microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/kernel/trace/ring_buffer.c

5010 строки
130 KiB
C
Исходник Обычный вид История

tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/*
* Generic ring buffer
*
* Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com>
*/
tracing: Rename ftrace_event.h to trace_events.h The term "ftrace" is really the infrastructure of the function hooks, and not the trace events. Rename ftrace_event.h to trace_events.h to represent the trace_event infrastructure and decouple the term ftrace from it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-29 21:36:05 +03:00
#include <linux/trace_events.h>
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#include <linux/ring_buffer.h>
tracing: implement trace_clock_*() APIs Impact: implement new tracing timestamp APIs Add three trace clock variants, with differing scalability/precision tradeoffs: - local: CPU-local trace clock - medium: scalable global clock with some jitter - global: globally monotonic, serialized clock Make the ring-buffer use the local trace clock internally. Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 20:47:11 +03:00
#include <linux/trace_clock.h>
ring-buffer: Remove trace.h from ring_buffer.c ring_buffer.c use to require declarations from trace.h, but these have moved to the generic header files. There's nothing in trace.h that ring_buffer.c requires. There's some headers that trace.h included that ring_buffer.c needs, but it's best that it includes them directly, and not include trace.h. Also, some things may use ring_buffer.c without having tracing configured. This removes the dependency that may come in the future. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-23 01:58:30 +04:00
#include <linux/trace_seq.h>
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#include <linux/spinlock.h>
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
#include <linux/irq_work.h>
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#include <linux/uaccess.h>
ring-buffer: use generic version of in_nmi Impact: clean up Now that a generic in_nmi is available, this patch removes the special code in the ring_buffer and implements the in_nmi generic version instead. With this change, I was also able to rename the "arch_ftrace_nmi_enter" back to "ftrace_nmi_enter" and remove the code from the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-06 09:45:16 +03:00
#include <linux/hardirq.h>
ring-buffer: Add ring buffer startup selftest When testing my large changes to the ftrace system, there was a bug that looked like the ring buffer was dropping events. I wrote up a quick integrity checker of the ring buffer to see if it was. Although the bug ended up being something stupid I did in ftrace, and had nothing to do with the ring buffer, I figured if I spent the time to write up this test, I might as well include it in the kernel. I cleaned it up a bit, as the original version was rather ugly. Not saying this version is pretty, but it's a beauty queen compared to what I original wrote. To enable the start up test, set CONFIG_RING_BUFFER_STARTUP_TEST. Note, it runs for 10 seconds, so it will slow your boot time by at least 10 more seconds. What it does is documented in both the comments and the Kconfig help. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 19:32:53 +04:00
#include <linux/kthread.h> /* for self test */
trace: annotate bitfields in struct ring_buffer_event This gets rid of a heap of false-positive warnings from the tracer code due to the use of bitfields. [rebased for mainline inclusion] Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
2009-02-28 10:29:44 +03:00
#include <linux/kmemcheck.h>
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/mutex.h>
ring-buffer: Add ring buffer startup selftest When testing my large changes to the ftrace system, there was a bug that looked like the ring buffer was dropping events. I wrote up a quick integrity checker of the ring buffer to see if it was. Although the bug ended up being something stupid I did in ftrace, and had nothing to do with the ring buffer, I figured if I spent the time to write up this test, I might as well include it in the kernel. I cleaned it up a bit, as the original version was rather ugly. Not saying this version is pretty, but it's a beauty queen compared to what I original wrote. To enable the start up test, set CONFIG_RING_BUFFER_STARTUP_TEST. Note, it runs for 10 seconds, so it will slow your boot time by at least 10 more seconds. What it does is documented in both the comments and the Kconfig help. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 19:32:53 +04:00
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/list.h>
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
#include <linux/cpu.h>
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
local_t: Move local.h include to ringbuffer.c and ring_buffer_benchmark.c ringbuffer*.c are the last users of local.h. Remove the include from modules.h and add it to ringbuffer files. Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2010-01-05 09:34:50 +03:00
#include <asm/local.h>
ftrace: insert in the ftrace_preempt_disable()/enable() functions Impact: use new, consolidated APIs in ftrace plugins This patch replaces the schedule safe preempt disable code with the ftrace_preempt_disable() and ftrace_preempt_enable() safe functions. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-04 07:15:56 +03:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
static void update_pages_handler(struct work_struct *work);
tracing/events/ring-buffer: expose format of ring buffer headers to users Currently, every thing needed to read the binary output from the ring buffers is available, with the exception of the way the ring buffers handles itself internally. This patch creates two special files in the debugfs/tracing/events directory: # cat /debug/tracing/events/header_page field: u64 timestamp; offset:0; size:8; field: local_t commit; offset:8; size:8; field: char data; offset:16; size:4080; # cat /debug/tracing/events/header_event type : 2 bits len : 3 bits time_delta : 27 bits array : 32 bits padding : type == 0 time_extend : type == 1 data : type == 3 This is to allow a userspace app to see if the ring buffer format changes or not. [ Impact: allow userspace apps to know of ringbuffer format changes ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:53:47 +04:00
/*
* The ring buffer header is special. We must manually up keep it.
*/
int ring_buffer_print_entry_header(struct trace_seq *s)
{
ring-buffer: Remove check of trace_seq_{puts,printf}() return values Remove checking the return value of all trace_seq_puts(). It was wrong anyway as only the last return value mattered. But as the trace_seq_puts() is going to be a void function in the future, we should not be checking the return value of it anyway. Just return !trace_seq_has_overflowed() instead. Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 19:49:00 +03:00
trace_seq_puts(s, "# compressed entry header\n");
trace_seq_puts(s, "\ttype_len : 5 bits\n");
trace_seq_puts(s, "\ttime_delta : 27 bits\n");
trace_seq_puts(s, "\tarray : 32 bits\n");
trace_seq_putc(s, '\n');
trace_seq_printf(s, "\tpadding : type == %d\n",
RINGBUF_TYPE_PADDING);
trace_seq_printf(s, "\ttime_extend : type == %d\n",
RINGBUF_TYPE_TIME_EXTEND);
trace_seq_printf(s, "\tdata max type_len == %d\n",
RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
return !trace_seq_has_overflowed(s);
tracing/events/ring-buffer: expose format of ring buffer headers to users Currently, every thing needed to read the binary output from the ring buffers is available, with the exception of the way the ring buffers handles itself internally. This patch creates two special files in the debugfs/tracing/events directory: # cat /debug/tracing/events/header_page field: u64 timestamp; offset:0; size:8; field: local_t commit; offset:8; size:8; field: char data; offset:16; size:4080; # cat /debug/tracing/events/header_event type : 2 bits len : 3 bits time_delta : 27 bits array : 32 bits padding : type == 0 time_extend : type == 1 data : type == 3 This is to allow a userspace app to see if the ring buffer format changes or not. [ Impact: allow userspace apps to know of ringbuffer format changes ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:53:47 +04:00
}
ring-buffer: document reader page design In a private email conversation I explained how the ring buffer page worked by using silly ASCII art. Ingo suggested that I add that to the comments of the code. Here it is. Requested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-13 05:24:17 +03:00
/*
* The ring buffer is made up of a list of pages. A separate list of pages is
* allocated for each CPU. A writer may only write to a buffer that is
* associated with the CPU it is currently executing on. A reader may read
* from any per cpu buffer.
*
* The reader is special. For each per cpu buffer, the reader has its own
* reader page. When a reader has read the entire reader page, this reader
* page is swapped with another page in the ring buffer.
*
* Now, as long as the writer is off the reader page, the reader can do what
* ever it wants with that page. The writer will never write to that page
* again (as long as it is out of the ring buffer).
*
* Here's some silly ASCII art.
*
* +------+
* |reader| RING BUFFER
* |page |
* +------+ +---+ +---+ +---+
* | |-->| |-->| |
* +---+ +---+ +---+
* ^ |
* | |
* +---------------+
*
*
* +------+
* |reader| RING BUFFER
* |page |------------------v
* +------+ +---+ +---+ +---+
* | |-->| |-->| |
* +---+ +---+ +---+
* ^ |
* | |
* +---------------+
*
*
* +------+
* |reader| RING BUFFER
* |page |------------------v
* +------+ +---+ +---+ +---+
* ^ | |-->| |-->| |
* | +---+ +---+ +---+
* | |
* | |
* +------------------------------+
*
*
* +------+
* |buffer| RING BUFFER
* |page |------------------v
* +------+ +---+ +---+ +---+
* ^ | | | |-->| |
* | New +---+ +---+ +---+
* | Reader------^ |
* | page |
* +------------------------------+
*
*
* After we make this swap, the reader can hand this page off to the splice
* code and be done with it. It can even allocate a new page if it needs to
* and swap that into the ring buffer.
*
* We will be using cmpxchg soon to make all this lockless.
*
*/
tracing/ring-buffer: Only have tracing_on disable tracing buffers As the ring-buffer code is being used by other facilities in the kernel, having tracing_on file disable *all* buffers is not a desired affect. It should only disable the ftrace buffers that are being used. Move the code into the trace.c file and use the buffer disabling for tracing_on() and tracing_off(). This way only the ftrace buffers will be affected by them and other kernel utilities will not be confused to why their output suddenly stopped. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-23 00:50:28 +04:00
/* Used for individual buffers (after the counter) */
#define RB_BUFFER_OFF (1 << 20)
ring-buffer: buffer record on/off switch Impact: enable/disable ring buffer recording API added Several kernel developers have requested that there be a way to stop recording into the ring buffers with a simple switch that can also be enabled from userspace. This patch addes a new kernel API to the ring buffers called: tracing_on() tracing_off() When tracing_off() is called, all ring buffers will not be able to record into their buffers. tracing_on() will enable the ring buffers again. These two act like an on/off switch. That is, there is no counting of the number of times tracing_off or tracing_on has been called. A new file is added to the debugfs/tracing directory called tracing_on This allows for userspace applications to also flip the switch. echo 0 > debugfs/tracing/tracing_on disables the tracing. echo 1 > /debugfs/tracing/tracing_on enables it. Note, this does not disable or enable any tracers. It only sets or clears a flag that needs to be set in order for the ring buffers to write to their buffers. It is a global flag, and affects all ring buffers. The buffers start out with tracing_on enabled. There are now three flags that control recording into the buffers: tracing_on: which affects all ring buffer tracers. buffer->record_disabled: which affects an allocated buffer, which may be set if an anomaly is detected, and tracing is disabled. cpu_buffer->record_disabled: which is set by tracing_stop() or if an anomaly is detected. tracing_start can not reenable this if an anomaly occurred. The userspace debugfs/tracing/tracing_enabled is implemented with tracing_stop() but the user space code can not enable it if the kernel called tracing_stop(). Userspace can enable the tracing_on even if the kernel disabled it. It is just a switch used to stop tracing if a condition was hit. tracing_on is not for protecting critical areas in the kernel nor is it for stopping tracing if an anomaly occurred. This is because userspace can reenable it at any time. Side effect: With this patch, I discovered a dead variable in ftrace.c called tracing_on. This patch removes it. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2008-11-11 23:01:42 +03:00
tracing/ring-buffer: Only have tracing_on disable tracing buffers As the ring-buffer code is being used by other facilities in the kernel, having tracing_on file disable *all* buffers is not a desired affect. It should only disable the ftrace buffers that are being used. Move the code into the trace.c file and use the buffer disabling for tracing_on() and tracing_off(). This way only the ftrace buffers will be affected by them and other kernel utilities will not be confused to why their output suddenly stopped. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-23 00:50:28 +04:00
#define BUF_PAGE_HDR_SIZE offsetof(struct buffer_data_page, data)
ring-buffer: add tracing_off_permanent Impact: feature to permanently disable ring buffer This patch adds a API to the ring buffer code that will permanently disable the ring buffer from ever recording. This should only be called when some serious anomaly is detected, and the system may be in an unstable state. When that happens, shutting down the recording to the ring buffers may be appropriate. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-21 20:41:55 +03:00
ring-buffer: replace sizeof of event header with offsetof Impact: fix to possible alignment problems on some archs. Some arch compilers include an NULL char array in the sizeof field. Since the ring_buffer_event type includes one of these, it is better to use the "offsetof" instead, to avoid strange bugs on these archs. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 21:53:07 +03:00
#define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array))
kernel/trace/ring_buffer.c: use DIV_ROUND_UP Instead of open-coding it. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 23:27:09 +03:00
#define RB_ALIGNMENT 4U
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
#define RB_MAX_SMALL_DATA (RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
#define RB_EVNT_MIN_SIZE 8U /* two 32bit words */
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
trace/ring_buffer: handle 64bit aligned structs Some 32 bit architectures require 64 bit values to be aligned (for example Meta which has 64 bit read/write instructions). These require 8 byte alignment of event data too, so use !CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT || CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align buffer_data_page::data accordingly. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
2012-05-30 15:11:19 +04:00
#ifndef CONFIG_HAVE_64BIT_ALIGNED_ACCESS
ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align The ring buffer uses 4 byte alignment while recording events into the buffer, even on 64bit machines. This saves space when there are lots of events being recorded at 4 byte boundaries. The ring buffer has a zero copy method to write into the buffer, with the reserving of space and then committing it. This may cause problems when writing an 8 byte word into a 4 byte alignment (not 8). For x86 and PPC this is not an issue, but on some architectures this would cause an out-of-alignment exception. This patch uses CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to determine if it is OK to use 4 byte alignments on 64 bit machines. If it is not, it forces the ring buffer event header to be 8 bytes and not 4, and will align the length of the data to be 8 byte aligned. This keeps the data payload at 8 byte alignments and will allow these machines to run without issue. The trick to this is that the header can be either 4 bytes or 8 bytes depending on the length of the data payload. The 4 byte header has a length field that supports up to 112 bytes. If the length of the data is more than 112, the length field is set to zero, and the actual length is stored in the next 4 bytes after the header. When CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set, the code forces zero in the 4 byte header forcing the length to be stored in the 4 byte array, even with a small data load. It also forces the length of the data load to be 8 byte aligned. The combination of these two guarantee that the data is always at 8 byte alignment. Tested-by: Frederic Weisbecker <fweisbec@gmail.com> (on sparc64) Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-19 00:54:19 +03:00
# define RB_FORCE_8BYTE_ALIGNMENT 0
# define RB_ARCH_ALIGNMENT RB_ALIGNMENT
#else
# define RB_FORCE_8BYTE_ALIGNMENT 1
# define RB_ARCH_ALIGNMENT 8U
#endif
trace/ring_buffer: handle 64bit aligned structs Some 32 bit architectures require 64 bit values to be aligned (for example Meta which has 64 bit read/write instructions). These require 8 byte alignment of event data too, so use !CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT || CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align buffer_data_page::data accordingly. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
2012-05-30 15:11:19 +04:00
#define RB_ALIGN_DATA __aligned(RB_ARCH_ALIGNMENT)
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
/* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */
#define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
enum {
RB_LEN_TIME_EXTEND = 8,
RB_LEN_TIME_STAMP = 16,
};
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
#define skip_time_extend(event) \
((struct ring_buffer_event *)((char *)event + RB_LEN_TIME_EXTEND))
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
static inline int rb_null_event(struct ring_buffer_event *event)
{
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
return event->type_len == RINGBUF_TYPE_PADDING && !event->time_delta;
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
}
static void rb_event_set_padding(struct ring_buffer_event *event)
{
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
/* padding has a NULL time_delta */
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
event->type_len = RINGBUF_TYPE_PADDING;
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
event->time_delta = 0;
}
kernel/trace/ring_buffer.c: reduce inlining text data bss dec hex filename before: 11320 228 8 11556 2d24 kernel/trace/ring_buffer.o after: 10592 228 8 10828 2a4c kernel/trace/ring_buffer.o Also: free_page(0) is legal. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 23:27:09 +03:00
static unsigned
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
rb_event_data_length(struct ring_buffer_event *event)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
unsigned length;
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
if (event->type_len)
length = event->type_len * RB_ALIGNMENT;
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
else
length = event->array[0];
return length + RB_EVNT_HDR_SIZE;
}
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
/*
* Return the length of the given event. Will return
* the length of the time extend if the event is a
* time extend.
*/
static inline unsigned
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
rb_event_length(struct ring_buffer_event *event)
{
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
switch (event->type_len) {
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_PADDING:
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
if (rb_null_event(event))
/* undefined */
return -1;
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
return event->array[0] + RB_EVNT_HDR_SIZE;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_TIME_EXTEND:
return RB_LEN_TIME_EXTEND;
case RINGBUF_TYPE_TIME_STAMP:
return RB_LEN_TIME_STAMP;
case RINGBUF_TYPE_DATA:
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
return rb_event_data_length(event);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
default:
BUG();
}
/* not hit */
return 0;
}
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
/*
* Return total length of time extend and data,
* or just the event length for all other events.
*/
static inline unsigned
rb_event_ts_length(struct ring_buffer_event *event)
{
unsigned len = 0;
if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) {
/* time extends include the data event after it */
len = RB_LEN_TIME_EXTEND;
event = skip_time_extend(event);
}
return len + rb_event_length(event);
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_event_length - return the length of the event
* @event: the event to get the length of
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
*
* Returns the size of the data load of a data event.
