microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/arm/configs/integrator_defconfig

87 строки
1.9 KiB
Plaintext
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_SYSVIPC=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 16:00:33 +04:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-20 11:57:52 +03:00
CONFIG_PREEMPT=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 09:12:18 +04:00
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
ARM: integrator: set V4T and V5 as default multitargets When switching the Integrator machines to multiplatform, the V7 target becomes default, but most Integrators are V4T or V5, so set these two as default in the defconfig and deselect V7. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27 12:44:14 +04:00
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 16:00:33 +04:00
CONFIG_INTEGRATOR_IMPD1=y
ARM: defconfig: update the Integrator defconfig The Integrators defconfig have changed due to changes in Kconfig for the CPU types, they use the physmap OF NOR driver and syscon for LEDs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-08-10 11:52:12 +03:00
CONFIG_ARCH_INTEGRATOR_CP=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 09:41:19 +04:00
CONFIG_AEABI=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 16:00:33 +04:00
# CONFIG_ATAGS is not set
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 09:41:19 +04:00
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
ARM: defconfig: turn on the DT cpufreq for Integrator The Integrators are now migrated to handle the CPUfreq scaling using the generic devicetree CPUfreq driver using the common clock framework and have the required device tree modifications, so turn off the old driver and turn on the new generic driver. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-08-10 11:47:11 +03:00
CONFIG_CPUFREQ_DT=y
ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-20 11:57:52 +03:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 09:12:18 +04:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-20 11:57:52 +03:00
CONFIG_PCI=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 09:41:19 +04:00
CONFIG_MTD_PHYSMAP=y
ARM: defconfig: update the Integrator defconfig The Integrators defconfig have changed due to changes in Kconfig for the CPU types, they use the physmap OF NOR driver and syscon for LEDs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-08-10 11:52:12 +03:00
CONFIG_MTD_PHYSMAP_OF=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_E100=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 13:50:09 +04:00
CONFIG_SMC91X=y
ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-20 11:57:52 +03:00
CONFIG_INPUT_EVDEV=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
# CONFIG_KEYBOARD_ATKBD is not set
ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-20 11:57:52 +03:00
CONFIG_KEYBOARD_GPIO=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
# CONFIG_SERIO_SERPORT is not set
ARM: defconfig: integrator: Switch to DRM This switches the ARM Integrator to use the new PL11x DRM driver. We need CMA enabled to get coherent allocations at all times. The dumb VGA DAC bridge is needed for the VGA output on the reference designs, and backlight is needed when using an external display. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22 18:09:31 +03:00
CONFIG_DRM=y
ARM: configs: Update Integrator defconfig Update the Integrator defconfig to the changes from the recent kernel cycles and especially the v5.9-rc1 changes. - Move options around as a result of Kconfig changes. - Drop the ZBOOT_ROM* stuff that doesn't exist anymore. - Select GPIO input and evdev as used by the pushbuttons on the machine. - Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the driver, but the simple bridge requires another bridge, the display connector bridge, in order to work, so this is required to have graphics working properly in kernel v5.9-rc1+ Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-20 11:57:52 +03:00
CONFIG_DRM_DISPLAY_CONNECTOR=y
drm/bridge: dumb-vga-dac: Rename driver to simple-bridge The dumb-vga-dac driver can support simple DRM bridges without being limited to VGA DACs. Rename it to simple-bridge. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
2020-02-26 14:24:31 +03:00
CONFIG_DRM_SIMPLE_BRIDGE=y
ARM: defconfig: integrator: Switch to DRM This switches the ARM Integrator to use the new PL11x DRM driver. We need CMA enabled to get coherent allocations at all times. The dumb VGA DAC bridge is needed for the VGA output on the reference designs, and backlight is needed when using an external display. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22 18:09:31 +03:00
CONFIG_DRM_PL111=y
ARM: configs: Update Integrator defconfig This updates the Integrator defconfig for the changes in the v5.14-rc1 kernel: - The Framebuffer CONFIG_FB needs to be explicitly selected or we don't get any framebuffer anymore. DRM has stopped to select FB because of circular dependency. - Drop the unused Matrox FB drivers that are only used with specific PCI cards. Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210714122703.212609-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-14 15:27:03 +03:00
CONFIG_FB=y
ARM: defconfig: integrator: Switch to DRM This switches the ARM Integrator to use the new PL11x DRM driver. We need CMA enabled to get coherent allocations at all times. The dumb VGA DAC bridge is needed for the VGA output on the reference designs, and backlight is needed when using an external display. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22 18:09:31 +03:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 13:50:09 +04:00
# CONFIG_VGA_CONSOLE is not set
ARM: defconfig: integrator: Switch to DRM This switches the ARM Integrator to use the new PL11x DRM driver. We need CMA enabled to get coherent allocations at all times. The dumb VGA DAC bridge is needed for the VGA output on the reference designs, and backlight is needed when using an external display. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22 18:09:31 +03:00
CONFIG_LOGO=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 13:50:09 +04:00
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 16:00:33 +04:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: defconfig: update the Integrator defconfig The Integrators defconfig have changed due to changes in Kconfig for the CPU types, they use the physmap OF NOR driver and syscon for LEDs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-08-10 11:52:12 +03:00
CONFIG_LEDS_SYSCON=y
ARM: integrator: update defconfig This updates the integrator defconfig, apart from the usual re-shuffling of symbols due to restructuring of the kernel Kconfig this will also: - Enable IM-PD1 so all hardware is enabled out-of-the-box - Enable the LEDs class and heartbeat trigger, so that the LED driver in plat-versatile/ is compiled. - Enale some debug code like the CLK debug. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-10 16:00:33 +04:00
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
ARM: 7102/1: mach-integrator: update defconfig Update the Integrator defconfig with some sensible defaults: - Compile a combined image supporting Integrator/AP and Integrator/CP, with the core modules CM720, CM920, CM922, CM926, CM1020, CM1022 and CM1026 in a single image, this works just fine and gives some nice compilation coverage - NOHZ (tickless) and HRTIMERS turned on - Compile using EABI, let's assume recent compilers are used now (tested using GCC 4.4.1) - Remove forced 32MiB at command line, the bootloader usually knows this better, and my U-Boot patches nowadays make that boot loader pass the correct adjusted value - Enable the MTD Physmap flash driver, so that the changes done earlier by Marc Zyngier replacing integrator-flash takes effect - Enable the PL030 RTC driver that has not been default-compiled with any config for a while This has been tested on the real hardware Integrator AP with both an ARM920T and ARM926EJ-S core module. Cc: Marc Zyngier <Marc.Zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-27 09:41:19 +04:00
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL030=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_EXT2_FS=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 13:50:09 +04:00
CONFIG_VFAT_FS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 09:12:18 +04:00
CONFIG_ROOT_NFS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-04 13:50:09 +04:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
CONFIG_MAGIC_SYSRQ=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 09:12:18 +04:00
CONFIG_DEBUG_KERNEL=y