microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/usb/serial/cp210x.c

1156 строки
37 KiB
C
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
* Silicon Laboratories CP210x USB to RS232 serial adaptor driver
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*
* Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
* Support to set flow control line levels using TIOCMGET and TIOCMSET
* thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
* control thanks to Munir Nassar nassarmu@real-time.com
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/usb.h>
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
#include <linux/uaccess.h>
[PATCH] USB: move usb-serial.h to include/linux/usb/ USB serial outside of the kernel tree can not build properly due to usb-serial.h being buried down in the source tree. This patch moves the location of the file to include/linux/usb and fixes up all of the usb serial drivers to handle the move properly. Cc: Sergei Organov <osv@javad.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12 08:22:58 +04:00
#include <linux/usb/serial.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Function Prototypes
*/
tty: USB does not need the filp argument in the drivers And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-20 00:13:26 +04:00
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_close(struct usb_serial_port *);
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_get_termios_port(struct usb_serial_port *port,
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
unsigned int *cflagp, unsigned int *baudp);
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
struct ktermios *);
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:09:07 +04:00
struct ktermios*);
USB: cp210x: add tx_empty() Added tx_empty callback needed for generic wait-until-sent support. Without this function, when the port is closed usbserial can't know that there are still data in the chip's transmit FIFO. The chip gets disabled and untransmitted data lost. When the actual byte count is reported by tx-empty the close can be delayed until all data are sent. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: modify tx_empty error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-25 01:28:41 +03:00
static bool cp210x_tx_empty(struct usb_serial_port *port);
tiocmget: kill off the passing of the struct file We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 19:26:14 +03:00
static int cp210x_tiocmget(struct tty_struct *);
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 19:26:50 +03:00
static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
static int cp210x_tiocmset_port(struct usb_serial_port *port,
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
unsigned int, unsigned int);
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_break_ctl(struct tty_struct *, int);
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
static int cp210x_port_probe(struct usb_serial_port *);
static int cp210x_port_remove(struct usb_serial_port *);
tty: cp210x: Fix carrier handling Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-28 23:12:33 +03:00
static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB serial: make USB device id constant The id_table field of the struct usb_device_id is constant in <linux/usb.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Németh Márton <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-10 17:34:24 +03:00
static const struct usb_device_id id_table[] = {
USB: cp210x: Add Renesas RX-Stick device ID RX610 development board by Renesas Bus 001 Device 024: ID 045b:0053 Hitachi, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x045b Hitachi, Ltd idProduct 0x0053 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 RX-Stick iSerial 3 0001 . . . http://am.renesas.com/rx610stick Signed-off-by: DJ Delorie <dj@delorie.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-17 19:09:06 +04:00
{ USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */
USB: ACE1001 patch for cp2101.c The patch which adds IDs for AKTAKOM USB->RS232 cable (http://www.aktakom.ru/product/kio/ace-1001.htm) is attached. From: M Kondrin <mkondrin@hppi.troitsk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-14 13:02:45 +03:00
{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
USB: CP2101 Add new device IDs Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-12 19:15:54 +04:00
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile. The Pirelli DP-L10 mobile is sold under various brand names. One, already supported by cp210x, is the T-COM TC300. Here is the lsusb for that version: ------------------------------------------------------------------- Bus 001 Device 002: ID 0489:e000 Foxconn / Hon Hai T-Com TC 300 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0489 Foxconn / Hon Hai idProduct 0xe000 T-Com TC 300 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 TC 300 iSerial 3 0001 [snip] --------------------------------------------------------------------------- However the native Pirelli DP-L10 is not supported: ------------------------------------------------------------------ Bus 001 Device 003: ID 0489:e003 Foxconn / Hon Hai Pirelli DP-L10 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0489 Foxconn / Hon Hai idProduct 0xe003 Pirelli DP-L10 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 DP-L10 iSerial 3 0001 [snip] ------------------------------------------------------------------------- All that is required is an extra USB_DEVICE entry: { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM +Mobile */ The patch adds that entry. Tested under 2.6.36-rc2 from git. Signed-off-by: A E Lawrence <lawrence_a_e@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-30 00:51:52 +04:00
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter This adds NetGear Managed Switch M4100 series, M5300 series, M7100 series USB ID (0846:0110) to the cp210x driver. Without this, the serial adapter is not recognized in Linux. Description was obtained from an Netgear Eng. Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-02 06:56:25 +04:00
{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
USB: cp2101.c: add additional device ID This patch adds an additional device ID to the cp2101 USB serial driver. This device is a Gemalto Prox-PU or CU contactless card reader (ISO14443-A/B and Mifare). The reader is a standard Gemalto serial proximity reader using the Gemalto Block Protocol (see reader's documentation) bundled with a built-in CP2102 for serial/USB conversion. Signed-off-by: Edouard Lafargue (edouard@lafargue.name) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-25 12:15:36 +04:00
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
USB: cp210x: add ID for RUGGEDCOM USB Serial Console Added the USB serial console device ID for Siemens Ruggedcom devices which have a USB port for their serial console. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-21 23:24:27 +03:00
{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
USB: CP210x New Device IDs 11 New device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-15 16:36:38 +04:00
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
[PATCH] USB: CP2101 New Device IDs Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-28 12:51:15 +04:00
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
USB: New device ID for the CP2101 driver attached please find a new device ID for CP2101 driver. This device is a usb stick from Dynastream to communicate with ANT wireless devices which I suppose is fairly similar to the ANT dev board having product id 0x1003. From: Martin Kusserow <kusserow@ife.ee.ethz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-21 14:02:17 +03:00
{ USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
USB: CP2101 Add new device IDs Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-12 19:15:54 +04:00
{ USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
USB: add OWL CM-160 support to cp210x driver This adds support for the OWL CM-160 electricity monitor to the cp210x driver. Signed-off-by: Luis Llorente <luisllorente@luisllorente.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-31 16:37:05 +04:00
{ USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */
[PATCH] USB: CP2101 New Device IDs Three new device IDs for CP2101 USB to UART Bridge Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-08-28 12:51:15 +04:00
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
USB: Serial: Add support for Arkham Technology adapters As reported by David Potts from Arkham Technology, the current driver works with their hardware on addition of the device ids. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-06 15:19:59 +04:00
{ USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
{ USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
USB: CP2101 New Device IDs Six new device IDs for CP2101 driver. Cc: stable <stable@kernel.org> Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-03 15:45:59 +03:00
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
[PATCH] USB: cp2101: add new device IDs This patch adds a new device ID to the cp2101 driver Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-11 14:29:02 +03:00
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
USB: CP210x New Device IDs 11 New device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-15 16:36:38 +04:00
{ USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */
{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
USB: CP2101 New Device IDs Two new device IDs for CP2101 driver. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-20 17:37:17 +04:00
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+ usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin <damir@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-30 23:52:38 +03:00
{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
[PATCH] USB: new cp2101 device By the way I have to ask you to add new (vid,pid) pair to cp2101 driver. This device is argussoft's avr in-system programmer AS3M, http://atmel.argussoft.ru/hard.htm it's based on cp2101 chip and works pretty well with the linux driver. It could be used with argussoft's `asisp1109.exe' (http://atmel.argussoft.ru/download/software/as-tools.soft/asisp.zip) tool run under wine. Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-31 00:40:06 +04:00
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
