WSL2-Linux-Kernel/include/media/rc-map.h

293 строки
13 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* rc-map.h - define RC map names used by RC drivers
*
* Copyright (c) 2010 by Mauro Carvalho Chehab
*/
#include <linux/input.h>
#include <uapi/linux/lirc.h>
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 02:11:54 +04:00
#define RC_PROTO_BIT_NONE 0ULL
#define RC_PROTO_BIT_UNKNOWN BIT_ULL(RC_PROTO_UNKNOWN)
#define RC_PROTO_BIT_OTHER BIT_ULL(RC_PROTO_OTHER)
#define RC_PROTO_BIT_RC5 BIT_ULL(RC_PROTO_RC5)
#define RC_PROTO_BIT_RC5X_20 BIT_ULL(RC_PROTO_RC5X_20)
#define RC_PROTO_BIT_RC5_SZ BIT_ULL(RC_PROTO_RC5_SZ)
#define RC_PROTO_BIT_JVC BIT_ULL(RC_PROTO_JVC)
#define RC_PROTO_BIT_SONY12 BIT_ULL(RC_PROTO_SONY12)
#define RC_PROTO_BIT_SONY15 BIT_ULL(RC_PROTO_SONY15)
#define RC_PROTO_BIT_SONY20 BIT_ULL(RC_PROTO_SONY20)
#define RC_PROTO_BIT_NEC BIT_ULL(RC_PROTO_NEC)
#define RC_PROTO_BIT_NECX BIT_ULL(RC_PROTO_NECX)
#define RC_PROTO_BIT_NEC32 BIT_ULL(RC_PROTO_NEC32)
#define RC_PROTO_BIT_SANYO BIT_ULL(RC_PROTO_SANYO)
#define RC_PROTO_BIT_MCIR2_KBD BIT_ULL(RC_PROTO_MCIR2_KBD)
#define RC_PROTO_BIT_MCIR2_MSE BIT_ULL(RC_PROTO_MCIR2_MSE)
#define RC_PROTO_BIT_RC6_0 BIT_ULL(RC_PROTO_RC6_0)
#define RC_PROTO_BIT_RC6_6A_20 BIT_ULL(RC_PROTO_RC6_6A_20)
#define RC_PROTO_BIT_RC6_6A_24 BIT_ULL(RC_PROTO_RC6_6A_24)
#define RC_PROTO_BIT_RC6_6A_32 BIT_ULL(RC_PROTO_RC6_6A_32)
#define RC_PROTO_BIT_RC6_MCE BIT_ULL(RC_PROTO_RC6_MCE)
#define RC_PROTO_BIT_SHARP BIT_ULL(RC_PROTO_SHARP)
#define RC_PROTO_BIT_XMP BIT_ULL(RC_PROTO_XMP)
#define RC_PROTO_BIT_CEC BIT_ULL(RC_PROTO_CEC)
#define RC_PROTO_BIT_IMON BIT_ULL(RC_PROTO_IMON)
#define RC_PROTO_BIT_RCMM12 BIT_ULL(RC_PROTO_RCMM12)
#define RC_PROTO_BIT_RCMM24 BIT_ULL(RC_PROTO_RCMM24)
#define RC_PROTO_BIT_RCMM32 BIT_ULL(RC_PROTO_RCMM32)
media: rc: xbox_remote: add protocol and set timeout The timestamps in ir-keytable -t output showed that the Xbox DVD IR dongle decodes scancodes every 64ms. The last scancode of a longer button press is decodes 64ms after the last-but-one which indicates the decoder doesn't use a timeout but decodes on the last edge of the signal. 267.042629: lirc protocol(unknown): scancode = 0xace 267.042665: event type EV_MSC(0x04): scancode = 0xace 267.042665: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.042665: event type EV_SYN(0x00). 267.106625: lirc protocol(unknown): scancode = 0xace 267.106643: event type EV_MSC(0x04): scancode = 0xace 267.106643: event type EV_SYN(0x00). 267.170623: lirc protocol(unknown): scancode = 0xace 267.170638: event type EV_MSC(0x04): scancode = 0xace 267.170638: event type EV_SYN(0x00). 267.234621: lirc protocol(unknown): scancode = 0xace 267.234636: event type EV_MSC(0x04): scancode = 0xace 267.234636: event type EV_SYN(0x00). 267.298623: lirc protocol(unknown): scancode = 0xace 267.298638: event type EV_MSC(0x04): scancode = 0xace 267.298638: event type EV_SYN(0x00). 267.543345: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.543345: event type EV_SYN(0x00). 267.570015: event type EV_KEY(0x01) key_up: KEY_1(0x0002) 267.570015: event type EV_SYN(0x00). Add a protocol with the repeat value and set the timeout in the driver to 10ms (to have a bit of headroom for delays) so the Xbox DVD remote performs more responsive. Signed-off-by: Matthias Reichl <hias@horus.com> Acked-by: Benjamin Valentin <benpicco@googlemail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-24 12:43:51 +03:00
