microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/pinctrl/mvebu/pinctrl-armada-cp110.c

694 строки
23 KiB
C
Исходник Обычный вид История

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 09:55:01 +03:00
// SPDX-License-Identifier: GPL-2.0-or-later
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
/*
* Marvell Armada CP110 pinctrl driver based on mvebu pinctrl core
*
* Copyright (C) 2017 Marvell
*
* Hanna Hawa <hannah@marvell.com>
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/platform_device.h>
#include "pinctrl-mvebu.h"
/*
* Even if the pin controller is the same the MMP available depend on the SoC
* integration.
* - In Armada7K (single CP) almost all the MPPs are available (except the
* MMP 39 to 43)
* - In Armada8K (dual CP) the MPPs are split into 2 parts, MPPs 0-31 from
* CPS, and MPPs 32-62 from CPM, the below flags (V_ARMADA_8K_CPM,
* V_ARMADA_8K_CPS) set which MPP is available to the CPx.
* The x_PLUS enum mean that the MPP available for CPx and for Armada70x0
*/
enum {
V_ARMADA_7K = BIT(0),
V_ARMADA_8K_CPM = BIT(1),
V_ARMADA_8K_CPS = BIT(2),
pinctrl: mvebu: add additional variant for standalone CP115 With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:07 +03:00
V_CP115_STANDALONE = BIT(3),
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
V_ARMADA_7K_8K_CPM = (V_ARMADA_7K | V_ARMADA_8K_CPM),
V_ARMADA_7K_8K_CPS = (V_ARMADA_7K | V_ARMADA_8K_CPS),
};
static struct mvebu_mpp_mode armada_cp110_mpp_modes[] = {
MPP_MODE(0,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ale1"),
MPP_FUNCTION(2, "au", "i2smclk"),
MPP_FUNCTION(3, "ge0", "rxd3"),
MPP_FUNCTION(4, "tdm", "pclk"),
MPP_FUNCTION(6, "ptp", "pulse"),
MPP_FUNCTION(7, "mss_i2c", "sda"),
MPP_FUNCTION(8, "uart0", "rxd"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(10, "ge", "mdio")),
MPP_MODE(1,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ale0"),
MPP_FUNCTION(2, "au", "i2sdo_spdifo"),
MPP_FUNCTION(3, "ge0", "rxd2"),
MPP_FUNCTION(4, "tdm", "drx"),
MPP_FUNCTION(6, "ptp", "clk"),
MPP_FUNCTION(7, "mss_i2c", "sck"),
MPP_FUNCTION(8, "uart0", "txd"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "ge", "mdc")),
MPP_MODE(2,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad15"),
MPP_FUNCTION(2, "au", "i2sextclk"),
MPP_FUNCTION(3, "ge0", "rxd1"),
MPP_FUNCTION(4, "tdm", "dtx"),
MPP_FUNCTION(5, "mss_uart", "rxd"),
MPP_FUNCTION(6, "ptp", "pclk_out"),
MPP_FUNCTION(7, "i2c1", "sck"),
MPP_FUNCTION(8, "uart1", "rxd"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(10, "xg", "mdc")),
MPP_MODE(3,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad14"),
MPP_FUNCTION(2, "au", "i2slrclk"),
MPP_FUNCTION(3, "ge0", "rxd0"),
MPP_FUNCTION(4, "tdm", "fsync"),
MPP_FUNCTION(5, "mss_uart", "txd"),
MPP_FUNCTION(6, "pcie", "rstoutn"),
MPP_FUNCTION(7, "i2c1", "sda"),
MPP_FUNCTION(8, "uart1", "txd"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "xg", "mdio")),
MPP_MODE(4,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad13"),
