 tl 20, ffc0 -> ffc1, ack_complete, W resp In 1394 OHCI (rev.1.1), after OUTPUT_LAST* descriptors is processed, 'xferStaus' field is filled with 'ContextControl[0:15]' (see clause 7.1.3). 5 bits in LSB side of the field has ack code in acknowledge from the unit (see clause 7.2.2). A list of the code is shown in Table 3-2. As long as I investigated, in a case of the '-reserved-' acknowledge message from the unit, the field has 0x10. On the table, this value is 'Reserved for definition by future 1394 standards'. As long as I know, any specifications of IEEE 1394 has no such extensions, thus the unit is out of specification. Besides, I note that the unit does not always acknowledge with the invalid code. I guess this is a bug of firmware. I confirmed the bug in firmware version 1.04 and this is the latest one. $ cd linux-firewire-utils $ python2 ./src/crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410a756 bus_info_length 4, crc_length 16, crc 42838 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 000a8a7b device_id 00000a8a7b | EUI-64 0001f200000a8a7b root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00031680 directory_length 3, crc 5760 42c 120001f2 specifier id 430 13000033 version 434 17104800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 00025ef3 leaf_length 2, crc 24307 43c 0001f200 company_id 0001f2 | 440 000a8a7b device_id 00000a8a7b | EUI-64 0001f200000a8a7b Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-20 15:25:04 +03:00
SND_MOTU_SPEC_RX_MIDI_2ND_Q |
SND_MOTU_SPEC_TX_MIDI_3RD_Q,
.analog_in_ports = 2,
.analog_out_ports = 4,
};
#define SND_MOTU_DEV_ENTRY(model, data) \
{ \
.match_flags = IEEE1394_MATCH_VENDOR_ID | \
IEEE1394_MATCH_MODEL_ID | \
IEEE1394_MATCH_SPECIFIER_ID, \
.vendor_id = OUI_MOTU, \
.model_id = model, \
.specifier_id = OUI_MOTU, \
.driver_data = (kernel_ulong_t)data, \
}
static const struct ieee1394_device_id motu_id_table[] = {
SND_MOTU_DEV_ENTRY(0x101800, &motu_828mk2),
ALSA: firewire-motu: add support for Motu Traveler This commit adds support for MOTU Traveler, launched in 2005, discontinued quite before. As a result, transmission of PCM frame and MIDI messages is available via ALSA PCM and RawMIDI/Sequencer interfaces. This model supports sampling transmission frequency up to 192.0 kHz, and AES/EBU on XLR interface and ADAT on optical interface. Unlike Motu 828MkII, Windows driver can switch fetching mode for DSP, like mute/unmute feature. Although this commit enables high sampling transmission frequency, actual sound from this model is not good. As long as I tested, it's silence at 176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I reported at 3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol layer'), timestamping on source packet header (SPH) may not still be good for this model as well. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 04106505 bus_info_length 4, crc_length 16, crc 25861 404 31333934 bus_name "1394" 408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4) 40c 0001f200 company_id 0001f2 | 410 0001f32f device_id 000001f32f | EUI-64 0001f2000001f32f root directory ----------------------------------------------------------------- 414 0004c65c directory_length 4, crc 50780 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 8d000006 --> eui-64 leaf at 438 424 d1000001 --> unit directory at 428 unit directory at 428 ----------------------------------------------------------------- 428 00035955 directory_length 3, crc 22869 42c 120001f2 specifier id 430 13000009 version 434 17107800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 000206b2 leaf_length 2, crc 1714 43c 0001f200 company_id 0001f2 | 440 0001f32f device_id 000001f32f | EUI-64 0001f2000001f32f Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-18 15:07:55 +03:00
SND_MOTU_DEV_ENTRY(0x107800, &snd_motu_spec_traveler),
ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3 MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire series, produced in 2008/2014. This model consists of three chips for functionality on IEEE 1394 bus: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet processing and data block processing layer) * TI TMS320C6722 (Digital signal processing) This commit adds a support for this model, with its unique protocol as version 3. This protocol has some additional features to protocol version 2. * Support several optical interfaces. * Support a data chunk for return of reverb effect. * Have a quirk of tx packets. * Support heartbeat asynchronous transaction. In this protocol, series of transferred packets has some quirks. Below fields in CIP headers of the packets are out of IEC 61883-1: - SID (source node id): always 0x0d - DBS (data block size): always 0x04 - DBC (data block counter): always 0x00 - EOH (End of header): always 0x00 Below is an actual sample of transferred packets. quads CIP1 CIP2 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 