WSL2-Linux-Kernel/net/ethtool/linkmodes.c

449 строки
14 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
#include "netlink.h"
#include "common.h"
#include "bitset.h"
struct linkmodes_req_info {
struct ethnl_req_info base;
};
struct linkmodes_reply_data {
struct ethnl_reply_data base;
struct ethtool_link_ksettings ksettings;
struct ethtool_link_settings *lsettings;
bool peer_empty;
};
#define LINKMODES_REPDATA(__reply_base) \
container_of(__reply_base, struct linkmodes_reply_data, base)
static const struct nla_policy
linkmodes_get_policy[ETHTOOL_A_LINKMODES_MAX + 1] = {
[ETHTOOL_A_LINKMODES_UNSPEC] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_HEADER] = { .type = NLA_NESTED },
[ETHTOOL_A_LINKMODES_AUTONEG] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_OURS] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_PEER] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_SPEED] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_DUPLEX] = { .type = NLA_REJECT },
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
[ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE] = { .type = NLA_REJECT },
};
static int linkmodes_prepare_data(const struct ethnl_req_info *req_base,
struct ethnl_reply_data *reply_base,
struct genl_info *info)
{
struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
struct net_device *dev = reply_base->dev;
int ret;
data->lsettings = &data->ksettings.base;
ret = ethnl_ops_begin(dev);
if (ret < 0)
return ret;
ret = __ethtool_get_link_ksettings(dev, &data->ksettings);
if (ret < 0 && info) {
GENL_SET_ERR_MSG(info, "failed to retrieve link settings");
goto out;
}
data->peer_empty =
bitmap_empty(data->ksettings.link_modes.lp_advertising,
__ETHTOOL_LINK_MODE_MASK_NBITS);
out:
ethnl_ops_complete(dev);
return ret;
}
static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
const struct ethnl_reply_data *reply_base)
{
const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
const struct ethtool_link_ksettings *ksettings = &data->ksettings;
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
const struct ethtool_link_settings *lsettings = &ksettings->base;
bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
int len, ret;
len = nla_total_size(sizeof(u8)) /* LINKMODES_AUTONEG */
+ nla_total_size(sizeof(u32)) /* LINKMODES_SPEED */
+ nla_total_size(sizeof(u8)) /* LINKMODES_DUPLEX */
+ 0;
ret = ethnl_bitset_size(ksettings->link_modes.advertising,
ksettings->link_modes.supported,
__ETHTOOL_LINK_MODE_MASK_NBITS,
link_mode_names, compact);
if (ret < 0)
return ret;
len += ret;
if (!data->peer_empty) {
ret = ethnl_bitset_size(ksettings->link_modes.lp_advertising,
NULL, __ETHTOOL_LINK_MODE_MASK_NBITS,
link_mode_names, compact);
if (ret < 0)
return ret;
len += ret;
}
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
if (lsettings->master_slave_cfg != MASTER_SLAVE_CFG_UNSUPPORTED)
len += nla_total_size(sizeof(u8));
if (lsettings->master_slave_state != MASTER_SLAVE_STATE_UNSUPPORTED)
len += nla_total_size(sizeof(u8));
return len;
}
static int linkmodes_fill_reply(struct sk_buff *skb,
const struct ethnl_req_info *req_base,
const struct ethnl_reply_data *reply_base)
{
const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
const struct ethtool_link_ksettings *ksettings = &data->ksettings;
const struct ethtool_link_settings *lsettings = &ksettings->base;
bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
int ret;
if (nla_put_u8(skb, ETHTOOL_A_LINKMODES_AUTONEG, lsettings->autoneg))
return -EMSGSIZE;
ret = ethnl_put_bitset(skb, ETHTOOL_A_LINKMODES_OURS,
ksettings->link_modes.advertising,
ksettings->link_modes.supported,
__ETHTOOL_LINK_MODE_MASK_NBITS, link_mode_names,
compact);
if (ret < 0)
return -EMSGSIZE;
if (!data->peer_empty) {
ret = ethnl_put_bitset(skb, ETHTOOL_A_LINKMODES_PEER,
ksettings->link_modes.lp_advertising,
NULL, __ETHTOOL_LINK_MODE_MASK_NBITS,
link_mode_names, compact);
if (ret < 0)
return -EMSGSIZE;
}
if (nla_put_u32(skb, ETHTOOL_A_LINKMODES_SPEED, lsettings->speed) ||
nla_put_u8(skb, ETHTOOL_A_LINKMODES_DUPLEX, lsettings->duplex))
return -EMSGSIZE;