MPP_FUNCTION(2, "au", "i2sbclk"),
MPP_FUNCTION(3, "ge0", "rxctl"),
MPP_FUNCTION(4, "tdm", "rstn"),
MPP_FUNCTION(5, "mss_uart", "rxd"),
MPP_FUNCTION(6, "uart1", "cts"),
MPP_FUNCTION(7, "pcie0", "clkreq"),
MPP_FUNCTION(8, "uart3", "rxd"),
MPP_FUNCTION(10, "ge", "mdc")),
MPP_MODE(5,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad12"),
MPP_FUNCTION(2, "au", "i2sdi"),
MPP_FUNCTION(3, "ge0", "rxclk"),
MPP_FUNCTION(4, "tdm", "intn"),
MPP_FUNCTION(5, "mss_uart", "txd"),
MPP_FUNCTION(6, "uart1", "rts"),
MPP_FUNCTION(7, "pcie1", "clkreq"),
MPP_FUNCTION(8, "uart3", "txd"),
MPP_FUNCTION(10, "ge", "mdio")),
MPP_MODE(6,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad11"),
MPP_FUNCTION(3, "ge0", "txd3"),
MPP_FUNCTION(4, "spi0", "csn2"),
MPP_FUNCTION(5, "au", "i2sextclk"),
MPP_FUNCTION(6, "sata1", "present_act"),
MPP_FUNCTION(7, "pcie2", "clkreq"),
MPP_FUNCTION(8, "uart0", "rxd"),
MPP_FUNCTION(9, "ptp", "pulse")),
MPP_MODE(7,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad10"),
MPP_FUNCTION(3, "ge0", "txd2"),
MPP_FUNCTION(4, "spi0", "csn1"),
MPP_FUNCTION(5, "spi1", "csn1"),
MPP_FUNCTION(6, "sata0", "present_act"),
MPP_FUNCTION(7, "led", "data"),
MPP_FUNCTION(8, "uart0", "txd"),
MPP_FUNCTION(9, "ptp", "clk")),
MPP_MODE(8,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad9"),
MPP_FUNCTION(3, "ge0", "txd1"),
MPP_FUNCTION(4, "spi0", "csn0"),
MPP_FUNCTION(5, "spi1", "csn0"),
MPP_FUNCTION(6, "uart0", "cts"),
MPP_FUNCTION(7, "led", "stb"),
MPP_FUNCTION(8, "uart2", "rxd"),
MPP_FUNCTION(9, "ptp", "pclk_out"),
MPP_FUNCTION(10, "synce1", "clk")),
MPP_MODE(9,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad8"),
MPP_FUNCTION(3, "ge0", "txd0"),
MPP_FUNCTION(4, "spi0", "mosi"),
MPP_FUNCTION(5, "spi1", "mosi"),
MPP_FUNCTION(7, "pcie", "rstoutn"),
MPP_FUNCTION(10, "synce2", "clk")),
MPP_MODE(10,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "readyn"),
MPP_FUNCTION(3, "ge0", "txctl"),
MPP_FUNCTION(4, "spi0", "miso"),
MPP_FUNCTION(5, "spi1", "miso"),
MPP_FUNCTION(6, "uart0", "cts"),
MPP_FUNCTION(7, "sata1", "present_act")),
MPP_MODE(11,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "wen1"),
MPP_FUNCTION(3, "ge0", "txclkout"),
MPP_FUNCTION(4, "spi0", "clk"),
MPP_FUNCTION(5, "spi1", "clk"),
MPP_FUNCTION(6, "uart0", "rts"),
MPP_FUNCTION(7, "led", "clk"),
MPP_FUNCTION(8, "uart2", "txd"),
MPP_FUNCTION(9, "sata0", "present_act")),
MPP_MODE(12,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "clk_out"),
MPP_FUNCTION(2, "nf", "rbn1"),
MPP_FUNCTION(3, "spi1", "csn1"),
MPP_FUNCTION(4, "ge0", "rxclk")),
MPP_MODE(13,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "burstn"),
MPP_FUNCTION(2, "nf", "rbn0"),
MPP_FUNCTION(3, "spi1", "miso"),
MPP_FUNCTION(4, "ge0", "rxctl"),
MPP_FUNCTION(8, "mss_spi", "miso")),
MPP_MODE(14,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "bootcsn"),
MPP_FUNCTION(2, "dev", "csn0"),
MPP_FUNCTION(3, "spi1", "csn0"),
MPP_FUNCTION(4, "spi0", "csn3"),
