WSL2-Linux-Kernel/arch/mips/net/bpf_jit.c

1395 строки
35 KiB
C
Исходник Обычный вид История

/*
* Just-In-Time compiler for BPF filters on MIPS
*
* Copyright (c) 2014 Imagination Technologies Ltd.
* Author: Markos Chandras <markos.chandras@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; version 2 of the License.
*/
#include <linux/bitops.h>
#include <linux/compiler.h>
#include <linux/errno.h>
#include <linux/filter.h>
#include <linux/if_vlan.h>
#include <linux/kconfig.h>
#include <linux/moduleloader.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <asm/bitops.h>
#include <asm/cacheflush.h>
#include <asm/cpu-features.h>
#include <asm/uasm.h>
#include "bpf_jit.h"
/* ABI
*
* s0 1st scratch register
* s1 2nd scratch register
* s2 offset register
* s3 BPF register A
* s4 BPF register X
* s5 *skb
* s6 *scratch memory
*
* On entry (*bpf_func)(*skb, *filter)
* a0 = MIPS_R_A0 = skb;
* a1 = MIPS_R_A1 = filter;
*
* Stack
* ...
* M[15]
* M[14]
* M[13]
* ...
* M[0] <-- r_M
* saved reg k-1
* saved reg k-2
* ...
* saved reg 0 <-- r_sp
* <no argument area>
*
* Packet layout
*
* <--------------------- len ------------------------>
* <--skb-len(r_skb_hl)-->< ----- skb->data_len ------>
* ----------------------------------------------------
* | skb->data |
* ----------------------------------------------------
*/
#define RSIZE (sizeof(unsigned long))
#define ptr typeof(unsigned long)
/* ABI specific return values */
#ifdef CONFIG_32BIT /* O32 */
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define r_err MIPS_R_V1
#define r_val MIPS_R_V0
#else /* CONFIG_CPU_LITTLE_ENDIAN */
#define r_err MIPS_R_V0
#define r_val MIPS_R_V1
#endif
#else /* N64 */
#define r_err MIPS_R_V0
#define r_val MIPS_R_V0
#endif
#define r_ret MIPS_R_V0
/*
* Use 2 scratch registers to avoid pipeline interlocks.
* There is no overhead during epilogue and prologue since
* any of the $s0-$s6 registers will only be preserved if
* they are going to actually be used.
*/
#define r_s0 MIPS_R_S0 /* scratch reg 1 */
#define r_s1 MIPS_R_S1 /* scratch reg 2 */
#define r_off MIPS_R_S2
#define r_A MIPS_R_S3
#define r_X MIPS_R_S4
#define r_skb MIPS_R_S5
#define r_M MIPS_R_S6
#define r_tmp_imm MIPS_R_T6 /* No need to preserve this */
#define r_tmp MIPS_R_T7 /* No need to preserve this */
#define r_zero MIPS_R_ZERO
#define r_sp MIPS_R_SP
#define r_ra MIPS_R_RA
#define SCRATCH_OFF(k) (4 * (k))
/* JIT flags */
#define SEEN_CALL (1 << BPF_MEMWORDS)
#define SEEN_SREG_SFT (BPF_MEMWORDS + 1)
#define SEEN_SREG_BASE (1 << SEEN_SREG_SFT)
#define SEEN_SREG(x) (SEEN_SREG_BASE << (x))
#define SEEN_S0 SEEN_SREG(0)
#define SEEN_S1 SEEN_SREG(1)
#define SEEN_OFF SEEN_SREG(2)
#define SEEN_A SEEN_SREG(3)
#define SEEN_X SEEN_SREG(4)
#define SEEN_SKB SEEN_SREG(5)
#define SEEN_MEM SEEN_SREG(6)
/* Arguments used by JIT */
#define ARGS_USED_BY_JIT 2 /* only applicable to 64-bit */
#define SBIT(x) (1 << (x)) /* Signed version of BIT() */
/**
* struct jit_ctx - JIT context
* @skf: The sk_filter
* @prologue_bytes: Number of bytes for prologue
* @idx: Instruction index
* @flags: JIT flags
* @offsets: Instruction offsets
* @target: Memory location for the compiled filter
*/
struct jit_ctx {
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 07:34:16 +04:00
const struct bpf_prog *skf;
unsigned int prologue_bytes;
u32 idx;
u32 flags;
u32 *offsets;
u32 *target;
};
static inline int optimize_div(u32 *k)
{
/* power of 2 divides can be implemented with right shift */
if (!(*k & (*k-1))) {
*k = ilog2(*k);
return 1;
}
return 0;
}
static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx);
/* Simply emit the instruction if the JIT memory space has been allocated */
#define emit_instr(ctx, func, ...) \
do { \
if ((ctx)->target != NULL) { \
u32 *p = &(ctx)->target[ctx->idx]; \
uasm_i_##func(&p, ##__VA_ARGS__); \
} \
(ctx)->idx++; \
} while (0)
/*
* Similar to emit_instr but it must be used when we need to emit
* 32-bit or 64-bit instructions
*/
#define emit_long_instr(ctx, func, ...) \
do { \
if ((ctx)->target != NULL) { \
u32 *p = &(ctx)->target[ctx->idx]; \
UASM_i_##func(&p, ##__VA_ARGS__); \
} \
(ctx)->idx++; \
} while (0)
/* Determine if immediate is within the 16-bit signed range */
static inline bool is_range16(s32 imm)
{
return !(imm >= SBIT(15) || imm < -SBIT(15));
}
static inline void emit_addu(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, addu, dst, src1, src2);
}
static inline void emit_nop(struct jit_ctx *ctx)
{
emit_instr(ctx, nop);
}
/* Load a u32 immediate to a register */
static inline void emit_load_imm(unsigned int dst, u32 imm, struct jit_ctx *ctx)
{
if (ctx->target != NULL) {
/* addiu can only handle s16 */
if (!is_range16(imm)) {
u32 *p = &ctx->target[ctx->idx];
uasm_i_lui(&p, r_tmp_imm, (s32)imm >> 16);
p = &ctx->target[ctx->idx + 1];
uasm_i_ori(&p, dst, r_tmp_imm, imm & 0xffff);
} else {
u32 *p = &ctx->target[ctx->idx];
uasm_i_addiu(&p, dst, r_zero, imm);
}
}
ctx->idx++;
if (!is_range16(imm))
ctx->idx++;
}
static inline void emit_or(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, or, dst, src1, src2);
}
static inline void emit_ori(unsigned int dst, unsigned src, u32 imm,
struct jit_ctx *ctx)
{
if (imm >= BIT(16)) {
emit_load_imm(r_tmp, imm, ctx);
emit_or(dst, src, r_tmp, ctx);
} else {
