WSL2-Linux-Kernel/drivers/of/of_mdio.c

342 строки
8.6 KiB
C
Исходник Обычный вид История

/*
* OF helpers for the MDIO (Ethernet PHY) API
*
* Copyright (c) 2009 Secret Lab Technologies, Ltd.
*
* This file is released under the GPLv2
*
* This file provides helper functions for extracting PHY device information
* out of the OpenFirmware device tree and using it to populate an mii_bus.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/err.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/module.h>
MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
MODULE_LICENSE("GPL");
/* Extract the clause 22 phy ID from the compatible string of the form
* ethernet-phy-idAAAA.BBBB */
static int of_get_phy_id(struct device_node *device, u32 *phy_id)
{
struct property *prop;
const char *cp;
unsigned int upper, lower;
of_property_for_each_string(device, "compatible", prop, cp) {
if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
*phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
return 0;
}
}
return -EINVAL;
}
static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *child,
u32 addr)
{
struct phy_device *phy;
bool is_c45;
int rc;
u32 phy_id;
is_c45 = of_device_is_compatible(child,
"ethernet-phy-ieee802.3-c45");
if (!is_c45 && !of_get_phy_id(child, &phy_id))
phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
else
phy = get_phy_device(mdio, addr, is_c45);
if (!phy || IS_ERR(phy))
return 1;
rc = irq_of_parse_and_map(child, 0);
if (rc > 0) {
phy->irq = rc;
if (mdio->irq)
mdio->irq[addr] = rc;
} else {
if (mdio->irq)
phy->irq = mdio->irq[addr];
}
if (of_property_read_bool(child, "broken-turn-around"))
mdio->phy_ignore_ta_mask |= 1 << addr;
/* Associate the OF node with the device structure so it
* can be looked up later */
of_node_get(child);
phy->dev.of_node = child;
/* All data is now stored in the phy struct;
* register it */
rc = phy_device_register(phy);
if (rc) {
phy_device_free(phy);
of_node_put(child);
return 1;
}
dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
child->name, addr);
return 0;
}
int of_mdio_parse_addr(struct device *dev, const struct device_node *np)
{
u32 addr;
int ret;
ret = of_property_read_u32(np, "reg", &addr);
if (ret < 0) {
dev_err(dev, "%s has invalid PHY address\n", np->full_name);
return ret;
}
/* A PHY must have a reg property in the range [0-31] */
if (addr >= PHY_MAX_ADDR) {
dev_err(dev, "%s PHY address %i is too large\n",
np->full_name, addr);
return -EINVAL;
}
return addr;
}
EXPORT_SYMBOL(of_mdio_parse_addr);
/**
* of_mdiobus_register - Register mii_bus and create PHYs from the device tree
* @mdio: pointer to mii_bus structure
* @np: pointer to device_node of MDIO bus.
*
* This function registers the mii_bus structure and registers a phy_device
* for each child node of @np.
*/
int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
{
struct device_node *child;
const __be32 *paddr;
bool scanphys = false;
int addr, rc, i;
/* Mask out all PHYs from auto probing. Instead the PHYs listed in
* the device tree are populated after the bus has been registered */
mdio->phy_mask = ~0;
/* Clear all the IRQ properties */
if (mdio->irq)
for (i=0; i<PHY_MAX_ADDR; i++)
mdio->irq[i] = PHY_POLL;
mdio->dev.of_node = np;
/* Register the MDIO bus */
rc = mdiobus_register(mdio);
if (rc)
return rc;
/* Loop over the child nodes and register a phy_device for each one */
for_each_available_child_of_node(np, child) {
addr = of_mdio_parse_addr(&mdio->dev, child);
if (addr < 0) {
scanphys = true;
continue;
}
rc = of_mdiobus_register_phy(mdio, child, addr);
if (rc)
continue;
}
if (!scanphys)
return 0;
/* auto scan for PHYs with empty reg property */
for_each_available_child_of_node(np, child) {
/* Skip PHYs with reg property set */
paddr = of_get_property(child, "reg", NULL);
if (paddr)
continue;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
/* skip already registered PHYs */
if (mdio->phy_map[addr])
continue;
/* be noisy to encourage people to set reg property */
dev_info(&mdio->dev, "scan phy %s at address %i\n",
child->name, addr);
rc = of_mdiobus_register_phy(mdio, child, addr);
if (rc)
continue;
}
}
return 0;
}
EXPORT_SYMBOL(of_mdiobus_register);
/* Helper function for of_phy_find_device */
static int of_phy_match(struct device *dev, void *phy_np)
{
return dev->of_node == phy_np;
}
/**
* of_phy_find_device - Give a PHY node, find the phy_device
* @phy_np: Pointer to the phy's device tree node
*
* Returns a pointer to the phy_device.
