License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
|
* mm/mprotect.c
|
|
|
|
|
*
|
|
|
|
|
* (C) Copyright 1994 Linus Torvalds
|
|
|
|
|
* (C) Copyright 2002 Christoph Hellwig
|
|
|
|
|
*
|
2009-01-05 17:06:29 +03:00
|
|
|
* Address space accounting code <alan@lxorguk.ukuu.org.uk>
|
2005-04-17 02:20:36 +04:00
|
|
|
* (C) Copyright 2002 Red Hat Inc, All Rights Reserved
|
|
|
|
|
*/
|
|
|
|
|
|
2019-08-28 17:19:53 +03:00
|
|
|
#include <linux/pagewalk.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
#include <linux/hugetlb.h>
|
|
|
|
|
#include <linux/shm.h>
|
|
|
|
|
#include <linux/mman.h>
|
|
|
|
|
#include <linux/fs.h>
|
|
|
|
|
#include <linux/highmem.h>
|
|
|
|
|
#include <linux/security.h>
|
|
|
|
|
#include <linux/mempolicy.h>
|
|
|
|
|
#include <linux/personality.h>
|
|
|
|
|
#include <linux/syscalls.h>
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:35 +04:00
|
|
|
#include <linux/swap.h>
|
|
|
|
|
#include <linux/swapops.h>
|
mmu-notifiers: core
With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte". In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present). The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.
Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set. Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).
The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space. Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.
To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page. Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0. This is just an example.
This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).
At least for KVM without this patch it's impossible to swap guests
reliably. And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.
Dependencies:
1) mm_take_all_locks() to register the mmu notifier when the whole VM
isn't doing anything with "mm". This allows mmu notifier users to keep
track if the VM is in the middle of the invalidate_range_begin/end
critical section with an atomic counter incraese in range_begin and
decreased in range_end. No secondary MMU page fault is allowed to map
any spte or secondary tlb reference, while the VM is in the middle of
range_begin/end as any page returned by get_user_pages in that critical
section could later immediately be freed without any further
->invalidate_page notification (invalidate_range_begin/end works on
ranges and ->invalidate_page isn't called immediately before freeing
the page). To stop all page freeing and pagetable overwrites the
mmap_sem must be taken in write mode and all other anon_vma/i_mmap
locks must be taken too.
2) It'd be a waste to add branches in the VM if nobody could possibly
run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of
mmu notifiers, but this already allows to compile a KVM external module
against a kernel with mmu notifiers enabled and from the next pull from
kvm.git we'll start using them. And GRU/XPMEM will also be able to
continue the development by enabling KVM=m in their config, until they
submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can
also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
are all =n.
The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR. Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled. Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.
struct kvm *kvm_arch_create_vm(void)
{
struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+ int err;
if (!kvm)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);
+ kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops;
+ err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm);
+ if (err) {
+ kfree(kvm);
+ return ERR_PTR(err);
+ }
+
return kvm;
}
mmu_notifier_unregister returns void and it's reliable.
The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 02:46:29 +04:00
|
|
|
#include <linux/mmu_notifier.h>
|
2009-01-07 01:39:16 +03:00
|
|
|
#include <linux/migrate.h>
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:02:48 +04:00
|
|
|
#include <linux/perf_event.h>
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
#include <linux/pkeys.h>
|
2014-01-22 03:51:02 +04:00
|
|
|
#include <linux/ksm.h>
|
2016-12-24 22:46:01 +03:00
|
|
|
#include <linux/uaccess.h>
|
2018-04-11 02:29:20 +03:00
|
|
|
#include <linux/mm_inline.h>
|
2020-06-09 07:32:38 +03:00
|
|
|
#include <linux/pgtable.h>
|
2022-03-23 00:46:27 +03:00
|
|
|
#include <linux/sched/sysctl.h>
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
#include <linux/userfaultfd_k.h>
|
2022-08-18 16:10:41 +03:00
|
|
|
#include <linux/memory-tiers.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
#include <asm/cacheflush.h>
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
#include <asm/mmu_context.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
#include <asm/tlbflush.h>
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
#include <asm/tlb.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
|
mm: fix mprotect() behaviour on VM_LOCKED VMAs
On mlock(2) we trigger COW on private writable VMA to avoid faults in
future.
mm/gup.c:
840 long populate_vma_page_range(struct vm_area_struct *vma,
841 unsigned long start, unsigned long end, int *nonblocking)
842 {
...
855 * We want to touch writable mappings with a write fault in order
856 * to break COW, except for shared mappings because these don't COW
857 * and we would not want to dirty them for nothing.
858 */
859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE)
860 gup_flags |= FOLL_WRITE;
But we miss this case when we make VM_LOCKED VMA writeable via
mprotect(2). The test case:
#define _GNU_SOURCE
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/resource.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/types.h>
#define PAGE_SIZE 4096
int main(int argc, char **argv)
{
struct rusage usage;
long before;
char *p;
int fd;
/* Create a file and populate first page of page cache */
fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR);
write(fd, "1", 1);
/* Create a *read-only* *private* mapping of the file */
p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0);
/*
* Since the mapping is read-only, mlock() will populate the mapping
* with PTEs pointing to page cache without triggering COW.
*/
mlock(p, PAGE_SIZE);
/*
* Mapping became read-write, but it's still populated with PTEs
* pointing to page cache.
*/
mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE);
getrusage(RUSAGE_SELF, &usage);
before = usage.ru_minflt;
/* Trigger COW: fault in mlock()ed VMA. */
*p = 1;
getrusage(RUSAGE_SELF, &usage);
printf("faults: %ld\n", usage.ru_minflt - before);
return 0;
}
$ ./test
faults: 1
Let's fix it by triggering populating of VMA in mprotect_fixup() on this
condition. We don't care about population error as we don't in other
similar cases i.e. mremap.
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 02:56:10 +03:00
|
|
|
#include "internal.h"
|
|
|
|
|
|
2022-11-08 20:46:50 +03:00
|
|
|
bool can_change_pte_writable(struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
|
pte_t pte)
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
{
|
|
|
|
|
struct page *page;
|
|
|
|
|
|
2022-11-08 20:46:47 +03:00
|
|
|
if (WARN_ON_ONCE(!(vma->vm_flags & VM_WRITE)))
|
|
|
|
|
return false;
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
|
2022-11-08 20:46:47 +03:00
|
|
|
/* Don't touch entries that are not even readable. */
|
mm/mprotect: allow clean exclusive anon pages to be writable
Patch series "mm/autonuma: replace savedwrite infrastructure", v2.
As discussed in my talk at LPC, we can reuse the same mechanism for
deciding whether to map a pte writable when upgrading permissions via
mprotect() -- e.g., PROT_READ -> PROT_READ|PROT_WRITE -- to replace the
savedwrite infrastructure used for NUMA hinting faults (e.g., PROT_NONE ->
PROT_READ|PROT_WRITE).
Instead of maintaining previous write permissions for a pte/pmd, we
re-determine if the pte/pmd can be writable. The big benefit is that we
have a common logic for deciding whether we can map a pte/pmd writable on
protection changes.
For private mappings, there should be no difference -- from what I
understand, that is what autonuma benchmarks care about.
I ran autonumabench for v1 on a system with 2 NUMA nodes, 96 GiB each via:
perf stat --null --repeat 10
The numa01 benchmark is quite noisy in my environment and I failed to
reduce the noise so far.
numa01:
mm-unstable: 146.88 +- 6.54 seconds time elapsed ( +- 4.45% )
mm-unstable++: 147.45 +- 13.39 seconds time elapsed ( +- 9.08% )
numa02:
mm-unstable: 16.0300 +- 0.0624 seconds time elapsed ( +- 0.39% )
mm-unstable++: 16.1281 +- 0.0945 seconds time elapsed ( +- 0.59% )
It is worth noting that for shared writable mappings that require
writenotify, we will only avoid write faults if the pte/pmd is dirty
(inherited from the older mprotect logic). If we ever care about
optimizing that further, we'd need a different mechanism to identify
whether the FS still needs to get notified on the next write access.
In any case, such an optimization will then not be autonuma-specific, but
mprotect() permission upgrades would similarly benefit from it.
This patch (of 7):
Anonymous pages might have the dirty bit clear, but this should not
prevent mprotect from making them writable if they are exclusive.
Therefore, skip the test whether the page is dirty in this case.
Note that there are already other ways to get a writable PTE mapping an
anonymous page that is clean: for example, via MADV_FREE. In an ideal
world, we'd have a different indication from the FS whether writenotify is
still required.
[david@redhat.com: return directly; update description]
Link: https://lkml.kernel.org/r/20221108174652.198904-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221108174652.198904-2-david@redhat.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 20:46:46 +03:00
|
|
|
if (pte_protnone(pte))
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
return false;
|
|
|
|
|
|
|
|
|
|
/* Do we need write faults for softdirty tracking? */
|
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
Patch series "mm/mprotect: Fix soft-dirty checks", v4.
This patch (of 3):
The check wanted to make sure when soft-dirty tracking is enabled we won't
grant write bit by accident, as a page fault is needed for dirty tracking.
The intention is correct but we didn't check it right because
VM_SOFTDIRTY set actually means soft-dirty tracking disabled. Fix it.
There's another thing tricky about soft-dirty is that, we can't check the
vma flag !(vma_flags & VM_SOFTDIRTY) directly but only check it after we
checked CONFIG_MEM_SOFT_DIRTY because otherwise VM_SOFTDIRTY will be
defined as zero, and !(vma_flags & VM_SOFTDIRTY) will constantly return
true. To avoid misuse, introduce a helper for checking whether vma has
soft-dirty tracking enabled.
We can easily verify this with any exclusive anonymous page, like program
below:
=======8<======
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <assert.h>
#include <inttypes.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <fcntl.h>
#include <stdbool.h>
#define BIT_ULL(nr) (1ULL << (nr))
#define PM_SOFT_DIRTY BIT_ULL(55)
unsigned int psize;
char *page;
uint64_t pagemap_read_vaddr(int fd, void *vaddr)
{
uint64_t value;
int ret;
ret = pread(fd, &value, sizeof(uint64_t),
((uint64_t)vaddr >> 12) * sizeof(uint64_t));
assert(ret == sizeof(uint64_t));
return value;
}
void clear_refs_write(void)
{
int fd = open("/proc/self/clear_refs", O_RDWR);
assert(fd >= 0);
write(fd, "4", 2);
close(fd);
}
#define check_soft_dirty(str, expect) do { \
bool dirty = pagemap_read_vaddr(fd, page) & PM_SOFT_DIRTY; \
if (dirty != expect) { \
printf("ERROR: %s, soft-dirty=%d (expect: %d)
", str, dirty, expect); \
exit(-1); \
} \
} while (0)
int main(void)
{
int fd = open("/proc/self/pagemap", O_RDONLY);
assert(fd >= 0);
psize = getpagesize();
page = mmap(NULL, psize, PROT_READ|PROT_WRITE,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
assert(page != MAP_FAILED);
*page = 1;
check_soft_dirty("Just faulted in page", 1);
clear_refs_write();
check_soft_dirty("Clear_refs written", 0);
mprotect(page, psize, PROT_READ);
check_soft_dirty("Marked RO", 0);
mprotect(page, psize, PROT_READ|PROT_WRITE);
check_soft_dirty("Marked RW", 0);
*page = 2;
check_soft_dirty("Wrote page again", 1);
munmap(page, psize);
close(fd);
printf("Test passed.
");
return 0;
}
=======8<======
Here we attach a Fixes to commit 64fe24a3e05e only for easy tracking, as
this patch won't apply to a tree before that point. However the commit
wasn't the source of problem, but instead 64e455079e1b. It's just that
after 64fe24a3e05e anonymous memory will also suffer from this problem
with mprotect().
Link: https://lkml.kernel.org/r/20220725142048.30450-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220725142048.30450-2-peterx@redhat.com
Fixes: 64e455079e1b ("mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared")
Fixes: 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-25 17:20:46 +03:00
|
|
|
if (vma_soft_dirty_enabled(vma) && !pte_soft_dirty(pte))
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
return false;
|
|
|
|
|
|
|
|
|
|
/* Do we need write faults for uffd-wp tracking? */
|
|
|
|
|
if (userfaultfd_pte_wp(vma, pte))
|
|
|
|
|
return false;
|
|
|
|
|
|
|
|
|
|
if (!(vma->vm_flags & VM_SHARED)) {
|
|
|
|
|
/*
|
2022-11-08 20:46:47 +03:00
|
|
|
* Writable MAP_PRIVATE mapping: We can only special-case on
|
|
|
|
|
* exclusive anonymous pages, because we know that our
|
|
|
|
|
* write-fault handler similarly would map them writable without
|
|
|
|
|
* any additional checks while holding the PT lock.
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
*/
|
|
|
|
|
page = vm_normal_page(vma, addr, pte);
|
mm/mprotect: allow clean exclusive anon pages to be writable
Patch series "mm/autonuma: replace savedwrite infrastructure", v2.
As discussed in my talk at LPC, we can reuse the same mechanism for
deciding whether to map a pte writable when upgrading permissions via
mprotect() -- e.g., PROT_READ -> PROT_READ|PROT_WRITE -- to replace the
savedwrite infrastructure used for NUMA hinting faults (e.g., PROT_NONE ->
PROT_READ|PROT_WRITE).
Instead of maintaining previous write permissions for a pte/pmd, we
re-determine if the pte/pmd can be writable. The big benefit is that we
have a common logic for deciding whether we can map a pte/pmd writable on
protection changes.
For private mappings, there should be no difference -- from what I
understand, that is what autonuma benchmarks care about.
I ran autonumabench for v1 on a system with 2 NUMA nodes, 96 GiB each via:
perf stat --null --repeat 10
The numa01 benchmark is quite noisy in my environment and I failed to
reduce the noise so far.
numa01:
mm-unstable: 146.88 +- 6.54 seconds time elapsed ( +- 4.45% )
mm-unstable++: 147.45 +- 13.39 seconds time elapsed ( +- 9.08% )
numa02:
mm-unstable: 16.0300 +- 0.0624 seconds time elapsed ( +- 0.39% )
mm-unstable++: 16.1281 +- 0.0945 seconds time elapsed ( +- 0.59% )
It is worth noting that for shared writable mappings that require
writenotify, we will only avoid write faults if the pte/pmd is dirty
(inherited from the older mprotect logic). If we ever care about
optimizing that further, we'd need a different mechanism to identify
whether the FS still needs to get notified on the next write access.
In any case, such an optimization will then not be autonuma-specific, but
mprotect() permission upgrades would similarly benefit from it.
This patch (of 7):
Anonymous pages might have the dirty bit clear, but this should not
prevent mprotect from making them writable if they are exclusive.
Therefore, skip the test whether the page is dirty in this case.
Note that there are already other ways to get a writable PTE mapping an
anonymous page that is clean: for example, via MADV_FREE. In an ideal
world, we'd have a different indication from the FS whether writenotify is
still required.