emit_instr(ctx, ori, dst, src, imm);
}
}
static inline void emit_daddiu(unsigned int dst, unsigned int src,
int imm, struct jit_ctx *ctx)
{
/*
* Only used for stack, so the imm is relatively small
* and it fits in 15-bits
*/
emit_instr(ctx, daddiu, dst, src, imm);
}
static inline void emit_addiu(unsigned int dst, unsigned int src,
u32 imm, struct jit_ctx *ctx)
{
if (!is_range16(imm)) {
emit_load_imm(r_tmp, imm, ctx);
emit_addu(dst, r_tmp, src, ctx);
} else {
emit_instr(ctx, addiu, dst, src, imm);
}
}
static inline void emit_and(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, and, dst, src1, src2);
}
static inline void emit_andi(unsigned int dst, unsigned int src,
u32 imm, struct jit_ctx *ctx)
{
/* If imm does not fit in u16 then load it to register */
if (imm >= BIT(16)) {
emit_load_imm(r_tmp, imm, ctx);
emit_and(dst, src, r_tmp, ctx);
} else {
emit_instr(ctx, andi, dst, src, imm);
}
}
static inline void emit_xor(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, xor, dst, src1, src2);
}
static inline void emit_xori(ptr dst, ptr src, u32 imm, struct jit_ctx *ctx)
{
/* If imm does not fit in u16 then load it to register */
if (imm >= BIT(16)) {
emit_load_imm(r_tmp, imm, ctx);
emit_xor(dst, src, r_tmp, ctx);
} else {
emit_instr(ctx, xori, dst, src, imm);
}
}
static inline void emit_stack_offset(int offset, struct jit_ctx *ctx)
{
emit_long_instr(ctx, ADDIU, r_sp, r_sp, offset);
}
static inline void emit_subu(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, subu, dst, src1, src2);
}
static inline void emit_neg(unsigned int reg, struct jit_ctx *ctx)
{
emit_subu(reg, r_zero, reg, ctx);
}
static inline void emit_sllv(unsigned int dst, unsigned int src,
unsigned int sa, struct jit_ctx *ctx)
{
emit_instr(ctx, sllv, dst, src, sa);
}
static inline void emit_sll(unsigned int dst, unsigned int src,
unsigned int sa, struct jit_ctx *ctx)
{
/* sa is 5-bits long */
if (sa >= BIT(5))
/* Shifting >= 32 results in zero */
emit_jit_reg_move(dst, r_zero, ctx);
else
emit_instr(ctx, sll, dst, src, sa);
}
static inline void emit_srlv(unsigned int dst, unsigned int src,
unsigned int sa, struct jit_ctx *ctx)
{
emit_instr(ctx, srlv, dst, src, sa);
}
static inline void emit_srl(unsigned int dst, unsigned int src,
unsigned int sa, struct jit_ctx *ctx)
{
/* sa is 5-bits long */
if (sa >= BIT(5))
/* Shifting >= 32 results in zero */
emit_jit_reg_move(dst, r_zero, ctx);
else
emit_instr(ctx, srl, dst, src, sa);
}
static inline void emit_slt(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, slt, dst, src1, src2);
}
static inline void emit_sltu(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, sltu, dst, src1, src2);
}
static inline void emit_sltiu(unsigned dst, unsigned int src,
unsigned int imm, struct jit_ctx *ctx)
{
/* 16 bit immediate */
if (!is_range16((s32)imm)) {
emit_load_imm(r_tmp, imm, ctx);
emit_sltu(dst, src, r_tmp, ctx);
} else {
emit_instr(ctx, sltiu, dst, src, imm);
}
}
/* Store register on the stack */
static inline void emit_store_stack_reg(ptr reg, ptr base,
unsigned int offset,
struct jit_ctx *ctx)
{
emit_long_instr(ctx, SW, reg, offset, base);
}
static inline void emit_store(ptr reg, ptr base, unsigned int offset,
struct jit_ctx *ctx)
{
emit_instr(ctx, sw, reg, offset, base);
}
static inline void emit_load_stack_reg(ptr reg, ptr base,
unsigned int offset,
struct jit_ctx *ctx)
{
emit_long_instr(ctx, LW, reg, offset, base);
}
static inline void emit_load(unsigned int reg, unsigned int base,
unsigned int offset, struct jit_ctx *ctx)
{
emit_instr(ctx, lw, reg, offset, base);
}
static inline void emit_load_byte(unsigned int reg, unsigned int base,
unsigned int offset, struct jit_ctx *ctx)
{
emit_instr(ctx, lb, reg, offset, base);
}
static inline void emit_half_load(unsigned int reg, unsigned int base,
unsigned int offset, struct jit_ctx *ctx)
{
emit_instr(ctx, lh, reg, offset, base);
}
static inline void emit_mul(unsigned int dst, unsigned int src1,
unsigned int src2, struct jit_ctx *ctx)
{
emit_instr(ctx, mul, dst, src1, src2);
}
static inline void emit_div(unsigned int dst, unsigned int src,
struct jit_ctx *ctx)
{
if (ctx->target != NULL) {
u32 *p = &ctx->target[ctx->idx];
uasm_i_divu(&p, dst, src);
p = &ctx->target[ctx->idx + 1];
uasm_i_mflo(&p, dst);
}
ctx->idx += 2; /* 2 insts */
}
static inline void emit_mod(unsigned int dst, unsigned int src,
struct jit_ctx *ctx)
{
if (ctx->target != NULL) {
u32 *p = &ctx->target[ctx->idx];
uasm_i_divu(&p, dst, src);
p = &ctx->target[ctx->idx + 1];
uasm_i_mflo(&p, dst);
}
ctx->idx += 2; /* 2 insts */
}
static inline void emit_dsll(unsigned int dst, unsigned int src,
unsigned int sa, struct jit_ctx *ctx)
{
emit_instr(ctx, dsll, dst, src, sa);
}
static inline void emit_dsrl32(unsigned int dst, unsigned int src,
unsigned int sa, struct jit_ctx *ctx)
{
emit_instr(ctx, dsrl32, dst, src, sa);
}
static inline void emit_wsbh(unsigned int dst, unsigned int src,
struct jit_ctx *ctx)
{
emit_instr(ctx, wsbh, dst, src);
}
/* load pointer to register */
static inline void emit_load_ptr(unsigned int dst, unsigned int src,
int imm, struct jit_ctx *ctx)
{
/* src contains the base addr of the 32/64-pointer */
emit_long_instr(ctx, LW, dst, imm, src);
}
/* load a function pointer to register */
static inline void emit_load_func(unsigned int reg, ptr imm,
