WSL2-Linux-Kernel/arch/alpha/kernel/sys_wildfire.c

351 строка
8.6 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/alpha/kernel/sys_wildfire.c
*
* Wildfire support.
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/ptrace.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_wildfire.h>
#include <asm/hwrpb.h>
#include <asm/tlbflush.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
static unsigned long cached_irq_mask[WILDFIRE_NR_IRQS/(sizeof(long)*8)];
DEFINE_SPINLOCK(wildfire_irq_lock);
static int doing_init_irq_hw = 0;
static void
wildfire_update_irq_hw(unsigned int irq)
{
int qbbno = (irq >> 8) & (WILDFIRE_MAX_QBB - 1);
int pcano = (irq >> 6) & (WILDFIRE_PCA_PER_QBB - 1);
wildfire_pca *pca;
volatile unsigned long * enable0;
if (!WILDFIRE_PCA_EXISTS(qbbno, pcano)) {
if (!doing_init_irq_hw) {
printk(KERN_ERR "wildfire_update_irq_hw:"
" got irq %d for non-existent PCA %d"
" on QBB %d.\n",
irq, pcano, qbbno);
}
return;
}
pca = WILDFIRE_pca(qbbno, pcano);
enable0 = (unsigned long *) &pca->pca_int[0].enable; /* ??? */
*enable0 = cached_irq_mask[qbbno * WILDFIRE_PCA_PER_QBB + pcano];
mb();
*enable0;
}
static void __init
wildfire_init_irq_hw(void)
{
#if 0
register wildfire_pca * pca = WILDFIRE_pca(0, 0);
volatile unsigned long * enable0, * enable1, * enable2, *enable3;
volatile unsigned long * target0, * target1, * target2, *target3;
enable0 = (unsigned long *) &pca->pca_int[0].enable;
enable1 = (unsigned long *) &pca->pca_int[1].enable;
enable2 = (unsigned long *) &pca->pca_int[2].enable;
enable3 = (unsigned long *) &pca->pca_int[3].enable;
target0 = (unsigned long *) &pca->pca_int[0].target;
target1 = (unsigned long *) &pca->pca_int[1].target;
target2 = (unsigned long *) &pca->pca_int[2].target;
target3 = (unsigned long *) &pca->pca_int[3].target;
*enable0 = *enable1 = *enable2 = *enable3 = 0;
*target0 = (1UL<<8) | WILDFIRE_QBB(0);
*target1 = *target2 = *target3 = 0;
mb();
*enable0; *enable1; *enable2; *enable3;
*target0; *target1; *target2; *target3;
#else
int i;
doing_init_irq_hw = 1;
/* Need to update only once for every possible PCA. */
for (i = 0; i < WILDFIRE_NR_IRQS; i+=WILDFIRE_IRQ_PER_PCA)
wildfire_update_irq_hw(i);
doing_init_irq_hw = 0;
#endif
}
static void
wildfire_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq < 16)
i8259a_enable_irq(d);
spin_lock(&wildfire_irq_lock);
set_bit(irq, &cached_irq_mask);
wildfire_update_irq_hw(irq);
spin_unlock(&wildfire_irq_lock);
}
static void
wildfire_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq < 16)
i8259a_disable_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
wildfire_update_irq_hw(irq);
spin_unlock(&wildfire_irq_lock);
}
static void
wildfire_mask_and_ack_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq < 16)
i8259a_mask_and_ack_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
wildfire_update_irq_hw(irq);
spin_unlock(&wildfire_irq_lock);
}
static struct irq_chip wildfire_irq_type = {
.name = "WILDFIRE",
.irq_unmask = wildfire_enable_irq,
.irq_mask = wildfire_disable_irq,
.irq_mask_ack = wildfire_mask_and_ack_irq,
};
static void __init
wildfire_init_irq_per_pca(int qbbno, int pcano)
{
int i, irq_bias;
static struct irqaction isa_enable = {
.handler = no_action,
.name = "isa_enable",
};
irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
+ pcano * WILDFIRE_IRQ_PER_PCA;
#if 0
unsigned long io_bias;