USB: CP210x New Device IDs 11 New device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-15 16:36:38 +04:00
{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
USB: serial: cp210x: add Optris MS Pro usb id Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-01 12:28:55 +04:00
{ USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
USB: CP2101 New Device IDs Two new device IDs for CP2101 driver. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-20 17:37:17 +04:00
{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
USB: SERIAL CP2101 add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-05 00:28:21 +04:00
{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
USB: CP210x Add new device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 00:52:33 +04:00
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
USB: New device IDs for cp2101 driver Here are two new device IDs for the cp2101 driver. The diff is with linus's tree as of this evending. From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-01 01:04:33 +03:00
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
usb: serial: Add Rigblaster Advantage to device table The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin <sconklin@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-08 03:19:33 +04:00
{ USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
USB: cp210x: Add B&G H3000 link cable ID This is the cable between an H3000 navigation unit and a multi-function display. http://www.bandg.com/en/Products/H3000/Spares-and-Accessories/Cables/H3000-CPU-USB-Cable-Pack/ Signed-off-by: Jason Detring <jason.detring@navico.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-27 00:08:54 +04:00
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
USB: CP210x Add 10 Device IDs This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-27 02:20:04 +04:00
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
USB: CP210x New Device IDs 11 New device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-15 16:36:38 +04:00
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
USB: serial: new cp2101 device id From: Robert M. Kenney <rmk@unh.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-26 22:58:39 +03:00
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
usb-serial: Add ThinkOptics WavIT Add ThinkOptics WavIt to cp2101 device table Signed-off-by: Bernhard Beck <kernel@goodcoffee.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-11 20:23:13 +04:00
{ USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c Hi, below patch adds the USB-ID of the serial adapters sold by Multiplex RC (www.multiplex-rc.de). Signed-off-by: Malte Schröder <maltesch@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-05 23:34:40 +04:00
{ USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */
USB: CP2101 Add new device IDs Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-12 19:15:54 +04:00
{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
USB: CP210x New Device IDs 11 New device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-15 16:36:38 +04:00
{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
USB: new VID/PID-combos for cp2101 3 new VID/PID combinations (registered with Silicon Laboratories Inc.) added for devices made by Lipowsky Industrie Elektronik GmbH all using the CP2102 usb-to-serial converter (Baby-JTAG, Baby-LIN, HARP-1). Signed-off-by: Bjorn Schneider <schneider@lipowsky.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-28 14:42:04 +04:00
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
USB: cp210x: add ID for IAI USB to RS485 adaptor Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-01-08 14:34:41 +03:00
{ USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
USB: new VID/PID-combos for cp2101 3 new VID/PID combinations (registered with Silicon Laboratories Inc.) added for devices made by Lipowsky Industrie Elektronik GmbH all using the CP2102 usb-to-serial converter (Baby-JTAG, Baby-LIN, HARP-1). Signed-off-by: Bjorn Schneider <schneider@lipowsky.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-28 14:42:04 +04:00
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
USB: cp2101: new device id This adds a device ID for the Aerocomm Radio Modem, which uses the cp2102. I'm sure changing num_bulk_in/num_bulk_out to NUM_DONT_CARE is the wrong fix, but this is the only device I have with a cp2102, so I have no idea what a good global value would be, if there is one. Zero didn't work with this device. From: Jeff Long <JeffLong@mitre.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 19:02:09 +03:00
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
USB: cp210x: Add 81E8 (Zephyr Bioharness) As reported in http://bugzilla.kernel.org/show_bug.cgi?id=10980 Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-08 13:10:44 +03:00
{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
USB: new VID/PID-combos for cp2101 3 new VID/PID combinations (registered with Silicon Laboratories Inc.) added for devices made by Lipowsky Industrie Elektronik GmbH all using the CP2102 usb-to-serial converter (Baby-JTAG, Baby-LIN, HARP-1). Signed-off-by: Bjorn Schneider <schneider@lipowsky.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-28 14:42:04 +04:00
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
USB: cp2101 device My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider, PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c From: Tomasz K <eros81@o2.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-04 14:47:11 +03:00
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 05:57:33 +04:00
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
USB: cp210x: Add 8281 (Nanotec Plug & Drive) Signed-off-by: Tristan Bruns <tristan@tristanbruns.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-14 01:57:16 +04:00
{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
USB: cp210x: fix typo, Telegesys should have been Telegesis CC: David Chalmers <david.chalmers@telegesis.com> Reported-by: Xavier Carcelle <xavier.carcelle@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-10 13:17:33 +04:00
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
USB: SERIAL CP2101 add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-05 00:28:21 +04:00
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
USB: CP210x Add new device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 00:52:33 +04:00
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
USB: CP2101 Add device ID for AMB2560 This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-09 23:17:54 +03:00
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
USB: CP210x Add two device IDs Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and DekTec DTA Plus VHF/UHF Booster/Attenuator. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-03 00:51:46 +03:00
{ USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */
USB: CP210x Add new device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-07-13 00:52:33 +04:00
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
USB: CP210x Add two device IDs Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and DekTec DTA Plus VHF/UHF Booster/Attenuator. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-03 00:51:46 +03:00
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
USB: CP2101 New Device ID One new device ID for CP2101 driver. Signed-off-by: Alex Stephens alex@miranova.com
2009-03-17 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
USB: CP210x Add new device ID New device ID added for Balluff RFID reader. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23 23:50:57 +04:00
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
USB: CP210x Add 4 Device IDs for AC-Services Devices This patch adds 4 device IDs for CP2102 based devices manufactured by AC-Services. See http://www.ac-services.eu for further info. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-20 16:51:13 +03:00
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
USB: cp210x: add Virtenio Preon32 device id Cc: stable <stable@vger.kernel.org> Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-22 12:41:23 +04:00
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
USB: CP210x Add 4 Device IDs for AC-Services Devices This patch adds 4 device IDs for CP2102 based devices manufactured by AC-Services. See http://www.ac-services.eu for further info. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-20 16:51:13 +03:00
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
USB: cp210x: add IDs for CEL USB sticks and MeshWorks devices Added virtual com port VID/PID entries for CEL USB sticks and MeshWorks devices. Signed-off-by: David Peterson <david.peterson@cel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-06 18:00:52 +03:00
{ USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */
{ USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */
USB: cp210x: add MMB and PI ZigBee USB Device Support Added support for MMB Networks and Planet Innovation Ingeni ZigBee USB devices using customized Silicon Labs' CP210x.c USB to UART bridge drivers with PIDs: 88A4, 88A5. Signed-off-by: Sami Rahman <sami.rahman@mmbresearch.com> Tested-by: Sami Rahman <sami.rahman@mmbresearch.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-08 22:28:55 +04:00
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
USB: serial: cp210x: added Ketra N1 wireless interface support Added support for Ketra N1 wireless interface, which uses the Silicon Labs' CP2104 USB to UART bridge with customized PID 8946. Signed-off-by: Joe Savage <joe.savage@goketra.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-20 17:01:16 +04:00
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
USB: cp210x: add IDs for CEL USB sticks and MeshWorks devices Added virtual com port VID/PID entries for CEL USB sticks and MeshWorks devices. Signed-off-by: David Peterson <david.peterson@cel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-01-06 18:00:52 +03:00
{ USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
USB: cp210x: add ID for KCF Technologies PRN device Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by: Mark Edwards <sonofaforester@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-04-14 15:52:34 +03:00
{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle Added the USB serial device ID for the HubZ dual ZigBee and Z-Wave radio dongle. Signed-off-by: John D. Blair <johnb@candicontrols.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-06-04 23:18:19 +03:00
