WSL2-Linux-Kernel/drivers/scsi/scsi_sysfs.c

1143 строки
29 KiB
C
Исходник Обычный вид История

/*
* scsi_sysfs.c
*
* SCSI sysfs interface routines.
*
* Created to pull SCSI mid layer sysfs routines into one file.
*/
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/device.h>
[SCSI] implement runtime Power Management This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-17 18:41:42 +04:00
#include <linux/pm_runtime.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_driver.h>
#include "scsi_priv.h"
#include "scsi_logging.h"
static struct device_type scsi_dev_type;
static const struct {
enum scsi_device_state value;
char *name;
} sdev_states[] = {
{ SDEV_CREATED, "created" },
{ SDEV_RUNNING, "running" },
{ SDEV_CANCEL, "cancel" },
{ SDEV_DEL, "deleted" },
{ SDEV_QUIESCE, "quiesce" },
{ SDEV_OFFLINE, "offline" },
{ SDEV_TRANSPORT_OFFLINE, "transport-offline" },
{ SDEV_BLOCK, "blocked" },
{ SDEV_CREATED_BLOCK, "created-blocked" },
};
const char *scsi_device_state_name(enum scsi_device_state state)
{
int i;
char *name = NULL;
for (i = 0; i < ARRAY_SIZE(sdev_states); i++) {
if (sdev_states[i].value == state) {
name = sdev_states[i].name;
break;
}
}
return name;
}
static const struct {
enum scsi_host_state value;
char *name;
} shost_states[] = {
{ SHOST_CREATED, "created" },
{ SHOST_RUNNING, "running" },
{ SHOST_CANCEL, "cancel" },
{ SHOST_DEL, "deleted" },
{ SHOST_RECOVERY, "recovery" },
{ SHOST_CANCEL_RECOVERY, "cancel/recovery" },
{ SHOST_DEL_RECOVERY, "deleted/recovery", },
};
const char *scsi_host_state_name(enum scsi_host_state state)
{
int i;
char *name = NULL;
for (i = 0; i < ARRAY_SIZE(shost_states); i++) {
if (shost_states[i].value == state) {
name = shost_states[i].name;
break;
}
}
return name;
}
static int check_set(unsigned int *val, char *src)
{
char *last;
if (strncmp(src, "-", 20) == 0) {
*val = SCAN_WILD_CARD;
} else {
/*
* Doesn't check for int overflow
*/
*val = simple_strtoul(src, &last, 0);
if (*last != '\0')
return 1;
}
return 0;
}
static int scsi_scan(struct Scsi_Host *shost, const char *str)
{
char s1[15], s2[15], s3[15], junk;
unsigned int channel, id, lun;
int res;
res = sscanf(str, "%10s %10s %10s %c", s1, s2, s3, &junk);
if (res != 3)
return -EINVAL;
if (check_set(&channel, s1))
return -EINVAL;
if (check_set(&id, s2))
return -EINVAL;
if (check_set(&lun, s3))
return -EINVAL;
if (shost->transportt->user_scan)
res = shost->transportt->user_scan(shost, channel, id, lun);
else
res = scsi_scan_host_selected(shost, channel, id, lun, 1);
return res;
}
/*
* shost_show_function: macro to create an attr function that can be used to
* show a non-bit field.
*/
#define shost_show_function(name, field, format_string) \
static ssize_t \
show_##name (struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct Scsi_Host *shost = class_to_shost(dev); \
return snprintf (buf, 20, format_string, shost->field); \
}
/*
* shost_rd_attr: macro to create a function and attribute variable for a
* read only field.
*/
#define shost_rd_attr2(name, field, format_string) \
shost_show_function(name, field, format_string) \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
#define shost_rd_attr(field, format_string) \
shost_rd_attr2(field, field, format_string)
/*
* Create the actual show/store functions and data structures.
*/
static ssize_t
store_scan(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
int res;
res = scsi_scan(shost, buf);
if (res == 0)
res = count;
return res;
};
static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
static ssize_t
store_shost_state(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int i;
struct Scsi_Host *shost = class_to_shost(dev);
enum scsi_host_state state = 0;
for (i = 0; i < ARRAY_SIZE(shost_states); i++) {
const int len = strlen(shost_states[i].name);
if (strncmp(shost_states[i].name, buf, len) == 0 &&
buf[len] == '\n') {
state = shost_states[i].value;
break;
}
}
if (!state)
return -EINVAL;
if (scsi_host_set_state(shost, state))
return -EINVAL;
return count;
}
static ssize_t
show_shost_state(struct device *dev, struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
const char *name = scsi_host_state_name(shost->shost_state);
if (!name)
return -EINVAL;
return snprintf(buf, 20, "%s\n", name);
}
/* DEVICE_ATTR(state) clashes with dev_attr_state for sdev */
struct device_attribute dev_attr_hstate =
__ATTR(state, S_IRUGO | S_IWUSR, show_shost_state, store_shost_state);
static ssize_t
show_shost_mode(unsigned int mode, char *buf)
{
ssize_t len = 0;
if (mode & MODE_INITIATOR)
len = sprintf(buf, "%s", "Initiator");
if (mode & MODE_TARGET)
len += sprintf(buf + len, "%s%s", len ? ", " : "", "Target");
len += sprintf(buf + len, "\n");
return len;
}
static ssize_t
show_shost_supported_mode(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
unsigned int supported_mode = shost->hostt->supported_mode;
if (supported_mode == MODE_UNKNOWN)
/* by default this should be initiator */
supported_mode = MODE_INITIATOR;