MPP_FUNCTION(5, "au", "i2sextclk"),
MPP_FUNCTION(6, "spi0", "miso"),
MPP_FUNCTION(7, "sata0", "present_act"),
MPP_FUNCTION(8, "mss_spi", "csn")),
MPP_MODE(15,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad7"),
MPP_FUNCTION(3, "spi1", "mosi"),
MPP_FUNCTION(6, "spi0", "mosi"),
MPP_FUNCTION(8, "mss_spi", "mosi"),
MPP_FUNCTION(11, "ptp", "pulse_cp2cp")),
MPP_MODE(16,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad6"),
MPP_FUNCTION(3, "spi1", "clk"),
MPP_FUNCTION(8, "mss_spi", "clk")),
MPP_MODE(17,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad5"),
MPP_FUNCTION(4, "ge0", "txd3")),
MPP_MODE(18,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad4"),
MPP_FUNCTION(4, "ge0", "txd2"),
MPP_FUNCTION(11, "ptp", "clk_cp2cp")),
MPP_MODE(19,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad3"),
MPP_FUNCTION(4, "ge0", "txd1"),
MPP_FUNCTION(11, "wakeup", "out_cp2cp")),
MPP_MODE(20,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad2"),
MPP_FUNCTION(4, "ge0", "txd0")),
MPP_MODE(21,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad1"),
MPP_FUNCTION(4, "ge0", "txctl"),
MPP_FUNCTION(11, "sei", "in_cp2cp")),
MPP_MODE(22,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "ad0"),
MPP_FUNCTION(4, "ge0", "txclkout"),
MPP_FUNCTION(11, "wakeup", "in_cp2cp")),
MPP_MODE(23,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "a1"),
MPP_FUNCTION(5, "au", "i2smclk"),
MPP_FUNCTION(11, "link", "rd_in_cp2cp")),
MPP_MODE(24,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "a0"),
MPP_FUNCTION(5, "au", "i2slrclk")),
MPP_MODE(25,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "oen"),
MPP_FUNCTION(5, "au", "i2sdo_spdifo")),
MPP_MODE(26,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "wen0"),
MPP_FUNCTION(5, "au", "i2sbclk")),
MPP_MODE(27,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "csn0"),
MPP_FUNCTION(2, "spi1", "miso"),
MPP_FUNCTION(3, "mss_gpio4", NULL),
MPP_FUNCTION(4, "ge0", "rxd3"),
MPP_FUNCTION(5, "spi0", "csn4"),
MPP_FUNCTION(8, "ge", "mdio"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(10, "uart0", "rts"),
MPP_FUNCTION(11, "rei", "in_cp2cp")),
MPP_MODE(28,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "csn1"),
MPP_FUNCTION(2, "spi1", "csn0"),
MPP_FUNCTION(3, "mss_gpio5", NULL),
MPP_FUNCTION(4, "ge0", "rxd2"),
MPP_FUNCTION(5, "spi0", "csn5"),
MPP_FUNCTION(6, "pcie2", "clkreq"),
MPP_FUNCTION(7, "ptp", "pulse"),
MPP_FUNCTION(8, "ge", "mdc"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "uart0", "cts"),
MPP_FUNCTION(11, "led", "data")),
MPP_MODE(29,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "csn2"),
MPP_FUNCTION(2, "spi1", "mosi"),
MPP_FUNCTION(3, "mss_gpio6", NULL),
MPP_FUNCTION(4, "ge0", "rxd1"),
MPP_FUNCTION(5, "spi0", "csn6"),
MPP_FUNCTION(6, "pcie1", "clkreq"),
MPP_FUNCTION(7, "ptp", "clk"),
MPP_FUNCTION(8, "mss_i2c", "sda"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(10, "uart0", "rxd"),
MPP_FUNCTION(11, "led", "stb")),
