WSL2-Linux-Kernel/arch/x86/events/intel/ds.c

1369 строки
36 KiB
C
Исходник Обычный вид История

#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <asm/perf_event.h>
#include <asm/insn.h>
#include "../perf_event.h"
/* The size of a BTS record in bytes: */
#define BTS_RECORD_SIZE 24
#define BTS_BUFFER_SIZE (PAGE_SIZE << 4)
#define PEBS_BUFFER_SIZE (PAGE_SIZE << 4)
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
#define PEBS_FIXUP_SIZE PAGE_SIZE
/*
* pebs_record_32 for p4 and core not supported
struct pebs_record_32 {
u32 flags, ip;
u32 ax, bc, cx, dx;
u32 si, di, bp, sp;
};
*/
union intel_x86_pebs_dse {
u64 val;
struct {
unsigned int ld_dse:4;
unsigned int ld_stlb_miss:1;
unsigned int ld_locked:1;
unsigned int ld_reserved:26;
};
struct {
unsigned int st_l1d_hit:1;
unsigned int st_reserved1:3;
unsigned int st_stlb_miss:1;
unsigned int st_locked:1;
unsigned int st_reserved2:26;
};
};
/*
* Map PEBS Load Latency Data Source encodings to generic
* memory data source information
*/
#define P(a, b) PERF_MEM_S(a, b)
#define OP_LH (P(OP, LOAD) | P(LVL, HIT))
#define SNOOP_NONE_MISS (P(SNOOP, NONE) | P(SNOOP, MISS))
static const u64 pebs_data_source[] = {
P(OP, LOAD) | P(LVL, MISS) | P(LVL, L3) | P(SNOOP, NA),/* 0x00:ukn L3 */
OP_LH | P(LVL, L1) | P(SNOOP, NONE), /* 0x01: L1 local */
OP_LH | P(LVL, LFB) | P(SNOOP, NONE), /* 0x02: LFB hit */
OP_LH | P(LVL, L2) | P(SNOOP, NONE), /* 0x03: L2 hit */
OP_LH | P(LVL, L3) | P(SNOOP, NONE), /* 0x04: L3 hit */
OP_LH | P(LVL, L3) | P(SNOOP, MISS), /* 0x05: L3 hit, snoop miss */
OP_LH | P(LVL, L3) | P(SNOOP, HIT), /* 0x06: L3 hit, snoop hit */
OP_LH | P(LVL, L3) | P(SNOOP, HITM), /* 0x07: L3 hit, snoop hitm */
OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HIT), /* 0x08: L3 miss snoop hit */
OP_LH | P(LVL, REM_CCE1) | P(SNOOP, HITM), /* 0x09: L3 miss snoop hitm*/
OP_LH | P(LVL, LOC_RAM) | P(SNOOP, HIT), /* 0x0a: L3 miss, shared */
OP_LH | P(LVL, REM_RAM1) | P(SNOOP, HIT), /* 0x0b: L3 miss, shared */
OP_LH | P(LVL, LOC_RAM) | SNOOP_NONE_MISS,/* 0x0c: L3 miss, excl */
OP_LH | P(LVL, REM_RAM1) | SNOOP_NONE_MISS,/* 0x0d: L3 miss, excl */
OP_LH | P(LVL, IO) | P(SNOOP, NONE), /* 0x0e: I/O */
OP_LH | P(LVL, UNC) | P(SNOOP, NONE), /* 0x0f: uncached */
};
static u64 precise_store_data(u64 status)
{
union intel_x86_pebs_dse dse;
u64 val = P(OP, STORE) | P(SNOOP, NA) | P(LVL, L1) | P(TLB, L2);
dse.val = status;
/*
* bit 4: TLB access
* 1 = stored missed 2nd level TLB
*
* so it either hit the walker or the OS
* otherwise hit 2nd level TLB
*/
if (dse.st_stlb_miss)
val |= P(TLB, MISS);
else
val |= P(TLB, HIT);
/*
* bit 0: hit L1 data cache
* if not set, then all we know is that
* it missed L1D
*/
if (dse.st_l1d_hit)
val |= P(LVL, HIT);
else
val |= P(LVL, MISS);
/*
* bit 5: Locked prefix
*/
if (dse.st_locked)
val |= P(LOCK, LOCKED);
return val;
}
static u64 precise_datala_hsw(struct perf_event *event, u64 status)
{
union perf_mem_data_src dse;
dse.val = PERF_MEM_NA;
if (event->hw.flags & PERF_X86_EVENT_PEBS_ST_HSW)
dse.mem_op = PERF_MEM_OP_STORE;
else if (event->hw.flags & PERF_X86_EVENT_PEBS_LD_HSW)
dse.mem_op = PERF_MEM_OP_LOAD;
/*
* L1 info only valid for following events:
*
* MEM_UOPS_RETIRED.STLB_MISS_STORES
* MEM_UOPS_RETIRED.LOCK_STORES
* MEM_UOPS_RETIRED.SPLIT_STORES
* MEM_UOPS_RETIRED.ALL_STORES
*/
if (event->hw.flags & PERF_X86_EVENT_PEBS_ST_HSW) {
if (status & 1)
dse.mem_lvl = PERF_MEM_LVL_L1 | PERF_MEM_LVL_HIT;
else
dse.mem_lvl = PERF_MEM_LVL_L1 | PERF_MEM_LVL_MISS;
}
return dse.val;
}
static u64 load_latency_data(u64 status)
{
union intel_x86_pebs_dse dse;
u64 val;
int model = boot_cpu_data.x86_model;
int fam = boot_cpu_data.x86;
dse.val = status;
/*
* use the mapping table for bit 0-3
*/
val = pebs_data_source[dse.ld_dse];
/*
* Nehalem models do not support TLB, Lock infos
*/
if (fam == 0x6 && (model == 26 || model == 30
|| model == 31 || model == 46)) {
val |= P(TLB, NA) | P(LOCK, NA);
return val;
}
/*
* bit 4: TLB access
* 0 = did not miss 2nd level TLB
* 1 = missed 2nd level TLB
*/
if (dse.ld_stlb_miss)
val |= P(TLB, MISS) | P(TLB, L2);
else
val |= P(TLB, HIT) | P(TLB, L1) | P(TLB, L2);
/*
* bit 5: locked prefix
*/
if (dse.ld_locked)
val |= P(LOCK, LOCKED);
return val;
}
struct pebs_record_core {
u64 flags, ip;
u64 ax, bx, cx, dx;
u64 si, di, bp, sp;
u64 r8, r9, r10, r11;
u64 r12, r13, r14, r15;
};
struct pebs_record_nhm {
u64 flags, ip;
u64 ax, bx, cx, dx;
u64 si, di, bp, sp;
u64 r8, r9, r10, r11;
u64 r12, r13, r14, r15;
u64 status, dla, dse, lat;
};
/*
* Same as pebs_record_nhm, with two additional fields.