* If the event is something other than a data event, it
* returns the size of the event itself. With the exception
* of a TIME EXTEND, where it still returns the size of the
* data load of the data event after it.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
unsigned ring_buffer_event_length(struct ring_buffer_event *event)
{
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
unsigned length;
if (event->type_len == RINGBUF_TYPE_TIME_EXTEND)
event = skip_time_extend(event);
length = rb_event_length(event);
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
ring_buffer: fix ring_buffer_event_length() Function ring_buffer_event_length() provides an interface to detect the length of data stored in an entry. However, the length contains offsets depending on the internal usage. This makes it unusable. This patch fixes this and now ring_buffer_event_length() returns the alligned length that has been used in ring_buffer_lock_reserve(). Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-01-07 17:32:11 +03:00
return length;
length -= RB_EVNT_HDR_SIZE;
if (length > RB_MAX_SMALL_DATA + sizeof(event->array[0]))
length -= sizeof(event->array[0]);
return length;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_event_length);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/* inline for ring buffer fast paths */
kernel/trace/ring_buffer.c: reduce inlining text data bss dec hex filename before: 11320 228 8 11556 2d24 kernel/trace/ring_buffer.o after: 10592 228 8 10828 2a4c kernel/trace/ring_buffer.o Also: free_page(0) is legal. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 23:27:09 +03:00
static void *
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
rb_event_data(struct ring_buffer_event *event)
{
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
if (event->type_len == RINGBUF_TYPE_TIME_EXTEND)
event = skip_time_extend(event);
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
BUG_ON(event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/* If length is in len field, then array[0] has the data */
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
if (event->type_len)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return (void *)&event->array[0];
/* Otherwise length is in array[0] and array[1] has the data */
return (void *)&event->array[1];
}
/**
* ring_buffer_event_data - return the data of the event
* @event: the event to get the data from
*/
void *ring_buffer_event_data(struct ring_buffer_event *event)
{
return rb_event_data(event);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_event_data);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#define for_each_buffer_cpu(buffer, cpu) \
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
for_each_cpu(cpu, buffer->cpumask)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
#define TS_SHIFT 27
#define TS_MASK ((1ULL << TS_SHIFT) - 1)
#define TS_DELTA_TEST (~TS_MASK)
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
/* Flag when events were overwritten */
#define RB_MISSED_EVENTS (1 << 31)
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
/* Missed count stored at end */
#define RB_MISSED_STORED (1 << 30)
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
struct buffer_data_page {
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
u64 time_stamp; /* page time stamp */
tracing: fix typos in comments Impact: clean up. Fix typos in the comments. Signed-off-by: Wenji Huang <wenji.huang@oracle.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-10 09:03:18 +03:00
local_t commit; /* write committed index */
trace/ring_buffer: handle 64bit aligned structs Some 32 bit architectures require 64 bit values to be aligned (for example Meta which has 64 bit read/write instructions). These require 8 byte alignment of event data too, so use !CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT || CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align buffer_data_page::data accordingly. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
2012-05-30 15:11:19 +04:00
unsigned char data[] RB_ALIGN_DATA; /* data of buffer page */
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
};
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* Note, the buffer_page list must be first. The buffer pages
* are allocated in cache lines, which means that each buffer
* page will be at the beginning of a cache line, and thus
* the least significant bits will be zero. We use this to
* add flags in the list struct pointers, to make the ring buffer
* lockless.
*/
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
struct buffer_page {
ring-buffer: record page entries in buffer page descriptor Currently, when the ring buffer writer overflows the buffer and must write over non consumed data, we increment the overrun counter by reading the entries on the page we are about to overwrite. This reads the entries one by one. This is not very effecient. This patch adds another entry counter into each buffer page descriptor that keeps track of the number of entries on the page. Now on overwrite, the overrun counter simply needs to add the number of entries that is on the page it is about to overwrite. [ Impact: speed up of ring buffer in overwrite mode ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 02:44:45 +04:00
struct list_head list; /* list of buffer pages */
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
local_t write; /* index for next write */
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
unsigned read; /* index for next read */
ring-buffer: record page entries in buffer page descriptor Currently, when the ring buffer writer overflows the buffer and must write over non consumed data, we increment the overrun counter by reading the entries on the page we are about to overwrite. This reads the entries one by one. This is not very effecient. This patch adds another entry counter into each buffer page descriptor that keeps track of the number of entries on the page. Now on overwrite, the overrun counter simply needs to add the number of entries that is on the page it is about to overwrite. [ Impact: speed up of ring buffer in overwrite mode ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 02:44:45 +04:00
local_t entries; /* entries on this page */
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
unsigned long real_end; /* real end of data */
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
struct buffer_data_page *page; /* Actual data page */
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
};
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* The buffer page counters, write and entries, must be reset
* atomically when crossing page boundaries. To synchronize this
* update, two counters are inserted into the number. One is
* the actual counter for the write position or count on the page.
*
* The other is a counter of updaters. Before an update happens
* the update partition of the counter is incremented. This will
* allow the updater to update the counter atomically.
*
* The counter is 20 bits, and the state data is 12.
*/
#define RB_WRITE_MASK 0xfffff
#define RB_WRITE_INTCNT (1 << 20)
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
static void rb_init_page(struct buffer_data_page *bpage)
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
{
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
local_set(&bpage->commit, 0);
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
}
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
/**
* ring_buffer_page_len - the size of data on the page.
* @page: The page to read
*
* Returns the amount of data on the page, including buffer page header.
*/
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
size_t ring_buffer_page_len(void *page)
{
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
return local_read(&((struct buffer_data_page *)page)->commit)
+ BUF_PAGE_HDR_SIZE;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
}
ring_buffer: reset buffer page when freeing Mathieu Desnoyers pointed out that the freeing of the page frame needs to be reset otherwise we might trigger BUG_ON in the page free code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:40 +04:00
/*
* Also stolen from mm/slob.c. Thanks to Mathieu Desnoyers for pointing
* this issue out.
*/
kernel/trace/ring_buffer.c: reduce inlining text data bss dec hex filename before: 11320 228 8 11556 2d24 kernel/trace/ring_buffer.o after: 10592 228 8 10828 2a4c kernel/trace/ring_buffer.o Also: free_page(0) is legal. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 23:27:09 +03:00
static void free_buffer_page(struct buffer_page *bpage)
ring_buffer: reset buffer page when freeing Mathieu Desnoyers pointed out that the freeing of the page frame needs to be reset otherwise we might trigger BUG_ON in the page free code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:40 +04:00
{
kernel/trace/ring_buffer.c: reduce inlining text data bss dec hex filename before: 11320 228 8 11556 2d24 kernel/trace/ring_buffer.o after: 10592 228 8 10828 2a4c kernel/trace/ring_buffer.o Also: free_page(0) is legal. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 23:27:09 +03:00
free_page((unsigned long)bpage->page);
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
kfree(bpage);
ring_buffer: reset buffer page when freeing Mathieu Desnoyers pointed out that the freeing of the page frame needs to be reset otherwise we might trigger BUG_ON in the page free code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:40 +04:00
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/*
* We need to fit the time_stamp delta into 27 bits.
*/
static inline int test_time_stamp(u64 delta)
{
if (delta & TS_DELTA_TEST)
return 1;
return 0;
}
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
#define BUF_PAGE_SIZE (PAGE_SIZE - BUF_PAGE_HDR_SIZE)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: move calculation of event length The event length is calculated and passed in to rb_reserve_next_event in two different locations. Having rb_reserve_next_event do the calculations directly makes only one location to do the change and causes the calculation to be inlined by gcc. Before: text data bss dec hex filename 16538 24 12 16574 40be kernel/trace/ring_buffer.o After: text data bss dec hex filename 16490 24 12 16526 408e kernel/trace/ring_buffer.o [ Impact: smaller more efficient code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 22:42:53 +04:00
/* Max payload is BUF_PAGE_SIZE - header (8bytes) */
#define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2))
tracing/events/ring-buffer: expose format of ring buffer headers to users Currently, every thing needed to read the binary output from the ring buffers is available, with the exception of the way the ring buffers handles itself internally. This patch creates two special files in the debugfs/tracing/events directory: # cat /debug/tracing/events/header_page field: u64 timestamp; offset:0; size:8; field: local_t commit; offset:8; size:8; field: char data; offset:16; size:4080; # cat /debug/tracing/events/header_event type : 2 bits len : 3 bits time_delta : 27 bits array : 32 bits padding : type == 0 time_extend : type == 1 data : type == 3 This is to allow a userspace app to see if the ring buffer format changes or not. [ Impact: allow userspace apps to know of ringbuffer format changes ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:53:47 +04:00
int ring_buffer_print_page_header(struct trace_seq *s)
{
struct buffer_data_page field;
ring-buffer: Remove check of trace_seq_{puts,printf}() return values Remove checking the return value of all trace_seq_puts(). It was wrong anyway as only the last return value mattered. But as the trace_seq_puts() is going to be a void function in the future, we should not be checking the return value of it anyway. Just return !trace_seq_has_overflowed() instead. Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 19:49:00 +03:00
trace_seq_printf(s, "\tfield: u64 timestamp;\t"
"offset:0;\tsize:%u;\tsigned:%u;\n",
(unsigned int)sizeof(field.time_stamp),
(unsigned int)is_signed_type(u64));
trace_seq_printf(s, "\tfield: local_t commit;\t"
"offset:%u;\tsize:%u;\tsigned:%u;\n",
(unsigned int)offsetof(typeof(field), commit),
(unsigned int)sizeof(field.commit),
(unsigned int)is_signed_type(long));
trace_seq_printf(s, "\tfield: int overwrite;\t"
"offset:%u;\tsize:%u;\tsigned:%u;\n",
(unsigned int)offsetof(typeof(field), commit),
1,
(unsigned int)is_signed_type(long));
trace_seq_printf(s, "\tfield: char data;\t"
"offset:%u;\tsize:%u;\tsigned:%u;\n",
(unsigned int)offsetof(typeof(field), data),
(unsigned int)BUF_PAGE_SIZE,
(unsigned int)is_signed_type(char));
return !trace_seq_has_overflowed(s);
tracing/events/ring-buffer: expose format of ring buffer headers to users Currently, every thing needed to read the binary output from the ring buffers is available, with the exception of the way the ring buffers handles itself internally. This patch creates two special files in the debugfs/tracing/events directory: # cat /debug/tracing/events/header_page field: u64 timestamp; offset:0; size:8; field: local_t commit; offset:8; size:8; field: char data; offset:16; size:4080; # cat /debug/tracing/events/header_event type : 2 bits len : 3 bits time_delta : 27 bits array : 32 bits padding : type == 0 time_extend : type == 1 data : type == 3 This is to allow a userspace app to see if the ring buffer format changes or not. [ Impact: allow userspace apps to know of ringbuffer format changes ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-16 00:53:47 +04:00
}
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
struct rb_irq_work {
struct irq_work work;
wait_queue_head_t waiters;
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
wait_queue_head_t full_waiters;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
bool waiters_pending;
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
bool full_waiters_pending;
bool wakeup_full;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
};
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
/*
* Structure to hold event state and handle nested events.
*/
struct rb_event_info {
u64 ts;
u64 delta;
unsigned long length;
struct buffer_page *tail_page;
int add_timestamp;
};
ring-buffer: Add enum names for the context levels Instead of having hard coded numbers for the context levels, use enums to describe them more. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 17:32:28 +03:00
/*
* Used for which event context the event is in.
* NMI = 0
* IRQ = 1
* SOFTIRQ = 2
* NORMAL = 3
*
* See trace_recursive_lock() comment below for more details.
*/
enum {
RB_CTX_NMI,
RB_CTX_IRQ,
RB_CTX_SOFTIRQ,
RB_CTX_NORMAL,
RB_CTX_MAX
};
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/*
* head_page == tail_page && head == tail then buffer is empty.
*/
struct ring_buffer_per_cpu {
int cpu;
trace: Reorder struct ring_buffer_per_cpu to remove padding on 64bit Reorder structure to remove 8 bytes of padding on 64 bit builds. This shrinks the size to 128 bytes so allowing allocation from a smaller slab & needed one fewer cache lines. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> LKML-Reference: <1269516456.2054.8.camel@localhost> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-25 14:27:36 +03:00
atomic_t record_disabled;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
struct ring_buffer *buffer;
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spinlock_t reader_lock; /* serialize readers */
locking: Convert raw_spinlock to arch_spinlock The raw_spin* namespace was taken by lockdep for the architecture specific implementations. raw_spin_* would be the ideal name space for the spinlocks which are not converted to sleeping locks in preempt-rt. Linus suggested to convert the raw_ to arch_ locks and cleanup the name space instead of using an artifical name like core_spin, atomic_spin or whatever No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 21:49:50 +03:00
arch_spinlock_t lock;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
struct lock_class_key lock_key;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
unsigned long nr_pages;
ring-buffer: Move recursive check to per_cpu descriptor Instead of using a global per_cpu variable to perform the recursive checks into the ring buffer, use the already existing per_cpu descriptor that is part of the ring buffer itself. Not only does this simplify the code, it also allows for one ring buffer to be used within the guts of the use of another ring buffer. For example trace_printk() can now be used within the ring buffer to record changes done by an instance into the main ring buffer. The recursion checks will prevent the trace_printk() itself from causing recursive issues with the main ring buffer (it is just ignored), but the recursive checks wont prevent the trace_printk() from recording other ring buffers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:27:47 +03:00
unsigned int current_context;
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
struct list_head *pages;
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
struct buffer_page *head_page; /* read from head */
struct buffer_page *tail_page; /* write to tail */
tracing: fix typos in comments Impact: clean up. Fix typos in the comments. Signed-off-by: Wenji Huang <wenji.huang@oracle.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-10 09:03:18 +03:00
struct buffer_page *commit_page; /* committed pages */
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
struct buffer_page *reader_page;
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
unsigned long lost_events;
unsigned long last_overrun;
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
local_t entries_bytes;
ring-buffer: convert cpu buffer entries to local_t The entries counter in cpu buffer is not atomic. It can be updated by other interrupts or from another CPU (readers). But making entries into "atomic_t" causes an atomic operation that can hurt performance. Instead we convert it to a local_t that will increment a counter with a local CPU atomic operation (if the arch supports it). Instead of fighting with readers and overwrites that decrement the counter, I added a "read" counter. Every time a reader reads an entry it is incremented. We already have a overrun counter and with that, the entries counter and the read counter, we can calculate the total number of entries in the buffer with: (entries - overrun) - read As long as the total number of entries in the ring buffer is less than the word size, this will work. But since the entries counter was previously a long, this is no different than what we had before. Thanks to Andrew Morton for pointing out in the first version that atomic_t does not replace unsigned long. I switched to atomic_long_t even though it is signed. A negative count is most likely a bug. [ Impact: keep accurate count of cpu buffer entries ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-01 04:49:44 +04:00
local_t entries;
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
local_t overrun;
local_t commit_overrun;
local_t dropped_events;
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
local_t committing;
local_t commits;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
unsigned long read;
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
unsigned long read_bytes;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
u64 write_stamp;
u64 read_stamp;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
/* ring buffer pages to update, > 0 to add, < 0 to remove */
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
long nr_pages_to_update;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
struct list_head new_pages; /* new pages to add */
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
struct work_struct update_pages_work;
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
struct completion update_done;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
struct rb_irq_work irq_work;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
};
struct ring_buffer {
unsigned flags;
int cpus;
atomic_t record_disabled;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
atomic_t resize_disabled;
ring_buffer: pahole struct ring_buffer While fixing some bugs in pahole (built-in.o files were not being processed due to relocation problems) I found out about these packable structures: $ pahole --packable kernel/trace/ring_buffer.o | grep ring ring_buffer 72 64 8 ring_buffer_per_cpu 112 104 8 If we take a look at the current layout of struct ring_buffer we can see that we have two 4 bytes holes. $ pahole -C ring_buffer kernel/trace/ring_buffer.o struct ring_buffer { unsigned int pages; /* 0 4 */ unsigned int flags; /* 4 4 */ int cpus; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ cpumask_var_t cpumask; /* 16 8 */ atomic_t record_disabled; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ struct mutex mutex; /* 32 32 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct ring_buffer_per_cpu * * buffers; /* 64 8 */ /* size: 72, cachelines: 2, members: 7 */ /* sum members: 64, holes: 2, sum holes: 8 */ /* last cacheline: 8 bytes */ }; So, if I ask pahole to reorganize it: $ pahole -C ring_buffer --reorganize kernel/trace/ring_buffer.o struct ring_buffer { unsigned int pages; /* 0 4 */ unsigned int flags; /* 4 4 */ int cpus; /* 8 4 */ atomic_t record_disabled; /* 12 4 */ cpumask_var_t cpumask; /* 16 8 */ struct mutex mutex; /* 24 32 */ struct ring_buffer_per_cpu * * buffers; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ /* size: 64, cachelines: 1, members: 7 */ }; /* saved 8 bytes and 1 cacheline! */ We get it using just one 64 bytes cacheline. To see what it did: $ pahole -C ring_buffer --reorganize --show_reorg_steps \ kernel/trace/ring_buffer.o | grep \/ /* Moving 'record_disabled' from after 'cpumask' to after 'cpus' */ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09 22:04:06 +03:00
cpumask_var_t cpumask;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: pass in lockdep class key for reader_lock On Sun, 7 Jun 2009, Ingo Molnar wrote: > Testing tracer sched_switch: <6>Starting ring buffer hammer > PASSED > Testing tracer sysprof: PASSED > Testing tracer function: PASSED > Testing tracer irqsoff: > ============================================= > PASSED > Testing tracer preemptoff: PASSED > Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ] > PASSED > Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760 > --------------------------------------------- > rb_consumer/431 is trying to acquire lock: > (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70 > > but task is already holding lock: > (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 > > other info that might help us debug this: > 1 lock held by rb_consumer/431: > #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 The ring buffer is a generic structure, and can be used outside of ftrace. If ftrace traces within the use of the ring buffer, it can produce false positives with lockdep. This patch passes in a static lock key into the allocation of the ring buffer, so that different ring buffers will have their own lock class. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1244477919.13761.9042.camel@twins> [ store key in ring buffer descriptor ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-08 20:18:39 +04:00
struct lock_class_key *reader_lock_key;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
struct mutex mutex;
struct ring_buffer_per_cpu **buffers;
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
ring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG The hotplug code in the ring buffers is for use with CPU hotplug, not generic hotplug. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 18:46:03 +03:00
#ifdef CONFIG_HOTPLUG_CPU
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
struct notifier_block cpu_notify;
#endif
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
u64 (*clock)(void);
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
struct rb_irq_work irq_work;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
};
struct ring_buffer_iter {
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long head;
struct buffer_page *head_page;
ring-buffer: Check if ring buffer iterator has stale data Usually reads of the ring buffer is performed by a single task. There are two types of reads from the ring buffer. One is a consuming read which will consume the entry that was read and the next read will be the entry that follows. The other is an iterator that will let the user read the contents of the ring buffer without modifying it. When an iterator is allocated, writes to the ring buffer are disabled to protect the iterator. The problem exists when consuming reads happen while an iterator is allocated. Specifically, the kind of read that swaps out an entire page (used by splice) and replaces it with a new read. If the iterator is on the page that is swapped out, then the next read may read from this swapped out page and return garbage. This patch adds a check when reading the iterator to make sure that the iterator contents are still valid. If a consuming read has taken place, the iterator is reset. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-25 23:17:47 +03:00
struct buffer_page *cache_reader_page;
unsigned long cache_read;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
u64 read_stamp;
};
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
/*
* rb_wake_up_waiters - wake up tasks waiting for ring buffer input
*
* Schedules a delayed work to wake up any task that is blocked on the
* ring buffer waiters queue.
