2019-05-27 09:55:21 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
2010-02-03 01:40:49 +03:00
|
|
|
/*
|
|
|
|
* saa7706.c Philips SAA7706H Car Radio DSP driver
|
|
|
|
* Copyright (c) 2009 Intel Corporation
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/i2c.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
|
|
|
#include <linux/slab.h>
|
2010-02-03 01:40:49 +03:00
|
|
|
#include <media/v4l2-device.h>
|
2013-06-10 11:50:11 +04:00
|
|
|
#include <media/v4l2-ctrls.h>
|
2010-02-03 01:40:49 +03:00
|
|
|
|
|
|
|
#define DRIVER_NAME "saa7706h"
|
|
|
|
|
|
|
|
/* the I2C memory map looks like this
|
|
|
|
|
|
|
|
$1C00 - $FFFF Not Used
|
|
|
|
$2200 - $3FFF Reserved YRAM (DSP2) space
|
|
|
|
$2000 - $21FF YRAM (DSP2)
|
|
|
|
$1FF0 - $1FFF Hardware Registers
|
|
|
|
$1280 - $1FEF Reserved XRAM (DSP2) space
|
|
|
|
$1000 - $127F XRAM (DSP2)
|
|
|
|
$0FFF DSP CONTROL
|
|
|
|
$0A00 - $0FFE Reserved
|
|
|
|
$0980 - $09FF Reserved YRAM (DSP1) space
|
|
|
|
$0800 - $097F YRAM (DSP1)
|
|
|
|
$0200 - $07FF Not Used
|
|
|
|
$0180 - $01FF Reserved XRAM (DSP1) space
|
|
|
|
$0000 - $017F XRAM (DSP1)
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define SAA7706H_REG_CTRL 0x0fff
|
|
|
|
#define SAA7706H_CTRL_BYP_PLL 0x0001
|
|
|
|
#define SAA7706H_CTRL_PLL_DIV_MASK 0x003e
|
|
|
|
#define SAA7706H_CTRL_PLL3_62975MHZ 0x003e
|
|
|
|
#define SAA7706H_CTRL_DSP_TURBO 0x0040
|
|
|
|
#define SAA7706H_CTRL_PC_RESET_DSP1 0x0080
|
|
|
|
#define SAA7706H_CTRL_PC_RESET_DSP2 0x0100
|
|
|
|
#define SAA7706H_CTRL_DSP1_ROM_EN_MASK 0x0600
|
|
|
|
#define SAA7706H_CTRL_DSP1_FUNC_PROM 0x0000
|
|
|
|
#define SAA7706H_CTRL_DSP2_ROM_EN_MASK 0x1800
|
|
|
|
#define SAA7706H_CTRL_DSP2_FUNC_PROM 0x0000
|
|
|
|
#define SAA7706H_CTRL_DIG_SIL_INTERPOL 0x8000
|
|
|
|
|
|
|
|
#define SAA7706H_REG_EVALUATION 0x1ff0
|
|
|
|
#define SAA7706H_EVAL_DISABLE_CHARGE_PUMP 0x000001
|
|
|
|
#define SAA7706H_EVAL_DCS_CLOCK 0x000002
|
|
|
|
#define SAA7706H_EVAL_GNDRC1_ENABLE 0x000004
|
|
|
|
#define SAA7706H_EVAL_GNDRC2_ENABLE 0x000008
|
|
|
|
|
|
|
|
#define SAA7706H_REG_CL_GEN1 0x1ff3
|
|
|
|
#define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK 0x00000f
|
|
|
|
#define SAA7706H_CL_GEN1_LOOPGAIN_MASK 0x0000f0
|
|
|
|
#define SAA7706H_CL_GEN1_COARSE_RATION 0xffff00
|
|
|
|
|
|
|
|
#define SAA7706H_REG_CL_GEN2 0x1ff4
|
|
|
|
#define SAA7706H_CL_GEN2_WSEDGE_FALLING 0x000001
|
|
|
|
#define SAA7706H_CL_GEN2_STOP_VCO 0x000002
|
|
|
|
#define SAA7706H_CL_GEN2_FRERUN 0x000004
|
|
|
|
#define SAA7706H_CL_GEN2_ADAPTIVE 0x000008
|
|
|
|
#define SAA7706H_CL_GEN2_FINE_RATIO_MASK 0x0ffff0
|
|
|
|
|
|
|
|
#define SAA7706H_REG_CL_GEN4 0x1ff6
|
|
|
|
#define SAA7706H_CL_GEN4_BYPASS_PLL1 0x001000
|
|
|
|
#define SAA7706H_CL_GEN4_PLL1_DIV_MASK 0x03e000
|
|
|
|
#define SAA7706H_CL_GEN4_DSP1_TURBO 0x040000
|
|
|
|
|
|
|
|
#define SAA7706H_REG_SEL 0x1ff7
|
|
|
|
#define SAA7706H_SEL_DSP2_SRCA_MASK 0x000007
|
|
|
|
#define SAA7706H_SEL_DSP2_FMTA_MASK 0x000031
|
|
|
|
#define SAA7706H_SEL_DSP2_SRCB_MASK 0x0001c0
|
|
|
|
#define SAA7706H_SEL_DSP2_FMTB_MASK 0x000e00
|
|
|
|