[david@redhat.com: return directly; update description]
Link: https://lkml.kernel.org/r/20221108174652.198904-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221108174652.198904-2-david@redhat.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 20:46:46 +03:00
|
|
|
return page && PageAnon(page) && PageAnonExclusive(page);
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
}
|
|
|
|
|
|
2022-11-08 20:46:47 +03:00
|
|
|
/*
|
|
|
|
|
* Writable MAP_SHARED mapping: "clean" might indicate that the FS still
|
|
|
|
|
* needs a real write-fault for writenotify
|
|
|
|
|
* (see vma_wants_writenotify()). If "dirty", the assumption is that the
|
|
|
|
|
* FS was already notified and we can simply mark the PTE writable
|
|
|
|
|
* just like the write-fault handler would do.
|
|
|
|
|
*/
|
mm/mprotect: allow clean exclusive anon pages to be writable
Patch series "mm/autonuma: replace savedwrite infrastructure", v2.
As discussed in my talk at LPC, we can reuse the same mechanism for
deciding whether to map a pte writable when upgrading permissions via
mprotect() -- e.g., PROT_READ -> PROT_READ|PROT_WRITE -- to replace the
savedwrite infrastructure used for NUMA hinting faults (e.g., PROT_NONE ->
PROT_READ|PROT_WRITE).
Instead of maintaining previous write permissions for a pte/pmd, we
re-determine if the pte/pmd can be writable. The big benefit is that we
have a common logic for deciding whether we can map a pte/pmd writable on
protection changes.
For private mappings, there should be no difference -- from what I
understand, that is what autonuma benchmarks care about.
I ran autonumabench for v1 on a system with 2 NUMA nodes, 96 GiB each via:
perf stat --null --repeat 10
The numa01 benchmark is quite noisy in my environment and I failed to
reduce the noise so far.
numa01:
mm-unstable: 146.88 +- 6.54 seconds time elapsed ( +- 4.45% )
mm-unstable++: 147.45 +- 13.39 seconds time elapsed ( +- 9.08% )
numa02:
mm-unstable: 16.0300 +- 0.0624 seconds time elapsed ( +- 0.39% )
mm-unstable++: 16.1281 +- 0.0945 seconds time elapsed ( +- 0.59% )
It is worth noting that for shared writable mappings that require
writenotify, we will only avoid write faults if the pte/pmd is dirty
(inherited from the older mprotect logic). If we ever care about
optimizing that further, we'd need a different mechanism to identify
whether the FS still needs to get notified on the next write access.
In any case, such an optimization will then not be autonuma-specific, but
mprotect() permission upgrades would similarly benefit from it.
This patch (of 7):
Anonymous pages might have the dirty bit clear, but this should not
prevent mprotect from making them writable if they are exclusive.
Therefore, skip the test whether the page is dirty in this case.
Note that there are already other ways to get a writable PTE mapping an
anonymous page that is clean: for example, via MADV_FREE. In an ideal
world, we'd have a different indication from the FS whether writenotify is
still required.
[david@redhat.com: return directly; update description]
Link: https://lkml.kernel.org/r/20221108174652.198904-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221108174652.198904-2-david@redhat.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 20:46:46 +03:00
|
|
|
return pte_dirty(pte);
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
}
|
|
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
static unsigned long change_pte_range(struct mmu_gather *tlb,
|
|
|
|
|
struct vm_area_struct *vma, pmd_t *pmd, unsigned long addr,
|
|
|
|
|
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:35 +04:00
|
|
|
pte_t *pte, oldpte;
|
2005-10-30 04:16:27 +03:00
|
|
|
spinlock_t *ptl;
|
2012-11-19 06:14:23 +04:00
|
|
|
unsigned long pages = 0;
|
2016-12-13 03:41:47 +03:00
|
|
|
int target_node = NUMA_NO_NODE;
|
2020-04-07 06:05:45 +03:00
|
|
|
bool prot_numa = cp_flags & MM_CP_PROT_NUMA;
|
userfaultfd: wp: apply _PAGE_UFFD_WP bit
Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for
change_protection() when used with uffd-wp and make sure the two new flags
are exclusively used. Then,
- For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW
when a range of memory is write protected by uffd
- For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover
_PAGE_RW when write protection is resolved from userspace
And use this new interface in mwriteprotect_range() to replace the old
MM_CP_DIRTY_ACCT.
Do this change for both PTEs and huge PMDs. Then we can start to identify
which PTE/PMD is write protected by general (e.g., COW or soft dirty
tracking), and which is for userfaultfd-wp.
Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it
into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we
can be even more strict when detecting uffd-wp page faults in either
do_wp_page() or wp_huge_pmd().
After we're with _PAGE_UFFD_WP, a special case is when a page is both
protected by the general COW logic and also userfault-wp. Here the
userfault-wp will have higher priority and will be handled first. Only
after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle
the general COW. These are the steps on what will happen with such a
page:
1. CPU accesses write protected shared page (so both protected by
general COW and uffd-wp), blocked by uffd-wp first because in
do_wp_page we'll handle uffd-wp first, so it has higher priority
than general COW.
2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT
to remove the uffd-wp bit upon the PTE/PMD. However here we
still keep the write bit cleared. Notify the blocked CPU.
3. The blocked CPU resumes the page fault process with a fault
retry, during retry it'll notice it was not with the uffd-wp bit
this time but it is still write protected by general COW, then
it'll go though the COW path in the fault handler, copy the page,
apply write bit where necessary, and retry again.
4. The CPU will be able to access this page with write bit set.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:05:49 +03:00
|
|
|
bool uffd_wp = cp_flags & MM_CP_UFFD_WP;
|
|
|
|
|
bool uffd_wp_resolve = cp_flags & MM_CP_UFFD_WP_RESOLVE;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
tlb_change_page_size(tlb, PAGE_SIZE);
|
|
|
|
|
|
2017-02-23 02:44:12 +03:00
|
|
|
/*
|
2020-06-09 07:33:54 +03:00
|
|
|
* Can be called with only the mmap_lock for reading by
|
2017-02-23 02:44:12 +03:00
|
|
|
* prot_numa so we must check the pmd isn't constantly
|
|
|
|
|
* changing from under us from pmd_none to pmd_trans_huge
|
|
|
|
|
* and/or the other way around.
|
|
|
|
|
*/
|
|
|
|
|
if (pmd_trans_unstable(pmd))
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The pmd points to a regular pte so the pmd can't change
|
2020-06-09 07:33:54 +03:00
|
|
|
* from under us even if the mmap_lock is only hold for
|
2017-02-23 02:44:12 +03:00
|
|
|
* reading.
|
|
|
|
|
*/
|
|
|
|
|
pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
|
2014-04-08 02:36:56 +04:00
|
|
|
|
2016-12-13 03:41:47 +03:00
|
|
|
/* Get target node for single threaded private VMAs */
|
|
|
|
|
if (prot_numa && !(vma->vm_flags & VM_SHARED) &&
|
|
|
|
|
atomic_read(&vma->vm_mm->mm_users) == 1)
|
|
|
|
|
target_node = numa_node_id();
|
|
|
|
|
|
2017-08-02 23:31:52 +03:00
|
|
|
flush_tlb_batched_pending(vma->vm_mm);
|
2006-10-01 10:29:33 +04:00
|
|
|
arch_enter_lazy_mmu_mode();
|
2005-04-17 02:20:36 +04:00
|
|
|
do {
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:35 +04:00
|
|
|
oldpte = *pte;
|
|
|
|
|
if (pte_present(oldpte)) {
|
2005-04-17 02:20:36 +04:00
|
|
|
pte_t ptent;
|
|
|
|
|
|
2015-02-13 01:58:35 +03:00
|
|
|
/*
|
|
|
|
|
* Avoid trapping faults against the zero or KSM
|
|
|
|
|
* pages. See similar comment in change_huge_pmd.
|
|
|
|
|
*/
|
|
|
|
|
if (prot_numa) {
|
|
|
|
|
struct page *page;
|
2022-03-23 00:46:27 +03:00
|
|
|
int nid;
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 11:39:51 +03:00
|
|
|
bool toptier;
|
2015-02-13 01:58:35 +03:00
|
|
|
|
2019-12-01 04:57:32 +03:00
|
|
|
/* Avoid TLB flush if possible */
|
|
|
|
|
if (pte_protnone(oldpte))
|
|
|
|
|
continue;
|
|
|
|
|
|
2015-02-13 01:58:35 +03:00
|
|
|
page = vm_normal_page(vma, addr, oldpte);
|
2022-07-15 18:05:11 +03:00
|
|
|
if (!page || is_zone_device_page(page) || PageKsm(page))
|
2015-02-13 01:58:35 +03:00
|
|
|
continue;
|
2015-02-13 01:58:44 +03:00
|
|
|
|
mm: numa: do not trap faults on shared data section pages.
Workloads consisting of a large number of processes running the same
program with a very large shared data segment may experience performance
problems when numa balancing attempts to migrate the shared cow pages.
This manifests itself with many processes or tasks in
TASK_UNINTERRUPTIBLE state waiting for the shared pages to be migrated.
The program listed below simulates the conditions with these results
when run with 288 processes on a 144 core/8 socket machine.
Average throughput Average throughput Average throughput
with numa_balancing=0 with numa_balancing=1 with numa_balancing=1
without the patch with the patch
--------------------- --------------------- ---------------------
2118782 2021534 2107979
Complex production environments show less variability and fewer poorly
performing outliers accompanied with a smaller number of processes
waiting on NUMA page migration with this patch applied. In some cases,
%iowait drops from 16%-26% to 0.
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved.
*/
#include <sys/time.h>
#include <stdio.h>
#include <wait.h>
#include <sys/mman.h>
int a[1000000] = {13};
int main(int argc, const char **argv)
{
int n = 0;
int i;
pid_t pid;
int stat;
int *count_array;
int cpu_count = 288;
long total = 0;
struct timeval t1, t2 = {(argc > 1 ? atoi(argv[1]) : 10), 0};
if (argc > 2)
cpu_count = atoi(argv[2]);
count_array = mmap(NULL, cpu_count * sizeof(int),
(PROT_READ|PROT_WRITE),
(MAP_SHARED|MAP_ANONYMOUS), 0, 0);
if (count_array == MAP_FAILED) {
perror("mmap:");
return 0;
}
for (i = 0; i < cpu_count; ++i) {
pid = fork();
if (pid <= 0)
break;
if ((i & 0xf) == 0)
usleep(2);
}
if (pid != 0) {
if (i == 0) {
perror("fork:");
return 0;
}
for (;;) {
pid = wait(&stat);
if (pid < 0)
break;
}
for (i = 0; i < cpu_count; ++i)
total += count_array[i];
printf("Total %ld\n", total);
munmap(count_array, cpu_count * sizeof(int));
return 0;
}
gettimeofday(&t1, 0);
timeradd(&t1, &t2, &t1);
while (timercmp(&t2, &t1, <)) {
int b = 0;
int j;
for (j = 0; j < 1000000; j++)
b += a[j];
gettimeofday(&t2, 0);
n++;
}
count_array[i] = n;
return 0;
}
This patch changes change_pte_range() to skip shared copy-on-write pages
when called from change_prot_numa().
NOTE: change_prot_numa() is nominally called from task_numa_work() and
queue_pages_test_walk(). task_numa_work() is the auto NUMA balancing
path, and queue_pages_test_walk() is part of explicit NUMA policy
management. However, queue_pages_test_walk() only calls
change_prot_numa() when MPOL_MF_LAZY is specified and currently that is
not allowed, so change_prot_numa() is only called from auto NUMA
balancing.
In the case of explicit NUMA policy management, shared pages are not
migrated unless MPOL_MF_MOVE_ALL is specified, and MPOL_MF_MOVE_ALL
depends on CAP_SYS_NICE. Currently, there is no way to pass information
about MPOL_MF_MOVE_ALL to change_pte_range. This will have to be fixed
if MPOL_MF_LAZY is enabled and MPOL_MF_MOVE_ALL is to be honored in lazy
migration mode.
task_numa_work() skips the read-only VMAs of programs and shared
libraries.
Link: http://lkml.kernel.org/r/1516751617-7369-1-git-send-email-henry.willard@oracle.com
Signed-off-by: Henry Willard <henry.willard@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 03:21:07 +03:00
|
|
|
/* Also skip shared copy-on-write pages */
|
|
|
|
|
if (is_cow_mapping(vma->vm_flags) &&
|
mm: don't try to NUMA-migrate COW pages that have other uses
Oded Gabbay reports that enabling NUMA balancing causes corruption with
his Gaudi accelerator test load:
"All the details are in the bug, but the bottom line is that somehow,
this patch causes corruption when the numa balancing feature is
enabled AND we don't use process affinity AND we use GUP to pin pages
so our accelerator can DMA to/from system memory.
Either disabling numa balancing, using process affinity to bind to
specific numa-node or reverting this patch causes the bug to
disappear"
and Oded bisected the issue to commit 09854ba94c6a ("mm: do_wp_page()
simplification").
Now, the NUMA balancing shouldn't actually be changing the writability
of a page, and as such shouldn't matter for COW. But it appears it
does. Suspicious.
However, regardless of that, the condition for enabling NUMA faults in
change_pte_range() is nonsensical. It uses "page_mapcount(page)" to
decide if a COW page should be NUMA-protected or not, and that makes
absolutely no sense.
The number of mappings a page has is irrelevant: not only does GUP get a
reference to a page as in Oded's case, but the other mappings migth be
paged out and the only reference to them would be in the page count.
Since we should never try to NUMA-balance a page that we can't move
anyway due to other references, just fix the code to use 'page_count()'.
Oded confirms that that fixes his issue.
Now, this does imply that something in NUMA balancing ends up changing
page protections (other than the obvious one of making the page
inaccessible to get the NUMA faulting information). Otherwise the COW
simplification wouldn't matter - since doing the GUP on the page would
make sure it's writable.
The cause of that permission change would be good to figure out too,
since it clearly results in spurious COW events - but fixing the
nonsensical test that just happened to work before is obviously the
CorrectThing(tm) to do regardless.
Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215616
Link: https://lore.kernel.org/all/CAFCwf10eNmwq2wD71xjUhqkvv5+_pJMR1nPug2RqNDcFT4H86Q@mail.gmail.com/
Reported-and-tested-by: Oded Gabbay <oded.gabbay@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-02-17 19:57:47 +03:00
|
|
|
page_count(page) != 1)
|
mm: numa: do not trap faults on shared data section pages.
Workloads consisting of a large number of processes running the same
program with a very large shared data segment may experience performance
problems when numa balancing attempts to migrate the shared cow pages.
This manifests itself with many processes or tasks in
TASK_UNINTERRUPTIBLE state waiting for the shared pages to be migrated.
The program listed below simulates the conditions with these results
when run with 288 processes on a 144 core/8 socket machine.
Average throughput Average throughput Average throughput
with numa_balancing=0 with numa_balancing=1 with numa_balancing=1
without the patch with the patch
--------------------- --------------------- ---------------------
2118782 2021534 2107979
Complex production environments show less variability and fewer poorly
performing outliers accompanied with a smaller number of processes
waiting on NUMA page migration with this patch applied. In some cases,
%iowait drops from 16%-26% to 0.
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 Oracle and/or its affiliates. All rights reserved.
