WSL2-Linux-Kernel/drivers/hwmon/max31790.c

535 строки
13 KiB
C
Исходник Обычный вид История

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 09:55:06 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* max31790.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring.
*
* (C) 2015 by Il Han <corone.il.han@gmail.com>
*/
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/slab.h>
/* MAX31790 registers */
#define MAX31790_REG_GLOBAL_CONFIG 0x00
#define MAX31790_REG_FAN_CONFIG(ch) (0x02 + (ch))
#define MAX31790_REG_FAN_DYNAMICS(ch) (0x08 + (ch))
#define MAX31790_REG_FAN_FAULT_STATUS2 0x10
#define MAX31790_REG_FAN_FAULT_STATUS1 0x11
#define MAX31790_REG_TACH_COUNT(ch) (0x18 + (ch) * 2)
#define MAX31790_REG_PWM_DUTY_CYCLE(ch) (0x30 + (ch) * 2)
#define MAX31790_REG_PWMOUT(ch) (0x40 + (ch) * 2)
#define MAX31790_REG_TARGET_COUNT(ch) (0x50 + (ch) * 2)
/* Fan Config register bits */
#define MAX31790_FAN_CFG_RPM_MODE 0x80
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
#define MAX31790_FAN_CFG_CTRL_MON 0x10
#define MAX31790_FAN_CFG_TACH_INPUT_EN 0x08
#define MAX31790_FAN_CFG_TACH_INPUT 0x01
/* Fan Dynamics register bits */
#define MAX31790_FAN_DYN_SR_SHIFT 5
#define MAX31790_FAN_DYN_SR_MASK 0xE0
#define SR_FROM_REG(reg) (((reg) & MAX31790_FAN_DYN_SR_MASK) \
>> MAX31790_FAN_DYN_SR_SHIFT)
#define FAN_RPM_MIN 120
#define FAN_RPM_MAX 7864320
#define FAN_COUNT_REG_MAX 0xffe0
#define RPM_FROM_REG(reg, sr) (((reg) >> 4) ? \
((60 * (sr) * 8192) / ((reg) >> 4)) : \
FAN_RPM_MAX)
#define RPM_TO_REG(rpm, sr) ((60 * (sr) * 8192) / ((rpm) * 2))
#define NR_CHANNEL 6
/*
* Client data (each client gets its own)
*/
struct max31790_data {
struct i2c_client *client;
struct mutex update_lock;
bool valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
/* register values */
u8 fan_config[NR_CHANNEL];
u8 fan_dynamics[NR_CHANNEL];
u16 fault_status;
u16 tach[NR_CHANNEL * 2];
u16 pwm[NR_CHANNEL];
u16 target_count[NR_CHANNEL];
};
static struct max31790_data *max31790_update_device(struct device *dev)
{
struct max31790_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
struct max31790_data *ret = data;
int i;
int rv;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
rv = i2c_smbus_read_byte_data(client,
MAX31790_REG_FAN_FAULT_STATUS1);
if (rv < 0)
goto abort;
data->fault_status |= rv & 0x3F;
rv = i2c_smbus_read_byte_data(client,
MAX31790_REG_FAN_FAULT_STATUS2);
if (rv < 0)
goto abort;
data->fault_status |= (rv & 0x3F) << 6;
for (i = 0; i < NR_CHANNEL; i++) {
rv = i2c_smbus_read_word_swapped(client,
MAX31790_REG_TACH_COUNT(i));
if (rv < 0)
goto abort;
data->tach[i] = rv;
if (data->fan_config[i]
& MAX31790_FAN_CFG_TACH_INPUT) {
rv = i2c_smbus_read_word_swapped(client,
MAX31790_REG_TACH_COUNT(NR_CHANNEL
+ i));
if (rv < 0)
goto abort;
data->tach[NR_CHANNEL + i] = rv;
} else {
rv = i2c_smbus_read_word_swapped(client,
MAX31790_REG_PWM_DUTY_CYCLE(i));
if (rv < 0)
goto abort;
data->pwm[i] = rv;
rv = i2c_smbus_read_word_swapped(client,
MAX31790_REG_TARGET_COUNT(i));
if (rv < 0)
goto abort;
data->target_count[i] = rv;
}
}
data->last_updated = jiffies;
data->valid = true;
}
goto done;
abort:
data->valid = false;
ret = ERR_PTR(rv);
done:
mutex_unlock(&data->update_lock);
return ret;
}
static const u8 tach_period[8] = { 1, 2, 4, 8, 16, 32, 32, 32 };
static u8 get_tach_period(u8 fan_dynamics)
{
return tach_period[SR_FROM_REG(fan_dynamics)];
}
static u8 bits_for_tach_period(int rpm)
{
u8 bits;
if (rpm < 500)
bits = 0x0;
else if (rpm < 1000)
bits = 0x1;
else if (rpm < 2000)
bits = 0x2;
else if (rpm < 4000)
bits = 0x3;
else if (rpm < 8000)
bits = 0x4;
else
bits = 0x5;
return bits;
}
static int max31790_read_fan(struct device *dev, u32 attr, int channel,
long *val)
{
struct max31790_data *data = max31790_update_device(dev);
int sr, rpm;
if (IS_ERR(data))
return PTR_ERR(data);
switch (attr) {
case hwmon_fan_input:
sr = get_tach_period(data->fan_dynamics[channel % NR_CHANNEL]);
if (data->tach[channel] == FAN_COUNT_REG_MAX)
rpm = 0;
else
rpm = RPM_FROM_REG(data->tach[channel], sr);
*val = rpm;
return 0;
case hwmon_fan_target:
sr = get_tach_period(data->fan_dynamics[channel]);
rpm = RPM_FROM_REG(data->target_count[channel], sr);
*val = rpm;
return 0;
case hwmon_fan_fault:
mutex_lock(&data->update_lock);
*val = !!(data->fault_status & (1 << channel));
data->fault_status &= ~(1 << channel);
/*
* If a fault bit is set, we need to write into one of the fan
* configuration registers to clear it. Note that this also
* clears the fault for the companion channel if enabled.
