WSL2-Linux-Kernel/drivers/isdn/hisax/hfc4s8s_l1.c

1709 строки
42 KiB
C
Исходник Обычный вид История

/*************************************************************************/
/* $Id: hfc4s8s_l1.c,v 1.10 2005/02/09 16:31:09 martinb1 Exp $ */
/* HFC-4S/8S low layer interface for Cologne Chip HFC-4S/8S isdn chips */
/* The low layer (L1) is implemented as a loadable module for usage with */
/* the HiSax isdn driver for passive cards. */
/* */
/* Author: Werner Cornelius */
/* (C) 2003 Cornelius Consult (werner@cornelius-consult.de) */
/* */
/* Driver maintained by Cologne Chip */
/* - Martin Bachem, support@colognechip.com */
/* */
/* This driver only works with chip revisions >= 1, older revision 0 */
/* engineering samples (only first manufacturer sample cards) will not */
/* work and are rejected by the driver. */
/* */
/* This file distributed under the GNU GPL. */
/* */
/* See Version History at the end of this file */
/* */
/*************************************************************************/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
#include <linux/wait.h>
#include <asm/io.h>
#include "hisax_if.h"
#include "hfc4s8s_l1.h"
static const char hfc4s8s_rev[] = "Revision: 1.10";
/***************************************************************/
/* adjustable transparent mode fifo threshold */
/* The value defines the used fifo threshold with the equation */
/* */
/* notify number of bytes = 2 * 2 ^ TRANS_FIFO_THRES */
/* */
/* The default value is 5 which results in a buffer size of 64 */
/* and an interrupt rate of 8ms. */
/* The maximum value is 7 due to fifo size restrictions. */
/* Values below 3-4 are not recommended due to high interrupt */
/* load of the processor. For non critical applications the */
/* value should be raised to 7 to reduce any interrupt overhead*/
/***************************************************************/
#define TRANS_FIFO_THRES 5
/*************/
/* constants */
/*************/
#define CLOCKMODE_0 0 /* ext. 24.576 MhZ clk freq, int. single clock mode */
#define CLOCKMODE_1 1 /* ext. 49.576 MhZ clk freq, int. single clock mode */
#define CHIP_ID_SHIFT 4
#define HFC_MAX_ST 8
#define MAX_D_FRAME_SIZE 270
#define MAX_B_FRAME_SIZE 1536
#define TRANS_TIMER_MODE (TRANS_FIFO_THRES & 0xf)
#define TRANS_FIFO_BYTES (2 << TRANS_FIFO_THRES)
#define MAX_F_CNT 0x0f
#define CLKDEL_NT 0x6c
#define CLKDEL_TE 0xf
#define CTRL0_NT 4
#define CTRL0_TE 0
#define L1_TIMER_T4 2 /* minimum in jiffies */
#define L1_TIMER_T3 (7 * HZ) /* activation timeout */
#define L1_TIMER_T1 ((120 * HZ) / 1000) /* NT mode deactivation timeout */
/******************/
/* types and vars */
/******************/
static int card_cnt;
/* private driver_data */
typedef struct {
int chip_id;
int clock_mode;
int max_st_ports;
char *device_name;
} hfc4s8s_param;
static struct pci_device_id hfc4s8s_ids[] = {
{.vendor = PCI_VENDOR_ID_CCD,
.device = PCI_DEVICE_ID_4S,
.subvendor = 0x1397,
.subdevice = 0x08b4,
.driver_data =
(unsigned long) &((hfc4s8s_param) {CHIP_ID_4S, CLOCKMODE_0, 4,
"HFC-4S Evaluation Board"}),
},
{.vendor = PCI_VENDOR_ID_CCD,
.device = PCI_DEVICE_ID_8S,
.subvendor = 0x1397,
.subdevice = 0x16b8,
.driver_data =
(unsigned long) &((hfc4s8s_param) {CHIP_ID_8S, CLOCKMODE_0, 8,
"HFC-8S Evaluation Board"}),
},
{.vendor = PCI_VENDOR_ID_CCD,
.device = PCI_DEVICE_ID_4S,
.subvendor = 0x1397,
.subdevice = 0xb520,
.driver_data =
(unsigned long) &((hfc4s8s_param) {CHIP_ID_4S, CLOCKMODE_1, 4,
"IOB4ST"}),
},
{.vendor = PCI_VENDOR_ID_CCD,
.device = PCI_DEVICE_ID_8S,
.subvendor = 0x1397,
.subdevice = 0xb522,
.driver_data =
(unsigned long) &((hfc4s8s_param) {CHIP_ID_8S, CLOCKMODE_1, 8,
"IOB8ST"}),
},
{}
};
MODULE_DEVICE_TABLE(pci, hfc4s8s_ids);
MODULE_AUTHOR("Werner Cornelius, werner@cornelius-consult.de");
MODULE_DESCRIPTION("ISDN layer 1 for Cologne Chip HFC-4S/8S chips");
MODULE_LICENSE("GPL");
/***********/
/* layer 1 */
/***********/
struct hfc4s8s_btype {
spinlock_t lock;
struct hisax_b_if b_if;
struct hfc4s8s_l1 *l1p;
struct sk_buff_head tx_queue;
struct sk_buff *tx_skb;
struct sk_buff *rx_skb;
__u8 *rx_ptr;
int tx_cnt;
int bchan;
int mode;
};
struct _hfc4s8s_hw;
struct hfc4s8s_l1 {
spinlock_t lock;
struct _hfc4s8s_hw *hw; /* pointer to hardware area */
int l1_state; /* actual l1 state */
struct timer_list l1_timer; /* layer 1 timer structure */
int nt_mode; /* set to nt mode */
int st_num; /* own index */
int enabled; /* interface is enabled */
struct sk_buff_head d_tx_queue; /* send queue */
int tx_cnt; /* bytes to send */
struct hisax_d_if d_if; /* D-channel interface */
struct hfc4s8s_btype b_ch[2]; /* B-channel data */
struct hisax_b_if *b_table[2];
};
/**********************/
/* hardware structure */
/**********************/
typedef struct _hfc4s8s_hw {
spinlock_t lock;
int cardnum;
int ifnum;
int iobase;
int nt_mode;
u_char *membase;
u_char *hw_membase;
void *pdev;
int max_fifo;
hfc4s8s_param driver_data;
int irq;
int fifo_sched_cnt;
struct work_struct tqueue;
struct hfc4s8s_l1 l1[HFC_MAX_ST];
char card_name[60];
struct {
u_char r_irq_ctrl;
u_char r_ctrl0;
volatile u_char r_irq_statech; /* active isdn l1 status */
u_char r_irqmsk_statchg; /* enabled isdn status ints */
u_char r_irq_fifo_blx[8]; /* fifo status registers */
u_char fifo_rx_trans_enables[8]; /* mask for enabled transparent rx fifos */
u_char fifo_slow_timer_service[8]; /* mask for fifos needing slower timer service */
volatile u_char r_irq_oview; /* contents of overview register */
volatile u_char timer_irq;
int timer_usg_cnt; /* number of channels using timer */
} mr;