{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
[PATCH] USB: cp2101 Add new device IDs The attached patch adds four new device IDs for the CP2101 driver. Also 3 tab characters have been removed from device ID table. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-20 03:06:19 +03:00
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
USB-SERIAL:cp2101 Add new device ID This patch adds device ID 0xEA61. This is another factory default ID used by SILabs. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-13 01:09:56 +04:00
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
USB: CP210x New Device IDs 11 New device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-15 16:36:38 +04:00
{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
USB: CP2101 New Device IDs Six new device IDs for CP2101 driver. Cc: stable <stable@kernel.org> Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-03 15:45:59 +03:00
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
{ USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
{ USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
USB: another id for cp2101 driver This patch adds another usb id to the cp2101. It seems to work well. Please apply, thanks. Signed-off-by: Pozsar Balazs <pozsy@uhulinux.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 14:47:49 +03:00
{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
Add Baltech Reader ID to CP2101 driver this patch adds the Baltech Reader ID to the list of USB IDs in the CP2101 driver. From: Johannes Hoelzl <johannes.hoelzl@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-02 18:54:27 +03:00
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
USB: CP210X Add device IDs Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:52:31 +04:00
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
USB: CP210x Add 10 Device IDs This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-27 02:20:04 +04:00
{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
{ USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */
USB: CP2101 New Device IDs Six new device IDs for CP2101 driver. Cc: stable <stable@kernel.org> Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-03 15:45:59 +03:00
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
USB: CP210x Add 10 Device IDs This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-27 02:20:04 +04:00
{ USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */
{ USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */
{ USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */
{ USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */
USB: serial: cp210x: Adding Seletek device id's These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by: Michiel van de Garde <mgparser@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-27 04:08:29 +03:00
{ USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */
{ USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */
[PATCH] USB: cp2101.c: Jablotron usb serial interface identification Jablotron usb serial interface identification Signed-off-by: Josef Balatka <balatka@email.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-17 20:47:24 +03:00
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
USB: cp210x: Add four new device IDs Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-28 01:05:14 +04:00
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
USB: Added Kamstrup VID/PIDs to cp210x serial driver. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-22 02:41:37 +04:00
{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
USB: CP210x Add new device ID New device ID added for Balluff RFID reader. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23 23:50:57 +04:00
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
USB: cp210x: add ID for ELV Marble Sound Board 1 Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-12-28 20:37:38 +03:00
{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
USB: cp210x: add IDs for GE B650V3 and B850V3 boards Add USB ID for cp2104/5 devices on GE B650v3 and B850v3 boards. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-01 22:57:25 +03:00
{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
USB: serial: cp210x: Adding GE Healthcare Device ID The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-03-29 19:47:29 +03:00
{ USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder. Signed-off-by: Vittorio Alfieri <vittorio88@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-28 16:40:24 +03:00
{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
usb: cp210x support SEL C662 Vendor/Device This patch adds support for the Schweitzer Engineering Laboratories C662 USB cable based off the CP210x driver. Signed-off-by: Barry Grussling <barry@grussling.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-20 01:46:12 +04:00
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
USB: cp210x: add support for Corsair usb dongle Corsair USB Dongles are shipped with Corsair AXi series PSUs. These are cp210x serial usb devices, so make driver detect these. I have a program, that can get information from these PSUs. Tested with 2 different dongles shipped with Corsair AX860i and AX1200i units. Signed-off-by: Andras Kovacs <andras@sth.sze.hu> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-06-27 16:50:11 +04:00
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
USB: serial: cp210x: add Silicon Labs 358x VID and PID Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now connect to host PCs over a USB serial link. Signed-off-by: Nathaniel Ting <nathaniel.ting@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-10-03 20:01:20 +04:00
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
USB: cp210x: Add WAGO 750-923 Service Cable device ID The WAGO 750-923 USB Service Cable is used for configuration and firmware updates of several industrial automation products from WAGO Kontakttechnik GmbH. Bus 004 Device 002: ID 1be3:07a6 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1be3 idProduct 0x07a6 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 WAGO USB Service Cable iSerial 3 1277796751 . . . Signed-off-by: Anders Larsen <al@alarsen.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-07 01:46:25 +04:00
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
USB: cp210x: add support for Seluxit USB dongle Added the Seluxit ApS USB Serial Dongle to cp210x driver. Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-22 11:50:43 +04:00
{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
USB: CP210x Add 10 Device IDs This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-27 02:20:04 +04:00
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
usb: cp210x new Vendor/Device IDs This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-09 13:57:32 +04:00
{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
{ USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
{ USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
{ USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
{ USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
{ USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
{ USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
{ USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
{ USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
{ USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
{ USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
{ USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
{ USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
{ USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
{ USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
USB: cp210x: add ID for Aruba Networks controllers Add the USB serial console device ID for Aruba Networks 7xxx series controllers which have a USB port for their serial console. Signed-off-by: Peter Sanford <peter@sanford.io> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-06-26 03:40:05 +03:00
{ USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */
USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19 This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR, using a Silabs CP2103 USB to UART Bridge. Signed-off-by: Renato Caldas <rmsc@fe.up.pt> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 19:20:51 +04:00
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
USB: CP210x Add 10 Device IDs This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-27 02:20:04 +04:00
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
USB: CP210x Add new device ID New device ID added for Balluff RFID reader. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23 23:50:57 +04:00
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
{ } /* Terminating Entry */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
};
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
MODULE_DEVICE_TABLE(usb, id_table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
struct cp210x_port_private {
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
__u8 bInterfaceNumber;
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
bool has_swapped_line_ctl;
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
};
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static struct usb_serial_driver cp210x_device = {
[PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 08:15:16 +04:00
.driver = {
.owner = THIS_MODULE,
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
.name = "cp210x",
[PATCH] USB Serial: get rid of the .owner field in usb_serial_driver Don't duplicate something that's already in struct driver. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 08:15:16 +04:00
},
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
.id_table = id_table,
.num_ports = 1,
USB: cp210x: increase bulk-in buffer size to 256 byte The cp210x requires a bulk-in buffer larger than endpoint size to keep up at high baudrates without loosing data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-18 01:00:39 +03:00
.bulk_in_size = 256,
USB: cp210x: increase the bulk-out buffer size to 256 byte Increase the bulk-out buffer size from 64 to 256 byte. This gives a significant increase in throughput already at 1Mbaud (e.g. 710 instead of 640 KB/s) as well as lowered CPU usage. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-18 01:00:38 +03:00
.bulk_out_size = 256,
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