return show_shost_mode(supported_mode, buf);
}
static DEVICE_ATTR(supported_mode, S_IRUGO | S_IWUSR, show_shost_supported_mode, NULL);
static ssize_t
show_shost_active_mode(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
if (shost->active_mode == MODE_UNKNOWN)
return snprintf(buf, 20, "unknown\n");
else
return show_shost_mode(shost->active_mode, buf);
}
static DEVICE_ATTR(active_mode, S_IRUGO | S_IWUSR, show_shost_active_mode, NULL);
static int check_reset_type(char *str)
{
if (strncmp(str, "adapter", 10) == 0)
return SCSI_ADAPTER_RESET;
else if (strncmp(str, "firmware", 10) == 0)
return SCSI_FIRMWARE_RESET;
else
return 0;
}
static ssize_t
store_host_reset(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct scsi_host_template *sht = shost->hostt;
int ret = -EINVAL;
char str[10];
int type;
sscanf(buf, "%s", str);
type = check_reset_type(str);
if (!type)
goto exit_store_host_reset;
if (sht->host_reset)
ret = sht->host_reset(shost, type);
exit_store_host_reset:
if (ret == 0)
ret = count;
return ret;
}
static DEVICE_ATTR(host_reset, S_IWUSR, NULL, store_host_reset);
shost_rd_attr(unique_id, "%u\n");
shost_rd_attr(host_busy, "%hu\n");
shost_rd_attr(cmd_per_lun, "%hd\n");
shost_rd_attr(can_queue, "%hd\n");
shost_rd_attr(sg_tablesize, "%hu\n");
shost_rd_attr(sg_prot_tablesize, "%hu\n");
shost_rd_attr(unchecked_isa_dma, "%d\n");
shost_rd_attr(prot_capabilities, "%u\n");
shost_rd_attr(prot_guard_type, "%hd\n");
shost_rd_attr2(proc_name, hostt->proc_name, "%s\n");
static struct attribute *scsi_sysfs_shost_attrs[] = {
&dev_attr_unique_id.attr,
&dev_attr_host_busy.attr,
&dev_attr_cmd_per_lun.attr,
&dev_attr_can_queue.attr,
&dev_attr_sg_tablesize.attr,
&dev_attr_sg_prot_tablesize.attr,
&dev_attr_unchecked_isa_dma.attr,
&dev_attr_proc_name.attr,
&dev_attr_scan.attr,
&dev_attr_hstate.attr,
&dev_attr_supported_mode.attr,
&dev_attr_active_mode.attr,
&dev_attr_prot_capabilities.attr,
&dev_attr_prot_guard_type.attr,
&dev_attr_host_reset.attr,
NULL
};
struct attribute_group scsi_shost_attr_group = {
.attrs = scsi_sysfs_shost_attrs,
};
const struct attribute_group *scsi_sysfs_shost_attr_groups[] = {
&scsi_shost_attr_group,
NULL
};
static void scsi_device_cls_release(struct device *class_dev)
{
struct scsi_device *sdev;
sdev = class_to_sdev(class_dev);
put_device(&sdev->sdev_gendev);
}
2006-11-22 17:55:48 +03:00
static void scsi_device_dev_release_usercontext(struct work_struct *work)
{
struct scsi_device *sdev;
struct device *parent;
struct scsi_target *starget;
struct list_head *this, *tmp;
unsigned long flags;
2006-11-22 17:55:48 +03:00
sdev = container_of(work, struct scsi_device, ew.work);
parent = sdev->sdev_gendev.parent;
starget = to_scsi_target(parent);
spin_lock_irqsave(sdev->host->host_lock, flags);
starget->reap_ref++;
list_del(&sdev->siblings);
list_del(&sdev->same_target_siblings);
list_del(&sdev->starved_entry);
spin_unlock_irqrestore(sdev->host->host_lock, flags);
cancel_work_sync(&sdev->event_work);
list_for_each_safe(this, tmp, &sdev->event_list) {
struct scsi_event *evt;
evt = list_entry(this, struct scsi_event, node);
list_del(&evt->node);
kfree(evt);
}
blk_put_queue(sdev->request_queue);
/* NULL queue means the device can't be used */
sdev->request_queue = NULL;
scsi_target_reap(scsi_target(sdev));
kfree(sdev->inquiry);
kfree(sdev);
if (parent)
put_device(parent);
}
static void scsi_device_dev_release(struct device *dev)
{
struct scsi_device *sdp = to_scsi_device(dev);
2006-11-22 17:55:48 +03:00
execute_in_process_context(scsi_device_dev_release_usercontext,
&sdp->ew);
}
static struct class sdev_class = {
.name = "scsi_device",
.dev_release = scsi_device_cls_release,
};
/* all probing is done in the individual ->probe routines */
static int scsi_bus_match(struct device *dev, struct device_driver *gendrv)
{
struct scsi_device *sdp;
if (dev->type != &scsi_dev_type)
return 0;
sdp = to_scsi_device(dev);
if (sdp->no_uld_attach)
return 0;
return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0;
}
static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 16:02:37 +04:00
{
struct scsi_device *sdev;
if (dev->type != &scsi_dev_type)
return 0;
sdev = to_scsi_device(dev);
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 16:02:37 +04:00
add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 16:02:37 +04:00
return 0;
}
struct bus_type scsi_bus_type = {
.name = "scsi",
.match = scsi_bus_match,
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 16:02:37 +04:00
.uevent = scsi_bus_uevent,
#ifdef CONFIG_PM
.pm = &scsi_bus_pm_ops,
#endif
};
EXPORT_SYMBOL_GPL(scsi_bus_type);
int scsi_sysfs_register(void)
{
int error;
error = bus_register(&scsi_bus_type);
if (!error) {
error = class_register(&sdev_class);
if (error)
bus_unregister(&scsi_bus_type);
}
return error;
}
void scsi_sysfs_unregister(void)
{
class_unregister(&sdev_class);
bus_unregister(&scsi_bus_type);
}
/*
* sdev_show_function: macro to create an attr function that can be used to
* show a non-bit field.
