microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/sound/firewire/digi00x/digi00x.h

158 строки
4.7 KiB
C
Исходник Обычный вид История

ALSA: firewire-digi00x: add skeleton for Digi 002/003 family This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits. Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing [minor cleanup using skip_spaces() by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:16 +03:00
/*
* digi00x.h - a part of driver for Digidesign Digi 002/003 family
*
* Copyright (c) 2014-2015 Takashi Sakamoto
*
* Licensed under the terms of the GNU General Public License, version 2.
*/
#ifndef SOUND_DIGI00X_H_INCLUDED
#define SOUND_DIGI00X_H_INCLUDED
#include <linux/compat.h>
#include <linux/device.h>
#include <linux/firewire.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
ALSA: firewire-digi00x: add proc node to show clock status This commit adds proc node to show current clock status for debugging. As long as testing Digi 002 rack, registers can show local clock rate, local clock source. When external clock input such as S/PDIF is connected, the registers show the detection and external clock rate. Additionally, the registers show the mode of optical digital input interface. Although, a tester with Digi 003 rack reports this makes no sense. Further investigation is required for Digi 003 series. Besides, in Digi 002 rack, the S/PDIF format must be IEC 60958-4, so-called professional. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:19 +03:00
#include <sound/info.h>
ALSA: firewire-digi00x: add data block processing layer Digi 002/003 family uses its own format for data blocks. The format is quite similar to AM824 in IEC 61883-6, while there're some differences: * The Valid Bit Length (VBL) code is always 0x40 in Multi-bit Linear Audio (MBLA) data channel. * The first data channel includes MIDI messages, against IEC 61883-6 recommendation. * The Counter field is always zero in MIDI conformant data channel. * Sequence multiplexing in IEC 61883-6 is not applied to the MIDI conformant data channel. * PCM samples are scrambled in received AMDTP packets. We call the way as Double-Oh-Three (DOT). The algorithm was discovered by Robin Gareus and Damien Zammit in 2012. This commit adds data processing layer to satisfy these differences. There's a quirk about transmission mode for received packets. When this driver applies non-blocking mode to outgoing packets with isochronous channel 2 or more, after 15 to 20 seconds since playbacking, any PCM samples causes noisy sound on the device. With isochronous channel 0 or 1, this doesn't occur. As long as I investigated, this quirk is not observed when applying blocking mode to the received packets. This driver applies blocking mode to outgoing packets, while non-blocking mode to incoming packgets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:17 +03:00
#include <sound/pcm.h>
#include <sound/pcm_params.h>
ALSA: firewire-digi00x: add hwdep interface This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:21 +03:00
#include <sound/firewire.h>
#include <sound/hwdep.h>
ALSA: firewire-digi00x: handle MIDI messages in isochronous packets In Digi 002/003 protocol, MIDI messages are transferred in the last data channel of data blocks. Although this data channel has a label of 0x80, it's not fully MIDI conformant data channel especially because the Counter field always zero independently of included MIDI bytes. The 4th byte of the data channel in LSB tells the number of included MIDI bytes. This byte also includes the number of MIDI port. Therefore, the data format in this data channel is: * 1st: 0x80 as label * 2nd: MIDI bytes * 3rd: 0 or MIDI bytes * 4th: the number of MIDI byte and the number of MIDI port This commit adds support of MIDI messages in data block processing layer. Like AM824 data format, this data channel has a capability to transfer more MIDI messages than the capability of phisical MIDI bus. Therefore, a throttle for data rate is required to prevent devices' internal buffer to overflow. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:15 +03:00
#include <sound/rawmidi.h>
ALSA: firewire-digi00x: add skeleton for Digi 002/003 family This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits. Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing [minor cleanup using skip_spaces() by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:16 +03:00