.open = cp210x_open,
.close = cp210x_close,
.break_ctl = cp210x_break_ctl,
.set_termios = cp210x_set_termios,
USB: cp210x: add tx_empty() Added tx_empty callback needed for generic wait-until-sent support. Without this function, when the port is closed usbserial can't know that there are still data in the chip's transmit FIFO. The chip gets disabled and untransmitted data lost. When the actual byte count is reported by tx-empty the close can be delayed until all data are sent. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: modify tx_empty error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-25 01:28:41 +03:00
.tx_empty = cp210x_tx_empty,
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
.tiocmget = cp210x_tiocmget,
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
.tiocmset = cp210x_tiocmset,
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
.port_probe = cp210x_port_probe,
.port_remove = cp210x_port_remove,
USB: serial: handle Data Carrier Detect changes Alan's commit 335f8514f200e63d689113d29cb7253a5c282967 introduced .carrier_raised function in several drivers. That also means tty_port_block_til_ready can now suspend the process trying to open the serial port when Carrier Detect is low and put it into tty_port.open_wait queue. We need to wake up the process when Carrier Detect goes high and trigger TTY hangup when CD goes low. Some of the devices do not report modem status line changes, or at least we don't understand the status message, so for those we remove .carrier_raised again. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-14 16:30:21 +03:00
.dtr_rts = cp210x_dtr_rts
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
};
usb-serial: use new registration API in [a-c]* drivers This patch (as1523) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: aircable, ark3116, belkin_sa, ch341, cp210x, cyberjack, and cypress_m8. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-23 23:56:17 +04:00
static struct usb_serial_driver * const serial_drivers[] = {
&cp210x_device, NULL
};
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/* Config request types */
usb: cp210x: Corrected USB request type definitions The original request types in the cp210x driver are labled as "DEVICE_TO_HOST" and "HOST_TO_DEVICE" but the actual bit definition corresponds to a request to the interface. This has been corrected, and the actual definition for the device requests have been added. Signed-off-by: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 08:06:48 +04:00
#define REQTYPE_HOST_TO_INTERFACE 0x41
#define REQTYPE_INTERFACE_TO_HOST 0xc1
#define REQTYPE_HOST_TO_DEVICE 0x40
#define REQTYPE_DEVICE_TO_HOST 0xc0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:53:30 +04:00
/* Config request codes */
#define CP210X_IFC_ENABLE 0x00
#define CP210X_SET_BAUDDIV 0x01
#define CP210X_GET_BAUDDIV 0x02
#define CP210X_SET_LINE_CTL 0x03
#define CP210X_GET_LINE_CTL 0x04
#define CP210X_SET_BREAK 0x05
#define CP210X_IMM_CHAR 0x06
#define CP210X_SET_MHS 0x07
#define CP210X_GET_MDMSTS 0x08
#define CP210X_SET_XON 0x09
#define CP210X_SET_XOFF 0x0A
#define CP210X_SET_EVENTMASK 0x0B
#define CP210X_GET_EVENTMASK 0x0C
#define CP210X_SET_CHAR 0x0D
#define CP210X_GET_CHARS 0x0E
#define CP210X_GET_PROPS 0x0F
#define CP210X_GET_COMM_STATUS 0x10
#define CP210X_RESET 0x11
#define CP210X_PURGE 0x12
#define CP210X_SET_FLOW 0x13
#define CP210X_GET_FLOW 0x14
#define CP210X_EMBED_EVENTS 0x15
#define CP210X_GET_EVENTSTATE 0x16
#define CP210X_SET_CHARS 0x19
USB: cp210x: fix CP2104 baudrate usage This fix changes the way baudrates are set on the CP210x devices from Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV command, and GET/SET_BAUDRATE command, while CP2104 and higher devices only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in kernel version 3.2.0 only implements the GET/SET_BAUDDIV command. This patch implements the two new codes for the GET/SET_BAUDRATE commands. Then there is a change in the way that the baudrate is assigned or retrieved. This is done according to the CP210x USB specification in AN571. This document can be found here: http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart Sections 5.3/5.4 describe the USB packets for the old baudrate method. Sections 5.5/5.6 describe the USB packets for the new method. This patch also implements the new request scheme, and eliminates the unnecessary baudrate calculations since it uses the "actual baudrate" method. This patch solves the problem reported for the CP2104 in bug 42586, and also keeps support for all other devices (CP2101/2/3). This patchfile is also attached to the bug report on bugzilla.kernel.org. This patch has been developed and test on the 3.2.0 mainline kernel version under Ubuntu 10.11. Signed-off-by: Preston Fick <preston.fick@silabs.com> [duplicate patch also sent by Johan - gregkh] Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-17 04:14:09 +04:00
#define CP210X_GET_BAUDRATE 0x1D
#define CP210X_SET_BAUDRATE 0x1E
USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:53:30 +04:00
/* CP210X_IFC_ENABLE */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:53:30 +04:00
/* CP210X_(SET|GET)_BAUDDIV */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define BAUD_RATE_GEN_FREQ 0x384000
USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:53:30 +04:00
/* CP210X_(SET|GET)_LINE_CTL */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define BITS_DATA_MASK 0X0f00
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
#define BITS_DATA_5 0X0500
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#define BITS_DATA_6 0X0600
#define BITS_DATA_7 0X0700
#define BITS_DATA_8 0X0800
#define BITS_DATA_9 0X0900
#define BITS_PARITY_MASK 0x00f0
#define BITS_PARITY_NONE 0x0000
#define BITS_PARITY_ODD 0x0010
#define BITS_PARITY_EVEN 0x0020
#define BITS_PARITY_MARK 0x0030
#define BITS_PARITY_SPACE 0x0040
#define BITS_STOP_MASK 0x000f
#define BITS_STOP_1 0x0000
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:53:30 +04:00
/* CP210X_SET_BREAK */
USB: CP210x Fix Break On/Off The definitions for BREAK_ON and BREAK_OFF are inverted, causing break requests to fail. This patch sets BREAK_ON and BREAK_OFF to the correct values. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-19 01:13:39 +04:00
#define BREAK_ON 0x0001
#define BREAK_OFF 0x0000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: CP210X Use official request code definitions The CP210X driver was developed without official device specifications. This has lead to an incorrect assumption that all GET request codes are equal to the corresponding SET request code +1. This patch removes this incorrect assumption, and uses request code definitions based on the updated GPL driver from SiLabs. This modification is needed before extended functionality such as GPIO on CP2103 can be supported. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:53:30 +04:00
/* CP210X_(SET_MHS|GET_MDMSTS) */
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
#define CONTROL_DTR 0x0001
#define CONTROL_RTS 0x0002
#define CONTROL_CTS 0x0010
#define CONTROL_DSR 0x0020
#define CONTROL_RING 0x0040
#define CONTROL_DCD 0x0080
#define CONTROL_WRITE_DTR 0x0100
#define CONTROL_WRITE_RTS 0x0200
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: cp210x: add tx_empty() Added tx_empty callback needed for generic wait-until-sent support. Without this function, when the port is closed usbserial can't know that there are still data in the chip's transmit FIFO. The chip gets disabled and untransmitted data lost. When the actual byte count is reported by tx-empty the close can be delayed until all data are sent. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: modify tx_empty error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-25 01:28:41 +03:00
/* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
struct cp210x_comm_status {
__le32 ulErrors;
__le32 ulHoldReasons;
__le32 ulAmountInInQueue;
__le32 ulAmountInOutQueue;
u8 bEofReceived;
u8 bWaitForImmediate;
u8 bReserved;
} __packed;
USB: cp210x: flush device queues at close Flush all device queues at close in order to work around a cp2108 Tx queue bug. Occasionally, writing data and immediately closing the port makes cp2108 stop responding. The device has to be unplugged to clear the error. The failure is induced by shutting down the device while its Tx queue still has unsent data. This condition is avoided by issuing PURGE command from the close() callback. This change is applied to all cp210x devices. Clearing internal queues on close is generally good. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:03 +03:00
/*
* CP210X_PURGE - 16 bits passed in wValue of USB request.
* SiLabs app note AN571 gives a strange description of the 4 bits:
* bit 0 or bit 2 clears the transmit queue and 1 or 3 receive.
* writing 1 to all, however, purges cp2108 well enough to avoid the hang.
*/
#define PURGE_ALL 0x000f
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
/* CP210X_GET_FLOW/CP210X_SET_FLOW read/write these 0x10 bytes */
struct cp210x_flow_ctl {
__le32 ulControlHandshake;
__le32 ulFlowReplace;
__le32 ulXonLimit;
__le32 ulXoffLimit;
} __packed;
/* cp210x_flow_ctl::ulControlHandshake */
#define CP210X_SERIAL_DTR_MASK GENMASK(1, 0)
#define CP210X_SERIAL_DTR_SHIFT(_mode) (_mode)
#define CP210X_SERIAL_CTS_HANDSHAKE BIT(3)
#define CP210X_SERIAL_DSR_HANDSHAKE BIT(4)
#define CP210X_SERIAL_DCD_HANDSHAKE BIT(5)
#define CP210X_SERIAL_DSR_SENSITIVITY BIT(6)
/* values for cp210x_flow_ctl::ulControlHandshake::CP210X_SERIAL_DTR_MASK */
#define CP210X_SERIAL_DTR_INACTIVE 0
#define CP210X_SERIAL_DTR_ACTIVE 1
#define CP210X_SERIAL_DTR_FLOW_CTL 2
/* cp210x_flow_ctl::ulFlowReplace */
#define CP210X_SERIAL_AUTO_TRANSMIT BIT(0)
#define CP210X_SERIAL_AUTO_RECEIVE BIT(1)
#define CP210X_SERIAL_ERROR_CHAR BIT(2)
#define CP210X_SERIAL_NULL_STRIPPING BIT(3)
#define CP210X_SERIAL_BREAK_CHAR BIT(4)
#define CP210X_SERIAL_RTS_MASK GENMASK(7, 6)
#define CP210X_SERIAL_RTS_SHIFT(_mode) (_mode << 6)
#define CP210X_SERIAL_XOFF_CONTINUE BIT(31)
/* values for cp210x_flow_ctl::ulFlowReplace::CP210X_SERIAL_RTS_MASK */
#define CP210X_SERIAL_RTS_INACTIVE 0
#define CP210X_SERIAL_RTS_ACTIVE 1
#define CP210X_SERIAL_RTS_FLOW_CTL 2
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/*
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
* Reads a variable-sized block of CP210X_ registers, identified by req.
* Returns data into buf in native USB byte order.