*/
static void rb_wake_up_waiters(struct irq_work *work)
{
struct rb_irq_work *rbwork = container_of(work, struct rb_irq_work, work);
wake_up_all(&rbwork->waiters);
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
if (rbwork->wakeup_full) {
rbwork->wakeup_full = false;
wake_up_all(&rbwork->full_waiters);
}
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
}
/**
* ring_buffer_wait - wait for input to the ring buffer
* @buffer: buffer to wait on
* @cpu: the cpu buffer to wait on
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
* @full: wait until a full page is available, if @cpu != RING_BUFFER_ALL_CPUS
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
*
* If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon
* as data is added to any of the @buffer's cpu buffers. Otherwise
* it will wait for data to be added to a specific cpu buffer.
*/
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
int ring_buffer_wait(struct ring_buffer *buffer, int cpu, bool full)
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
{
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
struct ring_buffer_per_cpu *uninitialized_var(cpu_buffer);
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
DEFINE_WAIT(wait);
struct rb_irq_work *work;
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
int ret = 0;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
/*
* Depending on what the caller is waiting for, either any
* data in any cpu buffer, or a specific buffer, put the
* caller on the appropriate wait queue.
*/
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
if (cpu == RING_BUFFER_ALL_CPUS) {
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
work = &buffer->irq_work;
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
/* Full only makes sense on per cpu reads */
full = false;
} else {
ring-buffer: Check if buffer exists before polling The per_cpu buffers are created one per possible CPU. But these do not mean that those CPUs are online, nor do they even exist. With the addition of the ring buffer polling, it assumes that the caller polls on an existing buffer. But this is not the case if the user reads trace_pipe from a CPU that does not exist, and this causes the kernel to crash. Simple fix is to check the cpu against buffer bitmask against to see if the buffer was allocated or not and return -ENODEV if it is not. More updates were done to pass the -ENODEV back up to userspace. Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.com Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-10 17:46:00 +04:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return -ENODEV;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
cpu_buffer = buffer->buffers[cpu];
work = &cpu_buffer->irq_work;
}
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
while (true) {
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
if (full)
prepare_to_wait(&work->full_waiters, &wait, TASK_INTERRUPTIBLE);
else
prepare_to_wait(&work->waiters, &wait, TASK_INTERRUPTIBLE);
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
/*
* The events can happen in critical sections where
* checking a work queue can cause deadlocks.
* After adding a task to the queue, this flag is set
* only to notify events to try to wake up the queue
* using irq_work.
*
* We don't clear it even if the buffer is no longer
* empty. The flag only causes the next event to run
* irq_work to do the work queue wake up. The worse
* that can happen if we race with !trace_empty() is that
* an event will cause an irq_work to try to wake up
* an empty queue.
*
* There's no reason to protect this flag either, as
* the work queue and irq_work logic will do the necessary
* synchronization for the wake ups. The only thing
* that is necessary is that the wake up happens after
* a task has been queued. It's OK for spurious wake ups.
*/
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
if (full)
work->full_waiters_pending = true;
else
work->waiters_pending = true;
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
if (signal_pending(current)) {
ret = -EINTR;
break;
}
if (cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer))
break;
if (cpu != RING_BUFFER_ALL_CPUS &&
!ring_buffer_empty_cpu(buffer, cpu)) {
unsigned long flags;
bool pagebusy;
if (!full)
break;
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
pagebusy = cpu_buffer->reader_page == cpu_buffer->commit_page;
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
if (!pagebusy)
break;
}
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
schedule();
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
}
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
if (full)
finish_wait(&work->full_waiters, &wait);
else
finish_wait(&work->waiters, &wait);
tracing: Do not busy wait in buffer splice On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Cc: stable@vger.kernel.org # 3.16+ Fixes: b1169cc69ba9 ("tracing: Remove mock up poll wait function") Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-10 21:46:34 +03:00
return ret;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
}
/**
* ring_buffer_poll_wait - poll on buffer input
* @buffer: buffer to wait on
* @cpu: the cpu buffer to wait on
* @filp: the file descriptor
* @poll_table: The poll descriptor
*
* If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon
* as data is added to any of the @buffer's cpu buffers. Otherwise
* it will wait for data to be added to a specific cpu buffer.
*
* Returns POLLIN | POLLRDNORM if data exists in the buffers,
* zero otherwise.
*/
int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu,
struct file *filp, poll_table *poll_table)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct rb_irq_work *work;
if (cpu == RING_BUFFER_ALL_CPUS)
work = &buffer->irq_work;
else {
ring-buffer: Do not poll non allocated cpu buffers The tracing infrastructure sets up for possible CPUs, but it uses the ring buffer polling, it is possible to call the ring buffer polling code with a CPU that hasn't been allocated. This will cause a kernel oops when it access a ring buffer cpu buffer that is part of the possible cpus but hasn't been allocated yet as the CPU has never been online. Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-05-23 22:21:36 +04:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return -EINVAL;
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
cpu_buffer = buffer->buffers[cpu];
work = &cpu_buffer->irq_work;
}
poll_wait(filp, &work->waiters, poll_table);
trace: Fix epoll hang when we race with new entries Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is empty when we set waiters_pending but an event shows up exactly at that moment we can miss being woken up by the ring buffers irq work. Since ring_buffer_empty() is inherently racey we will sometimes think that the buffer is not empty. So we don't get woken up and we don't think there are any events even though there were some ready when we added the watch, which makes us hang. This patch fixes this by making sure that we are actually on the wait list before we set waiters_pending, and add a memory barrier to make sure ring_buffer_empty() is going to be correct. Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com Cc: stable@vger.kernel.org # 3.10+ Cc: Martin Lau <kafai@fb.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-08-25 21:59:41 +04:00
work->waiters_pending = true;
/*
* There's a tight race between setting the waiters_pending and
* checking if the ring buffer is empty. Once the waiters_pending bit
* is set, the next event will wake the task up, but we can get stuck
* if there's only a single event in.
*
* FIXME: Ideally, we need a memory barrier on the writer side as well,
* but adding a memory barrier to all events will cause too much of a
* performance hit in the fast path. We only need a memory barrier when
* the buffer goes from empty to having content. But as this race is
* extremely small, and it's not a problem if another event comes in, we
* will fix it later.
*/
smp_mb();
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
if ((cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer)) ||
(cpu != RING_BUFFER_ALL_CPUS && !ring_buffer_empty_cpu(buffer, cpu)))
return POLLIN | POLLRDNORM;
return 0;
}
ring-buffer: replace most bug ons with warn on and disable buffer This patch replaces most of the BUG_ONs in the ring_buffer code with RB_WARN_ON variants. It adds some more variants as needed for the replacement. This lets the buffer die nicely and still warn the user. One BUG_ON remains in the code, and that is because it detects a bad pointer passed in by the calling function, and not a bug by the ring buffer code itself. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 07:07:30 +03:00
/* buffer may be either ring_buffer or ring_buffer_per_cpu */
ring-buffer: disable all cpu buffers when one finds a problem Currently the way RB_WARN_ON works, is to disable either the current CPU buffer or all CPU buffers, depending on whether a ring_buffer or ring_buffer_per_cpu struct was passed into the macro. Most users of the RB_WARN_ON pass in the CPU buffer, so only the one CPU buffer gets disabled but the rest are still active. This may confuse users even though a warning is sent to the console. This patch changes the macro to disable the entire buffer even if the CPU buffer is passed in. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 03:53:46 +04:00
#define RB_WARN_ON(b, cond) \
({ \
int _____ret = unlikely(cond); \
if (_____ret) { \
if (__same_type(*(b), struct ring_buffer_per_cpu)) { \
struct ring_buffer_per_cpu *__b = \
(void *)b; \
atomic_inc(&__b->buffer->record_disabled); \
} else \
atomic_inc(&b->record_disabled); \
WARN_ON(1); \
} \
_____ret; \
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
})
ring-buffer: replace most bug ons with warn on and disable buffer This patch replaces most of the BUG_ONs in the ring_buffer code with RB_WARN_ON variants. It adds some more variants as needed for the replacement. This lets the buffer die nicely and still warn the user. One BUG_ON remains in the code, and that is because it detects a bad pointer passed in by the calling function, and not a bug by the ring buffer code itself. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 07:07:30 +03:00
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
/* Up this if you want to test the TIME_EXTENTS and normalization */
#define DEBUG_SHIFT 0
tracing: Remove cpu arg from the rb_time_stamp() function The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24 03:36:19 +04:00
static inline u64 rb_time_stamp(struct ring_buffer *buffer)
ring-buffer: use internal time stamp function The ring_buffer_time_stamp that is exported adds a little more overhead than is needed for using it internally. This patch adds an internal timestamp function that can be inlined (a single line function) and used internally for the ring buffer. [ Impact: a little less overhead to the ring buffer ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-12 00:28:23 +04:00
{
/* shift to debug/test normalization and TIME_EXTENTS */
return buffer->clock() << DEBUG_SHIFT;
}
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu)
{
u64 time;
preempt_disable_notrace();
tracing: Remove cpu arg from the rb_time_stamp() function The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24 03:36:19 +04:00
time = rb_time_stamp(buffer);
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
preempt_enable_no_resched_notrace();
return time;
}
EXPORT_SYMBOL_GPL(ring_buffer_time_stamp);
void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer,
int cpu, u64 *ts)
{
/* Just stupid testing the normalize function and deltas */
*ts >>= DEBUG_SHIFT;
}
EXPORT_SYMBOL_GPL(ring_buffer_normalize_time_stamp);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* Making the ring buffer lockless makes things tricky.
* Although writes only happen on the CPU that they are on,
* and they only need to worry about interrupts. Reads can
* happen on any CPU.
*
* The reader page is always off the ring buffer, but when the
* reader finishes with a page, it needs to swap its page with
* a new one from the buffer. The reader needs to take from
* the head (writes go to the tail). But if a writer is in overwrite
* mode and wraps, it must push the head page forward.
*
* Here lies the problem.
*
* The reader must be careful to replace only the head page, and
* not another one. As described at the top of the file in the
* ASCII art, the reader sets its old page to point to the next
* page after head. It then sets the page after head to point to
* the old reader page. But if the writer moves the head page
* during this operation, the reader could end up with the tail.
*
* We use cmpxchg to help prevent this race. We also do something
* special with the page before head. We set the LSB to 1.
*
* When the writer must push the page forward, it will clear the
* bit that points to the head page, move the head, and then set
* the bit that points to the new head page.
*
* We also don't want an interrupt coming in and moving the head
* page on another writer. Thus we use the second LSB to catch
* that too. Thus:
*
* head->list->prev->next bit 1 bit 0
* ------- -------
* Normal page 0 0
* Points to head page 0 1
* New head page 1 0
*
* Note we can not trust the prev pointer of the head page, because:
*
* +----+ +-----+ +-----+
* | |------>| T |---X--->| N |
* | |<------| | | |
* +----+ +-----+ +-----+
* ^ ^ |
* | +-----+ | |
* +----------| R |----------+ |
* | |<-----------+
* +-----+
*
* Key: ---X--> HEAD flag set in pointer
* T Tail page
* R Reader page
* N Next page
*
* (see __rb_reserve_next() to see where this happens)
*
* What the above shows is that the reader just swapped out
* the reader page with a page in the buffer, but before it
* could make the new header point back to the new page added
* it was preempted by a writer. The writer moved forward onto
* the new page added by the reader and is about to move forward
* again.
*
* You can see, it is legitimate for the previous pointer of
* the head (or any page) not to point back to itself. But only
* temporarially.
*/
#define RB_PAGE_NORMAL 0UL
#define RB_PAGE_HEAD 1UL
#define RB_PAGE_UPDATE 2UL
#define RB_FLAG_MASK 3UL
/* PAGE_MOVED is not part of the mask */
#define RB_PAGE_MOVED 4UL
/*
* rb_list_head - remove any bit
*/
static struct list_head *rb_list_head(struct list_head *list)
{
unsigned long val = (unsigned long)list;
return (struct list_head *)(val & ~RB_FLAG_MASK);
}
/*
tracing: Remove cpu arg from the rb_time_stamp() function The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24 03:36:19 +04:00
* rb_is_head_page - test if the given page is the head page
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
*
* Because the reader may move the head_page pointer, we can
* not trust what the head page is (it may be pointing to
* the reader page). But if the next page is a header page,
* its flags will be non zero.
*/
Kill off warning: ‘inline’ is not at beginning of declaration Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-17 02:09:38 +03:00
static inline int
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_is_head_page(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *page, struct list_head *list)
{
unsigned long val;
val = (unsigned long)list->next;
if ((val & ~RB_FLAG_MASK) != (unsigned long)&page->list)
return RB_PAGE_MOVED;
return val & RB_FLAG_MASK;
}
/*
* rb_is_reader_page
*
* The unique thing about the reader page, is that, if the
* writer is ever on it, the previous pointer never points
* back to the reader page.
*/
ring-buffer: rb_is_reader_page() can return boolean Make rb_is_reader_page() return bool to improve readability due to this particular function only using either true or false as its return value. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-4-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:31 +03:00
static bool rb_is_reader_page(struct buffer_page *page)
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
{
struct list_head *list = page->list.prev;
return rb_list_head(list->next) != &page->list;
}
/*
* rb_set_list_to_head - set a list_head to be pointing to head.
*/
static void rb_set_list_to_head(struct ring_buffer_per_cpu *cpu_buffer,
struct list_head *list)
{
unsigned long *ptr;
ptr = (unsigned long *)&list->next;
*ptr |= RB_PAGE_HEAD;
*ptr &= ~RB_PAGE_UPDATE;
}
/*
* rb_head_page_activate - sets up head page
*/
static void rb_head_page_activate(struct ring_buffer_per_cpu *cpu_buffer)
{
struct buffer_page *head;
head = cpu_buffer->head_page;
if (!head)
return;
/*
* Set the previous list pointer to have the HEAD flag.
*/
rb_set_list_to_head(cpu_buffer, head->list.prev);
}
static void rb_list_head_clear(struct list_head *list)
{
unsigned long *ptr = (unsigned long *)&list->next;
*ptr &= ~RB_FLAG_MASK;
}
/*
* rb_head_page_dactivate - clears head page ptr (for free list)
*/
static void
rb_head_page_deactivate(struct ring_buffer_per_cpu *cpu_buffer)
{
struct list_head *hd;
/* Go through the whole list and clear any pointers found. */
rb_list_head_clear(cpu_buffer->pages);
list_for_each(hd, cpu_buffer->pages)
rb_list_head_clear(hd);
}
static int rb_head_page_set(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *head,
struct buffer_page *prev,
int old_flag, int new_flag)
{
struct list_head *list;
unsigned long val = (unsigned long)&head->list;
unsigned long ret;
list = &prev->list;
val &= ~RB_FLAG_MASK;
ring-buffer: typecast cmpxchg to fix PowerPC warning The cmpxchg used by PowerPC does the following: ({ \ __typeof__(*(ptr)) _o_ = (o); \ __typeof__(*(ptr)) _n_ = (n); \ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ (unsigned long)_n_, sizeof(*(ptr))); \ }) This does a type check of *ptr to both o and n. Unfortunately, the code in ring-buffer.c assigns longs to pointers and pointers to longs and causes a warning on PowerPC: ring_buffer.c: In function 'rb_head_page_set': ring_buffer.c:704: warning: initialization makes pointer from integer without a cast ring_buffer.c:704: warning: initialization makes pointer from integer without a cast ring_buffer.c: In function 'rb_head_page_replace': ring_buffer.c:797: warning: initialization makes integer from pointer without a cast This patch adds the typecasts inside cmpxchg to annotate that a long is being cast to a pointer and a pointer is being casted to a long and this removes the PowerPC warnings. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-14 17:31:35 +04:00
ret = cmpxchg((unsigned long *)&list->next,
val | old_flag, val | new_flag);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/* check if the reader took the page */
if ((ret & ~RB_FLAG_MASK) != val)
return RB_PAGE_MOVED;
return ret & RB_FLAG_MASK;
}
static int rb_head_page_set_update(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *head,
struct buffer_page *prev,
int old_flag)
{
return rb_head_page_set(cpu_buffer, head, prev,
old_flag, RB_PAGE_UPDATE);
}
static int rb_head_page_set_head(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *head,
struct buffer_page *prev,
int old_flag)
{
return rb_head_page_set(cpu_buffer, head, prev,
old_flag, RB_PAGE_HEAD);
}
static int rb_head_page_set_normal(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *head,
struct buffer_page *prev,
int old_flag)
{
return rb_head_page_set(cpu_buffer, head, prev,
old_flag, RB_PAGE_NORMAL);
}
static inline void rb_inc_page(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page **bpage)
{
struct list_head *p = rb_list_head((*bpage)->list.next);
*bpage = list_entry(p, struct buffer_page, list);
}
static struct buffer_page *
rb_set_head_page(struct ring_buffer_per_cpu *cpu_buffer)
{
struct buffer_page *head;
struct buffer_page *page;
struct list_head *list;
int i;
if (RB_WARN_ON(cpu_buffer, !cpu_buffer->head_page))
return NULL;
/* sanity check */
list = cpu_buffer->pages;
if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev->next) != list))
return NULL;
page = head = cpu_buffer->head_page;
/*
* It is possible that the writer moves the header behind
* where we started, and we miss in one loop.
* A second loop should grab the header, but we'll do
* three loops just because I'm paranoid.