#include "../lib.h"
ALSA: firewire-digi00x: add data block processing layer Digi 002/003 family uses its own format for data blocks. The format is quite similar to AM824 in IEC 61883-6, while there're some differences: * The Valid Bit Length (VBL) code is always 0x40 in Multi-bit Linear Audio (MBLA) data channel. * The first data channel includes MIDI messages, against IEC 61883-6 recommendation. * The Counter field is always zero in MIDI conformant data channel. * Sequence multiplexing in IEC 61883-6 is not applied to the MIDI conformant data channel. * PCM samples are scrambled in received AMDTP packets. We call the way as Double-Oh-Three (DOT). The algorithm was discovered by Robin Gareus and Damien Zammit in 2012. This commit adds data processing layer to satisfy these differences. There's a quirk about transmission mode for received packets. When this driver applies non-blocking mode to outgoing packets with isochronous channel 2 or more, after 15 to 20 seconds since playbacking, any PCM samples causes noisy sound on the device. With isochronous channel 0 or 1, this doesn't occur. As long as I investigated, this quirk is not observed when applying blocking mode to the received packets. This driver applies blocking mode to outgoing packets, while non-blocking mode to incoming packgets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:17 +03:00
#include "../iso-resources.h"
#include "../amdtp-stream.h"
ALSA: firewire-digi00x: add skeleton for Digi 002/003 family This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits. Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing [minor cleanup using skip_spaces() by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:16 +03:00
struct snd_dg00x {
struct snd_card *card;
struct fw_unit *unit;
struct mutex mutex;
ALSA: firewire-digi00x: add hwdep interface This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:21 +03:00
spinlock_t lock;
ALSA: firewire-digi00x: add stream functionality This commit adds a functionality to manage streaming. The streaming is not controlled by CMP in IEC 61883-6. It's controlled by IEEE 1394 write transaction to certain addresses. Several clock sources are available, while there're no differences about packet transmission. The value of SYT field in transmitted packets is always zero. Thus, streams in both direction don't build synchronization. And the device always requires received packets to transmit packets. This driver keeps to transfer outgoing stream even if they're not required. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:18 +03:00
struct amdtp_stream tx_stream;
struct fw_iso_resources tx_resources;
struct amdtp_stream rx_stream;
struct fw_iso_resources rx_resources;
unsigned int substreams_counter;
ALSA: firewire-digi00x: add hwdep interface This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:21 +03:00
/* for uapi */
int dev_lock_count;
bool dev_lock_changed;
wait_queue_head_t hwdep_wait;
ALSA: firewire-digi00x: add support for asynchronous messaging Digi 002/003 family uses asynchronous transaction for messaging. The address to transmit this message is stored on a certain register. This commit allocates a range of address on OHCI 1394 host controller to handle the messaging. As long as I know, the purpose of this message seems to notify lost of synchronization. While, the meaning of content of the message is not clear. Actual examples of this messaging: * When clock source is set as internal: - 0x00007051 - 0x00007052 - 0x00007054 - 0x00007057 - 0x00007058 * When clock source is set as somewhat external: - 0x00009000 - 0x00009010 - 0x00009020 - 0x00009021 - 0x00009022 The lost often occurs when using internal clock source. In this case, users hear sounds with quite short gap every several minutes. In fact, the lost is recovered temporarily. When using with external clock source, the lost seems not to occur. The mechanism is not clear yet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:22 +03:00
/* For asynchronous messages. */
struct fw_address_handler async_handler;
u32 msg;
ALSA: firewire-digi00x: add support of asynchronous transaction for incoming MIDI messages from physical controls Digi 00x series has two types of model; rack and console. The console models have physical controls. The model can transmit control messages. These control messages are transferred by asynchronous transactions to registered address. This commit supports the asynchronous transaction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:17 +03:00