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
*/
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
void *buf, int bufsize)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
struct usb_serial *serial = port->serial;
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
void *dmabuf;
int result;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
dmabuf = kmalloc(bufsize, GFP_KERNEL);
if (!dmabuf) {
/*
* FIXME Some callers don't bother to check for error,
* at least give them consistent junk until they are fixed
*/
memset(buf, 0, bufsize);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
return -ENOMEM;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
req, REQTYPE_INTERFACE_TO_HOST, 0,
port_priv->bInterfaceNumber, dmabuf, bufsize,
USB_CTRL_SET_TIMEOUT);
if (result == bufsize) {
memcpy(buf, dmabuf, bufsize);
result = 0;
} else {
dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
req, bufsize, result);
if (result >= 0)
result = -EPROTO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
/*
* FIXME Some callers don't bother to check for error,
* at least give them consistent junk until they are fixed
*/
memset(buf, 0, bufsize);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
kfree(dmabuf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
return result;
}
USB: cp210x: forward USB errors to USB serial core Make sure we forward all error codes (e.g. ENOMEM) to USB serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-10 17:58:29 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
/*
* Reads any 32-bit CP210X_ register identified by req.
*/
static int cp210x_read_u32_reg(struct usb_serial_port *port, u8 req, u32 *val)
{
__le32 le32_val;
int err;
err = cp210x_read_reg_block(port, req, &le32_val, sizeof(le32_val));
if (err) {
/*
* FIXME Some callers don't bother to check for error,
* at least give them consistent junk until they are fixed
*/
*val = 0;
return err;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
*val = le32_to_cpu(le32_val);
return 0;
}
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
/*
* Reads any 16-bit CP210X_ register identified by req.
*/
static int cp210x_read_u16_reg(struct usb_serial_port *port, u8 req, u16 *val)
{
__le16 le16_val;
int err;
err = cp210x_read_reg_block(port, req, &le16_val, sizeof(le16_val));
if (err)
return err;
*val = le16_to_cpu(le16_val);
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/*
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
* Reads any 8-bit CP210X_ register identified by req.
*/
static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
{
return cp210x_read_reg_block(port, req, val, sizeof(*val));
}
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
/*
* Writes any 16-bit CP210X_ register (req) whose value is passed
* entirely in the wValue field of the USB request.
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
*/
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
static int cp210x_write_u16_reg(struct usb_serial_port *port, u8 req, u16 val)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
struct usb_serial *serial = port->serial;
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
int result;
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
req, REQTYPE_HOST_TO_INTERFACE, val,
port_priv->bInterfaceNumber, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (result < 0) {
dev_err(&port->dev, "failed set request 0x%x status: %d\n",
req, result);
}
return result;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
/*
* Writes a variable-sized block of CP210X_ registers, identified by req.
* Data in buf must be in native USB byte order.
*/
static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
void *buf, int bufsize)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
void *dmabuf;
int result;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
dmabuf = kmalloc(bufsize, GFP_KERNEL);
if (!dmabuf)
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
return -ENOMEM;
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
memcpy(dmabuf, buf, bufsize);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
req, REQTYPE_HOST_TO_INTERFACE, 0,
port_priv->bInterfaceNumber, dmabuf, bufsize,
USB_CTRL_SET_TIMEOUT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
kfree(dmabuf);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
if (result == bufsize) {
result = 0;
} else {
dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
req, bufsize, result);
if (result >= 0)
USB: cp210x: forward USB errors to USB serial core Make sure we forward all error codes (e.g. ENOMEM) to USB serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-10 17:58:29 +04:00
result = -EPROTO;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
return result;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/*
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
* Writes any 32-bit CP210X_ register identified by req.
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
*/
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
{
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
__le32 le32_val;
le32_val = cpu_to_le32(val);
return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
/*
* Detect CP2108 GET_LINE_CTL bug and activate workaround.
* Write a known good value 0x800, read it back.
* If it comes back swapped the bug is detected.
* Preserve the original register value.
*/
static int cp210x_detect_swapped_line_ctl(struct usb_serial_port *port)
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
u16 line_ctl_save;
u16 line_ctl_test;
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
int err;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_save);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
if (err)
return err;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
err = cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, 0x800);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
if (err)
return err;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, &line_ctl_test);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
if (err)
return err;
if (line_ctl_test == 8) {
port_priv->has_swapped_line_ctl = true;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
line_ctl_save = swab16(line_ctl_save);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
}
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
return cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, line_ctl_save);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
}
/*
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
* Must always be called instead of cp210x_read_u16_reg(CP210X_GET_LINE_CTL)
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
* to workaround cp2108 bug and get correct value.
*/
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
static int cp210x_get_line_ctl(struct usb_serial_port *port, u16 *ctl)
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
{
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
int err;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
err = cp210x_read_u16_reg(port, CP210X_GET_LINE_CTL, ctl);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
if (err)
return err;
/* Workaround swapped bytes in 16-bit value from CP210X_GET_LINE_CTL */
if (port_priv->has_swapped_line_ctl)
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
*ctl = swab16(*ctl);
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
return 0;
}
USB: CP2101 Support AN205 baud rates This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 01:19:22 +03:00
/*
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
* cp210x_quantise_baudrate
USB: CP2101 Support AN205 baud rates This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 01:19:22 +03:00
* Quantises the baud rate as per AN205 Table 1
*/
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
static unsigned int cp210x_quantise_baudrate(unsigned int baud)
{
USB: cp210x: do not map baud rates to B0 We do not implement B0 hangup yet so map low baudrates to 300bps. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:50 +04:00
if (baud <= 300)
baud = 300;
USB: CP2101 Support AN205 baud rates This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 01:19:22 +03:00
else if (baud <= 600) baud = 600;
else if (baud <= 1200) baud = 1200;
else if (baud <= 1800) baud = 1800;
else if (baud <= 2400) baud = 2400;
else if (baud <= 4000) baud = 4000;
else if (baud <= 4803) baud = 4800;
else if (baud <= 7207) baud = 7200;
else if (baud <= 9612) baud = 9600;
else if (baud <= 14428) baud = 14400;
else if (baud <= 16062) baud = 16000;
else if (baud <= 19250) baud = 19200;
else if (baud <= 28912) baud = 28800;
else if (baud <= 38601) baud = 38400;
else if (baud <= 51558) baud = 51200;
else if (baud <= 56280) baud = 56000;
else if (baud <= 58053) baud = 57600;
else if (baud <= 64111) baud = 64000;
else if (baud <= 77608) baud = 76800;
else if (baud <= 117028) baud = 115200;
else if (baud <= 129347) baud = 128000;
else if (baud <= 156868) baud = 153600;
else if (baud <= 237832) baud = 230400;
else if (baud <= 254234) baud = 250000;
else if (baud <= 273066) baud = 256000;
else if (baud <= 491520) baud = 460800;
else if (baud <= 567138) baud = 500000;
else if (baud <= 670254) baud = 576000;
USB: cp210x: allow more baud rates above 1Mbaud Allow more baud rates to be set in [1M,2M] baud. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:53 +04:00
else if (baud < 1000000)
baud = 921600;
else if (baud > 2000000)
baud = 2000000;
USB: CP2101 Support AN205 baud rates This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-27 01:19:22 +03:00
return baud;
}
tty: USB does not need the filp argument in the drivers And indeed none of them use it. Clean this up as it will make moving to a standard open method rather easier. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-20 00:13:26 +04:00
static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
int result;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
result = cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_ENABLE);
USB: cp210x: forward USB errors to USB serial core Make sure we forward all error codes (e.g. ENOMEM) to USB serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-10 17:58:29 +04:00
if (result) {
dev_err(&port->dev, "%s - Unable to enable UART\n", __func__);
return result;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/* Configure the termios structure */
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
cp210x_get_termios(tty, port);
USB: cp210x: call generic open last in open Make sure port is fully initialised before calling generic open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:48 +04:00
USB: cp210x: initialise baud rate at open The newer cp2104 devices require the baud rate to be initialised after power on. Make sure it is set when port is opened. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:52 +04:00
/* The baud rate must be initialised on cp2104 */
if (tty)
cp210x_change_speed(tty, port, NULL);
USB: cp210x: call generic open last in open Make sure port is fully initialised before calling generic open. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:48 +04:00
return usb_serial_generic_open(tty, port);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_close(struct usb_serial_port *port)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
USB: serial: refactor generic close Export usb_serial_generic_close so that drivers can easily kill the read and write urb and make sure that the write fifo is reset. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-18 01:00:45 +03:00
usb_serial_generic_close(port);
USB: cp210x: flush device queues at close Flush all device queues at close in order to work around a cp2108 Tx queue bug. Occasionally, writing data and immediately closing the port makes cp2108 stop responding. The device has to be unplugged to clear the error. The failure is induced by shutting down the device while its Tx queue still has unsent data. This condition is avoided by issuing PURGE command from the close() callback. This change is applied to all cp210x devices. Clearing internal queues on close is generally good. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:03 +03:00
/* Clear both queues; cp2108 needs this to avoid an occasional hang */
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_PURGE, PURGE_ALL);
USB: cp210x: flush device queues at close Flush all device queues at close in order to work around a cp2108 Tx queue bug. Occasionally, writing data and immediately closing the port makes cp2108 stop responding. The device has to be unplugged to clear the error. The failure is induced by shutting down the device while its Tx queue still has unsent data. This condition is avoided by issuing PURGE command from the close() callback. This change is applied to all cp210x devices. Clearing internal queues on close is generally good. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:03 +03:00
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_IFC_ENABLE, UART_DISABLE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: cp210x: add tx_empty() Added tx_empty callback needed for generic wait-until-sent support. Without this function, when the port is closed usbserial can't know that there are still data in the chip's transmit FIFO. The chip gets disabled and untransmitted data lost. When the actual byte count is reported by tx-empty the close can be delayed until all data are sent. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: modify tx_empty error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-11-25 01:28:41 +03:00
/*
* Read how many bytes are waiting in the TX queue.
