WSL2-Linux-Kernel/kernel/bpf/sysfs_btf.c

46 строки
1.1 KiB
C
Исходник Обычный вид История

btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* Provide kernel BTF information for introspection and use by eBPF tools.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/init.h>
#include <linux/sysfs.h>
/* See scripts/link-vmlinux.sh, gen_btf() func for details */
bpf: Support llvm-objcopy for vmlinux BTF Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Stanislav Fomichev <sdf@google.com> Tested-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
2020-03-19 01:27:46 +03:00
extern char __weak __start_BTF[];
extern char __weak __stop_BTF[];
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
static ssize_t
btf_vmlinux_read(struct file *file, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t len)
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
{
bpf: Support llvm-objcopy for vmlinux BTF Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Stanislav Fomichev <sdf@google.com> Tested-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
2020-03-19 01:27:46 +03:00
memcpy(buf, __start_BTF + off, len);
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
return len;
}
static struct bin_attribute bin_attr_btf_vmlinux __ro_after_init = {
.attr = { .name = "vmlinux", .mode = 0444, },
.read = btf_vmlinux_read,
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
};
static struct kobject *btf_kobj;
static int __init btf_vmlinux_init(void)
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
{
bpf: Support llvm-objcopy for vmlinux BTF Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Stanislav Fomichev <sdf@google.com> Tested-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
2020-03-19 01:27:46 +03:00
if (!__start_BTF)
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
return 0;
btf_kobj = kobject_create_and_add("btf", kernel_kobj);
if (!btf_kobj)
return -ENOMEM;
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
bpf: Support llvm-objcopy for vmlinux BTF Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Stanislav Fomichev <sdf@google.com> Tested-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
2020-03-19 01:27:46 +03:00
bin_attr_btf_vmlinux.size = __stop_BTF - __start_BTF;
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
return sysfs_create_bin_file(btf_kobj, &bin_attr_btf_vmlinux);
btf: expose BTF info through sysfs Make .BTF section allocated and expose its contents through sysfs. /sys/kernel/btf directory is created to contain all the BTFs present inside kernel. Currently there is only kernel's main BTF, represented as /sys/kernel/btf/kernel file. Once kernel modules' BTFs are supported, each module will expose its BTF as /sys/kernel/btf/<module-name> file. Current approach relies on a few pieces coming together: 1. pahole is used to take almost final vmlinux image (modulo .BTF and kallsyms) and generate .BTF section by converting DWARF info into BTF. This section is not allocated and not mapped to any segment, though, so is not yet accessible from inside kernel at runtime. 2. objcopy dumps .BTF contents into binary file and subsequently convert binary file into linkable object file with automatically generated symbols _binary__btf_kernel_bin_start and _binary__btf_kernel_bin_end, pointing to start and end, respectively, of BTF raw data. 3. final vmlinux image is generated by linking this object file (and kallsyms, if necessary). sysfs_btf.c then creates /sys/kernel/btf/kernel file and exposes embedded BTF contents through it. This allows, e.g., libbpf and bpftool access BTF info at well-known location, without resorting to searching for vmlinux image on disk (location of which is not standardized and vmlinux image might not be even available in some scenarios, e.g., inside qemu during testing). Alternative approach using .incbin assembler directive to embed BTF contents directly was attempted but didn't work, because sysfs_proc.o is not re-compiled during link-vmlinux.sh stage. This is required, though, to update embedded BTF data (initially empty data is embedded, then pahole generates BTF info and we need to regenerate sysfs_btf.o with updated contents, but it's too late at that point). If BTF couldn't be generated due to missing or too old pahole, sysfs_btf.c handles that gracefully by detecting that _binary__btf_kernel_bin_start (weak symbol) is 0 and not creating /sys/kernel/btf at all. v2->v3: - added Documentation/ABI/testing/sysfs-kernel-btf (Greg K-H); - created proper kobject (btf_kobj) for btf directory (Greg K-H); - undo v2 change of reusing vmlinux, as it causes extra kallsyms pass due to initially missing __binary__btf_kernel_bin_{start/end} symbols; v1->v2: - allow kallsyms stage to re-use vmlinux generated by gen_btf(); Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-12 21:39:47 +03:00
}
subsys_initcall(btf_vmlinux_init);