*/
struct phy_device *of_phy_find_device(struct device_node *phy_np)
{
struct device *d;
if (!phy_np)
return NULL;
d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
return d ? to_phy_device(d) : NULL;
}
EXPORT_SYMBOL(of_phy_find_device);
/**
* of_phy_connect - Connect to the phy described in the device tree
* @dev: pointer to net_device claiming the phy
* @phy_np: Pointer to device tree node for the PHY
* @hndlr: Link state callback for the network device
* @iface: PHY data interface type
*
* Returns a pointer to the phy_device if successful. NULL otherwise
*/
struct phy_device *of_phy_connect(struct net_device *dev,
struct device_node *phy_np,
void (*hndlr)(struct net_device *), u32 flags,
phy_interface_t iface)
{
struct phy_device *phy = of_phy_find_device(phy_np);
if (!phy)
return NULL;
phy->dev_flags = flags;
return phy_connect_direct(dev, phy, hndlr, iface) ? NULL : phy;
}
EXPORT_SYMBOL(of_phy_connect);
/**
* of_phy_attach - Attach to a PHY without starting the state machine
* @dev: pointer to net_device claiming the phy
* @phy_np: Node pointer for the PHY
* @flags: flags to pass to the PHY
* @iface: PHY data interface type
*/
struct phy_device *of_phy_attach(struct net_device *dev,
struct device_node *phy_np, u32 flags,
phy_interface_t iface)
{
struct phy_device *phy = of_phy_find_device(phy_np);
if (!phy)
return NULL;
return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy;
}
EXPORT_SYMBOL(of_phy_attach);
#if defined(CONFIG_FIXED_PHY)
/*
* of_phy_is_fixed_link() and of_phy_register_fixed_link() must
* support two DT bindings:
* - the old DT binding, where 'fixed-link' was a property with 5
* cells encoding various informations about the fixed PHY
* - the new DT binding, where 'fixed-link' is a sub-node of the
* Ethernet device.
*/
bool of_phy_is_fixed_link(struct device_node *np)
{
struct device_node *dn;
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 03:49:57 +03:00
int len, err;
const char *managed;
/* New binding */
dn = of_get_child_by_name(np, "fixed-link");
if (dn) {
of_node_put(dn);
return true;
}
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 03:49:57 +03:00
err = of_property_read_string(np, "managed", &managed);
if (err == 0 && strcmp(managed, "auto") != 0)
return true;
/* Old binding */
if (of_get_property(np, "fixed-link", &len) &&
len == (5 * sizeof(__be32)))
return true;
return false;
}
EXPORT_SYMBOL(of_phy_is_fixed_link);
int of_phy_register_fixed_link(struct device_node *np)
{
struct fixed_phy_status status = {};
struct device_node *fixed_link_node;
const __be32 *fixed_link_prop;
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 03:49:57 +03:00
int len, err;
struct phy_device *phy;
of_mdio: add new DT property 'managed' to specify the PHY management type Currently the PHY management type is selected by the MAC driver arbitrary. The decision is based on the presence of the "fixed-link" node and on a will of the driver's authors. This caused a regression recently, when mvneta driver suddenly started to use the in-band status for auto-negotiation on fixed links. It appears the auto-negotiation may not work when expected by the MAC driver. Sebastien Rannou explains: << Yes, I confirm that my HW does not generate an in-band status. AFAIK, it's a PHY that aggregates 4xSGMIIs to 1xQSGMII ; the MAC side of the PHY (with inband status) is connected to the switch through QSGMII, and in this context we are on the media side of the PHY. >> https://lkml.org/lkml/2015/7/10/206 This patch introduces the new string property 'managed' that allows the user to set the management type explicitly. The supported values are: "auto" - default. Uses either MDIO or nothing, depending on the presence of the fixed-link node "in-band-status" - use in-band status Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Grant Likely <grant.likely@linaro.org> CC: devicetree@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21 03:49:57 +03:00
const char *managed;
err = of_property_read_string(np, "managed", &managed);
if (err == 0) {
if (strcmp(managed, "in-band-status") == 0) {
/* status is zeroed, namely its .link member */
phy = fixed_phy_register(PHY_POLL, &status, np);
return IS_ERR(phy) ? PTR_ERR(phy) : 0;
}
}
/* New binding */
fixed_link_node = of_get_child_by_name(np, "fixed-link");
if (fixed_link_node) {
status.link = 1;
status.duplex = of_property_read_bool(fixed_link_node,
"full-duplex");
if (of_property_read_u32(fixed_link_node, "speed", &status.speed))
return -EINVAL;
status.pause = of_property_read_bool(fixed_link_node, "pause");
status.asym_pause = of_property_read_bool(fixed_link_node,
"asym-pause");
of_node_put(fixed_link_node);
phy = fixed_phy_register(PHY_POLL, &status, np);
return IS_ERR(phy) ? PTR_ERR(phy) : 0;
}
/* Old binding */
fixed_link_prop = of_get_property(np, "fixed-link", &len);
if (fixed_link_prop && len == (5 * sizeof(__be32))) {
status.link = 1;
status.duplex = be32_to_cpu(fixed_link_prop[1]);
status.speed = be32_to_cpu(fixed_link_prop[2]);
status.pause = be32_to_cpu(fixed_link_prop[3]);
status.asym_pause = be32_to_cpu(fixed_link_prop[4]);
phy = fixed_phy_register(PHY_POLL, &status, np);
return IS_ERR(phy) ? PTR_ERR(phy) : 0;
}
return -ENODEV;
}
EXPORT_SYMBOL(of_phy_register_fixed_link);
#endif