*/
static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
u32 *count)
{
struct usb_serial *serial = port->serial;
struct cp210x_port_private *port_priv = usb_get_serial_port_data(port);
struct cp210x_comm_status *sts;
int result;
sts = kmalloc(sizeof(*sts), GFP_KERNEL);
if (!sts)
return -ENOMEM;
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
CP210X_GET_COMM_STATUS, REQTYPE_INTERFACE_TO_HOST,
0, port_priv->bInterfaceNumber, sts, sizeof(*sts),
USB_CTRL_GET_TIMEOUT);
if (result == sizeof(*sts)) {
*count = le32_to_cpu(sts->ulAmountInOutQueue);
result = 0;
} else {
dev_err(&port->dev, "failed to get comm status: %d\n", result);
if (result >= 0)
result = -EPROTO;
}
kfree(sts);
return result;
}
static bool cp210x_tx_empty(struct usb_serial_port *port)
{
int err;
u32 count;
err = cp210x_get_tx_queue_byte_count(port, &count);
if (err)
return true;
return !count;
}
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/*
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
* cp210x_get_termios
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
* Reads the baud rate, data bits, parity, stop bits and flow control mode
* from the device, corrects any unsupported values, and configures the
* termios structure to reflect the state of the device
*/
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_get_termios(struct tty_struct *tty,
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
struct usb_serial_port *port)
{
unsigned int baud;
if (tty) {
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
cp210x_get_termios_port(tty->driver_data,
tty: move the termios object into the tty This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-14 18:31:47 +04:00
&tty->termios.c_cflag, &baud);
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
tty_encode_baud_rate(tty, baud, baud);
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
} else {
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
unsigned int cflag;
cflag = 0;
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
cp210x_get_termios_port(port, &cflag, &baud);
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
}
}
/*
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
* cp210x_get_termios_port
* This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
*/
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_get_termios_port(struct usb_serial_port *port,
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
unsigned int *cflagp, unsigned int *baudp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
struct device *dev = &port->dev;
USB: serial: cp210x: add new access functions for large registers cp210x_get_config and cp210x_set_config are cumbersome to use. This change switches large register access to use new block functions. The old functions are removed because now they become unused. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: minor style change ] Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:56 +03:00
unsigned int cflag;
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
struct cp210x_flow_ctl flow_ctl;
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
u32 baud;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
u16 bits;
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
u32 ctl_hs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
*baudp = baud;
USB: cp2101: convert to new termios - Convert to new baud rate functions - Add baud rate reporting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 12:24:24 +04:00
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
cflag = *cflagp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
cp210x_get_line_ctl(port, &bits);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
cflag &= ~CSIZE;
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
switch (bits & BITS_DATA_MASK) {
case BITS_DATA_5:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 5\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CS5;
break;
case BITS_DATA_6:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 6\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CS6;
break;
case BITS_DATA_7:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 7\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CS7;
break;
case BITS_DATA_8:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 8\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CS8;
break;
case BITS_DATA_9:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
default:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
switch (bits & BITS_PARITY_MASK) {
case BITS_PARITY_NONE:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - parity = NONE\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag &= ~PARENB;
break;
case BITS_PARITY_ODD:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - parity = ODD\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= (PARENB|PARODD);
break;
case BITS_PARITY_EVEN:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - parity = EVEN\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag &= ~PARODD;
cflag |= PARENB;
break;
case BITS_PARITY_MARK:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - parity = MARK\n", __func__);
USB: serial: cp210x.c: add mark/space parity Add mark and space parity support. Signed-off-by: Roland Koebler <r.koebler@yahoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-09 22:37:08 +04:00
cflag |= (PARENB|PARODD|CMSPAR);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
case BITS_PARITY_SPACE:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - parity = SPACE\n", __func__);
USB: serial: cp210x.c: add mark/space parity Add mark and space parity support. Signed-off-by: Roland Koebler <r.koebler@yahoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-09 22:37:08 +04:00
cflag &= ~PARODD;
cflag |= (PARENB|CMSPAR);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
default:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
cflag &= ~CSTOPB;
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
switch (bits & BITS_STOP_MASK) {
case BITS_STOP_1:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - stop bits = 1\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
case BITS_STOP_1_5:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
bits &= ~BITS_STOP_MASK;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
case BITS_STOP_2:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - stop bits = 2\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
cflag |= CSTOPB;
break;
default:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
bits &= ~BITS_STOP_MASK;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
sizeof(flow_ctl));
ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
if (ctl_hs & CP210X_SERIAL_CTS_HANDSHAKE) {
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
cflag |= CRTSCTS;
} else {
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - flow control = NONE\n", __func__);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
cflag &= ~CRTSCTS;
}
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
*cflagp = cflag;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
/*
* CP2101 supports the following baud rates:
*
* 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800,
* 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600
*
* CP2102 and CP2103 support the following additional rates:
*
* 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000,
* 576000
*
* The device will map a requested rate to a supported one, but the result
* of requests for rates greater than 1053257 is undefined (see AN205).
*
* CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud,
* respectively, with an error less than 1%. The actual rates are determined
* by
*
* div = round(freq / (2 x prescale x request))
* actual = freq / (2 x prescale x div)
*
* For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps
* or 1 otherwise.
* For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1
* otherwise.
*/
static void cp210x_change_speed(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
u32 baud;
tty: move the termios object into the tty This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-14 18:31:47 +04:00
baud = tty->termios.c_ospeed;
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
USB: cp210x: allow more baud rates above 1Mbaud Allow more baud rates to be set in [1M,2M] baud. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:53 +04:00
/* This maps the requested rate to a rate valid on cp2102 or cp2103,
* or to an arbitrary rate in [1M,2M].
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
*
* NOTE: B0 is not implemented.