*/
#include <sys/time.h>
#include <stdio.h>
#include <wait.h>
#include <sys/mman.h>
int a[1000000] = {13};
int main(int argc, const char **argv)
{
int n = 0;
int i;
pid_t pid;
int stat;
int *count_array;
int cpu_count = 288;
long total = 0;
struct timeval t1, t2 = {(argc > 1 ? atoi(argv[1]) : 10), 0};
if (argc > 2)
cpu_count = atoi(argv[2]);
count_array = mmap(NULL, cpu_count * sizeof(int),
(PROT_READ|PROT_WRITE),
(MAP_SHARED|MAP_ANONYMOUS), 0, 0);
if (count_array == MAP_FAILED) {
perror("mmap:");
return 0;
}
for (i = 0; i < cpu_count; ++i) {
pid = fork();
if (pid <= 0)
break;
if ((i & 0xf) == 0)
usleep(2);
}
if (pid != 0) {
if (i == 0) {
perror("fork:");
return 0;
}
for (;;) {
pid = wait(&stat);
if (pid < 0)
break;
}
for (i = 0; i < cpu_count; ++i)
total += count_array[i];
printf("Total %ld\n", total);
munmap(count_array, cpu_count * sizeof(int));
return 0;
}
gettimeofday(&t1, 0);
timeradd(&t1, &t2, &t1);
while (timercmp(&t2, &t1, <)) {
int b = 0;
int j;
for (j = 0; j < 1000000; j++)
b += a[j];
gettimeofday(&t2, 0);
n++;
}
count_array[i] = n;
return 0;
}
This patch changes change_pte_range() to skip shared copy-on-write pages
when called from change_prot_numa().
NOTE: change_prot_numa() is nominally called from task_numa_work() and
queue_pages_test_walk(). task_numa_work() is the auto NUMA balancing
path, and queue_pages_test_walk() is part of explicit NUMA policy
management. However, queue_pages_test_walk() only calls
change_prot_numa() when MPOL_MF_LAZY is specified and currently that is
not allowed, so change_prot_numa() is only called from auto NUMA
balancing.
In the case of explicit NUMA policy management, shared pages are not
migrated unless MPOL_MF_MOVE_ALL is specified, and MPOL_MF_MOVE_ALL
depends on CAP_SYS_NICE. Currently, there is no way to pass information
about MPOL_MF_MOVE_ALL to change_pte_range. This will have to be fixed
if MPOL_MF_LAZY is enabled and MPOL_MF_MOVE_ALL is to be honored in lazy
migration mode.
task_numa_work() skips the read-only VMAs of programs and shared
libraries.
Link: http://lkml.kernel.org/r/1516751617-7369-1-git-send-email-henry.willard@oracle.com
Signed-off-by: Henry Willard <henry.willard@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Steve Sistare <steven.sistare@oracle.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 03:21:07 +03:00
|
|
|
continue;
|
|
|
|
|
|
2018-04-11 02:29:20 +03:00
|
|
|
/*
|
|
|
|
|
* While migration can move some dirty pages,
|
|
|
|
|
* it cannot move them all from MIGRATE_ASYNC
|
|
|
|
|
* context.
|
|
|
|
|
*/
|
2020-04-07 06:04:41 +03:00
|
|
|
if (page_is_file_lru(page) && PageDirty(page))
|
2018-04-11 02:29:20 +03:00
|
|
|
continue;
|
|
|
|
|
|
2016-12-13 03:41:47 +03:00
|
|
|
/*
|
|
|
|
|
* Don't mess with PTEs if page is already on the node
|
|
|
|
|
* a single-threaded process is running on.
|
|
|
|
|
*/
|
2022-03-23 00:46:27 +03:00
|
|
|
nid = page_to_nid(page);
|
|
|
|
|
if (target_node == nid)
|
|
|
|
|
continue;
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 11:39:51 +03:00
|
|
|
toptier = node_is_toptier(nid);
|
2022-03-23 00:46:27 +03:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Skip scanning top tier node if normal numa
|
|
|
|
|
* balancing is disabled
|
|
|
|
|
*/
|
|
|
|
|
if (!(sysctl_numa_balancing_mode & NUMA_BALANCING_NORMAL) &&
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 11:39:51 +03:00
|
|
|
toptier)
|
2016-12-13 03:41:47 +03:00
|
|
|
continue;
|
memory tiering: hot page selection with hint page fault latency
Patch series "memory tiering: hot page selection", v4.
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory nodes need to be identified.
Essentially, the original NUMA balancing implementation selects the mostly
recently accessed (MRU) pages to promote. But this isn't a perfect
algorithm to identify the hot pages. Because the pages with quite low
access frequency may be accessed eventually given the NUMA balancing page
table scanning period could be quite long (e.g. 60 seconds). So in this
patchset, we implement a new hot page identification algorithm based on
the latency between NUMA balancing page table scanning and hint page
fault. Which is a kind of mostly frequently accessed (MFU) algorithm.
In NUMA balancing memory tiering mode, if there are hot pages in slow
memory node and cold pages in fast memory node, we need to promote/demote
hot/cold pages between the fast and cold memory nodes.
A choice is to promote/demote as fast as possible. But the CPU cycles and
memory bandwidth consumed by the high promoting/demoting throughput will
hurt the latency of some workload because of accessing inflating and slow
memory bandwidth contention.
A way to resolve this issue is to restrict the max promoting/demoting
throughput. It will take longer to finish the promoting/demoting. But
the workload latency will be better. This is implemented in this patchset
as the page promotion rate limit mechanism.
The promotion hot threshold is workload and system configuration
dependent. So in this patchset, a method to adjust the hot threshold
automatically is implemented. The basic idea is to control the number of
the candidate promotion pages to match the promotion rate limit.
We used the pmbench memory accessing benchmark tested the patchset on a
2-socket server system with DRAM and PMEM installed. The test results are
as follows,
pmbench score promote rate
(accesses/s) MB/s
------------- ------------
base 146887704.1 725.6
hot selection 165695601.2 544.0
rate limit 162814569.8 165.2
auto adjustment 170495294.0 136.9
From the results above,
With hot page selection patch [1/3], the pmbench score increases about
12.8%, and promote rate (overhead) decreases about 25.0%, compared with
base kernel.
With rate limit patch [2/3], pmbench score decreases about 1.7%, and
promote rate decreases about 69.6%, compared with hot page selection
patch.
With threshold auto adjustment patch [3/3], pmbench score increases about
4.7%, and promote rate decrease about 17.1%, compared with rate limit
patch.
Baolin helped to test the patchset with MySQL on a machine which contains
1 DRAM node (30G) and 1 PMEM node (126G).
sysbench /usr/share/sysbench/oltp_read_write.lua \
......
--tables=200 \
--table-size=1000000 \
--report-interval=10 \
--threads=16 \
--time=120
The tps can be improved about 5%.
This patch (of 3):
To optimize page placement in a memory tiering system with NUMA balancing,
the hot pages in the slow memory node need to be identified. Essentially,
the original NUMA balancing implementation selects the mostly recently
accessed (MRU) pages to promote. But this isn't a perfect algorithm to
identify the hot pages. Because the pages with quite low access frequency
may be accessed eventually given the NUMA balancing page table scanning
period could be quite long (e.g. 60 seconds). The most frequently
accessed (MFU) algorithm is better.
So, in this patch we implemented a better hot page selection algorithm.
Which is based on NUMA balancing page table scanning and hint page fault
as follows,
- When the page tables of the processes are scanned to change PTE/PMD
to be PROT_NONE, the current time is recorded in struct page as scan
time.
- When the page is accessed, hint page fault will occur. The scan
time is gotten from the struct page. And The hint page fault
latency is defined as
hint page fault time - scan time
The shorter the hint page fault latency of a page is, the higher the
probability of their access frequency to be higher. So the hint page
fault latency is a better estimation of the page hot/cold.
It's hard to find some extra space in struct page to hold the scan time.
Fortunately, we can reuse some bits used by the original NUMA balancing.
NUMA balancing uses some bits in struct page to store the page accessing
CPU and PID (referring to page_cpupid_xchg_last()). Which is used by the
multi-stage node selection algorithm to avoid to migrate pages shared
accessed by the NUMA nodes back and forth. But for pages in the slow
memory node, even if they are shared accessed by multiple NUMA nodes, as
long as the pages are hot, they need to be promoted to the fast memory
node. So the accessing CPU and PID information are unnecessary for the
slow memory pages. We can reuse these bits in struct page to record the
scan time. For the fast memory pages, these bits are used as before.
For the hot threshold, the default value is 1 second, which works well in
our performance test. All pages with hint page fault latency < hot
threshold will be considered hot.
It's hard for users to determine the hot threshold. So we don't provide a
kernel ABI to set it, just provide a debugfs interface for advanced users
to experiment. We will continue to work on a hot threshold automatic
adjustment mechanism.
The downside of the above method is that the response time to the workload
hot spot changing may be much longer. For example,
- A previous cold memory area becomes hot
- The hint page fault will be triggered. But the hint page fault
latency isn't shorter than the hot threshold. So the pages will
not be promoted.
- When the memory area is scanned again, maybe after a scan period,
the hint page fault latency measured will be shorter than the hot
threshold and the pages will be promoted.
To mitigate this, if there are enough free space in the fast memory node,
the hot threshold will not be used, all pages will be promoted upon the
hint page fault for fast response.
Thanks Zhong Jiang reported and tested the fix for a bug when disabling
memory tiering mode dynamically.
Link: https://lkml.kernel.org/r/20220713083954.34196-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20220713083954.34196-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Wei Xu <weixugc@google.com>
Cc: osalvador <osalvador@suse.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zhong Jiang <zhongjiang-ali@linux.alibaba.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-13 11:39:51 +03:00
|
|
|
if (sysctl_numa_balancing_mode & NUMA_BALANCING_MEMORY_TIERING &&
|
|
|
|
|
!toptier)
|
|
|
|
|
xchg_page_access_time(page,
|
|
|
|
|
jiffies_to_msecs(jiffies));
|
2015-02-13 01:58:35 +03:00
|
|
|
}
|
|
|
|
|
|
2019-03-06 02:46:29 +03:00
|
|
|
oldpte = ptep_modify_prot_start(vma, addr, pte);
|
|
|
|
|
ptent = pte_modify(oldpte, newprot);
|
2012-10-25 16:16:32 +04:00
|
|
|
|
2022-12-14 23:15:33 +03:00
|
|
|
if (uffd_wp)
|
userfaultfd: wp: apply _PAGE_UFFD_WP bit
Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for
change_protection() when used with uffd-wp and make sure the two new flags
are exclusively used. Then,
- For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW
when a range of memory is write protected by uffd
- For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover
_PAGE_RW when write protection is resolved from userspace
And use this new interface in mwriteprotect_range() to replace the old
MM_CP_DIRTY_ACCT.
Do this change for both PTEs and huge PMDs. Then we can start to identify
which PTE/PMD is write protected by general (e.g., COW or soft dirty
tracking), and which is for userfaultfd-wp.
Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it
into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we
can be even more strict when detecting uffd-wp page faults in either
do_wp_page() or wp_huge_pmd().
After we're with _PAGE_UFFD_WP, a special case is when a page is both
protected by the general COW logic and also userfault-wp. Here the
userfault-wp will have higher priority and will be handled first. Only
after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle
the general COW. These are the steps on what will happen with such a
page:
1. CPU accesses write protected shared page (so both protected by
general COW and uffd-wp), blocked by uffd-wp first because in
do_wp_page we'll handle uffd-wp first, so it has higher priority
than general COW.
2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT
to remove the uffd-wp bit upon the PTE/PMD. However here we
still keep the write bit cleared. Notify the blocked CPU.
3. The blocked CPU resumes the page fault process with a fault
retry, during retry it'll notice it was not with the uffd-wp bit
this time but it is still write protected by general COW, then
it'll go though the COW path in the fault handler, copy the page,
apply write bit where necessary, and retry again.
4. The CPU will be able to access this page with write bit set.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:05:49 +03:00
|
|
|
ptent = pte_mkuffd_wp(ptent);
|
2022-12-14 23:15:33 +03:00
|
|
|
else if (uffd_wp_resolve)
|
userfaultfd: wp: apply _PAGE_UFFD_WP bit
Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for
change_protection() when used with uffd-wp and make sure the two new flags
are exclusively used. Then,
- For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW
when a range of memory is write protected by uffd
- For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover
_PAGE_RW when write protection is resolved from userspace
And use this new interface in mwriteprotect_range() to replace the old
MM_CP_DIRTY_ACCT.
Do this change for both PTEs and huge PMDs. Then we can start to identify
which PTE/PMD is write protected by general (e.g., COW or soft dirty
tracking), and which is for userfaultfd-wp.
Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it
into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we
can be even more strict when detecting uffd-wp page faults in either
do_wp_page() or wp_huge_pmd().
After we're with _PAGE_UFFD_WP, a special case is when a page is both
protected by the general COW logic and also userfault-wp. Here the
userfault-wp will have higher priority and will be handled first. Only
after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle
the general COW. These are the steps on what will happen with such a
page:
1. CPU accesses write protected shared page (so both protected by
general COW and uffd-wp), blocked by uffd-wp first because in
do_wp_page we'll handle uffd-wp first, so it has higher priority
than general COW.
2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT
to remove the uffd-wp bit upon the PTE/PMD. However here we
still keep the write bit cleared. Notify the blocked CPU.
3. The blocked CPU resumes the page fault process with a fault
retry, during retry it'll notice it was not with the uffd-wp bit
this time but it is still write protected by general COW, then
it'll go though the COW path in the fault handler, copy the page,
apply write bit where necessary, and retry again.
4. The CPU will be able to access this page with write bit set.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:05:49 +03:00
|
|
|
ptent = pte_clear_uffd_wp(ptent);
|
|
|
|
|
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
/*
|
|
|
|
|
* In some writable, shared mappings, we might want
|
|
|
|
|
* to catch actual write access -- see
|
|
|
|
|
* vma_wants_writenotify().
|
|
|
|
|
*
|
|
|
|
|
* In all writable, private mappings, we have to
|
|
|
|
|
* properly handle COW.
|
|
|
|
|
*
|
|
|
|
|
* In both cases, we can sometimes still change PTEs
|
|
|
|
|
* writable and avoid the write-fault handler, for
|
|
|
|
|
* example, if a PTE is already dirty and no other
|
|
|
|
|
* COW or special handling is required.
|
|
|
|
|
*/
|
|
|
|
|
if ((cp_flags & MM_CP_TRY_CHANGE_WRITABLE) &&
|
|
|
|
|
!pte_write(ptent) &&
|
|
|
|
|
can_change_pte_writable(vma, addr, ptent))
|
2015-02-13 01:58:22 +03:00
|
|
|
ptent = pte_mkwrite(ptent);
|
mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection
Similar to our MM_CP_DIRTY_ACCT handling for shared, writable mappings, we
can try mapping anonymous pages in a private writable mapping writable if
they are exclusive, the PTE is already dirty, and no special handling
applies. Mapping the anonymous page writable is essentially the same
thing the write fault handler would do in this case.
Special handling is required for uffd-wp and softdirty tracking, so take
care of that properly. Also, leave PROT_NONE handling alone for now; in
the future, we could similarly extend the logic in do_numa_page() or use
pte_mk_savedwrite() here.
While this improves mprotect(PROT_READ)+mprotect(PROT_READ|PROT_WRITE)
performance, it should also be a valuable optimization for uffd-wp, when
un-protecting.
This has been previously suggested by Peter Collingbourne in [1], relevant
in the context of the Scudo memory allocator, before we had
PageAnonExclusive.