*/
#define sdev_show_function(field, format_string) \
static ssize_t \
sdev_show_##field (struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct scsi_device *sdev; \
sdev = to_scsi_device(dev); \
return snprintf (buf, 20, format_string, sdev->field); \
} \
/*
* sdev_rd_attr: macro to create a function and attribute variable for a
* read only field.
*/
#define sdev_rd_attr(field, format_string) \
sdev_show_function(field, format_string) \
static DEVICE_ATTR(field, S_IRUGO, sdev_show_##field, NULL);
/*
* sdev_rw_attr: create a function and attribute variable for a
* read/write field.
*/
#define sdev_rw_attr(field, format_string) \
sdev_show_function(field, format_string) \
\
static ssize_t \
sdev_store_##field (struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct scsi_device *sdev; \
sdev = to_scsi_device(dev); \
sscanf (buf, format_string, &sdev->field); \
return count; \
} \
static DEVICE_ATTR(field, S_IRUGO | S_IWUSR, sdev_show_##field, sdev_store_##field);
/* Currently we don't export bit fields, but we might in future,
* so leave this code in */
#if 0
/*
* sdev_rd_attr: create a function and attribute variable for a
* read/write bit field.
*/
#define sdev_rw_attr_bit(field) \
sdev_show_function(field, "%d\n") \
\
static ssize_t \
sdev_store_##field (struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
int ret; \
struct scsi_device *sdev; \
ret = scsi_sdev_check_buf_bit(buf); \
if (ret >= 0) { \
sdev = to_scsi_device(dev); \
sdev->field = ret; \
ret = count; \
} \
return ret; \
} \
static DEVICE_ATTR(field, S_IRUGO | S_IWUSR, sdev_show_##field, sdev_store_##field);
/*
* scsi_sdev_check_buf_bit: return 0 if buf is "0", return 1 if buf is "1",
* else return -EINVAL.
*/
static int scsi_sdev_check_buf_bit(const char *buf)
{
if ((buf[1] == '\0') || ((buf[1] == '\n') && (buf[2] == '\0'))) {
if (buf[0] == '1')
return 1;
else if (buf[0] == '0')
return 0;
else
return -EINVAL;
} else
return -EINVAL;
}
#endif
/*
* Create the actual show/store functions and data structures.
*/
sdev_rd_attr (device_blocked, "%d\n");
sdev_rd_attr (queue_depth, "%d\n");
sdev_rd_attr (type, "%d\n");
sdev_rd_attr (scsi_level, "%d\n");
sdev_rd_attr (vendor, "%.8s\n");
sdev_rd_attr (model, "%.16s\n");
sdev_rd_attr (rev, "%.4s\n");
/*
* TODO: can we make these symlinks to the block layer ones?
*/
static ssize_t
sdev_show_timeout (struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev;
sdev = to_scsi_device(dev);
return snprintf(buf, 20, "%d\n", sdev->request_queue->rq_timeout / HZ);
}
static ssize_t
sdev_store_timeout (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct scsi_device *sdev;
int timeout;
sdev = to_scsi_device(dev);
sscanf (buf, "%d\n", &timeout);
blk_queue_rq_timeout(sdev->request_queue, timeout * HZ);
return count;
}
static DEVICE_ATTR(timeout, S_IRUGO | S_IWUSR, sdev_show_timeout, sdev_store_timeout);
static ssize_t
store_rescan_field (struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
scsi_rescan_device(dev);
return count;
}
static DEVICE_ATTR(rescan, S_IWUSR, NULL, store_rescan_field);
static void sdev_store_delete_callback(struct device *dev)
{
scsi_remove_device(to_scsi_device(dev));
}
static ssize_t
sdev_store_delete(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
/* An attribute cannot be unregistered by one of its own methods,
* so we have to use this roundabout approach.