*/
for (i = 0; i < 3; i++) {
do {
if (rb_is_head_page(cpu_buffer, page, page->list.prev)) {
cpu_buffer->head_page = page;
return page;
}
rb_inc_page(cpu_buffer, &page);
} while (page != head);
}
RB_WARN_ON(cpu_buffer, 1);
return NULL;
}
static int rb_head_page_replace(struct buffer_page *old,
struct buffer_page *new)
{
unsigned long *ptr = (unsigned long *)&old->list.prev->next;
unsigned long val;
unsigned long ret;
val = *ptr & ~RB_FLAG_MASK;
val |= RB_PAGE_HEAD;
ring-buffer: typecast cmpxchg to fix PowerPC warning The cmpxchg used by PowerPC does the following: ({ \ __typeof__(*(ptr)) _o_ = (o); \ __typeof__(*(ptr)) _n_ = (n); \ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ (unsigned long)_n_, sizeof(*(ptr))); \ }) This does a type check of *ptr to both o and n. Unfortunately, the code in ring-buffer.c assigns longs to pointers and pointers to longs and causes a warning on PowerPC: ring_buffer.c: In function 'rb_head_page_set': ring_buffer.c:704: warning: initialization makes pointer from integer without a cast ring_buffer.c:704: warning: initialization makes pointer from integer without a cast ring_buffer.c: In function 'rb_head_page_replace': ring_buffer.c:797: warning: initialization makes integer from pointer without a cast This patch adds the typecasts inside cmpxchg to annotate that a long is being cast to a pointer and a pointer is being casted to a long and this removes the PowerPC warnings. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-14 17:31:35 +04:00
ret = cmpxchg(ptr, val, (unsigned long)&new->list);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
return ret == val;
}
/*
* rb_tail_page_update - move the tail page forward
*/
ring-buffer: Remove redundant update of page timestamp The first commit of a buffer page updates the timestamp of that page. No need to have the update to the next page add the timestamp too. It will only be replaced by the first commit on that page anyway. Only update to a page if it contains an event. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 23:15:19 +03:00
static void rb_tail_page_update(struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
struct buffer_page *tail_page,
struct buffer_page *next_page)
{
unsigned long old_entries;
unsigned long old_write;
/*
* The tail page now needs to be moved forward.
*
* We need to reset the tail page, but without messing
* with possible erasing of data brought in by interrupts
* that have moved the tail page and are currently on it.
*
* We add a counter to the write field to denote this.
*/
old_write = local_add_return(RB_WRITE_INTCNT, &next_page->write);
old_entries = local_add_return(RB_WRITE_INTCNT, &next_page->entries);
/*
* Just make sure we have seen our old_write and synchronize
* with any interrupts that come in.
*/
barrier();
/*
* If the tail page is still the same as what we think
* it is, then it is up to us to update the tail
* pointer.
*/
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
if (tail_page == READ_ONCE(cpu_buffer->tail_page)) {
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/* Zero the write counter */
unsigned long val = old_write & ~RB_WRITE_MASK;
unsigned long eval = old_entries & ~RB_WRITE_MASK;
/*
* This will only succeed if an interrupt did
* not come in and change it. In which case, we
* do not want to modify it.
ring_buffer: Fix warning while ignoring cmpxchg return value kernel/trace/ring_buffer.c: In function 'rb_tail_page_update': kernel/trace/ring_buffer.c:849: warning: value computed is not used kernel/trace/ring_buffer.c:850: warning: value computed is not used Add "(void)"s to fix this warning, because we don't need here to handle the fail case of cmpxchg, it's fine if an interrupt already did the job. Changed from V1: Add a comment(which is written by Steven) for it. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-15 12:27:30 +04:00
*
* We add (void) to let the compiler know that we do not care
* about the return value of these functions. We use the
* cmpxchg to only update if an interrupt did not already
* do it for us. If the cmpxchg fails, we don't care.
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
*/
ring_buffer: Fix warning while ignoring cmpxchg return value kernel/trace/ring_buffer.c: In function 'rb_tail_page_update': kernel/trace/ring_buffer.c:849: warning: value computed is not used kernel/trace/ring_buffer.c:850: warning: value computed is not used Add "(void)"s to fix this warning, because we don't need here to handle the fail case of cmpxchg, it's fine if an interrupt already did the job. Changed from V1: Add a comment(which is written by Steven) for it. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-07-15 12:27:30 +04:00
(void)local_cmpxchg(&next_page->write, old_write, val);
(void)local_cmpxchg(&next_page->entries, old_entries, eval);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* No need to worry about races with clearing out the commit.
* it only can increment when a commit takes place. But that
* only happens in the outer most nested commit.
*/
local_set(&next_page->page->commit, 0);
ring-buffer: Remove redundant update of page timestamp The first commit of a buffer page updates the timestamp of that page. No need to have the update to the next page add the timestamp too. It will only be replaced by the first commit on that page anyway. Only update to a page if it contains an event. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 23:15:19 +03:00
/* Again, either we update tail_page or an interrupt does */
(void)cmpxchg(&cpu_buffer->tail_page, tail_page, next_page);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
}
}
static int rb_check_bpage(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *bpage)
{
unsigned long val = (unsigned long)bpage;
if (RB_WARN_ON(cpu_buffer, val & RB_FLAG_MASK))
return 1;
return 0;
}
/**
* rb_check_list - make sure a pointer to a list has the last bits zero
*/
static int rb_check_list(struct ring_buffer_per_cpu *cpu_buffer,
struct list_head *list)
{
if (RB_WARN_ON(cpu_buffer, rb_list_head(list->prev) != list->prev))
return 1;
if (RB_WARN_ON(cpu_buffer, rb_list_head(list->next) != list->next))
return 1;
return 0;
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* rb_check_pages - integrity check of buffer pages
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* @cpu_buffer: CPU buffer with pages to test
*
tracing: fix typos in comments Impact: clean up. Fix typos in the comments. Signed-off-by: Wenji Huang <wenji.huang@oracle.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-10 09:03:18 +03:00
* As a safety measure we check to make sure the data pages have not
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* been corrupted.
*/
static int rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer)
{
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
struct list_head *head = cpu_buffer->pages;
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
struct buffer_page *bpage, *tmp;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Reset head page before running self test When the ring buffer does its consistency test on itself, it removes the head page, runs the tests, and then adds it back to what the "head_page" pointer was. But because the head_page pointer may lack behind the real head page (held by the link list pointer). The reset may be incorrect. Instead, if the head_page exists (it does not on first allocation) reset it back to the real head page before running the consistency tests. Then it will be put back to its original location after the tests are complete. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-17 03:46:32 +04:00
/* Reset the head page if it exists */
if (cpu_buffer->head_page)
rb_set_head_page(cpu_buffer);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_deactivate(cpu_buffer);
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer, head->next->prev != head))
return -1;
if (RB_WARN_ON(cpu_buffer, head->prev->next != head))
return -1;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
if (rb_check_list(cpu_buffer, head))
return -1;
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
list_for_each_entry_safe(bpage, tmp, head, list) {
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer,
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
bpage->list.next->prev != &bpage->list))
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
return -1;
if (RB_WARN_ON(cpu_buffer,
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
bpage->list.prev->next != &bpage->list))
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
return -1;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
if (rb_check_list(cpu_buffer, &bpage->list))
return -1;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_activate(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return 0;
}
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
static int __rb_allocate_pages(long nr_pages, struct list_head *pages, int cpu)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
struct buffer_page *bpage, *tmp;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
long i;
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
for (i = 0; i < nr_pages; i++) {
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
struct page *page;
ring-buffer: Set __GFP_NORETRY flag for ring buffer allocating process The tracing ring buffer is allocated from kernel memory. While allocating a large chunk of memory, OOM might happen which destabilizes the system. Thus random processes might get killed during the allocation. This patch adds __GFP_NORETRY flag to the ring buffer allocation calls to make it fail more gracefully if the system will not be able to complete the allocation request. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-08 04:01:42 +04:00
/*
* __GFP_NORETRY flag makes sure that the allocation fails
* gracefully without invoking oom-killer and the system is
* not destabilized.
*/
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()),
ring-buffer: Set __GFP_NORETRY flag for ring buffer allocating process The tracing ring buffer is allocated from kernel memory. While allocating a large chunk of memory, OOM might happen which destabilizes the system. Thus random processes might get killed during the allocation. This patch adds __GFP_NORETRY flag to the ring buffer allocation calls to make it fail more gracefully if the system will not be able to complete the allocation request. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-08 04:01:42 +04:00
GFP_KERNEL | __GFP_NORETRY,
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_to_node(cpu));
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
if (!bpage)
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
goto free_pages;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
list_add(&bpage->list, pages);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
page = alloc_pages_node(cpu_to_node(cpu),
ring-buffer: Set __GFP_NORETRY flag for ring buffer allocating process The tracing ring buffer is allocated from kernel memory. While allocating a large chunk of memory, OOM might happen which destabilizes the system. Thus random processes might get killed during the allocation. This patch adds __GFP_NORETRY flag to the ring buffer allocation calls to make it fail more gracefully if the system will not be able to complete the allocation request. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-08 04:01:42 +04:00
GFP_KERNEL | __GFP_NORETRY, 0);
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
if (!page)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
goto free_pages;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
bpage->page = page_address(page);
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
rb_init_page(bpage->page);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
return 0;
free_pages:
list_for_each_entry_safe(bpage, tmp, pages, list) {
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
return -ENOMEM;
}
static int rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
unsigned long nr_pages)
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
{
LIST_HEAD(pages);
WARN_ON(!nr_pages);
if (__rb_allocate_pages(nr_pages, &pages, cpu_buffer->cpu))
return -ENOMEM;
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
/*
* The ring buffer page list is a circular list that does not
* start and end with a list head. All page list items point to
* other pages.
*/
cpu_buffer->pages = pages.next;
list_del(&pages);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_buffer->nr_pages = nr_pages;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
rb_check_pages(cpu_buffer);
return 0;
}
static struct ring_buffer_per_cpu *
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
rb_allocate_cpu_buffer(struct ring_buffer *buffer, long nr_pages, int cpu)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
struct buffer_page *bpage;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
struct page *page;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
int ret;
cpu_buffer = kzalloc_node(ALIGN(sizeof(*cpu_buffer), cache_line_size()),
GFP_KERNEL, cpu_to_node(cpu));
if (!cpu_buffer)
return NULL;
cpu_buffer->cpu = cpu;
cpu_buffer->buffer = buffer;
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_init(&cpu_buffer->reader_lock);
ring-buffer: pass in lockdep class key for reader_lock On Sun, 7 Jun 2009, Ingo Molnar wrote: > Testing tracer sched_switch: <6>Starting ring buffer hammer > PASSED > Testing tracer sysprof: PASSED > Testing tracer function: PASSED > Testing tracer irqsoff: > ============================================= > PASSED > Testing tracer preemptoff: PASSED > Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ] > PASSED > Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760 > --------------------------------------------- > rb_consumer/431 is trying to acquire lock: > (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70 > > but task is already holding lock: > (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 > > other info that might help us debug this: > 1 lock held by rb_consumer/431: > #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 The ring buffer is a generic structure, and can be used outside of ftrace. If ftrace traces within the use of the ring buffer, it can produce false positives with lockdep. This patch passes in a static lock key into the allocation of the ring buffer, so that different ring buffers will have their own lock class. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1244477919.13761.9042.camel@twins> [ store key in ring buffer descriptor ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-08 20:18:39 +04:00
lockdep_set_class(&cpu_buffer->reader_lock, buffer->reader_lock_key);
locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKED Further name space cleanup. No functional change Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-03 14:38:57 +03:00
cpu_buffer->lock = (arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
INIT_WORK(&cpu_buffer->update_pages_work, update_pages_handler);
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
init_completion(&cpu_buffer->update_done);
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
init_irq_work(&cpu_buffer->irq_work.work, rb_wake_up_waiters);
ring-buffer: Init waitqueue for blocked readers The move of blocked readers to the ring buffer left out the init of the wait queue that is used. Tests missed this due to running stress tests against the buffers, which didn't allow for any readers to end up waiting. Running a simple read and wait triggered a bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-05 02:33:05 +04:00
init_waitqueue_head(&cpu_buffer->irq_work.waiters);
ring-buffer: Do not wake up a splice waiter when page is not full When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: stable@vger.kernel.org # 3.16+ Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aad220 "tracing: Do not busy wait in buffer splice" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-11 06:14:53 +03:00
init_waitqueue_head(&cpu_buffer->irq_work.full_waiters);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
bpage = kzalloc_node(ALIGN(sizeof(*bpage), cache_line_size()),
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
GFP_KERNEL, cpu_to_node(cpu));
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
if (!bpage)
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
goto fail_free_buffer;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_check_bpage(cpu_buffer, bpage);
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
cpu_buffer->reader_page = bpage;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
page = alloc_pages_node(cpu_to_node(cpu), GFP_KERNEL, 0);
if (!page)
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
goto fail_free_reader;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
bpage->page = page_address(page);
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
rb_init_page(bpage->page);
ring_buffer: allocate buffer page pointer The current method of overlaying the page frame as the buffer page pointer can be very dangerous and limits our ability to do other things with a page from the buffer, like send it off to disk. This patch allocates the buffer_page instead of overlaying the page's page frame. The use of the buffer_page has hardly changed due to this. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 19:14:54 +04:00
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
ring-buffer: Fix crash due to uninitialized new_pages list head The new_pages list head in the cpu_buffer is not initialized. When adding pages to the ring buffer, if the memory allocation fails in ring_buffer_resize, the clean up handler tries to free up the allocated pages from all the cpu buffers. The panic is caused by referencing the uninitialized new_pages list head. Initializing the new_pages list head in rb_allocate_cpu_buffer fixes this. Link: http://lkml.kernel.org/r/1340391005-10880-1-git-send-email-vnagarnaik@google.com Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-22 22:50:05 +04:00
INIT_LIST_HEAD(&cpu_buffer->new_pages);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
ret = rb_allocate_pages(cpu_buffer, nr_pages);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
if (ret < 0)
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto fail_free_reader;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer->head_page
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
= list_entry(cpu_buffer->pages, struct buffer_page, list);
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
cpu_buffer->tail_page = cpu_buffer->commit_page = cpu_buffer->head_page;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_activate(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return cpu_buffer;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
fail_free_reader:
free_buffer_page(cpu_buffer->reader_page);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
fail_free_buffer:
kfree(cpu_buffer);
return NULL;
}
static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer)
{
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
struct list_head *head = cpu_buffer->pages;
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
struct buffer_page *bpage, *tmp;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
free_buffer_page(cpu_buffer->reader_page);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_deactivate(cpu_buffer);
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
if (head) {
list_for_each_entry_safe(bpage, tmp, head, list) {
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
bpage = list_entry(head, struct buffer_page, list);
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
free_buffer_page(bpage);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
kfree(cpu_buffer);
}
ring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG The hotplug code in the ring buffers is for use with CPU hotplug, not generic hotplug. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 18:46:03 +03:00
#ifdef CONFIG_HOTPLUG_CPU
tracing/ring-buffer: don't annotate rb_cpu_notify with __cpuinit Impact: remove a section warning CONFIG_DEBUG_SECTION_MISMATCH raises the following warning on -tip: WARNING: kernel/trace/built-in.o(.text+0x5bc5): Section mismatch in reference from the function ring_buffer_alloc() to the function .cpuinit.text:rb_cpu_notify() The function ring_buffer_alloc() references the function __cpuinit rb_cpu_notify(). This is actually harmless. The code in the ring buffer don't build rb_cpu_notify and other cpu hotplug stuffs when !CONFIG_HOTPLUG_CPU so we have no risk to reference freed memory here (it would even be harmless if we unconditionally build it because register_cpu_notifier would do nothing when !CONFIG_HOTPLUG_CPU. But since ring_buffer_alloc() can be called everytime, we don't want it to be annotated with __cpuinit so we drop the __cpuinit from rb_cpu_notify. This is not a waste of memory because it is only defined and used on CONFIG_HOTPLUG_CPU. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237606416-22268-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-21 06:33:36 +03:00
static int rb_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
#endif
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* __ring_buffer_alloc - allocate a new ring_buffer
ring_buffer: update description for ring_buffer_alloc() Trivial patch. Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-11-24 14:24:12 +03:00
* @size: the size in bytes per cpu that is needed.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* @flags: attributes to set for the ring buffer.
*
* Currently the only flag that is available is the RB_FL_OVERWRITE
* flag. This flag means that the buffer will overwrite old data
* when the buffer wraps. If this flag is not set, the buffer will
* drop data when the tail hits the head.