*/
struct pebs_record_hsw {
u64 flags, ip;
u64 ax, bx, cx, dx;
u64 si, di, bp, sp;
u64 r8, r9, r10, r11;
u64 r12, r13, r14, r15;
u64 status, dla, dse, lat;
u64 real_ip, tsx_tuning;
};
union hsw_tsx_tuning {
struct {
u32 cycles_last_block : 32,
hle_abort : 1,
rtm_abort : 1,
instruction_abort : 1,
non_instruction_abort : 1,
retry : 1,
data_conflict : 1,
capacity_writes : 1,
capacity_reads : 1;
};
u64 value;
};
#define PEBS_HSW_TSX_FLAGS 0xff00000000ULL
/* Same as HSW, plus TSC */
struct pebs_record_skl {
u64 flags, ip;
u64 ax, bx, cx, dx;
u64 si, di, bp, sp;
u64 r8, r9, r10, r11;
u64 r12, r13, r14, r15;
u64 status, dla, dse, lat;
u64 real_ip, tsx_tuning;
u64 tsc;
};
void init_debug_store_on_cpu(int cpu)
{
struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
if (!ds)
return;
wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
(u32)((u64)(unsigned long)ds),
(u32)((u64)(unsigned long)ds >> 32));
}
void fini_debug_store_on_cpu(int cpu)
{
if (!per_cpu(cpu_hw_events, cpu).ds)
return;
wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
}
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
static DEFINE_PER_CPU(void *, insn_buffer);
static int alloc_pebs_buffer(int cpu)
{
struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
int node = cpu_to_node(cpu);
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
int max;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
void *buffer, *ibuffer;
if (!x86_pmu.pebs)
return 0;
buffer = kzalloc_node(PEBS_BUFFER_SIZE, GFP_KERNEL, node);
if (unlikely(!buffer))
return -ENOMEM;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
/*
* HSW+ already provides us the eventing ip; no need to allocate this
* buffer then.
*/
if (x86_pmu.intel_cap.pebs_format < 2) {
ibuffer = kzalloc_node(PEBS_FIXUP_SIZE, GFP_KERNEL, node);
if (!ibuffer) {
kfree(buffer);
return -ENOMEM;
}
per_cpu(insn_buffer, cpu) = ibuffer;
}
max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size;
ds->pebs_buffer_base = (u64)(unsigned long)buffer;
ds->pebs_index = ds->pebs_buffer_base;
ds->pebs_absolute_maximum = ds->pebs_buffer_base +
max * x86_pmu.pebs_record_size;
return 0;
}
static void release_pebs_buffer(int cpu)
{
struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
if (!ds || !x86_pmu.pebs)
return;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
kfree(per_cpu(insn_buffer, cpu));
per_cpu(insn_buffer, cpu) = NULL;
kfree((void *)(unsigned long)ds->pebs_buffer_base);
ds->pebs_buffer_base = 0;
}
static int alloc_bts_buffer(int cpu)
{
struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
int node = cpu_to_node(cpu);
int max, thresh;
void *buffer;
if (!x86_pmu.bts)
return 0;
buffer = kzalloc_node(BTS_BUFFER_SIZE, GFP_KERNEL | __GFP_NOWARN, node);
if (unlikely(!buffer)) {
WARN_ONCE(1, "%s: BTS buffer allocation failure\n", __func__);
return -ENOMEM;
}
max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE;
thresh = max / 16;
ds->bts_buffer_base = (u64)(unsigned long)buffer;
ds->bts_index = ds->bts_buffer_base;
ds->bts_absolute_maximum = ds->bts_buffer_base +
max * BTS_RECORD_SIZE;
ds->bts_interrupt_threshold = ds->bts_absolute_maximum -
thresh * BTS_RECORD_SIZE;
return 0;
}
static void release_bts_buffer(int cpu)
{
struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
if (!ds || !x86_pmu.bts)
return;
kfree((void *)(unsigned long)ds->bts_buffer_base);
ds->bts_buffer_base = 0;
}
static int alloc_ds_buffer(int cpu)
{
int node = cpu_to_node(cpu);
struct debug_store *ds;
ds = kzalloc_node(sizeof(*ds), GFP_KERNEL, node);
if (unlikely(!ds))
return -ENOMEM;
per_cpu(cpu_hw_events, cpu).ds = ds;
return 0;
}
static void release_ds_buffer(int cpu)
{
struct debug_store *ds = per_cpu(cpu_hw_events, cpu).ds;
if (!ds)
return;
per_cpu(cpu_hw_events, cpu).ds = NULL;
kfree(ds);
}
void release_ds_buffers(void)
{
int cpu;
if (!x86_pmu.bts && !x86_pmu.pebs)
return;
get_online_cpus();
for_each_online_cpu(cpu)
fini_debug_store_on_cpu(cpu);
for_each_possible_cpu(cpu) {
release_pebs_buffer(cpu);
release_bts_buffer(cpu);
release_ds_buffer(cpu);
}
put_online_cpus();
}
void reserve_ds_buffers(void)
{
int bts_err = 0, pebs_err = 0;
int cpu;
x86_pmu.bts_active = 0;
x86_pmu.pebs_active = 0;
if (!x86_pmu.bts && !x86_pmu.pebs)
return;
if (!x86_pmu.bts)
bts_err = 1;
if (!x86_pmu.pebs)
pebs_err = 1;
get_online_cpus();
for_each_possible_cpu(cpu) {
if (alloc_ds_buffer(cpu)) {
bts_err = 1;
pebs_err = 1;
}
if (!bts_err && alloc_bts_buffer(cpu))
bts_err = 1;
if (!pebs_err && alloc_pebs_buffer(cpu))
pebs_err = 1;
if (bts_err && pebs_err)
break;
}
if (bts_err) {
for_each_possible_cpu(cpu)
release_bts_buffer(cpu);
}
if (pebs_err) {
for_each_possible_cpu(cpu)
release_pebs_buffer(cpu);
}
if (bts_err && pebs_err) {
for_each_possible_cpu(cpu)
release_ds_buffer(cpu);
} else {
if (x86_pmu.bts && !bts_err)
x86_pmu.bts_active = 1;
if (x86_pmu.pebs && !pebs_err)
x86_pmu.pebs_active = 1;
for_each_online_cpu(cpu)
init_debug_store_on_cpu(cpu);
}
put_online_cpus();
}
/*
* BTS
*/
struct event_constraint bts_constraint =
EVENT_CONSTRAINT(0, 1ULL << INTEL_PMC_IDX_FIXED_BTS, 0);
void intel_pmu_enable_bts(u64 config)
{
unsigned long debugctlmsr;
debugctlmsr = get_debugctlmsr();
debugctlmsr |= DEBUGCTLMSR_TR;
debugctlmsr |= DEBUGCTLMSR_BTS;
if (config & ARCH_PERFMON_EVENTSEL_INT)
debugctlmsr |= DEBUGCTLMSR_BTINT;
if (!(config & ARCH_PERFMON_EVENTSEL_OS))
debugctlmsr |= DEBUGCTLMSR_BTS_OFF_OS;
if (!(config & ARCH_PERFMON_EVENTSEL_USR))
debugctlmsr |= DEBUGCTLMSR_BTS_OFF_USR;
update_debugctlmsr(debugctlmsr);
}
void intel_pmu_disable_bts(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
unsigned long debugctlmsr;
if (!cpuc->ds)
return;
debugctlmsr = get_debugctlmsr();
debugctlmsr &=
~(DEBUGCTLMSR_TR | DEBUGCTLMSR_BTS | DEBUGCTLMSR_BTINT |
DEBUGCTLMSR_BTS_OFF_OS | DEBUGCTLMSR_BTS_OFF_USR);
update_debugctlmsr(debugctlmsr);
}
int intel_pmu_drain_bts_buffer(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct debug_store *ds = cpuc->ds;
struct bts_record {
u64 from;
u64 to;
u64 flags;
};
struct perf_event *event = cpuc->events[INTEL_PMC_IDX_FIXED_BTS];
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
struct bts_record *at, *base, *top;
struct perf_output_handle handle;
struct perf_event_header header;
struct perf_sample_data data;
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
unsigned long skip = 0;
struct pt_regs regs;
if (!event)
return 0;
if (!x86_pmu.bts_active)
return 0;
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
base = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
top = (struct bts_record *)(unsigned long)ds->bts_index;
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
if (top <= base)
return 0;
memset(&regs, 0, sizeof(regs));
ds->bts_index = ds->bts_buffer_base;
perf_sample_data_init(&data, 0, event->hw.last_period);
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
/*
* BTS leaks kernel addresses in branches across the cpl boundary,
* such as traps or system calls, so unless the user is asking for
* kernel tracing (and right now it's not possible), we'd need to
* filter them out. But first we need to count how many of those we
* have in the current batch. This is an extra O(n) pass, however,
* it's much faster than the other one especially considering that
* n <= 2560 (BTS_BUFFER_SIZE / BTS_RECORD_SIZE * 15/16; see the
* alloc_bts_buffer()).