} hfc4s8s_hw;
/***************************/
/* inline function defines */
/***************************/
#ifdef HISAX_HFC4S8S_PCIMEM /* inline functions memory mapped */
/* memory write and dummy IO read to avoid PCI byte merge problems */
#define Write_hfc8(a, b, c) {(*((volatile u_char *)(a->membase + b)) = c); inb(a->iobase + 4);}
/* memory write without dummy IO access for fifo data access */
#define fWrite_hfc8(a, b, c) (*((volatile u_char *)(a->membase + b)) = c)
#define Read_hfc8(a, b) (*((volatile u_char *)(a->membase + b)))
#define Write_hfc16(a, b, c) (*((volatile unsigned short *)(a->membase + b)) = c)
#define Read_hfc16(a, b) (*((volatile unsigned short *)(a->membase + b)))
#define Write_hfc32(a, b, c) (*((volatile unsigned long *)(a->membase + b)) = c)
#define Read_hfc32(a, b) (*((volatile unsigned long *)(a->membase + b)))
#define wait_busy(a) {while ((Read_hfc8(a, R_STATUS) & M_BUSY));}
#define PCI_ENA_MEMIO 0x03
#else
/* inline functions io mapped */
static inline void
SetRegAddr(hfc4s8s_hw *a, u_char b)
{
outb(b, (a->iobase) + 4);
}
static inline u_char
GetRegAddr(hfc4s8s_hw *a)
{
return (inb((volatile u_int) (a->iobase + 4)));
}
static inline void
Write_hfc8(hfc4s8s_hw *a, u_char b, u_char c)
{
SetRegAddr(a, b);
outb(c, a->iobase);
}
static inline void
fWrite_hfc8(hfc4s8s_hw *a, u_char c)
{
outb(c, a->iobase);
}
static inline void
Write_hfc16(hfc4s8s_hw *a, u_char b, u_short c)
{
SetRegAddr(a, b);
outw(c, a->iobase);
}
static inline void
Write_hfc32(hfc4s8s_hw *a, u_char b, u_long c)
{
SetRegAddr(a, b);
outl(c, a->iobase);
}
static inline void
fWrite_hfc32(hfc4s8s_hw *a, u_long c)
{
outl(c, a->iobase);
}
static inline u_char
Read_hfc8(hfc4s8s_hw *a, u_char b)
{
SetRegAddr(a, b);
return (inb((volatile u_int) a->iobase));
}
static inline u_char
fRead_hfc8(hfc4s8s_hw *a)
{
return (inb((volatile u_int) a->iobase));
}
static inline u_short
Read_hfc16(hfc4s8s_hw *a, u_char b)
{
SetRegAddr(a, b);
return (inw((volatile u_int) a->iobase));
}
static inline u_long
Read_hfc32(hfc4s8s_hw *a, u_char b)
{
SetRegAddr(a, b);
return (inl((volatile u_int) a->iobase));
}
static inline u_long
fRead_hfc32(hfc4s8s_hw *a)
{
return (inl((volatile u_int) a->iobase));
}
static inline void
wait_busy(hfc4s8s_hw *a)
{
SetRegAddr(a, R_STATUS);
while (inb((volatile u_int) a->iobase) & M_BUSY);
}
#define PCI_ENA_REGIO 0x01
#endif /* HISAX_HFC4S8S_PCIMEM */
/******************************************************/
/* function to read critical counter registers that */
/* may be updated by the chip during read */
/******************************************************/
static u_char
Read_hfc8_stable(hfc4s8s_hw *hw, int reg)
{
u_char ref8;
u_char in8;
ref8 = Read_hfc8(hw, reg);
while (((in8 = Read_hfc8(hw, reg)) != ref8)) {
ref8 = in8;
}
return in8;
}
static int
Read_hfc16_stable(hfc4s8s_hw *hw, int reg)
{
int ref16;
int in16;
ref16 = Read_hfc16(hw, reg);
while (((in16 = Read_hfc16(hw, reg)) != ref16)) {
ref16 = in16;
}
return in16;
}
/*****************************/
/* D-channel call from HiSax */
/*****************************/
static void
dch_l2l1(struct hisax_d_if *iface, int pr, void *arg)
{
struct hfc4s8s_l1 *l1 = iface->ifc.priv;
struct sk_buff *skb = (struct sk_buff *) arg;
u_long flags;
switch (pr) {
case (PH_DATA | REQUEST):
if (!l1->enabled) {
dev_kfree_skb(skb);
break;
}
spin_lock_irqsave(&l1->lock, flags);
skb_queue_tail(&l1->d_tx_queue, skb);
if ((skb_queue_len(&l1->d_tx_queue) == 1) &&
(l1->tx_cnt <= 0)) {
l1->hw->mr.r_irq_fifo_blx[l1->st_num] |=
0x10;
spin_unlock_irqrestore(&l1->lock, flags);
schedule_work(&l1->hw->tqueue);
} else
spin_unlock_irqrestore(&l1->lock, flags);
break;
case (PH_ACTIVATE | REQUEST):
if (!l1->enabled)
break;
if (!l1->nt_mode) {
if (l1->l1_state < 6) {
spin_lock_irqsave(&l1->lock,
flags);
Write_hfc8(l1->hw, R_ST_SEL,
l1->st_num);
Write_hfc8(l1->hw, A_ST_WR_STA,
0x60);
mod_timer(&l1->l1_timer,
jiffies + L1_TIMER_T3);
spin_unlock_irqrestore(&l1->lock,
flags);
} else if (l1->l1_state == 7)
l1->d_if.ifc.l1l2(&l1->d_if.ifc,
PH_ACTIVATE |
INDICATION,
NULL);
} else {
if (l1->l1_state != 3) {
spin_lock_irqsave(&l1->lock,
flags);
Write_hfc8(l1->hw, R_ST_SEL,
l1->st_num);
Write_hfc8(l1->hw, A_ST_WR_STA,
0x60);
spin_unlock_irqrestore(&l1->lock,
flags);
} else if (l1->l1_state == 3)
l1->d_if.ifc.l1l2(&l1->d_if.ifc,
PH_ACTIVATE |
INDICATION,
NULL);
}
break;
default:
printk(KERN_INFO
"HFC-4S/8S: Unknown D-chan cmd 0x%x received, ignored\n",
pr);
break;
}
if (!l1->enabled)
l1->d_if.ifc.l1l2(&l1->d_if.ifc,
PH_DEACTIVATE | INDICATION, NULL);
} /* dch_l2l1 */
/*****************************/
/* B-channel call from HiSax */
/*****************************/
static void
bch_l2l1(struct hisax_if *ifc, int pr, void *arg)
{
struct hfc4s8s_btype *bch = ifc->priv;
struct hfc4s8s_l1 *l1 = bch->l1p;
struct sk_buff *skb = (struct sk_buff *) arg;
long mode = (long) arg;
u_long flags;
switch (pr) {
case (PH_DATA | REQUEST):
if (!l1->enabled || (bch->mode == L1_MODE_NULL)) {
dev_kfree_skb(skb);
break;
}
spin_lock_irqsave(&l1->lock, flags);
skb_queue_tail(&bch->tx_queue, skb);
if (!bch->tx_skb && (bch->tx_cnt <= 0)) {
l1->hw->mr.r_irq_fifo_blx[l1->st_num] |=
((bch->bchan == 1) ? 1 : 4);
spin_unlock_irqrestore(&l1->lock, flags);
schedule_work(&l1->hw->tqueue);
} else
spin_unlock_irqrestore(&l1->lock, flags);
break;
case (PH_ACTIVATE | REQUEST):
case (PH_DEACTIVATE | REQUEST):
if (!l1->enabled)
break;
if (pr == (PH_DEACTIVATE | REQUEST))
mode = L1_MODE_NULL;
switch (mode) {
case L1_MODE_HDLC:
spin_lock_irqsave(&l1->lock,
flags);
l1->hw->mr.timer_usg_cnt++;
l1->hw->mr.
