WSL2-Linux-Kernel/drivers/acpi/prmt.c

335 строки
8.5 KiB
C
Исходник Обычный вид История

ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* Author: Erik Kaneda <erik.kaneda@intel.com>
* Copyright 2020 Intel Corporation
*
* prmt.c
*
* Each PRM service is an executable that is run in a restricted environment
* that is invoked by writing to the PlatformRtMechanism OperationRegion from
* AML bytecode.
*
* init_prmt initializes the Platform Runtime Mechanism (PRM) services by
* processing data in the PRMT as well as registering an ACPI OperationRegion
* handler for the PlatformRtMechanism subtype.
*
*/
#include <linux/kernel.h>
#include <linux/efi.h>
#include <linux/acpi.h>
#include <linux/prmt.h>
#include <asm/efi.h>
#pragma pack(1)
struct prm_mmio_addr_range {
u64 phys_addr;
u64 virt_addr;
u32 length;
};
struct prm_mmio_info {
u64 mmio_count;
struct prm_mmio_addr_range addr_ranges[];
};
struct prm_buffer {
u8 prm_status;
u64 efi_status;
u8 prm_cmd;
guid_t handler_guid;
};
struct prm_context_buffer {
char signature[ACPI_NAMESEG_SIZE];
u16 revision;
u16 reserved;
guid_t identifier;
u64 static_data_buffer;
struct prm_mmio_info *mmio_ranges;
};
#pragma pack()
static LIST_HEAD(prm_module_list);
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
struct prm_handler_info {
guid_t guid;
void *handler_addr;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
u64 static_data_buffer_addr;
u64 acpi_param_buffer_addr;
struct list_head handler_list;
};
struct prm_module_info {
guid_t guid;
u16 major_rev;
u16 minor_rev;
u16 handler_count;
struct prm_mmio_info *mmio_info;
bool updatable;
struct list_head module_list;
struct prm_handler_info handlers[];
};
static u64 efi_pa_va_lookup(u64 pa)
{
efi_memory_desc_t *md;
u64 pa_offset = pa & ~PAGE_MASK;
u64 page = pa & PAGE_MASK;
for_each_efi_memory_desc(md) {
if (md->phys_addr < pa && pa < md->phys_addr + PAGE_SIZE * md->num_pages)
return pa_offset + md->virt_addr + page - md->phys_addr;
}
return 0;
}
#define get_first_handler(a) ((struct acpi_prmt_handler_info *) ((char *) (a) + a->handler_info_offset))
#define get_next_handler(a) ((struct acpi_prmt_handler_info *) (sizeof(struct acpi_prmt_handler_info) + (char *) a))
static int __init
acpi_parse_prmt(union acpi_subtable_headers *header, const unsigned long end)
{
struct acpi_prmt_module_info *module_info;
struct acpi_prmt_handler_info *handler_info;
struct prm_handler_info *th;
struct prm_module_info *tm;
u64 *mmio_count;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
u64 cur_handler = 0;
u32 module_info_size = 0;
u64 mmio_range_size = 0;
void *temp_mmio;
module_info = (struct acpi_prmt_module_info *) header;
module_info_size = struct_size(tm, handlers, module_info->handler_info_count);
tm = kmalloc(module_info_size, GFP_KERNEL);
if (!tm)
goto parse_prmt_out1;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
guid_copy(&tm->guid, (guid_t *) module_info->module_guid);
tm->major_rev = module_info->major_rev;
tm->minor_rev = module_info->minor_rev;
tm->handler_count = module_info->handler_info_count;
tm->updatable = true;
if (module_info->mmio_list_pointer) {
/*
* Each module is associated with a list of addr
* ranges that it can use during the service
*/
mmio_count = (u64 *) memremap(module_info->mmio_list_pointer, 8, MEMREMAP_WB);
if (!mmio_count)
goto parse_prmt_out2;
mmio_range_size = struct_size(tm->mmio_info, addr_ranges, *mmio_count);