*/
for (at = base; at < top; at++) {
/*
* Note that right now *this* BTS code only works if
* attr::exclude_kernel is set, but let's keep this extra
* check here in case that changes.
*/
if (event->attr.exclude_kernel &&
(kernel_ip(at->from) || kernel_ip(at->to)))
skip++;
}
/*
* Prepare a generic sample, i.e. fill in the invariant fields.
* We will overwrite the from and to address before we output
* the sample.
*/
perf_prepare_sample(&header, &data, event, &regs);
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
if (perf_output_begin(&handle, event, header.size *
(top - base - skip)))
return 1;
perf/x86/intel/ds: Work around BTS leaking kernel addresses BTS leaks kernel addresses even in userspace-only mode due to imprecise IP sampling, so sometimes syscall entry points or page fault handler addresses end up in a userspace trace. Since this driver uses a relatively small buffer for BTS records and it has to iterate through them anyway, it can also take on the additional job of filtering out the records that contain kernel addresses when kernel space tracing is not enabled. This patch changes the bts code to skip the offending records from perf output. In order to request the exact amount of space on the ring buffer, we need to do an extra pass through the records to know how many there are of the valid ones, but considering the small size of the buffer, this extra pass adds very little overhead to the nmi handler. This way we won't end up with awkward IP samples with zero IPs in the perf stream. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1441030168-6853-2-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-31 17:09:27 +03:00
for (at = base; at < top; at++) {
/* Filter out any records that contain kernel addresses. */
if (event->attr.exclude_kernel &&
(kernel_ip(at->from) || kernel_ip(at->to)))
continue;
data.ip = at->from;
data.addr = at->to;
perf_output_sample(&handle, &header, &data, event);
}
perf_output_end(&handle);
/* There's new data available. */
event->hw.interrupts++;
event->pending_kill = POLL_IN;
return 1;
}
static inline void intel_pmu_drain_pebs_buffer(void)
{
struct pt_regs regs;
x86_pmu.drain_pebs(&regs);
}
void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in)
{
if (!sched_in)
intel_pmu_drain_pebs_buffer();
}
/*
* PEBS
*/
struct event_constraint intel_core2_pebs_event_constraints[] = {
INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */
INTEL_FLAGS_UEVENT_CONSTRAINT(0xfec1, 0x1), /* X87_OPS_RETIRED.ANY */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* BR_INST_RETIRED.MISPRED */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */
/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_atom_pebs_event_constraints[] = {
INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */
/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_slm_pebs_event_constraints[] = {
/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1),
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_nehalem_pebs_event_constraints[] = {
INTEL_PLD_CONSTRAINT(0x100b, 0xf), /* MEM_INST_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc0, 0xf), /* INST_RETIRED.ANY */
INTEL_EVENT_CONSTRAINT(0xc2, 0xf), /* UOPS_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x02c5, 0xf), /* BR_MISP_RETIRED.NEAR_CALL */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc7, 0xf), /* SSEX_UOPS_RETIRED.* */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x20c8, 0xf), /* ITLB_MISS_RETIRED */
INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf), /* MEM_LOAD_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf), /* FP_ASSIST.* */
/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_westmere_pebs_event_constraints[] = {
INTEL_PLD_CONSTRAINT(0x100b, 0xf), /* MEM_INST_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc0, 0xf), /* INSTR_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xc2, 0xf), /* UOPS_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0xc7, 0xf), /* SSEX_UOPS_RETIRED.* */
INTEL_FLAGS_UEVENT_CONSTRAINT(0x20c8, 0xf), /* ITLB_MISS_RETIRED */
INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf), /* MEM_LOAD_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf), /* FP_ASSIST.* */
/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_snb_pebs_event_constraints[] = {
INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
INTEL_PLD_CONSTRAINT(0x01cd, 0x8), /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
INTEL_PST_CONSTRAINT(0x02cd, 0x8), /* MEM_TRANS_RETIRED.PRECISE_STORES */
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */
INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
INTEL_EXCLEVT_CONSTRAINT(0xd3, 0xf), /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_ivb_pebs_event_constraints[] = {
INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
INTEL_PLD_CONSTRAINT(0x01cd, 0x8), /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
INTEL_PST_CONSTRAINT(0x02cd, 0x8), /* MEM_TRANS_RETIRED.PRECISE_STORES */
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
perf/x86: Use INST_RETIRED.PREC_DIST for cycles: ppp Add a new 'three-p' precise level, that uses INST_RETIRED.PREC_DIST as base. The basic mechanism of abusing the inverse cmask to get all cycles works the same as before. PREC_DIST is available on Sandy Bridge or later. It had some problems on Sandy Bridge, so we only use it on IvyBridge and later. I tested it on Broadwell and Skylake. PREC_DIST has special support for avoiding shadow effects, which can give better results compare to UOPS_RETIRED. The drawback is that PREC_DIST can only schedule on counter 1, but that is ok for cycle sampling, as there is normally no need to do multiple cycle sampling runs in parallel. It is still possible to run perf top in parallel, as that doesn't use precise mode. Also of course the multiplexing can still allow parallel operation. :pp stays with the previous event. Example: Sample a loop with 10 sqrt with old cycles:pp 0.14 │10: sqrtps %xmm1,%xmm0 <-------------- 9.13 │ sqrtps %xmm1,%xmm0 11.58 │ sqrtps %xmm1,%xmm0 11.51 │ sqrtps %xmm1,%xmm0 6.27 │ sqrtps %xmm1,%xmm0 10.38 │ sqrtps %xmm1,%xmm0 12.20 │ sqrtps %xmm1,%xmm0 12.74 │ sqrtps %xmm1,%xmm0 5.40 │ sqrtps %xmm1,%xmm0 10.14 │ sqrtps %xmm1,%xmm0 10.51 │ ↑ jmp 10 We expect all 10 sqrt to get roughly the sample number of samples. But you can see that the instruction directly after the JMP is systematically underestimated in the result, due to sampling shadow effects. With the new PREC_DIST based sampling this problem is gone and all instructions show up roughly evenly: 9.51 │10: sqrtps %xmm1,%xmm0 11.74 │ sqrtps %xmm1,%xmm0 11.84 │ sqrtps %xmm1,%xmm0 6.05 │ sqrtps %xmm1,%xmm0 10.46 │ sqrtps %xmm1,%xmm0 12.25 │ sqrtps %xmm1,%xmm0 12.18 │ sqrtps %xmm1,%xmm0 5.26 │ sqrtps %xmm1,%xmm0 10.13 │ sqrtps %xmm1,%xmm0 10.43 │ sqrtps %xmm1,%xmm0 0.16 │ ↑ jmp 10 Even with PREC_DIST there is still sampling skid and the result is not completely even, but systematic shadow effects are significantly reduced. The improvements are mainly expected to make a difference in high IPC code. With low IPC it should be similar. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1448929689-13771-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-04 14:50:52 +03:00