struct jit_ctx *ctx)
{
if (config_enabled(CONFIG_64BIT)) {
/* At this point imm is always 64-bit */
emit_load_imm(r_tmp, (u64)imm >> 32, ctx);
emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
emit_ori(r_tmp, r_tmp_imm, (imm >> 16) & 0xffff, ctx);
emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
emit_ori(reg, r_tmp_imm, imm & 0xffff, ctx);
} else {
emit_load_imm(reg, imm, ctx);
}
}
/* Move to real MIPS register */
static inline void emit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
{
emit_long_instr(ctx, ADDU, dst, src, r_zero);
}
/* Move to JIT (32-bit) register */
static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
{
emit_addu(dst, src, r_zero, ctx);
}
/* Compute the immediate value for PC-relative branches. */
static inline u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
{
if (ctx->target == NULL)
return 0;
/*
* We want a pc-relative branch. We only do forward branches
* so tgt is always after pc. tgt is the instruction offset
* we want to jump to.
* Branch on MIPS:
* I: target_offset <- sign_extend(offset)
* I+1: PC += target_offset (delay slot)
*
* ctx->idx currently points to the branch instruction
* but the offset is added to the delay slot so we need
* to subtract 4.
*/
return ctx->offsets[tgt] -
(ctx->idx * 4 - ctx->prologue_bytes) - 4;
}
static inline void emit_bcond(int cond, unsigned int reg1, unsigned int reg2,
unsigned int imm, struct jit_ctx *ctx)
{
if (ctx->target != NULL) {
u32 *p = &ctx->target[ctx->idx];
switch (cond) {
case MIPS_COND_EQ:
uasm_i_beq(&p, reg1, reg2, imm);
break;
case MIPS_COND_NE:
uasm_i_bne(&p, reg1, reg2, imm);
break;
case MIPS_COND_ALL:
uasm_i_b(&p, imm);
break;
default:
pr_warn("%s: Unhandled branch conditional: %d\n",
__func__, cond);
}
}
ctx->idx++;
}
static inline void emit_b(unsigned int imm, struct jit_ctx *ctx)
{
emit_bcond(MIPS_COND_ALL, r_zero, r_zero, imm, ctx);
}
static inline void emit_jalr(unsigned int link, unsigned int reg,
struct jit_ctx *ctx)
{
emit_instr(ctx, jalr, link, reg);
}
static inline void emit_jr(unsigned int reg, struct jit_ctx *ctx)
{
emit_instr(ctx, jr, reg);
}
static inline u16 align_sp(unsigned int num)
{
/* Double word alignment for 32-bit, quadword for 64-bit */
unsigned int align = config_enabled(CONFIG_64BIT) ? 16 : 8;
num = (num + (align - 1)) & -align;
return num;
}
static bool is_load_to_a(u16 inst)
{
switch (inst) {
case BPF_LD | BPF_W | BPF_LEN:
case BPF_LD | BPF_W | BPF_ABS:
case BPF_LD | BPF_H | BPF_ABS:
case BPF_LD | BPF_B | BPF_ABS:
return true;
default:
return false;
}
}
static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
{
int i = 0, real_off = 0;
u32 sflags, tmp_flags;
/* Adjust the stack pointer */
emit_stack_offset(-align_sp(offset), ctx);
if (ctx->flags & SEEN_CALL) {
/* Argument save area */
if (config_enabled(CONFIG_64BIT))
/* Bottom of current frame */
real_off = align_sp(offset) - RSIZE;
else
/* Top of previous frame */
real_off = align_sp(offset) + RSIZE;
emit_store_stack_reg(MIPS_R_A0, r_sp, real_off, ctx);
emit_store_stack_reg(MIPS_R_A1, r_sp, real_off + RSIZE, ctx);
real_off = 0;
}
tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
/* sflags is essentially a bitmap */
while (tmp_flags) {
if ((sflags >> i) & 0x1) {
emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
ctx);
real_off += RSIZE;
}
i++;
tmp_flags >>= 1;
}
/* save return address */
if (ctx->flags & SEEN_CALL) {
emit_store_stack_reg(r_ra, r_sp, real_off, ctx);
real_off += RSIZE;
}
/* Setup r_M leaving the alignment gap if necessary */
if (ctx->flags & SEEN_MEM) {
if (real_off % (RSIZE * 2))
real_off += RSIZE;
emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off);
}
}
static void restore_bpf_jit_regs(struct jit_ctx *ctx,
unsigned int offset)
{
int i, real_off = 0;
u32 sflags, tmp_flags;
if (ctx->flags & SEEN_CALL) {
if (config_enabled(CONFIG_64BIT))
/* Bottom of current frame */
real_off = align_sp(offset) - RSIZE;
else
/* Top of previous frame */
real_off = align_sp(offset) + RSIZE;
emit_load_stack_reg(MIPS_R_A0, r_sp, real_off, ctx);
emit_load_stack_reg(MIPS_R_A1, r_sp, real_off + RSIZE, ctx);
real_off = 0;
}
tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
/* sflags is a bitmap */
i = 0;
while (tmp_flags) {
if ((sflags >> i) & 0x1) {
emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
ctx);
real_off += RSIZE;
}
i++;
tmp_flags >>= 1;
}
/* restore return address */
if (ctx->flags & SEEN_CALL)
emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
/* Restore the sp and discard the scrach memory */
emit_stack_offset(align_sp(offset), ctx);
}
static unsigned int get_stack_depth(struct jit_ctx *ctx)
{
int sp_off = 0;
/* How may s* regs do we need to preserved? */
sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * RSIZE;
if (ctx->flags & SEEN_MEM)
sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */
if (ctx->flags & SEEN_CALL)
/*
* The JIT code make calls to external functions using 2
* arguments. Therefore, for o32 we don't need to allocate
* space because we don't care if the argumetns are lost
* across calls. We do need however to preserve incoming
* arguments but the space is already allocated for us by
* the caller. On the other hand, for n64, we need to allocate
* this space ourselves. We need to preserve $ra as well.