#define SAA7706H_SEL_DSP1_SRC_MASK 0x003000
|
|
|
|
#define SAA7706H_SEL_DSP1_FMT_MASK 0x01c003
|
|
|
|
#define SAA7706H_SEL_SPDIF2 0x020000
|
|
|
|
#define SAA7706H_SEL_HOST_IO_FMT_MASK 0x1c0000
|
|
|
|
#define SAA7706H_SEL_EN_HOST_IO 0x200000
|
|
|
|
|
|
|
|
#define SAA7706H_REG_IAC 0x1ff8
|
|
|
|
#define SAA7706H_REG_CLK_SET 0x1ff9
|
|
|
|
#define SAA7706H_REG_CLK_COEFF 0x1ffa
|
|
|
|
#define SAA7706H_REG_INPUT_SENS 0x1ffb
|
|
|
|
#define SAA7706H_INPUT_SENS_RDS_VOL_MASK 0x0003f
|
|
|
|
#define SAA7706H_INPUT_SENS_FM_VOL_MASK 0x00fc0
|
|
|
|
#define SAA7706H_INPUT_SENS_FM_MPX 0x01000
|
|
|
|
#define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN 0x02000
|
|
|
|
#define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN 0x04000
|
|
|
|
#define SAA7706H_REG_PHONE_NAV_AUDIO 0x1ffc
|
|
|
|
#define SAA7706H_REG_IO_CONF_DSP2 0x1ffd
|
|
|
|
#define SAA7706H_REG_STATUS_DSP2 0x1ffe
|
|
|
|
#define SAA7706H_REG_PC_DSP2 0x1fff
|
|
|
|
|
|
|
|
#define SAA7706H_DSP1_MOD0 0x0800
|
|
|
|
#define SAA7706H_DSP1_ROM_VER 0x097f
|
|
|
|
#define SAA7706H_DSP2_MPTR0 0x1000
|
|
|
|
|
|
|
|
#define SAA7706H_DSP1_MODPNTR 0x0000
|
|
|
|
|
|
|
|
#define SAA7706H_DSP2_XMEM_CONTLLCW 0x113e
|
|
|
|
#define SAA7706H_DSP2_XMEM_BUSAMP 0x114a
|
|
|
|
#define SAA7706H_DSP2_XMEM_FDACPNTR 0x11f9
|
|
|
|
#define SAA7706H_DSP2_XMEM_IIS1PNTR 0x11fb
|
|
|
|
|
|
|
|
#define SAA7706H_DSP2_YMEM_PVGA 0x212a
|
|
|
|
#define SAA7706H_DSP2_YMEM_PVAT1 0x212b
|
|
|
|
#define SAA7706H_DSP2_YMEM_PVAT 0x212c
|
|
|
|
#define SAA7706H_DSP2_YMEM_ROM_VER 0x21ff
|
|
|
|
|
|
|
|
#define SUPPORTED_DSP1_ROM_VER 0x667
|
|
|
|
|
|
|
|
struct saa7706h_state {
|
|
|
|
struct v4l2_subdev sd;
|
2013-06-10 11:50:11 +04:00
|
|
|
struct v4l2_ctrl_handler hdl;
|
2010-02-03 01:40:49 +03:00
|
|
|
unsigned muted;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd)
|
|
|
|
{
|
|
|
|
return container_of(sd, struct saa7706h_state, sd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len)
|
|
|
|
{
|
|
|
|
int err = i2c_master_send(client, data, len);
|
|
|
|
if (err == len)
|
|
|
|
return 0;
|
|
|
|
return err > 0 ? -EIO : err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_i2c_transfer(struct i2c_client *client,
|
|
|
|
struct i2c_msg *msgs, int num)
|
|
|
|
{
|
|
|
|
int err = i2c_transfer(client->adapter, msgs, num);
|
|
|
|
if (err == num)
|
|
|
|
return 0;
|
|
|
|
return err > 0 ? -EIO : err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
u8 buf[5];
|
|
|
|
int pos = 0;
|
|
|
|
|
|
|
|
buf[pos++] = reg >> 8;
|
|
|
|
buf[pos++] = reg;
|
|
|
|
buf[pos++] = val >> 16;
|
|
|
|
buf[pos++] = val >> 8;
|
|
|
|
buf[pos++] = val;
|
|
|
|
|
|
|
|
return saa7706h_i2c_send(client, buf, pos);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val,
|
|
|
|
int *err)
|
|
|
|
{
|
|
|
|
return *err ? *err : saa7706h_set_reg24(sd, reg, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
u8 buf[4];
|
|
|
|
int pos = 0;
|
|
|
|
|
|
|
|
buf[pos++] = reg >> 8;
|
|
|
|
buf[pos++] = reg;
|
|
|
|
buf[pos++] = val >> 8;
|
|
|
|
buf[pos++] = val;
|
|
|
|
|
|
|
|