#define RC_PROTO_BIT_XBOX_DVD BIT_ULL(RC_PROTO_XBOX_DVD)
[media] rc-core: add separate defines for protocol bitmaps and numbers The RC_TYPE_* defines are currently used both where a single protocol is expected and where a bitmap of protocols is expected. Functions like rc_keydown() and functions which add/remove entries to the keytable want a single protocol. Future userspace APIs would also benefit from numeric protocols (rather than bitmap ones). Keytables are smaller if they can use a small(ish) integer rather than a bitmap. Other functions or struct members (e.g. allowed_protos, enabled_protocols, etc) accept multiple protocols and need a bitmap. Using different types reduces the risk of programmer error. Using a protocol enum whereever possible also makes for a more future-proof user-space API as we don't need to worry about a sufficient number of bits being available (e.g. in structs used for ioctl() calls). The use of both a number and a corresponding bit is dalso one in e.g. the input subsystem as well (see all the references to set/clear bit when changing keytables for example). This patch separate the different usages in preparation for upcoming patches. Where a single protocol is expected, enum rc_type is used; where one or more protocol(s) are expected, something like u64 is used. The patch has been rewritten so that the format of the sysfs "protocols" file is no longer altered (at the loss of some detail). The file itself should probably be deprecated in the future though. Signed-off-by: David Härdeman <david@hardeman.nu> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-12 02:11:54 +04:00
#define RC_PROTO_BIT_ALL \
(RC_PROTO_BIT_UNKNOWN | RC_PROTO_BIT_OTHER | \
RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
RC_PROTO_BIT_RC5_SZ | RC_PROTO_BIT_JVC | \
RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | \
RC_PROTO_BIT_SONY20 | RC_PROTO_BIT_NEC | \
RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | \
RC_PROTO_BIT_SANYO | \
RC_PROTO_BIT_MCIR2_KBD | RC_PROTO_BIT_MCIR2_MSE | \
RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
RC_PROTO_BIT_RC6_6A_24 | RC_PROTO_BIT_RC6_6A_32 | \
RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_SHARP | \
RC_PROTO_BIT_XMP | RC_PROTO_BIT_CEC | \
RC_PROTO_BIT_IMON | RC_PROTO_BIT_RCMM12 | \
media: rc: xbox_remote: add protocol and set timeout The timestamps in ir-keytable -t output showed that the Xbox DVD IR dongle decodes scancodes every 64ms. The last scancode of a longer button press is decodes 64ms after the last-but-one which indicates the decoder doesn't use a timeout but decodes on the last edge of the signal. 267.042629: lirc protocol(unknown): scancode = 0xace 267.042665: event type EV_MSC(0x04): scancode = 0xace 267.042665: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.042665: event type EV_SYN(0x00). 