WSL2-Linux-Kernel/drivers/leds/leds-lm3532.c

742 строки
18 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
// TI LM3532 LED driver
// Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
// https://www.ti.com/lit/ds/symlink/lm3532.pdf
#include <linux/i2c.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/types.h>
#include <linux/regulator/consumer.h>
#include <linux/module.h>
#include <uapi/linux/uleds.h>
#include <linux/gpio/consumer.h>
#define LM3532_NAME "lm3532-led"
#define LM3532_BL_MODE_MANUAL 0x00
#define LM3532_BL_MODE_ALS 0x01
#define LM3532_REG_OUTPUT_CFG 0x10
#define LM3532_REG_STARTSHUT_RAMP 0x11
#define LM3532_REG_RT_RAMP 0x12
#define LM3532_REG_PWM_A_CFG 0x13
#define LM3532_REG_PWM_B_CFG 0x14
#define LM3532_REG_PWM_C_CFG 0x15
#define LM3532_REG_ZONE_CFG_A 0x16
#define LM3532_REG_CTRL_A_FS_CURR 0x17
#define LM3532_REG_ZONE_CFG_B 0x18
#define LM3532_REG_CTRL_B_FS_CURR 0x19
#define LM3532_REG_ZONE_CFG_C 0x1a
#define LM3532_REG_CTRL_C_FS_CURR 0x1b
#define LM3532_REG_ENABLE 0x1d
#define LM3532_ALS_CONFIG 0x23
#define LM3532_REG_ZN_0_HI 0x60
#define LM3532_REG_ZN_0_LO 0x61
#define LM3532_REG_ZN_1_HI 0x62
#define LM3532_REG_ZN_1_LO 0x63
#define LM3532_REG_ZN_2_HI 0x64
#define LM3532_REG_ZN_2_LO 0x65
#define LM3532_REG_ZN_3_HI 0x66
#define LM3532_REG_ZN_3_LO 0x67
#define LM3532_REG_ZONE_TRGT_A 0x70
#define LM3532_REG_ZONE_TRGT_B 0x75
#define LM3532_REG_ZONE_TRGT_C 0x7a
#define LM3532_REG_MAX 0x7e
/* Control Enable */
#define LM3532_CTRL_A_ENABLE BIT(0)
#define LM3532_CTRL_B_ENABLE BIT(1)
#define LM3532_CTRL_C_ENABLE BIT(2)
/* PWM Zone Control */
#define LM3532_PWM_ZONE_MASK 0x7c
#define LM3532_PWM_ZONE_0_EN BIT(2)
#define LM3532_PWM_ZONE_1_EN BIT(3)
#define LM3532_PWM_ZONE_2_EN BIT(4)
#define LM3532_PWM_ZONE_3_EN BIT(5)
#define LM3532_PWM_ZONE_4_EN BIT(6)
/* Brightness Configuration */
#define LM3532_I2C_CTRL BIT(0)
#define LM3532_ALS_CTRL 0
#define LM3532_LINEAR_MAP BIT(1)
#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4))
#define LM3532_ZONE_0 0
#define LM3532_ZONE_1 BIT(2)
#define LM3532_ZONE_2 BIT(3)
#define LM3532_ZONE_3 (BIT(2) | BIT(3))
#define LM3532_ZONE_4 BIT(4)
#define LM3532_ENABLE_ALS BIT(3)
#define LM3532_ALS_SEL_SHIFT 6
/* Zone Boundary Register */
#define LM3532_ALS_WINDOW_mV 2000
#define LM3532_ALS_ZB_MAX 4
#define LM3532_ALS_OFFSET_mV 2
#define LM3532_CONTROL_A 0
#define LM3532_CONTROL_B 1
#define LM3532_CONTROL_C 2
#define LM3532_MAX_CONTROL_BANKS 3
#define LM3532_MAX_LED_STRINGS 3
#define LM3532_OUTPUT_CFG_MASK 0x3
#define LM3532_BRT_VAL_ADJUST 8
#define LM3532_RAMP_DOWN_SHIFT 3
#define LM3532_NUM_RAMP_VALS 8
#define LM3532_NUM_AVG_VALS 8
#define LM3532_NUM_IMP_VALS 32
#define LM3532_FS_CURR_MIN 5000
#define LM3532_FS_CURR_MAX 29800
#define LM3532_FS_CURR_STEP 800
/*
* struct lm3532_als_data
* @config: value of ALS configuration register
* @als1_imp_sel: value of ALS1 resistor select register
* @als2_imp_sel: value of ALS2 resistor select register
* @als_avrg_time: ALS averaging time
* @als_input_mode: ALS input mode for brightness control
* @als_vmin: Minimum ALS voltage
* @als_vmax: Maximum ALS voltage
* @zone_lo: values of ALS lo ZB(Zone Boundary) registers
* @zone_hi: values of ALS hi ZB(Zone Boundary) registers
*/
struct lm3532_als_data {
u8 config;
u8 als1_imp_sel;