*/
rc = device_schedule_callback(dev, sdev_store_delete_callback);
if (rc)
count = rc;
return count;
};
static DEVICE_ATTR(delete, S_IWUSR, NULL, sdev_store_delete);
static ssize_t
store_state_field(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int i;
struct scsi_device *sdev = to_scsi_device(dev);
enum scsi_device_state state = 0;
for (i = 0; i < ARRAY_SIZE(sdev_states); i++) {
const int len = strlen(sdev_states[i].name);
if (strncmp(sdev_states[i].name, buf, len) == 0 &&
buf[len] == '\n') {
state = sdev_states[i].value;
break;
}
}
if (!state)
return -EINVAL;
if (scsi_device_set_state(sdev, state))
return -EINVAL;
return count;
}
static ssize_t
show_state_field(struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
const char *name = scsi_device_state_name(sdev->sdev_state);
if (!name)
return -EINVAL;
return snprintf(buf, 20, "%s\n", name);
}
static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, show_state_field, store_state_field);
static ssize_t
show_queue_type_field(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
const char *name = "none";
if (sdev->ordered_tags)
name = "ordered";
else if (sdev->simple_tags)
name = "simple";
return snprintf(buf, 20, "%s\n", name);
}
static DEVICE_ATTR(queue_type, S_IRUGO, show_queue_type_field, NULL);
static ssize_t
show_iostat_counterbits(struct device *dev, struct device_attribute *attr, char *buf)
{
return snprintf(buf, 20, "%d\n", (int)sizeof(atomic_t) * 8);
}
static DEVICE_ATTR(iocounterbits, S_IRUGO, show_iostat_counterbits, NULL);
#define show_sdev_iostat(field) \
static ssize_t \
show_iostat_##field(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct scsi_device *sdev = to_scsi_device(dev); \
unsigned long long count = atomic_read(&sdev->field); \
return snprintf(buf, 20, "0x%llx\n", count); \
} \
static DEVICE_ATTR(field, S_IRUGO, show_iostat_##field, NULL)
show_sdev_iostat(iorequest_cnt);
show_sdev_iostat(iodone_cnt);
show_sdev_iostat(ioerr_cnt);
[SCSI] modalias for scsi devices The following patch adds support for sysfs/uevent modalias attribute for scsi devices (like disks, tapes, cdroms etc), based on whatever current sd.c, sr.c, st.c and osst.c drivers supports. The modalias format is like this: scsi:type-0x04 (for TYPE_WORM, handled by sr.c now). Several comments. o This hexadecimal type value is because all TYPE_XXX constants in include/scsi/scsi.h are given in hex, but __stringify() will not convert them to decimal (so it will NOT be scsi:type-4). Since it does not really matter in which format it is, while both modalias in module and modalias attribute match each other, I descided to go for that 0x%02x format (and added a comment in include/scsi/scsi.h to keep them that way), instead of changing them all to decimal. o There was no .uevent routine for SCSI bus. It might be a good idea to add some more ueven environment variables in there. o osst.c driver handles tapes too, like st.c, but only SOME tapes. With this setup, hotplug scripts (or whatever is used by the user) will try to load both st and osst modules for all SCSI tapes found, because both modules have scsi:type-0x01 alias). It is not harmful, but one extra module is no good either. It is possible to solve this, by exporting more info in modalias attribute, including vendor and device identification strings, so that modalias becomes something like scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive and having that, match for all 3 attributes, not only device type. But oh well, vendor and device strings may be large, and they do contain spaces and whatnot. So I left them for now, awaiting for comments first. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 16:02:37 +04:00
static ssize_t
sdev_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev;
sdev = to_scsi_device(dev);
return snprintf (buf, 20, SCSI_DEVICE_MODALIAS_FMT "\n", sdev->type);
}
static DEVICE_ATTR(modalias, S_IRUGO, sdev_show_modalias, NULL);
#define DECLARE_EVT_SHOW(name, Cap_name) \
static ssize_t \
sdev_show_evt_##name(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct scsi_device *sdev = to_scsi_device(dev); \
int val = test_bit(SDEV_EVT_##Cap_name, sdev->supported_events);\
return snprintf(buf, 20, "%d\n", val); \
}
#define DECLARE_EVT_STORE(name, Cap_name) \
static ssize_t \
sdev_store_evt_##name(struct device *dev, struct device_attribute *attr,\
const char *buf, size_t count) \
{ \
struct scsi_device *sdev = to_scsi_device(dev); \
int val = simple_strtoul(buf, NULL, 0); \
if (val == 0) \
clear_bit(SDEV_EVT_##Cap_name, sdev->supported_events); \
else if (val == 1) \
set_bit(SDEV_EVT_##Cap_name, sdev->supported_events); \
else \
return -EINVAL; \
return count; \
}
#define DECLARE_EVT(name, Cap_name) \
DECLARE_EVT_SHOW(name, Cap_name) \
DECLARE_EVT_STORE(name, Cap_name) \
static DEVICE_ATTR(evt_##name, S_IRUGO, sdev_show_evt_##name, \
sdev_store_evt_##name);
#define REF_EVT(name) &dev_attr_evt_##name.attr
DECLARE_EVT(media_change, MEDIA_CHANGE)
/* Default template for device attributes. May NOT be modified */
static struct attribute *scsi_sdev_attrs[] = {
&dev_attr_device_blocked.attr,
&dev_attr_type.attr,
&dev_attr_scsi_level.attr,
&dev_attr_vendor.attr,
&dev_attr_model.attr,
&dev_attr_rev.attr,
&dev_attr_rescan.attr,
&dev_attr_delete.attr,
&dev_attr_state.attr,
&dev_attr_timeout.attr,
&dev_attr_iocounterbits.attr,
&dev_attr_iorequest_cnt.attr,
&dev_attr_iodone_cnt.attr,
&dev_attr_ioerr_cnt.attr,
&dev_attr_modalias.attr,
REF_EVT(media_change),
NULL
};
static struct attribute_group scsi_sdev_attr_group = {
.attrs = scsi_sdev_attrs,
};
static const struct attribute_group *scsi_sdev_attr_groups[] = {
&scsi_sdev_attr_group,
NULL
};
static ssize_t
sdev_store_queue_depth_rw(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int depth, retval;
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_host_template *sht = sdev->host->hostt;
if (!sht->change_queue_depth)
return -EINVAL;
depth = simple_strtoul(buf, NULL, 0);
if (depth < 1)
return -EINVAL;
retval = sht->change_queue_depth(sdev, depth,
SCSI_QDEPTH_DEFAULT);
if (retval < 0)
return retval;