/* For asynchronous MIDI controls. */
struct snd_rawmidi_substream *in_control;
ALSA: firewire-digi00x: add support of asynchronous transaction for outgoing MIDI messages to physical controls In previous commit, asynchronous transaction for incoming MIDI messages from physical controls is supported. The physical controls may be controlled by receiving MIDI messages at a certain address. This commit supports asynchronous transaction for this purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:18 +03:00
struct snd_fw_async_midi_port out_control;
ALSA: firewire-digi00x: add stream functionality This commit adds a functionality to manage streaming. The streaming is not controlled by CMP in IEC 61883-6. It's controlled by IEEE 1394 write transaction to certain addresses. Several clock sources are available, while there're no differences about packet transmission. The value of SYT field in transmitted packets is always zero. Thus, streams in both direction don't build synchronization. And the device always requires received packets to transmit packets. This driver keeps to transfer outgoing stream even if they're not required. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:18 +03:00
};
#define DG00X_ADDR_BASE 0xffffe0000000ull
#define DG00X_OFFSET_STREAMING_STATE 0x0000
#define DG00X_OFFSET_STREAMING_SET 0x0004
#define DG00X_OFFSET_MIDI_CTL_ADDR 0x0008
/* For LSB of the address 0x000c */
/* unknown 0x0010 */
#define DG00X_OFFSET_MESSAGE_ADDR 0x0014
/* For LSB of the address 0x0018 */
/* unknown 0x001c */
/* unknown 0x0020 */
/* not used 0x0024--0x00ff */
#define DG00X_OFFSET_ISOC_CHANNELS 0x0100
/* unknown 0x0104 */
/* unknown 0x0108 */
/* unknown 0x010c */
#define DG00X_OFFSET_LOCAL_RATE 0x0110
#define DG00X_OFFSET_EXTERNAL_RATE 0x0114
#define DG00X_OFFSET_CLOCK_SOURCE 0x0118
#define DG00X_OFFSET_OPT_IFACE_MODE 0x011c
/* unknown 0x0120 */
/* Mixer control on/off 0x0124 */
/* unknown 0x0128 */
#define DG00X_OFFSET_DETECT_EXTERNAL 0x012c
/* unknown 0x0138 */
#define DG00X_OFFSET_MMC 0x0400
enum snd_dg00x_rate {
SND_DG00X_RATE_44100 = 0,
SND_DG00X_RATE_48000,
SND_DG00X_RATE_88200,
SND_DG00X_RATE_96000,
SND_DG00X_RATE_COUNT,
};
enum snd_dg00x_clock {
SND_DG00X_CLOCK_INTERNAL = 0,
SND_DG00X_CLOCK_SPDIF,
SND_DG00X_CLOCK_ADAT,
SND_DG00X_CLOCK_WORD,
SND_DG00X_CLOCK_COUNT,
ALSA: firewire-digi00x: add skeleton for Digi 002/003 family This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits. Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing [minor cleanup using skip_spaces() by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:16 +03:00
};
ALSA: firewire-digi00x: add proc node to show clock status This commit adds proc node to show current clock status for debugging. As long as testing Digi 002 rack, registers can show local clock rate, local clock source. When external clock input such as S/PDIF is connected, the registers show the detection and external clock rate. Additionally, the registers show the mode of optical digital input interface. Although, a tester with Digi 003 rack reports this makes no sense. Further investigation is required for Digi 003 series. Besides, in Digi 002 rack, the S/PDIF format must be IEC 60958-4, so-called professional. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:19 +03:00
enum snd_dg00x_optical_mode {
SND_DG00X_OPT_IFACE_MODE_ADAT = 0,
SND_DG00X_OPT_IFACE_MODE_SPDIF,
SND_DG00X_OPT_IFACE_MODE_COUNT,
};
ALSA: firewire-digi00x: handle MIDI messages in isochronous packets In Digi 002/003 protocol, MIDI messages are transferred in the last data channel of data blocks. Although this data channel has a label of 0x80, it's not fully MIDI conformant data channel especially because the Counter field always zero independently of included MIDI bytes. The 4th byte of the data channel in LSB tells the number of included MIDI bytes. This byte also includes the number of MIDI port. Therefore, the data format in this data channel is: * 1st: 0x80 as label * 2nd: MIDI bytes * 3rd: 0 or MIDI bytes * 4th: the number of MIDI byte and the number of MIDI port This commit adds support of MIDI messages in data block processing layer. Like AM824 data format, this data channel has a capability to transfer more MIDI messages than the capability of phisical MIDI bus. Therefore, a throttle for data rate is required to prevent devices' internal buffer to overflow. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:15 +03:00