return saa7706h_i2c_send(client, buf, pos);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val,
|
|
|
|
int *err)
|
|
|
|
{
|
|
|
|
return *err ? *err : saa7706h_set_reg16(sd, reg, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
u8 buf[2];
|
|
|
|
int err;
|
|
|
|
u8 regaddr[] = {reg >> 8, reg};
|
2012-09-18 15:22:35 +04:00
|
|
|
struct i2c_msg msg[] = {
|
|
|
|
{
|
|
|
|
.addr = client->addr,
|
|
|
|
.len = sizeof(regaddr),
|
|
|
|
.buf = regaddr
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.addr = client->addr,
|
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.len = sizeof(buf),
|
|
|
|
.buf = buf
|
|
|
|
}
|
|
|
|
};
|
2010-02-03 01:40:49 +03:00
|
|
|
|
|
|
|
err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg));
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
return buf[0] << 8 | buf[1];
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_unmute(struct v4l2_subdev *sd)
|
|
|
|
{
|
|
|
|
struct saa7706h_state *state = to_state(sd);
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
|
|
|
|
SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
|
|
|
|
SAA7706H_CTRL_PC_RESET_DSP2, &err);
|
|
|
|
|
|
|
|
/* newer versions of the chip requires a small sleep after reset */
|
|
|
|
msleep(1);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL,
|
|
|
|
SAA7706H_CTRL_PLL3_62975MHZ, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2,
|
|
|
|
SAA7706H_CL_GEN2_WSEDGE_FALLING, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO,
|
|
|
|
0x0e22ff, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800,
|
|
|
|
&err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err);
|
|
|
|
|
|
|
|
err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905,
|
|
|
|
&err);
|
|
|
|
if (!err)
|
|
|
|
state->muted = 0;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int saa7706h_mute(struct v4l2_subdev *sd)
|
|
|
|
{
|
|
|
|
struct saa7706h_state *state = to_state(sd);
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL,
|
|
|
|
SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 |
|
|
|
|
SAA7706H_CTRL_PC_RESET_DSP2);
|
|
|
|
if (!err)
|
|
|
|
state->muted = 1;
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2013-06-10 11:50:11 +04:00
|
|
|
static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl)
|
2010-02-03 01:40:49 +03:00
|
|
|
{
|
2013-06-10 11:50:11 +04:00
|
|
|
struct saa7706h_state *state =
|
|
|
|
container_of(ctrl->handler, struct saa7706h_state, hdl);
|
2010-02-03 01:40:49 +03:00
|
|
|
|
|
|
|
switch (ctrl->id) {
|
|
|
|
case V4L2_CID_AUDIO_MUTE:
|
2013-06-10 11:50:11 +04:00
|
|
|
if (ctrl->val)
|
|
|
|
return saa7706h_mute(&state->sd);
|
|
|
|
return saa7706h_unmute(&state->sd);
|
2010-02-03 01:40:49 +03:00
|
|
|
}
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2013-06-10 11:50:11 +04:00
|
|
|
static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = {
|
|
|
|
.s_ctrl = saa7706h_s_ctrl,
|
|
|
|
};
|
2010-02-03 01:40:49 +03:00
|
|
|
|
2015-06-12 19:31:18 +03:00
|
|
|
static const struct v4l2_subdev_ops empty_ops = {};
|
2010-02-03 01:40:49 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Generic i2c probe
|
|