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
if (lsettings->master_slave_cfg != MASTER_SLAVE_CFG_UNSUPPORTED &&
nla_put_u8(skb, ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG,
lsettings->master_slave_cfg))
return -EMSGSIZE;
if (lsettings->master_slave_state != MASTER_SLAVE_STATE_UNSUPPORTED &&
nla_put_u8(skb, ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE,
lsettings->master_slave_state))
return -EMSGSIZE;
return 0;
}
const struct ethnl_request_ops ethnl_linkmodes_request_ops = {
.request_cmd = ETHTOOL_MSG_LINKMODES_GET,
.reply_cmd = ETHTOOL_MSG_LINKMODES_GET_REPLY,
.hdr_attr = ETHTOOL_A_LINKMODES_HEADER,
.max_attr = ETHTOOL_A_LINKMODES_MAX,
.req_info_size = sizeof(struct linkmodes_req_info),
.reply_data_size = sizeof(struct linkmodes_reply_data),
.request_policy = linkmodes_get_policy,
.prepare_data = linkmodes_prepare_data,
.reply_size = linkmodes_reply_size,
.fill_reply = linkmodes_fill_reply,
};
/* LINKMODES_SET */
struct link_mode_info {
int speed;
u8 duplex;
};
#define __DEFINE_LINK_MODE_PARAMS(_speed, _type, _duplex) \
[ETHTOOL_LINK_MODE(_speed, _type, _duplex)] = { \
.speed = SPEED_ ## _speed, \
.duplex = __DUPLEX_ ## _duplex \
}
#define __DUPLEX_Half DUPLEX_HALF
#define __DUPLEX_Full DUPLEX_FULL
#define __DEFINE_SPECIAL_MODE_PARAMS(_mode) \
[ETHTOOL_LINK_MODE_ ## _mode ## _BIT] = { \
.speed = SPEED_UNKNOWN, \
.duplex = DUPLEX_UNKNOWN, \
}
static const struct link_mode_info link_mode_params[] = {
__DEFINE_LINK_MODE_PARAMS(10, T, Half),
__DEFINE_LINK_MODE_PARAMS(10, T, Full),
__DEFINE_LINK_MODE_PARAMS(100, T, Half),
__DEFINE_LINK_MODE_PARAMS(100, T, Full),
__DEFINE_LINK_MODE_PARAMS(1000, T, Half),
__DEFINE_LINK_MODE_PARAMS(1000, T, Full),
__DEFINE_SPECIAL_MODE_PARAMS(Autoneg),
__DEFINE_SPECIAL_MODE_PARAMS(TP),
__DEFINE_SPECIAL_MODE_PARAMS(AUI),
__DEFINE_SPECIAL_MODE_PARAMS(MII),
__DEFINE_SPECIAL_MODE_PARAMS(FIBRE),
__DEFINE_SPECIAL_MODE_PARAMS(BNC),
__DEFINE_LINK_MODE_PARAMS(10000, T, Full),
__DEFINE_SPECIAL_MODE_PARAMS(Pause),
__DEFINE_SPECIAL_MODE_PARAMS(Asym_Pause),
__DEFINE_LINK_MODE_PARAMS(2500, X, Full),
__DEFINE_SPECIAL_MODE_PARAMS(Backplane),
__DEFINE_LINK_MODE_PARAMS(1000, KX, Full),
__DEFINE_LINK_MODE_PARAMS(10000, KX4, Full),
__DEFINE_LINK_MODE_PARAMS(10000, KR, Full),
[ETHTOOL_LINK_MODE_10000baseR_FEC_BIT] = {
.speed = SPEED_10000,
.duplex = DUPLEX_FULL,
},
__DEFINE_LINK_MODE_PARAMS(20000, MLD2, Full),
__DEFINE_LINK_MODE_PARAMS(20000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(40000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(40000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(40000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(40000, LR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(56000, LR4, Full),
__DEFINE_LINK_MODE_PARAMS(25000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(25000, KR, Full),
__DEFINE_LINK_MODE_PARAMS(25000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, CR2, Full),
__DEFINE_LINK_MODE_PARAMS(50000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(100000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(100000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(100000, LR4_ER4, Full),
__DEFINE_LINK_MODE_PARAMS(50000, SR2, Full),
__DEFINE_LINK_MODE_PARAMS(1000, X, Full),
__DEFINE_LINK_MODE_PARAMS(10000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(10000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(10000, LR, Full),
__DEFINE_LINK_MODE_PARAMS(10000, LRM, Full),
__DEFINE_LINK_MODE_PARAMS(10000, ER, Full),
__DEFINE_LINK_MODE_PARAMS(2500, T, Full),
__DEFINE_LINK_MODE_PARAMS(5000, T, Full),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_NONE),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_RS),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_BASER),
__DEFINE_LINK_MODE_PARAMS(50000, KR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, LR_ER_FR, Full),
__DEFINE_LINK_MODE_PARAMS(50000, DR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, SR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, CR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, LR2_ER2_FR2, Full),