*/
ring-buffer: pass in lockdep class key for reader_lock On Sun, 7 Jun 2009, Ingo Molnar wrote: > Testing tracer sched_switch: <6>Starting ring buffer hammer > PASSED > Testing tracer sysprof: PASSED > Testing tracer function: PASSED > Testing tracer irqsoff: > ============================================= > PASSED > Testing tracer preemptoff: PASSED > Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ] > PASSED > Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760 > --------------------------------------------- > rb_consumer/431 is trying to acquire lock: > (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70 > > but task is already holding lock: > (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 > > other info that might help us debug this: > 1 lock held by rb_consumer/431: > #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 The ring buffer is a generic structure, and can be used outside of ftrace. If ftrace traces within the use of the ring buffer, it can produce false positives with lockdep. This patch passes in a static lock key into the allocation of the ring buffer, so that different ring buffers will have their own lock class. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1244477919.13761.9042.camel@twins> [ store key in ring buffer descriptor ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-08 20:18:39 +04:00
struct ring_buffer *__ring_buffer_alloc(unsigned long size, unsigned flags,
struct lock_class_key *key)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer *buffer;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
long nr_pages;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
int bsize;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
int cpu;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/* keep it in its own cache line */
buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
GFP_KERNEL);
if (!buffer)
return NULL;
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!alloc_cpumask_var(&buffer->cpumask, GFP_KERNEL))
goto fail_free_buffer;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
buffer->flags = flags;
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
buffer->clock = trace_clock_local;
ring-buffer: pass in lockdep class key for reader_lock On Sun, 7 Jun 2009, Ingo Molnar wrote: > Testing tracer sched_switch: <6>Starting ring buffer hammer > PASSED > Testing tracer sysprof: PASSED > Testing tracer function: PASSED > Testing tracer irqsoff: > ============================================= > PASSED > Testing tracer preemptoff: PASSED > Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ] > PASSED > Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760 > --------------------------------------------- > rb_consumer/431 is trying to acquire lock: > (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70 > > but task is already holding lock: > (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 > > other info that might help us debug this: > 1 lock held by rb_consumer/431: > #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 The ring buffer is a generic structure, and can be used outside of ftrace. If ftrace traces within the use of the ring buffer, it can produce false positives with lockdep. This patch passes in a static lock key into the allocation of the ring buffer, so that different ring buffers will have their own lock class. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1244477919.13761.9042.camel@twins> [ store key in ring buffer descriptor ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-08 20:18:39 +04:00
buffer->reader_lock_key = key;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
init_irq_work(&buffer->irq_work.work, rb_wake_up_waiters);
ring-buffer: Init waitqueue for blocked readers The move of blocked readers to the ring buffer left out the init of the wait queue that is used. Tests missed this due to running stress tests against the buffers, which didn't allow for any readers to end up waiting. Running a simple read and wait triggered a bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-05 02:33:05 +04:00
init_waitqueue_head(&buffer->irq_work.waiters);
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/* need at least two pages */
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
if (nr_pages < 2)
nr_pages = 2;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing/ring-buffer: fix non cpu hotplug case Impact: fix warning with irqsoff tracer The ring buffer allocates its buffers on pre-smp time (early_initcall). It means that, at first, only the boot cpu buffer is allocated and the ring-buffer cpumask only has the boot cpu set (cpu_online_mask). Later, the secondary cpu will show up and the ring-buffer will be notified about this event: the appropriate buffer will be allocated and the cpumask will be updated. Unfortunately, if !CONFIG_CPU_HOTPLUG, the ring-buffer will not be notified about the secondary cpus, meaning that the cpumask will have only the cpu boot set, and only one cpu buffer allocated. We fix that by using cpu_possible_mask if !CONFIG_CPU_HOTPLUG. This patch fixes the following warning with irqsoff tracer running: [ 169.317794] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xcc/0xf3() [ 169.318002] Hardware name: AMILO Li 2727 [ 169.318002] Modules linked in: [ 169.318002] Pid: 5624, comm: bash Not tainted 2.6.29-rc8-tip-02636-g6aafa6c #11 [ 169.318002] Call Trace: [ 169.318002] [<ffffffff81036182>] warn_slowpath+0xea/0x13d [ 169.318002] [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b [ 169.318002] [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b [ 169.318002] [<ffffffff8100b9d1>] ? ftrace_call+0x0/0x2b [ 169.318002] [<ffffffff8101ef10>] ? ftrace_modify_code+0xa9/0x108 [ 169.318002] [<ffffffff8106e27f>] ? trace_hardirqs_off+0x25/0x27 [ 169.318002] [<ffffffff8149afe7>] ? _spin_unlock_irqrestore+0x1f/0x2d [ 169.318002] [<ffffffff81064f52>] ? ring_buffer_reset_cpu+0xf6/0xfb [ 169.318002] [<ffffffff8106637c>] ? ring_buffer_reset+0x36/0x48 [ 169.318002] [<ffffffff8106aeda>] update_max_tr_single+0xcc/0xf3 [ 169.318002] [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d [ 169.318002] [<ffffffff8106e3ea>] stop_critical_timing+0x142/0x204 [ 169.318002] [<ffffffff8106e4cf>] trace_hardirqs_on_caller+0x23/0x25 [ 169.318002] [<ffffffff8149ac28>] trace_hardirqs_on_thunk+0x3a/0x3c [ 169.318002] [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d [ 169.318002] ---[ end trace db76cbf775a750cf ]--- Because this tracer may try to swap two cpu ring buffers for an unregistered cpu on the ring buffer. This patch might also fix a fair loss of traces due to unallocated buffers for secondary cpus. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-b: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237470453-5427-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-19 16:47:33 +03:00
/*
* In case of non-hotplug cpu, if the ring-buffer is allocated
* in early initcall, it will not be notified of secondary cpus.
* In that off case, we need to allocate for all possible cpus.
*/
#ifdef CONFIG_HOTPLUG_CPU
trace, ring-buffer: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the tracing ring-buffer code by using this latter form of callback registration. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11 00:41:56 +04:00
cpu_notifier_register_begin();
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
cpumask_copy(buffer->cpumask, cpu_online_mask);
tracing/ring-buffer: fix non cpu hotplug case Impact: fix warning with irqsoff tracer The ring buffer allocates its buffers on pre-smp time (early_initcall). It means that, at first, only the boot cpu buffer is allocated and the ring-buffer cpumask only has the boot cpu set (cpu_online_mask). Later, the secondary cpu will show up and the ring-buffer will be notified about this event: the appropriate buffer will be allocated and the cpumask will be updated. Unfortunately, if !CONFIG_CPU_HOTPLUG, the ring-buffer will not be notified about the secondary cpus, meaning that the cpumask will have only the cpu boot set, and only one cpu buffer allocated. We fix that by using cpu_possible_mask if !CONFIG_CPU_HOTPLUG. This patch fixes the following warning with irqsoff tracer running: [ 169.317794] WARNING: at kernel/trace/trace.c:466 update_max_tr_single+0xcc/0xf3() [ 169.318002] Hardware name: AMILO Li 2727 [ 169.318002] Modules linked in: [ 169.318002] Pid: 5624, comm: bash Not tainted 2.6.29-rc8-tip-02636-g6aafa6c #11 [ 169.318002] Call Trace: [ 169.318002] [<ffffffff81036182>] warn_slowpath+0xea/0x13d [ 169.318002] [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b [ 169.318002] [<ffffffff8100b9d6>] ? ftrace_call+0x5/0x2b [ 169.318002] [<ffffffff8100b9d1>] ? ftrace_call+0x0/0x2b [ 169.318002] [<ffffffff8101ef10>] ? ftrace_modify_code+0xa9/0x108 [ 169.318002] [<ffffffff8106e27f>] ? trace_hardirqs_off+0x25/0x27 [ 169.318002] [<ffffffff8149afe7>] ? _spin_unlock_irqrestore+0x1f/0x2d [ 169.318002] [<ffffffff81064f52>] ? ring_buffer_reset_cpu+0xf6/0xfb [ 169.318002] [<ffffffff8106637c>] ? ring_buffer_reset+0x36/0x48 [ 169.318002] [<ffffffff8106aeda>] update_max_tr_single+0xcc/0xf3 [ 169.318002] [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d [ 169.318002] [<ffffffff8106e3ea>] stop_critical_timing+0x142/0x204 [ 169.318002] [<ffffffff8106e4cf>] trace_hardirqs_on_caller+0x23/0x25 [ 169.318002] [<ffffffff8149ac28>] trace_hardirqs_on_thunk+0x3a/0x3c [ 169.318002] [<ffffffff8100bc17>] ? sysret_check+0x22/0x5d [ 169.318002] ---[ end trace db76cbf775a750cf ]--- Because this tracer may try to swap two cpu ring buffers for an unregistered cpu on the ring buffer. This patch might also fix a fair loss of traces due to unallocated buffers for secondary cpus. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-b: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237470453-5427-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-19 16:47:33 +03:00
#else
cpumask_copy(buffer->cpumask, cpu_possible_mask);
#endif
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
buffer->cpus = nr_cpu_ids;
bsize = sizeof(void *) * nr_cpu_ids;
buffer->buffers = kzalloc(ALIGN(bsize, cache_line_size()),
GFP_KERNEL);
if (!buffer->buffers)
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
goto fail_free_cpumask;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
for_each_buffer_cpu(buffer, cpu) {
buffer->buffers[cpu] =
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
rb_allocate_cpu_buffer(buffer, nr_pages, cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
if (!buffer->buffers[cpu])
goto fail_free_buffers;
}
ring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG The hotplug code in the ring buffers is for use with CPU hotplug, not generic hotplug. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 18:46:03 +03:00
#ifdef CONFIG_HOTPLUG_CPU
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
buffer->cpu_notify.notifier_call = rb_cpu_notify;
buffer->cpu_notify.priority = 0;
trace, ring-buffer: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the tracing ring-buffer code by using this latter form of callback registration. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11 00:41:56 +04:00
__register_cpu_notifier(&buffer->cpu_notify);
cpu_notifier_register_done();
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
#endif
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
mutex_init(&buffer->mutex);
return buffer;
fail_free_buffers:
for_each_buffer_cpu(buffer, cpu) {
if (buffer->buffers[cpu])
rb_free_cpu_buffer(buffer->buffers[cpu]);
}
kfree(buffer->buffers);
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
fail_free_cpumask:
free_cpumask_var(buffer->cpumask);
trace, ring-buffer: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the tracing ring-buffer code by using this latter form of callback registration. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11 00:41:56 +04:00
#ifdef CONFIG_HOTPLUG_CPU
cpu_notifier_register_done();
#endif
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
fail_free_buffer:
kfree(buffer);
return NULL;
}
ring-buffer: pass in lockdep class key for reader_lock On Sun, 7 Jun 2009, Ingo Molnar wrote: > Testing tracer sched_switch: <6>Starting ring buffer hammer > PASSED > Testing tracer sysprof: PASSED > Testing tracer function: PASSED > Testing tracer irqsoff: > ============================================= > PASSED > Testing tracer preemptoff: PASSED > Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ] > PASSED > Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760 > --------------------------------------------- > rb_consumer/431 is trying to acquire lock: > (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70 > > but task is already holding lock: > (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 > > other info that might help us debug this: > 1 lock held by rb_consumer/431: > #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 The ring buffer is a generic structure, and can be used outside of ftrace. If ftrace traces within the use of the ring buffer, it can produce false positives with lockdep. This patch passes in a static lock key into the allocation of the ring buffer, so that different ring buffers will have their own lock class. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1244477919.13761.9042.camel@twins> [ store key in ring buffer descriptor ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-08 20:18:39 +04:00
EXPORT_SYMBOL_GPL(__ring_buffer_alloc);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_free - free a ring buffer.
* @buffer: the buffer to free.
*/
void
ring_buffer_free(struct ring_buffer *buffer)
{
int cpu;
ring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG The hotplug code in the ring buffers is for use with CPU hotplug, not generic hotplug. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 18:46:03 +03:00
#ifdef CONFIG_HOTPLUG_CPU
trace, ring-buffer: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the tracing ring-buffer code by using this latter form of callback registration. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11 00:41:56 +04:00
cpu_notifier_register_begin();
__unregister_cpu_notifier(&buffer->cpu_notify);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
#endif
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
for_each_buffer_cpu(buffer, cpu)
rb_free_cpu_buffer(buffer->buffers[cpu]);
trace, ring-buffer: Fix CPU hotplug callback registration Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the tracing ring-buffer code by using this latter form of callback registration. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-11 00:41:56 +04:00
#ifdef CONFIG_HOTPLUG_CPU
cpu_notifier_register_done();
#endif
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
ring-buffer: Fix memleak in ring_buffer_free() I noticed oprofile memleaked in linux-2.6 current tree, and tracked this ring-buffer leak. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> LKML-Reference: <4A7C06B9.2090302@gmail.com> Cc: stable@kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-07 14:49:29 +04:00
kfree(buffer->buffers);
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
free_cpumask_var(buffer->cpumask);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
kfree(buffer);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_free);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
void ring_buffer_set_clock(struct ring_buffer *buffer,
u64 (*clock)(void))
{
buffer->clock = clock;
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
static void rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
static inline unsigned long rb_page_entries(struct buffer_page *bpage)
{
return local_read(&bpage->entries) & RB_WRITE_MASK;
}
static inline unsigned long rb_page_write(struct buffer_page *bpage)
{
return local_read(&bpage->write) & RB_WRITE_MASK;
}
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
static int
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
struct list_head *tail_page, *to_remove, *next_page;
struct buffer_page *to_remove_page, *tmp_iter_page;
struct buffer_page *last_page, *first_page;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
unsigned long nr_removed;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
unsigned long head_bit;
int page_entries;
head_bit = 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irq(&cpu_buffer->reader_lock);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
atomic_inc(&cpu_buffer->record_disabled);
/*
* We don't race with the readers since we have acquired the reader
* lock. We also don't race with writers after disabling recording.
* This makes it easy to figure out the first and the last page to be
* removed from the list. We unlink all the pages in between including
* the first and last pages. This is done in a busy loop so that we
* lose the least number of traces.
* The pages are freed after we restart recording and unlock readers.
*/
tail_page = &cpu_buffer->tail_page->list;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
/*
* tail page might be on reader page, we remove the next page
* from the ring buffer
*/
if (cpu_buffer->tail_page == cpu_buffer->reader_page)
tail_page = rb_list_head(tail_page->next);
to_remove = tail_page;
/* start of pages to remove */
first_page = list_entry(rb_list_head(to_remove->next),
struct buffer_page, list);
for (nr_removed = 0; nr_removed < nr_pages; nr_removed++) {
to_remove = rb_list_head(to_remove)->next;
head_bit |= (unsigned long)to_remove & RB_PAGE_HEAD;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
next_page = rb_list_head(to_remove)->next;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
/*
* Now we remove all pages between tail_page and next_page.
* Make sure that we have head_bit value preserved for the
* next page
*/
tail_page->next = (struct list_head *)((unsigned long)next_page |
head_bit);
next_page = rb_list_head(next_page);
next_page->prev = tail_page;
/* make sure pages points to a valid page in the ring buffer */
cpu_buffer->pages = next_page;
/* update head page */
if (head_bit)
cpu_buffer->head_page = list_entry(next_page,
struct buffer_page, list);
/*
* change read pointer to make sure any read iterators reset
* themselves
*/
cpu_buffer->read = 0;
/* pages are removed, resume tracing and then free the pages */
atomic_dec(&cpu_buffer->record_disabled);
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irq(&cpu_buffer->reader_lock);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages));
/* last buffer page to remove */
last_page = list_entry(rb_list_head(to_remove), struct buffer_page,
list);
tmp_iter_page = first_page;
do {
to_remove_page = tmp_iter_page;
rb_inc_page(cpu_buffer, &tmp_iter_page);
/* update the counters */
page_entries = rb_page_entries(to_remove_page);
if (page_entries) {
/*
* If something was added to this page, it was full
* since it is not the tail page. So we deduct the
* bytes consumed in ring buffer from here.
ring-buffer: Fix accounting of entries when removing pages When removing pages from the ring buffer, its state is not reset. This means that the counters need to be correctly updated to account for the pages removed. Update the overrun counter to reflect the removed events from the pages. Link: http://lkml.kernel.org/r/1340998301-1715-1-git-send-email-vnagarnaik@google.com Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-29 23:31:41 +04:00
* Increment overrun to account for the lost events.
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
*/
ring-buffer: Fix accounting of entries when removing pages When removing pages from the ring buffer, its state is not reset. This means that the counters need to be correctly updated to account for the pages removed. Update the overrun counter to reflect the removed events from the pages. Link: http://lkml.kernel.org/r/1340998301-1715-1-git-send-email-vnagarnaik@google.com Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-29 23:31:41 +04:00
local_add(page_entries, &cpu_buffer->overrun);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes);
}
/*
* We have already removed references to this list item, just
* free up the buffer_page and its page
*/
free_buffer_page(to_remove_page);
nr_removed--;
} while (to_remove_page != last_page);
RB_WARN_ON(cpu_buffer, nr_removed);
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
return nr_removed == 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
static int
rb_insert_pages(struct ring_buffer_per_cpu *cpu_buffer)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
struct list_head *pages = &cpu_buffer->new_pages;
int retries, success;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irq(&cpu_buffer->reader_lock);
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
/*
* We are holding the reader lock, so the reader page won't be swapped
* in the ring buffer. Now we are racing with the writer trying to
* move head page and the tail page.
* We are going to adapt the reader page update process where:
* 1. We first splice the start and end of list of new pages between
* the head page and its previous page.
* 2. We cmpxchg the prev_page->next to point from head page to the
* start of new pages list.
* 3. Finally, we update the head->prev to the end of new list.
*
* We will try this process 10 times, to make sure that we don't keep
* spinning.
*/
retries = 10;
success = 0;
while (retries--) {
struct list_head *head_page, *prev_page, *r;
struct list_head *last_page, *first_page;
struct list_head *head_page_with_bit;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
head_page = &rb_set_head_page(cpu_buffer)->list;
ring-buffer: Fix NULL pointer if rb_set_head_page() fails The function rb_set_head_page() searches the list of ring buffer pages for a the page that has the HEAD page flag set. If it does not find it, it will do a WARN_ON(), disable the ring buffer and return NULL, as this should never happen. But if this bug happens to happen, not all callers of this function can handle a NULL pointer being returned from it. That needs to be fixed. Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:27:22 +04:00
if (!head_page)
break;
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
prev_page = head_page->prev;
first_page = pages->next;
last_page = pages->prev;
head_page_with_bit = (struct list_head *)
((unsigned long)head_page | RB_PAGE_HEAD);
last_page->next = head_page_with_bit;
first_page->prev = prev_page;
r = cmpxchg(&prev_page->next, head_page_with_bit, first_page);
if (r == head_page_with_bit) {
/*
* yay, we replaced the page pointer to our new list,
* now, we just have to update to head page's prev
* pointer to point to end of list
*/
head_page->prev = last_page;
success = 1;
break;
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
if (success)
INIT_LIST_HEAD(pages);
/*
* If we weren't successful in adding in new pages, warn and stop
* tracing
*/
RB_WARN_ON(cpu_buffer, !success);
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irq(&cpu_buffer->reader_lock);
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
/* free pages if they weren't inserted */
if (!success) {
struct buffer_page *bpage, *tmp;
list_for_each_entry_safe(bpage, tmp, &cpu_buffer->new_pages,
list) {
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
}
return success;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
static void rb_update_pages(struct ring_buffer_per_cpu *cpu_buffer)
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
{
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
int success;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
if (cpu_buffer->nr_pages_to_update > 0)
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
success = rb_insert_pages(cpu_buffer);
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
else
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
success = rb_remove_pages(cpu_buffer,
-cpu_buffer->nr_pages_to_update);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
if (success)
cpu_buffer->nr_pages += cpu_buffer->nr_pages_to_update;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
}
static void update_pages_handler(struct work_struct *work)
{
struct ring_buffer_per_cpu *cpu_buffer = container_of(work,
struct ring_buffer_per_cpu, update_pages_work);
rb_update_pages(cpu_buffer);
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
complete(&cpu_buffer->update_done);
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_resize - resize the ring buffer
* @buffer: the buffer to resize.