MPP_MODE(30,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "csn3"),
MPP_FUNCTION(2, "spi1", "clk"),
MPP_FUNCTION(3, "mss_gpio7", NULL),
MPP_FUNCTION(4, "ge0", "rxd0"),
MPP_FUNCTION(5, "spi0", "csn7"),
MPP_FUNCTION(6, "pcie0", "clkreq"),
MPP_FUNCTION(7, "ptp", "pclk_out"),
MPP_FUNCTION(8, "mss_i2c", "sck"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "uart0", "txd"),
MPP_FUNCTION(11, "led", "clk")),
MPP_MODE(31,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "dev", "a2"),
MPP_FUNCTION(3, "mss_gpio4", NULL),
MPP_FUNCTION(6, "pcie", "rstoutn"),
MPP_FUNCTION(8, "ge", "mdc")),
MPP_MODE(32,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mii", "col"),
MPP_FUNCTION(2, "mii", "txerr"),
MPP_FUNCTION(3, "mss_spi", "miso"),
MPP_FUNCTION(4, "tdm", "drx"),
MPP_FUNCTION(5, "au", "i2sextclk"),
MPP_FUNCTION(6, "au", "i2sdi"),
MPP_FUNCTION(7, "ge", "mdio"),
MPP_FUNCTION(8, "sdio", "v18_en"),
MPP_FUNCTION(9, "pcie1", "clkreq"),
MPP_FUNCTION(10, "mss_gpio0", NULL)),
MPP_MODE(33,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mii", "txclk"),
MPP_FUNCTION(2, "sdio", "pwr10"),
MPP_FUNCTION(3, "mss_spi", "csn"),
MPP_FUNCTION(4, "tdm", "fsync"),
MPP_FUNCTION(5, "au", "i2smclk"),
MPP_FUNCTION(6, "sdio", "bus_pwr"),
MPP_FUNCTION(8, "xg", "mdio"),
MPP_FUNCTION(9, "pcie2", "clkreq"),
MPP_FUNCTION(10, "mss_gpio1", NULL)),
MPP_MODE(34,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mii", "rxerr"),
MPP_FUNCTION(2, "sdio", "pwr11"),
MPP_FUNCTION(3, "mss_spi", "mosi"),
MPP_FUNCTION(4, "tdm", "dtx"),
MPP_FUNCTION(5, "au", "i2slrclk"),
MPP_FUNCTION(6, "sdio", "wr_protect"),
MPP_FUNCTION(7, "ge", "mdc"),
MPP_FUNCTION(9, "pcie0", "clkreq"),
MPP_FUNCTION(10, "mss_gpio2", NULL)),
MPP_MODE(35,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "sata1", "present_act"),
MPP_FUNCTION(2, "i2c1", "sda"),
MPP_FUNCTION(3, "mss_spi", "clk"),
MPP_FUNCTION(4, "tdm", "pclk"),
MPP_FUNCTION(5, "au", "i2sdo_spdifo"),
MPP_FUNCTION(6, "sdio", "card_detect"),
MPP_FUNCTION(7, "xg", "mdio"),
MPP_FUNCTION(8, "ge", "mdio"),
MPP_FUNCTION(9, "pcie", "rstoutn"),
MPP_FUNCTION(10, "mss_gpio3", NULL)),
MPP_MODE(36,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "synce2", "clk"),
MPP_FUNCTION(2, "i2c1", "sck"),
MPP_FUNCTION(3, "ptp", "clk"),
MPP_FUNCTION(4, "synce1", "clk"),
MPP_FUNCTION(5, "au", "i2sbclk"),
MPP_FUNCTION(6, "sata0", "present_act"),
MPP_FUNCTION(7, "xg", "mdc"),
MPP_FUNCTION(8, "ge", "mdc"),
MPP_FUNCTION(9, "pcie2", "clkreq"),
MPP_FUNCTION(10, "mss_gpio5", NULL)),
MPP_MODE(37,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "uart2", "rxd"),
MPP_FUNCTION(2, "i2c0", "sck"),
MPP_FUNCTION(3, "ptp", "pclk_out"),
MPP_FUNCTION(4, "tdm", "intn"),
MPP_FUNCTION(5, "mss_i2c", "sck"),
MPP_FUNCTION(6, "sata1", "present_act"),
MPP_FUNCTION(7, "ge", "mdc"),
MPP_FUNCTION(8, "xg", "mdc"),
MPP_FUNCTION(9, "pcie1", "clkreq"),
MPP_FUNCTION(10, "mss_gpio6", NULL),
MPP_FUNCTION(11, "link", "rd_out_cp2cp")),
MPP_MODE(38,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "uart2", "txd"),