/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */
INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
INTEL_EXCLEVT_CONSTRAINT(0xd3, 0xf), /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_hsw_pebs_event_constraints[] = {
INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
INTEL_PLD_CONSTRAINT(0x01cd, 0xf), /* MEM_TRANS_RETIRED.* */
/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
perf/x86: Use INST_RETIRED.PREC_DIST for cycles: ppp Add a new 'three-p' precise level, that uses INST_RETIRED.PREC_DIST as base. The basic mechanism of abusing the inverse cmask to get all cycles works the same as before. PREC_DIST is available on Sandy Bridge or later. It had some problems on Sandy Bridge, so we only use it on IvyBridge and later. I tested it on Broadwell and Skylake. PREC_DIST has special support for avoiding shadow effects, which can give better results compare to UOPS_RETIRED. The drawback is that PREC_DIST can only schedule on counter 1, but that is ok for cycle sampling, as there is normally no need to do multiple cycle sampling runs in parallel. It is still possible to run perf top in parallel, as that doesn't use precise mode. Also of course the multiplexing can still allow parallel operation. :pp stays with the previous event. Example: Sample a loop with 10 sqrt with old cycles:pp 0.14 │10: sqrtps %xmm1,%xmm0 <-------------- 9.13 │ sqrtps %xmm1,%xmm0 11.58 │ sqrtps %xmm1,%xmm0 11.51 │ sqrtps %xmm1,%xmm0 6.27 │ sqrtps %xmm1,%xmm0 10.38 │ sqrtps %xmm1,%xmm0 12.20 │ sqrtps %xmm1,%xmm0 12.74 │ sqrtps %xmm1,%xmm0 5.40 │ sqrtps %xmm1,%xmm0 10.14 │ sqrtps %xmm1,%xmm0 10.51 │ ↑ jmp 10 We expect all 10 sqrt to get roughly the sample number of samples. But you can see that the instruction directly after the JMP is systematically underestimated in the result, due to sampling shadow effects. With the new PREC_DIST based sampling this problem is gone and all instructions show up roughly evenly: 9.51 │10: sqrtps %xmm1,%xmm0 11.74 │ sqrtps %xmm1,%xmm0 11.84 │ sqrtps %xmm1,%xmm0 6.05 │ sqrtps %xmm1,%xmm0 10.46 │ sqrtps %xmm1,%xmm0 12.25 │ sqrtps %xmm1,%xmm0 12.18 │ sqrtps %xmm1,%xmm0 5.26 │ sqrtps %xmm1,%xmm0 10.13 │ sqrtps %xmm1,%xmm0 10.43 │ sqrtps %xmm1,%xmm0 0.16 │ ↑ jmp 10 Even with PREC_DIST there is still sampling skid and the result is not completely even, but systematic shadow effects are significantly reduced. The improvements are mainly expected to make a difference in high IPC code. With low IPC it should be similar. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1448929689-13771-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-04 14:50:52 +03:00
/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x41d0, 0xf), /* MEM_UOPS_RETIRED.SPLIT_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x81d0, 0xf), /* MEM_UOPS_RETIRED.ALL_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XST(0x12d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_STORES */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XST(0x42d0, 0xf), /* MEM_UOPS_RETIRED.SPLIT_STORES */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XST(0x82d0, 0xf), /* MEM_UOPS_RETIRED.ALL_STORES */
INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_XLD(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_XLD(0xd2, 0xf), /* MEM_LOAD_UOPS_L3_HIT_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_XLD(0xd3, 0xf), /* MEM_LOAD_UOPS_L3_MISS_RETIRED.* */
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
EVENT_CONSTRAINT_END
};
struct event_constraint intel_skl_pebs_event_constraints[] = {
INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2), /* INST_RETIRED.PREC_DIST */
perf/x86: Use INST_RETIRED.PREC_DIST for cycles: ppp Add a new 'three-p' precise level, that uses INST_RETIRED.PREC_DIST as base. The basic mechanism of abusing the inverse cmask to get all cycles works the same as before. PREC_DIST is available on Sandy Bridge or later. It had some problems on Sandy Bridge, so we only use it on IvyBridge and later. I tested it on Broadwell and Skylake. PREC_DIST has special support for avoiding shadow effects, which can give better results compare to UOPS_RETIRED. The drawback is that PREC_DIST can only schedule on counter 1, but that is ok for cycle sampling, as there is normally no need to do multiple cycle sampling runs in parallel. It is still possible to run perf top in parallel, as that doesn't use precise mode. Also of course the multiplexing can still allow parallel operation. :pp stays with the previous event. Example: Sample a loop with 10 sqrt with old cycles:pp 0.14 │10: sqrtps %xmm1,%xmm0 <-------------- 9.13 │ sqrtps %xmm1,%xmm0 11.58 │ sqrtps %xmm1,%xmm0 11.51 │ sqrtps %xmm1,%xmm0 6.27 │ sqrtps %xmm1,%xmm0 10.38 │ sqrtps %xmm1,%xmm0 12.20 │ sqrtps %xmm1,%xmm0 12.74 │ sqrtps %xmm1,%xmm0 5.40 │ sqrtps %xmm1,%xmm0 10.14 │ sqrtps %xmm1,%xmm0 10.51 │ ↑ jmp 10 We expect all 10 sqrt to get roughly the sample number of samples. But you can see that the instruction directly after the JMP is systematically underestimated in the result, due to sampling shadow effects. With the new PREC_DIST based sampling this problem is gone and all instructions show up roughly evenly: 9.51 │10: sqrtps %xmm1,%xmm0 11.74 │ sqrtps %xmm1,%xmm0 11.84 │ sqrtps %xmm1,%xmm0 6.05 │ sqrtps %xmm1,%xmm0 10.46 │ sqrtps %xmm1,%xmm0 12.25 │ sqrtps %xmm1,%xmm0 12.18 │ sqrtps %xmm1,%xmm0 5.26 │ sqrtps %xmm1,%xmm0 10.13 │ sqrtps %xmm1,%xmm0 10.43 │ sqrtps %xmm1,%xmm0 0.16 │ ↑ jmp 10 Even with PREC_DIST there is still sampling skid and the result is not completely even, but systematic shadow effects are significantly reduced. The improvements are mainly expected to make a difference in high IPC code. With low IPC it should be similar. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1448929689-13771-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-04 14:50:52 +03:00
/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
perf/x86: Use INST_RETIRED.TOTAL_CYCLES_PS for cycles:pp for Skylake I added UOPS_RETIRED.ALL by mistake to the Skylake PEBS event list for cycles:pp. But the event is not documented for Skylake, and has some issues. The recommended replacement for cycles:pp is to use INST_RETIRED.ANY+pebs as a base, similar to what CPUs before Sandy Bridge did. This new event is called INST_RETIRED.TOTAL_CYCLES_PS. The event is not really new, but has been already used by perf before Sandy Bridge for the original cycles:p Note the SDM doesn't document that event either, but it's being documented in the latest version of the event list on: https://download.01.org/perfmon/SKL This patch does: - Remove UOPS_RETIRED.ALL from the Skylake PEBS event list - Add INST_RETIRED.ANY to the Skylake PEBS event list, and an table entry to allow cmask=16,inv=1 for cycles:pp - We don't need an extra entry for the base INST_RETIRED event, because it is already covered by the catch-all PEBS table entry. - Switch Skylake to use the Core2 PEBS alias (which is INST_RETIRED.TOTAL_CYCLES_PS) Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: hpa@zytor.com Link: http://lkml.kernel.org/r/1448929689-13771-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-12-04 14:50:32 +03:00