|
|
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
|
|
|
|
*/
|
|
|
|
|
2012-12-22 01:17:53 +04:00
|
|
|
static int saa7706h_probe(struct i2c_client *client,
|
|
|
|
const struct i2c_device_id *id)
|
2010-02-03 01:40:49 +03:00
|
|
|
{
|
|
|
|
struct saa7706h_state *state;
|
|
|
|
struct v4l2_subdev *sd;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
v4l_info(client, "chip found @ 0x%02x (%s)\n",
|
|
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
|
2011-04-01 21:12:02 +04:00
|
|
|
state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL);
|
2010-02-03 01:40:49 +03:00
|
|
|
if (state == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
sd = &state->sd;
|
2015-06-12 19:31:18 +03:00
|
|
|
v4l2_i2c_subdev_init(sd, client, &empty_ops);
|
2010-02-03 01:40:49 +03:00
|
|
|
|
2013-06-10 11:50:11 +04:00
|
|
|
v4l2_ctrl_handler_init(&state->hdl, 4);
|
|
|
|
v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops,
|
|
|
|
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
|
|
|
|
sd->ctrl_handler = &state->hdl;
|
|
|
|
err = state->hdl.error;
|
|
|
|
if (err)
|
|
|
|
goto err;
|
|
|
|
|
2010-02-03 01:40:49 +03:00
|
|
|
/* check the rom versions */
|
|
|
|
err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
|
|
|
|
if (err < 0)
|
|
|
|
goto err;
|
|
|
|
if (err != SUPPORTED_DSP1_ROM_VER)
|
|
|
|
v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
|
|
|
|
state->muted = 1;
|
|
|
|
|
|
|
|
/* startup in a muted state */
|
|
|
|
err = saa7706h_mute(sd);
|
|
|
|
if (err)
|
|
|
|
goto err;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err:
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
2013-06-10 11:50:11 +04:00
|
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
2010-02-03 01:40:49 +03:00
|
|
|
kfree(to_state(sd));
|
|
|
|
|
|
|
|
printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2012-12-22 01:17:53 +04:00
|
|
|
static int saa7706h_remove(struct i2c_client *client)
|
2010-02-03 01:40:49 +03:00
|
|
|
{
|
|
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
2013-06-10 11:50:11 +04:00
|
|
|
struct saa7706h_state *state = to_state(sd);
|
2010-02-03 01:40:49 +03:00
|
|
|
|
|
|
|
saa7706h_mute(sd);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
2013-06-10 11:50:11 +04:00
|
|
|
v4l2_ctrl_handler_free(&state->hdl);
|
2010-02-03 01:40:49 +03:00
|
|
|
kfree(to_state(sd));
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct i2c_device_id saa7706h_id[] = {
|
|
|
|
{DRIVER_NAME, 0},
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(i2c, saa7706h_id);
|
|
|
|
|
|
|
|
static struct i2c_driver saa7706h_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = DRIVER_NAME,
|
|
|
|
},
|
|
|
|
.probe = saa7706h_probe,
|
2012-12-22 01:17:53 +04:00
|
|
|
.remove = saa7706h_remove,
|
2010-02-03 01:40:49 +03:00
|
|
|
.id_table = saa7706h_id,
|
|
|
|
};
|
|
|
|
|
2012-02-12 13:56:32 +04:00
|
|
|
module_i2c_driver(saa7706h_driver);
|
2010-02-03 01:40:49 +03:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver");
|
|
|
|
MODULE_AUTHOR("Mocean Laboratories");
|
|
|
|
MODULE_LICENSE("GPL v2");
|