MPP_FUNCTION(2, "i2c0", "sda"),
MPP_FUNCTION(3, "ptp", "pulse"),
MPP_FUNCTION(4, "tdm", "rstn"),
MPP_FUNCTION(5, "mss_i2c", "sda"),
MPP_FUNCTION(6, "sata0", "present_act"),
MPP_FUNCTION(7, "ge", "mdio"),
MPP_FUNCTION(8, "xg", "mdio"),
MPP_FUNCTION(9, "au", "i2sextclk"),
MPP_FUNCTION(10, "mss_gpio7", NULL),
MPP_FUNCTION(11, "ptp", "pulse_cp2cp")),
MPP_MODE(39,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "sdio", "wr_protect"),
MPP_FUNCTION(4, "au", "i2sbclk"),
MPP_FUNCTION(5, "ptp", "clk"),
MPP_FUNCTION(6, "spi0", "csn1"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "mss_gpio0", NULL)),
MPP_MODE(40,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "sdio", "pwr11"),
MPP_FUNCTION(2, "synce1", "clk"),
MPP_FUNCTION(3, "mss_i2c", "sda"),
MPP_FUNCTION(4, "au", "i2sdo_spdifo"),
MPP_FUNCTION(5, "ptp", "pclk_out"),
MPP_FUNCTION(6, "spi0", "clk"),
MPP_FUNCTION(7, "uart1", "txd"),
MPP_FUNCTION(8, "ge", "mdio"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(10, "mss_gpio1", NULL)),
MPP_MODE(41,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "sdio", "pwr10"),
MPP_FUNCTION(2, "sdio", "bus_pwr"),
MPP_FUNCTION(3, "mss_i2c", "sck"),
MPP_FUNCTION(4, "au", "i2slrclk"),
MPP_FUNCTION(5, "ptp", "pulse"),
MPP_FUNCTION(6, "spi0", "mosi"),
MPP_FUNCTION(7, "uart1", "rxd"),
MPP_FUNCTION(8, "ge", "mdc"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "mss_gpio2", NULL),
MPP_FUNCTION(11, "rei", "out_cp2cp")),
MPP_MODE(42,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "sdio", "v18_en"),
MPP_FUNCTION(2, "sdio", "wr_protect"),
MPP_FUNCTION(3, "synce2", "clk"),
MPP_FUNCTION(4, "au", "i2smclk"),
MPP_FUNCTION(5, "mss_uart", "txd"),
MPP_FUNCTION(6, "spi0", "miso"),
MPP_FUNCTION(7, "uart1", "cts"),
MPP_FUNCTION(8, "xg", "mdc"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(10, "mss_gpio4", NULL)),
MPP_MODE(43,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "sdio", "card_detect"),
MPP_FUNCTION(3, "synce1", "clk"),
MPP_FUNCTION(4, "au", "i2sextclk"),
MPP_FUNCTION(5, "mss_uart", "rxd"),
MPP_FUNCTION(6, "spi0", "csn0"),
MPP_FUNCTION(7, "uart1", "rts"),
MPP_FUNCTION(8, "xg", "mdio"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "mss_gpio5", NULL),
MPP_FUNCTION(11, "wakeup", "out_cp2cp")),
MPP_MODE(44,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "txd2"),
MPP_FUNCTION(7, "uart0", "rts"),
MPP_FUNCTION(11, "ptp", "clk_cp2cp")),
MPP_MODE(45,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "txd3"),
MPP_FUNCTION(7, "uart0", "txd"),
MPP_FUNCTION(9, "pcie", "rstoutn")),
MPP_MODE(46,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "txd1"),
MPP_FUNCTION(7, "uart1", "rts")),
MPP_MODE(47,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "txd0"),
MPP_FUNCTION(5, "spi1", "clk"),
MPP_FUNCTION(7, "uart1", "txd"),
MPP_FUNCTION(8, "ge", "mdc")),
MPP_MODE(48,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "txctl_txen"),
MPP_FUNCTION(5, "spi1", "mosi"),
MPP_FUNCTION(8, "xg", "mdc"),
