2019-07-31 18:57:31 +03:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
/*
|
2018-07-26 15:22:02 +03:00
|
|
|
* Copyright (C) 2018 HUAWEI, Inc.
|
2020-07-13 16:09:44 +03:00
|
|
|
* https://www.huawei.com/
|
2018-07-26 15:22:02 +03:00
|
|
|
* Created by Gao Xiang <gaoxiang25@huawei.com>
|
|
|
|
*/
|
2019-07-31 18:57:32 +03:00
|
|
|
#ifndef __EROFS_FS_ZDATA_H
|
|
|
|
#define __EROFS_FS_ZDATA_H
|
2018-07-26 15:22:02 +03:00
|
|
|
|
|
|
|
#include "internal.h"
|
2019-07-31 18:57:32 +03:00
|
|
|
#include "zpvec.h"
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-06-24 10:22:57 +03:00
|
|
|
#define Z_EROFS_NR_INLINE_PAGEVECS 3
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
/*
|
|
|
|
* Structure fields follow one of the following exclusion rules.
|
|
|
|
*
|
|
|
|
* I: Modifiable by initialization/destruction paths and read-only
|
2019-07-31 18:57:47 +03:00
|
|
|
* for everyone else;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
*
|
2019-07-31 18:57:47 +03:00
|
|
|
* L: Field should be protected by pageset lock;
|
|
|
|
*
|
|
|
|
* A: Field should be accessed / updated in atomic for parallelized code.
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
*/
|
2019-07-31 18:57:47 +03:00
|
|
|
struct z_erofs_collection {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
struct mutex lock;
|
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
/* I: page offset of start position of decompression */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
unsigned short pageofs;
|
2019-07-31 18:57:47 +03:00
|
|
|
|
|
|
|
/* L: maximum relative page index in pagevec[] */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
unsigned short nr_pages;
|
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
/* L: total number of pages in pagevec[] */
|
2019-07-15 15:21:27 +03:00
|
|
|
unsigned int vcnt;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
|
|
|
union {
|
2019-07-31 18:57:47 +03:00
|
|
|
/* L: inline a certain number of pagevecs for bootstrap */
|
2019-06-24 10:22:53 +03:00
|
|
|
erofs_vtptr_t pagevec[Z_EROFS_NR_INLINE_PAGEVECS];
|
2019-07-31 18:57:47 +03:00
|
|
|
|
|
|
|
/* I: can be used to free the pcluster by RCU. */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
struct rcu_head rcu;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_PCLUSTER_FULL_LENGTH 0x00000001
|
|
|
|
#define Z_EROFS_PCLUSTER_LENGTH_BIT 1
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
/*
|
|
|
|
* let's leave a type here in case of introducing
|
|
|
|
* another tagged pointer later.
|
|
|
|
*/
|
|
|
|
typedef void *z_erofs_next_pcluster_t;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
struct z_erofs_pcluster {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
struct erofs_workgroup obj;
|
2019-07-31 18:57:47 +03:00
|
|
|
struct z_erofs_collection primary_collection;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
/* A: point to next chained pcluster or TAILs */
|
|
|
|
z_erofs_next_pcluster_t next;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
/* A: compressed pages (including multi-usage pages) */
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
struct page *compressed_pages[Z_EROFS_CLUSTER_MAX_PAGES];
|
2019-07-31 18:57:47 +03:00
|
|
|
|
|
|
|
/* A: lower limit of decompressed length and if full length or not */
|
|
|
|
unsigned int length;
|
|
|
|
|
|
|
|
/* I: compression algorithm format */
|
|
|
|
unsigned char algorithmformat;
|
|
|
|
/* I: bit shift of physical cluster size */
|
|
|
|
unsigned char clusterbits;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
};
|
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
#define z_erofs_primarycollection(pcluster) (&(pcluster)->primary_collection)