u8 als2_imp_sel;
u8 als_avrg_time;
u8 als_input_mode;
u32 als_vmin;
u32 als_vmax;
u8 zones_lo[LM3532_ALS_ZB_MAX];
u8 zones_hi[LM3532_ALS_ZB_MAX];
};
/**
* struct lm3532_led
* @led_dev: led class device
* @priv: Pointer the device data structure
* @control_bank: Control bank the LED is associated to
* @mode: Mode of the LED string
* @ctrl_brt_pointer: Zone target register that controls the sink
* @num_leds: Number of LED strings are supported in this array
* @full_scale_current: The full-scale current setting for the current sink.
* @led_strings: The LED strings supported in this array
* @enabled: Enabled status
*/
struct lm3532_led {
struct led_classdev led_dev;
struct lm3532_data *priv;
int control_bank;
int mode;
int ctrl_brt_pointer;
int num_leds;
int full_scale_current;
unsigned int enabled:1;
u32 led_strings[LM3532_MAX_CONTROL_BANKS];
};
/**
* struct lm3532_data
* @enable_gpio: Hardware enable gpio
* @regulator: regulator
* @client: i2c client
* @regmap: Devices register map
* @dev: Pointer to the devices device struct
* @lock: Lock for reading/writing the device
* @als_data: Pointer to the als data struct
* @runtime_ramp_up: Runtime ramp up setting
* @runtime_ramp_down: Runtime ramp down setting
* @leds: Array of LED strings
*/
struct lm3532_data {
struct gpio_desc *enable_gpio;
struct regulator *regulator;
struct i2c_client *client;
struct regmap *regmap;
struct device *dev;
struct mutex lock;
struct lm3532_als_data *als_data;
u32 runtime_ramp_up;
u32 runtime_ramp_down;
struct lm3532_led leds[];
};
static const struct reg_default lm3532_reg_defs[] = {
{LM3532_REG_OUTPUT_CFG, 0xe4},
{LM3532_REG_STARTSHUT_RAMP, 0xc0},
{LM3532_REG_RT_RAMP, 0xc0},
{LM3532_REG_PWM_A_CFG, 0x82},
{LM3532_REG_PWM_B_CFG, 0x82},
{LM3532_REG_PWM_C_CFG, 0x82},
{LM3532_REG_ZONE_CFG_A, 0xf1},
{LM3532_REG_CTRL_A_FS_CURR, 0xf3},
{LM3532_REG_ZONE_CFG_B, 0xf1},
{LM3532_REG_CTRL_B_FS_CURR, 0xf3},
{LM3532_REG_ZONE_CFG_C, 0xf1},
{LM3532_REG_CTRL_C_FS_CURR, 0xf3},
{LM3532_REG_ENABLE, 0xf8},
{LM3532_ALS_CONFIG, 0x44},
{LM3532_REG_ZN_0_HI, 0x35},
{LM3532_REG_ZN_0_LO, 0x33},
{LM3532_REG_ZN_1_HI, 0x6a},
{LM3532_REG_ZN_1_LO, 0x66},
{LM3532_REG_ZN_2_HI, 0xa1},
{LM3532_REG_ZN_2_LO, 0x99},
{LM3532_REG_ZN_3_HI, 0xdc},
{LM3532_REG_ZN_3_LO, 0xcc},
};
static const struct regmap_config lm3532_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = LM3532_REG_MAX,
.reg_defaults = lm3532_reg_defs,
.num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs),
.cache_type = REGCACHE_FLAT,
};
static const int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330,
92500, 7400, 6170, 5290,
4630, 4110, 3700, 3360,
3080, 2850, 2640, 2440,
2310, 2180, 2060, 1950,
1850, 1760, 1680, 1610,
1540, 1480, 1420, 1370,
1320, 1280, 1230, 1190};
static int lm3532_get_als_imp_index(int als_imped)
{
int i;
if (als_imped > als_imp_table[1])
return 0;
if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1])
return LM3532_NUM_IMP_VALS - 1;
for (i = 1; i < LM3532_NUM_IMP_VALS; i++) {
if (als_imped == als_imp_table[i])
return i;
/* Find an approximate index by looking up the table */
if (als_imped < als_imp_table[i - 1] &&
als_imped > als_imp_table[i]) {
if (als_imped - als_imp_table[i - 1] <
als_imp_table[i] - als_imped)
return i + 1;
else
return i;
}
}
return -EINVAL;
}