MPP_FUNCTION(11, "wakeup", "in_cp2cp")),
MPP_MODE(49,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "txclkout"),
MPP_FUNCTION(2, "mii", "crs"),
MPP_FUNCTION(5, "spi1", "miso"),
MPP_FUNCTION(7, "uart1", "rxd"),
MPP_FUNCTION(8, "ge", "mdio"),
MPP_FUNCTION(9, "pcie0", "clkreq"),
MPP_FUNCTION(10, "sdio", "v18_en"),
MPP_FUNCTION(11, "sei", "out_cp2cp")),
MPP_MODE(50,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "rxclk"),
MPP_FUNCTION(2, "mss_i2c", "sda"),
MPP_FUNCTION(5, "spi1", "csn0"),
MPP_FUNCTION(6, "uart2", "txd"),
MPP_FUNCTION(7, "uart0", "rxd"),
MPP_FUNCTION(8, "xg", "mdio"),
MPP_FUNCTION(10, "sdio", "pwr11")),
MPP_MODE(51,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "rxd0"),
MPP_FUNCTION(2, "mss_i2c", "sck"),
MPP_FUNCTION(5, "spi1", "csn1"),
MPP_FUNCTION(6, "uart2", "rxd"),
MPP_FUNCTION(7, "uart0", "cts"),
MPP_FUNCTION(10, "sdio", "pwr10")),
MPP_MODE(52,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "rxd1"),
MPP_FUNCTION(2, "synce1", "clk"),
MPP_FUNCTION(4, "synce2", "clk"),
MPP_FUNCTION(5, "spi1", "csn2"),
MPP_FUNCTION(7, "uart1", "cts"),
MPP_FUNCTION(8, "led", "clk"),
MPP_FUNCTION(9, "pcie", "rstoutn"),
MPP_FUNCTION(10, "pcie0", "clkreq")),
MPP_MODE(53,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "rxd2"),
MPP_FUNCTION(3, "ptp", "clk"),
MPP_FUNCTION(5, "spi1", "csn3"),
MPP_FUNCTION(7, "uart1", "rxd"),
MPP_FUNCTION(8, "led", "stb"),
MPP_FUNCTION(11, "sdio", "led")),
MPP_MODE(54,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "rxd3"),
MPP_FUNCTION(2, "synce2", "clk"),
MPP_FUNCTION(3, "ptp", "pclk_out"),
MPP_FUNCTION(4, "synce1", "clk"),
MPP_FUNCTION(8, "led", "data"),
MPP_FUNCTION(10, "sdio", "hw_rst"),
pinctrl: armada-cp110 - fix MPP54/MPP55 functions The function name is used for selecting MPP functionality and should be unique within function names of the same pin. This patch fixes function names for MPP54 and MPP55 that have two different functions named the same. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Link: https://lore.kernel.org/r/20210216113118.17484-3-kostap@marvell.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-16 14:31:18 +03:00
MPP_FUNCTION(11, "sdio_wp", "wr_protect")),
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
MPP_MODE(55,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "ge1", "rxctl_rxdv"),
MPP_FUNCTION(3, "ptp", "pulse"),
MPP_FUNCTION(10, "sdio", "led"),
pinctrl: armada-cp110 - fix MPP54/MPP55 functions The function name is used for selecting MPP functionality and should be unique within function names of the same pin. This patch fixes function names for MPP54 and MPP55 that have two different functions named the same. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Link: https://lore.kernel.org/r/20210216113118.17484-3-kostap@marvell.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-02-16 14:31:18 +03:00
MPP_FUNCTION(11, "sdio_cd", "card_detect")),
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
