WSL2-Linux-Kernel/arch/arm/mach-davinci/psc.h

220 строки
6.5 KiB
C
Исходник Обычный вид История

/*
* DaVinci Power & Sleep Controller (PSC) defines
*
* Copyright (C) 2006 Texas Instruments.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifndef __ASM_ARCH_PSC_H
#define __ASM_ARCH_PSC_H
#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
#define DAVINCI_LPSC_VPSSMSTR 0
#define DAVINCI_LPSC_VPSSSLV 1
#define DAVINCI_LPSC_TPCC 2
#define DAVINCI_LPSC_TPTC0 3
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
#define DAVINCI_LPSC_UHPI 12
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
#define DAVINCI_LPSC_UART1 20
#define DAVINCI_LPSC_UART2 21
#define DAVINCI_LPSC_SPI 22
#define DAVINCI_LPSC_PWM0 23
#define DAVINCI_LPSC_PWM1 24
#define DAVINCI_LPSC_PWM2 25
#define DAVINCI_LPSC_GPIO 26
#define DAVINCI_LPSC_TIMER0 27
#define DAVINCI_LPSC_TIMER1 28
#define DAVINCI_LPSC_TIMER2 29
#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
#define DAVINCI_LPSC_ARM 31
#define DAVINCI_LPSC_SCR2 32
#define DAVINCI_LPSC_SCR3 33
#define DAVINCI_LPSC_SCR4 34
#define DAVINCI_LPSC_CROSSBAR 35
#define DAVINCI_LPSC_CFG27 36
#define DAVINCI_LPSC_CFG3 37
#define DAVINCI_LPSC_CFG5 38
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
#define DM355_LPSC_TIMER3 5
#define DM355_LPSC_SPI1 6
#define DM355_LPSC_MMC_SD1 7
#define DM355_LPSC_McBSP1 8
#define DM355_LPSC_PWM3 10
#define DM355_LPSC_SPI2 11
#define DM355_LPSC_RTO 12
#define DM355_LPSC_VPSS_DAC 41
/* DM365 */
#define DM365_LPSC_TIMER3 5
#define DM365_LPSC_SPI1 6
#define DM365_LPSC_MMC_SD1 7
#define DM365_LPSC_McBSP1 8
#define DM365_LPSC_PWM3 10
#define DM365_LPSC_SPI2 11
#define DM365_LPSC_RTO 12
#define DM365_LPSC_TIMER4 17
#define DM365_LPSC_SPI0 22
#define DM365_LPSC_SPI3 38
#define DM365_LPSC_SPI4 39
#define DM365_LPSC_EMAC 40
#define DM365_LPSC_VOICE_CODEC 44
#define DM365_LPSC_DAC_CLK 46
#define DM365_LPSC_VPSSMSTR 47
#define DM365_LPSC_MJCP 50
/*
* LPSC Assignments
*/
#define DM646X_LPSC_ARM 0
#define DM646X_LPSC_C64X_CPU 1
#define DM646X_LPSC_HDVICP0 2
#define DM646X_LPSC_HDVICP1 3
#define DM646X_LPSC_TPCC 4
#define DM646X_LPSC_TPTC0 5
#define DM646X_LPSC_TPTC1 6
#define DM646X_LPSC_TPTC2 7
#define DM646X_LPSC_TPTC3 8
#define DM646X_LPSC_PCI 13
#define DM646X_LPSC_EMAC 14
#define DM646X_LPSC_VDCE 15
#define DM646X_LPSC_VPSSMSTR 16
#define DM646X_LPSC_VPSSSLV 17
#define DM646X_LPSC_TSIF0 18
#define DM646X_LPSC_TSIF1 19
#define DM646X_LPSC_DDR_EMIF 20
#define DM646X_LPSC_AEMIF 21
#define DM646X_LPSC_McASP0 22
#define DM646X_LPSC_McASP1 23
#define DM646X_LPSC_CRGEN0 24
#define DM646X_LPSC_CRGEN1 25
#define DM646X_LPSC_UART0 26
#define DM646X_LPSC_UART1 27
#define DM646X_LPSC_UART2 28
#define DM646X_LPSC_PWM0 29
#define DM646X_LPSC_PWM1 30
#define DM646X_LPSC_I2C 31
#define DM646X_LPSC_SPI 32
#define DM646X_LPSC_GPIO 33
#define DM646X_LPSC_TIMER0 34
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
/* PSC0 defines */
#define DA8XX_LPSC0_TPCC 0
#define DA8XX_LPSC0_TPTC0 1
#define DA8XX_LPSC0_TPTC1 2
#define DA8XX_LPSC0_EMIF25 3
#define DA8XX_LPSC0_SPI0 4
#define DA8XX_LPSC0_MMC_SD 5
#define DA8XX_LPSC0_AINTC 6
#define DA8XX_LPSC0_ARM_RAM_ROM 7
#define DA8XX_LPSC0_SECU_MGR 8
#define DA8XX_LPSC0_UART0 9
#define DA8XX_LPSC0_SCR0_SS 10
#define DA8XX_LPSC0_SCR1_SS 11
#define DA8XX_LPSC0_SCR2_SS 12
#define DA8XX_LPSC0_PRUSS 13
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA8XX_LPSC0_ARM 14
#define DA8XX_LPSC0_GEM 15
/* PSC1 defines */
#define DA850_LPSC1_TPCC1 0
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA8XX_LPSC1_USB20 1