[SCSI] add queue_depth ramp up code Current FC HBA queue_depth ramp up code depends on last queue full time. The sdev already has last_queue_full_time field to track last queue full time but stored value is truncated by last four bits. So this patch updates last_queue_full_time without truncating last 4 bits to store full value and then updates its only current usages in scsi_track_queue_full to ignore last four bits to keep current usages same while also use this field in added ramp up code. Adds scsi_handle_queue_ramp_up to ramp up queue_depth on successful completion of IO. The scsi_handle_queue_ramp_up will do ramp up on all luns of a target, just same as ramp down done on all luns on a target. The ramp up is skipped in case the change_queue_depth is not supported by LLD or already reached to added max_queue_depth. Updates added max_queue_depth on every new update to default queue_depth value. The ramp up is also skipped if lapsed time since either last queue ramp up or down is less than LLD specified queue_ramp_up_period. Adds queue_ramp_up_period to sysfs but only if change_queue_depth is supported since ramp up and queue_ramp_up_period is needed only in case change_queue_depth is supported first. Initializes queue_ramp_up_period to 120HZ jiffies as initial default value, it is same as used in existing lpfc and qla2xxx. -v2 Combined all ramp code into this single patch. -v3 Moves max_queue_depth initialization after slave_configure is called from after slave_alloc calling done. Also adjusted max_queue_depth check to skip ramp up if current queue_depth is >= max_queue_depth. -v4 Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f to store or show its value. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-23 02:46:33 +04:00
sdev->max_queue_depth = sdev->queue_depth;
return count;
}
static struct device_attribute sdev_attr_queue_depth_rw =
__ATTR(queue_depth, S_IRUGO | S_IWUSR, sdev_show_queue_depth,
sdev_store_queue_depth_rw);
[SCSI] add queue_depth ramp up code Current FC HBA queue_depth ramp up code depends on last queue full time. The sdev already has last_queue_full_time field to track last queue full time but stored value is truncated by last four bits. So this patch updates last_queue_full_time without truncating last 4 bits to store full value and then updates its only current usages in scsi_track_queue_full to ignore last four bits to keep current usages same while also use this field in added ramp up code. Adds scsi_handle_queue_ramp_up to ramp up queue_depth on successful completion of IO. The scsi_handle_queue_ramp_up will do ramp up on all luns of a target, just same as ramp down done on all luns on a target. The ramp up is skipped in case the change_queue_depth is not supported by LLD or already reached to added max_queue_depth. Updates added max_queue_depth on every new update to default queue_depth value. The ramp up is also skipped if lapsed time since either last queue ramp up or down is less than LLD specified queue_ramp_up_period. Adds queue_ramp_up_period to sysfs but only if change_queue_depth is supported since ramp up and queue_ramp_up_period is needed only in case change_queue_depth is supported first. Initializes queue_ramp_up_period to 120HZ jiffies as initial default value, it is same as used in existing lpfc and qla2xxx. -v2 Combined all ramp code into this single patch. -v3 Moves max_queue_depth initialization after slave_configure is called from after slave_alloc calling done. Also adjusted max_queue_depth check to skip ramp up if current queue_depth is >= max_queue_depth. -v4 Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f to store or show its value. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-23 02:46:33 +04:00
static ssize_t
sdev_show_queue_ramp_up_period(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev;
sdev = to_scsi_device(dev);
return snprintf(buf, 20, "%u\n",
jiffies_to_msecs(sdev->queue_ramp_up_period));
}
static ssize_t
sdev_store_queue_ramp_up_period(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct scsi_device *sdev = to_scsi_device(dev);
unsigned long period;
if (strict_strtoul(buf, 10, &period))
return -EINVAL;
sdev->queue_ramp_up_period = msecs_to_jiffies(period);
return period;
}
static struct device_attribute sdev_attr_queue_ramp_up_period =
__ATTR(queue_ramp_up_period, S_IRUGO | S_IWUSR,
sdev_show_queue_ramp_up_period,
sdev_store_queue_ramp_up_period);
static ssize_t
sdev_store_queue_type_rw(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct scsi_host_template *sht = sdev->host->hostt;
int tag_type = 0, retval;
int prev_tag_type = scsi_get_tag_type(sdev);
if (!sdev->tagged_supported || !sht->change_queue_type)
return -EINVAL;
if (strncmp(buf, "ordered", 7) == 0)
tag_type = MSG_ORDERED_TAG;
else if (strncmp(buf, "simple", 6) == 0)
tag_type = MSG_SIMPLE_TAG;
else if (strncmp(buf, "none", 4) != 0)
return -EINVAL;
if (tag_type == prev_tag_type)
return count;
retval = sht->change_queue_type(sdev, tag_type);
if (retval < 0)
return retval;
return count;
}
static int scsi_target_add(struct scsi_target *starget)
{
int error;
if (starget->state != STARGET_CREATED)
return 0;
error = device_add(&starget->dev);
if (error) {
dev_err(&starget->dev, "target device_add failed, error %d\n", error);
return error;
}
transport_add_device(&starget->dev);
starget->state = STARGET_RUNNING;
[SCSI] implement runtime Power Management This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-17 18:41:42 +04:00
pm_runtime_set_active(&starget->dev);
pm_runtime_enable(&starget->dev);
device_enable_async_suspend(&starget->dev);
return 0;
}
static struct device_attribute sdev_attr_queue_type_rw =
__ATTR(queue_type, S_IRUGO | S_IWUSR, show_queue_type_field,
sdev_store_queue_type_rw);
/**
* scsi_sysfs_add_sdev - add scsi device to sysfs
* @sdev: scsi_device to add
*
* Return value:
* 0 on Success / non-zero on Failure
**/
int scsi_sysfs_add_sdev(struct scsi_device *sdev)
{
int error, i;
struct request_queue *rq = sdev->request_queue;
struct scsi_target *starget = sdev->sdev_target;
error = scsi_device_set_state(sdev, SDEV_RUNNING);
if (error)
return error;
error = scsi_target_add(starget);
if (error)
return error;
transport_configure_device(&starget->dev);
[SCSI] implement runtime Power Management This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-17 18:41:42 +04:00