MPP_MODE(56,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(4, "tdm", "drx"),
MPP_FUNCTION(5, "au", "i2sdo_spdifo"),
MPP_FUNCTION(6, "spi0", "clk"),
MPP_FUNCTION(7, "uart1", "rxd"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(14, "sdio", "clk")),
MPP_MODE(57,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(2, "mss_i2c", "sda"),
MPP_FUNCTION(3, "ptp", "pclk_out"),
MPP_FUNCTION(4, "tdm", "intn"),
MPP_FUNCTION(5, "au", "i2sbclk"),
MPP_FUNCTION(6, "spi0", "mosi"),
MPP_FUNCTION(7, "uart1", "txd"),
MPP_FUNCTION(9, "sata0", "present_act"),
MPP_FUNCTION(14, "sdio", "cmd")),
MPP_MODE(58,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(2, "mss_i2c", "sck"),
MPP_FUNCTION(3, "ptp", "clk"),
MPP_FUNCTION(4, "tdm", "rstn"),
MPP_FUNCTION(5, "au", "i2sdi"),
MPP_FUNCTION(6, "spi0", "miso"),
MPP_FUNCTION(7, "uart1", "cts"),
MPP_FUNCTION(8, "led", "clk"),
MPP_FUNCTION(14, "sdio", "d0")),
MPP_MODE(59,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mss_gpio7", NULL),
MPP_FUNCTION(2, "synce2", "clk"),
MPP_FUNCTION(4, "tdm", "fsync"),
MPP_FUNCTION(5, "au", "i2slrclk"),
MPP_FUNCTION(6, "spi0", "csn0"),
MPP_FUNCTION(7, "uart0", "cts"),
MPP_FUNCTION(8, "led", "stb"),
MPP_FUNCTION(9, "uart1", "txd"),
MPP_FUNCTION(14, "sdio", "d1")),
MPP_MODE(60,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mss_gpio6", NULL),
MPP_FUNCTION(3, "ptp", "pulse"),
MPP_FUNCTION(4, "tdm", "dtx"),
MPP_FUNCTION(5, "au", "i2smclk"),
MPP_FUNCTION(6, "spi0", "csn1"),
MPP_FUNCTION(7, "uart0", "rts"),
MPP_FUNCTION(8, "led", "data"),
MPP_FUNCTION(9, "uart1", "rxd"),
MPP_FUNCTION(14, "sdio", "d2")),
MPP_MODE(61,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mss_gpio5", NULL),
MPP_FUNCTION(3, "ptp", "clk"),
MPP_FUNCTION(4, "tdm", "pclk"),
MPP_FUNCTION(5, "au", "i2sextclk"),
MPP_FUNCTION(6, "spi0", "csn2"),
MPP_FUNCTION(7, "uart0", "txd"),
MPP_FUNCTION(8, "uart2", "txd"),
MPP_FUNCTION(9, "sata1", "present_act"),
MPP_FUNCTION(10, "ge", "mdio"),
MPP_FUNCTION(14, "sdio", "d3")),
MPP_MODE(62,
MPP_FUNCTION(0, "gpio", NULL),
MPP_FUNCTION(1, "mss_gpio4", NULL),
MPP_FUNCTION(2, "synce1", "clk"),
MPP_FUNCTION(3, "ptp", "pclk_out"),
MPP_FUNCTION(5, "sata1", "present_act"),
MPP_FUNCTION(6, "spi0", "csn3"),
MPP_FUNCTION(7, "uart0", "rxd"),
MPP_FUNCTION(8, "uart2", "rxd"),
MPP_FUNCTION(9, "sata0", "present_act"),
pinctrl: mvebu: Add CP110 missing pin functionality Add missing definition for function 0xe on CP-110 MPP-62. The pin function is Data Strobe for SDIO interface. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-2-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:05 +03:00
MPP_FUNCTION(10, "ge", "mdc"),
MPP_FUNCTION(14, "sdio", "ds")),
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
};
static const struct of_device_id armada_cp110_pinctrl_of_match[] = {
{
.compatible = "marvell,armada-7k-pinctrl",
.data = (void *) V_ARMADA_7K,
},
{
.compatible = "marvell,armada-8k-cpm-pinctrl",
.data = (void *) V_ARMADA_8K_CPM,
},