fifo_slow_timer_service[l1->
st_num]
|=
((bch->bchan ==
1) ? 0x2 : 0x8);
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan ==
1) ? 0 : 2)));
wait_busy(l1->hw);
Write_hfc8(l1->hw, A_CON_HDLC, 0xc); /* HDLC mode, flag fill, connect ST */
Write_hfc8(l1->hw, A_SUBCH_CFG, 0); /* 8 bits */
Write_hfc8(l1->hw, A_IRQ_MSK, 1); /* enable TX interrupts for hdlc */
Write_hfc8(l1->hw, A_INC_RES_FIFO, 2); /* reset fifo */
wait_busy(l1->hw);
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan ==
1) ? 1 : 3)));
wait_busy(l1->hw);
Write_hfc8(l1->hw, A_CON_HDLC, 0xc); /* HDLC mode, flag fill, connect ST */
Write_hfc8(l1->hw, A_SUBCH_CFG, 0); /* 8 bits */
Write_hfc8(l1->hw, A_IRQ_MSK, 1); /* enable RX interrupts for hdlc */
Write_hfc8(l1->hw, A_INC_RES_FIFO, 2); /* reset fifo */
Write_hfc8(l1->hw, R_ST_SEL,
l1->st_num);
l1->hw->mr.r_ctrl0 |=
(bch->bchan & 3);
Write_hfc8(l1->hw, A_ST_CTRL0,
l1->hw->mr.r_ctrl0);
bch->mode = L1_MODE_HDLC;
spin_unlock_irqrestore(&l1->lock,
flags);
bch->b_if.ifc.l1l2(&bch->b_if.ifc,
PH_ACTIVATE |
INDICATION,
NULL);
break;
case L1_MODE_TRANS:
spin_lock_irqsave(&l1->lock,
flags);
l1->hw->mr.
fifo_rx_trans_enables[l1->
st_num]
|=
((bch->bchan ==
1) ? 0x2 : 0x8);
l1->hw->mr.timer_usg_cnt++;
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan ==
1) ? 0 : 2)));
wait_busy(l1->hw);
Write_hfc8(l1->hw, A_CON_HDLC, 0xf); /* Transparent mode, 1 fill, connect ST */
Write_hfc8(l1->hw, A_SUBCH_CFG, 0); /* 8 bits */
Write_hfc8(l1->hw, A_IRQ_MSK, 0); /* disable TX interrupts */
Write_hfc8(l1->hw, A_INC_RES_FIFO, 2); /* reset fifo */
wait_busy(l1->hw);
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan ==
1) ? 1 : 3)));
wait_busy(l1->hw);
Write_hfc8(l1->hw, A_CON_HDLC, 0xf); /* Transparent mode, 1 fill, connect ST */
Write_hfc8(l1->hw, A_SUBCH_CFG, 0); /* 8 bits */
Write_hfc8(l1->hw, A_IRQ_MSK, 0); /* disable RX interrupts */
Write_hfc8(l1->hw, A_INC_RES_FIFO, 2); /* reset fifo */
Write_hfc8(l1->hw, R_ST_SEL,
l1->st_num);
l1->hw->mr.r_ctrl0 |=
(bch->bchan & 3);
Write_hfc8(l1->hw, A_ST_CTRL0,
l1->hw->mr.r_ctrl0);
bch->mode = L1_MODE_TRANS;
spin_unlock_irqrestore(&l1->lock,
flags);
bch->b_if.ifc.l1l2(&bch->b_if.ifc,
PH_ACTIVATE |
INDICATION,
NULL);
break;
default:
if (bch->mode == L1_MODE_NULL)
break;
spin_lock_irqsave(&l1->lock,
flags);
l1->hw->mr.
fifo_slow_timer_service[l1->
st_num]
&=
~((bch->bchan ==
1) ? 0x3 : 0xc);
l1->hw->mr.
fifo_rx_trans_enables[l1->
st_num]
&=
~((bch->bchan ==
1) ? 0x3 : 0xc);
l1->hw->mr.timer_usg_cnt--;
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan ==
1) ? 0 : 2)));
wait_busy(l1->hw);
Write_hfc8(l1->hw, A_IRQ_MSK, 0); /* disable TX interrupts */
wait_busy(l1->hw);
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan ==
1) ? 1 : 3)));
wait_busy(l1->hw);
Write_hfc8(l1->hw, A_IRQ_MSK, 0); /* disable RX interrupts */
Write_hfc8(l1->hw, R_ST_SEL,
l1->st_num);
l1->hw->mr.r_ctrl0 &=
~(bch->bchan & 3);
Write_hfc8(l1->hw, A_ST_CTRL0,
l1->hw->mr.r_ctrl0);
spin_unlock_irqrestore(&l1->lock,
flags);
bch->mode = L1_MODE_NULL;
bch->b_if.ifc.l1l2(&bch->b_if.ifc,
PH_DEACTIVATE |
INDICATION,
NULL);
if (bch->tx_skb) {
dev_kfree_skb(bch->tx_skb);
bch->tx_skb = NULL;
}
if (bch->rx_skb) {
dev_kfree_skb(bch->rx_skb);
bch->rx_skb = NULL;
}
skb_queue_purge(&bch->tx_queue);
bch->tx_cnt = 0;
bch->rx_ptr = NULL;
break;
}
/* timer is only used when at least one b channel */
/* is set up to transparent mode */
if (l1->hw->mr.timer_usg_cnt) {
Write_hfc8(l1->hw, R_IRQMSK_MISC,
M_TI_IRQMSK);
} else {
Write_hfc8(l1->hw, R_IRQMSK_MISC, 0);
}
break;
default:
printk(KERN_INFO
"HFC-4S/8S: Unknown B-chan cmd 0x%x received, ignored\n",
pr);
break;
}
if (!l1->enabled)
bch->b_if.ifc.l1l2(&bch->b_if.ifc,
PH_DEACTIVATE | INDICATION, NULL);
} /* bch_l2l1 */
/**************************/
/* layer 1 timer function */
/**************************/
static void
hfc_l1_timer(struct hfc4s8s_l1 *l1)
{
u_long flags;
if (!l1->enabled)
return;
spin_lock_irqsave(&l1->lock, flags);