* @size: the new size.
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* @cpu_id: the cpu buffer to resize
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*
* Minimum size is 2 * BUF_PAGE_SIZE.
*
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
* Returns 0 on success and < 0 on failure.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size,
int cpu_id)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
unsigned long nr_pages;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
int cpu, err = 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing: fix mmiotrace resizing crash Pekka reported a crash when resizing the mmiotrace tracer (if only mmiotrace is enabled). This happens because in that case we do not allocate the max buffer, but we try to use it. Make ring_buffer_resize() idempotent against NULL buffers. Reported-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-13 16:58:31 +03:00
/*
* Always succeed at resizing a non-existent buffer:
*/
if (!buffer)
return size;
ring-buffer: Check for valid buffer before changing size On some machines the number of possible CPUS is not the same as the number of CPUs that is on the machine. Ftrace uses possible_cpus to update the tracing structures but the ring buffer only allocates per cpu buffers for online CPUs when they come up. When the wakeup tracer was enabled in such a case, the ftrace code enabled all possible cpu buffers, but the code in ring_buffer_resize() did not check to see if the buffer in question was allocated. Since boot up CPUs did not match possible CPUs it caused the following crash: BUG: unable to handle kernel NULL pointer dereference at 00000020 IP: [<c1097851>] ring_buffer_resize+0x16a/0x28d *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: [last unloaded: scsi_wait_scan] Pid: 1387, comm: bash Not tainted 3.4.0-test+ #13 /DG965MQ EIP: 0060:[<c1097851>] EFLAGS: 00010217 CPU: 0 EIP is at ring_buffer_resize+0x16a/0x28d EAX: f5a14340 EBX: f6026b80 ECX: 00000ff4 EDX: 00000ff3 ESI: 00000000 EDI: 00000002 EBP: f4275ecc ESP: f4275eb0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 80050033 CR2: 00000020 CR3: 34396000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process bash (pid: 1387, ti=f4274000 task=f4380cb0 task.ti=f4274000) Stack: c109cf9a f6026b98 00000162 00160f68 00000006 00160f68 00000002 f4275ef0 c109d013 f4275ee8 c123b72a c1c0bf00 c1cc81dc 00000005 f4275f98 00000007 f4275f70 c109d0c7 7700000e 75656b61 00000070 f5e90900 f5c4e198 00000301 Call Trace: [<c109cf9a>] ? tracing_set_tracer+0x115/0x1e9 [<c109d013>] tracing_set_tracer+0x18e/0x1e9 [<c123b72a>] ? _copy_from_user+0x30/0x46 [<c109d0c7>] tracing_set_trace_write+0x59/0x7f [<c10ec01e>] ? fput+0x18/0x1c6 [<c11f8732>] ? security_file_permission+0x27/0x2b [<c10eaacd>] ? rw_verify_area+0xcf/0xf2 [<c10ec01e>] ? fput+0x18/0x1c6 [<c109d06e>] ? tracing_set_tracer+0x1e9/0x1e9 [<c10ead77>] vfs_write+0x8b/0xe3 [<c10ebead>] ? fget_light+0x30/0x81 [<c10eaf54>] sys_write+0x42/0x63 [<c1834fbf>] sysenter_do_call+0x12/0x28 This happens with the latency tracer as the ftrace code updates the saved max buffer via its cpumask and not with a global setting. Adding a check in ring_buffer_resize() to make sure the buffer being resized exists, fixes the problem. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-23 23:35:17 +04:00
/* Make sure the requested buffer exists */
if (cpu_id != RING_BUFFER_ALL_CPUS &&
!cpumask_test_cpu(cpu_id, buffer->cpumask))
return size;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
size = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
size *= BUF_PAGE_SIZE;
/* we need a minimum of two pages */
if (size < BUF_PAGE_SIZE * 2)
size = BUF_PAGE_SIZE * 2;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
ring-buffer: Use sync sched protection on ring buffer resizing There was a comment in the ring buffer code that says the calling layers should prevent tracing or reading of the ring buffer while resizing. I have discovered that the tracers do not honor this arrangement. This patch moves the disabling and synchronizing the ring buffer to a higher layer during resizing. This guarantees that no writes are occurring while the resize takes place. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-11 06:54:27 +03:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
/*
* Don't succeed if resizing is disabled, as a reader might be
* manipulating the ring buffer and is expecting a sane state while
* this is true.
*/
if (atomic_read(&buffer->resize_disabled))
return -EBUSY;
ring-buffer: Use sync sched protection on ring buffer resizing There was a comment in the ring buffer code that says the calling layers should prevent tracing or reading of the ring buffer while resizing. I have discovered that the tracers do not honor this arrangement. This patch moves the disabling and synchronizing the ring buffer to a higher layer during resizing. This guarantees that no writes are occurring while the resize takes place. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-11 06:54:27 +03:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
/* prevent another thread from changing buffer sizes */
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
mutex_lock(&buffer->mutex);
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
if (cpu_id == RING_BUFFER_ALL_CPUS) {
/* calculate the pages to update */
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_buffer->nr_pages_to_update = nr_pages -
cpu_buffer->nr_pages;
/*
* nothing more to do for removing pages or no update
*/
if (cpu_buffer->nr_pages_to_update <= 0)
continue;
ring-buffer: Set __GFP_NORETRY flag for ring buffer allocating process The tracing ring buffer is allocated from kernel memory. While allocating a large chunk of memory, OOM might happen which destabilizes the system. Thus random processes might get killed during the allocation. This patch adds __GFP_NORETRY flag to the ring buffer allocation calls to make it fail more gracefully if the system will not be able to complete the allocation request. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-08 04:01:42 +04:00
/*
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
* to add pages, make sure all new pages can be
* allocated without receiving ENOMEM
ring-buffer: Set __GFP_NORETRY flag for ring buffer allocating process The tracing ring buffer is allocated from kernel memory. While allocating a large chunk of memory, OOM might happen which destabilizes the system. Thus random processes might get killed during the allocation. This patch adds __GFP_NORETRY flag to the ring buffer allocation calls to make it fail more gracefully if the system will not be able to complete the allocation request. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-08 04:01:42 +04:00
*/
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
INIT_LIST_HEAD(&cpu_buffer->new_pages);
if (__rb_allocate_pages(cpu_buffer->nr_pages_to_update,
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
&cpu_buffer->new_pages, cpu)) {
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
/* not enough memory for new pages */
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
err = -ENOMEM;
goto out_err;
}
}
get_online_cpus();
/*
* Fire off all the required work handlers
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
* We can't schedule on offline CPUs, but it's not necessary
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
* since we can change their buffer sizes without any race.
*/
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
if (!cpu_buffer->nr_pages_to_update)
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
continue;
ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() The code for resizing the trace ring buffers has to run the per-cpu resize on the CPU itself. The code was using preempt_off() and running the code for the current CPU directly, otherwise calling schedule_work_on(). At least on RT this could result in the following: |BUG: sleeping function called from invalid context at kernel/rtmutex.c:673 |in_atomic(): 1, irqs_disabled(): 0, pid: 607, name: bash |3 locks held by bash/607: |CPU: 0 PID: 607 Comm: bash Not tainted 3.12.15-rt25+ #124 |(rt_spin_lock+0x28/0x68) |(free_hot_cold_page+0x84/0x3b8) |(free_buffer_page+0x14/0x20) |(rb_update_pages+0x280/0x338) |(ring_buffer_resize+0x32c/0x3dc) |(free_snapshot+0x18/0x38) |(tracing_set_tracer+0x27c/0x2ac) probably via |cd /sys/kernel/debug/tracing/ |echo 1 > events/enable ; sleep 2 |echo 1024 > buffer_size_kb If we just always use schedule_work_on(), there's no need for the preempt_off(). So do that. Link: http://lkml.kernel.org/p/1405537633-31518-1-git-send-email-cminyard@mvista.com Reported-by: Stanislav Meduna <stano@meduna.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-16 23:07:13 +04:00
/* Can't run something on an offline CPU. */
if (!cpu_online(cpu)) {
ring-buffer: Do not use schedule_work_on() for current CPU The ring buffer updates when done while the ring buffer is active, needs to be completed on the CPU that is used for the ring buffer per_cpu buffer. To accomplish this, schedule_work_on() is used to schedule work on the given CPU. Now there's no reason to use schedule_work_on() if the process doing the update happens to be on the CPU that it is processing. It has already filled the requirement. Instead, just do the work and continue. This is needed for tracing_snapshot_alloc() where it may be called really early in boot, where the work queues have not been set up yet. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-07 18:27:42 +04:00
rb_update_pages(cpu_buffer);
cpu_buffer->nr_pages_to_update = 0;
} else {
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
schedule_work_on(cpu,
&cpu_buffer->update_pages_work);
ring-buffer: Do not use schedule_work_on() for current CPU The ring buffer updates when done while the ring buffer is active, needs to be completed on the CPU that is used for the ring buffer per_cpu buffer. To accomplish this, schedule_work_on() is used to schedule work on the given CPU. Now there's no reason to use schedule_work_on() if the process doing the update happens to be on the CPU that it is processing. It has already filled the requirement. Instead, just do the work and continue. This is needed for tracing_snapshot_alloc() where it may be called really early in boot, where the work queues have not been set up yet. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-07 18:27:42 +04:00
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
/* wait for all the updates to complete */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
if (!cpu_buffer->nr_pages_to_update)
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
continue;
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
if (cpu_online(cpu))
wait_for_completion(&cpu_buffer->update_done);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
cpu_buffer->nr_pages_to_update = 0;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
}
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
put_online_cpus();
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
} else {
ring-buffer: Check for uninitialized cpu buffer before resizing With a system where, num_present_cpus < num_possible_cpus, even if all CPUs are online, non-present CPUs don't have per_cpu buffers allocated. If per_cpu/<cpu>/buffer_size_kb is modified for such a CPU, it can cause a panic due to NULL dereference in ring_buffer_resize(). To fix this, resize operation is allowed only if the per-cpu buffer has been initialized. Link: http://lkml.kernel.org/r/1349912427-6486-1-git-send-email-vnagarnaik@google.com Cc: stable@vger.kernel.org # 3.5+ Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-11 03:40:27 +04:00
/* Make sure this CPU has been intitialized */
if (!cpumask_test_cpu(cpu_id, buffer->cpumask))
goto out;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_buffer = buffer->buffers[cpu_id];
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
if (nr_pages == cpu_buffer->nr_pages)
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_buffer->nr_pages_to_update = nr_pages -
cpu_buffer->nr_pages;
INIT_LIST_HEAD(&cpu_buffer->new_pages);
if (cpu_buffer->nr_pages_to_update > 0 &&
__rb_allocate_pages(cpu_buffer->nr_pages_to_update,
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
&cpu_buffer->new_pages, cpu_id)) {
err = -ENOMEM;
goto out_err;
}
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
get_online_cpus();
ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on() The code for resizing the trace ring buffers has to run the per-cpu resize on the CPU itself. The code was using preempt_off() and running the code for the current CPU directly, otherwise calling schedule_work_on(). At least on RT this could result in the following: |BUG: sleeping function called from invalid context at kernel/rtmutex.c:673 |in_atomic(): 1, irqs_disabled(): 0, pid: 607, name: bash |3 locks held by bash/607: |CPU: 0 PID: 607 Comm: bash Not tainted 3.12.15-rt25+ #124 |(rt_spin_lock+0x28/0x68) |(free_hot_cold_page+0x84/0x3b8) |(free_buffer_page+0x14/0x20) |(rb_update_pages+0x280/0x338) |(ring_buffer_resize+0x32c/0x3dc) |(free_snapshot+0x18/0x38) |(tracing_set_tracer+0x27c/0x2ac) probably via |cd /sys/kernel/debug/tracing/ |echo 1 > events/enable ; sleep 2 |echo 1024 > buffer_size_kb If we just always use schedule_work_on(), there's no need for the preempt_off(). So do that. Link: http://lkml.kernel.org/p/1405537633-31518-1-git-send-email-cminyard@mvista.com Reported-by: Stanislav Meduna <stano@meduna.org> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-16 23:07:13 +04:00
/* Can't run something on an offline CPU. */
if (!cpu_online(cpu_id))
ring-buffer: Do not use schedule_work_on() for current CPU The ring buffer updates when done while the ring buffer is active, needs to be completed on the CPU that is used for the ring buffer per_cpu buffer. To accomplish this, schedule_work_on() is used to schedule work on the given CPU. Now there's no reason to use schedule_work_on() if the process doing the update happens to be on the CPU that it is processing. It has already filled the requirement. Instead, just do the work and continue. This is needed for tracing_snapshot_alloc() where it may be called really early in boot, where the work queues have not been set up yet. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-07 18:27:42 +04:00
rb_update_pages(cpu_buffer);
else {
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
schedule_work_on(cpu_id,
&cpu_buffer->update_pages_work);
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
wait_for_completion(&cpu_buffer->update_done);
ring-buffer: Do not use schedule_work_on() for current CPU The ring buffer updates when done while the ring buffer is active, needs to be completed on the CPU that is used for the ring buffer per_cpu buffer. To accomplish this, schedule_work_on() is used to schedule work on the given CPU. Now there's no reason to use schedule_work_on() if the process doing the update happens to be on the CPU that it is processing. It has already filled the requirement. Instead, just do the work and continue. This is needed for tracing_snapshot_alloc() where it may be called really early in boot, where the work queues have not been set up yet. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-07 18:27:42 +04:00
}
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
cpu_buffer->nr_pages_to_update = 0;
ring-buffer: Merge separate resize loops There are 2 separate loops to resize cpu buffers that are online and offline. Merge them to make the code look better. Also change the name from update_completion to update_done to allow shorter lines. Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-19 00:29:51 +04:00
put_online_cpus();
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
out:
ring-buffer: Add integrity check at end of iter read There use to be ring buffer integrity checks after updating the size of the ring buffer. But now that the ring buffer can modify the size while the system is running, the integrity checks were removed, as they require the ring buffer to be disabed to perform the check. Move the integrity check to the reading of the ring buffer via the iterator reads (the "trace" file). As reading via an iterator requires disabling the ring buffer, it is a perfect place to have it. If the ring buffer happens to be disabled when updating the size, we still perform the integrity check. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-15 01:02:33 +04:00
/*
* The ring buffer resize can happen with the ring buffer
* enabled, so that the update disturbs the tracing as little
* as possible. But if the buffer is disabled, we do not need
* to worry about that, and we can take the time to verify
* that the buffer is not corrupt.
*/
if (atomic_read(&buffer->record_disabled)) {
atomic_inc(&buffer->record_disabled);
/*
* Even though the buffer was disabled, we must make sure
* that it is truly disabled before calling rb_check_pages.
* There could have been a race between checking
* record_disable and incrementing it.
*/
synchronize_sched();
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
rb_check_pages(cpu_buffer);
}
atomic_dec(&buffer->record_disabled);
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
mutex_unlock(&buffer->mutex);
return size;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
out_err:
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
for_each_buffer_cpu(buffer, cpu) {
struct buffer_page *bpage, *tmp;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_buffer = buffer->buffers[cpu];
cpu_buffer->nr_pages_to_update = 0;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
if (list_empty(&cpu_buffer->new_pages))
continue;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
list_for_each_entry_safe(bpage, tmp, &cpu_buffer->new_pages,
list) {
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
trace: introduce missing mutex_unlock() Impact: fix tracing buffer mutex leak in case of allocation failure This error was spotted by this semantic patch: http://www.emn.fr/x-info/coccinelle/mut.html It looks correct as far as I can tell. Please review. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18 21:22:13 +03:00
mutex_unlock(&buffer->mutex);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
return err;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_resize);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing: Add an 'overwrite' trace_option. Add an "overwrite" trace_option for ftrace to control whether the buffer should be overwritten on overflow or not. The default remains to overwrite old events when the buffer is full. This patch adds the option to instead discard newest events when the buffer is full. This is useful to get a snapshot of traces just after enabling traces. Dropping the current event is also a simpler code path. Signed-off-by: David Sharp <dhsharp@google.com> LKML-Reference: <1291844807-15481-1-git-send-email-dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-12-09 00:46:47 +03:00
void ring_buffer_change_overwrite(struct ring_buffer *buffer, int val)
{
mutex_lock(&buffer->mutex);
if (val)
buffer->flags |= RB_FL_OVERWRITE;
else
buffer->flags &= ~RB_FL_OVERWRITE;
mutex_unlock(&buffer->mutex);
}
EXPORT_SYMBOL_GPL(ring_buffer_change_overwrite);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
static inline void *
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
__rb_data_page_index(struct buffer_data_page *bpage, unsigned index)
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
{
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
return bpage->data + index;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
}
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
static inline void *__rb_page_index(struct buffer_page *bpage, unsigned index)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
return bpage->page->data + index;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
static inline struct ring_buffer_event *
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
rb_reader_event(struct ring_buffer_per_cpu *cpu_buffer)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
return __rb_page_index(cpu_buffer->reader_page,
cpu_buffer->reader_page->read);
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
static inline struct ring_buffer_event *
rb_iter_head_event(struct ring_buffer_iter *iter)
{
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
return __rb_page_index(iter->head_page, iter->head);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
static inline unsigned rb_page_commit(struct buffer_page *bpage)
{
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
return local_read(&bpage->page->commit);
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
}
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 05:57:33 +04:00
/* Size is determined by what has been committed */
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
static inline unsigned rb_page_size(struct buffer_page *bpage)
{
return rb_page_commit(bpage);
}
static inline unsigned
rb_commit_index(struct ring_buffer_per_cpu *cpu_buffer)
{
return rb_page_commit(cpu_buffer->commit_page);
}
static inline unsigned
rb_event_index(struct ring_buffer_event *event)
{
unsigned long addr = (unsigned long)event;
ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index The index of the event is found by masking PAGE_MASK to it and subtracting the header size. Currently the header size is calculate by PAGE_SIZE - BUF_PAGE_SIZE, when we already have a macro BUF_PAGE_HDR_SIZE to define it. If we want to change BUF_PAGE_SIZE to something less than filling the rest of the page (this is done for debugging), then we break the algorithm to find the index. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 17:29:58 +04:00
return (addr & ~PAGE_MASK) - BUF_PAGE_HDR_SIZE;
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
}
kernel/trace/ring_buffer.c: reduce inlining text data bss dec hex filename before: 11320 228 8 11556 2d24 kernel/trace/ring_buffer.o after: 10592 228 8 10828 2a4c kernel/trace/ring_buffer.o Also: free_page(0) is legal. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 23:27:09 +03:00
static void rb_inc_iter(struct ring_buffer_iter *iter)
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
/*
* The iterator could be on the reader page (it starts there).