267.106625: lirc protocol(unknown): scancode = 0xace 267.106643: event type EV_MSC(0x04): scancode = 0xace 267.106643: event type EV_SYN(0x00). 267.170623: lirc protocol(unknown): scancode = 0xace 267.170638: event type EV_MSC(0x04): scancode = 0xace 267.170638: event type EV_SYN(0x00). 267.234621: lirc protocol(unknown): scancode = 0xace 267.234636: event type EV_MSC(0x04): scancode = 0xace 267.234636: event type EV_SYN(0x00). 267.298623: lirc protocol(unknown): scancode = 0xace 267.298638: event type EV_MSC(0x04): scancode = 0xace 267.298638: event type EV_SYN(0x00). 267.543345: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.543345: event type EV_SYN(0x00). 267.570015: event type EV_KEY(0x01) key_up: KEY_1(0x0002) 267.570015: event type EV_SYN(0x00). Add a protocol with the repeat value and set the timeout in the driver to 10ms (to have a bit of headroom for delays) so the Xbox DVD remote performs more responsive. Signed-off-by: Matthias Reichl <hias@horus.com> Acked-by: Benjamin Valentin <benpicco@googlemail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-24 12:43:51 +03:00
RC_PROTO_BIT_RCMM24 | RC_PROTO_BIT_RCMM32 | \
RC_PROTO_BIT_XBOX_DVD)
/* All rc protocols for which we have decoders */
#define RC_PROTO_BIT_ALL_IR_DECODER \
(RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
RC_PROTO_BIT_RC5_SZ | RC_PROTO_BIT_JVC | \
RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | \
RC_PROTO_BIT_SONY20 | RC_PROTO_BIT_NEC | \
RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | \
RC_PROTO_BIT_SANYO | RC_PROTO_BIT_MCIR2_KBD | \
RC_PROTO_BIT_MCIR2_MSE | \
RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
RC_PROTO_BIT_RC6_6A_24 | RC_PROTO_BIT_RC6_6A_32 | \
RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_SHARP | \
RC_PROTO_BIT_XMP | RC_PROTO_BIT_IMON | \
RC_PROTO_BIT_RCMM12 | RC_PROTO_BIT_RCMM24 | \
RC_PROTO_BIT_RCMM32)
#define RC_PROTO_BIT_ALL_IR_ENCODER \
(RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | \
RC_PROTO_BIT_RC5_SZ | RC_PROTO_BIT_JVC | \
RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | \
RC_PROTO_BIT_SONY20 | RC_PROTO_BIT_NEC | \
RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32 | \
RC_PROTO_BIT_SANYO | RC_PROTO_BIT_MCIR2_KBD | \
RC_PROTO_BIT_MCIR2_MSE | \
RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \
RC_PROTO_BIT_RC6_6A_24 | \
RC_PROTO_BIT_RC6_6A_32 | RC_PROTO_BIT_RC6_MCE | \
RC_PROTO_BIT_SHARP | RC_PROTO_BIT_IMON | \
RC_PROTO_BIT_RCMM12 | RC_PROTO_BIT_RCMM24 | \
RC_PROTO_BIT_RCMM32)
#define RC_SCANCODE_UNKNOWN(x) (x)
#define RC_SCANCODE_OTHER(x) (x)
#define RC_SCANCODE_NEC(addr, cmd) (((addr) << 8) | (cmd))
#define RC_SCANCODE_NECX(addr, cmd) (((addr) << 8) | (cmd))
#define RC_SCANCODE_NEC32(data) ((data) & 0xffffffff)
#define RC_SCANCODE_RC5(sys, cmd) (((sys) << 8) | (cmd))
#define RC_SCANCODE_RC5_SZ(sys, cmd) (((sys) << 8) | (cmd))
#define RC_SCANCODE_RC6_0(sys, cmd) (((sys) << 8) | (cmd))
#define RC_SCANCODE_RC6_6A(vendor, sys, cmd) (((vendor) << 16) | ((sys) << 8) | (cmd))
/**