static int lm3532_get_index(const int table[], int size, int value)
{
int i;
for (i = 1; i < size; i++) {
if (value == table[i])
return i;
/* Find an approximate index by looking up the table */
if (value > table[i - 1] &&
value < table[i]) {
if (value - table[i - 1] < table[i] - value)
return i - 1;
else
return i;
}
}
return -EINVAL;
}
static const int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680,
1433360, 286720, 573440,
1146880, 2293760};
static int lm3532_get_als_avg_index(int avg_time)
{
if (avg_time <= als_avrg_table[0])
return 0;
if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1])
return LM3532_NUM_AVG_VALS - 1;
return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS,
avg_time);
}
static const int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 8192,
16384, 32768, 65536};
static int lm3532_get_ramp_index(int ramp_time)
{
if (ramp_time <= ramp_table[0])
return 0;
if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1])
return LM3532_NUM_RAMP_VALS - 1;
return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS,
ramp_time);
}
/* Caller must take care of locking */
static int lm3532_led_enable(struct lm3532_led *led_data)
{
int ctrl_en_val = BIT(led_data->control_bank);
int ret;
if (led_data->enabled)
return 0;
ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
ctrl_en_val, ctrl_en_val);
if (ret) {
dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
return ret;
}
ret = regulator_enable(led_data->priv->regulator);
if (ret < 0)
return ret;
led_data->enabled = 1;
return 0;
}
/* Caller must take care of locking */
static int lm3532_led_disable(struct lm3532_led *led_data)
{
int ctrl_en_val = BIT(led_data->control_bank);
int ret;
if (!led_data->enabled)
return 0;
ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
ctrl_en_val, 0);
if (ret) {
dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
return ret;
}
ret = regulator_disable(led_data->priv->regulator);
if (ret < 0)
return ret;
led_data->enabled = 0;
return 0;
}
static int lm3532_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brt_val)
{
struct lm3532_led *led =
container_of(led_cdev, struct lm3532_led, led_dev);
u8 brightness_reg;
int ret;
mutex_lock(&led->priv->lock);
if (led->mode == LM3532_ALS_CTRL) {
if (brt_val > LED_OFF)
ret = lm3532_led_enable(led);
else
ret = lm3532_led_disable(led);
goto unlock;
}
if (brt_val == LED_OFF) {
ret = lm3532_led_disable(led);
goto unlock;
}
ret = lm3532_led_enable(led);
if (ret)
goto unlock;
brightness_reg = LM3532_REG_ZONE_TRGT_A + led->control_bank * 5 +
(led->ctrl_brt_pointer >> 2);
ret = regmap_write(led->priv->regmap, brightness_reg, brt_val);
unlock:
mutex_unlock(&led->priv->lock);
return ret;
}
static int lm3532_init_registers(struct lm3532_led *led)
{
struct lm3532_data *drvdata = led->priv;
unsigned int runtime_ramp_val;
unsigned int output_cfg_val = 0;
unsigned int output_cfg_shift = 0;
unsigned int output_cfg_mask = 0;
unsigned int brightness_config_reg;
unsigned int brightness_config_val;
int fs_current_reg;
int fs_current_val;
int ret, i;
if (drvdata->enable_gpio)
gpiod_direction_output(drvdata->enable_gpio, 1);
brightness_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2;
/*
* This could be hard coded to the default value but the control
* brightness register may have changed during boot.