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
tm->mmio_info = kmalloc(mmio_range_size, GFP_KERNEL);
if (!tm->mmio_info)
goto parse_prmt_out3;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
temp_mmio = memremap(module_info->mmio_list_pointer, mmio_range_size, MEMREMAP_WB);
if (!temp_mmio)
goto parse_prmt_out4;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
memmove(tm->mmio_info, temp_mmio, mmio_range_size);
} else {
tm->mmio_info = kmalloc(sizeof(*tm->mmio_info), GFP_KERNEL);
if (!tm->mmio_info)
goto parse_prmt_out2;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
tm->mmio_info->mmio_count = 0;
}
INIT_LIST_HEAD(&tm->module_list);
list_add(&tm->module_list, &prm_module_list);
handler_info = get_first_handler(module_info);
do {
th = &tm->handlers[cur_handler];
guid_copy(&th->guid, (guid_t *)handler_info->handler_guid);
th->handler_addr = (void *)efi_pa_va_lookup(handler_info->handler_address);
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
th->static_data_buffer_addr = efi_pa_va_lookup(handler_info->static_data_buffer_address);
th->acpi_param_buffer_addr = efi_pa_va_lookup(handler_info->acpi_param_buffer_address);
} while (++cur_handler < tm->handler_count && (handler_info = get_next_handler(handler_info)));
return 0;
parse_prmt_out4:
kfree(tm->mmio_info);
parse_prmt_out3:
memunmap(mmio_count);
parse_prmt_out2:
kfree(tm);
parse_prmt_out1:
return -ENOMEM;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
}
#define GET_MODULE 0
#define GET_HANDLER 1
static void *find_guid_info(const guid_t *guid, u8 mode)
{
struct prm_handler_info *cur_handler;
struct prm_module_info *cur_module;
int i = 0;
list_for_each_entry(cur_module, &prm_module_list, module_list) {
for (i = 0; i < cur_module->handler_count; ++i) {
cur_handler = &cur_module->handlers[i];
if (guid_equal(guid, &cur_handler->guid)) {
if (mode == GET_MODULE)
return (void *)cur_module;
else
return (void *)cur_handler;
}
}
}
return NULL;
}
static struct prm_module_info *find_prm_module(const guid_t *guid)
{
return (struct prm_module_info *)find_guid_info(guid, GET_MODULE);
}
static struct prm_handler_info *find_prm_handler(const guid_t *guid)
{
return (struct prm_handler_info *) find_guid_info(guid, GET_HANDLER);
}
/* In-coming PRM commands */
#define PRM_CMD_RUN_SERVICE 0
#define PRM_CMD_START_TRANSACTION 1
#define PRM_CMD_END_TRANSACTION 2
/* statuses that can be passed back to ASL */
#define PRM_HANDLER_SUCCESS 0
#define PRM_HANDLER_ERROR 1
#define INVALID_PRM_COMMAND 2
#define PRM_HANDLER_GUID_NOT_FOUND 3
#define UPDATE_LOCK_ALREADY_HELD 4
#define UPDATE_UNLOCK_WITHOUT_LOCK 5
/*
* This is the PlatformRtMechanism opregion space handler.
* @function: indicates the read/write. In fact as the PlatformRtMechanism
* message is driven by command, only write is meaningful.
*
* @addr : not used
* @bits : not used.
* @value : it is an in/out parameter. It points to the PRM message buffer.
* @handler_context: not used
*/
static acpi_status acpi_platformrt_space_handler(u32 function,
acpi_physical_address addr,
u32 bits, acpi_integer *value,
void *handler_context,
void *region_context)
{
struct prm_buffer *buffer = ACPI_CAST_PTR(struct prm_buffer, value);
struct prm_handler_info *handler;
struct prm_module_info *module;
efi_status_t status;
struct prm_context_buffer context;
/*
* The returned acpi_status will always be AE_OK. Error values will be
* saved in the first byte of the PRM message buffer to be used by ASL.