/* Only need the following for first PCI bus per PCA. */
io_bias = WILDFIRE_IO(qbbno, pcano<<1) - WILDFIRE_IO_BIAS;
outb(0, DMA1_RESET_REG + io_bias);
outb(0, DMA2_RESET_REG + io_bias);
outb(DMA_MODE_CASCADE, DMA2_MODE_REG + io_bias);
outb(0, DMA2_MASK_REG + io_bias);
#endif
#if 0
/* ??? Not sure how to do this, yet... */
init_i8259a_irqs(); /* ??? */
#endif
for (i = 0; i < 16; ++i) {
if (i == 2)
continue;
irq_set_chip_and_handler(i + irq_bias, &wildfire_irq_type,
handle_level_irq);
irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
irq_set_chip_and_handler(36 + irq_bias, &wildfire_irq_type,
handle_level_irq);
irq_set_status_flags(36 + irq_bias, IRQ_LEVEL);
for (i = 40; i < 64; ++i) {
irq_set_chip_and_handler(i + irq_bias, &wildfire_irq_type,
handle_level_irq);
irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
setup_irq(32+irq_bias, &isa_enable);
}
static void __init
wildfire_init_irq(void)
{
int qbbno, pcano;
#if 1
wildfire_init_irq_hw();
init_i8259a_irqs();
#endif
for (qbbno = 0; qbbno < WILDFIRE_MAX_QBB; qbbno++) {
if (WILDFIRE_QBB_EXISTS(qbbno)) {
for (pcano = 0; pcano < WILDFIRE_PCA_PER_QBB; pcano++) {
if (WILDFIRE_PCA_EXISTS(qbbno, pcano)) {
wildfire_init_irq_per_pca(qbbno, pcano);
}
}
}
}
}
static void
wildfire_device_interrupt(unsigned long vector)
{
int irq;
irq = (vector - 0x800) >> 4;
/*
* bits 10-8: source QBB ID
* bits 7-6: PCA
* bits 5-0: irq in PCA
*/
handle_irq(irq);
return;
}
/*
* PCI Fixup configuration.
*
* Summary per PCA (2 PCI or HIPPI buses):
*
* Bit Meaning
* 0-15 ISA
*
*32 ISA summary
*33 SMI
*34 NMI
*36 builtin QLogic SCSI (or slot 0 if no IO module)
*40 Interrupt Line A from slot 2 PCI0
*41 Interrupt Line B from slot 2 PCI0
*42 Interrupt Line C from slot 2 PCI0
*43 Interrupt Line D from slot 2 PCI0
*44 Interrupt Line A from slot 3 PCI0
*45 Interrupt Line B from slot 3 PCI0
*46 Interrupt Line C from slot 3 PCI0
*47 Interrupt Line D from slot 3 PCI0
*
*48 Interrupt Line A from slot 4 PCI1
*49 Interrupt Line B from slot 4 PCI1
*50 Interrupt Line C from slot 4 PCI1
*51 Interrupt Line D from slot 4 PCI1
*52 Interrupt Line A from slot 5 PCI1
*53 Interrupt Line B from slot 5 PCI1
*54 Interrupt Line C from slot 5 PCI1
*55 Interrupt Line D from slot 5 PCI1
*56 Interrupt Line A from slot 6 PCI1
*57 Interrupt Line B from slot 6 PCI1
*58 Interrupt Line C from slot 6 PCI1
*50 Interrupt Line D from slot 6 PCI1
*60 Interrupt Line A from slot 7 PCI1
*61 Interrupt Line B from slot 7 PCI1
*62 Interrupt Line C from slot 7 PCI1
*63 Interrupt Line D from slot 7 PCI1
*
*
* IdSel
* 0 Cypress Bridge I/O (ISA summary interrupt)
* 1 64 bit PCI 0 option slot 1 (SCSI QLogic builtin)
* 2 64 bit PCI 0 option slot 2
* 3 64 bit PCI 0 option slot 3
* 4 64 bit PCI 1 option slot 4
* 5 64 bit PCI 1 option slot 5
* 6 64 bit PCI 1 option slot 6
* 7 64 bit PCI 1 option slot 7
*/
alpha/PCI: Move pci_map_irq()/pci_swizzle() out of initdata The introduction of {map/swizzle}_irq() hooks in the struct pci_host_bridge allowed to replace the pci_fixup_irqs() PCI IRQ allocation in alpha arch PCI code with per-bridge map/swizzle functions with commit 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks"). As a side effect of converting PCI IRQ allocation to the struct pci_host_bridge {map/swizzle}_irq() hooks mechanism, the actual PCI IRQ allocation function (ie pci_assign_irq()) is carried