*/
sp_off += config_enabled(CONFIG_64BIT) ?
(ARGS_USED_BY_JIT + 1) * RSIZE : RSIZE;
/*
* Subtract the bytes for the last registers since we only care about
* the location on the stack pointer.
*/
return sp_off - RSIZE;
}
static void build_prologue(struct jit_ctx *ctx)
{
u16 first_inst = ctx->skf->insns[0].code;
int sp_off;
/* Calculate the total offset for the stack pointer */
sp_off = get_stack_depth(ctx);
save_bpf_jit_regs(ctx, sp_off);
if (ctx->flags & SEEN_SKB)
emit_reg_move(r_skb, MIPS_R_A0, ctx);
if (ctx->flags & SEEN_X)
emit_jit_reg_move(r_X, r_zero, ctx);
/* Do not leak kernel data to userspace */
if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
emit_jit_reg_move(r_A, r_zero, ctx);
}
static void build_epilogue(struct jit_ctx *ctx)
{
unsigned int sp_off;
/* Calculate the total offset for the stack pointer */
sp_off = get_stack_depth(ctx);
restore_bpf_jit_regs(ctx, sp_off);
/* Return */
emit_jr(r_ra, ctx);
emit_nop(ctx);
}
static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset)
{
u8 ret;
int err;
err = skb_copy_bits(skb, offset, &ret, 1);
return (u64)err << 32 | ret;
}
static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset)
{
u16 ret;
int err;
err = skb_copy_bits(skb, offset, &ret, 2);
return (u64)err << 32 | ntohs(ret);
}
static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset)
{
u32 ret;
int err;
err = skb_copy_bits(skb, offset, &ret, 4);
return (u64)err << 32 | ntohl(ret);
}
static int build_body(struct jit_ctx *ctx)
{
void *load_func[] = {jit_get_skb_b, jit_get_skb_h, jit_get_skb_w};
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 07:34:16 +04:00
const struct bpf_prog *prog = ctx->skf;
const struct sock_filter *inst;
unsigned int i, off, load_order, condt;
u32 k, b_off __maybe_unused;
for (i = 0; i < prog->len; i++) {
u16 code;
inst = &(prog->insns[i]);
pr_debug("%s: code->0x%02x, jt->0x%x, jf->0x%x, k->0x%x\n",
__func__, inst->code, inst->jt, inst->jf, inst->k);
k = inst->k;
code = bpf_anc_helper(inst);
if (ctx->target == NULL)
ctx->offsets[i] = ctx->idx * 4;
switch (code) {
case BPF_LD | BPF_IMM:
/* A <- k ==> li r_A, k */
ctx->flags |= SEEN_A;
emit_load_imm(r_A, k, ctx);
break;
case BPF_LD | BPF_W | BPF_LEN:
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
/* A <- len ==> lw r_A, offset(skb) */
ctx->flags |= SEEN_SKB | SEEN_A;
off = offsetof(struct sk_buff, len);
emit_load(r_A, r_skb, off, ctx);
break;
case BPF_LD | BPF_MEM:
/* A <- M[k] ==> lw r_A, offset(M) */
ctx->flags |= SEEN_MEM | SEEN_A;
emit_load(r_A, r_M, SCRATCH_OFF(k), ctx);
break;
case BPF_LD | BPF_W | BPF_ABS:
/* A <- P[k:4] */
load_order = 2;
goto load;
case BPF_LD | BPF_H | BPF_ABS:
/* A <- P[k:2] */
load_order = 1;
goto load;
case BPF_LD | BPF_B | BPF_ABS:
/* A <- P[k:1] */
load_order = 0;
load:
/* the interpreter will deal with the negative K */
if ((int)k < 0)
return -ENOTSUPP;
emit_load_imm(r_off, k, ctx);
load_common:
/*
* We may got here from the indirect loads so
* return if offset is negative.