if (l1->nt_mode) {
l1->l1_state = 1;
Write_hfc8(l1->hw, R_ST_SEL, l1->st_num);
Write_hfc8(l1->hw, A_ST_WR_STA, 0x11);
spin_unlock_irqrestore(&l1->lock, flags);
l1->d_if.ifc.l1l2(&l1->d_if.ifc,
PH_DEACTIVATE | INDICATION, NULL);
spin_lock_irqsave(&l1->lock, flags);
l1->l1_state = 1;
Write_hfc8(l1->hw, A_ST_WR_STA, 0x1);
spin_unlock_irqrestore(&l1->lock, flags);
} else {
/* activation timed out */
Write_hfc8(l1->hw, R_ST_SEL, l1->st_num);
Write_hfc8(l1->hw, A_ST_WR_STA, 0x13);
spin_unlock_irqrestore(&l1->lock, flags);
l1->d_if.ifc.l1l2(&l1->d_if.ifc,
PH_DEACTIVATE | INDICATION, NULL);
spin_lock_irqsave(&l1->lock, flags);
Write_hfc8(l1->hw, R_ST_SEL, l1->st_num);
Write_hfc8(l1->hw, A_ST_WR_STA, 0x3);
spin_unlock_irqrestore(&l1->lock, flags);
}
} /* hfc_l1_timer */
/****************************************/
/* a complete D-frame has been received */
/****************************************/
static void
rx_d_frame(struct hfc4s8s_l1 *l1p, int ech)
{
int z1, z2;
u_char f1, f2, df;
struct sk_buff *skb;
u_char *cp;
if (!l1p->enabled)
return;
do {
/* E/D RX fifo */
Write_hfc8(l1p->hw, R_FIFO,
(l1p->st_num * 8 + ((ech) ? 7 : 5)));
wait_busy(l1p->hw);
f1 = Read_hfc8_stable(l1p->hw, A_F1);
f2 = Read_hfc8(l1p->hw, A_F2);
df = f1 - f2;
if ((f1 - f2) < 0)
df = f1 - f2 + MAX_F_CNT + 1;
if (!df) {
return; /* no complete frame in fifo */
}
z1 = Read_hfc16_stable(l1p->hw, A_Z1);
z2 = Read_hfc16(l1p->hw, A_Z2);
z1 = z1 - z2 + 1;
if (z1 < 0)
z1 += 384;
if (!(skb = dev_alloc_skb(MAX_D_FRAME_SIZE))) {
printk(KERN_INFO
"HFC-4S/8S: Could not allocate D/E "
"channel receive buffer");
Write_hfc8(l1p->hw, A_INC_RES_FIFO, 2);
wait_busy(l1p->hw);
return;
}
if (((z1 < 4) || (z1 > MAX_D_FRAME_SIZE))) {
if (skb)
dev_kfree_skb(skb);
/* remove errornous D frame */
if (df == 1) {
/* reset fifo */
Write_hfc8(l1p->hw, A_INC_RES_FIFO, 2);
wait_busy(l1p->hw);
return;
} else {
/* read errornous D frame */
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(l1p->hw, A_FIFO_DATA0);
#endif
while (z1 >= 4) {
#ifdef HISAX_HFC4S8S_PCIMEM
Read_hfc32(l1p->hw, A_FIFO_DATA0);
#else
fRead_hfc32(l1p->hw);
#endif
z1 -= 4;
}
while (z1--)
#ifdef HISAX_HFC4S8S_PCIMEM
Read_hfc8(l1p->hw, A_FIFO_DATA0);
#else
fRead_hfc8(l1p->hw);
#endif
Write_hfc8(l1p->hw, A_INC_RES_FIFO, 1);
wait_busy(l1p->hw);
return;
}
}
cp = skb->data;
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(l1p->hw, A_FIFO_DATA0);
#endif
while (z1 >= 4) {
#ifdef HISAX_HFC4S8S_PCIMEM
*((unsigned long *) cp) =
Read_hfc32(l1p->hw, A_FIFO_DATA0);
#else
*((unsigned long *) cp) = fRead_hfc32(l1p->hw);
#endif
cp += 4;
z1 -= 4;
}
while (z1--)
#ifdef HISAX_HFC4S8S_PCIMEM
*cp++ = Read_hfc8(l1p->hw, A_FIFO_DATA0);
#else
*cp++ = fRead_hfc8(l1p->hw);
#endif
Write_hfc8(l1p->hw, A_INC_RES_FIFO, 1); /* increment f counter */
wait_busy(l1p->hw);
if (*(--cp)) {
dev_kfree_skb(skb);
} else {
skb->len = (cp - skb->data) - 2;
if (ech)
l1p->d_if.ifc.l1l2(&l1p->d_if.ifc,
PH_DATA_E | INDICATION,
skb);
else
l1p->d_if.ifc.l1l2(&l1p->d_if.ifc,
PH_DATA | INDICATION,
skb);
}
} while (1);
} /* rx_d_frame */
/*************************************************************/
/* a B-frame has been received (perhaps not fully completed) */
/*************************************************************/
static void
rx_b_frame(struct hfc4s8s_btype *bch)
{
int z1, z2, hdlc_complete;
u_char f1, f2;
struct hfc4s8s_l1 *l1 = bch->l1p;
struct sk_buff *skb;
if (!l1->enabled || (bch->mode == L1_MODE_NULL))
return;
do {
/* RX Fifo */
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 + ((bch->bchan == 1) ? 1 : 3)));
wait_busy(l1->hw);
if (bch->mode == L1_MODE_HDLC) {
f1 = Read_hfc8_stable(l1->hw, A_F1);
f2 = Read_hfc8(l1->hw, A_F2);
hdlc_complete = ((f1 ^ f2) & MAX_F_CNT);
} else
hdlc_complete = 0;
z1 = Read_hfc16_stable(l1->hw, A_Z1);
z2 = Read_hfc16(l1->hw, A_Z2);
z1 = (z1 - z2);
if (hdlc_complete)
z1++;
if (z1 < 0)
z1 += 384;
if (!z1)
break;
if (!(skb = bch->rx_skb)) {
if (!