out per-device in pci_device_probe() that is called when a PCI device driver is about to be probed. This means that, for drivers compiled as loadable modules, the actual PCI device IRQ allocation can now happen after the system has booted so the struct pci_host_bridge {map/swizzle}_irq() hooks pci_assign_irq() relies on must stay valid after the system has booted so that PCI core can carry out PCI IRQ allocation correctly. Most of the alpha board structures pci_map_irq() and pci_swizzle() hooks (that are used to initialize their struct pci_host_bridge equivalent through the alpha_mv global variable - that represents the struct alpha_machine_vector of the running kernel) are marked as __init/__initdata; this causes freed memory dereferences when PCI IRQ allocation is carried out after the kernel has booted (ie when loading PCI drivers as loadable module) because when the kernel tries to bind the PCI device to its (module) driver, the function pci_assign_irq() is called, that in turn retrieves the struct pci_host_bridge {map/swizzle}_irq() hooks to carry out PCI IRQ allocation; if those hooks are marked as __init code/__initdata they point at freed/invalid memory. Fix the issue by removing the __init/__initdata markers from all subarch struct alpha_machine_vector.pci_map_irq()/pci_swizzle() functions (and data). Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/alpine.LRH.2.21.1710251043170.7098@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Meelis Roos <mroos@linux.ee> Cc: Matt Turner <mattst88@gmail.com>
2017-10-26 17:54:15 +03:00
static int
PCI: Make the struct pci_dev * argument of pci_fixup_irqs const. Aside of the usual motivation for constification, this function has a history of being abused a hook for interrupt and other fixups so I turned this function const ages ago in the MIPS code but it should be done treewide. Due to function pointer passing in varous places a few other functions had to be constified as well. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Anton Vorontsov <avorontsov@mvista.com> To: Chris Metcalf <cmetcalf@tilera.com> To: Colin Cross <ccross@android.com> Acked-by: "David S. Miller" <davem@davemloft.net> To: Eric Miao <eric.y.miao@gmail.com> To: Erik Gilling <konkers@android.com> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> To: "H. Peter Anvin" <hpa@zytor.com> To: Imre Kaloz <kaloz@openwrt.org> To: Ingo Molnar <mingo@redhat.com> To: Ivan Kokshaysky <ink@jurassic.park.msu.ru> To: Jesse Barnes <jbarnes@virtuousgeek.org> To: Krzysztof Halasa <khc@pm.waw.pl> To: Lennert Buytenhek <kernel@wantstofly.org> To: Matt Turner <mattst88@gmail.com> To: Nicolas Pitre <nico@fluxnic.net> To: Olof Johansson <olof@lixom.net> Acked-by: Paul Mundt <lethal@linux-sh.org> To: Richard Henderson <rth@twiddle.net> To: Russell King <linux@arm.linux.org.uk> To: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-pci@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-06-10 18:30:21 +04:00
wildfire_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