This commit doesn't add the same handling for PMDs (i.e., anonymous THP,
anonymous hugetlb); benchmark results from Andrea indicate that there are
minor performance gains, so it's might still be valuable to streamline
that logic for all anonymous pages in the future.
As we now also set MM_CP_DIRTY_ACCT for private mappings, let's rename it
to MM_CP_TRY_CHANGE_WRITABLE, to make it clearer what's actually
happening.
Micro-benchmark courtesy of Andrea:
===
#define _GNU_SOURCE
#include <sys/mman.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include <unistd.h>
#define SIZE (1024*1024*1024)
int main(int argc, char *argv[])
{
char *p;
if (posix_memalign((void **)&p, sysconf(_SC_PAGESIZE)*512, SIZE))
perror("posix_memalign"), exit(1);
if (madvise(p, SIZE, argc > 1 ? MADV_HUGEPAGE : MADV_NOHUGEPAGE))
perror("madvise");
explicit_bzero(p, SIZE);
for (int loops = 0; loops < 40; loops++) {
if (mprotect(p, SIZE, PROT_READ))
perror("mprotect"), exit(1);
if (mprotect(p, SIZE, PROT_READ|PROT_WRITE))
perror("mprotect"), exit(1);
explicit_bzero(p, SIZE);
}
}
===
Results on my Ryzen 9 3900X:
Stock 10 runs (lower is better): AVG 6.398s, STDEV 0.043
Patched 10 runs (lower is better): AVG 3.780s, STDEV 0.026
===
[1] https://lkml.kernel.org/r/20210429214801.2583336-1-pcc@google.com
Link: https://lkml.kernel.org/r/20220614093629.76309-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Peter Collingbourne <pcc@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-14 12:36:29 +03:00
|
|
|
|
2019-03-06 02:46:29 +03:00
|
|
|
ptep_modify_prot_commit(vma, addr, pte, oldpte, ptent);
|
2022-05-10 04:20:50 +03:00
|
|
|
if (pte_needs_flush(oldpte, ptent))
|
|
|
|
|
tlb_flush_pte_range(tlb, addr, PAGE_SIZE);
|
2015-02-13 01:58:22 +03:00
|
|
|
pages++;
|
2020-04-07 06:06:01 +03:00
|
|
|
} else if (is_swap_pte(oldpte)) {
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:35 +04:00
|
|
|
swp_entry_t entry = pte_to_swp_entry(oldpte);
|
2020-04-07 06:06:01 +03:00
|
|
|
pte_t newpte;
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:35 +04:00
|
|
|
|
2021-07-01 04:54:09 +03:00
|
|
|
if (is_writable_migration_entry(entry)) {
|
2022-08-24 01:11:38 +03:00
|
|
|
struct page *page = pfn_swap_entry_to_page(entry);
|
|
|
|
|
|
[PATCH] Swapless page migration: add R/W migration entries
Implement read/write migration ptes
We take the upper two swapfiles for the two types of migration ptes and define
a series of macros in swapops.h.
The VM is modified to handle the migration entries. migration entries can
only be encountered when the page they are pointing to is locked. This limits
the number of places one has to fix. We also check in copy_pte_range and in
mprotect_pte_range() for migration ptes.
We check for migration ptes in do_swap_cache and call a function that will
then wait on the page lock. This allows us to effectively stop all accesses
to apge.
Migration entries are created by try_to_unmap if called for migration and
removed by local functions in migrate.c
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration (I've no NUMA, just
hacking it up to migrate recklessly while running load), I've hit the
BUG_ON(!PageLocked(p)) in migration_entry_to_page.
This comes from an orphaned migration entry, unrelated to the current
correctly locked migration, but hit by remove_anon_migration_ptes as it
checks an address in each vma of the anon_vma list.
Such an orphan may be left behind if an earlier migration raced with fork:
copy_one_pte can duplicate a migration entry from parent to child, after
remove_anon_migration_ptes has checked the child vma, but before it has
removed it from the parent vma. (If the process were later to fault on this
orphaned entry, it would hit the same BUG from migration_entry_wait.)
This could be fixed by locking anon_vma in copy_one_pte, but we'd rather
not. There's no such problem with file pages, because vma_prio_tree_add
adds child vma after parent vma, and the page table locking at each end is
enough to serialize. Follow that example with anon_vma: add new vmas to the
tail instead of the head.
(There's no corresponding problem when inserting migration entries,
because a missed pte will leave the page count and mapcount high, which is
allowed for. And there's no corresponding problem when migrating via swap,
because a leftover swap entry will be correctly faulted. But the swapless
method has no refcounting of its entries.)
From: Ingo Molnar <mingo@elte.hu>
pte_unmap_unlock() takes the pte pointer as an argument.
From: Hugh Dickins <hugh@veritas.com>
Several times while testing swapless page migration, gcc has tried to exec
a pointer instead of a string: smells like COW mappings are not being
properly write-protected on fork.
The protection in copy_one_pte looks very convincing, until at last you
realize that the second arg to make_migration_entry is a boolean "write",
and SWP_MIGRATION_READ is 30.
Anyway, it's better done like in change_pte_range, using
is_write_migration_entry and make_migration_entry_read.
From: Hugh Dickins <hugh@veritas.com>
Remove unnecessary obfuscation from sys_swapon's range check on swap type,
which blew up causing memory corruption once swapless migration made
MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 13:03:35 +04:00
|
|
|
/*
|
|
|
|
|
* A protection check is difficult so
|
|
|
|
|
* just be safe and disable write
|
|
|
|
|
*/
|
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive
Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as
exclusive, and use that information to make GUP pins reliable and stay
consistent with the page mapped into the page table even if the page table
entry gets write-protected.
With that information at hand, we can extend our COW logic to always reuse
anonymous pages that are exclusive. For anonymous pages that might be
shared, the existing logic applies.
As already documented, PG_anon_exclusive is usually only expressive in
combination with a page table entry. Especially PTE vs. PMD-mapped
anonymous pages require more thought, some examples: due to mremap() we
can easily have a single compound page PTE-mapped into multiple page
tables exclusively in a single process -- multiple page table locks apply.
Further, due to MADV_WIPEONFORK we might not necessarily write-protect
all PTEs, and only some subpages might be pinned. Long story short: once
PTE-mapped, we have to track information about exclusivity per sub-page,
but until then, we can just track it for the compound page in the head
page and not having to update a whole bunch of subpages all of the time
for a simple PMD mapping of a THP.
For simplicity, this commit mostly talks about "anonymous pages", while
it's for THP actually "the part of an anonymous folio referenced via a
page table entry".
To not spill PG_anon_exclusive code all over the mm code-base, we let the
anon rmap code to handle all PG_anon_exclusive logic it can easily handle.
If a writable, present page table entry points at an anonymous (sub)page,
that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably
pin (FOLL_PIN) on an anonymous page references via a present page table
entry, it must only pin if PG_anon_exclusive is set for the mapped
(sub)page.
This commit doesn't adjust GUP, so this is only implicitly handled for
FOLL_WRITE, follow-up commits will teach GUP to also respect it for
FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully
reliable.
Whenever an anonymous page is to be shared (fork(), KSM), or when
temporarily unmapping an anonymous page (swap, migration), the relevant
PG_anon_exclusive bit has to be cleared to mark the anonymous page
possibly shared. Clearing will fail if there are GUP pins on the page:
* For fork(), this means having to copy the page and not being able to
share it. fork() protects against concurrent GUP using the PT lock and
the src_mm->write_protect_seq.
* For KSM, this means sharing will fail. For swap this means, unmapping
will fail, For migration this means, migration will fail early. All
three cases protect against concurrent GUP using the PT lock and a
proper clear/invalidate+flush of the relevant page table entry.
This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a
pinned page gets mapped R/O and the successive write fault ends up
replacing the page instead of reusing it. It improves the situation for
O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if
fork() is *not* involved, however swapout and fork() are still
problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP
users will fix the issue for them.
I. Details about basic handling
I.1. Fresh anonymous pages
page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the
given page exclusive via __page_set_anon_rmap(exclusive=1). As that is
the mechanism fresh anonymous pages come into life (besides migration code
where we copy the page->mapping), all fresh anonymous pages will start out
as exclusive.
I.2. COW reuse handling of anonymous pages
When a COW handler stumbles over a (sub)page that's marked exclusive, it
simply reuses it. Otherwise, the handler tries harder under page lock to
detect if the (sub)page is exclusive and can be reused. If exclusive,
page_move_anon_rmap() will mark the given (sub)page exclusive.
Note that hugetlb code does not yet check for PageAnonExclusive(), as it
still uses the old COW logic that is prone to the COW security issue
because hugetlb code cannot really tolerate unnecessary/wrong COW as huge
pages are a scarce resource.
I.3. Migration handling
try_to_migrate() has to try marking an exclusive anonymous page shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. migrate_vma_collect_pmd() and
__split_huge_pmd_locked() are handled similarly.
Writable migration entries implicitly point at shared anonymous pages.
For readable migration entries that information is stored via a new
"readable-exclusive" migration entry, specific to anonymous pages.
When restoring a migration entry in remove_migration_pte(), information
about exlusivity is detected via the migration entry type, and
RMAP_EXCLUSIVE is set accordingly for
page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information.
I.4. Swapout handling
try_to_unmap() has to try marking the mapped page possibly shared via
page_try_share_anon_rmap(). If it fails because there are GUP pins on the
page, unmap fails. For now, information about exclusivity is lost. In
the future, we might want to remember that information in the swap entry
in some cases, however, it requires more thought, care, and a way to store
that information in swap entries.
I.5. Swapin handling
do_swap_page() will never stumble over exclusive anonymous pages in the
swap cache, as try_to_migrate() prohibits that. do_swap_page() always has
to detect manually if an anonymous page is exclusive and has to set
RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly.
I.6. THP handling
__split_huge_pmd_locked() has to move the information about exclusivity
from the PMD to the PTEs.
a) In case we have a readable-exclusive PMD migration entry, simply
insert readable-exclusive PTE migration entries.
b) In case we have a present PMD entry and we don't want to freeze
("convert to migration entries"), simply forward PG_anon_exclusive to
all sub-pages, no need to temporarily clear the bit.
c) In case we have a present PMD entry and want to freeze, handle it
similar to try_to_migrate(): try marking the page shared first. In
case we fail, we ignore the "freeze" instruction and simply split
ordinarily. try_to_migrate() will properly fail because the THP is
still mapped via PTEs.
When splitting a compound anonymous folio (THP), the information about
exclusivity is implicitly handled via the migration entries: no need to
replicate PG_anon_exclusive manually.
I.7. fork() handling fork() handling is relatively easy, because
PG_anon_exclusive is only expressive for some page table entry types.
a) Present anonymous pages
page_try_dup_anon_rmap() will mark the given subpage shared -- which will
fail if the page is pinned. If it failed, we have to copy (or PTE-map a
PMD to handle it on the PTE level).
Note that device exclusive entries are just a pointer at a PageAnon()
page. fork() will first convert a device exclusive entry to a present
page table and handle it just like present anonymous pages.
b) Device private entry
Device private entries point at PageAnon() pages that cannot be mapped
directly and, therefore, cannot get pinned.
page_try_dup_anon_rmap() will mark the given subpage shared, which cannot
fail because they cannot get pinned.
c) HW poison entries
PG_anon_exclusive will remain untouched and is stale -- the page table
entry is just a placeholder after all.
d) Migration entries
Writable and readable-exclusive entries are converted to readable entries:
possibly shared.
I.8. mprotect() handling
mprotect() only has to properly handle the new readable-exclusive
migration entry:
When write-protecting a migration entry that points at an anonymous page,
remember the information about exclusivity via the "readable-exclusive"
migration entry type.
II. Migration and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a migration entry, we have to mark the page possibly
shared and synchronize against GUP-fast by a proper clear/invalidate+flush
to make the following scenario impossible:
1. try_to_migrate() places a migration entry after checking for GUP pins
and marks the page possibly shared.
2. GUP-fast pins the page due to lack of synchronization
3. fork() converts the "writable/readable-exclusive" migration entry into a
readable migration entry
4. Migration fails due to the GUP pin (failing to freeze the refcount)
5. Migration entries are restored. PG_anon_exclusive is lost
-> We have a pinned page that is not marked exclusive anymore.
Note that we move information about exclusivity from the page to the
migration entry as it otherwise highly overcomplicates fork() and
PTE-mapping a THP.
III. Swapout and GUP-fast
Whenever replacing a present page table entry that maps an exclusive
anonymous page by a swap entry, we have to mark the page possibly shared
and synchronize against GUP-fast by a proper clear/invalidate+flush to
make the following scenario impossible:
1. try_to_unmap() places a swap entry after checking for GUP pins and
clears exclusivity information on the page.
2. GUP-fast pins the page due to lack of synchronization.
-> We have a pinned page that is not marked exclusive anymore.
If we'd ever store information about exclusivity in the swap entry,
similar to migration handling, the same considerations as in II would
apply. This is future work.
Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:44 +03:00
|
|
|
if (PageAnon(page))
|
|
|
|
|
entry = make_readable_exclusive_migration_entry(
|
|
|
|
|
swp_offset(entry));
|
|
|
|
|
else
|
|
|
|
|
entry = make_readable_migration_entry(swp_offset(entry));
|
2013-10-17 00:46:51 +04:00
|
|
|
newpte = swp_entry_to_pte(entry);
|
|
|
|
|
if (pte_swp_soft_dirty(oldpte))
|
|
|
|
|
newpte = pte_swp_mksoft_dirty(newpte);
|
2020-04-07 06:06:01 +03:00
|
|
|
if (pte_swp_uffd_wp(oldpte))
|
|
|
|
|
newpte = pte_swp_mkuffd_wp(newpte);
|
2021-07-01 04:54:09 +03:00
|
|
|
} else if (is_writable_device_private_entry(entry)) {
|
2017-09-09 02:11:43 +03:00
|
|
|
/*
|
|
|
|
|
* We do not preserve soft-dirtiness. See
|
|
|
|
|
* copy_one_pte() for explanation.
|
|
|
|
|
*/
|
2021-07-01 04:54:09 +03:00
|
|
|
entry = make_readable_device_private_entry(
|
|
|
|
|
swp_offset(entry));
|
2017-09-09 02:11:43 +03:00
|
|
|
newpte = swp_entry_to_pte(entry);
|
2020-04-07 06:06:01 +03:00
|
|
|
if (pte_swp_uffd_wp(oldpte))
|
|
|
|
|
newpte = pte_swp_mkuffd_wp(newpte);
|
2021-07-01 04:54:25 +03:00
|
|
|
} else if (is_writable_device_exclusive_entry(entry)) {
|
|
|
|
|
entry = make_readable_device_exclusive_entry(
|
|
|
|
|
swp_offset(entry));
|
|
|
|
|
newpte = swp_entry_to_pte(entry);
|
|
|
|
|
if (pte_swp_soft_dirty(oldpte))
|
|
|
|
|
newpte = pte_swp_mksoft_dirty(newpte);
|
|
|
|
|
if (pte_swp_uffd_wp(oldpte))
|
|
|
|
|
newpte = pte_swp_mkuffd_wp(newpte);
|
2022-12-14 23:04:53 +03:00
|
|
|
} else if (is_pte_marker_entry(entry)) {
|
|
|
|
|
/*
|
|
|
|
|
* Ignore swapin errors unconditionally,
|
|
|
|
|
* because any access should sigbus anyway.
