48 строки
1.8 KiB
Plaintext
48 строки
1.8 KiB
Plaintext
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain
|
||
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain_bias
|
||
|
KernelVersion: 4.18
|
||
|
Contact: linux-iio@vger.kernel.org
|
||
|
Description:
|
||
|
This sensor has an automatic gain control (agc) loop
|
||
|
which sets the analog signal levels at an optimum
|
||
|
level by controlling programmable gain amplifiers. The
|
||
|
criteria for optimal gain is determined by the sensor.
|
||
|
|
||
|
Return the actual gain value as an integer in [0; 65536]
|
||
|
range when read from.
|
||
|
|
||
|
The agc gain read when measuring crosstalk shall be
|
||
|
written into in_proximity0_agc_gain_bias.
|
||
|
|
||
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_a
|
||
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_b
|
||
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_a
|
||
|
What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_b
|
||
|
KernelVersion: 4.18
|
||
|
Contact: linux-iio@vger.kernel.org
|
||
|
Description:
|
||
|
The sensor is able to perform correction of distance
|
||
|
measurements due to changing temperature and ambient
|
||
|
light conditions. It can be programmed to correct for
|
||
|
a second order error polynomial.
|
||
|
|
||
|
Phase data has to be collected when temperature and
|
||
|
ambient light are modulated independently.
|
||
|
|
||
|
Then a least squares curve fit to a second order
|
||
|
polynomial has to be generated from the data. The
|
||
|
resultant curves have the form ax^2 + bx + c.
|
||
|
|
||
|
From those two curves, a and b coefficients shall be
|
||
|
stored in in_proximity0_calib_phase_temp_a and
|
||
|
in_proximity0_calib_phase_temp_b for temperature and
|
||
|
in in_proximity0_calib_phase_light_a and
|
||
|
in_proximity0_calib_phase_light_b for ambient light.
|
||
|
|
||
|
Those values must be integer in [0; 8355840] range.
|
||
|
|
||
|
Finally, the c constant is set by the sensor
|
||
|
internally.
|
||
|
|
||
|
The value stored in sensor is displayed when read from.
|