*/
emit_slt(r_s0, r_off, r_zero, ctx);
emit_bcond(MIPS_COND_NE, r_s0, r_zero,
b_imm(prog->len, ctx), ctx);
emit_reg_move(r_ret, r_zero, ctx);
ctx->flags |= SEEN_CALL | SEEN_OFF | SEEN_S0 |
SEEN_SKB | SEEN_A;
emit_load_func(r_s0, (ptr)load_func[load_order],
ctx);
emit_reg_move(MIPS_R_A0, r_skb, ctx);
emit_jalr(MIPS_R_RA, r_s0, ctx);
/* Load second argument to delay slot */
emit_reg_move(MIPS_R_A1, r_off, ctx);
/* Check the error value */
if (config_enabled(CONFIG_64BIT)) {
/* Get error code from the top 32-bits */
emit_dsrl32(r_s0, r_val, 0, ctx);
/* Branch to 3 instructions ahead */
emit_bcond(MIPS_COND_NE, r_s0, r_zero, 3 << 2,
ctx);
} else {
/* Branch to 3 instructions ahead */
emit_bcond(MIPS_COND_NE, r_err, r_zero, 3 << 2,
ctx);
}
emit_nop(ctx);
/* We are good */
emit_b(b_imm(i + 1, ctx), ctx);
emit_jit_reg_move(r_A, r_val, ctx);
/* Return with error */
emit_b(b_imm(prog->len, ctx), ctx);
emit_reg_move(r_ret, r_zero, ctx);
break;
case BPF_LD | BPF_W | BPF_IND:
/* A <- P[X + k:4] */
load_order = 2;
goto load_ind;
case BPF_LD | BPF_H | BPF_IND:
/* A <- P[X + k:2] */
load_order = 1;
goto load_ind;
case BPF_LD | BPF_B | BPF_IND:
/* A <- P[X + k:1] */
load_order = 0;
load_ind:
ctx->flags |= SEEN_OFF | SEEN_X;
emit_addiu(r_off, r_X, k, ctx);
goto load_common;
case BPF_LDX | BPF_IMM:
/* X <- k */
ctx->flags |= SEEN_X;
emit_load_imm(r_X, k, ctx);
break;
case BPF_LDX | BPF_MEM:
/* X <- M[k] */
ctx->flags |= SEEN_X | SEEN_MEM;
emit_load(r_X, r_M, SCRATCH_OFF(k), ctx);
break;
case BPF_LDX | BPF_W | BPF_LEN:
/* X <- len */
ctx->flags |= SEEN_X | SEEN_SKB;
off = offsetof(struct sk_buff, len);
emit_load(r_X, r_skb, off, ctx);
break;
case BPF_LDX | BPF_B | BPF_MSH:
/* the interpreter will deal with the negative K */
if ((int)k < 0)
return -ENOTSUPP;
/* X <- 4 * (P[k:1] & 0xf) */
ctx->flags |= SEEN_X | SEEN_CALL | SEEN_S0 | SEEN_SKB;
/* Load offset to a1 */
emit_load_func(r_s0, (ptr)jit_get_skb_b, ctx);
/*
* This may emit two instructions so it may not fit
* in the delay slot. So use a0 in the delay slot.
*/
emit_load_imm(MIPS_R_A1, k, ctx);
emit_jalr(MIPS_R_RA, r_s0, ctx);
emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
/* Check the error value */
if (config_enabled(CONFIG_64BIT)) {
/* Top 32-bits of $v0 on 64-bit */
emit_dsrl32(r_s0, r_val, 0, ctx);
emit_bcond(MIPS_COND_NE, r_s0, r_zero,
3 << 2, ctx);
} else {
emit_bcond(MIPS_COND_NE, r_err, r_zero,
3 << 2, ctx);
}
/* No need for delay slot */
/* We are good */
/* X <- P[1:K] & 0xf */
emit_andi(r_X, r_val, 0xf, ctx);
/* X << 2 */
emit_b(b_imm(i + 1, ctx), ctx);
emit_sll(r_X, r_X, 2, ctx); /* delay slot */
/* Return with error */
emit_b(b_imm(prog->len, ctx), ctx);
emit_load_imm(r_ret, 0, ctx); /* delay slot */
break;
case BPF_ST:
/* M[k] <- A */
ctx->flags |= SEEN_MEM | SEEN_A;
emit_store(r_A, r_M, SCRATCH_OFF(k), ctx);
break;
case BPF_STX:
/* M[k] <- X */
ctx->flags |= SEEN_MEM | SEEN_X;
emit_store(r_X, r_M, SCRATCH_OFF(k), ctx);
break;
case BPF_ALU | BPF_ADD | BPF_K:
/* A += K */
ctx->flags |= SEEN_A;
emit_addiu(r_A, r_A, k, ctx);
break;
case BPF_ALU | BPF_ADD | BPF_X:
/* A += X */
ctx->flags |= SEEN_A | SEEN_X;
emit_addu(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_SUB | BPF_K:
/* A -= K */
ctx->flags |= SEEN_A;
emit_addiu(r_A, r_A, -k, ctx);
break;
case BPF_ALU | BPF_SUB | BPF_X:
/* A -= X */
ctx->flags |= SEEN_A | SEEN_X;
emit_subu(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_MUL | BPF_K:
/* A *= K */
/* Load K to scratch register before MUL */
ctx->flags |= SEEN_A | SEEN_S0;
emit_load_imm(r_s0, k, ctx);
emit_mul(r_A, r_A, r_s0, ctx);
break;
case BPF_ALU | BPF_MUL | BPF_X:
/* A *= X */
ctx->flags |= SEEN_A | SEEN_X;
emit_mul(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_DIV | BPF_K:
/* A /= k */
if (k == 1)
break;
if (optimize_div(&k)) {
ctx->flags |= SEEN_A;
emit_srl(r_A, r_A, k, ctx);
break;
}
ctx->flags |= SEEN_A | SEEN_S0;
emit_load_imm(r_s0, k, ctx);
emit_div(r_A, r_s0, ctx);
break;
case BPF_ALU | BPF_MOD | BPF_K:
/* A %= k */
if (k == 1 || optimize_div(&k)) {
ctx->flags |= SEEN_A;
emit_jit_reg_move(r_A, r_zero, ctx);
} else {
ctx->flags |= SEEN_A | SEEN_S0;
emit_load_imm(r_s0, k, ctx);
emit_mod(r_A, r_s0, ctx);
}
break;
case BPF_ALU | BPF_DIV | BPF_X:
/* A /= X */
ctx->flags |= SEEN_X | SEEN_A;
/* Check if r_X is zero */
emit_bcond(MIPS_COND_EQ, r_X, r_zero,
b_imm(prog->len, ctx), ctx);
emit_load_imm(r_val, 0, ctx); /* delay slot */
emit_div(r_A, r_X, ctx);
break;
case BPF_ALU | BPF_MOD | BPF_X:
/* A %= X */
ctx->flags |= SEEN_X | SEEN_A;
/* Check if r_X is zero */
emit_bcond(MIPS_COND_EQ, r_X, r_zero,
b_imm(prog->len, ctx), ctx);
emit_load_imm(r_val, 0, ctx); /* delay slot */
emit_mod(r_A, r_X, ctx);
break;
case BPF_ALU | BPF_OR | BPF_K:
/* A |= K */