|
|
|
|
|
*/
|
|
|
|
|
if (is_swapin_error_entry(entry))
|
|
|
|
|
continue;
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
/*
|
|
|
|
|
* If this is uffd-wp pte marker and we'd like
|
|
|
|
|
* to unprotect it, drop it; the next page
|
|
|
|
|
* fault will trigger without uffd trapping.
|
|
|
|
|
*/
|
|
|
|
|
if (uffd_wp_resolve) {
|
|
|
|
|
pte_clear(vma->vm_mm, addr, pte);
|
|
|
|
|
pages++;
|
|
|
|
|
}
|
2022-05-13 06:22:52 +03:00
|
|
|
continue;
|
2020-04-07 06:06:01 +03:00
|
|
|
} else {
|
|
|
|
|
newpte = oldpte;
|
|
|
|
|
}
|
2017-09-09 02:11:43 +03:00
|
|
|
|
2020-04-07 06:06:01 +03:00
|
|
|
if (uffd_wp)
|
|
|
|
|
newpte = pte_swp_mkuffd_wp(newpte);
|
|
|
|
|
else if (uffd_wp_resolve)
|
|
|
|
|
newpte = pte_swp_clear_uffd_wp(newpte);
|
|
|
|
|
|
|
|
|
|
if (!pte_same(oldpte, newpte)) {
|
|
|
|
|
set_pte_at(vma->vm_mm, addr, pte, newpte);
|
2017-09-09 02:11:43 +03:00
|
|
|
pages++;
|
|
|
|
|
}
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
} else {
|
|
|
|
|
/* It must be an none page, or what else?.. */
|
|
|
|
|
WARN_ON_ONCE(!pte_none(oldpte));
|
|
|
|
|
if (unlikely(uffd_wp && !vma_is_anonymous(vma))) {
|
|
|
|
|
/*
|
|
|
|
|
* For file-backed mem, we need to be able to
|
|
|
|
|
* wr-protect a none pte, because even if the
|
|
|
|
|
* pte is none, the page/swap cache could
|
|
|
|
|
* exist. Doing that by install a marker.
|
|
|
|
|
*/
|
|
|
|
|
set_pte_at(vma->vm_mm, addr, pte,
|
|
|
|
|
make_pte_marker(PTE_MARKER_UFFD_WP));
|
|
|
|
|
pages++;
|
|
|
|
|
}
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
} while (pte++, addr += PAGE_SIZE, addr != end);
|
2006-10-01 10:29:33 +04:00
|
|
|
arch_leave_lazy_mmu_mode();
|
2005-10-30 04:16:27 +03:00
|
|
|
pte_unmap_unlock(pte - 1, ptl);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
|
|
|
|
return pages;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
2020-03-06 09:28:26 +03:00
|
|
|
/*
|
|
|
|
|
* Used when setting automatic NUMA hinting protection where it is
|
|
|
|
|
* critical that a numa hinting PMD is not confused with a bad PMD.
|
|
|
|
|
*/
|
|
|
|
|
static inline int pmd_none_or_clear_bad_unless_trans_huge(pmd_t *pmd)
|
|
|
|
|
{
|
2020-11-26 19:20:28 +03:00
|
|
|
pmd_t pmdval = pmdp_get_lockless(pmd);
|
2020-03-06 09:28:26 +03:00
|
|
|
|
|
|
|
|
/* See pmd_none_or_trans_huge_or_clear_bad for info on barrier */
|
|
|
|
|
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
|
|
|
|
|
barrier();
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (pmd_none(pmdval))
|
|
|
|
|
return 1;
|
|
|
|
|
if (pmd_trans_huge(pmdval))
|
|
|
|
|
return 0;
|
|
|
|
|
if (unlikely(pmd_bad(pmdval))) {
|
|
|
|
|
pmd_clear_bad(pmd);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
/* Return true if we're uffd wr-protecting file-backed memory, or false */
|
|
|
|
|
static inline bool
|
|
|
|
|
uffd_wp_protect_file(struct vm_area_struct *vma, unsigned long cp_flags)
|
|
|
|
|
{
|
|
|
|
|
return (cp_flags & MM_CP_UFFD_WP) && !vma_is_anonymous(vma);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If wr-protecting the range for file-backed, populate pgtable for the case
|
|
|
|
|
* when pgtable is empty but page cache exists. When {pte|pmd|...}_alloc()
|
|
|
|
|
* failed it means no memory, we don't have a better option but stop.
|
|
|
|
|
*/
|
|
|
|
|
#define change_pmd_prepare(vma, pmd, cp_flags) \
|
|
|
|
|
do { \
|
|
|
|
|
if (unlikely(uffd_wp_protect_file(vma, cp_flags))) { \
|
|
|
|
|
if (WARN_ON_ONCE(pte_alloc(vma->vm_mm, pmd))) \
|
|
|
|
|
break; \
|
|
|
|
|
} \
|
|
|
|
|
} while (0)
|
|
|
|
|
/*
|
|
|
|
|
* This is the general pud/p4d/pgd version of change_pmd_prepare(). We need to
|
|
|
|
|
* have separate change_pmd_prepare() because pte_alloc() returns 0 on success,
|
|
|
|
|
* while {pmd|pud|p4d}_alloc() returns the valid pointer on success.
|
|
|
|
|
*/
|
|
|
|
|
#define change_prepare(vma, high, low, addr, cp_flags) \
|
|
|
|
|
do { \
|
|
|
|
|
if (unlikely(uffd_wp_protect_file(vma, cp_flags))) { \
|
|
|
|
|
low##_t *p = low##_alloc(vma->vm_mm, high, addr); \
|
|
|
|
|
if (WARN_ON_ONCE(p == NULL)) \
|
|
|
|
|
break; \
|
|
|
|
|
} \
|
|
|
|
|
} while (0)
|
|
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
static inline unsigned long change_pmd_range(struct mmu_gather *tlb,
|
|
|
|
|
struct vm_area_struct *vma, pud_t *pud, unsigned long addr,
|
|
|
|
|
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
|
|
|
|
pmd_t *pmd;
|
|
|
|
|
unsigned long next;
|
2012-11-19 06:14:23 +04:00
|
|
|
unsigned long pages = 0;
|
2013-11-13 03:08:32 +04:00
|
|
|
unsigned long nr_huge_updates = 0;
|
2018-12-28 11:38:09 +03:00
|
|
|
struct mmu_notifier_range range;
|
|
|
|
|
|
|
|
|
|
range.start = 0;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
|
pmd = pmd_offset(pud, addr);
|
|
|
|
|
do {
|
2013-10-07 14:29:14 +04:00
|
|
|
unsigned long this_pages;
|
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
next = pmd_addr_end(addr, end);
|
2020-03-06 09:28:26 +03:00
|
|
|
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
change_pmd_prepare(vma, pmd, cp_flags);
|
2020-03-06 09:28:26 +03:00
|
|
|
/*
|
2020-06-09 07:33:54 +03:00
|
|
|
* Automatic NUMA balancing walks the tables with mmap_lock
|
2020-03-06 09:28:26 +03:00
|
|
|
* held for read. It's possible a parallel update to occur
|
|
|
|
|
* between pmd_trans_huge() and a pmd_none_or_clear_bad()
|
|
|
|
|
* check leading to a false positive and clearing.
|
|
|
|
|
* Hence, it's necessary to atomically read the PMD value
|
|
|
|
|
* for all the checks.
|
|
|
|
|
*/
|
|
|
|
|
if (!is_swap_pmd(*pmd) && !pmd_devmap(*pmd) &&
|
|
|
|
|
pmd_none_or_clear_bad_unless_trans_huge(pmd))
|
mm/mprotect: add a cond_resched() inside change_pmd_range()
While testing on a large CPU system, detected the following RCU stall
many times over the span of the workload. This problem is solved by
adding a cond_resched() in the change_pmd_range() function.
INFO: rcu_sched detected stalls on CPUs/tasks:
154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612
(detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864)
Sending NMI from CPU 955 to CPUs 154:
NMI backtrace for cpu 154
CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3
NIP: c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18
REGS: 00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22422082 XER: 00000000
CFAR: 00000000006cf8f0 SOFTE: 1
GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000
GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00
GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00
GPR12: ffffffffffffffff c00000000fb25100
NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c
LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420
Call Trace:
flush_hash_range+0x48/0x100
__flush_tlb_pending+0x44/0xd0
hpte_need_flush+0x408/0x470
change_protection_range+0xaac/0xf10
change_prot_numa+0x30/0xb0
task_numa_work+0x2d0/0x3e0
task_work_run+0x130/0x190
do_notify_resume+0x118/0x120
ret_from_except_lite+0x70/0x74
Instruction dump:
60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378
e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008
Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-05 03:17:52 +03:00
|
|
|
goto next;
|
2014-04-08 02:36:57 +04:00
|
|
|
|
|
|
|
|
/* invoke the mmu notifier if the pmd is populated */
|
2018-12-28 11:38:09 +03:00
|
|
|
if (!range.start) {
|
2019-05-14 03:20:53 +03:00
|
|
|
mmu_notifier_range_init(&range,
|
|
|
|
|
MMU_NOTIFY_PROTECTION_VMA, 0,
|
|
|
|
|
vma, vma->vm_mm, addr, end);
|
2018-12-28 11:38:09 +03:00
|
|
|
mmu_notifier_invalidate_range_start(&range);
|
2014-04-08 02:36:57 +04:00
|
|
|
}
|
|
|
|
|
|
mm: thp: check pmd migration entry in common path
When THP migration is being used, memory management code needs to handle
pmd migration entries properly. This patch uses !pmd_present() or
is_swap_pmd() (depending on whether pmd_none() needs separate code or
not) to check pmd migration entries at the places where a pmd entry is
present.
Since pmd-related code uses split_huge_page(), split_huge_pmd(),
pmd_trans_huge(), pmd_trans_unstable(), or
pmd_none_or_trans_huge_or_clear_bad(), this patch:
1. adds pmd migration entry split code in split_huge_pmd(),
2. takes care of pmd migration entries whenever pmd_trans_huge() is present,
3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware.
Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable()
is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change
them.
Until this commit, a pmd entry should be:
1. pointing to a pte page,
2. is_swap_pmd(),
3. pmd_trans_huge(),
4. pmd_devmap(), or
5. pmd_none().
Signed-off-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-09 02:11:01 +03:00
|
|
|
if (is_swap_pmd(*pmd) || pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) {
|
2022-05-13 06:22:53 +03:00
|
|
|
if ((next - addr != HPAGE_PMD_SIZE) ||
|
|
|
|
|
uffd_wp_protect_file(vma, cp_flags)) {
|
2016-12-13 03:42:20 +03:00
|
|
|
__split_huge_pmd(vma, pmd, addr, false, NULL);
|
2022-05-13 06:22:53 +03:00
|
|
|
/*
|
|
|
|
|
* For file-backed, the pmd could have been
|
|
|
|
|
* cleared; make sure pmd populated if
|
|
|
|
|
* necessary, then fall-through to pte level.
|
|
|
|
|
*/
|
|
|
|
|
change_pmd_prepare(vma, pmd, cp_flags);
|
2016-02-12 03:13:03 +03:00
|
|
|
} else {
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
/*
|
|
|
|
|
* change_huge_pmd() does not defer TLB flushes,
|
|
|
|
|
* so no need to propagate the tlb argument.
|
|
|
|
|
*/
|
|
|
|
|
int nr_ptes = change_huge_pmd(tlb, vma, pmd,
|
|
|
|
|
addr, newprot, cp_flags);
|
2013-10-07 14:28:49 +04:00
|
|
|
|
|
|
|
|
if (nr_ptes) {
|
2013-11-13 03:08:32 +04:00
|
|
|
if (nr_ptes == HPAGE_PMD_NR) {
|
|
|
|
|
pages += HPAGE_PMD_NR;
|
|
|
|
|
nr_huge_updates++;
|
|
|
|
|
}
|
2014-04-08 02:36:56 +04:00
|
|
|
|
|
|
|
|
/* huge pmd was handled */
|
mm/mprotect: add a cond_resched() inside change_pmd_range()
While testing on a large CPU system, detected the following RCU stall
many times over the span of the workload. This problem is solved by
adding a cond_resched() in the change_pmd_range() function.
INFO: rcu_sched detected stalls on CPUs/tasks:
154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612
(detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864)
Sending NMI from CPU 955 to CPUs 154:
NMI backtrace for cpu 154
CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3
NIP: c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18
REGS: 00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22422082 XER: 00000000
CFAR: 00000000006cf8f0 SOFTE: 1
GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000
GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00
GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00
GPR12: ffffffffffffffff c00000000fb25100
NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c
LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420
Call Trace:
flush_hash_range+0x48/0x100
__flush_tlb_pending+0x44/0xd0
hpte_need_flush+0x408/0x470
change_protection_range+0xaac/0xf10
change_prot_numa+0x30/0xb0
task_numa_work+0x2d0/0x3e0
task_work_run+0x130/0x190
do_notify_resume+0x118/0x120
ret_from_except_lite+0x70/0x74
Instruction dump:
60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378
e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008
Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-05 03:17:52 +03:00
|
|
|
goto next;
|
2013-10-07 14:28:49 +04:00
|
|
|
}
|
2012-11-19 06:14:23 +04:00
|
|
|
}
|
2014-04-08 02:36:55 +04:00
|
|
|
/* fall through, the trans huge pmd just split */
|
2011-01-14 02:47:04 +03:00
|
|
|
}
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
this_pages = change_pte_range(tlb, vma, pmd, addr, next,
|
|
|
|
|
newprot, cp_flags);
|
2013-10-07 14:29:14 +04:00
|
|
|
pages += this_pages;
|
mm/mprotect: add a cond_resched() inside change_pmd_range()
While testing on a large CPU system, detected the following RCU stall
many times over the span of the workload. This problem is solved by
adding a cond_resched() in the change_pmd_range() function.