(skb =
dev_alloc_skb((bch->mode ==
L1_MODE_TRANS) ? z1
: (MAX_B_FRAME_SIZE + 3)))) {
printk(KERN_ERR
"HFC-4S/8S: Could not allocate B "
"channel receive buffer");
return;
}
bch->rx_ptr = skb->data;
bch->rx_skb = skb;
}
skb->len = (bch->rx_ptr - skb->data) + z1;
/* HDLC length check */
if ((bch->mode == L1_MODE_HDLC) &&
((hdlc_complete && (skb->len < 4)) ||
(skb->len > (MAX_B_FRAME_SIZE + 3)))) {
skb->len = 0;
bch->rx_ptr = skb->data;
Write_hfc8(l1->hw, A_INC_RES_FIFO, 2); /* reset fifo */
wait_busy(l1->hw);
return;
}
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(l1->hw, A_FIFO_DATA0);
#endif
while (z1 >= 4) {
#ifdef HISAX_HFC4S8S_PCIMEM
*((unsigned long *) bch->rx_ptr) =
Read_hfc32(l1->hw, A_FIFO_DATA0);
#else
*((unsigned long *) bch->rx_ptr) =
fRead_hfc32(l1->hw);
#endif
bch->rx_ptr += 4;
z1 -= 4;
}
while (z1--)
#ifdef HISAX_HFC4S8S_PCIMEM
*(bch->rx_ptr++) = Read_hfc8(l1->hw, A_FIFO_DATA0);
#else
*(bch->rx_ptr++) = fRead_hfc8(l1->hw);
#endif
if (hdlc_complete) {
/* increment f counter */
Write_hfc8(l1->hw, A_INC_RES_FIFO, 1);
wait_busy(l1->hw);
/* hdlc crc check */
bch->rx_ptr--;
if (*bch->rx_ptr) {
skb->len = 0;
bch->rx_ptr = skb->data;
continue;
}
skb->len -= 3;
}
if (hdlc_complete || (bch->mode == L1_MODE_TRANS)) {
bch->rx_skb = NULL;
bch->rx_ptr = NULL;
bch->b_if.ifc.l1l2(&bch->b_if.ifc,
PH_DATA | INDICATION, skb);
}
} while (1);
} /* rx_b_frame */
/********************************************/
/* a D-frame has been/should be transmitted */
/********************************************/
static void
tx_d_frame(struct hfc4s8s_l1 *l1p)
{
struct sk_buff *skb;
u_char f1, f2;
u_char *cp;
long cnt;
if (l1p->l1_state != 7)
return;
/* TX fifo */
Write_hfc8(l1p->hw, R_FIFO, (l1p->st_num * 8 + 4));
wait_busy(l1p->hw);
f1 = Read_hfc8(l1p->hw, A_F1);
f2 = Read_hfc8_stable(l1p->hw, A_F2);
if ((f1 ^ f2) & MAX_F_CNT)
return; /* fifo is still filled */
if (l1p->tx_cnt > 0) {
cnt = l1p->tx_cnt;
l1p->tx_cnt = 0;
l1p->d_if.ifc.l1l2(&l1p->d_if.ifc, PH_DATA | CONFIRM,
(void *) cnt);
}
if ((skb = skb_dequeue(&l1p->d_tx_queue))) {
cp = skb->data;
cnt = skb->len;
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(l1p->hw, A_FIFO_DATA0);
#endif
while (cnt >= 4) {
#ifdef HISAX_HFC4S8S_PCIMEM
fWrite_hfc32(l1p->hw, A_FIFO_DATA0,
*(unsigned long *) cp);
#else
SetRegAddr(l1p->hw, A_FIFO_DATA0);
fWrite_hfc32(l1p->hw, *(unsigned long *) cp);
#endif
cp += 4;
cnt -= 4;
}
#ifdef HISAX_HFC4S8S_PCIMEM
while (cnt--)
fWrite_hfc8(l1p->hw, A_FIFO_DATA0, *cp++);
#else
while (cnt--)
fWrite_hfc8(l1p->hw, *cp++);
#endif
l1p->tx_cnt = skb->truesize;
Write_hfc8(l1p->hw, A_INC_RES_FIFO, 1); /* increment f counter */
wait_busy(l1p->hw);
dev_kfree_skb(skb);
}
} /* tx_d_frame */
/******************************************************/
/* a B-frame may be transmitted (or is not completed) */
/******************************************************/
static void
tx_b_frame(struct hfc4s8s_btype *bch)
{
struct sk_buff *skb;
struct hfc4s8s_l1 *l1 = bch->l1p;
u_char *cp;
int cnt, max, hdlc_num;
long ack_len = 0;
if (!l1->enabled || (bch->mode == L1_MODE_NULL))
return;
/* TX fifo */
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 + ((bch->bchan == 1) ? 0 : 2)));
wait_busy(l1->hw);
do {
if (bch->mode == L1_MODE_HDLC) {
hdlc_num = Read_hfc8(l1->hw, A_F1) & MAX_F_CNT;
hdlc_num -=
(Read_hfc8_stable(l1->hw, A_F2) & MAX_F_CNT);
if (hdlc_num < 0)
hdlc_num += 16;
if (hdlc_num >= 15)
break; /* fifo still filled up with hdlc frames */
} else
hdlc_num = 0;
if (!(skb = bch->tx_skb)) {
if (!(skb = skb_dequeue(&bch->tx_queue))) {
l1->hw->mr.fifo_slow_timer_service[l1->
st_num]
&= ~((bch->bchan == 1) ? 1 : 4);
break; /* list empty */
}
bch->tx_skb = skb;
bch->tx_cnt = 0;
}
if (!hdlc_num)
l1->hw->mr.fifo_slow_timer_service[l1->st_num] |=
((bch->bchan == 1) ? 1 : 4);
else
l1->hw->mr.fifo_slow_timer_service[l1->st_num] &=
~((bch->bchan == 1) ? 1 : 4);
max = Read_hfc16_stable(l1->hw, A_Z2);
max -= Read_hfc16(l1->hw, A_Z1);
if (max <= 0)
max += 384;
max--;
if (max < 16)
break; /* don't write to small amounts of bytes */
cnt = skb->len - bch->tx_cnt;
if (cnt > max)
cnt = max;
cp = skb->data + bch->tx_cnt;
bch->tx_cnt += cnt;
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(l1->hw, A_FIFO_DATA0);
#endif
while (cnt >= 4) {
#ifdef HISAX_HFC4S8S_PCIMEM
fWrite_hfc32(l1->hw, A_FIFO_DATA0,
*(unsigned long *) cp);
#else
fWrite_hfc32(l1->hw, *(unsigned long *) cp);
#endif
cp += 4;
cnt -= 4;
}
while (cnt--)
#ifdef HISAX_HFC4S8S_PCIMEM
fWrite_hfc8(l1->hw, A_FIFO_DATA0, *cp++);
#else
fWrite_hfc8(l1->hw, *cp++);
#endif
if (bch->tx_cnt >= skb->len) {
if (bch->mode == L1_MODE_HDLC) {
/* increment f counter */
Write_hfc8(l1->hw, A_INC_RES_FIFO, 1);
}
ack_len += skb->truesize;
bch->tx_skb = NULL;
bch->tx_cnt = 0;
dev_kfree_skb(skb);
} else
/* Re-Select */
Write_hfc8(l1->hw, R_FIFO,
(l1->st_num * 8 +
((bch->bchan == 1) ? 0 : 2)));
wait_busy(l1->hw);
} while (1);
if (ack_len)
bch->b_if.ifc.l1l2((struct hisax_if *) &bch->b_if,
PH_DATA | CONFIRM, (void *) ack_len);
} /* tx_b_frame */
/*************************************/
/* bottom half handler for interrupt */
/*************************************/
static void
hfc4s8s_bh(struct work_struct *work)
{
hfc4s8s_hw *hw = container_of(work, hfc4s8s_hw, tqueue);
u_char b;
struct hfc4s8s_l1 *l1p;
volatile u_char *fifo_stat;
int idx;
/* handle layer 1 state changes */
b = 1;
l1p = hw->l1;
while (b) {
if ((b & hw->mr.r_irq_statech)) {
/* reset l1 event */
hw->mr.r_irq_statech &= ~b;
if (l1p->enabled) {
if (l1p->nt_mode) {
u_char oldstate = l1p->l1_state;
Write_hfc8(l1p->hw, R_ST_SEL,
l1p->st_num);
l1p->l1_state =
Read_hfc8(l1p->hw,
A_ST_RD_STA) & 0xf;
if ((oldstate == 3)
&& (l1p->l1_state != 3))
l1p->d_if.ifc.l1l2(&l1p->
d_if.