ctx->flags |= SEEN_A;
emit_ori(r_A, r_A, k, ctx);
break;
case BPF_ALU | BPF_OR | BPF_X:
/* A |= X */
ctx->flags |= SEEN_A;
emit_ori(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_XOR | BPF_K:
/* A ^= k */
ctx->flags |= SEEN_A;
emit_xori(r_A, r_A, k, ctx);
break;
case BPF_ANC | SKF_AD_ALU_XOR_X:
case BPF_ALU | BPF_XOR | BPF_X:
/* A ^= X */
ctx->flags |= SEEN_A;
emit_xor(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_AND | BPF_K:
/* A &= K */
ctx->flags |= SEEN_A;
emit_andi(r_A, r_A, k, ctx);
break;
case BPF_ALU | BPF_AND | BPF_X:
/* A &= X */
ctx->flags |= SEEN_A | SEEN_X;
emit_and(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_LSH | BPF_K:
/* A <<= K */
ctx->flags |= SEEN_A;
emit_sll(r_A, r_A, k, ctx);
break;
case BPF_ALU | BPF_LSH | BPF_X:
/* A <<= X */
ctx->flags |= SEEN_A | SEEN_X;
emit_sllv(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_RSH | BPF_K:
/* A >>= K */
ctx->flags |= SEEN_A;
emit_srl(r_A, r_A, k, ctx);
break;
case BPF_ALU | BPF_RSH | BPF_X:
ctx->flags |= SEEN_A | SEEN_X;
emit_srlv(r_A, r_A, r_X, ctx);
break;
case BPF_ALU | BPF_NEG:
/* A = -A */
ctx->flags |= SEEN_A;
emit_neg(r_A, ctx);
break;
case BPF_JMP | BPF_JA:
/* pc += K */
emit_b(b_imm(i + k + 1, ctx), ctx);
emit_nop(ctx);
break;
case BPF_JMP | BPF_JEQ | BPF_K:
/* pc += ( A == K ) ? pc->jt : pc->jf */
condt = MIPS_COND_EQ | MIPS_COND_K;
goto jmp_cmp;
case BPF_JMP | BPF_JEQ | BPF_X:
ctx->flags |= SEEN_X;
/* pc += ( A == X ) ? pc->jt : pc->jf */
condt = MIPS_COND_EQ | MIPS_COND_X;
goto jmp_cmp;
case BPF_JMP | BPF_JGE | BPF_K:
/* pc += ( A >= K ) ? pc->jt : pc->jf */
condt = MIPS_COND_GE | MIPS_COND_K;
goto jmp_cmp;
case BPF_JMP | BPF_JGE | BPF_X:
ctx->flags |= SEEN_X;
/* pc += ( A >= X ) ? pc->jt : pc->jf */
condt = MIPS_COND_GE | MIPS_COND_X;
goto jmp_cmp;
case BPF_JMP | BPF_JGT | BPF_K:
/* pc += ( A > K ) ? pc->jt : pc->jf */
condt = MIPS_COND_GT | MIPS_COND_K;
goto jmp_cmp;
case BPF_JMP | BPF_JGT | BPF_X:
ctx->flags |= SEEN_X;
/* pc += ( A > X ) ? pc->jt : pc->jf */
condt = MIPS_COND_GT | MIPS_COND_X;
jmp_cmp:
/* Greater or Equal */
if ((condt & MIPS_COND_GE) ||
(condt & MIPS_COND_GT)) {
if (condt & MIPS_COND_K) { /* K */
ctx->flags |= SEEN_S0 | SEEN_A;
emit_sltiu(r_s0, r_A, k, ctx);
} else { /* X */
ctx->flags |= SEEN_S0 | SEEN_A |
SEEN_X;
emit_sltu(r_s0, r_A, r_X, ctx);
}
/* A < (K|X) ? r_scrach = 1 */
b_off = b_imm(i + inst->jf + 1, ctx);
emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off,
ctx);
emit_nop(ctx);
/* A > (K|X) ? scratch = 0 */
if (condt & MIPS_COND_GT) {
/* Checking for equality */
ctx->flags |= SEEN_S0 | SEEN_A | SEEN_X;
if (condt & MIPS_COND_K)
emit_load_imm(r_s0, k, ctx);
else
emit_jit_reg_move(r_s0, r_X,
ctx);
b_off = b_imm(i + inst->jf + 1, ctx);
emit_bcond(MIPS_COND_EQ, r_A, r_s0,
b_off, ctx);
emit_nop(ctx);
/* Finally, A > K|X */
b_off = b_imm(i + inst->jt + 1, ctx);
emit_b(b_off, ctx);
emit_nop(ctx);
} else {
/* A >= (K|X) so jump */
b_off = b_imm(i + inst->jt + 1, ctx);
emit_b(b_off, ctx);
emit_nop(ctx);
}
} else {
/* A == K|X */
if (condt & MIPS_COND_K) { /* K */
ctx->flags |= SEEN_S0 | SEEN_A;
emit_load_imm(r_s0, k, ctx);
/* jump true */
b_off = b_imm(i + inst->jt + 1, ctx);
emit_bcond(MIPS_COND_EQ, r_A, r_s0,
b_off, ctx);
emit_nop(ctx);
/* jump false */
b_off = b_imm(i + inst->jf + 1,
ctx);
emit_bcond(MIPS_COND_NE, r_A, r_s0,
b_off, ctx);
emit_nop(ctx);
} else { /* X */
/* jump true */
ctx->flags |= SEEN_A | SEEN_X;
b_off = b_imm(i + inst->jt + 1,
ctx);
emit_bcond(MIPS_COND_EQ, r_A, r_X,
b_off, ctx);
emit_nop(ctx);
/* jump false */
b_off = b_imm(i + inst->jf + 1, ctx);
emit_bcond(MIPS_COND_NE, r_A, r_X,
b_off, ctx);
emit_nop(ctx);
}
}
break;
case BPF_JMP | BPF_JSET | BPF_K:
ctx->flags |= SEEN_S0 | SEEN_S1 | SEEN_A;
/* pc += (A & K) ? pc -> jt : pc -> jf */
emit_load_imm(r_s1, k, ctx);
emit_and(r_s0, r_A, r_s1, ctx);
/* jump true */
b_off = b_imm(i + inst->jt + 1, ctx);
emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
emit_nop(ctx);
/* jump false */
b_off = b_imm(i + inst->jf + 1, ctx);
emit_b(b_off, ctx);
emit_nop(ctx);
break;
case BPF_JMP | BPF_JSET | BPF_X:
ctx->flags |= SEEN_S0 | SEEN_X | SEEN_A;
/* pc += (A & X) ? pc -> jt : pc -> jf */
emit_and(r_s0, r_A, r_X, ctx);
/* jump true */
b_off = b_imm(i + inst->jt + 1, ctx);
emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
emit_nop(ctx);
/* jump false */
b_off = b_imm(i + inst->jf + 1, ctx);
emit_b(b_off, ctx);
emit_nop(ctx);
break;
case BPF_RET | BPF_A:
ctx->flags |= SEEN_A;
if (i != prog->len - 1)
/*
* If this is not the last instruction
* then jump to the epilogue
*/
emit_b(b_imm(prog->len, ctx), ctx);
emit_reg_move(r_ret, r_A, ctx); /* delay slot */
break;
case BPF_RET | BPF_K:
/*
* It can emit two instructions so it does not fit on
* the delay slot.