INFO: rcu_sched detected stalls on CPUs/tasks:
154-....: (670 ticks this GP) idle=022/140000000000000/0 softirq=2825/2825 fqs=612
(detected by 955, t=6002 jiffies, g=4486, c=4485, q=90864)
Sending NMI from CPU 955 to CPUs 154:
NMI backtrace for cpu 154
CPU: 154 PID: 147071 Comm: workload Not tainted 4.15.0-rc3+ #3
NIP: c0000000000b3f64 LR: c0000000000b33d4 CTR: 000000000000aa18
REGS: 00000000a4b0fb44 TRAP: 0501 Not tainted (4.15.0-rc3+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22422082 XER: 00000000
CFAR: 00000000006cf8f0 SOFTE: 1
GPR00: 0010000000000000 c00003ef9b1cb8c0 c0000000010cc600 0000000000000000
GPR04: 8e0000018c32b200 40017b3858fd6e00 8e0000018c32b208 40017b3858fd6e00
GPR08: 8e0000018c32b210 40017b3858fd6e00 8e0000018c32b218 40017b3858fd6e00
GPR12: ffffffffffffffff c00000000fb25100
NIP [c0000000000b3f64] plpar_hcall9+0x44/0x7c
LR [c0000000000b33d4] pSeries_lpar_flush_hash_range+0x384/0x420
Call Trace:
flush_hash_range+0x48/0x100
__flush_tlb_pending+0x44/0xd0
hpte_need_flush+0x408/0x470
change_protection_range+0xaac/0xf10
change_prot_numa+0x30/0xb0
task_numa_work+0x2d0/0x3e0
task_work_run+0x130/0x190
do_notify_resume+0x118/0x120
ret_from_except_lite+0x70/0x74
Instruction dump:
60000000 f8810028 7ca42b78 7cc53378 7ce63b78 7d074378 7d284b78 7d495378
e9410060 e9610068 e9810070 44000022 <7d806378> e9810028 f88c0000 f8ac0008
Link: http://lkml.kernel.org/r/20171214140551.5794-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-05 03:17:52 +03:00
|
|
|
next:
|
|
|
|
|
cond_resched();
|
2005-04-17 02:20:36 +04:00
|
|
|
} while (pmd++, addr = next, addr != end);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
2018-12-28 11:38:09 +03:00
|
|
|
if (range.start)
|
|
|
|
|
mmu_notifier_invalidate_range_end(&range);
|
2014-04-08 02:36:57 +04:00
|
|
|
|
2013-11-13 03:08:32 +04:00
|
|
|
if (nr_huge_updates)
|
|
|
|
|
count_vm_numa_events(NUMA_HUGE_PTE_UPDATES, nr_huge_updates);
|
2012-11-19 06:14:23 +04:00
|
|
|
return pages;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
static inline unsigned long change_pud_range(struct mmu_gather *tlb,
|
|
|
|
|
struct vm_area_struct *vma, p4d_t *p4d, unsigned long addr,
|
|
|
|
|
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
|
|
|
|
pud_t *pud;
|
|
|
|
|
unsigned long next;
|
2012-11-19 06:14:23 +04:00
|
|
|
unsigned long pages = 0;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2017-03-09 17:24:07 +03:00
|
|
|
pud = pud_offset(p4d, addr);
|
2005-04-17 02:20:36 +04:00
|
|
|
do {
|
|
|
|
|
next = pud_addr_end(addr, end);
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
change_prepare(vma, pud, pmd, addr, cp_flags);
|
2005-04-17 02:20:36 +04:00
|
|
|
if (pud_none_or_clear_bad(pud))
|
|
|
|
|
continue;
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
pages += change_pmd_range(tlb, vma, pud, addr, next, newprot,
|
2020-04-07 06:05:45 +03:00
|
|
|
cp_flags);
|
2005-04-17 02:20:36 +04:00
|
|
|
} while (pud++, addr = next, addr != end);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
|
|
|
|
return pages;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
static inline unsigned long change_p4d_range(struct mmu_gather *tlb,
|
|
|
|
|
struct vm_area_struct *vma, pgd_t *pgd, unsigned long addr,
|
|
|
|
|
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
|
2017-03-09 17:24:07 +03:00
|
|
|
{
|
|
|
|
|
p4d_t *p4d;
|
|
|
|
|
unsigned long next;
|
|
|
|
|
unsigned long pages = 0;
|
|
|
|
|
|
|
|
|
|
p4d = p4d_offset(pgd, addr);
|
|
|
|
|
do {
|
|
|
|
|
next = p4d_addr_end(addr, end);
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
change_prepare(vma, p4d, pud, addr, cp_flags);
|
2017-03-09 17:24:07 +03:00
|
|
|
if (p4d_none_or_clear_bad(p4d))
|
|
|
|
|
continue;
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
pages += change_pud_range(tlb, vma, p4d, addr, next, newprot,
|
2020-04-07 06:05:45 +03:00
|
|
|
cp_flags);
|
2017-03-09 17:24:07 +03:00
|
|
|
} while (p4d++, addr = next, addr != end);
|
|
|
|
|
|
|
|
|
|
return pages;
|
|
|
|
|
}
|
|
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
static unsigned long change_protection_range(struct mmu_gather *tlb,
|
|
|
|
|
struct vm_area_struct *vma, unsigned long addr,
|
|
|
|
|
unsigned long end, pgprot_t newprot, unsigned long cp_flags)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
|
pgd_t *pgd;
|
|
|
|
|
unsigned long next;
|
2012-11-19 06:14:23 +04:00
|
|
|
unsigned long pages = 0;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
|
BUG_ON(addr >= end);
|
|
|
|
|
pgd = pgd_offset(mm, addr);
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
tlb_start_vma(tlb, vma);
|
2005-04-17 02:20:36 +04:00
|
|
|
do {
|
|
|
|
|
next = pgd_addr_end(addr, end);
|
mm/shmem: allow uffd wr-protect none pte for file-backed mem
File-backed memory differs from anonymous memory in that even if the pte
is missing, the data could still resides either in the file or in
page/swap cache. So when wr-protect a pte, we need to consider none ptes
too.
We do that by installing the uffd-wp pte markers when necessary. So when
there's a future write to the pte, the fault handler will go the special
path to first fault-in the page as read-only, then report to userfaultfd
server with the wr-protect message.
On the other hand, when unprotecting a page, it's also possible that the
pte got unmapped but replaced by the special uffd-wp marker. Then we'll
need to be able to recover from a uffd-wp pte marker into a none pte, so
that the next access to the page will fault in correctly as usual when
accessed the next time.
Special care needs to be taken throughout the change_protection_range()
process. Since now we allow user to wr-protect a none pte, we need to be
able to pre-populate the page table entries if we see (!anonymous &&
MM_CP_UFFD_WP) requests, otherwise change_protection_range() will always
skip when the pgtable entry does not exist.
For example, the pgtable can be missing for a whole chunk of 2M pmd, but
the page cache can exist for the 2M range. When we want to wr-protect one
4K page within the 2M pmd range, we need to pre-populate the pgtable and
install the pte marker showing that we want to get a message and block the
thread when the page cache of that 4K page is written. Without
pre-populating the pmd, change_protection() will simply skip that whole
pmd.
Note that this patch only covers the small pages (pte level) but not
covering any of the transparent huge pages yet. That will be done later,
and this patch will be a preparation for it too.
Link: https://lkml.kernel.org/r/20220405014850.14352-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 06:22:53 +03:00
|
|
|
change_prepare(vma, pgd, p4d, addr, cp_flags);
|
2005-04-17 02:20:36 +04:00
|
|
|
if (pgd_none_or_clear_bad(pgd))
|
|
|
|
|
continue;
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
pages += change_p4d_range(tlb, vma, pgd, addr, next, newprot,
|
2020-04-07 06:05:45 +03:00
|
|
|
cp_flags);
|
2005-04-17 02:20:36 +04:00
|
|
|
} while (pgd++, addr = next, addr != end);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
tlb_end_vma(tlb, vma);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
|
|
|
|
return pages;
|
|
|
|
|
}
|
|
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
unsigned long change_protection(struct mmu_gather *tlb,
|
|
|
|
|
struct vm_area_struct *vma, unsigned long start,
|
2012-11-19 06:14:23 +04:00
|
|
|
unsigned long end, pgprot_t newprot,
|
2020-04-07 06:05:45 +03:00
|
|
|
unsigned long cp_flags)
|
2012-11-19 06:14:23 +04:00
|
|
|
{
|
|
|
|
|
unsigned long pages;
|
|
|
|
|
|
userfaultfd: wp: apply _PAGE_UFFD_WP bit
Firstly, introduce two new flags MM_CP_UFFD_WP[_RESOLVE] for
change_protection() when used with uffd-wp and make sure the two new flags
are exclusively used. Then,
- For MM_CP_UFFD_WP: apply the _PAGE_UFFD_WP bit and remove _PAGE_RW
when a range of memory is write protected by uffd
- For MM_CP_UFFD_WP_RESOLVE: remove the _PAGE_UFFD_WP bit and recover
_PAGE_RW when write protection is resolved from userspace
And use this new interface in mwriteprotect_range() to replace the old
MM_CP_DIRTY_ACCT.
Do this change for both PTEs and huge PMDs. Then we can start to identify
which PTE/PMD is write protected by general (e.g., COW or soft dirty
tracking), and which is for userfaultfd-wp.
Since we should keep the _PAGE_UFFD_WP when doing pte_modify(), add it
into _PAGE_CHG_MASK as well. Meanwhile, since we have this new bit, we
can be even more strict when detecting uffd-wp page faults in either
do_wp_page() or wp_huge_pmd().
After we're with _PAGE_UFFD_WP, a special case is when a page is both
protected by the general COW logic and also userfault-wp. Here the
userfault-wp will have higher priority and will be handled first. Only
after the uffd-wp bit is cleared on the PTE/PMD will we continue to handle
the general COW. These are the steps on what will happen with such a
page:
1. CPU accesses write protected shared page (so both protected by
general COW and uffd-wp), blocked by uffd-wp first because in
do_wp_page we'll handle uffd-wp first, so it has higher priority
than general COW.
2. Uffd service thread receives the request, do UFFDIO_WRITEPROTECT
to remove the uffd-wp bit upon the PTE/PMD. However here we
still keep the write bit cleared. Notify the blocked CPU.
3. The blocked CPU resumes the page fault process with a fault
retry, during retry it'll notice it was not with the uffd-wp bit
this time but it is still write protected by general COW, then
it'll go though the COW path in the fault handler, copy the page,
apply write bit where necessary, and retry again.
4. The CPU will be able to access this page with write bit set.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-8-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:05:49 +03:00
|
|
|
BUG_ON((cp_flags & MM_CP_UFFD_WP_ALL) == MM_CP_UFFD_WP_ALL);
|
|
|
|
|
|
2012-11-19 06:14:23 +04:00
|
|
|
if (is_vm_hugetlb_page(vma))
|
2022-05-13 06:22:54 +03:00
|
|
|
pages = hugetlb_change_protection(vma, start, end, newprot,
|
|
|
|
|
cp_flags);
|
2012-11-19 06:14:23 +04:00
|
|
|
else
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
pages = change_protection_range(tlb, vma, start, end, newprot,
|
2020-04-07 06:05:45 +03:00
|
|
|
cp_flags);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
|
|
|
|
return pages;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
2018-06-14 01:48:27 +03:00
|
|
|
static int prot_none_pte_entry(pte_t *pte, unsigned long addr,
|
|
|
|
|
unsigned long next, struct mm_walk *walk)
|
|
|
|
|
{
|
|
|
|
|
return pfn_modify_allowed(pte_pfn(*pte), *(pgprot_t *)(walk->private)) ?
|
|
|
|
|
0 : -EACCES;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int prot_none_hugetlb_entry(pte_t *pte, unsigned long hmask,
|
|
|
|
|
unsigned long addr, unsigned long next,
|
|
|
|
|
struct mm_walk *walk)
|
|
|
|
|
{
|
|
|
|
|
return pfn_modify_allowed(pte_pfn(*pte), *(pgprot_t *)(walk->private)) ?
|
|
|
|
|
0 : -EACCES;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int prot_none_test(unsigned long addr, unsigned long next,
|
|
|
|
|
struct mm_walk *walk)
|
|
|
|
|
{
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2019-08-28 17:19:54 +03:00
|
|
|
static const struct mm_walk_ops prot_none_walk_ops = {
|
|
|
|
|
.pte_entry = prot_none_pte_entry,
|
|
|
|
|
.hugetlb_entry = prot_none_hugetlb_entry,
|
|
|
|
|
.test_walk = prot_none_test,
|
|
|
|
|
};
|
2018-06-14 01:48:27 +03:00
|
|
|
|
2007-07-19 12:48:16 +04:00
|
|
|
int
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
mprotect_fixup(struct mmu_gather *tlb, struct vm_area_struct *vma,
|
|
|
|
|
struct vm_area_struct **pprev, unsigned long start,
|
|
|
|
|
unsigned long end, unsigned long newflags)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
|
|
|
|
struct mm_struct *mm = vma->vm_mm;
|
|
|
|
|
unsigned long oldflags = vma->vm_flags;
|
|
|
|
|
long nrpages = (end - start) >> PAGE_SHIFT;
|
2022-11-08 20:46:49 +03:00
|
|
|
unsigned int mm_cp_flags = 0;
|
2005-04-17 02:20:36 +04:00
|
|
|
unsigned long charged = 0;
|
|
|
|
|
pgoff_t pgoff;
|
|
|
|
|
int error;
|
|
|
|
|
|
|
|
|
|
if (newflags == oldflags) {
|
|
|
|
|
*pprev = vma;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2018-06-14 01:48:27 +03:00
|
|
|
/*
|
|
|
|
|
* Do PROT_NONE PFN permission checks here when we can still
|
|
|
|
|
* bail out without undoing a lot of state. This is a rather
|
|
|
|
|
* uncommon case, so doesn't need to be very optimized.
|
|
|
|
|
*/
|
|
|
|
|
if (arch_has_pfn_modify_check() &&
|
|
|
|
|
(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) &&
|
2020-04-11 00:33:09 +03:00
|
|
|
(newflags & VM_ACCESS_FLAGS) == 0) {
|
2019-08-28 17:19:54 +03:00
|
|
|
pgprot_t new_pgprot = vm_get_page_prot(newflags);
|
|
|
|
|
|
|
|
|
|
error = walk_page_range(current->mm, start, end,
|
|
|
|
|
&prot_none_walk_ops, &new_pgprot);
|
2018-06-14 01:48:27 +03:00
|
|
|
if (error)
|
|
|
|
|
return error;
|
|
|
|
|
}
|
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
/*
|
|
|
|
|
* If we make a private mapping writable we increase our commit;
|
|
|
|
|
* but (without finer accounting) cannot reduce our commit if we
|
2009-02-10 17:02:27 +03:00
|
|
|
* make it unwritable again. hugetlb mapping were accounted for
|
|
|
|
|
* even if read-only so there is no need to account for them here
|
2005-04-17 02:20:36 +04:00
|
|
|
*/
|
|
|
|
|
if (newflags & VM_WRITE) {
|
2016-01-15 02:22:07 +03:00
|
|
|
/* Check space limits when area turns into data. */
|
|
|
|
|
if (!may_expand_vm(mm, newflags, nrpages) &&
|
|
|
|
|
may_expand_vm(mm, oldflags, nrpages))
|
|
|
|
|
return -ENOMEM;
|
2009-02-10 17:02:27 +03:00
|
|
|
if (!(oldflags & (VM_ACCOUNT|VM_WRITE|VM_HUGETLB|
|
2008-07-24 08:27:28 +04:00
|
|
|
VM_SHARED|VM_NORESERVE))) {
|
2005-04-17 02:20:36 +04:00
|
|
|
charged = nrpages;
|
2012-02-13 07:58:52 +04:00
|
|
|
if (security_vm_enough_memory_mm(mm, charged))
|
2005-04-17 02:20:36 +04:00
|
|
|
return -ENOMEM;
|
|
|
|
|
newflags |= VM_ACCOUNT;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* First try to merge with previous and/or next vma.
|
|
|
|
|
*/
|
|
|
|
|
pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
|
|
|
|
|
*pprev = vma_merge(mm, *pprev, start, end, newflags,
|
2015-09-05 01:46:24 +03:00
|
|
|
vma->anon_vma, vma->vm_file, pgoff, vma_policy(vma),
|
2022-03-05 07:28:51 +03:00
|
|
|
vma->vm_userfaultfd_ctx, anon_vma_name(vma));
|
2005-04-17 02:20:36 +04:00
|
|
|
if (*pprev) {
|
|
|
|
|
vma = *pprev;
|
mm: vma_merge: fix vm_page_prot SMP race condition against rmap_walk
The rmap_walk can access vm_page_prot (and potentially vm_flags in the
pte/pmd manipulations). So it's not safe to wait the caller to update
the vm_page_prot/vm_flags after vma_merge returned potentially removing
the "next" vma and extending the "current" vma over the
next->vm_start,vm_end range, but still with the "current" vma
vm_page_prot, after releasing the rmap locks.