__DEFINE_LINK_MODE_PARAMS(100000, DR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, LR4_ER4_FR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, DR4, Full),
__DEFINE_LINK_MODE_PARAMS(200000, CR4, Full),
__DEFINE_LINK_MODE_PARAMS(100, T1, Full),
__DEFINE_LINK_MODE_PARAMS(1000, T1, Full),
__DEFINE_LINK_MODE_PARAMS(400000, KR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, SR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, LR8_ER8_FR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, DR8, Full),
__DEFINE_LINK_MODE_PARAMS(400000, CR8, Full),
__DEFINE_SPECIAL_MODE_PARAMS(FEC_LLRS),
__DEFINE_LINK_MODE_PARAMS(100000, KR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, SR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, LR_ER_FR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, DR, Full),
__DEFINE_LINK_MODE_PARAMS(100000, CR, Full),
__DEFINE_LINK_MODE_PARAMS(200000, KR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, SR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, LR2_ER2_FR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, DR2, Full),
__DEFINE_LINK_MODE_PARAMS(200000, CR2, Full),
__DEFINE_LINK_MODE_PARAMS(400000, KR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, SR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, LR4_ER4_FR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, DR4, Full),
__DEFINE_LINK_MODE_PARAMS(400000, CR4, Full),
};
static const struct nla_policy
linkmodes_set_policy[ETHTOOL_A_LINKMODES_MAX + 1] = {
[ETHTOOL_A_LINKMODES_UNSPEC] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_HEADER] = { .type = NLA_NESTED },
[ETHTOOL_A_LINKMODES_AUTONEG] = { .type = NLA_U8 },
[ETHTOOL_A_LINKMODES_OURS] = { .type = NLA_NESTED },
[ETHTOOL_A_LINKMODES_PEER] = { .type = NLA_REJECT },
[ETHTOOL_A_LINKMODES_SPEED] = { .type = NLA_U32 },
[ETHTOOL_A_LINKMODES_DUPLEX] = { .type = NLA_U8 },
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
[ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG] = { .type = NLA_U8 },
[ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE] = { .type = NLA_REJECT },
};
/* Set advertised link modes to all supported modes matching requested speed
* and duplex values. Called when autonegotiation is on, speed or duplex is
* requested but no link mode change. This is done in userspace with ioctl()
* interface, move it into kernel for netlink.
* Returns true if advertised modes bitmap was modified.
*/
static bool ethnl_auto_linkmodes(struct ethtool_link_ksettings *ksettings,
bool req_speed, bool req_duplex)
{
unsigned long *advertising = ksettings->link_modes.advertising;
unsigned long *supported = ksettings->link_modes.supported;
DECLARE_BITMAP(old_adv, __ETHTOOL_LINK_MODE_MASK_NBITS);
unsigned int i;
BUILD_BUG_ON(ARRAY_SIZE(link_mode_params) !=
__ETHTOOL_LINK_MODE_MASK_NBITS);
bitmap_copy(old_adv, advertising, __ETHTOOL_LINK_MODE_MASK_NBITS);
for (i = 0; i < __ETHTOOL_LINK_MODE_MASK_NBITS; i++) {
const struct link_mode_info *info = &link_mode_params[i];
if (info->speed == SPEED_UNKNOWN)
continue;
if (test_bit(i, supported) &&
(!req_speed || info->speed == ksettings->base.speed) &&
(!req_duplex || info->duplex == ksettings->base.duplex))
set_bit(i, advertising);
else
clear_bit(i, advertising);
}
return !bitmap_equal(old_adv, advertising,
__ETHTOOL_LINK_MODE_MASK_NBITS);
}
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
static bool ethnl_validate_master_slave_cfg(u8 cfg)
{
switch (cfg) {
case MASTER_SLAVE_CFG_MASTER_PREFERRED:
case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
case MASTER_SLAVE_CFG_MASTER_FORCE:
case MASTER_SLAVE_CFG_SLAVE_FORCE:
return true;
}
return false;
}
static int ethnl_update_linkmodes(struct genl_info *info, struct nlattr **tb,
struct ethtool_link_ksettings *ksettings,
bool *mod)
{
struct ethtool_link_settings *lsettings = &ksettings->base;
bool req_speed, req_duplex;
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
const struct nlattr *master_slave_cfg;
int ret;
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
master_slave_cfg = tb[ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG];