#define DOT_MIDI_IN_PORTS 1
#define DOT_MIDI_OUT_PORTS 2
ALSA: firewire-digi00x: add data block processing layer Digi 002/003 family uses its own format for data blocks. The format is quite similar to AM824 in IEC 61883-6, while there're some differences: * The Valid Bit Length (VBL) code is always 0x40 in Multi-bit Linear Audio (MBLA) data channel. * The first data channel includes MIDI messages, against IEC 61883-6 recommendation. * The Counter field is always zero in MIDI conformant data channel. * Sequence multiplexing in IEC 61883-6 is not applied to the MIDI conformant data channel. * PCM samples are scrambled in received AMDTP packets. We call the way as Double-Oh-Three (DOT). The algorithm was discovered by Robin Gareus and Damien Zammit in 2012. This commit adds data processing layer to satisfy these differences. There's a quirk about transmission mode for received packets. When this driver applies non-blocking mode to outgoing packets with isochronous channel 2 or more, after 15 to 20 seconds since playbacking, any PCM samples causes noisy sound on the device. With isochronous channel 0 or 1, this doesn't occur. As long as I investigated, this quirk is not observed when applying blocking mode to the received packets. This driver applies blocking mode to outgoing packets, while non-blocking mode to incoming packgets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:17 +03:00
int amdtp_dot_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir);
int amdtp_dot_set_parameters(struct amdtp_stream *s, unsigned int rate,
ALSA: firewire-digi00x: handle MIDI messages in isochronous packets In Digi 002/003 protocol, MIDI messages are transferred in the last data channel of data blocks. Although this data channel has a label of 0x80, it's not fully MIDI conformant data channel especially because the Counter field always zero independently of included MIDI bytes. The 4th byte of the data channel in LSB tells the number of included MIDI bytes. This byte also includes the number of MIDI port. Therefore, the data format in this data channel is: * 1st: 0x80 as label * 2nd: MIDI bytes * 3rd: 0 or MIDI bytes * 4th: the number of MIDI byte and the number of MIDI port This commit adds support of MIDI messages in data block processing layer. Like AM824 data format, this data channel has a capability to transfer more MIDI messages than the capability of phisical MIDI bus. Therefore, a throttle for data rate is required to prevent devices' internal buffer to overflow. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:15 +03:00
unsigned int pcm_channels);
ALSA: firewire-digi00x: add data block processing layer Digi 002/003 family uses its own format for data blocks. The format is quite similar to AM824 in IEC 61883-6, while there're some differences: * The Valid Bit Length (VBL) code is always 0x40 in Multi-bit Linear Audio (MBLA) data channel. * The first data channel includes MIDI messages, against IEC 61883-6 recommendation. * The Counter field is always zero in MIDI conformant data channel. * Sequence multiplexing in IEC 61883-6 is not applied to the MIDI conformant data channel. * PCM samples are scrambled in received AMDTP packets. We call the way as Double-Oh-Three (DOT). The algorithm was discovered by Robin Gareus and Damien Zammit in 2012. This commit adds data processing layer to satisfy these differences. There's a quirk about transmission mode for received packets. When this driver applies non-blocking mode to outgoing packets with isochronous channel 2 or more, after 15 to 20 seconds since playbacking, any PCM samples causes noisy sound on the device. With isochronous channel 0 or 1, this doesn't occur. As long as I investigated, this quirk is not observed when applying blocking mode to the received packets. This driver applies blocking mode to outgoing packets, while non-blocking mode to incoming packgets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:17 +03:00
void amdtp_dot_reset(struct amdtp_stream *s);
int amdtp_dot_add_pcm_hw_constraints(struct amdtp_stream *s,
struct snd_pcm_runtime *runtime);
void amdtp_dot_set_pcm_format(struct amdtp_stream *s, snd_pcm_format_t format);