The vm_page_prot/vm_flags must be transferred from the "next" vma to the
current vma while vma_merge still holds the rmap locks.
The side effect of this race condition is pte corruption during migrate
as remove_migration_ptes when run on a address of the "next" vma that
got removed, used the vm_page_prot of the current vma.
migrate mprotect
------------ -------------
migrating in "next" vma
vma_merge() # removes "next" vma and
# extends "current" vma
# current vma is not with
# vm_page_prot updated
remove_migration_ptes
read vm_page_prot of current "vma"
establish pte with wrong permissions
vm_set_page_prot(vma) # too late!
change_protection in the old vma range
only, next range is not updated
This caused segmentation faults and potentially memory corruption in
heavy mprotect loads with some light page migration caused by compaction
in the background.
Hugh Dickins pointed out the comment about the Odd case 8 in vma_merge
which confirms the case 8 is only buggy one where the race can trigger,
in all other vma_merge cases the above cannot happen.
This fix removes the oddness factor from case 8 and it converts it from:
AAAA
PPPPNNNNXXXX -> PPPPNNNNNNNN
to:
AAAA
PPPPNNNNXXXX -> PPPPXXXXXXXX
XXXX has the right vma properties for the whole merged vma returned by
vma_adjust, so it solves the problem fully. It has the added benefits
that the callers could stop updating vma properties when vma_merge
succeeds however the callers are not updated by this patch (there are
bits like VM_SOFTDIRTY that still need special care for the whole range,
as the vma merging ignores them, but as long as they're not processed by
rmap walks and instead they're accessed with the mmap_sem at least for
reading, they are fine not to be updated within vma_adjust before
releasing the rmap_locks).
Link: http://lkml.kernel.org/r/1474309513-20313-1-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Aditya Mandaleeka <adityam@microsoft.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jan Vorlicek <janvorli@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 03:01:28 +03:00
|
|
|
VM_WARN_ON((vma->vm_flags ^ newflags) & ~VM_SOFTDIRTY);
|
2005-04-17 02:20:36 +04:00
|
|
|
goto success;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*pprev = vma;
|
|
|
|
|
|
|
|
|
|
if (start != vma->vm_start) {
|
|
|
|
|
error = split_vma(mm, vma, start, 1);
|
|
|
|
|
if (error)
|
|
|
|
|
goto fail;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (end != vma->vm_end) {
|
|
|
|
|
error = split_vma(mm, vma, end, 0);
|
|
|
|
|
if (error)
|
|
|
|
|
goto fail;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
success:
|
|
|
|
|
/*
|
2020-06-09 07:33:54 +03:00
|
|
|
* vm_flags and vm_page_prot are protected by the mmap_lock
|
2005-04-17 02:20:36 +04:00
|
|
|
* held in write mode.
|
|
|
|
|
*/
|
|
|
|
|
vma->vm_flags = newflags;
|
2022-11-08 20:46:49 +03:00
|
|
|
if (vma_wants_manual_pte_write_upgrade(vma))
|
|
|
|
|
mm_cp_flags |= MM_CP_TRY_CHANGE_WRITABLE;
|
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit c9d0bf241451 ("mm: uncached vma support with writenotify").
Signed-off-by: Peter Feiner <pfeiner@google.com>
Reported-by: Peter Feiner <pfeiner@google.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:55:46 +04:00
|
|
|
vma_set_page_prot(vma);
|
2006-09-26 10:30:57 +04:00
|
|
|
|
2022-11-08 20:46:49 +03:00
|
|
|
change_protection(tlb, vma, start, end, vma->vm_page_prot, mm_cp_flags);
|
2012-11-19 06:14:23 +04:00
|
|
|
|
mm: fix mprotect() behaviour on VM_LOCKED VMAs
On mlock(2) we trigger COW on private writable VMA to avoid faults in
future.
mm/gup.c:
840 long populate_vma_page_range(struct vm_area_struct *vma,
841 unsigned long start, unsigned long end, int *nonblocking)
842 {
...
855 * We want to touch writable mappings with a write fault in order
856 * to break COW, except for shared mappings because these don't COW
857 * and we would not want to dirty them for nothing.
858 */
859 if ((vma->vm_flags & (VM_WRITE | VM_SHARED)) == VM_WRITE)
860 gup_flags |= FOLL_WRITE;
But we miss this case when we make VM_LOCKED VMA writeable via
mprotect(2). The test case:
#define _GNU_SOURCE
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/resource.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/types.h>
#define PAGE_SIZE 4096
int main(int argc, char **argv)
{
struct rusage usage;
long before;
char *p;
int fd;
/* Create a file and populate first page of page cache */
fd = open("/tmp", O_TMPFILE | O_RDWR, S_IRUSR | S_IWUSR);
write(fd, "1", 1);
/* Create a *read-only* *private* mapping of the file */
p = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd, 0);
/*
* Since the mapping is read-only, mlock() will populate the mapping
* with PTEs pointing to page cache without triggering COW.
*/
mlock(p, PAGE_SIZE);
/*
* Mapping became read-write, but it's still populated with PTEs
* pointing to page cache.
*/
mprotect(p, PAGE_SIZE, PROT_READ | PROT_WRITE);
getrusage(RUSAGE_SELF, &usage);
before = usage.ru_minflt;
/* Trigger COW: fault in mlock()ed VMA. */
*p = 1;
getrusage(RUSAGE_SELF, &usage);
printf("faults: %ld\n", usage.ru_minflt - before);
return 0;
}
$ ./test
faults: 1
Let's fix it by triggering populating of VMA in mprotect_fixup() on this
condition. We don't care about population error as we don't in other
similar cases i.e. mremap.
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 02:56:10 +03:00
|
|
|
/*
|
|
|
|
|
* Private VM_LOCKED VMA becoming writable: trigger COW to avoid major
|
|
|
|
|
* fault on access.
|
|
|
|
|
*/
|
|
|
|
|
if ((oldflags & (VM_WRITE | VM_SHARED | VM_LOCKED)) == VM_LOCKED &&
|
|
|
|
|
(newflags & VM_WRITE)) {
|
|
|
|
|
populate_vma_page_range(vma, start, end, NULL);
|
|
|
|
|
}
|
|
|
|
|
|
2016-01-15 02:22:07 +03:00
|
|
|
vm_stat_account(mm, oldflags, -nrpages);
|
|
|
|
|
vm_stat_account(mm, newflags, nrpages);
|
2010-11-08 22:29:07 +03:00
|
|
|
perf_event_mmap(vma);
|
2005-04-17 02:20:36 +04:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
fail:
|
|
|
|
|
vm_unacct_memory(charged);
|
|
|
|
|
return error;
|
|
|
|
|
}
|
|
|
|
|
|
mm: Implement new pkey_mprotect() system call
pkey_mprotect() is just like mprotect, except it also takes a
protection key as an argument. On systems that do not support
protection keys, it still works, but requires that key=0.
Otherwise it does exactly what mprotect does.
I expect it to get used like this, if you want to guarantee that
any mapping you create can *never* be accessed without the right
protection keys set up.
int real_prot = PROT_READ|PROT_WRITE;
pkey = pkey_alloc(0, PKEY_DENY_ACCESS);
ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey);
This way, there is *no* window where the mapping is accessible
since it was always either PROT_NONE or had a protection key set
that denied all access.
We settled on 'unsigned long' for the type of the key here. We
only need 4 bits on x86 today, but I figured that other
architectures might need some more space.
Semantically, we have a bit of a problem if we combine this
syscall with our previously-introduced execute-only support:
What do we do when we mix execute-only pkey use with
pkey_mprotect() use? For instance:
pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6
mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY?
mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again?
To solve that, we make the plain-mprotect()-initiated execute-only
support only apply to VMAs that have the default protection key (0)
set on them.
Proposed semantics:
1. protection key 0 is special and represents the default,
"unassigned" protection key. It is always allocated.
2. mprotect() never affects a mapping's pkey_mprotect()-assigned
protection key. A protection key of 0 (even if set explicitly)
represents an unassigned protection key.
2a. mprotect(PROT_EXEC) on a mapping with an assigned protection
key may or may not result in a mapping with execute-only
properties. pkey_mprotect() plus pkey_set() on all threads
should be used to _guarantee_ execute-only semantics if this
is not a strong enough semantic.
3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The
kernel will internally attempt to allocate and dedicate a
protection key for the purpose of execute-only mappings. This
may not be possible in cases where there are no free protection
keys available. It can also happen, of course, in situations
where there is no hardware support for protection keys.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:12 +03:00
|
|
|
/*
|
|
|
|
|
* pkey==-1 when doing a legacy mprotect()
|
|
|
|
|
*/
|
|
|
|
|
static int do_mprotect_pkey(unsigned long start, size_t len,
|
|
|
|
|
unsigned long prot, int pkey)
|
2005-04-17 02:20:36 +04:00
|
|
|
{
|
mm/core, x86/mm/pkeys: Add execute-only protection keys support
Protection keys provide new page-based protection in hardware.
But, they have an interesting attribute: they only affect data
accesses and never affect instruction fetches. That means that
if we set up some memory which is set as "access-disabled" via
protection keys, we can still execute from it.
This patch uses protection keys to set up mappings to do just that.
If a user calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only without PROT_READ/WRITE), the kernel will
notice this, and set a special protection key on the memory. It
also sets the appropriate bits in the Protection Keys User Rights
(PKRU) register so that the memory becomes unreadable and
unwritable.
I haven't found any userspace that does this today. With this
facility in place, we expect userspace to move to use it
eventually. Userspace _could_ start doing this today. Any
PROT_EXEC calls get converted to PROT_READ inside the kernel, and
would transparently be upgraded to "true" PROT_EXEC with this
code. IOW, userspace never has to do any PROT_EXEC runtime
detection.
This feature provides enhanced protection against leaking
executable memory contents. This helps thwart attacks which are
attempting to find ROP gadgets on the fly.
But, the security provided by this approach is not comprehensive.
The PKRU register which controls access permissions is a normal
user register writable from unprivileged userspace. An attacker
who can execute the 'wrpkru' instruction can easily disable the
protection provided by this feature.
The protection key that is used for execute-only support is
permanently dedicated at compile time. This is fine for now
because there is currently no API to set a protection key other
than this one.
Despite there being a constant PKRU value across the entire
system, we do not set it unless this feature is in use in a
process. That is to preserve the PKRU XSAVE 'init state',
which can lead to faster context switches.
PKRU *is* a user register and the kernel is modifying it. That
means that code doing:
pkru = rdpkru()
pkru |= 0x100;
mmap(..., PROT_EXEC);
wrpkru(pkru);
could lose the bits in PKRU that enforce execute-only
permissions. To avoid this, we suggest avoiding ever calling
mmap() or mprotect() when the PKRU value is expected to be
unstable.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Piotr Kwapulinski <kwapulinski.piotr@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: keescook@google.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210240.CB4BB5CA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-13 00:02:40 +03:00
|
|
|
unsigned long nstart, end, tmp, reqprot;
|
2005-04-17 02:20:36 +04:00
|
|
|
struct vm_area_struct *vma, *prev;
|
2022-07-04 14:41:12 +03:00
|
|
|
int error;
|
2005-04-17 02:20:36 +04:00
|
|
|
const int grows = prot & (PROT_GROWSDOWN|PROT_GROWSUP);
|
2016-03-23 00:27:51 +03:00
|
|
|
const bool rier = (current->personality & READ_IMPLIES_EXEC) &&
|
|
|
|
|
(prot & PROT_READ);
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
struct mmu_gather tlb;
|
2022-09-06 22:49:02 +03:00
|
|
|
MA_STATE(mas, ¤t->mm->mm_mt, 0, 0);
|
2016-03-23 00:27:51 +03:00
|
|
|
|
mm: untag user pointers passed to memory syscalls
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
This patch allows tagged pointers to be passed to the following memory
syscalls: get_mempolicy, madvise, mbind, mincore, mlock, mlock2, mprotect,
mremap, msync, munlock, move_pages.
The mmap and mremap syscalls do not currently accept tagged addresses.
Architectures may interpret the tag as a background colour for the
corresponding vma.
Link: http://lkml.kernel.org/r/aaf0c0969d46b2feb9017f3e1b3ef3970b633d91.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-26 02:48:30 +03:00
|
|
|
start = untagged_addr(start);
|
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
prot &= ~(PROT_GROWSDOWN|PROT_GROWSUP);
|
|
|
|
|
if (grows == (PROT_GROWSDOWN|PROT_GROWSUP)) /* can't be both */
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
if (start & ~PAGE_MASK)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
if (!len)
|
|
|
|
|
return 0;
|
|
|
|
|
len = PAGE_ALIGN(len);
|
|
|
|
|
end = start + len;
|
|
|
|
|
if (end <= start)
|
|
|
|
|
return -ENOMEM;
|
2018-02-21 20:15:49 +03:00
|
|
|
if (!arch_validate_prot(prot, start))
|
2005-04-17 02:20:36 +04:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
reqprot = prot;
|
|
|
|
|
|
2020-06-09 07:33:25 +03:00
|
|
|
if (mmap_write_lock_killable(current->mm))
|
2016-05-24 02:25:27 +03:00
|
|
|
return -EINTR;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
/*
|
|
|
|
|
* If userspace did not allocate the pkey, do not let
|
|
|
|
|
* them use it here.
|
|
|
|
|
*/
|
|
|
|
|
error = -EINVAL;
|
|
|
|
|
if ((pkey != -1) && !mm_pkey_is_allocated(current->mm, pkey))
|
|
|
|
|
goto out;
|
|
|
|
|
|
2022-09-06 22:49:02 +03:00
|
|
|
mas_set(&mas, start);
|
|
|
|
|
vma = mas_find(&mas, ULONG_MAX);
|
2005-04-17 02:20:36 +04:00
|
|
|
error = -ENOMEM;
|
|
|
|
|
if (!vma)
|
|
|
|
|
goto out;
|
2021-11-05 23:39:03 +03:00
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
if (unlikely(grows & PROT_GROWSDOWN)) {
|
|
|
|
|
if (vma->vm_start >= end)
|
|
|
|
|
goto out;
|
|
|
|
|
start = vma->vm_start;
|
|
|
|
|
error = -EINVAL;
|
|
|
|
|
if (!(vma->vm_flags & VM_GROWSDOWN))
|
|
|
|
|
goto out;
|
2012-12-19 02:23:17 +04:00
|
|
|
} else {
|
2005-04-17 02:20:36 +04:00
|
|
|
if (vma->vm_start > start)
|
|
|
|
|
goto out;
|
|
|
|
|
if (unlikely(grows & PROT_GROWSUP)) {
|
|
|
|
|
end = vma->vm_end;
|
|
|
|
|
error = -EINVAL;
|
|
|
|
|
if (!(vma->vm_flags & VM_GROWSUP))
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
}
|
2021-11-05 23:39:03 +03:00
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
if (start > vma->vm_start)
|
|
|
|
|
prev = vma;
|
2021-11-05 23:39:03 +03:00
|
|
|
else
|
2022-09-06 22:49:02 +03:00
|
|
|
prev = mas_prev(&mas, 0);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
tlb_gather_mmu(&tlb, current->mm);
|
2005-04-17 02:20:36 +04:00
|
|
|
for (nstart = start ; ; ) {
|
2016-07-29 19:30:13 +03:00
|
|
|
unsigned long mask_off_old_flags;
|
2005-04-17 02:20:36 +04:00
|
|
|
unsigned long newflags;
|
mm: Implement new pkey_mprotect() system call
pkey_mprotect() is just like mprotect, except it also takes a
protection key as an argument. On systems that do not support
protection keys, it still works, but requires that key=0.