* struct rc_map_table - represents a scancode/keycode pair
*
* @scancode: scan code (u32)
* @keycode: Linux input keycode
*/
struct rc_map_table {
u32 scancode;
u32 keycode;
};
/**
* struct rc_map - represents a keycode map table
*
* @scan: pointer to struct &rc_map_table
* @size: Max number of entries
* @len: Number of entries that are in use
* @alloc: size of \*scan, in bytes
* @rc_proto: type of the remote controller protocol, as defined at
* enum &rc_proto
* @name: name of the key map table
* @lock: lock to protect access to this structure
*/
struct rc_map {
struct rc_map_table *scan;
unsigned int size;
unsigned int len;
unsigned int alloc;
enum rc_proto rc_proto;
const char *name;
spinlock_t lock;
};
/**
* struct rc_map_list - list of the registered &rc_map maps
*
* @list: pointer to struct &list_head
* @map: pointer to struct &rc_map
*/
struct rc_map_list {
struct list_head list;
struct rc_map map;
};
/* Routines from rc-map.c */
/**
* rc_map_register() - Registers a Remote Controller scancode map
*
* @map: pointer to struct rc_map_list
*/
int rc_map_register(struct rc_map_list *map);
/**
* rc_map_unregister() - Unregisters a Remote Controller scancode map
*
* @map: pointer to struct rc_map_list
*/
void rc_map_unregister(struct rc_map_list *map);
/**
* rc_map_get - gets an RC map from its name
* @name: name of the RC scancode map
*/
struct rc_map *rc_map_get(const char *name);
/* Names of the several keytables defined in-kernel */
#define RC_MAP_ADSTECH_DVB_T_PCI "rc-adstech-dvb-t-pci"
#define RC_MAP_ALINK_DTU_M "rc-alink-dtu-m"
#define RC_MAP_ANYSEE "rc-anysee"
#define RC_MAP_APAC_VIEWCOMP "rc-apac-viewcomp"
#define RC_MAP_ASTROMETA_T2HYBRID "rc-astrometa-t2hybrid"
#define RC_MAP_ASUS_PC39 "rc-asus-pc39"
#define RC_MAP_ASUS_PS3_100 "rc-asus-ps3-100"
#define RC_MAP_ATI_TV_WONDER_HD_600 "rc-ati-tv-wonder-hd-600"
#define RC_MAP_ATI_X10 "rc-ati-x10"
#define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d"
#define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus"
#define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt"
#define RC_MAP_AVERMEDIA_M135A "rc-avermedia-m135a"
#define RC_MAP_AVERMEDIA_M733A_RM_K6 "rc-avermedia-m733a-rm-k6"
#define RC_MAP_AVERMEDIA_RM_KS "rc-avermedia-rm-ks"
#define RC_MAP_AVERMEDIA "rc-avermedia"
#define RC_MAP_AVERTV_303 "rc-avertv-303"
#define RC_MAP_AZUREWAVE_AD_TU700 "rc-azurewave-ad-tu700"
#define RC_MAP_BEHOLD_COLUMBUS "rc-behold-columbus"
#define RC_MAP_BEHOLD "rc-behold"
#define RC_MAP_BUDGET_CI_OLD "rc-budget-ci-old"
#define RC_MAP_CEC "rc-cec"
#define RC_MAP_CINERGY_1400 "rc-cinergy-1400"
#define RC_MAP_CINERGY "rc-cinergy"
#define RC_MAP_D680_DMB "rc-d680-dmb"
#define RC_MAP_DELOCK_61959 "rc-delock-61959"
#define RC_MAP_DIB0700_NEC_TABLE "rc-dib0700-nec"
#define RC_MAP_DIB0700_RC5_TABLE "rc-dib0700-rc5"
#define RC_MAP_DIGITALNOW_TINYTWIN "rc-digitalnow-tinytwin"
#define RC_MAP_DIGITTRADE "rc-digittrade"
#define RC_MAP_DM1105_NEC "rc-dm1105-nec"
#define RC_MAP_DNTV_LIVE_DVBT_PRO "rc-dntv-live-dvbt-pro"
#define RC_MAP_DNTV_LIVE_DVB_T "rc-dntv-live-dvb-t"
#define RC_MAP_DTT200U "rc-dtt200u"