ALSA: firewire-digi00x: handle MIDI messages in isochronous packets In Digi 002/003 protocol, MIDI messages are transferred in the last data channel of data blocks. Although this data channel has a label of 0x80, it's not fully MIDI conformant data channel especially because the Counter field always zero independently of included MIDI bytes. The 4th byte of the data channel in LSB tells the number of included MIDI bytes. This byte also includes the number of MIDI port. Therefore, the data format in this data channel is: * 1st: 0x80 as label * 2nd: MIDI bytes * 3rd: 0 or MIDI bytes * 4th: the number of MIDI byte and the number of MIDI port This commit adds support of MIDI messages in data block processing layer. Like AM824 data format, this data channel has a capability to transfer more MIDI messages than the capability of phisical MIDI bus. Therefore, a throttle for data rate is required to prevent devices' internal buffer to overflow. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:15 +03:00
void amdtp_dot_midi_trigger(struct amdtp_stream *s, unsigned int port,
struct snd_rawmidi_substream *midi);
ALSA: firewire-digi00x: add data block processing layer Digi 002/003 family uses its own format for data blocks. The format is quite similar to AM824 in IEC 61883-6, while there're some differences: * The Valid Bit Length (VBL) code is always 0x40 in Multi-bit Linear Audio (MBLA) data channel. * The first data channel includes MIDI messages, against IEC 61883-6 recommendation. * The Counter field is always zero in MIDI conformant data channel. * Sequence multiplexing in IEC 61883-6 is not applied to the MIDI conformant data channel. * PCM samples are scrambled in received AMDTP packets. We call the way as Double-Oh-Three (DOT). The algorithm was discovered by Robin Gareus and Damien Zammit in 2012. This commit adds data processing layer to satisfy these differences. There's a quirk about transmission mode for received packets. When this driver applies non-blocking mode to outgoing packets with isochronous channel 2 or more, after 15 to 20 seconds since playbacking, any PCM samples causes noisy sound on the device. With isochronous channel 0 or 1, this doesn't occur. As long as I investigated, this quirk is not observed when applying blocking mode to the received packets. This driver applies blocking mode to outgoing packets, while non-blocking mode to incoming packgets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:17 +03:00
ALSA: firewire-digi00x: add support for asynchronous messaging Digi 002/003 family uses asynchronous transaction for messaging. The address to transmit this message is stored on a certain register. This commit allocates a range of address on OHCI 1394 host controller to handle the messaging. As long as I know, the purpose of this message seems to notify lost of synchronization. While, the meaning of content of the message is not clear. Actual examples of this messaging: * When clock source is set as internal: - 0x00007051 - 0x00007052 - 0x00007054 - 0x00007057 - 0x00007058 * When clock source is set as somewhat external: - 0x00009000 - 0x00009010 - 0x00009020 - 0x00009021 - 0x00009022 The lost often occurs when using internal clock source. In this case, users hear sounds with quite short gap every several minutes. In fact, the lost is recovered temporarily. When using with external clock source, the lost seems not to occur. The mechanism is not clear yet. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:22 +03:00
int snd_dg00x_transaction_register(struct snd_dg00x *dg00x);
int snd_dg00x_transaction_reregister(struct snd_dg00x *dg00x);
void snd_dg00x_transaction_unregister(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add stream functionality This commit adds a functionality to manage streaming. The streaming is not controlled by CMP in IEC 61883-6. It's controlled by IEEE 1394 write transaction to certain addresses. Several clock sources are available, while there're no differences about packet transmission. The value of SYT field in transmitted packets is always zero. Thus, streams in both direction don't build synchronization. And the device always requires received packets to transmit packets. This driver keeps to transfer outgoing stream even if they're not required. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:18 +03:00