|
|
|
|
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
/* let's avoid the valid 32-bit kernel addresses */
|
|
|
|
|
|
|
|
/* the chained workgroup has't submitted io (still open) */
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_PCLUSTER_TAIL ((void *)0x5F0ECAFE)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
/* the chained workgroup has already submitted io */
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_PCLUSTER_TAIL_CLOSED ((void *)0x5F0EDEAD)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_PCLUSTER_NIL (NULL)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_WORKGROUP_SIZE sizeof(struct z_erofs_pcluster)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-10-08 15:56:15 +03:00
|
|
|
struct z_erofs_decompressqueue {
|
|
|
|
struct super_block *sb;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
atomic_t pending_bios;
|
2019-07-31 18:57:47 +03:00
|
|
|
z_erofs_next_pcluster_t head;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
|
|
|
union {
|
|
|
|
wait_queue_head_t wait;
|
|
|
|
struct work_struct work;
|
|
|
|
} u;
|
|
|
|
};
|
|
|
|
|
2019-07-31 18:57:36 +03:00
|
|
|
#define MNGD_MAPPING(sbi) ((sbi)->managed_cache->i_mapping)
|
|
|
|
static inline bool erofs_page_is_managed(const struct erofs_sb_info *sbi,
|
|
|
|
struct page *page)
|
|
|
|
{
|
|
|
|
return page->mapping == MNGD_MAPPING(sbi);
|
|
|
|
}
|
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_ONLINEPAGE_COUNT_BITS 2
|
|
|
|
#define Z_EROFS_ONLINEPAGE_COUNT_MASK ((1 << Z_EROFS_ONLINEPAGE_COUNT_BITS) - 1)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
#define Z_EROFS_ONLINEPAGE_INDEX_SHIFT (Z_EROFS_ONLINEPAGE_COUNT_BITS)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* waiters (aka. ongoing_packs): # to unlock the page
|
|
|
|
* sub-index: 0 - for partial page, >= 1 full page sub-index
|
|
|
|
*/
|
|
|
|
typedef atomic_t z_erofs_onlinepage_t;
|
|
|
|
|
|
|
|
/* type punning */
|
|
|
|
union z_erofs_onlinepage_converter {
|
|
|
|
z_erofs_onlinepage_t *o;
|
|
|
|
unsigned long *v;
|
|
|
|
};
|
|
|
|
|
2019-07-15 15:21:27 +03:00
|
|
|
static inline unsigned int z_erofs_onlinepage_index(struct page *page)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
{
|
|
|
|
union z_erofs_onlinepage_converter u;
|
|
|
|
|
2019-06-08 12:49:18 +03:00
|
|
|
DBG_BUGON(!PagePrivate(page));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
u.v = &page_private(page);
|
|
|
|
|
|
|
|
return atomic_read(u.o) >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void z_erofs_onlinepage_init(struct page *page)
|
|
|
|
{
|
|
|
|
union {
|
|
|
|
z_erofs_onlinepage_t o;
|
|
|
|
unsigned long v;
|
|
|
|
/* keep from being unlocked in advance */
|
|
|
|
} u = { .o = ATOMIC_INIT(1) };
|
|
|
|
|
|
|
|
set_page_private(page, u.v);
|
|
|
|
smp_wmb();
|
|
|
|
SetPagePrivate(page);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void z_erofs_onlinepage_fixup(struct page *page,
|
|
|
|
uintptr_t index, bool down)
|
|
|
|
{
|
2020-06-19 02:43:49 +03:00
|
|
|
union z_erofs_onlinepage_converter u = { .v = &page_private(page) };
|
|
|
|
int orig, orig_index, val;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2020-06-19 02:43:49 +03:00
|
|
|
repeat:
|
|
|
|
orig = atomic_read(u.o);
|
|
|
|
orig_index = orig >> Z_EROFS_ONLINEPAGE_INDEX_SHIFT;
|
|
|
|
if (orig_index) {
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
if (!index)
|
|
|
|
return;
|
|
|
|
|
2020-06-19 02:43:49 +03:00
|
|
|
DBG_BUGON(orig_index != index);
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
}
|
|
|
|
|
2020-06-19 02:43:49 +03:00
|
|
|
val = (index << Z_EROFS_ONLINEPAGE_INDEX_SHIFT) |
|
|
|
|