*/
ret = regmap_read(drvdata->regmap, brightness_config_reg,
&led->ctrl_brt_pointer);
if (ret)
return ret;
led->ctrl_brt_pointer &= LM3532_ZONE_MASK;
brightness_config_val = led->ctrl_brt_pointer | led->mode;
ret = regmap_write(drvdata->regmap, brightness_config_reg,
brightness_config_val);
if (ret)
return ret;
if (led->full_scale_current) {
fs_current_reg = LM3532_REG_CTRL_A_FS_CURR + led->control_bank * 2;
fs_current_val = (led->full_scale_current - LM3532_FS_CURR_MIN) /
LM3532_FS_CURR_STEP;
ret = regmap_write(drvdata->regmap, fs_current_reg,
fs_current_val);
if (ret)
return ret;
}
for (i = 0; i < led->num_leds; i++) {
output_cfg_shift = led->led_strings[i] * 2;
output_cfg_val |= (led->control_bank << output_cfg_shift);
output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift;
}
ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG,
output_cfg_mask, output_cfg_val);
if (ret)
return ret;
runtime_ramp_val = drvdata->runtime_ramp_up |
(drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT);
return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP,
runtime_ramp_val);
}
static int lm3532_als_configure(struct lm3532_data *priv,
struct lm3532_led *led)
{
struct lm3532_als_data *als = priv->als_data;
u32 als_vmin, als_vmax, als_vstep;
int zone_reg = LM3532_REG_ZN_0_HI;
int ret;
int i;
als_vmin = als->als_vmin;
als_vmax = als->als_vmax;
als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2);
for (i = 0; i < LM3532_ALS_ZB_MAX; i++) {
als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) *
LED_FULL) / 1000;
als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV +
als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
zone_reg = LM3532_REG_ZN_0_HI + i * 2;
ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]);
if (ret)
return ret;
zone_reg += 1;
ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]);
if (ret)
return ret;
}
als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
(als->als_input_mode << LM3532_ALS_SEL_SHIFT));
return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
}
static int lm3532_parse_als(struct lm3532_data *priv)
{
struct lm3532_als_data *als;
int als_avg_time;
int als_impedance;
int ret;
als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL);
if (als == NULL)
return -ENOMEM;
ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin",
&als->als_vmin);
if (ret)
als->als_vmin = 0;
ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax",
&als->als_vmax);
if (ret)
als->als_vmax = LM3532_ALS_WINDOW_mV;
if (als->als_vmax > LM3532_ALS_WINDOW_mV) {
ret = -EINVAL;
return ret;
}
ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel",
&als_impedance);
if (ret)
als->als1_imp_sel = 0;
else
als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance);
ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel",
&als_impedance);
if (ret)
als->als2_imp_sel = 0;
else
als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance);
ret = device_property_read_u32(&priv->client->dev, "ti,als-avrg-time-us",
&als_avg_time);
if (ret)
als->als_avrg_time = 0;
else
als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time);
ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode",
&als->als_input_mode);
if (ret)
als->als_input_mode = 0;
if (als->als_input_mode > LM3532_BL_MODE_ALS) {
ret = -EINVAL;
return ret;
}
priv->als_data = als;
return ret;
}
static int lm3532_parse_node(struct lm3532_data *priv)
{
struct fwnode_handle *child = NULL;
struct lm3532_led *led;
int control_bank;
u32 ramp_time;
size_t i = 0;
int ret;
priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
"enable", GPIOD_OUT_LOW);
if (IS_ERR(priv->enable_gpio))
priv->enable_gpio = NULL;
priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
if (IS_ERR(priv->regulator))
priv->regulator = NULL;
ret = device_property_read_u32(&priv->client->dev, "ramp-up-us",
&ramp_time);
if (ret)
dev_info(&priv->client->dev, "ramp-up-ms property missing\n");