alpha/PCI: Move pci_map_irq()/pci_swizzle() out of initdata The introduction of {map/swizzle}_irq() hooks in the struct pci_host_bridge allowed to replace the pci_fixup_irqs() PCI IRQ allocation in alpha arch PCI code with per-bridge map/swizzle functions with commit 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks"). As a side effect of converting PCI IRQ allocation to the struct pci_host_bridge {map/swizzle}_irq() hooks mechanism, the actual PCI IRQ allocation function (ie pci_assign_irq()) is carried out per-device in pci_device_probe() that is called when a PCI device driver is about to be probed. This means that, for drivers compiled as loadable modules, the actual PCI device IRQ allocation can now happen after the system has booted so the struct pci_host_bridge {map/swizzle}_irq() hooks pci_assign_irq() relies on must stay valid after the system has booted so that PCI core can carry out PCI IRQ allocation correctly. Most of the alpha board structures pci_map_irq() and pci_swizzle() hooks (that are used to initialize their struct pci_host_bridge equivalent through the alpha_mv global variable - that represents the struct alpha_machine_vector of the running kernel) are marked as __init/__initdata; this causes freed memory dereferences when PCI IRQ allocation is carried out after the kernel has booted (ie when loading PCI drivers as loadable module) because when the kernel tries to bind the PCI device to its (module) driver, the function pci_assign_irq() is called, that in turn retrieves the struct pci_host_bridge {map/swizzle}_irq() hooks to carry out PCI IRQ allocation; if those hooks are marked as __init code/__initdata they point at freed/invalid memory. Fix the issue by removing the __init/__initdata markers from all subarch struct alpha_machine_vector.pci_map_irq()/pci_swizzle() functions (and data). Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks") Link: http://lkml.kernel.org/r/alpine.LRH.2.21.1710251043170.7098@math.ut.ee Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Meelis Roos <mroos@linux.ee> Cc: Matt Turner <mattst88@gmail.com>
2017-10-26 17:54:15 +03:00
static char irq_tab[8][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 0 ISA Bridge */
{ 36, 36, 36+1, 36+2, 36+3}, /* IdSel 1 SCSI builtin */
{ 40, 40, 40+1, 40+2, 40+3}, /* IdSel 2 PCI 0 slot 2 */
{ 44, 44, 44+1, 44+2, 44+3}, /* IdSel 3 PCI 0 slot 3 */
{ 48, 48, 48+1, 48+2, 48+3}, /* IdSel 4 PCI 1 slot 4 */
{ 52, 52, 52+1, 52+2, 52+3}, /* IdSel 5 PCI 1 slot 5 */
{ 56, 56, 56+1, 56+2, 56+3}, /* IdSel 6 PCI 1 slot 6 */
{ 60, 60, 60+1, 60+2, 60+3}, /* IdSel 7 PCI 1 slot 7 */
};
long min_idsel = 0, max_idsel = 7, irqs_per_slot = 5;
struct pci_controller *hose = dev->sysdata;
int irq = COMMON_TABLE_LOOKUP;
if (irq > 0) {
int qbbno = hose->index >> 3;
int pcano = (hose->index >> 1) & 3;
irq += (qbbno << 8) + (pcano << 6);
}
return irq;
}
/*
* The System Vectors
*/
struct alpha_machine_vector wildfire_mv __initmv = {
.vector_name = "WILDFIRE",
DO_EV6_MMU,
DO_DEFAULT_RTC,
DO_WILDFIRE_IO,
.machine_check = wildfire_machine_check,
.max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
.min_io_address = DEFAULT_IO_BASE,
.min_mem_address = DEFAULT_MEM_BASE,
.nr_irqs = WILDFIRE_NR_IRQS,
.device_interrupt = wildfire_device_interrupt,
.init_arch = wildfire_init_arch,
.init_irq = wildfire_init_irq,
.init_rtc = common_init_rtc,
.init_pci = common_init_pci,
.kill_arch = wildfire_kill_arch,
.pci_map_irq = wildfire_map_irq,
.pci_swizzle = common_swizzle,
.pa_to_nid = wildfire_pa_to_nid,
.cpuid_to_nid = wildfire_cpuid_to_nid,
.node_mem_start = wildfire_node_mem_start,
.node_mem_size = wildfire_node_mem_size,
};
ALIAS_MV(wildfire)