* But the head could have moved, since the reader was
* found. Check for this case and assign the iterator
* to the head page instead of next.
*/
if (iter->head_page == cpu_buffer->reader_page)
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
iter->head_page = rb_set_head_page(cpu_buffer);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
else
rb_inc_page(cpu_buffer, &iter->head_page);
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
iter->read_stamp = iter->head_page->page->time_stamp;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
iter->head = 0;
}
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* rb_handle_head_page - writer hit the head page
*
* Returns: +1 to retry page
* 0 to continue
* -1 on error
*/
static int
rb_handle_head_page(struct ring_buffer_per_cpu *cpu_buffer,
struct buffer_page *tail_page,
struct buffer_page *next_page)
{
struct buffer_page *new_head;
int entries;
int type;
int ret;
entries = rb_page_entries(next_page);
/*
* The hard part is here. We need to move the head
* forward, and protect against both readers on
* other CPUs and writers coming in via interrupts.
*/
type = rb_head_page_set_update(cpu_buffer, next_page, tail_page,
RB_PAGE_HEAD);
/*
* type can be one of four:
* NORMAL - an interrupt already moved it for us
* HEAD - we are the first to get here.
* UPDATE - we are the interrupt interrupting
* a current move.
* MOVED - a reader on another CPU moved the next
* pointer to its reader page. Give up
* and try again.
*/
switch (type) {
case RB_PAGE_HEAD:
/*
* We changed the head to UPDATE, thus
* it is our responsibility to update
* the counters.
*/
local_add(entries, &cpu_buffer->overrun);
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* The entries will be zeroed out when we move the
* tail page.
*/
/* still more to do */
break;
case RB_PAGE_UPDATE:
/*
* This is an interrupt that interrupt the
* previous update. Still more to do.
*/
break;
case RB_PAGE_NORMAL:
/*
* An interrupt came in before the update
* and processed this for us.
* Nothing left to do.
*/
return 1;
case RB_PAGE_MOVED:
/*
* The reader is on another CPU and just did
* a swap with our next_page.
* Try again.
*/
return 1;
default:
RB_WARN_ON(cpu_buffer, 1); /* WTF??? */
return -1;
}
/*
* Now that we are here, the old head pointer is
* set to UPDATE. This will keep the reader from
* swapping the head page with the reader page.
* The reader (on another CPU) will spin till
* we are finished.
*
* We just need to protect against interrupts
* doing the job. We will set the next pointer
* to HEAD. After that, we set the old pointer
* to NORMAL, but only if it was HEAD before.
* otherwise we are an interrupt, and only
* want the outer most commit to reset it.
*/
new_head = next_page;
rb_inc_page(cpu_buffer, &new_head);
ret = rb_head_page_set_head(cpu_buffer, new_head, next_page,
RB_PAGE_NORMAL);
/*
* Valid returns are:
* HEAD - an interrupt came in and already set it.
* NORMAL - One of two things:
* 1) We really set it.
* 2) A bunch of interrupts came in and moved
* the page forward again.
*/
switch (ret) {
case RB_PAGE_HEAD:
case RB_PAGE_NORMAL:
/* OK */
break;
default:
RB_WARN_ON(cpu_buffer, 1);
return -1;
}
/*
* It is possible that an interrupt came in,
* set the head up, then more interrupts came in
* and moved it again. When we get back here,
* the page would have been set to NORMAL but we
* just set it back to HEAD.
*
* How do you detect this? Well, if that happened
* the tail page would have moved.
*/
if (ret == RB_PAGE_NORMAL) {
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
struct buffer_page *buffer_tail_page;
buffer_tail_page = READ_ONCE(cpu_buffer->tail_page);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* If the tail had moved passed next, then we need
* to reset the pointer.
*/
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
if (buffer_tail_page != tail_page &&
buffer_tail_page != next_page)
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_set_normal(cpu_buffer, new_head,
next_page,
RB_PAGE_HEAD);
}
/*
* If this was the outer most commit (the one that
* changed the original pointer from HEAD to UPDATE),
* then it is up to us to reset it to NORMAL.
*/
if (type == RB_PAGE_HEAD) {
ret = rb_head_page_set_normal(cpu_buffer, next_page,
tail_page,
RB_PAGE_UPDATE);
if (RB_WARN_ON(cpu_buffer,
ret != RB_PAGE_UPDATE))
return -1;
}
return 0;
}
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
static inline void
rb_reset_tail(struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
unsigned long tail, struct rb_event_info *info)
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
{
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
struct buffer_page *tail_page = info->tail_page;
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
struct ring_buffer_event *event;
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
unsigned long length = info->length;
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
/*
* Only the event that crossed the page boundary
* must fill the old tail_page with padding.
*/
if (tail >= BUF_PAGE_SIZE) {
ring-buffer: Reset "real_end" when page is filled The code to store the "lost events" requires knowing the real end of the page. Since the 'commit' includes the padding at the end of a page a "real_end" variable was used to keep track of the end not including the padding. If events were lost, the reader can place the count of events in the padded area if there is enough room. The bug this patch fixes is that when we fill the page we do not reset the real_end variable, and if the writer had wrapped a few times, the real_end would be incorrect. This patch simply resets the real_end if the page was filled. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 19:55:21 +04:00
/*
* If the page was filled, then we still need
* to update the real_end. Reset it to zero
* and the reader will ignore it.
*/
if (tail == BUF_PAGE_SIZE)
tail_page->real_end = 0;
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
local_sub(length, &tail_page->write);
return;
}
event = __rb_page_index(tail_page, tail);
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits) tracing/urgent: warn in case of ftrace_start_up inbalance tracing/urgent: fix unbalanced ftrace_start_up function-graph: add stack frame test function-graph: disable when both x86_32 and optimize for size are configured ring-buffer: have benchmark test print to trace buffer ring-buffer: do not grab locks in nmi ring-buffer: add locks around rb_per_cpu_empty ring-buffer: check for less than two in size allocation ring-buffer: remove useless compile check for buffer_page size ring-buffer: remove useless warn on check ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index tracing: update sample event documentation tracing/filters: fix race between filter setting and module unload tracing/filters: free filter_string in destroy_preds() ring-buffer: use commit counters for commit pointer accounting ring-buffer: remove unused variable ring-buffer: have benchmark test handle discarded events ring-buffer: prevent adding write in discarded area tracing/filters: strloc should be unsigned short tracing/filters: operand can be negative ... Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
2009-06-20 21:56:46 +04:00
kmemcheck_annotate_bitfield(event, bitfield);
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
/* account for padding bytes */
local_add(BUF_PAGE_SIZE - tail, &cpu_buffer->entries_bytes);
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
/*
* Save the original length to the meta data.
* This will be used by the reader to add lost event
* counter.
*/
tail_page->real_end = tail;
ring-buffer: prevent adding write in discarded area This a very tight race where an interrupt could come in and not have enough data to put into the end of a buffer page, and that it would fail to write and need to go to the next page. But if this happened when another writer was about to reserver their data, and that writer has smaller data to reserve, then it could succeed even though the interrupt moved the tail page. To pervent that, if we fail to store data, and by subtracting the amount we reserved we still have room for smaller data, we need to fill that space with "discarded" data. [ Impact: prevent race were buffer data may be lost ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-11 19:12:00 +04:00
/*
* If this event is bigger than the minimum size, then
* we need to be careful that we don't subtract the
* write counter enough to allow another writer to slip
* in on this page.
* We put in a discarded commit instead, to make sure
* that this space is not used again.
*
* If we are less than the minimum size, we don't need to
* worry about it.
*/
if (tail > (BUF_PAGE_SIZE - RB_EVNT_MIN_SIZE)) {
/* No room for any events */
/* Mark the rest of the page with padding */
rb_event_set_padding(event);
/* Set the write back to the previous setting */
local_sub(length, &tail_page->write);
return;
}
/* Put in a discarded event */
event->array[0] = (BUF_PAGE_SIZE - tail) - RB_EVNT_HDR_SIZE;
event->type_len = RINGBUF_TYPE_PADDING;
/* time delta must be non zero */
event->time_delta = 1;
/* Set write to end of buffer */
length = (tail + length) - BUF_PAGE_SIZE;
local_sub(length, &tail_page->write);
}
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
ring-buffer: Process commits whenever moving to a new page. When crossing over to a new page, commit the current work. This will allow readers to get data with less latency, and also simplifies the work to get timestamps working for interrupted events. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-18 00:36:06 +03:00
static inline void rb_end_commit(struct ring_buffer_per_cpu *cpu_buffer);
ring-buffer: Make write slow path out of line Gcc inlines the slow path of the ring buffer write which can hurt performance. This patch simply forces the slow path function rb_move_tail() to always be a function. The ring_buffer_benchmark module with reader_disabled=1 shows that this patch changes the time to record an event from 135 ns to 132 ns. (3 ns or 2.22% improvement) Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 21:51:48 +04:00
/*
* This is the slow path, force gcc not to inline it.
*/
static noinline struct ring_buffer_event *
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
unsigned long tail, struct rb_event_info *info)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
struct buffer_page *tail_page = info->tail_page;
ring-buffer: Move access to commit_page up into function used With the change of the way we process commits. Where a commit only happens at the outer most level, and that we don't need to worry about a commit ending after the rb_start_commit() has been called, the code use to grab the commit page before the tail page to prevent a possible race. But this race no longer exists with the rb_start_commit() rb_end_commit() interface. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-17 16:43:01 +03:00
struct buffer_page *commit_page = cpu_buffer->commit_page;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
struct ring_buffer *buffer = cpu_buffer->buffer;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
struct buffer_page *next_page;
int ret;
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
next_page = tail_page;
rb_inc_page(cpu_buffer, &next_page);
/*
* If for some reason, we had an interrupt storm that made
* it all the way around the buffer, bail, and warn
* about it.
*/
if (unlikely(next_page == commit_page)) {
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
local_inc(&cpu_buffer->commit_overrun);
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
goto out_reset;
}
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* This is where the fun begins!
*
* We are fighting against races between a reader that
* could be on another CPU trying to swap its reader
* page with the buffer head.
*
* We are also fighting against interrupts coming in and
* moving the head or tail on us as well.
*
* If the next page is the head page then we have filled
* the buffer, unless the commit page is still on the
* reader page.
*/
if (rb_is_head_page(cpu_buffer, next_page, &tail_page->list)) {
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* If the commit is not on the reader page, then
* move the header page.
*/
if (!rb_is_reader_page(cpu_buffer->commit_page)) {
/*
* If we are not in overwrite mode,
* this is easy, just stop here.
*/
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
if (!(buffer->flags & RB_FL_OVERWRITE)) {
local_inc(&cpu_buffer->dropped_events);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
goto out_reset;
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
}
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ret = rb_handle_head_page(cpu_buffer,
tail_page,
next_page);
if (ret < 0)
goto out_reset;
if (ret)
goto out_again;
} else {
/*
* We need to be careful here too. The
* commit page could still be on the reader
* page. We could have a small buffer, and
* have filled up the buffer with events
* from interrupts and such, and wrapped.
*
* Note, if the tail page is also the on the
* reader_page, we let it move out.
*/
if (unlikely((cpu_buffer->commit_page !=
cpu_buffer->tail_page) &&
(cpu_buffer->commit_page ==
cpu_buffer->reader_page))) {
local_inc(&cpu_buffer->commit_overrun);
goto out_reset;
}
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
}
}
ring-buffer: Remove redundant update of page timestamp The first commit of a buffer page updates the timestamp of that page. No need to have the update to the next page add the timestamp too. It will only be replaced by the first commit on that page anyway. Only update to a page if it contains an event. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 23:15:19 +03:00
rb_tail_page_update(cpu_buffer, tail_page, next_page);
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
out_again:
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
rb_reset_tail(cpu_buffer, tail, info);
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
ring-buffer: Process commits whenever moving to a new page. When crossing over to a new page, commit the current work. This will allow readers to get data with less latency, and also simplifies the work to get timestamps working for interrupted events. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-18 00:36:06 +03:00
/* Commit what we have for now. */
rb_end_commit(cpu_buffer);
/* rb_end_commit() decs committing */
local_inc(&cpu_buffer->committing);
ring-buffer: move big if statement down In the hot path of the ring buffer "__rb_reserve_next" there's a big if statement that does not even return back to the work flow. code; if (cross to next page) { [ lots of code ] return; } more code; The condition is even the unlikely path, although we do not denote it with an unlikely because gcc is fine with it. The condition is true when the write crosses a page boundary, and we need to start at a new page. Having this if statement makes it hard to read, but calling another function to do the work is also not appropriate, because we are using a lot of variables that were set before the if statement, and we do not want to send them as parameters. This patch changes it to a goto: code; if (cross to next page) goto next_page; more code; return; next_page: [ lots of code] This makes the code easier to understand, and a bit more obvious. The output from gcc is practically identical. For some reason, gcc decided to use different registers when I switched it to a goto. But other than that, the logic is the same. [ Impact: easier to read code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 05:16:11 +04:00
/* fail and let the caller try again */
return ERR_PTR(-EAGAIN);
ring-buffer: rename label out_unlock to out_reset Impact: clean up While reviewing the ring buffer code, I thougth I saw a bug with if (!__raw_spin_trylock(&cpu_buffer->lock)) goto out_unlock; But I forgot that we use a variable "lock_taken" that is set if the spinlock is taken, and only unlock it if that variable is set. To avoid further confusion from other reviewers, this patch renames the label out_unlock with out_reset, which is the more appropriate name. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-12 21:19:48 +03:00
out_reset:
ring_buffer: reset write when reserve buffer fail Impact: reset struct buffer_page.write when interrupt storm if struct buffer_page.write is not reset, any succedent committing will corrupted ring_buffer: static inline void rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) { ...... cpu_buffer->commit_page->commit = cpu_buffer->commit_page->write; ...... } when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer is disabled, but some reserved buffers may haven't been committed. we need reset struct buffer_page.write. when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer is still available, we should not corrupt it. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 06:06:18 +03:00
/* reset write */
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
rb_reset_tail(cpu_buffer, tail, info);
ring_buffer: reset write when reserve buffer fail Impact: reset struct buffer_page.write when interrupt storm if struct buffer_page.write is not reset, any succedent committing will corrupted ring_buffer: static inline void rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer) { ...... cpu_buffer->commit_page->commit = cpu_buffer->commit_page->write; ...... } when "if (RB_WARN_ON(cpu_buffer, next_page == reader_page))", ring_buffer is disabled, but some reserved buffers may haven't been committed. we need reset struct buffer_page.write. when "if (unlikely(next_page == cpu_buffer->commit_page))", ring_buffer is still available, we should not corrupt it. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12 06:06:18 +03:00
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
return NULL;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
/* Slow path, do not inline */
static noinline struct ring_buffer_event *
rb_add_time_stamp(struct ring_buffer_event *event, u64 delta)
ring-buffer: Move the adding of the extended timestamp out of line Requiring a extended time stamp is an uncommon occurrence, and it is best to do it out of line when needed. Add a noinline function that handles the extended timestamp and have it called with an unlikely to completely move it out of the fast path. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:36:45 +03:00
{
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
event->type_len = RINGBUF_TYPE_TIME_EXTEND;
ring-buffer: Move the adding of the extended timestamp out of line Requiring a extended time stamp is an uncommon occurrence, and it is best to do it out of line when needed. Add a noinline function that handles the extended timestamp and have it called with an unlikely to completely move it out of the fast path. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:36:45 +03:00
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
/* Not the first event on the page? */
if (rb_event_index(event)) {
event->time_delta = delta & TS_MASK;
event->array[0] = delta >> TS_SHIFT;
} else {
/* nope, just zero it */
event->time_delta = 0;
event->array[0] = 0;
}
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
return skip_time_extend(event);
}
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
ring-buffer: rb_event_is_commit() can return boolean Make rb_event_is_commit() return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-7-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:34 +03:00
static inline bool rb_event_is_commit(struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
struct ring_buffer_event *event);
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
/**
* rb_update_event - update event type and data
* @event: the event to update
* @type: the type of event
* @length: the size of the event field in the ring buffer
*
* Update the type and data fields of the event. The length
* is the actual size that is written to the ring buffer,
* and with this, we can determine what to place into the
* data field.
*/
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
static void
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
rb_update_event(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event,
struct rb_event_info *info)
{
unsigned length = info->length;
u64 delta = info->delta;
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
/* Only a commit updates the timestamp */
if (unlikely(!rb_event_is_commit(cpu_buffer, event)))
delta = 0;
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
/*
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
* If we need to add a timestamp, then we
* add it to the start of the resevered space.
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
*/
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
if (unlikely(info->add_timestamp)) {
event = rb_add_time_stamp(event, delta);
length -= RB_LEN_TIME_EXTEND;
delta = 0;
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
}
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
event->time_delta = delta;
length -= RB_EVNT_HDR_SIZE;
if (length > RB_MAX_SMALL_DATA || RB_FORCE_8BYTE_ALIGNMENT) {
event->type_len = 0;
event->array[0] = length;
} else
event->type_len = DIV_ROUND_UP(length, RB_ALIGNMENT);
}
static unsigned rb_calculate_event_length(unsigned length)
{
struct ring_buffer_event event; /* Used only for sizeof array */
/* zero length can cause confusions */
if (!length)
length++;
if (length > RB_MAX_SMALL_DATA || RB_FORCE_8BYTE_ALIGNMENT)
length += sizeof(event.array[0]);
length += RB_EVNT_HDR_SIZE;
length = ALIGN(length, RB_ARCH_ALIGNMENT);
/*
* In case the time delta is larger than the 27 bits for it
* in the header, we need to add a timestamp. If another
* event comes in when trying to discard this one to increase
* the length, then the timestamp will be added in the allocated
* space of this event. If length is bigger than the size needed
* for the TIME_EXTEND, then padding has to be used. The events
* length must be either RB_LEN_TIME_EXTEND, or greater than or equal
* to RB_LEN_TIME_EXTEND + 8, as 8 is the minimum size for padding.