520 0x0D040400 0x22FFFFFF 8 0x0D040400 0x22FFFFFF Status of clock is configured by write transactions to 0x'ffff'f000'0b14, as well as version 2, while meanings of fields are different from the former protocols. Modes of optical interfaces are configured by write transactions to 0x'ffff'f000'0c94. Drivers can register its address to receive heatbeat transactions from the unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is for the lower part. Nevertheless, this feature is not useless for this driver and this commit omits it. Each data block consists of two parts in a point of the number of included data chunks. In both of 'fixed' and 'differed' parts, the number of included data blocks are a multiple of 4, thus depending on models there's some empty data chunks. For example, 828mk3 includes one pair of empty data chunks in its fixed part. When optical interface is configured to S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part. To reduce consumption of CPU cycles with additional conditions/loops, this commit just exposes these empty chunks to user space as PCM channels. Additionally, 828mk3 has a non-negligible overhead to change its sampling transfer frequency. When softwares send asynchronous transaction to perform it, LED on the unit starts to blink. In a worst case, it continues blink during several seconds; e.g. 10 seconds. When stopping blinking, the unit seems to be prepared for the requested sampling transfer frequency. To wait for the preparation, this commit forces the driver to call task scheduler and applications sleeps for 4 seconds. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-22 15:30:28 +03:00
SND_MOTU_DEV_ENTRY(0x106800, &motu_828mk3), /* FireWire only. */
SND_MOTU_DEV_ENTRY(0x100800, &motu_828mk3), /* Hybrid. */
ALSA: firewire-motu: add support for MOTU Audio Express MOTU Audio Express is one of third generation in MOTU FireWire series, produced in 2011. This model consists of three chips: * TI TSB41AB2 (Physical layer for IEEE 1394 bus) * Microchip USB3300 (Hi-Speed USB Device with ULPI interface) * Xilinx Spartan-3A FPGA, XC3S400A (Link layer for IEEE 1394 bus, packet processing and data block processing layer) This commit adds support for this model. As I expected, it works with current implementaion of protocol version 3. On the other hand, the unit has a quirk to request subaction originated by any driver. 11:45:51.287643 firewire_ohci 0000:03:00.0: AT spd 2 tl 1f, ffc1 -> ffc0, -reserved-, QW req, fffff0000b14 = 02000200 11:45:51.289193 firewire_ohci 0000:03:00.0: AR spd 2 tl 1f, ffc0 -> ffc1, ack_complete, W resp 11:45:51.289381 fireire_core 0000:03:00.0: unsolicited response (source ffc0, tlabel 1f) 11:45:51.313071 firewire_ohci 0000:03:00.0: AT spd 2 tl 20, ffc1 -> ffc0, ack_pending , QW req, fffff0000b14 = 02000200 11:45:51.314539 firewire_ohci 0000:03:00.0: AR spd 2 tl 20, ffc0 -> ffc1, ack_complete, W resp In 1394 OHCI (rev.1.1), after OUTPUT_LAST* descriptors is processed, 'xferStaus' field is filled with 'ContextControl[0:15]' (see clause 7.1.3). 5 bits in LSB side of the field has ack code in acknowledge from the unit (see clause 7.2.2). A list of the code is shown in Table 3-2. As long as I investigated, in a case of the '-reserved-' acknowledge message from the unit, the field has 0x10. On the table, this value is 'Reserved for definition by future 1394 standards'. As long as I know, any specifications of IEEE 1394 has no such extensions, thus the unit is out of specification. Besides, I note that the unit does not always acknowledge with the invalid code. I guess this is a bug of firmware. I confirmed the bug in firmware version 1.04 and this is the latest one. $ cd linux-firewire-utils $ python2 ./src/crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410a756 bus_info_length 4, crc_length 16, crc 42838 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 000a8a7b device_id 00000a8a7b | EUI-64 0001f200000a8a7b root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00031680 directory_length 3, crc 5760 42c 120001f2 specifier id 430 13000033 version 434 17104800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 00025ef3 leaf_length 2, crc 24307 43c 0001f200 company_id 0001f2 | 440 000a8a7b device_id 00000a8a7b | EUI-64 0001f200000a8a7b Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-20 15:25:04 +03:00
SND_MOTU_DEV_ENTRY(0x104800, &motu_audio_express),
{ }
};
MODULE_DEVICE_TABLE(ieee1394, motu_id_table);
static struct fw_driver motu_driver = {
.driver = {
.owner = THIS_MODULE,
.name = KBUILD_MODNAME,
.bus = &fw_bus_type,
},
.probe = motu_probe,
.update = motu_bus_update,
.remove = motu_remove,
.id_table = motu_id_table,
};
static int __init alsa_motu_init(void)
{
return driver_register(&motu_driver.driver);
}
static void __exit alsa_motu_exit(void)
{
driver_unregister(&motu_driver.driver);
}
module_init(alsa_motu_init);
module_exit(alsa_motu_exit);