/* INST_RETIRED.TOTAL_CYCLES_PS (inv=1, cmask=16) (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
INTEL_PLD_CONSTRAINT(0x1cd, 0xf), /* MEM_TRANS_RETIRED.* */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_STORES */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x21d0, 0xf), /* MEM_INST_RETIRED.LOCK_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x22d0, 0xf), /* MEM_INST_RETIRED.LOCK_STORES */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x41d0, 0xf), /* MEM_INST_RETIRED.SPLIT_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x42d0, 0xf), /* MEM_INST_RETIRED.SPLIT_STORES */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x81d0, 0xf), /* MEM_INST_RETIRED.ALL_LOADS */
INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x82d0, 0xf), /* MEM_INST_RETIRED.ALL_STORES */
INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_LD(0xd1, 0xf), /* MEM_LOAD_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_LD(0xd2, 0xf), /* MEM_LOAD_L3_HIT_RETIRED.* */
INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_LD(0xd3, 0xf), /* MEM_LOAD_L3_MISS_RETIRED.* */
perf/x86: Revamp PEBS event selection The basic idea is that it does not make sense to list all PEBS events individually. The list is very long, sometimes outdated and the hardware doesn't need it. If an event does not support PEBS it will just not count, there is no security issue. We need to only list events that something special, like supporting load or store addresses. This vastly simplifies the PEBS event selection. It also speeds up the scheduling because the scheduler doesn't have to walk as many constraints. Bugs fixed: - We do not allow setting forbidden flags with PEBS anymore (SDM 18.9.4), except for the special cycle event. This is done using a new constraint macro that also matches on the event flags. - Correct DataLA and load/store/na flags reporting on Haswell [Requires a followon patch] - We did not allow all PEBS events on Haswell: We were missing some valid subevents in d1-d2 (MEM_LOAD_UOPS_RETIRED.*, MEM_LOAD_UOPS_RETIRED_L3_HIT_RETIRED.*) This includes the changes proposed by Stephane earlier and obsoletes his patchkit (except for some changes on pre Sandy Bridge/Silvermont CPUs) I only did Sandy Bridge and Silvermont and later so far, mostly because these are the parts I could directly confirm the hardware behavior with hardware architects. Also I do not believe the older CPUs have any missing events in their PEBS list, so there's no pressing need to change them. I did not implement the flag proposed by Peter to allow setting forbidden flags. If really needed this could be implemented on to of this patch. v2: Fix broken store events on SNB/IVB (Stephane Eranian) v3: More fixes. Rename some arguments (Stephane Eranian) v4: List most Haswell events individually again to report memory operation type correctly. Add new flags to describe load/store/na for datala. Update description. Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1407785233-32193-2-git-send-email-eranian@google.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Mark Davies <junk@eslaf.co.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-11 23:27:10 +04:00
/* Allow all events as PEBS with no flags */
INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
EVENT_CONSTRAINT_END
};
struct event_constraint *intel_pebs_constraints(struct perf_event *event)
{
struct event_constraint *c;
if (!event->attr.precise_ip)
return NULL;
if (x86_pmu.pebs_constraints) {
for_each_event_constraint(c, x86_pmu.pebs_constraints) {
if ((event->hw.config & c->cmask) == c->code) {
event->hw.flags |= c->flags;
return c;
}
}
}
return &emptyconstraint;
}
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
static inline bool pebs_is_enabled(struct cpu_hw_events *cpuc)
{
return (cpuc->pebs_enabled & ((1ULL << MAX_PEBS_EVENTS) - 1));
}
void intel_pmu_pebs_enable(struct perf_event *event)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
struct debug_store *ds = cpuc->ds;
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
bool first_pebs;
u64 threshold;
hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT;
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
first_pebs = !pebs_is_enabled(cpuc);
cpuc->pebs_enabled |= 1ULL << hwc->idx;
if (event->hw.flags & PERF_X86_EVENT_PEBS_LDLAT)
cpuc->pebs_enabled |= 1ULL << (hwc->idx + 32);
else if (event->hw.flags & PERF_X86_EVENT_PEBS_ST)
cpuc->pebs_enabled |= 1ULL << 63;
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
/*
* When the event is constrained enough we can use a larger
* threshold and run the event with less frequent PMI.
*/
if (hwc->flags & PERF_X86_EVENT_FREERUNNING) {
threshold = ds->pebs_absolute_maximum -
x86_pmu.max_pebs_events * x86_pmu.pebs_record_size;
if (first_pebs)
perf_sched_cb_inc(event->ctx->pmu);
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
} else {
threshold = ds->pebs_buffer_base + x86_pmu.pebs_record_size;
/*
* If not all events can use larger buffer,
* roll back to threshold = 1
*/
if (!first_pebs &&
(ds->pebs_interrupt_threshold > threshold))
perf_sched_cb_dec(event->ctx->pmu);
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
}
/* Use auto-reload if possible to save a MSR write in the PMI */
if (hwc->flags & PERF_X86_EVENT_AUTO_RELOAD) {
ds->pebs_event_reset[hwc->idx] =
(u64)(-hwc->sample_period) & x86_pmu.cntval_mask;
}
perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold) PEBS always had the capability to log samples to its buffers without an interrupt. Traditionally perf has not used this but always set the PEBS threshold to one. For frequently occurring events (like cycles or branches or load/store) this in term requires using a relatively high sampling period to avoid overloading the system, by only processing PMIs. This in term increases sampling error. For the common cases we still need to use the PMI because the PEBS hardware has various limitations. The biggest one is that it can not supply a callgraph. It also requires setting a fixed period, as the hardware does not support adaptive period. Another issue is that it cannot supply a time stamp and some other options. To supply a TID it requires flushing on context switch. It can however supply the IP, the load/store address, TSX information, registers, and some other things. So we can make PEBS work for some specific cases, basically as long as you can do without a callgraph and can set the period you can use this new PEBS mode. The main benefit is the ability to support much lower sampling period (down to -c 1000) without extensive overhead. One use cases is for example to increase the resolution of the c2c tool. Another is double checking when you suspect the standard sampling has too much sampling error. Some numbers on the overhead, using cycle soak, comparing the elapsed time from "kernbench -M -H" between plain (threshold set to one) and multi (large threshold). The test command for plain: "perf record --time -e cycles:p -c $period -- kernbench -M -H" The test command for multi: "perf record --no-time -e cycles:p -c $period -- kernbench -M -H" ( The only difference of test command between multi and plain is time stamp options. Since time stamp is not supported by large PEBS threshold, it can be used as a flag to indicate if large threshold is enabled during the test. ) period plain(Sec) multi(Sec) Delta 10003 32.7 16.5 16.2 20003 30.2 16.2 14.0 40003 18.6 14.1 4.5 80003 16.8 14.6 2.2 100003 16.9 14.1 2.8 800003 15.4 15.7 -0.3 1000003 15.3 15.2 0.2 2000003 15.3 15.1 0.1 With periods below 100003, plain (threshold one) cause much more overhead. With 10003 sampling period, the Elapsed Time for multi is even 2X faster than plain. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:50 +03:00