#define DA8XX_LPSC1_USB11 2
#define DA8XX_LPSC1_GPIO 3
#define DA8XX_LPSC1_UHPI 4
#define DA8XX_LPSC1_CPGMAC 5
#define DA8XX_LPSC1_EMIF3C 6
#define DA8XX_LPSC1_McASP0 7
#define DA830_LPSC1_McASP1 8
#define DA850_LPSC1_SATA 8
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA830_LPSC1_McASP2 9
#define DA850_LPSC1_VPIF 9
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA8XX_LPSC1_SPI1 10
#define DA8XX_LPSC1_I2C 11
#define DA8XX_LPSC1_UART1 12
#define DA8XX_LPSC1_UART2 13
#define DA850_LPSC1_McBSP0 14
#define DA850_LPSC1_McBSP1 15
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA8XX_LPSC1_LCDC 16
#define DA8XX_LPSC1_PWM 17
#define DA850_LPSC1_MMC_SD1 18
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA8XX_LPSC1_ECAP 20
#define DA830_LPSC1_EQEP 21
#define DA850_LPSC1_TPTC2 21
davinci: da8xx: Add base DA830/OMAP-L137 SoC support The da830/omap l137 is a new SoC from TI that is similar to the davinci line. Since its so similar to davinci, put the support for the da830 in the same directory as the davinci code. There are differences, however. Some of those differences prevent support for davinci and da830 platforms to work in the same kernel binary. Those differences are: 1) Different physical address for RAM. This is relevant to Makefile.boot addresses and PHYS_OFFSET. The Makefile.boot issue isn't truly a kernel issue but it means u-boot won't work with a uImage including both architectures. The PHYS_OFFSET issue is addressed by the "Allow for runtime-determined PHYS_OFFSET" patch by Lennert Buytenhek but it hasn't been accepted yet. 2) Different uart addresses. This is only an issue for the 'addruart' assembly macro when CONFIG_DEBUG_LL is enabled. Since the code in that macro is called so early (e.g., by _error_p in kernel/head.S when the processor lookup fails), we can't determine what platform the kernel is running on at runtime to use the correct uart address. These areas have compile errors intentionally inserted to indicate to the builder they're doing something wrong. A new config variable, CONFIG_ARCH_DAVINCI_DMx, is added to distinguish between a true davinci architecture and the da830 architecture. Note that the da830 currently has an issue with writeback data cache so CONFIG_CPU_DCACHE_WRITETHROUGH should be enabled when building a da830 kernel. Additional generalizations for future SoCs in the da8xx family done by Sudhakar Rajashekhara and Sekhar Nori. Signed-off-by: Steve Chen <schen@mvista.com> Signed-off-by: Mikhail Cherkashin <mcherkashin@ru.mvista.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-06-04 05:36:54 +04:00
#define DA8XX_LPSC1_SCR_P0_SS 24
#define DA8XX_LPSC1_SCR_P1_SS 25
#define DA8XX_LPSC1_CR_P3_SS 26
#define DA8XX_LPSC1_L3_CBA_RAM 31
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
#define PTSTAT 0x128
#define PDSTAT 0x200
#define PDCTL 0x300
#define MDSTAT 0x800
#define MDCTL 0xA00
/* PSC module states */
#define PSC_STATE_SWRSTDISABLE 0
#define PSC_STATE_SYNCRST 1
#define PSC_STATE_DISABLE 2
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x3f
#define PDSTAT_STATE_MASK 0x1f
#define MDCTL_LRST BIT(8)
#define MDCTL_FORCE BIT(31)
#define PDCTL_NEXT BIT(0)
#define PDCTL_EPCGOOD BIT(8)
#ifndef __ASSEMBLER__
extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
extern void davinci_psc_reset(unsigned int ctlr, unsigned int id,
bool reset);
extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
unsigned int id, bool enable, u32 flags);
#endif
#endif /* __ASM_ARCH_PSC_H */