ifc,
PH_DEACTIVATE
|
INDICATION,
NULL);
if (l1p->l1_state != 2) {
del_timer(&l1p->l1_timer);
if (l1p->l1_state == 3) {
l1p->d_if.ifc.
l1l2(&l1p->
d_if.ifc,
PH_ACTIVATE
|
INDICATION,
NULL);
}
} else {
/* allow transition */
Write_hfc8(hw, A_ST_WR_STA,
M_SET_G2_G3);
mod_timer(&l1p->l1_timer,
jiffies +
L1_TIMER_T1);
}
printk(KERN_INFO
"HFC-4S/8S: NT ch %d l1 state %d -> %d\n",
l1p->st_num, oldstate,
l1p->l1_state);
} else {
u_char oldstate = l1p->l1_state;
Write_hfc8(l1p->hw, R_ST_SEL,
l1p->st_num);
l1p->l1_state =
Read_hfc8(l1p->hw,
A_ST_RD_STA) & 0xf;
if (((l1p->l1_state == 3) &&
((oldstate == 7) ||
(oldstate == 8))) ||
((timer_pending
(&l1p->l1_timer))
&& (l1p->l1_state == 8))) {
mod_timer(&l1p->l1_timer,
L1_TIMER_T4 +
jiffies);
} else {
if (l1p->l1_state == 7) {
del_timer(&l1p->
l1_timer);
l1p->d_if.ifc.
l1l2(&l1p->
d_if.ifc,
PH_ACTIVATE
|
INDICATION,
NULL);
tx_d_frame(l1p);
}
if (l1p->l1_state == 3) {
if (oldstate != 3)
l1p->d_if.
ifc.
l1l2
(&l1p->
d_if.
ifc,
PH_DEACTIVATE
|
INDICATION,
NULL);
}
}
printk(KERN_INFO
"HFC-4S/8S: TE %d ch %d l1 state %d -> %d\n",
l1p->hw->cardnum,
l1p->st_num, oldstate,
l1p->l1_state);
}
}
}
b <<= 1;
l1p++;
}
/* now handle the fifos */
idx = 0;
fifo_stat = hw->mr.r_irq_fifo_blx;
l1p = hw->l1;
while (idx < hw->driver_data.max_st_ports) {
if (hw->mr.timer_irq) {
*fifo_stat |= hw->mr.fifo_rx_trans_enables[idx];
if (hw->fifo_sched_cnt <= 0) {
*fifo_stat |=
hw->mr.fifo_slow_timer_service[l1p->
st_num];
}
}
/* ignore fifo 6 (TX E fifo) */
*fifo_stat &= 0xff - 0x40;
while (*fifo_stat) {
if (!l1p->nt_mode) {
/* RX Fifo has data to read */
if ((*fifo_stat & 0x20)) {
*fifo_stat &= ~0x20;
rx_d_frame(l1p, 0);
}
/* E Fifo has data to read */
if ((*fifo_stat & 0x80)) {
*fifo_stat &= ~0x80;
rx_d_frame(l1p, 1);
}
/* TX Fifo completed send */
if ((*fifo_stat & 0x10)) {
*fifo_stat &= ~0x10;
tx_d_frame(l1p);
}
}
/* B1 RX Fifo has data to read */
if ((*fifo_stat & 0x2)) {
*fifo_stat &= ~0x2;
rx_b_frame(l1p->b_ch);
}
/* B1 TX Fifo has send completed */
if ((*fifo_stat & 0x1)) {
*fifo_stat &= ~0x1;
tx_b_frame(l1p->b_ch);
}
/* B2 RX Fifo has data to read */
if ((*fifo_stat & 0x8)) {
*fifo_stat &= ~0x8;
rx_b_frame(l1p->b_ch + 1);
}
/* B2 TX Fifo has send completed */
if ((*fifo_stat & 0x4)) {
*fifo_stat &= ~0x4;
tx_b_frame(l1p->b_ch + 1);
}
}
fifo_stat++;
l1p++;
idx++;
}
if (hw->fifo_sched_cnt <= 0)
hw->fifo_sched_cnt += (1 << (7 - TRANS_TIMER_MODE));
hw->mr.timer_irq = 0; /* clear requested timer irq */
} /* hfc4s8s_bh */
/*********************/
/* interrupt handler */
/*********************/
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
hfc4s8s_interrupt(int intno, void *dev_id)
{
hfc4s8s_hw *hw = dev_id;
u_char b, ovr;
volatile u_char *ovp;
int idx;
u_char old_ioreg;
if (!hw || !(hw->mr.r_irq_ctrl & M_GLOB_IRQ_EN))
return IRQ_NONE;
#ifndef HISAX_HFC4S8S_PCIMEM
/* read current selected regsister */
old_ioreg = GetRegAddr(hw);
#endif
/* Layer 1 State change */
hw->mr.r_irq_statech |=
(Read_hfc8(hw, R_SCI) & hw->mr.r_irqmsk_statchg);
if (!