if (first_pebs || ds->pebs_interrupt_threshold > threshold)
ds->pebs_interrupt_threshold = threshold;
}
void intel_pmu_pebs_disable(struct perf_event *event)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
struct debug_store *ds = cpuc->ds;
bool large_pebs = ds->pebs_interrupt_threshold >
ds->pebs_buffer_base + x86_pmu.pebs_record_size;
if (large_pebs)
intel_pmu_drain_pebs_buffer();
cpuc->pebs_enabled &= ~(1ULL << hwc->idx);
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 11:57:13 +03:00
if (event->hw.flags & PERF_X86_EVENT_PEBS_LDLAT)
cpuc->pebs_enabled &= ~(1ULL << (hwc->idx + 32));
perf/x86: Fix event/group validation Commit 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b4578071c0 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b1b15 ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-21 11:57:13 +03:00
else if (event->hw.flags & PERF_X86_EVENT_PEBS_ST)
cpuc->pebs_enabled &= ~(1ULL << 63);
if (large_pebs && !pebs_is_enabled(cpuc))
perf_sched_cb_dec(event->ctx->pmu);
if (cpuc->enabled)
wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled);
hwc->config |= ARCH_PERFMON_EVENTSEL_INT;
}
void intel_pmu_pebs_enable_all(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
if (cpuc->pebs_enabled)
wrmsrl(MSR_IA32_PEBS_ENABLE, cpuc->pebs_enabled);
}
void intel_pmu_pebs_disable_all(void)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
if (cpuc->pebs_enabled)
wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
}
static int intel_pmu_pebs_fixup_ip(struct pt_regs *regs)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
unsigned long from = cpuc->lbr_entries[0].from;
unsigned long old_to, to = cpuc->lbr_entries[0].to;
unsigned long ip = regs->ip;
int is_64bit = 0;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
void *kaddr;
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
int size;
/*
* We don't need to fixup if the PEBS assist is fault like
*/
if (!x86_pmu.intel_cap.pebs_trap)
return 1;
/*
* No LBR entry, no basic block, no rewinding
*/
if (!cpuc->lbr_stack.nr || !from || !to)
return 0;
/*
* Basic blocks should never cross user/kernel boundaries
*/
if (kernel_ip(ip) != kernel_ip(to))
return 0;
/*
* unsigned math, either ip is before the start (impossible) or
* the basic block is larger than 1 page (sanity)
*/
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
if ((ip - to) > PEBS_FIXUP_SIZE)
return 0;
/*
* We sampled a branch insn, rewind using the LBR stack
*/
if (ip == to) {
set_linear_ip(regs, from);
return 1;
}
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
size = ip - to;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
if (!kernel_ip(ip)) {
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
int bytes;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
u8 *buf = this_cpu_read(insn_buffer);
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
/* 'size' must fit our buffer, see above */
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
bytes = copy_from_user_nmi(buf, (void __user *)to, size);
if (bytes != 0)
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
return 0;
kaddr = buf;
} else {
kaddr = (void *)to;
}
do {
struct insn insn;
old_to = to;
#ifdef CONFIG_X86_64
is_64bit = kernel_ip(to) || !test_thread_flag(TIF_IA32);
#endif
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
insn_init(&insn, kaddr, size, is_64bit);
insn_get_length(&insn);
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
/*
* Make sure there was not a problem decoding the
* instruction and getting the length. This is
* doubly important because we have an infinite
* loop if insn.length=0.
*/
if (!insn.length)
break;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
to += insn.length;
perf/x86: Optimize intel_pmu_pebs_fixup_ip() There's been reports of high NMI handler overhead, highlighted by such kernel messages: [ 3697.380195] perf samples too long (10009 > 10000), lowering kernel.perf_event_max_sample_rate to 13000 [ 3697.389509] INFO: NMI handler (perf_event_nmi_handler) took too long to run: 9.331 msecs Don Zickus analyzed the source of the overhead and reported: > While there are a few places that are causing latencies, for now I focused on > the longest one first. It seems to be 'copy_user_from_nmi' > > intel_pmu_handle_irq -> > intel_pmu_drain_pebs_nhm -> > __intel_pmu_drain_pebs_nhm -> > __intel_pmu_pebs_event -> > intel_pmu_pebs_fixup_ip -> > copy_from_user_nmi > > In intel_pmu_pebs_fixup_ip(), if the while-loop goes over 50, the sum of > all the copy_from_user_nmi latencies seems to go over 1,000,000 cycles > (there are some cases where only 10 iterations are needed to go that high > too, but in generall over 50 or so). At this point copy_user_from_nmi > seems to account for over 90% of the nmi latency. The solution to that is to avoid having to call copy_from_user_nmi() for every instruction. Since we already limit the max basic block size, we can easily pre-allocate a piece of memory to copy the entire thing into in one go. Don reported this test result: > Your patch made a huge difference in improvement. The > copy_from_user_nmi() no longer hits the million of cycles. I still > have a batch of 100,000-300,000 cycles. My longest NMI paths used > to be dominated by copy_from_user_nmi, now it is not (I have to dig > up the new hot path). Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20131016105755.GX10651@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-15 14:14:04 +04:00
kaddr += insn.length;
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 18:39:57 +03:00
size -= insn.length;
} while (to < ip);
if (to == ip) {
set_linear_ip(regs, old_to);
return 1;
}
/*
* Even though we decoded the basic block, the instruction stream
* never matched the given IP, either the TO or the IP got corrupted.
*/
return 0;
}
static inline u64 intel_hsw_weight(struct pebs_record_skl *pebs)
{
if (pebs->tsx_tuning) {
union hsw_tsx_tuning tsx = { .value = pebs->tsx_tuning };
return tsx.cycles_last_block;
}
return 0;
}
static inline u64 intel_hsw_transaction(struct pebs_record_skl *pebs)
{
u64 txn = (pebs->tsx_tuning & PEBS_HSW_TSX_FLAGS) >> 32;
/* For RTM XABORTs also log the abort code from AX */
if ((txn & PERF_TXN_TRANSACTION) && (pebs->ax & 1))
txn |= ((pebs->ax >> 24) & 0xff) << PERF_TXN_ABORT_SHIFT;
return txn;
}
static void setup_pebs_sample_data(struct perf_event *event,
struct pt_regs *iregs, void *__pebs,
struct perf_sample_data *data,
struct pt_regs *regs)
{
#define PERF_X86_EVENT_PEBS_HSW_PREC \
(PERF_X86_EVENT_PEBS_ST_HSW | \
PERF_X86_EVENT_PEBS_LD_HSW | \
PERF_X86_EVENT_PEBS_NA_HSW)
/*
* We cast to the biggest pebs_record but are careful not to
* unconditionally access the 'extra' entries.