*/
switch (buffer->prm_cmd) {
case PRM_CMD_RUN_SERVICE:
handler = find_prm_handler(&buffer->handler_guid);
module = find_prm_module(&buffer->handler_guid);
if (!handler || !module)
goto invalid_guid;
ACPI_COPY_NAMESEG(context.signature, "PRMC");
context.revision = 0x0;
context.reserved = 0x0;
context.identifier = handler->guid;
context.static_data_buffer = handler->static_data_buffer_addr;
context.mmio_ranges = module->mmio_info;
status = efi_call_virt_pointer(handler, handler_addr,
handler->acpi_param_buffer_addr,
&context);
if (status == EFI_SUCCESS) {
buffer->prm_status = PRM_HANDLER_SUCCESS;
} else {
buffer->prm_status = PRM_HANDLER_ERROR;
buffer->efi_status = status;
}
break;
case PRM_CMD_START_TRANSACTION:
module = find_prm_module(&buffer->handler_guid);
if (!module)
goto invalid_guid;
if (module->updatable)
module->updatable = false;
else
buffer->prm_status = UPDATE_LOCK_ALREADY_HELD;
break;
case PRM_CMD_END_TRANSACTION:
module = find_prm_module(&buffer->handler_guid);
if (!module)
goto invalid_guid;
if (module->updatable)
buffer->prm_status = UPDATE_UNLOCK_WITHOUT_LOCK;
else
module->updatable = true;
break;
default:
buffer->prm_status = INVALID_PRM_COMMAND;
break;
}
return AE_OK;
invalid_guid:
buffer->prm_status = PRM_HANDLER_GUID_NOT_FOUND;
return AE_OK;
}
void __init init_prmt(void)
{
struct acpi_table_header *tbl;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
acpi_status status;
int mc;
status = acpi_get_table(ACPI_SIG_PRMT, 0, &tbl);
if (ACPI_FAILURE(status))
return;
mc = acpi_table_parse_entries(ACPI_SIG_PRMT, sizeof(struct acpi_table_prmt) +
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
sizeof (struct acpi_table_prmt_header),
0, acpi_parse_prmt, 0);
acpi_put_table(tbl);
/*
* Return immediately if PRMT table is not present or no PRM module found.
*/
if (mc <= 0)
return;
ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype Platform Runtime Mechanism (PRM) is a firmware interface that exposes a set of binary executables that can either be called from the AML interpreter or device drivers by bypassing the AML interpreter. This change implements the AML interpreter path. According to the specification [1], PRM services are listed in an ACPI table called the PRMT. This patch parses module and handler information listed in the PRMT and registers the PlatformRtMechanism OpRegion handler before ACPI tables are loaded. Each service is defined by a 16-byte GUID and called from writing a 26-byte ASL buffer containing the identifier to a FieldUnit object defined inside a PlatformRtMechanism OperationRegion. OperationRegion (PRMR, PlatformRtMechanism, 0, 26) Field (PRMR, BufferAcc, NoLock, Preserve) { PRMF, 208 // Write to this field to invoke the OperationRegion Handler } The 26-byte ASL buffer is defined as the following: Byte Offset Byte Length Description ============================================================= 0 1 PRM OperationRegion handler status 1 8 PRM service status 9 1 PRM command 10 16 PRM handler GUID The ASL caller fills out a 26-byte buffer containing the PRM command and the PRM handler GUID like so: /* Local0 is the PRM data buffer */ Local0 = buffer (26){} /* Create byte fields over the buffer */ CreateByteField (Local0, 0x9, CMD) CreateField (Local0, 0x50, 0x80, GUID) /* Fill in the command and data fields of the data buffer */ CMD = 0 // run command GUID = ToUUID("xxxx-xx-xxx-xxxx") /* * Invoke PRM service with an ID that matches GUID and save the * result. */ Local0 = (\_SB.PRMT.PRMF = Local0) Byte offset 0 - 8 are written by the handler as a status passed back to AML and used by ASL like so: /* Create byte fields over the buffer */ CreateByteField (Local0, 0x0, PSTA) CreateQWordField (Local0, 0x1, USTA) In this ASL code, PSTA contains a status from the OperationRegion and USTA contains a status from the PRM service. The 26-byte buffer is recieved by acpi_platformrt_space_handler. This handler will look at the command value and the handler guid and take the approperiate actions. Command value Action ===================================================================== 0 Run the PRM service indicated by the PRM handler GUID (bytes 10-26) 1 Prevent PRM runtime updates from happening to the service's parent module 2 Allow PRM updates from happening to the service's parent module This patch enables command value 0. Link: https://uefi.org/sites/default/files/resources/Platform%20Runtime%20Mechanism%20-%20with%20legal%20notice.pdf # [1] Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-10 06:41:52 +03:00
pr_info("PRM: found %u modules\n", mc);
status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT,
ACPI_ADR_SPACE_PLATFORM_RT,
&acpi_platformrt_space_handler,
NULL, NULL);
if (ACPI_FAILURE(status))
pr_alert("PRM: OperationRegion handler could not be installed\n");
}