*/
if (*val) {
int reg = MAX31790_REG_TARGET_COUNT(channel % NR_CHANNEL);
i2c_smbus_write_byte_data(data->client, reg,
data->target_count[channel % NR_CHANNEL] >> 8);
}
mutex_unlock(&data->update_lock);
return 0;
default:
return -EOPNOTSUPP;
}
}
static int max31790_write_fan(struct device *dev, u32 attr, int channel,
long val)
{
struct max31790_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
int target_count;
int err = 0;
u8 bits;
int sr;
mutex_lock(&data->update_lock);
switch (attr) {
case hwmon_fan_target:
val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX);
bits = bits_for_tach_period(val);
data->fan_dynamics[channel] =
((data->fan_dynamics[channel] &
~MAX31790_FAN_DYN_SR_MASK) |
(bits << MAX31790_FAN_DYN_SR_SHIFT));
err = i2c_smbus_write_byte_data(client,
MAX31790_REG_FAN_DYNAMICS(channel),
data->fan_dynamics[channel]);
if (err < 0)
break;
sr = get_tach_period(data->fan_dynamics[channel]);
target_count = RPM_TO_REG(val, sr);
target_count = clamp_val(target_count, 0x1, 0x7FF);
data->target_count[channel] = target_count << 5;
err = i2c_smbus_write_word_swapped(client,
MAX31790_REG_TARGET_COUNT(channel),
data->target_count[channel]);
break;
default:
err = -EOPNOTSUPP;
break;
}
mutex_unlock(&data->update_lock);
return err;
}
static umode_t max31790_fan_is_visible(const void *_data, u32 attr, int channel)
{
const struct max31790_data *data = _data;
u8 fan_config = data->fan_config[channel % NR_CHANNEL];
switch (attr) {
case hwmon_fan_input:
case hwmon_fan_fault:
if (channel < NR_CHANNEL ||
(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
return 0444;
return 0;
case hwmon_fan_target:
if (channel < NR_CHANNEL &&
!(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
return 0644;
return 0;
default:
return 0;
}
}
static int max31790_read_pwm(struct device *dev, u32 attr, int channel,
long *val)
{
struct max31790_data *data = max31790_update_device(dev);
u8 fan_config;
if (IS_ERR(data))
return PTR_ERR(data);
fan_config = data->fan_config[channel];
switch (attr) {
case hwmon_pwm_input:
*val = data->pwm[channel] >> 8;
return 0;
case hwmon_pwm_enable:
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
if (fan_config & MAX31790_FAN_CFG_CTRL_MON)
*val = 0;
else if (fan_config & MAX31790_FAN_CFG_RPM_MODE)
*val = 2;
else
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
*val = 1;
return 0;
default:
return -EOPNOTSUPP;
}
}
static int max31790_write_pwm(struct device *dev, u32 attr, int channel,
long val)
{
struct max31790_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
u8 fan_config;
int err = 0;
mutex_lock(&data->update_lock);
switch (attr) {
case hwmon_pwm_input:
if (val < 0 || val > 255) {
err = -EINVAL;
break;
}
data->valid = false;
err = i2c_smbus_write_word_swapped(client,
MAX31790_REG_PWMOUT(channel),
val << 8);
break;
case hwmon_pwm_enable:
fan_config = data->fan_config[channel];
if (val == 0) {
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
fan_config |= MAX31790_FAN_CFG_CTRL_MON;
/*
* Disable RPM mode; otherwise disabling fan speed
* monitoring is not possible.