*/
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct pebs_record_skl *pebs = __pebs;
u64 sample_type;
int fll, fst, dsrc;
int fl = event->hw.flags;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
if (pebs == NULL)
return;
sample_type = event->attr.sample_type;
dsrc = sample_type & PERF_SAMPLE_DATA_SRC;
fll = fl & PERF_X86_EVENT_PEBS_LDLAT;
fst = fl & (PERF_X86_EVENT_PEBS_ST | PERF_X86_EVENT_PEBS_HSW_PREC);
perf_sample_data_init(data, 0, event->hw.last_period);
data->period = event->hw.last_period;
/*
* Use latency for weight (only avail with PEBS-LL)
*/
if (fll && (sample_type & PERF_SAMPLE_WEIGHT))
data->weight = pebs->lat;
/*
* data.data_src encodes the data source
*/
if (dsrc) {
u64 val = PERF_MEM_NA;
if (fll)
val = load_latency_data(pebs->dse);
else if (fst && (fl & PERF_X86_EVENT_PEBS_HSW_PREC))
val = precise_datala_hsw(event, pebs->dse);
else if (fst)
val = precise_store_data(pebs->dse);
data->data_src.val = val;
}
/*
* We use the interrupt regs as a base because the PEBS record
* does not contain a full regs set, specifically it seems to
* lack segment descriptors, which get used by things like
* user_mode().
*
* In the simple case fix up only the IP and BP,SP regs, for
* PERF_SAMPLE_IP and PERF_SAMPLE_CALLCHAIN to function properly.
* A possible PERF_SAMPLE_REGS will have to transfer all regs.
*/
*regs = *iregs;
regs->flags = pebs->flags;
set_linear_ip(regs, pebs->ip);
regs->bp = pebs->bp;
regs->sp = pebs->sp;
if (sample_type & PERF_SAMPLE_REGS_INTR) {
regs->ax = pebs->ax;
regs->bx = pebs->bx;
regs->cx = pebs->cx;
regs->dx = pebs->dx;
regs->si = pebs->si;
regs->di = pebs->di;
regs->bp = pebs->bp;
regs->sp = pebs->sp;
regs->flags = pebs->flags;
#ifndef CONFIG_X86_32
regs->r8 = pebs->r8;
regs->r9 = pebs->r9;
regs->r10 = pebs->r10;
regs->r11 = pebs->r11;
regs->r12 = pebs->r12;
regs->r13 = pebs->r13;
regs->r14 = pebs->r14;
regs->r15 = pebs->r15;
#endif
}
if (event->attr.precise_ip > 1 && x86_pmu.intel_cap.pebs_format >= 2) {
regs->ip = pebs->real_ip;
regs->flags |= PERF_EFLAGS_EXACT;
} else if (event->attr.precise_ip > 1 && intel_pmu_pebs_fixup_ip(regs))
regs->flags |= PERF_EFLAGS_EXACT;
else
regs->flags &= ~PERF_EFLAGS_EXACT;
if ((sample_type & PERF_SAMPLE_ADDR) &&
x86_pmu.intel_cap.pebs_format >= 1)
data->addr = pebs->dla;
if (x86_pmu.intel_cap.pebs_format >= 2) {
/* Only set the TSX weight when no memory weight. */
if ((sample_type & PERF_SAMPLE_WEIGHT) && !fll)
data->weight = intel_hsw_weight(pebs);
if (sample_type & PERF_SAMPLE_TRANSACTION)
data->txn = intel_hsw_transaction(pebs);
}
/*
* v3 supplies an accurate time stamp, so we use that
* for the time stamp.
*
* We can only do this for the default trace clock.
*/
if (x86_pmu.intel_cap.pebs_format >= 3 &&
event->attr.use_clockid == 0)
data->time = native_sched_clock_from_tsc(pebs->tsc);
if (has_branch_stack(event))
data->br_stack = &cpuc->lbr_stack;
}
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
static inline void *
get_next_pebs_record_by_bit(void *base, void *top, int bit)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
void *at;
u64 pebs_status;
/*
* fmt0 does not have a status bitfield (does not use
* perf_record_nhm format)
*/
if (x86_pmu.intel_cap.pebs_format < 1)
return base;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
if (base == NULL)
return NULL;
for (at = base; at < top; at += x86_pmu.pebs_record_size) {
struct pebs_record_nhm *p = at;
if (test_bit(bit, (unsigned long *)&p->status)) {
/* PEBS v3 has accurate status bits */
if (x86_pmu.intel_cap.pebs_format >= 3)
return at;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
if (p->status == (1 << bit))
return at;
/* clear non-PEBS bit and re-check */
pebs_status = p->status & cpuc->pebs_enabled;
pebs_status &= (1ULL << MAX_PEBS_EVENTS) - 1;
if (pebs_status == (1 << bit))
return at;
}
}
return NULL;
}
static void __intel_pmu_pebs_event(struct perf_event *event,
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
struct pt_regs *iregs,
void *base, void *top,
int bit, int count)
{
struct perf_sample_data data;
struct pt_regs regs;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
void *at = get_next_pebs_record_by_bit(base, top, bit);
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
if (!intel_pmu_save_and_restart(event) &&
!(event->hw.flags & PERF_X86_EVENT_AUTO_RELOAD))
return;
while (count > 1) {
setup_pebs_sample_data(event, iregs, at, &data, &regs);
perf_event_output(event, &data, &regs);
at += x86_pmu.pebs_record_size;
at = get_next_pebs_record_by_bit(at, top, bit);
count--;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
}
setup_pebs_sample_data(event, iregs, at, &data, &regs);
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
/*
* All but the last records are processed.
* The last one is left to be able to call the overflow handler.
*/
if (perf_event_overflow(event, &data, &regs)) {
2010-06-16 16:37:10 +04:00
x86_pmu_stop(event, 0);
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
return;
}
}
static void intel_pmu_drain_pebs_core(struct pt_regs *iregs)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct debug_store *ds = cpuc->ds;
struct perf_event *event = cpuc->events[0]; /* PMC0 only */
struct pebs_record_core *at, *top;
int n;
if (!x86_pmu.pebs_active)
return;
at = (struct pebs_record_core *)(unsigned long)ds->pebs_buffer_base;
top = (struct pebs_record_core *)(unsigned long)ds->pebs_index;
/*
* Whatever else happens, drain the thing
*/
ds->pebs_index = ds->pebs_buffer_base;
if (!test_bit(0, cpuc->active_mask))
return;
WARN_ON_ONCE(!event);
if (!event->attr.precise_ip)
return;
n = top - at;
if (n <= 0)
return;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
__intel_pmu_pebs_event(event, iregs, at, top, 0, n);
}
static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
{
x86: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Acked-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 21:30:40 +04:00
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct debug_store *ds = cpuc->ds;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
struct perf_event *event;
void *base, *at, *top;
short counts[MAX_PEBS_EVENTS] = {};
short error[MAX_PEBS_EVENTS] = {};
int bit, i;
if (!x86_pmu.pebs_active)
return;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
base = (struct pebs_record_nhm *)(unsigned long)ds->pebs_buffer_base;
top = (struct pebs_record_nhm *)(unsigned long)ds->pebs_index;
ds->pebs_index = ds->pebs_buffer_base;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
if (unlikely(base >= top))
return;
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
for (at = base; at < top; at += x86_pmu.pebs_record_size) {
struct pebs_record_nhm *p = at;
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
u64 pebs_status;
/* PEBS v3 has accurate status bits */
if (x86_pmu.intel_cap.pebs_format >= 3) {
for_each_set_bit(bit, (unsigned long *)&p->status,
MAX_PEBS_EVENTS)
counts[bit]++;
continue;
}
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
pebs_status = p->status & cpuc->pebs_enabled;
pebs_status &= (1ULL << x86_pmu.max_pebs_events) - 1;
/*
* On some CPUs the PEBS status can be zero when PEBS is
* racing with clearing of GLOBAL_STATUS.