device_enable_async_suspend(&sdev->sdev_gendev);
[SCSI] implement runtime Power Management This patch (as1398b) adds runtime PM support to the SCSI layer. Only the machanism is provided; use of it is up to the various high-level drivers, and the patch doesn't change any of them. Except for sg -- the patch expicitly prevents a device from being runtime-suspended while its sg device file is open. The implementation is simplistic. In general, hosts and targets are automatically suspended when all their children are asleep, but for them the runtime-suspend code doesn't actually do anything. (A host's runtime PM status is propagated up the device tree, though, so a runtime-PM-aware lower-level driver could power down the host adapter hardware at the appropriate times.) There are comments indicating where a transport class might be notified or some other hooks added. LUNs are runtime-suspended by calling the drivers' existing suspend handlers (and likewise for runtime-resume). Somewhat arbitrarily, the implementation delays for 100 ms before suspending an eligible LUN. This is because there typically are occasions during bootup when the same device file is opened and closed several times in quick succession. The way this all works is that the SCSI core increments a device's PM-usage count when it is registered. If a high-level driver does nothing then the device will not be eligible for runtime-suspend because of the elevated usage count. If a high-level driver wants to use runtime PM then it can call scsi_autopm_put_device() in its probe routine to decrement the usage count and scsi_autopm_get_device() in its remove routine to restore the original count. Hosts, targets, and LUNs are not suspended while they are being probed or removed, or while the error handler is running. In fact, a fairly large part of the patch consists of code to make sure that things aren't suspended at such times. [jejb: fix up compile issues in PM config variations] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-06-17 18:41:42 +04:00
scsi_autopm_get_target(starget);
pm_runtime_set_active(&sdev->sdev_gendev);
pm_runtime_forbid(&sdev->sdev_gendev);
pm_runtime_enable(&sdev->sdev_gendev);
scsi_autopm_put_target(starget);
/* The following call will keep sdev active indefinitely, until
* its driver does a corresponding scsi_autopm_pm_device(). Only
* drivers supporting autosuspend will do this.
*/
scsi_autopm_get_device(sdev);
error = device_add(&sdev->sdev_gendev);
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add device: %d\n", error);
return error;
}
device_enable_async_suspend(&sdev->sdev_dev);
error = device_add(&sdev->sdev_dev);
if (error) {
sdev_printk(KERN_INFO, sdev,
"failed to add class device: %d\n", error);
device_del(&sdev->sdev_gendev);
return error;
}
transport_add_device(&sdev->sdev_gendev);
sdev->is_visible = 1;
/* create queue files, which may be writable, depending on the host */
[SCSI] add queue_depth ramp up code Current FC HBA queue_depth ramp up code depends on last queue full time. The sdev already has last_queue_full_time field to track last queue full time but stored value is truncated by last four bits. So this patch updates last_queue_full_time without truncating last 4 bits to store full value and then updates its only current usages in scsi_track_queue_full to ignore last four bits to keep current usages same while also use this field in added ramp up code. Adds scsi_handle_queue_ramp_up to ramp up queue_depth on successful completion of IO. The scsi_handle_queue_ramp_up will do ramp up on all luns of a target, just same as ramp down done on all luns on a target. The ramp up is skipped in case the change_queue_depth is not supported by LLD or already reached to added max_queue_depth. Updates added max_queue_depth on every new update to default queue_depth value. The ramp up is also skipped if lapsed time since either last queue ramp up or down is less than LLD specified queue_ramp_up_period. Adds queue_ramp_up_period to sysfs but only if change_queue_depth is supported since ramp up and queue_ramp_up_period is needed only in case change_queue_depth is supported first. Initializes queue_ramp_up_period to 120HZ jiffies as initial default value, it is same as used in existing lpfc and qla2xxx. -v2 Combined all ramp code into this single patch. -v3 Moves max_queue_depth initialization after slave_configure is called from after slave_alloc calling done. Also adjusted max_queue_depth check to skip ramp up if current queue_depth is >= max_queue_depth. -v4 Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f to store or show its value. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-23 02:46:33 +04:00
if (sdev->host->hostt->change_queue_depth) {
error = device_create_file(&sdev->sdev_gendev,
&sdev_attr_queue_depth_rw);
error = device_create_file(&sdev->sdev_gendev,
&sdev_attr_queue_ramp_up_period);
}
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth);
if (error)
return error;
if (sdev->host->hostt->change_queue_type)
error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw);
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type);
if (error)
return error;
error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL);
if (error)
/* we're treating error on bsg register as non-fatal,
* so pretend nothing went wrong */
sdev_printk(KERN_INFO, sdev,
"Failed to register bsg queue, errno=%d\n", error);
/* add additional host specific attributes */
if (sdev->host->hostt->sdev_attrs) {
for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) {
error = device_create_file(&sdev->sdev_gendev,
sdev->host->hostt->sdev_attrs[i]);
if (error)
return error;
}
}
return error;
}
void __scsi_remove_device(struct scsi_device *sdev)
{
struct device *dev = &sdev->sdev_gendev;
if (sdev->is_visible) {
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
return;
bsg_unregister_queue(sdev->request_queue);
device_unregister(&sdev->sdev_dev);
transport_remove_device(dev);
device_del(dev);
} else
put_device(&sdev->sdev_dev);
/*
* Stop accepting new requests and wait until all queuecommand() and
* scsi_run_queue() invocations have finished before tearing down the
* device.