Otherwise it does exactly what mprotect does.
I expect it to get used like this, if you want to guarantee that
any mapping you create can *never* be accessed without the right
protection keys set up.
int real_prot = PROT_READ|PROT_WRITE;
pkey = pkey_alloc(0, PKEY_DENY_ACCESS);
ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey);
This way, there is *no* window where the mapping is accessible
since it was always either PROT_NONE or had a protection key set
that denied all access.
We settled on 'unsigned long' for the type of the key here. We
only need 4 bits on x86 today, but I figured that other
architectures might need some more space.
Semantically, we have a bit of a problem if we combine this
syscall with our previously-introduced execute-only support:
What do we do when we mix execute-only pkey use with
pkey_mprotect() use? For instance:
pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6
mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY?
mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again?
To solve that, we make the plain-mprotect()-initiated execute-only
support only apply to VMAs that have the default protection key (0)
set on them.
Proposed semantics:
1. protection key 0 is special and represents the default,
"unassigned" protection key. It is always allocated.
2. mprotect() never affects a mapping's pkey_mprotect()-assigned
protection key. A protection key of 0 (even if set explicitly)
represents an unassigned protection key.
2a. mprotect(PROT_EXEC) on a mapping with an assigned protection
key may or may not result in a mapping with execute-only
properties. pkey_mprotect() plus pkey_set() on all threads
should be used to _guarantee_ execute-only semantics if this
is not a strong enough semantic.
3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The
kernel will internally attempt to allocate and dedicate a
protection key for the purpose of execute-only mappings. This
may not be possible in cases where there are no free protection
keys available. It can also happen, of course, in situations
where there is no hardware support for protection keys.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:12 +03:00
|
|
|
int new_vma_pkey;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2012-12-19 02:23:17 +04:00
|
|
|
/* Here we know that vma->vm_start <= nstart < vma->vm_end. */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2016-03-23 00:27:51 +03:00
|
|
|
/* Does the application expect PROT_READ to imply PROT_EXEC */
|
|
|
|
|
if (rier && (vma->vm_flags & VM_MAYEXEC))
|
|
|
|
|
prot |= PROT_EXEC;
|
|
|
|
|
|
2016-07-29 19:30:13 +03:00
|
|
|
/*
|
|
|
|
|
* Each mprotect() call explicitly passes r/w/x permissions.
|
|
|
|
|
* If a permission is not passed to mprotect(), it must be
|
|
|
|
|
* cleared from the VMA.
|
|
|
|
|
*/
|
2022-10-19 06:49:43 +03:00
|
|
|
mask_off_old_flags = VM_ACCESS_FLAGS | VM_FLAGS_CLEAR;
|
2016-07-29 19:30:13 +03:00
|
|
|
|
mm: Implement new pkey_mprotect() system call
pkey_mprotect() is just like mprotect, except it also takes a
protection key as an argument. On systems that do not support
protection keys, it still works, but requires that key=0.
Otherwise it does exactly what mprotect does.
I expect it to get used like this, if you want to guarantee that
any mapping you create can *never* be accessed without the right
protection keys set up.
int real_prot = PROT_READ|PROT_WRITE;
pkey = pkey_alloc(0, PKEY_DENY_ACCESS);
ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey);
This way, there is *no* window where the mapping is accessible
since it was always either PROT_NONE or had a protection key set
that denied all access.
We settled on 'unsigned long' for the type of the key here. We
only need 4 bits on x86 today, but I figured that other
architectures might need some more space.
Semantically, we have a bit of a problem if we combine this
syscall with our previously-introduced execute-only support:
What do we do when we mix execute-only pkey use with
pkey_mprotect() use? For instance:
pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6
mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY?
mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again?
To solve that, we make the plain-mprotect()-initiated execute-only
support only apply to VMAs that have the default protection key (0)
set on them.
Proposed semantics:
1. protection key 0 is special and represents the default,
"unassigned" protection key. It is always allocated.
2. mprotect() never affects a mapping's pkey_mprotect()-assigned
protection key. A protection key of 0 (even if set explicitly)
represents an unassigned protection key.
2a. mprotect(PROT_EXEC) on a mapping with an assigned protection
key may or may not result in a mapping with execute-only
properties. pkey_mprotect() plus pkey_set() on all threads
should be used to _guarantee_ execute-only semantics if this
is not a strong enough semantic.
3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The
kernel will internally attempt to allocate and dedicate a
protection key for the purpose of execute-only mappings. This
may not be possible in cases where there are no free protection
keys available. It can also happen, of course, in situations
where there is no hardware support for protection keys.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:12 +03:00
|
|
|
new_vma_pkey = arch_override_mprotect_pkey(vma, prot, pkey);
|
|
|
|
|
newflags = calc_vm_prot_bits(prot, new_vma_pkey);
|
2016-07-29 19:30:13 +03:00
|
|
|
newflags |= (vma->vm_flags & ~mask_off_old_flags);
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2005-09-21 20:55:39 +04:00
|
|
|
/* newflags >> 4 shift VM_MAY% in place of VM_% */
|
2020-04-11 00:33:09 +03:00
|
|
|
if ((newflags & ~(newflags >> 4)) & VM_ACCESS_FLAGS) {
|
2005-04-17 02:20:36 +04:00
|
|
|
error = -EACCES;
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
|
|
|
|
|
2019-11-25 20:27:06 +03:00
|
|
|
/* Allow architectures to sanity-check the new flags */
|
|
|
|
|
if (!arch_validate_flags(newflags)) {
|
|
|
|
|
error = -EINVAL;
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2019-11-25 20:27:06 +03:00
|
|
|
}
|
|
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
error = security_file_mprotect(vma, reqprot, prot);
|
|
|
|
|
if (error)
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
|
tmp = vma->vm_end;
|
|
|
|
|
if (tmp > end)
|
|
|
|
|
tmp = end;
|
2020-11-13 01:01:21 +03:00
|
|
|
|
2021-02-24 23:04:46 +03:00
|
|
|
if (vma->vm_ops && vma->vm_ops->mprotect) {
|
2020-11-13 01:01:21 +03:00
|
|
|
error = vma->vm_ops->mprotect(vma, nstart, tmp, newflags);
|
2021-02-24 23:04:46 +03:00
|
|
|
if (error)
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2021-02-24 23:04:46 +03:00
|
|
|
}
|
2020-11-13 01:01:21 +03:00
|
|
|
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
error = mprotect_fixup(&tlb, vma, &prev, nstart, tmp, newflags);
|
2005-04-17 02:20:36 +04:00
|
|
|
if (error)
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2020-11-13 01:01:21 +03:00
|
|
|
|
2005-04-17 02:20:36 +04:00
|
|
|
nstart = tmp;
|
|
|
|
|
|
|
|
|
|
if (nstart < prev->vm_end)
|
|
|
|
|
nstart = prev->vm_end;
|
|
|
|
|
if (nstart >= end)
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2022-09-06 22:49:02 +03:00
|
|
|
vma = find_vma(current->mm, prev->vm_end);
|
2005-04-17 02:20:36 +04:00
|
|
|
if (!vma || vma->vm_start != nstart) {
|
|
|
|
|
error = -ENOMEM;
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
break;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
2016-03-23 00:27:51 +03:00
|
|
|
prot = reqprot;
|
2005-04-17 02:20:36 +04:00
|
|
|
}
|
mm/mprotect: use mmu_gather
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 04:20:50 +03:00
|
|
|
tlb_finish_mmu(&tlb);
|
2005-04-17 02:20:36 +04:00
|
|
|
out:
|
2020-06-09 07:33:25 +03:00
|
|
|
mmap_write_unlock(current->mm);
|
2005-04-17 02:20:36 +04:00
|
|
|
return error;
|
|
|
|
|
}
|
mm: Implement new pkey_mprotect() system call
pkey_mprotect() is just like mprotect, except it also takes a
protection key as an argument. On systems that do not support
protection keys, it still works, but requires that key=0.
Otherwise it does exactly what mprotect does.
I expect it to get used like this, if you want to guarantee that
any mapping you create can *never* be accessed without the right
protection keys set up.
int real_prot = PROT_READ|PROT_WRITE;
pkey = pkey_alloc(0, PKEY_DENY_ACCESS);
ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey);
This way, there is *no* window where the mapping is accessible
since it was always either PROT_NONE or had a protection key set
that denied all access.
We settled on 'unsigned long' for the type of the key here. We
only need 4 bits on x86 today, but I figured that other
architectures might need some more space.
Semantically, we have a bit of a problem if we combine this
syscall with our previously-introduced execute-only support:
What do we do when we mix execute-only pkey use with
pkey_mprotect() use? For instance:
pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6
mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY?
mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again?
To solve that, we make the plain-mprotect()-initiated execute-only
support only apply to VMAs that have the default protection key (0)
set on them.
Proposed semantics:
1. protection key 0 is special and represents the default,
"unassigned" protection key. It is always allocated.
2. mprotect() never affects a mapping's pkey_mprotect()-assigned
protection key. A protection key of 0 (even if set explicitly)
represents an unassigned protection key.
2a. mprotect(PROT_EXEC) on a mapping with an assigned protection
key may or may not result in a mapping with execute-only
properties. pkey_mprotect() plus pkey_set() on all threads
should be used to _guarantee_ execute-only semantics if this
is not a strong enough semantic.
3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The
kernel will internally attempt to allocate and dedicate a
protection key for the purpose of execute-only mappings. This
may not be possible in cases where there are no free protection
keys available. It can also happen, of course, in situations
where there is no hardware support for protection keys.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:12 +03:00
|
|
|
|
|
|
|
|
SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
|
|
|
|
|
unsigned long, prot)
|
|
|
|
|
{
|
|
|
|
|
return do_mprotect_pkey(start, len, prot, -1);
|
|
|
|
|
}
|
|
|
|
|
|
2016-12-13 03:43:09 +03:00
|
|
|
#ifdef CONFIG_ARCH_HAS_PKEYS
|
|
|
|
|
|
mm: Implement new pkey_mprotect() system call
pkey_mprotect() is just like mprotect, except it also takes a
protection key as an argument. On systems that do not support
protection keys, it still works, but requires that key=0.
Otherwise it does exactly what mprotect does.
I expect it to get used like this, if you want to guarantee that
any mapping you create can *never* be accessed without the right
protection keys set up.
int real_prot = PROT_READ|PROT_WRITE;
pkey = pkey_alloc(0, PKEY_DENY_ACCESS);
ptr = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
ret = pkey_mprotect(ptr, PAGE_SIZE, real_prot, pkey);
This way, there is *no* window where the mapping is accessible
since it was always either PROT_NONE or had a protection key set
that denied all access.
We settled on 'unsigned long' for the type of the key here. We
only need 4 bits on x86 today, but I figured that other
architectures might need some more space.
Semantically, we have a bit of a problem if we combine this
syscall with our previously-introduced execute-only support:
What do we do when we mix execute-only pkey use with
pkey_mprotect() use? For instance:
pkey_mprotect(ptr, PAGE_SIZE, PROT_WRITE, 6); // set pkey=6
mprotect(ptr, PAGE_SIZE, PROT_EXEC); // set pkey=X_ONLY_PKEY?
mprotect(ptr, PAGE_SIZE, PROT_WRITE); // is pkey=6 again?
To solve that, we make the plain-mprotect()-initiated execute-only
support only apply to VMAs that have the default protection key (0)
set on them.
Proposed semantics:
1. protection key 0 is special and represents the default,
"unassigned" protection key. It is always allocated.
2. mprotect() never affects a mapping's pkey_mprotect()-assigned
protection key. A protection key of 0 (even if set explicitly)
represents an unassigned protection key.
2a. mprotect(PROT_EXEC) on a mapping with an assigned protection
key may or may not result in a mapping with execute-only
properties. pkey_mprotect() plus pkey_set() on all threads
should be used to _guarantee_ execute-only semantics if this
is not a strong enough semantic.
3. mprotect(PROT_EXEC) may result in an "execute-only" mapping. The
kernel will internally attempt to allocate and dedicate a
protection key for the purpose of execute-only mappings. This
may not be possible in cases where there are no free protection
keys available. It can also happen, of course, in situations
where there is no hardware support for protection keys.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163012.3DDD36C4@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:12 +03:00
|
|
|
SYSCALL_DEFINE4(pkey_mprotect, unsigned long, start, size_t, len,
|
|
|
|
|
unsigned long, prot, int, pkey)
|
|
|
|
|
{
|
|
|
|
|
return do_mprotect_pkey(start, len, prot, pkey);
|
|
|
|
|
}
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
|
|
|
|
|
SYSCALL_DEFINE2(pkey_alloc, unsigned long, flags, unsigned long, init_val)
|
|
|
|
|
{
|
|
|
|
|
int pkey;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
/* No flags supported yet. */
|
|
|
|
|
if (flags)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
/* check for unsupported init values */
|
|
|
|
|
if (init_val & ~PKEY_ACCESS_MASK)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
2020-06-09 07:33:25 +03:00
|
|
|
mmap_write_lock(current->mm);
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
pkey = mm_pkey_alloc(current->mm);
|
|
|
|
|
|
|
|
|
|
ret = -ENOSPC;
|
|
|
|
|
if (pkey == -1)
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
ret = arch_set_user_pkey_access(current, pkey, init_val);
|
|
|
|
|
if (ret) {
|
|
|
|
|
mm_pkey_free(current->mm, pkey);
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
ret = pkey;
|
|
|
|
|
out:
|
2020-06-09 07:33:25 +03:00
|
|
|
mmap_write_unlock(current->mm);
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
SYSCALL_DEFINE1(pkey_free, int, pkey)
|
|
|
|
|
{
|
|
|
|
|
int ret;
|
|
|
|
|
|
2020-06-09 07:33:25 +03:00
|
|
|
mmap_write_lock(current->mm);
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
ret = mm_pkey_free(current->mm, pkey);
|
2020-06-09 07:33:25 +03:00
|
|
|
mmap_write_unlock(current->mm);
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
|
|
|
|
|
/*
|
2021-05-07 04:06:47 +03:00
|
|
|
* We could provide warnings or errors if any VMA still
|
x86/pkeys: Allocation/free syscalls
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-29 19:30:15 +03:00
|
|
|
* has the pkey set here.
|
|
|
|
|
*/
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
2016-12-13 03:43:09 +03:00
|
|
|
|
|
|
|
|
#endif /* CONFIG_ARCH_HAS_PKEYS */
|