*
* Normally we would drop that record, but in the
* case when there is only a single active PEBS event
* we can assume it's for that event.
*/
if (!pebs_status && cpuc->pebs_enabled &&
!(cpuc->pebs_enabled & (cpuc->pebs_enabled-1)))
pebs_status = cpuc->pebs_enabled;
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
bit = find_first_bit((unsigned long *)&pebs_status,
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
x86_pmu.max_pebs_events);
if (bit >= x86_pmu.max_pebs_events)
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
continue;
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
/*
* The PEBS hardware does not deal well with the situation
* when events happen near to each other and multiple bits
* are set. But it should happen rarely.
*
* If these events include one PEBS and multiple non-PEBS
* events, it doesn't impact PEBS record. The record will
* be handled normally. (slow path)
*
* If these events include two or more PEBS events, the
* records for the events can be collapsed into a single
* one, and it's not possible to reconstruct all events
* that caused the PEBS record. It's called collision.
* If collision happened, the record will be dropped.
*/
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
if (p->status != (1ULL << bit)) {
for_each_set_bit(i, (unsigned long *)&pebs_status,
x86_pmu.max_pebs_events)
error[i]++;
continue;
}
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
counts[bit]++;
}
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) {
if ((counts[bit] == 0) && (error[bit] == 0))
continue;
perf/x86/intel/pebs: Robustify PEBS buffer drain Vince Weaver and Stephane Eranian reported warnings in the PEBS code when running the perf fuzzer. Stephane wrote: > I can reproduce the problem on my HSW running the fuzzer. > > I can see why this could be happening if you are mixing PEBS and non PEBS events > in the bottom 4 counters. I suspect: > for (bit = 0; bit < x86_pmu.max_pebs_events; bit++) { > if ((counts[bit] == 0) && (error[bit] == 0)) > continue; > > This test is not correct when you have non-PEBS events mixed with > PEBS events and they overflow at the same time. They will have > counts[i] != 0 but error[i] == 0, and thus you fall thru the loop > and hit the assert. Or it is something along those lines. The only way I can make this work is if ->status only has !PEBS events set, because if it has both set we'll take that slow path which masks out the !PEBS bits. After masking there are 3 options: - there is one bit set, and its @bit, we increment counts[bit]. - there are multiple bits set, we increment error[] for each set bit, we do not increment counts[]. - there are no bits set, we do nothing. The intent was to never increment counts[] for !PEBS events. Now if we start out with only a single !PEBS event set, we'll pass the test and increment counts[] for a !PEBS and hit the warn. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-15 15:35:46 +03:00
perf/x86/intel: Handle multiple records in the PEBS buffer When the PEBS interrupt threshold is larger than one record and the machine supports multiple PEBS events, the records of these events are mixed up and we need to demultiplex them. Demuxing the records is hard because the hardware is deficient. The hardware has two issues that, when combined, create impossible scenarios to demux. The first issue is that the 'status' field of the PEBS record is a copy of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a problem let us first describe the regular PEBS cycle: A) the CTRn value reaches 0: - the corresponding bit in GLOBAL_STATUS gets set - we start arming the hardware assist < some unspecified amount of time later -- this could cover multiple events of interest > B) the hardware assist is armed, any next event will trigger it C) a matching event happens: - the hardware assist triggers and generates a PEBS record this includes a copy of GLOBAL_STATUS at this moment - if we auto-reload we (re)set CTRn - we clear the relevant bit in GLOBAL_STATUS Now consider the following chain of events: A0, B0, A1, C0 The event generated for counter 0 will include a status with counter 1 set, even though its not at all related to the record. A similar thing can happen with a !PEBS event if it just happens to overflow at the right moment. The second issue is that the hardware will only emit one record for two or more counters if the event that triggers the assist is 'close'. The 'close' can be several cycles. In some cases even the complete assist, if the event is something that doesn't need retirement. For instance, consider this chain of events: A0, B0, A1, B1, C01 Where C01 is an event that triggers both hardware assists, we will generate but a single record, but again with both counters listed in the status field. This time the record pertains to both events. Note that these two cases are different but undistinguishable with the data as generated. Therefore demuxing records with multiple PEBS bits (we can safely ignore status bits for !PEBS counters) is impossible. Furthermore we cannot emit the record to both events because that might cause a data leak -- the events might not have the same privileges -- so what this patch does is discard such events. The assumption/hope is that such discards will be rare. Here lists some possible ways you may get high discard rate. - when you count the same thing multiple times. But it is not a useful configuration. - you can be unfortunate if you measure with a userspace only PEBS event along with either a kernel or unrestricted PEBS event. Imagine the event triggering and setting the overflow flag right before entering the kernel. Then all kernel side events will end up with multiple bits set. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Kan Liang <kan.liang@intel.com> [ Changelog improvements. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-06 22:33:49 +03:00
event = cpuc->events[bit];
WARN_ON_ONCE(!event);
WARN_ON_ONCE(!event->attr.precise_ip);
/* log dropped samples number */
if (error[bit])
perf_log_lost_samples(event, error[bit]);
if (counts[bit]) {
__intel_pmu_pebs_event(event, iregs, base,
top, bit, counts[bit]);
}
}
}
/*
* BTS, PEBS probe and setup
*/
void __init intel_ds_init(void)
{
/*
* No support for 32bit formats
*/
if (!boot_cpu_has(X86_FEATURE_DTES64))
return;
x86_pmu.bts = boot_cpu_has(X86_FEATURE_BTS);
x86_pmu.pebs = boot_cpu_has(X86_FEATURE_PEBS);
if (x86_pmu.pebs) {
char pebs_type = x86_pmu.intel_cap.pebs_trap ? '+' : '-';
int format = x86_pmu.intel_cap.pebs_format;
switch (format) {
case 0:
pr_cont("PEBS fmt0%c, ", pebs_type);
x86_pmu.pebs_record_size = sizeof(struct pebs_record_core);
x86_pmu.drain_pebs = intel_pmu_drain_pebs_core;
break;
case 1:
pr_cont("PEBS fmt1%c, ", pebs_type);
x86_pmu.pebs_record_size = sizeof(struct pebs_record_nhm);
x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
break;
case 2:
pr_cont("PEBS fmt2%c, ", pebs_type);
x86_pmu.pebs_record_size = sizeof(struct pebs_record_hsw);
x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
break;
case 3:
pr_cont("PEBS fmt3%c, ", pebs_type);
x86_pmu.pebs_record_size =
sizeof(struct pebs_record_skl);
x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
x86_pmu.free_running_flags |= PERF_SAMPLE_TIME;
break;
default:
pr_cont("no PEBS fmt%d%c, ", format, pebs_type);
x86_pmu.pebs = 0;
}
}
}
void perf_restore_debug_store(void)
{
struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
if (!x86_pmu.bts && !x86_pmu.pebs)
return;
wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds);
}