*/
scsi_device_set_state(sdev, SDEV_DEL);
blk_cleanup_queue(sdev->request_queue);
cancel_work_sync(&sdev->requeue_work);
if (sdev->host->hostt->slave_destroy)
sdev->host->hostt->slave_destroy(sdev);
transport_destroy_device(dev);
put_device(dev);
}
/**
* scsi_remove_device - unregister a device from the scsi bus
* @sdev: scsi_device to unregister
**/
void scsi_remove_device(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
mutex_lock(&shost->scan_mutex);
__scsi_remove_device(sdev);
mutex_unlock(&shost->scan_mutex);
}
EXPORT_SYMBOL(scsi_remove_device);
static void __scsi_remove_target(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
unsigned long flags;
struct scsi_device *sdev;
spin_lock_irqsave(shost->host_lock, flags);
restart:
list_for_each_entry(sdev, &shost->__devices, siblings) {
if (sdev->channel != starget->channel ||
sdev->id != starget->id ||
[SCSI] Fix race when removing SCSI devices Removing SCSI devices through echo 1 > /sys/bus/scsi/devices/ ... /delete while the FC transport class removes the SCSI target can lead to an oops: Unable to handle kernel pointer dereference at virtual kernel address 00000000b6815000 Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: sunrpc qeth_l3 binfmt_misc dm_multipath scsi_dh dm_mod ipv6 qeth ccwgroup [last unloaded: scsi_wait_scan] CPU: 1 Not tainted 2.6.35.5-45.x.20100924-s390xdefault #1 Process fc_wq_0 (pid: 861, task: 00000000b7331240, ksp: 00000000b735bac0) Krnl PSW : 0704200180000000 00000000003ff6e4 (__scsi_remove_device+0x24/0xd0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000001 0000000000000000 00000000b6815000 00000000bc24a8c0 00000000003ff7c8 000000000056dbb8 0000000000000002 0000000000835d80 ffffffff00000000 0000000000001000 00000000b6815000 00000000bc24a7f0 00000000b68151a0 00000000b6815000 00000000b735bc20 00000000b735bbf8 Krnl Code: 00000000003ff6d6: a7840001 brc 8,3ff6d8 00000000003ff6da: a7fbffd8 aghi %r15,-40 00000000003ff6de: e3e0f0980024 stg %r14,152(%r15) >00000000003ff6e4: e31021200004 lg %r1,288(%r2) 00000000003ff6ea: a71f0000 cghi %r1,0 00000000003ff6ee: a7a40011 brc 10,3ff710 00000000003ff6f2: a7390003 lghi %r3,3 00000000003ff6f6: c0e5ffffc8b1 brasl %r14,3f8858 Call Trace: ([<0000000000001000>] 0x1000) [<00000000003ff7d2>] scsi_remove_device+0x42/0x54 [<00000000003ff8ba>] __scsi_remove_target+0xca/0xfc [<00000000003ff99a>] __remove_child+0x3a/0x48 [<00000000003e3246>] device_for_each_child+0x72/0xbc [<00000000003ff93a>] scsi_remove_target+0x4e/0x74 [<0000000000406586>] fc_rport_final_delete+0xb2/0x23c [<000000000015d080>] worker_thread+0x200/0x344 [<000000000016330c>] kthread+0xa0/0xa8 [<0000000000106c1a>] kernel_thread_starter+0x6/0xc [<0000000000106c14>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000003ff7cc>] scsi_remove_device+0x3c/0x54 The function __scsi_remove_target iterates through the SCSI devices on the host, but it drops the host_lock before calling scsi_remove_device. When the SCSI device is deleted from another thread, the pointer to the SCSI device in scsi_remove_device can become invalid. Fix this by getting a reference to the SCSI device before dropping the host_lock to keep the SCSI device alive for the call to scsi_remove_device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-06 15:19:44 +04:00
scsi_device_get(sdev))
continue;
spin_unlock_irqrestore(shost->host_lock, flags);
scsi_remove_device(sdev);
[SCSI] Fix race when removing SCSI devices Removing SCSI devices through echo 1 > /sys/bus/scsi/devices/ ... /delete while the FC transport class removes the SCSI target can lead to an oops: Unable to handle kernel pointer dereference at virtual kernel address 00000000b6815000 Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: sunrpc qeth_l3 binfmt_misc dm_multipath scsi_dh dm_mod ipv6 qeth ccwgroup [last unloaded: scsi_wait_scan] CPU: 1 Not tainted 2.6.35.5-45.x.20100924-s390xdefault #1 Process fc_wq_0 (pid: 861, task: 00000000b7331240, ksp: 00000000b735bac0) Krnl PSW : 0704200180000000 00000000003ff6e4 (__scsi_remove_device+0x24/0xd0) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000001 0000000000000000 00000000b6815000 00000000bc24a8c0 00000000003ff7c8 000000000056dbb8 0000000000000002 0000000000835d80 ffffffff00000000 0000000000001000 00000000b6815000 00000000bc24a7f0 00000000b68151a0 00000000b6815000 00000000b735bc20 00000000b735bbf8 Krnl Code: 00000000003ff6d6: a7840001 brc 8,3ff6d8 00000000003ff6da: a7fbffd8 aghi %r15,-40 00000000003ff6de: e3e0f0980024 stg %r14,152(%r15) >00000000003ff6e4: e31021200004 lg %r1,288(%r2) 00000000003ff6ea: a71f0000 cghi %r1,0 00000000003ff6ee: a7a40011 brc 10,3ff710 00000000003ff6f2: a7390003 lghi %r3,3 00000000003ff6f6: c0e5ffffc8b1 brasl %r14,3f8858 Call Trace: ([<0000000000001000>] 0x1000) [<00000000003ff7d2>] scsi_remove_device+0x42/0x54 [<00000000003ff8ba>] __scsi_remove_target+0xca/0xfc [<00000000003ff99a>] __remove_child+0x3a/0x48 [<00000000003e3246>] device_for_each_child+0x72/0xbc [<00000000003ff93a>] scsi_remove_target+0x4e/0x74 [<0000000000406586>] fc_rport_final_delete+0xb2/0x23c [<000000000015d080>] worker_thread+0x200/0x344 [<000000000016330c>] kthread+0xa0/0xa8 [<0000000000106c1a>] kernel_thread_starter+0x6/0xc [<0000000000106c14>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000003ff7cc>] scsi_remove_device+0x3c/0x54 The function __scsi_remove_target iterates through the SCSI devices on the host, but it drops the host_lock before calling scsi_remove_device. When the SCSI device is deleted from another thread, the pointer to the SCSI device in scsi_remove_device can become invalid. Fix this by getting a reference to the SCSI device before dropping the host_lock to keep the SCSI device alive for the call to scsi_remove_device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-06 15:19:44 +04:00
scsi_device_put(sdev);
spin_lock_irqsave(shost->host_lock, flags);
goto restart;
}
spin_unlock_irqrestore(shost->host_lock, flags);
}
/**
* scsi_remove_target - try to remove a target and all its devices
* @dev: generic starget or parent of generic stargets to be removed
*
* Note: This is slightly racy. It is possible that if the user
* requests the addition of another device then the target won't be
* removed.
*/
void scsi_remove_target(struct device *dev)
{
struct Scsi_Host *shost = dev_to_shost(dev->parent);
struct scsi_target *starget, *found;
unsigned long flags;
restart:
found = NULL;
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(starget, &shost->__targets, siblings) {
if (starget->state == STARGET_DEL)
continue;
if (starget->dev.parent == dev || &starget->dev == dev) {
found = starget;
found->reap_ref++;
break;
}
}
spin_unlock_irqrestore(shost->host_lock, flags);
if (found) {
__scsi_remove_target(found);
scsi_target_reap(found);
/* in the case where @dev has multiple starget children,
* continue removing.
*
* FIXME: does such a case exist?
*/
goto restart;
}
}
EXPORT_SYMBOL(scsi_remove_target);
int scsi_register_driver(struct device_driver *drv)
{
drv->bus = &scsi_bus_type;
return driver_register(drv);
}
EXPORT_SYMBOL(scsi_register_driver);
int scsi_register_interface(struct class_interface *intf)
{
intf->class = &sdev_class;
return class_interface_register(intf);
}
EXPORT_SYMBOL(scsi_register_interface);
/**
* scsi_sysfs_add_host - add scsi host to subsystem
* @shost: scsi host struct to add to subsystem
**/
int scsi_sysfs_add_host(struct Scsi_Host *shost)
{
int error, i;
/* add host specific attributes */
if (shost->hostt->shost_attrs) {
for (i = 0; shost->hostt->shost_attrs[i]; i++) {
error = device_create_file(&shost->shost_dev,
shost->hostt->shost_attrs[i]);
if (error)
return error;
}
}
transport_register_device(&shost->shost_gendev);
transport_configure_device(&shost->shost_gendev);
return 0;
}
static struct device_type scsi_dev_type = {
.name = "scsi_device",
.release = scsi_device_dev_release,
.groups = scsi_sdev_attr_groups,
};
void scsi_sysfs_device_initialize(struct scsi_device *sdev)
{
unsigned long flags;
struct Scsi_Host *shost = sdev->host;
struct scsi_target *starget = sdev->sdev_target;
device_initialize(&sdev->sdev_gendev);
sdev->sdev_gendev.bus = &scsi_bus_type;
sdev->sdev_gendev.type = &scsi_dev_type;
dev_set_name(&sdev->sdev_gendev, "%d:%d:%d:%d",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
device_initialize(&sdev->sdev_dev);
sdev->sdev_dev.parent = get_device(&sdev->sdev_gendev);
sdev->sdev_dev.class = &sdev_class;
dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
sdev->scsi_level = starget->scsi_level;
transport_setup_device(&sdev->sdev_gendev);
spin_lock_irqsave(shost->host_lock, flags);
list_add_tail(&sdev->same_target_siblings, &starget->devices);
list_add_tail(&sdev->siblings, &shost->__devices);
spin_unlock_irqrestore(shost->host_lock, flags);
}
int scsi_is_sdev_device(const struct device *dev)
{
return dev->type == &scsi_dev_type;
}
EXPORT_SYMBOL(scsi_is_sdev_device);
/* A blank transport template that is used in drivers that don't
* yet implement Transport Attributes */
struct scsi_transport_template blank_transport_template = { { { {NULL, }, }, }, };