extern const unsigned int snd_dg00x_stream_rates[SND_DG00X_RATE_COUNT];
extern const unsigned int snd_dg00x_stream_pcm_channels[SND_DG00X_RATE_COUNT];
int snd_dg00x_stream_get_external_rate(struct snd_dg00x *dg00x,
unsigned int *rate);
int snd_dg00x_stream_get_local_rate(struct snd_dg00x *dg00x,
unsigned int *rate);
int snd_dg00x_stream_set_local_rate(struct snd_dg00x *dg00x, unsigned int rate);
int snd_dg00x_stream_get_clock(struct snd_dg00x *dg00x,
enum snd_dg00x_clock *clock);
int snd_dg00x_stream_check_external_clock(struct snd_dg00x *dg00x,
bool *detect);
int snd_dg00x_stream_init_duplex(struct snd_dg00x *dg00x);
int snd_dg00x_stream_start_duplex(struct snd_dg00x *dg00x, unsigned int rate);
void snd_dg00x_stream_stop_duplex(struct snd_dg00x *dg00x);
void snd_dg00x_stream_update_duplex(struct snd_dg00x *dg00x);
void snd_dg00x_stream_destroy_duplex(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add hwdep interface This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:21 +03:00
void snd_dg00x_stream_lock_changed(struct snd_dg00x *dg00x);
int snd_dg00x_stream_lock_try(struct snd_dg00x *dg00x);
void snd_dg00x_stream_lock_release(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add proc node to show clock status This commit adds proc node to show current clock status for debugging. As long as testing Digi 002 rack, registers can show local clock rate, local clock source. When external clock input such as S/PDIF is connected, the registers show the detection and external clock rate. Additionally, the registers show the mode of optical digital input interface. Although, a tester with Digi 003 rack reports this makes no sense. Further investigation is required for Digi 003 series. Besides, in Digi 002 rack, the S/PDIF format must be IEC 60958-4, so-called professional. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:19 +03:00
void snd_dg00x_proc_init(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add PCM functionality This commit adds PCM functionality to transmit/receive PCM samples. Any PCM substreams are jointed because incoming/outgoing AMDTP streams are bound. When one of PCM substream is running or external clock source is selected, current sampling rate is used. Else, the sampling rate is changed as an userspace application requests. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:20 +03:00
int snd_dg00x_create_pcm_devices(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add support for MIDI ports corresponding to isochronous packet streaming This commit adds MIDI functionality to capture/playback MIDI messages from/to physical MIDI ports. These messages are transferred in isochronous packets. When no substreams request AMDTP streams to run, this driver starts the streams at current sampling rate. When other substreams start at different sampling rate, the streams are stopped temporarily, then start again at requested sampling rate. This operation can generate missing MIDI bytes, thus it's preferable to start PCM substreams at favorite sampling rate in advance. Digi 002/003 console also has a set of MIDI port for physical controls. These ports are added in later commits. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-11 06:30:16 +03:00
int snd_dg00x_create_midi_devices(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add hwdep interface This commit adds hwdep interface so as the other sound drivers for units on IEEE 1394 bus have. This interface is designed for mixer/control applications. By using this interface, an application can get information about firewire node, can lock/unlock kernel streaming and can get notification at starting/stopping kernel streaming. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:21 +03:00
int snd_dg00x_create_hwdep_device(struct snd_dg00x *dg00x);
ALSA: firewire-digi00x: add skeleton for Digi 002/003 family This commit adds a new driver for Digidesign 002/003 family. This commit just creates/removes card instance according to bus event. More functions will be added in following commits. Digidesign 002/003 family consists of: * Agere FW802B for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * ALTERA ACEX EP1K50 for IEC 61883 layer and DSP controller * ADSP-21065L for signal processing [minor cleanup using skip_spaces() by tiwai] Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-09-30 03:39:16 +03:00
#endif