(b = (Read_hfc8(hw, R_STATUS) & (M_MISC_IRQSTA | M_FR_IRQSTA)))
&& !hw->mr.r_irq_statech) {
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(hw, old_ioreg);
#endif
return IRQ_NONE;
}
/* timer event */
if (Read_hfc8(hw, R_IRQ_MISC) & M_TI_IRQ) {
hw->mr.timer_irq = 1;
hw->fifo_sched_cnt--;
}
/* FIFO event */
if ((ovr = Read_hfc8(hw, R_IRQ_OVIEW))) {
hw->mr.r_irq_oview |= ovr;
idx = R_IRQ_FIFO_BL0;
ovp = hw->mr.r_irq_fifo_blx;
while (ovr) {
if ((ovr & 1)) {
*ovp |= Read_hfc8(hw, idx);
}
ovp++;
idx++;
ovr >>= 1;
}
}
/* queue the request to allow other cards to interrupt */
schedule_work(&hw->tqueue);
#ifndef HISAX_HFC4S8S_PCIMEM
SetRegAddr(hw, old_ioreg);
#endif
return IRQ_HANDLED;
} /* hfc4s8s_interrupt */
/***********************************************************************/
/* reset the complete chip, don't release the chips irq but disable it */
/***********************************************************************/
static void
chipreset(hfc4s8s_hw *hw)
{
u_long flags;
spin_lock_irqsave(&hw->lock, flags);
Write_hfc8(hw, R_CTRL, 0); /* use internal RAM */
Write_hfc8(hw, R_RAM_MISC, 0); /* 32k*8 RAM */
Write_hfc8(hw, R_FIFO_MD, 0); /* fifo mode 386 byte/fifo simple mode */
Write_hfc8(hw, R_CIRM, M_SRES); /* reset chip */
hw->mr.r_irq_ctrl = 0; /* interrupt is inactive */
spin_unlock_irqrestore(&hw->lock, flags);
udelay(3);
Write_hfc8(hw, R_CIRM, 0); /* disable reset */
wait_busy(hw);
Write_hfc8(hw, R_PCM_MD0, M_PCM_MD); /* master mode */
Write_hfc8(hw, R_RAM_MISC, M_FZ_MD); /* transmit fifo option */
if (hw->driver_data.clock_mode == 1)
Write_hfc8(hw, R_BRG_PCM_CFG, M_PCM_CLK); /* PCM clk / 2 */
Write_hfc8(hw, R_TI_WD, TRANS_TIMER_MODE); /* timer interval */
memset(&hw->mr, 0, sizeof(hw->mr));
} /* chipreset */
/********************************************/
/* disable/enable hardware in nt or te mode */
/********************************************/
static void
hfc_hardware_enable(hfc4s8s_hw *hw, int enable, int nt_mode)
{
u_long flags;
char if_name[40];
int i;
if (enable) {
/* save system vars */
hw->nt_mode = nt_mode;
/* enable fifo and state irqs, but not global irq enable */
hw->mr.r_irq_ctrl = M_FIFO_IRQ;
Write_hfc8(hw, R_IRQ_CTRL, hw->mr.r_irq_ctrl);
hw->mr.r_irqmsk_statchg = 0;
Write_hfc8(hw, R_SCI_MSK, hw->mr.r_irqmsk_statchg);
Write_hfc8(hw, R_PWM_MD, 0x80);
Write_hfc8(hw, R_PWM1, 26);
if (!nt_mode)
Write_hfc8(hw, R_ST_SYNC, M_AUTO_SYNC);
/* enable the line interfaces and fifos */
for (i = 0; i < hw->driver_data.max_st_ports; i++) {
hw->mr.r_irqmsk_statchg |= (1 << i);
Write_hfc8(hw, R_SCI_MSK, hw->mr.r_irqmsk_statchg);
Write_hfc8(hw, R_ST_SEL, i);
Write_hfc8(hw, A_ST_CLK_DLY,
((nt_mode) ? CLKDEL_NT : CLKDEL_TE));
hw->mr.r_ctrl0 = ((nt_mode) ? CTRL0_NT : CTRL0_TE);
Write_hfc8(hw, A_ST_CTRL0, hw->mr.r_ctrl0);
Write_hfc8(hw, A_ST_CTRL2, 3);
Write_hfc8(hw, A_ST_WR_STA, 0); /* enable state machine */
hw->l1[i].enabled = 1;
hw->l1[i].nt_mode = nt_mode;
if (!nt_mode) {
/* setup E-fifo */
Write_hfc8(hw, R_FIFO, i * 8 + 7); /* E fifo */
wait_busy(hw);
Write_hfc8(hw, A_CON_HDLC, 0x11); /* HDLC mode, 1 fill, connect ST */
Write_hfc8(hw, A_SUBCH_CFG, 2); /* only 2 bits */
Write_hfc8(hw, A_IRQ_MSK, 1); /* enable interrupt */
Write_hfc8(hw, A_INC_RES_FIFO, 2); /* reset fifo */
wait_busy(hw);
/* setup D RX-fifo */
Write_hfc8(hw, R_FIFO, i * 8 + 5); /* RX fifo */
wait_busy(hw);
Write_hfc8(hw, A_CON_HDLC, 0x11); /* HDLC mode, 1 fill, connect ST */
Write_hfc8(hw, A_SUBCH_CFG, 2); /* only 2 bits */
Write_hfc8(hw, A_IRQ_MSK, 1); /* enable interrupt */
Write_hfc8(hw, A_INC_RES_FIFO, 2); /* reset fifo */
wait_busy(hw);
/* setup D TX-fifo */
Write_hfc8(hw, R_FIFO, i * 8 + 4); /* TX fifo */
wait_busy(hw);
Write_hfc8(hw, A_CON_HDLC, 0x11); /* HDLC mode, 1 fill, connect ST */
Write_hfc8(hw, A_SUBCH_CFG, 2); /* only 2 bits */
Write_hfc8(hw, A_IRQ_MSK, 1); /* enable interrupt */
Write_hfc8(hw, A_INC_RES_FIFO, 2); /* reset fifo */
wait_busy(hw);
}
sprintf(if_name, "hfc4s8s_%d%d_", hw->cardnum, i);
if (hisax_register
(&hw->l1[i].d_if, hw->l1[i].b_table, if_name,
((nt_mode) ? 3 : 2))) {
hw->l1[i].enabled = 0;
hw->mr.r_irqmsk_statchg &= ~(1 << i);
Write_hfc8(hw, R_SCI_MSK,
hw->mr.r_irqmsk_statchg);
printk(KERN_INFO
"HFC-4S/8S: Unable to register S/T device %s, break\n",
if_name);
break;
}
}
spin_lock_irqsave(&hw->lock, flags);
hw->mr.r_irq_ctrl |= M_GLOB_IRQ_EN;
Write_hfc8(hw, R_IRQ_CTRL, hw->mr.r_irq_ctrl);
spin_unlock_irqrestore(&hw->lock, flags);
} else {
/* disable hardware */
spin_lock_irqsave(&hw->lock, flags);
hw->mr.r_irq_ctrl &= ~M_GLOB_IRQ_EN;
Write_hfc8(hw, R_IRQ_CTRL, hw->mr.r_irq_ctrl);
spin_unlock_irqrestore(&hw->lock, flags);
for (i = hw->driver_data.max_st_ports - 1; i >= 0; i--) {
hw->l1[i].enabled = 0;
hisax_unregister(&hw->l1[i].d_if);
del_timer(&hw->l1[i].l1_timer);
skb_queue_purge(&hw->l1[i].d_tx_queue);
skb_queue_purge(&hw->l1[i].b_ch[0].tx_queue);
skb_queue_purge(&hw->l1[i].b_ch[1].tx_queue);
}
chipreset(hw);
}
} /* hfc_hardware_enable */
/******************************************/
/* disable memory mapped ports / io ports */
/******************************************/
static void
release_pci_ports(hfc4s8s_hw *hw)
{
pci_write_config_word(hw->pdev, PCI_COMMAND, 0);
#ifdef HISAX_HFC4S8S_PCIMEM