if (master_slave_cfg) {
u8 cfg = nla_get_u8(master_slave_cfg);
if (lsettings->master_slave_cfg == MASTER_SLAVE_CFG_UNSUPPORTED) {
NL_SET_ERR_MSG_ATTR(info->extack, master_slave_cfg,
"master/slave configuration not supported by device");
return -EOPNOTSUPP;
}
if (!ethnl_validate_master_slave_cfg(cfg)) {
NL_SET_ERR_MSG_ATTR(info->extack, master_slave_cfg,
"master/slave value is invalid");
return -EOPNOTSUPP;
}
}
*mod = false;
req_speed = tb[ETHTOOL_A_LINKMODES_SPEED];
req_duplex = tb[ETHTOOL_A_LINKMODES_DUPLEX];
ethnl_update_u8(&lsettings->autoneg, tb[ETHTOOL_A_LINKMODES_AUTONEG],
mod);
ret = ethnl_update_bitset(ksettings->link_modes.advertising,
__ETHTOOL_LINK_MODE_MASK_NBITS,
tb[ETHTOOL_A_LINKMODES_OURS], link_mode_names,
info->extack, mod);
if (ret < 0)
return ret;
ethnl_update_u32(&lsettings->speed, tb[ETHTOOL_A_LINKMODES_SPEED],
mod);
ethnl_update_u8(&lsettings->duplex, tb[ETHTOOL_A_LINKMODES_DUPLEX],
mod);
ethtool: provide UAPI for PHY master/slave configuration. This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of auto-negotiation support, we needed to be able to configure the MASTER-SLAVE role of the port manually or from an application in user space. The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to force MASTER or SLAVE role. See IEEE 802.3-2018: 22.2.4.3.7 MASTER-SLAVE control register (Register 9) 22.2.4.3.8 MASTER-SLAVE status register (Register 10) 40.5.2 MASTER-SLAVE configuration resolution 45.2.1.185.1 MASTER-SLAVE config value (1.2100.14) 45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32) The MASTER-SLAVE role affects the clock configuration: ------------------------------------------------------------------------------- When the PHY is configured as MASTER, the PMA Transmit function shall source TX_TCLK from a local clock source. When configured as SLAVE, the PMA Transmit function shall source TX_TCLK from the clock recovered from data stream provided by MASTER. iMX6Q KSZ9031 XXX ------\ /-----------\ /------------\ | | | | | MAC |<----RGMII----->| PHY Slave |<------>| PHY Master | |<--- 125 MHz ---+-<------/ | | \ | ------/ \-----------/ \------------/ ^ \-TX_TCLK ------------------------------------------------------------------------------- Since some clock or link related issues are only reproducible in a specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial to provide generic (not 100BASE-T1 specific) interface to the user space for configuration flexibility and trouble shooting. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-05 09:35:05 +03:00
ethnl_update_u8(&lsettings->master_slave_cfg, master_slave_cfg, mod);
if (!tb[ETHTOOL_A_LINKMODES_OURS] && lsettings->autoneg &&
(req_speed || req_duplex) &&
ethnl_auto_linkmodes(ksettings, req_speed, req_duplex))
*mod = true;
return 0;
}
int ethnl_set_linkmodes(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *tb[ETHTOOL_A_LINKMODES_MAX + 1];
struct ethtool_link_ksettings ksettings = {};
struct ethnl_req_info req_info = {};
struct net_device *dev;
bool mod = false;
int ret;
ret = nlmsg_parse(info->nlhdr, GENL_HDRLEN, tb,
ETHTOOL_A_LINKMODES_MAX, linkmodes_set_policy,
info->extack);
if (ret < 0)
return ret;
ret = ethnl_parse_header_dev_get(&req_info,
tb[ETHTOOL_A_LINKMODES_HEADER],
genl_info_net(info), info->extack,
true);
if (ret < 0)
return ret;
dev = req_info.dev;
ret = -EOPNOTSUPP;
if (!dev->ethtool_ops->get_link_ksettings ||
!dev->ethtool_ops->set_link_ksettings)
goto out_dev;
rtnl_lock();
ret = ethnl_ops_begin(dev);
if (ret < 0)
goto out_rtnl;
ret = __ethtool_get_link_ksettings(dev, &ksettings);
if (ret < 0) {
if (info)
GENL_SET_ERR_MSG(info, "failed to retrieve link settings");
goto out_ops;
}
ret = ethnl_update_linkmodes(info, tb, &ksettings, &mod);
if (ret < 0)
goto out_ops;
if (mod) {
ret = dev->ethtool_ops->set_link_ksettings(dev, &ksettings);
if (ret < 0)
GENL_SET_ERR_MSG(info, "link settings update failed");
else
ethtool_notify(dev, ETHTOOL_MSG_LINKMODES_NTF, NULL);
}
out_ops:
ethnl_ops_complete(dev);
out_rtnl:
rtnl_unlock();
out_dev:
dev_put(dev);
return ret;
}