*/
emit_load_imm(r_ret, k, ctx);
if (i != prog->len - 1) {
/*
* If this is not the last instruction
* then jump to the epilogue
*/
emit_b(b_imm(prog->len, ctx), ctx);
emit_nop(ctx);
}
break;
case BPF_MISC | BPF_TAX:
/* X = A */
ctx->flags |= SEEN_X | SEEN_A;
emit_jit_reg_move(r_X, r_A, ctx);
break;
case BPF_MISC | BPF_TXA:
/* A = X */
ctx->flags |= SEEN_A | SEEN_X;
emit_jit_reg_move(r_A, r_X, ctx);
break;
/* AUX */
case BPF_ANC | SKF_AD_PROTOCOL:
/* A = ntohs(skb->protocol */
ctx->flags |= SEEN_SKB | SEEN_OFF | SEEN_A;
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
protocol) != 2);
off = offsetof(struct sk_buff, protocol);
emit_half_load(r_A, r_skb, off, ctx);
#ifdef CONFIG_CPU_LITTLE_ENDIAN
/* This needs little endian fixup */
if (cpu_has_wsbh) {
/* R2 and later have the wsbh instruction */
emit_wsbh(r_A, r_A, ctx);
} else {
/* Get first byte */
emit_andi(r_tmp_imm, r_A, 0xff, ctx);
/* Shift it */
emit_sll(r_tmp, r_tmp_imm, 8, ctx);
/* Get second byte */
emit_srl(r_tmp_imm, r_A, 8, ctx);
emit_andi(r_tmp_imm, r_tmp_imm, 0xff, ctx);
/* Put everyting together in r_A */
emit_or(r_A, r_tmp, r_tmp_imm, ctx);
}
#endif
break;
case BPF_ANC | SKF_AD_CPU:
ctx->flags |= SEEN_A | SEEN_OFF;
/* A = current_thread_info()->cpu */
BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info,
cpu) != 4);
off = offsetof(struct thread_info, cpu);
/* $28/gp points to the thread_info struct */
emit_load(r_A, 28, off, ctx);
break;
case BPF_ANC | SKF_AD_IFINDEX:
/* A = skb->dev->ifindex */
ctx->flags |= SEEN_SKB | SEEN_A | SEEN_S0;
off = offsetof(struct sk_buff, dev);
/* Load *dev pointer */
emit_load_ptr(r_s0, r_skb, off, ctx);
/* error (0) in the delay slot */
emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
b_imm(prog->len, ctx), ctx);
emit_reg_move(r_ret, r_zero, ctx);
BUILD_BUG_ON(FIELD_SIZEOF(struct net_device,
ifindex) != 4);
off = offsetof(struct net_device, ifindex);
emit_load(r_A, r_s0, off, ctx);
break;
case BPF_ANC | SKF_AD_MARK:
ctx->flags |= SEEN_SKB | SEEN_A;
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
off = offsetof(struct sk_buff, mark);
emit_load(r_A, r_skb, off, ctx);
break;
case BPF_ANC | SKF_AD_RXHASH:
ctx->flags |= SEEN_SKB | SEEN_A;
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4);
off = offsetof(struct sk_buff, hash);
emit_load(r_A, r_skb, off, ctx);
break;
case BPF_ANC | SKF_AD_VLAN_TAG:
case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
ctx->flags |= SEEN_SKB | SEEN_S0 | SEEN_A;
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
vlan_tci) != 2);
off = offsetof(struct sk_buff, vlan_tci);
emit_half_load(r_s0, r_skb, off, ctx);
if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) {
emit_andi(r_A, r_s0, (u16)~VLAN_TAG_PRESENT, ctx);
} else {
emit_andi(r_A, r_s0, VLAN_TAG_PRESENT, ctx);
/* return 1 if present */
emit_sltu(r_A, r_zero, r_A, ctx);
}
break;
case BPF_ANC | SKF_AD_PKTTYPE:
ctx->flags |= SEEN_SKB;
emit_load_byte(r_tmp, r_skb, PKT_TYPE_OFFSET(), ctx);
/* Keep only the last 3 bits */
emit_andi(r_A, r_tmp, PKT_TYPE_MAX, ctx);
#ifdef __BIG_ENDIAN_BITFIELD
/* Get the actual packet type to the lower 3 bits */
emit_srl(r_A, r_A, 5, ctx);
#endif
break;
case BPF_ANC | SKF_AD_QUEUE:
ctx->flags |= SEEN_SKB | SEEN_A;
BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
queue_mapping) != 2);
BUILD_BUG_ON(offsetof(struct sk_buff,
queue_mapping) > 0xff);
off = offsetof(struct sk_buff, queue_mapping);
emit_half_load(r_A, r_skb, off, ctx);
break;
default:
pr_debug("%s: Unhandled opcode: 0x%02x\n", __FILE__,
inst->code);
return -1;
}
}
/* compute offsets only during the first pass */
if (ctx->target == NULL)
ctx->offsets[i] = ctx->idx * 4;
return 0;
}
int bpf_jit_enable __read_mostly;
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 07:34:16 +04:00
void bpf_jit_compile(struct bpf_prog *fp)
{
struct jit_ctx ctx;
unsigned int alloc_size, tmp_idx;
if (!bpf_jit_enable)
return;
memset(&ctx, 0, sizeof(ctx));
ctx.offsets = kcalloc(fp->len, sizeof(*ctx.offsets), GFP_KERNEL);
if (ctx.offsets == NULL)
return;
ctx.skf = fp;
if (build_body(&ctx))
goto out;
tmp_idx = ctx.idx;
build_prologue(&ctx);
ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
/* just to complete the ctx.idx count */
build_epilogue(&ctx);
alloc_size = 4 * ctx.idx;
ctx.target = module_alloc(alloc_size);
if (ctx.target == NULL)
goto out;
/* Clean it */