if (hw->membase)
iounmap((void *) hw->membase);
#else
if (hw->iobase)
release_region(hw->iobase, 8);
#endif
}
/*****************************************/
/* enable memory mapped ports / io ports */
/*****************************************/
static void
enable_pci_ports(hfc4s8s_hw *hw)
{
#ifdef HISAX_HFC4S8S_PCIMEM
pci_write_config_word(hw->pdev, PCI_COMMAND, PCI_ENA_MEMIO);
#else
pci_write_config_word(hw->pdev, PCI_COMMAND, PCI_ENA_REGIO);
#endif
}
/*************************************/
/* initialise the HFC-4s/8s hardware */
/* return 0 on success. */
/*************************************/
static int
setup_instance(hfc4s8s_hw *hw)
{
int err = -EIO;
int i;
for (i = 0; i < HFC_MAX_ST; i++) {
struct hfc4s8s_l1 *l1p;
l1p = hw->l1 + i;
spin_lock_init(&l1p->lock);
l1p->hw = hw;
l1p->l1_timer.function = (void *) hfc_l1_timer;
l1p->l1_timer.data = (long) (l1p);
init_timer(&l1p->l1_timer);
l1p->st_num = i;
skb_queue_head_init(&l1p->d_tx_queue);
l1p->d_if.ifc.priv = hw->l1 + i;
l1p->d_if.ifc.l2l1 = (void *) dch_l2l1;
spin_lock_init(&l1p->b_ch[0].lock);
l1p->b_ch[0].b_if.ifc.l2l1 = (void *) bch_l2l1;
l1p->b_ch[0].b_if.ifc.priv = (void *) &l1p->b_ch[0];
l1p->b_ch[0].l1p = hw->l1 + i;
l1p->b_ch[0].bchan = 1;
l1p->b_table[0] = &l1p->b_ch[0].b_if;
skb_queue_head_init(&l1p->b_ch[0].tx_queue);
spin_lock_init(&l1p->b_ch[1].lock);
l1p->b_ch[1].b_if.ifc.l2l1 = (void *) bch_l2l1;
l1p->b_ch[1].b_if.ifc.priv = (void *) &l1p->b_ch[1];
l1p->b_ch[1].l1p = hw->l1 + i;
l1p->b_ch[1].bchan = 2;
l1p->b_table[1] = &l1p->b_ch[1].b_if;
skb_queue_head_init(&l1p->b_ch[1].tx_queue);
}
enable_pci_ports(hw);
chipreset(hw);
i = Read_hfc8(hw, R_CHIP_ID) >> CHIP_ID_SHIFT;
if (i != hw->driver_data.chip_id) {
printk(KERN_INFO
"HFC-4S/8S: invalid chip id 0x%x instead of 0x%x, card ignored\n",
i, hw->driver_data.chip_id);
goto out;
}
i = Read_hfc8(hw, R_CHIP_RV) & 0xf;
if (!i) {
printk(KERN_INFO
"HFC-4S/8S: chip revision 0 not supported, card ignored\n");
goto out;
}
INIT_WORK(&hw->tqueue, hfc4s8s_bh);
if (request_irq
(hw->irq, hfc4s8s_interrupt, IRQF_SHARED, hw->card_name, hw)) {
printk(KERN_INFO
"HFC-4S/8S: unable to alloc irq %d, card ignored\n",
hw->irq);
goto out;
}
#ifdef HISAX_HFC4S8S_PCIMEM
printk(KERN_INFO
"HFC-4S/8S: found PCI card at membase 0x%p, irq %d\n",
hw->hw_membase, hw->irq);
#else
printk(KERN_INFO
"HFC-4S/8S: found PCI card at iobase 0x%x, irq %d\n",
hw->iobase, hw->irq);
#endif
hfc_hardware_enable(hw, 1, 0);
return (0);
out:
hw->irq = 0;
release_pci_ports(hw);
kfree(hw);
return (err);
}
/*****************************************/
/* PCI hotplug interface: probe new card */
/*****************************************/
static int
hfc4s8s_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int err = -ENOMEM;
hfc4s8s_param *driver_data = (hfc4s8s_param *) ent->driver_data;
hfc4s8s_hw *hw;
if (!(hw = kzalloc(sizeof(hfc4s8s_hw), GFP_ATOMIC))) {
printk(KERN_ERR "No kmem for HFC-4S/8S card\n");
return (err);
}
hw->pdev = pdev;
err = pci_enable_device(pdev);
if (err)
goto out;
hw->cardnum = card_cnt;
sprintf(hw->card_name, "hfc4s8s_%d", hw->cardnum);
printk(KERN_INFO "HFC-4S/8S: found adapter %s (%s) at %s\n",
driver_data->device_name, hw->card_name, pci_name(pdev));
spin_lock_init(&hw->lock);
hw->driver_data = *driver_data;
hw->irq = pdev->irq;
hw->iobase = pci_resource_start(pdev, 0);
#ifdef HISAX_HFC4S8S_PCIMEM
hw->hw_membase = (u_char *) pci_resource_start(pdev, 1);
hw->membase = ioremap((ulong) hw->hw_membase, 256);
#else
if (!request_region(hw->iobase, 8, hw->card_name)) {
printk(KERN_INFO
"HFC-4S/8S: failed to rquest address space at 0x%04x\n",
hw->iobase);
goto out;
}
#endif
pci_set_drvdata(pdev, hw);
err = setup_instance(hw);
if (!err)
card_cnt++;
return (err);
out:
kfree(hw);
return (err);
}
/**************************************/
/* PCI hotplug interface: remove card */
/**************************************/
static void
hfc4s8s_remove(struct pci_dev *pdev)
{
hfc4s8s_hw *hw = pci_get_drvdata(pdev);
printk(KERN_INFO "HFC-4S/8S: removing card %d\n", hw->cardnum);
hfc_hardware_enable(hw, 0, 0);
if (hw->irq)
free_irq(hw->irq, hw);
hw->irq = 0;
release_pci_ports(hw);
card_cnt--;
pci_disable_device(pdev);
kfree(hw);
return;
}
static struct pci_driver hfc4s8s_driver = {
.name = "hfc4s8s_l1",
.probe = hfc4s8s_probe,
.remove = hfc4s8s_remove,
.id_table = hfc4s8s_ids,
};
/**********************/
/* driver Module init */
/**********************/
static int __init
hfc4s8s_module_init(void)
{
int err;
printk(KERN_INFO
"HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, %s\n",
hfc4s8s_rev);
printk(KERN_INFO
"HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de\n");
card_cnt = 0;
err = pci_register_driver(&hfc4s8s_driver);
if (err < 0) {
goto out;
}
printk(KERN_INFO "HFC-4S/8S: found %d cards\n", card_cnt);
return 0;
out:
return (err);
} /* hfc4s8s_init_hw */
/*************************************/
/* driver module exit : */
/* release the HFC-4s/8s hardware */
/*************************************/
static void __exit
hfc4s8s_module_exit(void)
{
pci_unregister_driver(&hfc4s8s_driver);
printk(KERN_INFO "HFC-4S/8S: module removed\n");
} /* hfc4s8s_release_hw */
module_init(hfc4s8s_module_init);
module_exit(hfc4s8s_module_exit);