*/
baud = cp210x_quantise_baudrate(baud);
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
if (old_termios)
baud = old_termios->c_ospeed;
else
baud = 9600;
}
tty_encode_baud_rate(tty, baud, baud);
}
USB: CP210X Replace CP2101 with CP210x This patch replaces the string "CP2101" with "CP210x" within cp210x.c This is to reduce confusion about the fact that the driver is actually compatible with CP2101, CP2102 and CP2103 devices. Signed-off-by: Craig Shelley <craig@microtron.org.uk> (Fixed some collisions merging) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 16:54:40 +04:00
static void cp210x_set_termios(struct tty_struct *tty,
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:09:07 +04:00
struct usb_serial_port *port, struct ktermios *old_termios)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
struct device *dev = &port->dev;
USB: cp2101: convert to new termios - Convert to new baud rate functions - Add baud rate reporting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-18 12:24:24 +04:00
unsigned int cflag, old_cflag;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
u16 bits;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
tty: move the termios object into the tty This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-14 18:31:47 +04:00
cflag = tty->termios.c_cflag;
cp2101: Remove broken termios optimisation, use proper speed API I've also enabled the commented out support for 7200, 14400, 55854, 127117 and 3686400 baud as you can now set such rates in the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-26 21:54:12 +04:00
old_cflag = old_termios->c_cflag;
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
tty: move the termios object into the tty This will let us sort out a whole pile of tty related races. The alternative would be to keep points and refcount the termios objects. However 1. They are tiny anyway 2. Many devices don't use the stored copies 3. We can remove a pty special case Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-14 18:31:47 +04:00
if (tty->termios.c_ospeed != old_termios->c_ospeed)
USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-16 03:36:51 +04:00
cp210x_change_speed(tty, port, old_termios);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
/* If the number of data bits is to be updated */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
cp210x_get_line_ctl(port, &bits);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
case CS5:
bits |= BITS_DATA_5;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 5\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
case CS6:
bits |= BITS_DATA_6;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 6\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
case CS7:
bits |= BITS_DATA_7;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 7\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
case CS8:
bits |= BITS_DATA_8;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 8\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;
/*case CS9:
bits |= BITS_DATA_9;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - data bits = 9\n", __func__);
cp2101: coding style Bring up to coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:10:17 +04:00
break;*/
default:
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
bits |= BITS_DATA_8;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "Number of data bits requested not supported by device\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: serial: cp210x.c: add mark/space parity Add mark and space parity support. Signed-off-by: Roland Koebler <r.koebler@yahoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-09 22:37:08 +04:00
if ((cflag & (PARENB|PARODD|CMSPAR)) !=
(old_cflag & (PARENB|PARODD|CMSPAR))) {
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
cp210x_get_line_ctl(port, &bits);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
USB: serial: cp210x.c: add mark/space parity Add mark and space parity support. Signed-off-by: Roland Koebler <r.koebler@yahoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-09 22:37:08 +04:00
if (cflag & CMSPAR) {
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
if (cflag & PARODD) {
bits |= BITS_PARITY_MARK;
dev_dbg(dev, "%s - parity = MARK\n", __func__);
} else {
bits |= BITS_PARITY_SPACE;
dev_dbg(dev, "%s - parity = SPACE\n", __func__);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} else {
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
if (cflag & PARODD) {
bits |= BITS_PARITY_ODD;
dev_dbg(dev, "%s - parity = ODD\n", __func__);
} else {
bits |= BITS_PARITY_EVEN;
dev_dbg(dev, "%s - parity = EVEN\n", __func__);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
}
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "Parity mode not supported by device\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
cp210x_get_line_ctl(port, &bits);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - stop bits = 2\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
} else {
bits |= BITS_STOP_1;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - stop bits = 1\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "Number of stop bits requested not supported by device\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
struct cp210x_flow_ctl flow_ctl;
u32 ctl_hs;
u32 flow_repl;
USB: serial: cp210x: add new access functions for large registers cp210x_get_config and cp210x_set_config are cumbersome to use. This change switches large register access to use new block functions. The old functions are removed because now they become unused. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: minor style change ] Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:56 +03:00
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
sizeof(flow_ctl));
ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
dev_dbg(dev, "%s - read ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
__func__, ctl_hs, flow_repl);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
if (cflag & CRTSCTS) {
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
ctl_hs &= ~(CP210X_SERIAL_DTR_MASK |
CP210X_SERIAL_CTS_HANDSHAKE |
CP210X_SERIAL_DSR_HANDSHAKE |
CP210X_SERIAL_DCD_HANDSHAKE |
CP210X_SERIAL_DSR_SENSITIVITY);
ctl_hs |= CP210X_SERIAL_DTR_SHIFT(
CP210X_SERIAL_DTR_ACTIVE);
ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
/*
* FIXME: Why clear bits unrelated to flow control.
* Why clear CP210X_SERIAL_XOFF_CONTINUE which is
* never set
*/
flow_repl = 0;
flow_repl |= CP210X_SERIAL_RTS_SHIFT(
CP210X_SERIAL_RTS_FLOW_CTL);
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
} else {
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
ctl_hs &= ~(CP210X_SERIAL_DTR_MASK |
CP210X_SERIAL_CTS_HANDSHAKE |
CP210X_SERIAL_DSR_HANDSHAKE |
CP210X_SERIAL_DCD_HANDSHAKE |
CP210X_SERIAL_DSR_SENSITIVITY);
ctl_hs |= CP210X_SERIAL_DTR_SHIFT(
CP210X_SERIAL_DTR_ACTIVE);
/* FIXME: Why clear bits unrelated to flow control */
flow_repl &= 0xffffff00;
flow_repl |= CP210X_SERIAL_RTS_SHIFT(
CP210X_SERIAL_RTS_ACTIVE);
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(dev, "%s - flow control = NONE\n", __func__);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code Replaced magic numbers used in the CRTSCTS flag code with symbolic names from the chip specification. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-05 00:57:02 +03:00
dev_dbg(dev, "%s - write ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
__func__, ctl_hs, flow_repl);
flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
sizeof(flow_ctl));
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
}
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
static int cp210x_tiocmset(struct tty_struct *tty,
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
unsigned int set, unsigned int clear)
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:09:07 +04:00
struct usb_serial_port *port = tty->driver_data;
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 19:26:50 +03:00
return cp210x_tiocmset_port(port, set, clear);
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
}
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 19:26:50 +03:00
static int cp210x_tiocmset_port(struct usb_serial_port *port,
USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 00:37:42 +03:00
unsigned int set, unsigned int clear)
{
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
u16 control = 0;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
if (set & TIOCM_RTS) {
control |= CONTROL_RTS;
control |= CONTROL_WRITE_RTS;
}
if (set & TIOCM_DTR) {
control |= CONTROL_DTR;
control |= CONTROL_WRITE_DTR;
}
if (clear & TIOCM_RTS) {
control &= ~CONTROL_RTS;
control |= CONTROL_WRITE_RTS;
}
if (clear & TIOCM_DTR) {
control &= ~CONTROL_DTR;
control |= CONTROL_WRITE_DTR;
}
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
}
tty: cp210x: Fix carrier handling Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-28 23:12:33 +03:00
static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
{
if (on)
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 19:26:50 +03:00
cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0);
tty: cp210x: Fix carrier handling Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-28 23:12:33 +03:00
else
tiocmset: kill the file pointer argument Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-14 19:26:50 +03:00
cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS);
tty: cp210x: Fix carrier handling Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Karl Hiramoto <karl@hiramoto.org> Tested-by: Karl Hiramoto <karl@hiramoto.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-28 23:12:33 +03:00
}
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
static int cp210x_tiocmget(struct tty_struct *tty)
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:09:07 +04:00
struct usb_serial_port *port = tty->driver_data;
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
u8 control;