*/
fan_config &= ~MAX31790_FAN_CFG_RPM_MODE;
} else if (val == 1) {
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
fan_config &= ~(MAX31790_FAN_CFG_CTRL_MON | MAX31790_FAN_CFG_RPM_MODE);
} else if (val == 2) {
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
fan_config &= ~MAX31790_FAN_CFG_CTRL_MON;
/*
* The chip sets MAX31790_FAN_CFG_TACH_INPUT_EN on its
* own if MAX31790_FAN_CFG_RPM_MODE is set.
* Do it here as well to reflect the actual register
* value in the cache.
*/
fan_config |= (MAX31790_FAN_CFG_RPM_MODE | MAX31790_FAN_CFG_TACH_INPUT_EN);
} else {
err = -EINVAL;
break;
}
hwmon: (max31790) Fix pwmX_enable attributes pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát <jan.kundrat@cesnet.cz> Cc: Václav Kubernát <kubernat@cesnet.cz> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Václav Kubernát <kubernat@cesnet.cz> Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
2021-05-26 18:40:18 +03:00
if (fan_config != data->fan_config[channel]) {
err = i2c_smbus_write_byte_data(client, MAX31790_REG_FAN_CONFIG(channel),
fan_config);
if (!err)
data->fan_config[channel] = fan_config;
}
break;
default:
err = -EOPNOTSUPP;
break;
}
mutex_unlock(&data->update_lock);
return err;
}
static umode_t max31790_pwm_is_visible(const void *_data, u32 attr, int channel)
{
const struct max31790_data *data = _data;
u8 fan_config = data->fan_config[channel];
switch (attr) {
case hwmon_pwm_input:
case hwmon_pwm_enable:
if (!(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
return 0644;
return 0;
default:
return 0;
}
}
static int max31790_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
switch (type) {
case hwmon_fan:
return max31790_read_fan(dev, attr, channel, val);
case hwmon_pwm:
return max31790_read_pwm(dev, attr, channel, val);
default:
return -EOPNOTSUPP;
}
}
static int max31790_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
switch (type) {
case hwmon_fan:
return max31790_write_fan(dev, attr, channel, val);
case hwmon_pwm:
return max31790_write_pwm(dev, attr, channel, val);
default:
return -EOPNOTSUPP;
}
}
static umode_t max31790_is_visible(const void *data,
enum hwmon_sensor_types type,
u32 attr, int channel)
{
switch (type) {
case hwmon_fan:
return max31790_fan_is_visible(data, attr, channel);
case hwmon_pwm:
return max31790_pwm_is_visible(data, attr, channel);
default:
return 0;
}
}
static const struct hwmon_channel_info *max31790_info[] = {
HWMON_CHANNEL_INFO(fan,
HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_FAULT,
HWMON_F_INPUT | HWMON_F_FAULT),
HWMON_CHANNEL_INFO(pwm,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
NULL
};
static const struct hwmon_ops max31790_hwmon_ops = {
.is_visible = max31790_is_visible,
.read = max31790_read,
.write = max31790_write,
};
static const struct hwmon_chip_info max31790_chip_info = {
.ops = &max31790_hwmon_ops,
.info = max31790_info,
};
static int max31790_init_client(struct i2c_client *client,
struct max31790_data *data)
{
int i, rv;
for (i = 0; i < NR_CHANNEL; i++) {
rv = i2c_smbus_read_byte_data(client,
MAX31790_REG_FAN_CONFIG(i));
if (rv < 0)
return rv;
data->fan_config[i] = rv;
rv = i2c_smbus_read_byte_data(client,
MAX31790_REG_FAN_DYNAMICS(i));
if (rv < 0)
return rv;
data->fan_dynamics[i] = rv;
}
return 0;
}
static int max31790_probe(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
struct device *dev = &client->dev;
struct max31790_data *data;
struct device *hwmon_dev;
int err;
if (!i2c_check_functionality(adapter,
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
data = devm_kzalloc(dev, sizeof(struct max31790_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->client = client;
mutex_init(&data->update_lock);
/*
* Initialize the max31790 chip
*/
err = max31790_init_client(client, data);
if (err)
return err;
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data,
&max31790_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id max31790_id[] = {
{ "max31790", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max31790_id);
static struct i2c_driver max31790_driver = {
.class = I2C_CLASS_HWMON,
.probe_new = max31790_probe,
.driver = {
.name = "max31790",
},
.id_table = max31790_id,
};
module_i2c_driver(max31790_driver);
MODULE_AUTHOR("Il Han <corone.il.han@gmail.com>");
MODULE_DESCRIPTION("MAX31790 sensor driver");
MODULE_LICENSE("GPL");