else
priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time);
ret = device_property_read_u32(&priv->client->dev, "ramp-down-us",
&ramp_time);
if (ret)
dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
else
priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time);
device_for_each_child_node(priv->dev, child) {
struct led_init_data idata = {
.fwnode = child,
.default_label = ":",
.devicename = priv->client->name,
};
led = &priv->leds[i];
ret = fwnode_property_read_u32(child, "reg", &control_bank);
if (ret) {
dev_err(&priv->client->dev, "reg property missing\n");
goto child_out;
}
if (control_bank > LM3532_CONTROL_C) {
dev_err(&priv->client->dev, "Control bank invalid\n");
continue;
}
led->control_bank = control_bank;
ret = fwnode_property_read_u32(child, "ti,led-mode",
&led->mode);
if (ret) {
dev_err(&priv->client->dev, "ti,led-mode property missing\n");
goto child_out;
}
if (fwnode_property_present(child, "led-max-microamp") &&
fwnode_property_read_u32(child, "led-max-microamp",
&led->full_scale_current))
dev_err(&priv->client->dev,
"Failed getting led-max-microamp\n");
else
led->full_scale_current = min(led->full_scale_current,
LM3532_FS_CURR_MAX);
if (led->mode == LM3532_BL_MODE_ALS) {
led->mode = LM3532_ALS_CTRL;
ret = lm3532_parse_als(priv);
if (ret)
dev_err(&priv->client->dev, "Failed to parse als\n");
else
lm3532_als_configure(priv, led);
} else {
led->mode = LM3532_I2C_CTRL;
}
led->num_leds = fwnode_property_count_u32(child, "led-sources");
if (led->num_leds > LM3532_MAX_LED_STRINGS) {
dev_err(&priv->client->dev, "Too many LED string defined\n");
continue;
}
ret = fwnode_property_read_u32_array(child, "led-sources",
led->led_strings,
led->num_leds);
if (ret) {
dev_err(&priv->client->dev, "led-sources property missing\n");
goto child_out;
}
led->priv = priv;
led->led_dev.brightness_set_blocking = lm3532_brightness_set;
ret = devm_led_classdev_register_ext(priv->dev, &led->led_dev, &idata);
if (ret) {
dev_err(&priv->client->dev, "led register err: %d\n",
ret);
goto child_out;
}
ret = lm3532_init_registers(led);
if (ret) {
dev_err(&priv->client->dev, "register init err: %d\n",
ret);
goto child_out;
}
i++;
}
return 0;
child_out:
fwnode_handle_put(child);
return ret;
}
static int lm3532_probe(struct i2c_client *client)
{
struct lm3532_data *drvdata;
int ret = 0;
int count;
count = device_get_child_node_count(&client->dev);
if (!count) {
dev_err(&client->dev, "LEDs are not defined in device tree!");
return -ENODEV;
}
drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count),
GFP_KERNEL);
if (drvdata == NULL)
return -ENOMEM;
drvdata->client = client;
drvdata->dev = &client->dev;
drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config);
if (IS_ERR(drvdata->regmap)) {
ret = PTR_ERR(drvdata->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
mutex_init(&drvdata->lock);
i2c_set_clientdata(client, drvdata);
ret = lm3532_parse_node(drvdata);
if (ret) {
dev_err(&client->dev, "Failed to parse node\n");
return ret;
}
return ret;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 11:02:30 +03:00
static void lm3532_remove(struct i2c_client *client)
{
struct lm3532_data *drvdata = i2c_get_clientdata(client);
mutex_destroy(&drvdata->lock);
if (drvdata->enable_gpio)
gpiod_direction_output(drvdata->enable_gpio, 0);
}
static const struct of_device_id of_lm3532_leds_match[] = {
{ .compatible = "ti,lm3532", },
{},
};
MODULE_DEVICE_TABLE(of, of_lm3532_leds_match);
static const struct i2c_device_id lm3532_id[] = {
{LM3532_NAME, 0},
{}
};
MODULE_DEVICE_TABLE(i2c, lm3532_id);
static struct i2c_driver lm3532_i2c_driver = {
.probe_new = lm3532_probe,
.remove = lm3532_remove,
.id_table = lm3532_id,
.driver = {
.name = LM3532_NAME,
.of_match_table = of_lm3532_leds_match,
},
};
module_i2c_driver(lm3532_i2c_driver);
MODULE_DESCRIPTION("Back Light driver for LM3532");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");