USB: cp2101.c fix sparse signedness mismatch warnings The get/set 2101_config helpers take an unsigned int rather than an int. It is safe to change these in each case and may even produce better code as it will be an unsigned divide rather than a signed divide in places. All other manipulation was setting/masking bits which will not be affected by the sign change. Fixes the following sparse warnings: drivers/usb/serial/cp2101.c:378:44: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:378:44: expected unsigned int *data drivers/usb/serial/cp2101.c:378:44: got int *<noident> drivers/usb/serial/cp2101.c:388:40: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:388:40: expected unsigned int *data drivers/usb/serial/cp2101.c:388:40: got int *<noident> drivers/usb/serial/cp2101.c:413:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:413:42: expected unsigned int *data drivers/usb/serial/cp2101.c:413:42: got int *<noident> drivers/usb/serial/cp2101.c:421:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:421:42: expected unsigned int *data drivers/usb/serial/cp2101.c:421:42: got int *<noident> drivers/usb/serial/cp2101.c:444:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:444:42: expected unsigned int *data drivers/usb/serial/cp2101.c:444:42: got int *<noident> drivers/usb/serial/cp2101.c:451:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:451:42: expected unsigned int *data drivers/usb/serial/cp2101.c:451:42: got int *<noident> drivers/usb/serial/cp2101.c:458:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:458:42: expected unsigned int *data drivers/usb/serial/cp2101.c:458:42: got int *<noident> drivers/usb/serial/cp2101.c:471:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:471:42: expected unsigned int *data drivers/usb/serial/cp2101.c:471:42: got int *<noident> drivers/usb/serial/cp2101.c:481:42: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:481:42: expected unsigned int *data drivers/usb/serial/cp2101.c:481:42: got int *<noident> drivers/usb/serial/cp2101.c:561:41: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:561:41: expected unsigned int *data drivers/usb/serial/cp2101.c:561:41: got int *<noident> drivers/usb/serial/cp2101.c:591:45: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:591:45: expected unsigned int *data drivers/usb/serial/cp2101.c:591:45: got int *<noident> drivers/usb/serial/cp2101.c:597:41: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:597:41: expected unsigned int *data drivers/usb/serial/cp2101.c:597:41: got int *<noident> drivers/usb/serial/cp2101.c:608:45: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:608:45: expected unsigned int *data drivers/usb/serial/cp2101.c:608:45: got int *<noident> drivers/usb/serial/cp2101.c:614:41: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:614:41: expected unsigned int *data drivers/usb/serial/cp2101.c:614:41: got int *<noident> drivers/usb/serial/cp2101.c:623:45: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:623:45: expected unsigned int *data drivers/usb/serial/cp2101.c:623:45: got int *<noident> drivers/usb/serial/cp2101.c:680:50: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:680:50: expected unsigned int *data drivers/usb/serial/cp2101.c:680:50: got int *<noident> drivers/usb/serial/cp2101.c:690:43: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:690:43: expected unsigned int *data drivers/usb/serial/cp2101.c:690:43: got int *<noident> drivers/usb/serial/cp2101.c:715:41: warning: incorrect type in argument 3 (different signedness) drivers/usb/serial/cp2101.c:715:41: expected unsigned int *data drivers/usb/serial/cp2101.c:715:41: got int *<noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-30 21:29:55 +04:00
int result;
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
USB: serial: cp210x: add 8-bit and 32-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 8 and 32-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:41 +03:00
cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
|((control & CONTROL_RING)? TIOCM_RI : 0)
|((control & CONTROL_DCD) ? TIOCM_CD : 0);
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);
[PATCH] USB: CP2101 Add support for flow control Added support to get/set flow control line levels using TIOCMGET and TIOCMSET. Added support for RTSCTS hardware flow control. cp2101_get_config and cp2101_set_config modified to support long request strings, required for configuring flow control. Signed-off-by: Craig Shelley craig@microtron.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-27 03:09:56 +04:00
return result;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: cp210x: fix whitespace issues Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 13:56:19 +04:00
static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
usb_serial: API all change USB serial likes to use port->tty back pointers for the real work it does and to do so without any actual locking. Unfortunately when you consider hangup events, hangup/parallel reopen or even worse hangup followed by parallel close events the tty->port and port->tty pointers are not guaranteed to be the same as port->tty is the active tty while tty->port is the port the tty may or may not still be attached to. So rework the entire API to pass the tty struct. For console cases we need to pass both for now. This shows up multiple drivers that immediately crash with USB console some of which have been fixed in the process. Longer term we need a proper tty as console abstraction Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22 14:09:07 +04:00
struct usb_serial_port *port = tty->driver_data;
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
u16 state;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
if (break_state == 0)
state = BREAK_OFF;
else
state = BREAK_ON;
USB: serial: cp210x.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Johan Hovold <jhovold@gmail.com> CC: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14 04:18:13 +04:00
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
USB: serial: cp210x: add 16-bit register access functions cp210x_get_config and cp210x_set_config are cumbersome to use. This change introduces new register access functions for 16-bit values, instead of the above functions. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-02-29 00:51:30 +03:00
cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
}
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
static int cp210x_port_probe(struct usb_serial_port *port)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
struct usb_serial *serial = port->serial;
USB: cp210x: fix port-data memory leak Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15 17:47:20 +04:00
struct usb_host_interface *cur_altsetting;
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
struct cp210x_port_private *port_priv;
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
int ret;
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
USB: cp210x: fix port-data memory leak Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15 17:47:20 +04:00
return -ENOMEM;
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
USB: cp210x: fix port-data memory leak Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15 17:47:20 +04:00
cur_altsetting = serial->interface->cur_altsetting;
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
port_priv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
usb_set_serial_port_data(port, port_priv);
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
USB: cp210x: work around cp2108 GET_LINE_CTL bug Add helper to access line-control register in order to work around a cp2108 GET_LINE_CTL bug. cp2108 GET_LINE_CTL returns the 16-bit value with the 2 bytes swapped. However, SET_LINE_CTL functions properly. When the driver tries to modify the register, it reads it, modifies some bits and writes back. Because the read bytes were swapped, this often results in an invalid value to be written. In turn, this causes cp2108 respond with a stall. The stall sometimes doesn't clear properly and cp2108 starts responding to following valid commands also with stalls, effectively failing. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> [johan: amend commit message, modify probe error handling ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:54 +03:00
ret = cp210x_detect_swapped_line_ctl(port);
if (ret) {
kfree(port_priv);
return ret;
}
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
return 0;
}
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
static int cp210x_port_remove(struct usb_serial_port *port)
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
{
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
struct cp210x_port_private *port_priv;
port_priv = usb_get_serial_port_data(port);
kfree(port_priv);
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
USB: cp210x: relocate private data from USB interface to port This change is preparation for implementing a cp2108 bug workaround. The workaround requires storing some private data. Right now the data is attached to the USB interface and allocated in the attach() callback. The bug detection requires USB I/O which is done easier from port_probe() callback rather than attach(). Since the USB access functions take port as a parameter, and since the private data is used exclusively by these functions, it can be allocated in port_probe(). Also, all cp210x devices have exactly 1 port per USB iterface, so moving private data from the USB interface to port is trivial. Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-10-29 00:02:34 +03:00
return 0;
usb: cp210x: Update to support CP2105 and multiple interface devices This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 23:42:39 +04:00
}
USB: serial: rework usb_serial_register/deregister_drivers() This reworks the usb_serial_register_drivers() and usb_serial_deregister_drivers() to not need a pointer to a struct usb_driver anymore. The usb_driver structure is now created dynamically and registered and unregistered as needed. This saves lines of code in each usb-serial driver. All in-kernel users of these functions were also fixed up at this time. The pl2303 driver was tested that everything worked properly. Thanks for the idea to do this from Alan Stern. Cc: Adhir Ramjiawan <adhirramjiawan0@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: Aleksey Babahin <tamerlan311@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Worsley <amworsley@gmail.com> Cc: Bart Hartgers <bart.hartgers@gmail.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Donald Lee <donald@asix.com.tw> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Gary Brubaker <xavyer@ix.netcom.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Kautuk Consul <consul.kautuk@gmail.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Lonnie Mendez <dignome@gmail.com> Cc: Matthias Bruestle and Harald Welte <support@reiner-sct.com> Cc: Matthias Urlichs <smurf@smurf.noris.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Michal Sroczynski <msroczyn@gmail.com> Cc: "Michał Wróbel" <michal.wrobel@flytronic.pl> Cc: Oliver Neukum <oliver@neukum.name> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Berger <pberger@brimson.com> Cc: Preston Fick <preston.fick@silabs.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Rigbert Hamisch <rigbert@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Support Department <support@connecttech.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: Wang YanQing <Udknight@gmail.com> Cc: William Greathouse <wgreathouse@smva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 02:46:14 +04:00
module_usb_serial_driver(serial_drivers, id_table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");