memset(ctx.target, 0, alloc_size);
ctx.idx = 0;
/* Generate the actual JIT code */
build_prologue(&ctx);
build_body(&ctx);
build_epilogue(&ctx);
/* Update the icache */
flush_icache_range((ptr)ctx.target, (ptr)(ctx.target + ctx.idx));
if (bpf_jit_enable > 1)
/* Dump JIT code */
bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
fp->bpf_func = (void *)ctx.target;
fp->jited = true;
out:
kfree(ctx.offsets);
}
net: filter: split 'struct sk_filter' into socket and bpf parts clean up names related to socket filtering and bpf in the following way: - everything that deals with sockets keeps 'sk_*' prefix - everything that is pure BPF is changed to 'bpf_*' prefix split 'struct sk_filter' into struct sk_filter { atomic_t refcnt; struct rcu_head rcu; struct bpf_prog *prog; }; and struct bpf_prog { u32 jited:1, len:31; struct sock_fprog_kern *orig_prog; unsigned int (*bpf_func)(const struct sk_buff *skb, const struct bpf_insn *filter); union { struct sock_filter insns[0]; struct bpf_insn insnsi[0]; struct work_struct work; }; }; so that 'struct bpf_prog' can be used independent of sockets and cleans up 'unattached' bpf use cases split SK_RUN_FILTER macro into: SK_RUN_FILTER to be used with 'struct sk_filter *' and BPF_PROG_RUN to be used with 'struct bpf_prog *' __sk_filter_release(struct sk_filter *) gains __bpf_prog_release(struct bpf_prog *) helper function also perform related renames for the functions that work with 'struct bpf_prog *', since they're on the same lines: sk_filter_size -> bpf_prog_size sk_filter_select_runtime -> bpf_prog_select_runtime sk_filter_free -> bpf_prog_free sk_unattached_filter_create -> bpf_prog_create sk_unattached_filter_destroy -> bpf_prog_destroy sk_store_orig_filter -> bpf_prog_store_orig_filter sk_release_orig_filter -> bpf_release_orig_filter __sk_migrate_filter -> bpf_migrate_filter __sk_prepare_filter -> bpf_prepare_filter API for attaching classic BPF to a socket stays the same: sk_attach_filter(prog, struct sock *)/sk_detach_filter(struct sock *) and SK_RUN_FILTER(struct sk_filter *, ctx) to execute a program which is used by sockets, tun, af_packet API for 'unattached' BPF programs becomes: bpf_prog_create(struct bpf_prog **)/bpf_prog_destroy(struct bpf_prog *) and BPF_PROG_RUN(struct bpf_prog *, ctx) to execute a program which is used by isdn, ppp, team, seccomp, ptp, xt_bpf, cls_bpf, test_bpf Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31 07:34:16 +04:00
void bpf_jit_free(struct bpf_prog *fp)
{
if (fp->jited)
module_free(NULL, fp->bpf_func);
net: bpf: make eBPF interpreter images read-only With eBPF getting more extended and exposure to user space is on it's way, hardening the memory range the interpreter uses to steer its command flow seems appropriate. This patch moves the to be interpreted bytecode to read-only pages. In case we execute a corrupted BPF interpreter image for some reason e.g. caused by an attacker which got past a verifier stage, it would not only provide arbitrary read/write memory access but arbitrary function calls as well. After setting up the BPF interpreter image, its contents do not change until destruction time, thus we can setup the image on immutable made pages in order to mitigate modifications to that code. The idea is derived from commit 314beb9bcabf ("x86: bpf_jit_comp: secure bpf jit against spraying attacks"). This is possible because bpf_prog is not part of sk_filter anymore. After setup bpf_prog cannot be altered during its life-time. This prevents any modifications to the entire bpf_prog structure (incl. function/JIT image pointer). Every eBPF program (including classic BPF that are migrated) have to call bpf_prog_select_runtime() to select either interpreter or a JIT image as a last setup step, and they all are being freed via bpf_prog_free(), including non-JIT. Therefore, we can easily integrate this into the eBPF life-time, plus since we directly allocate a bpf_prog, we have no performance penalty. Tested with seccomp and test_bpf testsuite in JIT/non-JIT mode and manual inspection of kernel_page_tables. Brad Spengler proposed the same idea via Twitter during development of this patch. Joint work with Hannes Frederic Sowa. Suggested-by: Brad Spengler <spender@grsecurity.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-03 00:53:44 +04:00
bpf_prog_unlock_free(fp);
}