((orig & Z_EROFS_ONLINEPAGE_COUNT_MASK) + (unsigned int)down);
|
|
|
|
if (atomic_cmpxchg(u.o, orig, val) != orig)
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
goto repeat;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void z_erofs_onlinepage_endio(struct page *page)
|
|
|
|
{
|
|
|
|
union z_erofs_onlinepage_converter u;
|
2019-07-15 15:21:27 +03:00
|
|
|
unsigned int v;
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2019-06-08 12:49:18 +03:00
|
|
|
DBG_BUGON(!PagePrivate(page));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
u.v = &page_private(page);
|
|
|
|
|
|
|
|
v = atomic_dec_return(u.o);
|
|
|
|
if (!(v & Z_EROFS_ONLINEPAGE_COUNT_MASK)) {
|
|
|
|
ClearPagePrivate(page);
|
|
|
|
if (!PageError(page))
|
|
|
|
SetPageUptodate(page);
|
|
|
|
unlock_page(page);
|
|
|
|
}
|
2019-09-04 05:09:09 +03:00
|
|
|
erofs_dbg("%s, page %p value %x", __func__, page, atomic_read(u.o));
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
}
|
|
|
|
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_VMAP_ONSTACK_PAGES \
|
2018-07-28 10:10:32 +03:00
|
|
|
min_t(unsigned int, THREAD_SIZE / 8 / sizeof(struct page *), 96U)
|
2019-07-31 18:57:47 +03:00
|
|
|
#define Z_EROFS_VMAP_GLOBAL_PAGES 2048
|
staging: erofs: introduce VLE decompression support
This patch introduces the basic in-place VLE decompression
implementation for the erofs file system.
Compared with fixed-sized input compression, it implements
what we call 'the variable-length extent compression' which
specifies the same output size for each compression block
to make the full use of IO bandwidth (which means almost
all data from block device can be directly used for decomp-
ression), improve the real (rather than just via data caching,
which costs more memory) random read and keep the relatively
lower compression ratios (it saves more storage space than
fixed-sized input compression which is also configured with
the same input block size), as illustrated below:
|--- variable-length extent ---|------ VLE ------|--- VLE ---|
/> clusterofs /> clusterofs /> clusterofs /> clusterofs
++---|-------++-----------++---------|-++-----------++-|---------++-|
...|| | || || | || || | || | ... original data
++---|-------++-----------++---------|-++-----------++-|---------++-|
++->cluster<-++->cluster<-++->cluster<-++->cluster<-++->cluster<-++
size size size size size
\ / / /
\ / / /
\ / / /
++-----------++-----------++-----------++
... || || || || ... compressed clusters
++-----------++-----------++-----------++
++->cluster<-++->cluster<-++->cluster<-++
size size size
The main point of 'in-place' refers to the decompression mode:
Instead of allocating independent compressed pages and data
structures, it reuses the allocated file cache pages at most
to store its compressed data and the corresponding pagevec in
a time-sharing approach by default, which will be useful for
low memory scenario.
In the end, unlike the other filesystems with (de)compression
support using a relatively large compression block size, which
reads and decompresses >= 128KB at once, and gains a more
good-looking random read (In fact it collects small random reads
into large sequential reads and caches all decompressed data
in memory, but it is unacceptable especially for embedded devices
with limited memory, and it is not the real random read), we
select a universal small-sized 4KB compressed cluster, which is
the smallest page size for most architectures, and all compressed
clusters can be read and decompressed independently, which ensures
random read number for all use cases.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-26 15:22:06 +03:00
|
|
|
|
2018-07-26 15:22:02 +03:00
|
|
|
#endif
|
|
|
|
|