#define RC_MAP_DVBSKY "rc-dvbsky"
#define RC_MAP_DVICO_MCE "rc-dvico-mce"
#define RC_MAP_DVICO_PORTABLE "rc-dvico-portable"
#define RC_MAP_EMPTY "rc-empty"
#define RC_MAP_EM_TERRATEC "rc-em-terratec"
#define RC_MAP_ENCORE_ENLTV2 "rc-encore-enltv2"
#define RC_MAP_ENCORE_ENLTV_FM53 "rc-encore-enltv-fm53"
#define RC_MAP_ENCORE_ENLTV "rc-encore-enltv"
#define RC_MAP_EVGA_INDTUBE "rc-evga-indtube"
#define RC_MAP_EZTV "rc-eztv"
#define RC_MAP_FLYDVB "rc-flydvb"
#define RC_MAP_FLYVIDEO "rc-flyvideo"
#define RC_MAP_FUSIONHDTV_MCE "rc-fusionhdtv-mce"
#define RC_MAP_GADMEI_RM008Z "rc-gadmei-rm008z"
#define RC_MAP_GEEKBOX "rc-geekbox"
#define RC_MAP_GENIUS_TVGO_A11MCE "rc-genius-tvgo-a11mce"
#define RC_MAP_GOTVIEW7135 "rc-gotview7135"
#define RC_MAP_HAUPPAUGE_NEW "rc-hauppauge"
#define RC_MAP_HISI_POPLAR "rc-hisi-poplar"
#define RC_MAP_HISI_TV_DEMO "rc-hisi-tv-demo"
#define RC_MAP_IMON_MCE "rc-imon-mce"
#define RC_MAP_IMON_PAD "rc-imon-pad"
#define RC_MAP_IMON_RSC "rc-imon-rsc"
#define RC_MAP_IODATA_BCTV7E "rc-iodata-bctv7e"
#define RC_MAP_IT913X_V1 "rc-it913x-v1"
#define RC_MAP_IT913X_V2 "rc-it913x-v2"
#define RC_MAP_KAIOMY "rc-kaiomy"
#define RC_MAP_KWORLD_315U "rc-kworld-315u"
#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u"
#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"
#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051"
#define RC_MAP_LME2510 "rc-lme2510"
#define RC_MAP_MANLI "rc-manli"
#define RC_MAP_MEDION_X10 "rc-medion-x10"
[media] ati_remote: add support for Medion X10 Digitainer remote Add support for another Medion X10 remote. This was apparently originally used with the Medion Digitainer box, but is now sold separately without any Digitainer labeling. A peculiarity of this remote is a scrollwheel in place of up/down buttons. Each direction is mapped to 8 different scancodes, each corresponding to 1..8 notches, allowing multiple notches to the same direction to be transmitted in a single scancode. The driver transforms the multi-notch scancodes to multiple events of the single-notch scancode. (0x70..0x77 = 1..8 notches down, 0x78..0x7f = 1..8 notches up) Since the scrollwheel scancodes are the same that are used for mouse on some other X10 (ati_remote) remotes, the driver will now check whether the active keymap has a keycode defined for the single-notch scancode when a mouse/scrollwheel scancode (0x70..0x7f) is received. If set, scrollwheel is assumed, otherwise mouse is assumed. This remote ships with a different receiver than the already supported Medion X10 remote, but they share the same USB ID. The only difference in the USB descriptors is that the Digitainer receiver has the Remote Wakeup bit set in bmAttributes of the Configuration Descriptor. Therefore that is used to select the default keymap. Thanks to Stephan Raue from OpenELEC (www.openelec.tv) for providing me both a Medion X10 Digitainer remote+receiver and an already supported Medion X10 remote+receiver. Thanks to Martin Beyss for providing some useful information about the remote (including the "Digitainer" name). This patch has been tested by both of them and myself. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Stephan Raue <stephan@openelec.tv> Tested-by: Martin Beyss <Martin.Beyss@rwth-aachen.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-01 23:41:46 +04:00