{
.compatible = "marvell,armada-8k-cps-pinctrl",
.data = (void *) V_ARMADA_8K_CPS,
},
pinctrl: mvebu: add additional variant for standalone CP115 With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:07 +03:00
{
.compatible = "marvell,cp115-standalone-pinctrl",
.data = (void *) V_CP115_STANDALONE,
},
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
{ },
};
static const struct mvebu_mpp_ctrl armada_cp110_mpp_controls[] = {
MPP_FUNC_CTRL(0, 62, NULL, mvebu_regmap_mpp_ctrl),
};
static void mvebu_pinctrl_assign_variant(struct mvebu_mpp_mode *m,
u8 variant)
{
struct mvebu_mpp_ctrl_setting *s;
for (s = m->settings ; s->name ; s++)
s->variant = variant;
}
static int armada_cp110_pinctrl_probe(struct platform_device *pdev)
{
struct mvebu_pinctrl_soc_info *soc;
const struct of_device_id *match =
of_match_device(armada_cp110_pinctrl_of_match, &pdev->dev);
int i;
if (!pdev->dev.parent)
return -ENODEV;
soc = devm_kzalloc(&pdev->dev,
sizeof(struct mvebu_pinctrl_soc_info), GFP_KERNEL);
if (!soc)
return -ENOMEM;
soc->variant = (unsigned long) match->data & 0xff;
soc->controls = armada_cp110_mpp_controls;
soc->ncontrols = ARRAY_SIZE(armada_cp110_mpp_controls);
soc->modes = armada_cp110_mpp_modes;
soc->nmodes = ARRAY_SIZE(armada_cp110_mpp_modes);
for (i = 0; i < ARRAY_SIZE(armada_cp110_mpp_modes); i++) {
struct mvebu_mpp_mode *m = &armada_cp110_mpp_modes[i];
switch (i) {
case 0 ... 31:
pinctrl: mvebu: add additional variant for standalone CP115 With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:07 +03:00
mvebu_pinctrl_assign_variant(m, (V_ARMADA_7K_8K_CPS |
V_CP115_STANDALONE));
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
break;
case 32 ... 38:
pinctrl: mvebu: add additional variant for standalone CP115 With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:07 +03:00
mvebu_pinctrl_assign_variant(m, (V_ARMADA_7K_8K_CPM |
V_CP115_STANDALONE));
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
break;
case 39 ... 43:
pinctrl: mvebu: add additional variant for standalone CP115 With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:07 +03:00
mvebu_pinctrl_assign_variant(m, (V_ARMADA_8K_CPM |
V_CP115_STANDALONE));
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
break;
case 44 ... 62:
pinctrl: mvebu: add additional variant for standalone CP115 With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05 13:16:07 +03:00
mvebu_pinctrl_assign_variant(m, (V_ARMADA_7K_8K_CPM |
V_CP115_STANDALONE));
pinctrl: mvebu: add driver for Armada CP110 pinctrl This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-12 18:34:57 +03:00
break;
}
}
pdev->dev.platform_data = soc;
return mvebu_pinctrl_simple_regmap_probe(pdev, pdev->dev.parent, 0);
}
static struct platform_driver armada_cp110_pinctrl_driver = {
.driver = {
.name = "armada-cp110-pinctrl",
.of_match_table = of_match_ptr(armada_cp110_pinctrl_of_match),
},
.probe = armada_cp110_pinctrl_probe,
};
builtin_platform_driver(armada_cp110_pinctrl_driver);