#define RC_MAP_MEDION_X10_DIGITAINER "rc-medion-x10-digitainer"
#define RC_MAP_MEDION_X10_OR2X "rc-medion-x10-or2x"
#define RC_MAP_MSI_DIGIVOX_II "rc-msi-digivox-ii"
#define RC_MAP_MSI_DIGIVOX_III "rc-msi-digivox-iii"
#define RC_MAP_MSI_TVANYWHERE_PLUS "rc-msi-tvanywhere-plus"
#define RC_MAP_MSI_TVANYWHERE "rc-msi-tvanywhere"
#define RC_MAP_NEBULA "rc-nebula"
#define RC_MAP_NEC_TERRATEC_CINERGY_XS "rc-nec-terratec-cinergy-xs"
#define RC_MAP_NORWOOD "rc-norwood"
#define RC_MAP_NPGTECH "rc-npgtech"
#define RC_MAP_PCTV_SEDNA "rc-pctv-sedna"
#define RC_MAP_PINNACLE_COLOR "rc-pinnacle-color"
#define RC_MAP_PINNACLE_GREY "rc-pinnacle-grey"
#define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd"
#define RC_MAP_PIXELVIEW_NEW "rc-pixelview-new"
#define RC_MAP_PIXELVIEW "rc-pixelview"
#define RC_MAP_PIXELVIEW_002T "rc-pixelview-002t"
#define RC_MAP_PIXELVIEW_MK12 "rc-pixelview-mk12"
#define RC_MAP_POWERCOLOR_REAL_ANGEL "rc-powercolor-real-angel"
#define RC_MAP_PROTEUS_2309 "rc-proteus-2309"
#define RC_MAP_PURPLETV "rc-purpletv"
#define RC_MAP_PV951 "rc-pv951"
#define RC_MAP_HAUPPAUGE "rc-hauppauge"
#define RC_MAP_RC5_TV "rc-rc5-tv"
#define RC_MAP_RC6_MCE "rc-rc6-mce"
#define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys"
#define RC_MAP_REDDO "rc-reddo"
#define RC_MAP_SNAPSTREAM_FIREFLY "rc-snapstream-firefly"
V4L/DVB: IR/streamzap: functional in-kernel decoding This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-07 20:31:40 +04:00
#define RC_MAP_STREAMZAP "rc-streamzap"
#define RC_MAP_TANGO "rc-tango"
#define RC_MAP_TBS_NEC "rc-tbs-nec"
#define RC_MAP_TECHNISAT_TS35 "rc-technisat-ts35"
#define RC_MAP_TECHNISAT_USB2 "rc-technisat-usb2"
#define RC_MAP_TERRATEC_CINERGY_C_PCI "rc-terratec-cinergy-c-pci"
#define RC_MAP_TERRATEC_CINERGY_S2_HD "rc-terratec-cinergy-s2-hd"
#define RC_MAP_TERRATEC_CINERGY_XS "rc-terratec-cinergy-xs"
#define RC_MAP_TERRATEC_SLIM "rc-terratec-slim"
#define RC_MAP_TERRATEC_SLIM_2 "rc-terratec-slim-2"
#define RC_MAP_TEVII_NEC "rc-tevii-nec"
#define RC_MAP_TIVO "rc-tivo"
#define RC_MAP_TOTAL_MEDIA_IN_HAND "rc-total-media-in-hand"
#define RC_MAP_TOTAL_MEDIA_IN_HAND_02 "rc-total-media-in-hand-02"
#define RC_MAP_TREKSTOR "rc-trekstor"
#define RC_MAP_TT_1500 "rc-tt-1500"
#define RC_MAP_TWINHAN_DTV_CAB_CI "rc-twinhan-dtv-cab-ci"
#define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027"
#define RC_MAP_VIDEOMATE_K100 "rc-videomate-k100"
#define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350"
#define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr"
#define RC_MAP_WINFAST "rc-winfast"
#define RC_MAP_WINFAST_USBII_DELUXE "rc-winfast-usbii-deluxe"
#define RC_MAP_SU3000 "rc-su3000"
#define RC_MAP_XBOX_DVD "rc-xbox-dvd"
#define RC_MAP_ZX_IRDEC "rc-zx-irdec"
/*
* Please, do not just append newer Remote Controller names at the end.
* The names should be ordered in alphabetical order
*/