* As length is a multiple of 4, we only need to worry if it
* is 12 (RB_LEN_TIME_EXTEND + 4).
*/
if (length == RB_LEN_TIME_EXTEND + RB_ALIGNMENT)
length += RB_ALIGNMENT;
return length;
}
#ifndef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
static inline bool sched_clock_stable(void)
{
return true;
}
#endif
static inline int
rb_try_to_discard(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
unsigned long new_index, old_index;
struct buffer_page *bpage;
unsigned long index;
unsigned long addr;
new_index = rb_event_index(event);
old_index = new_index + rb_event_ts_length(event);
addr = (unsigned long)event;
addr &= PAGE_MASK;
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
bpage = READ_ONCE(cpu_buffer->tail_page);
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
if (bpage->page == (void *)addr && rb_page_write(bpage) == old_index) {
unsigned long write_mask =
local_read(&bpage->write) & ~RB_WRITE_MASK;
unsigned long event_length = rb_event_length(event);
/*
* This is on the tail page. It is possible that
* a write could come in and move the tail page
* and write to the next page. That is fine
* because we just shorten what is on this page.
*/
old_index += write_mask;
new_index += write_mask;
index = local_cmpxchg(&bpage->write, old_index, new_index);
if (index == old_index) {
/* update counters */
local_sub(event_length, &cpu_buffer->entries_bytes);
return 1;
}
}
/* could not discard */
return 0;
}
static void rb_start_commit(struct ring_buffer_per_cpu *cpu_buffer)
{
local_inc(&cpu_buffer->committing);
local_inc(&cpu_buffer->commits);
}
static void
rb_set_commit_to_write(struct ring_buffer_per_cpu *cpu_buffer)
{
unsigned long max_count;
/*
* We only race with interrupts and NMIs on this CPU.
* If we own the commit event, then we can commit
* all others that interrupted us, since the interruptions
* are in stack format (they finish before they come
* back to us). This allows us to do a simple loop to
* assign the commit to the tail.
*/
again:
max_count = cpu_buffer->nr_pages * 100;
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
while (cpu_buffer->commit_page != READ_ONCE(cpu_buffer->tail_page)) {
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
if (RB_WARN_ON(cpu_buffer, !(--max_count)))
return;
if (RB_WARN_ON(cpu_buffer,
rb_is_reader_page(cpu_buffer->tail_page)))
return;
local_set(&cpu_buffer->commit_page->page->commit,
rb_page_write(cpu_buffer->commit_page));
rb_inc_page(cpu_buffer, &cpu_buffer->commit_page);
ring-buffer: Remove redundant update of page timestamp The first commit of a buffer page updates the timestamp of that page. No need to have the update to the next page add the timestamp too. It will only be replaced by the first commit on that page anyway. Only update to a page if it contains an event. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 23:15:19 +03:00
/* Only update the write stamp if the page has an event */
if (rb_page_write(cpu_buffer->commit_page))
cpu_buffer->write_stamp =
cpu_buffer->commit_page->page->time_stamp;
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
/* add barrier to keep gcc from optimizing too much */
barrier();
}
while (rb_commit_index(cpu_buffer) !=
rb_page_write(cpu_buffer->commit_page)) {
local_set(&cpu_buffer->commit_page->page->commit,
rb_page_write(cpu_buffer->commit_page));
RB_WARN_ON(cpu_buffer,
local_read(&cpu_buffer->commit_page->page->commit) &
~RB_WRITE_MASK);
barrier();
}
/* again, keep gcc from optimizing */
barrier();
/*
* If an interrupt came in just after the first while loop
* and pushed the tail page forward, we will be left with
* a dangling commit that will never go forward.
*/
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
if (unlikely(cpu_buffer->commit_page != READ_ONCE(cpu_buffer->tail_page)))
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
goto again;
}
static inline void rb_end_commit(struct ring_buffer_per_cpu *cpu_buffer)
{
unsigned long commits;
if (RB_WARN_ON(cpu_buffer,
!local_read(&cpu_buffer->committing)))
return;
again:
commits = local_read(&cpu_buffer->commits);
/* synchronize with interrupts */
barrier();
if (local_read(&cpu_buffer->committing) == 1)
rb_set_commit_to_write(cpu_buffer);
local_dec(&cpu_buffer->committing);
/* synchronize with interrupts */
barrier();
/*
* Need to account for interrupts coming in between the
* updating of the commit page and the clearing of the
* committing counter.
*/
if (unlikely(local_read(&cpu_buffer->commits) != commits) &&
!local_read(&cpu_buffer->committing)) {
local_inc(&cpu_buffer->committing);
goto again;
}
}
static inline void rb_event_discard(struct ring_buffer_event *event)
{
if (event->type_len == RINGBUF_TYPE_TIME_EXTEND)
event = skip_time_extend(event);
/* array[0] holds the actual length for the discarded event */
event->array[0] = rb_event_data_length(event) - RB_EVNT_HDR_SIZE;
event->type_len = RINGBUF_TYPE_PADDING;
/* time delta must be non zero */
if (!event->time_delta)
event->time_delta = 1;
}
ring-buffer: rb_event_is_commit() can return boolean Make rb_event_is_commit() return bool to improve readability due to this particular function only using either one or zero as its return value. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-7-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:34 +03:00
static inline bool
ring-buffer: Reorganize function locations Functions in ring-buffer.c have gotten interleaved between different use cases. Move the functions around to get like functions closer together. This may or may not help gcc keep cache locality, but it makes it a little easier to work with the code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 19:12:27 +03:00
rb_event_is_commit(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
unsigned long addr = (unsigned long)event;
unsigned long index;
index = rb_event_index(event);
addr &= PAGE_MASK;
return cpu_buffer->commit_page->page == (void *)addr &&
rb_commit_index(cpu_buffer) == index;
}
static void
rb_update_write_stamp(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
u64 delta;
/*
* The event first in the commit queue updates the
* time stamp.
*/
if (rb_event_is_commit(cpu_buffer, event)) {
/*
* A commit event that is first on a page
* updates the write timestamp with the page stamp
*/
if (!rb_event_index(event))
cpu_buffer->write_stamp =
cpu_buffer->commit_page->page->time_stamp;
else if (event->type_len == RINGBUF_TYPE_TIME_EXTEND) {
delta = event->array[0];
delta <<= TS_SHIFT;
delta += event->time_delta;
cpu_buffer->write_stamp += delta;
} else
cpu_buffer->write_stamp += event->time_delta;
}
}
static void rb_commit(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
local_inc(&cpu_buffer->entries);
rb_update_write_stamp(cpu_buffer, event);
rb_end_commit(cpu_buffer);
}
static __always_inline void
rb_wakeups(struct ring_buffer *buffer, struct ring_buffer_per_cpu *cpu_buffer)
{
bool pagebusy;
if (buffer->irq_work.waiters_pending) {
buffer->irq_work.waiters_pending = false;
/* irq_work_queue() supplies it's own memory barriers */
irq_work_queue(&buffer->irq_work.work);
}
if (cpu_buffer->irq_work.waiters_pending) {
cpu_buffer->irq_work.waiters_pending = false;
/* irq_work_queue() supplies it's own memory barriers */
irq_work_queue(&cpu_buffer->irq_work.work);
}
pagebusy = cpu_buffer->reader_page == cpu_buffer->commit_page;
if (!pagebusy && cpu_buffer->irq_work.full_waiters_pending) {
cpu_buffer->irq_work.wakeup_full = true;
cpu_buffer->irq_work.full_waiters_pending = false;
/* irq_work_queue() supplies it's own memory barriers */
irq_work_queue(&cpu_buffer->irq_work.work);
}
}
/*
* The lock and unlock are done within a preempt disable section.
* The current_context per_cpu variable can only be modified
* by the current task between lock and unlock. But it can
* be modified more than once via an interrupt. To pass this
* information from the lock to the unlock without having to
* access the 'in_interrupt()' functions again (which do show
* a bit of overhead in something as critical as function tracing,
* we use a bitmask trick.
*
* bit 0 = NMI context
* bit 1 = IRQ context
* bit 2 = SoftIRQ context
* bit 3 = normal context.
*
* This works because this is the order of contexts that can
* preempt other contexts. A SoftIRQ never preempts an IRQ
* context.
*
* When the context is determined, the corresponding bit is
* checked and set (if it was set, then a recursion of that context
* happened).
*
* On unlock, we need to clear this bit. To do so, just subtract
* 1 from the current_context and AND it to itself.
*
* (binary)
* 101 - 1 = 100
* 101 & 100 = 100 (clearing bit zero)
*
* 1010 - 1 = 1001
* 1010 & 1001 = 1000 (clearing bit 1)
*
* The least significant bit can be cleared this way, and it
* just so happens that it is the same bit corresponding to
* the current context.
*/
static __always_inline int
trace_recursive_lock(struct ring_buffer_per_cpu *cpu_buffer)
{
unsigned int val = cpu_buffer->current_context;
int bit;
if (in_interrupt()) {
if (in_nmi())
bit = RB_CTX_NMI;
else if (in_irq())
bit = RB_CTX_IRQ;
else
bit = RB_CTX_SOFTIRQ;
} else
bit = RB_CTX_NORMAL;
if (unlikely(val & (1 << bit)))
return 1;
val |= (1 << bit);
cpu_buffer->current_context = val;
return 0;
}
static __always_inline void
trace_recursive_unlock(struct ring_buffer_per_cpu *cpu_buffer)
{
cpu_buffer->current_context &= cpu_buffer->current_context - 1;
}
/**
* ring_buffer_unlock_commit - commit a reserved
* @buffer: The buffer to commit to
* @event: The event pointer to commit.
*
* This commits the data to the ring buffer, and releases any locks held.
*
* Must be paired with ring_buffer_lock_reserve.
*/
int ring_buffer_unlock_commit(struct ring_buffer *buffer,
struct ring_buffer_event *event)
{
struct ring_buffer_per_cpu *cpu_buffer;
int cpu = raw_smp_processor_id();
cpu_buffer = buffer->buffers[cpu];
rb_commit(cpu_buffer, event);
rb_wakeups(buffer, cpu_buffer);
trace_recursive_unlock(cpu_buffer);
preempt_enable_notrace();
return 0;
}
EXPORT_SYMBOL_GPL(ring_buffer_unlock_commit);
static noinline void
rb_handle_timestamp(struct ring_buffer_per_cpu *cpu_buffer,
struct rb_event_info *info)
{
WARN_ONCE(info->delta > (1ULL << 59),
KERN_WARNING "Delta way too big! %llu ts=%llu write stamp = %llu\n%s",
(unsigned long long)info->delta,
(unsigned long long)info->ts,
(unsigned long long)cpu_buffer->write_stamp,
sched_clock_stable() ? "" :
"If you just came from a suspend/resume,\n"
"please switch to the trace global clock:\n"
" echo global > /sys/kernel/debug/tracing/trace_clock\n");
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
info->add_timestamp = 1;
ring-buffer: Move the adding of the extended timestamp out of line Requiring a extended time stamp is an uncommon occurrence, and it is best to do it out of line when needed. Add a noinline function that handles the extended timestamp and have it called with an unlikely to completely move it out of the fast path. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:36:45 +03:00
}
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
static struct ring_buffer_event *
__rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
struct rb_event_info *info)
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
{
struct ring_buffer_event *event;
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
struct buffer_page *tail_page;
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
unsigned long tail, write;
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
/*
* If the time delta since the last event is too big to
* hold in the time field of the event, then we append a
* TIME EXTEND event ahead of the data event.
*/
if (unlikely(info->add_timestamp))
info->length += RB_LEN_TIME_EXTEND;
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
ring-buffer: Use READ_ONCE() for most tail_page access As cpu_buffer->tail_page may be modified by interrupts at almost any time, the flow of logic is very important. Do not let gcc get smart with re-reading cpu_buffer->tail_page by adding READ_ONCE() around most of its accesses. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-17 22:03:11 +03:00
/* Don't let the compiler play games with cpu_buffer->tail_page */
tail_page = info->tail_page = READ_ONCE(cpu_buffer->tail_page);
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
write = local_add_return(info->length, &tail_page->write);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/* set write to only the index of the write */
write &= RB_WRITE_MASK;
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
tail = write - info->length;
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
/*
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
* If this is the first commit on the page, then it has the same
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
* timestamp as the page itself.
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
*/
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
if (!tail)
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
info->delta = 0;
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
/* See if we shot pass the end of this buffer page */
if (unlikely(write > BUF_PAGE_SIZE))
return rb_move_tail(cpu_buffer, tail, info);
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
/* We reserved something on the buffer */
event = __rb_page_index(tail_page, tail);
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
kmemcheck_annotate_bitfield(event, bitfield);
rb_update_event(cpu_buffer, event, info);
local_inc(&tail_page->entries);
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
/*
* If this is the first commit on the page, then update
* its timestamp.
*/
if (!tail)
tail_page->page->time_stamp = info->ts;
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
/* account for these added bytes */
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
local_add(info->length, &cpu_buffer->entries_bytes);
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
ring-buffer: make moving the tail page a separate function Ingo Molnar thought the code would be cleaner if we used a function call instead of a goto for moving the tail page. After implementing this, it seems that gcc still inlines the result and the output is pretty much the same. Since this is considered a cleaner approach, might as well implement it. [ Impact: code clean up ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 23:30:07 +04:00
return event;
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
static struct ring_buffer_event *
ring-buffer: check for swapped buffers in start of committing Because the irqsoff tracer can swap an internal CPU buffer, it is possible that a swap happens between the start of the write and before the committing bit is set (the committing bit will disable swapping). This patch adds a check for this and will fail the write if it detects it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:11:34 +04:00
rb_reserve_next_event(struct ring_buffer *buffer,
struct ring_buffer_per_cpu *cpu_buffer,
ring-buffer: remove type parameter from rb_reserve_next_event The rb_reserve_next_event is only called for the data type (type = 0). There is no reason to pass in the type to the function. Before: text data bss dec hex filename 16554 24 12 16590 40ce kernel/trace/ring_buffer.o After: text data bss dec hex filename 16538 24 12 16574 40be kernel/trace/ring_buffer.o [ Impact: cleaner, smaller and slightly more efficient code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 22:08:09 +04:00
unsigned long length)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_event *event;
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
struct rb_event_info info;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
int nr_loops = 0;
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
u64 diff;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
rb_start_commit(cpu_buffer);
ring-buffer: only enable ring_buffer_swap_cpu when needed Since the ability to swap the cpu buffers adds a small overhead to the recording of a trace, we only want to add it when needed. Only the irqsoff and preemptoff tracers use this feature, and both are not recommended for production kernels. This patch disables its use when neither irqsoff nor preemptoff is configured. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:24:40 +04:00
#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
ring-buffer: check for swapped buffers in start of committing Because the irqsoff tracer can swap an internal CPU buffer, it is possible that a swap happens between the start of the write and before the committing bit is set (the committing bit will disable swapping). This patch adds a check for this and will fail the write if it detects it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:11:34 +04:00
/*
* Due to the ability to swap a cpu buffer from a buffer
* it is possible it was swapped before we committed.
* (committing stops a swap). We check for it here and
* if it happened, we have to fail the write.
*/
barrier();
if (unlikely(ACCESS_ONCE(cpu_buffer->buffer) != buffer)) {
local_dec(&cpu_buffer->committing);
local_dec(&cpu_buffer->commits);
return NULL;
}
ring-buffer: only enable ring_buffer_swap_cpu when needed Since the ability to swap the cpu buffers adds a small overhead to the recording of a trace, we only want to add it when needed. Only the irqsoff and preemptoff tracers use this feature, and both are not recommended for production kernels. This patch disables its use when neither irqsoff nor preemptoff is configured. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:24:40 +04:00
#endif
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
info.length = rb_calculate_event_length(length);
ring-buffer: Get timestamp after event is allocated Move the capturing of the timestamp to after an event is allocated. If the event is not a commit (where it is an event that preempted another event), then no timestamp is needed, because the delta of nested events is always zero. If the event starts on a new page, no delta needs to be calculated as the full timestamp will be added to the page header, and the event will have a delta of zero. Now if the event requires a time extend (the delta does not fit in the 27 bit delta slot in the header), then the event is discarded, the length is extended to hold the TIME_EXTEND event that allows for a 59 bit delta, and the commit is tried again. If the event can't be discarded (another event came in after it), then the TIME_EXTEND is added directly to the allocated event and the rest of the event is given padding. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 16:40:18 +03:00
again:
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
info.add_timestamp = 0;
info.delta = 0;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
/*
* We allow for interrupts to reenter here and do a trace.
* If one does, it will cause this original code to loop
* back here. Even with heavy interrupts happening, this
* should only happen a few times in a row. If this happens
* 1000 times in a row, there must be either an interrupt
* storm or we have something buggy.
* Bail!
*/
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000))
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
goto out_fail;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated" The commit a4543a2fa9ef31 "ring-buffer: Get timestamp after event is allocated" is needed for some future work. But after adding it, there is a race somewhere that causes the saved timestamp to have a slight shift, and get ahead of the actual timestamp and make it look like time goes backwards. I'm still looking into why this happens, but in the mean time, this is holding up other work to get in. I'm reverting the change for now (which makes the problem go away), and will add it back after I know what is wrong and fix it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-03 15:57:12 +03:00
info.ts = rb_time_stamp(cpu_buffer->buffer);
diff = info.ts - cpu_buffer->write_stamp;
/* make sure this diff is calculated here */
barrier();
/* Did the write stamp get updated already? */
if (likely(info.ts >= cpu_buffer->write_stamp)) {
info.delta = diff;
if (unlikely(test_time_stamp(info.delta)))
rb_handle_timestamp(cpu_buffer, &info);
}
ring-buffer: Add event descriptor to simplify passing data Add rb_event_info descriptor to pass event info to functions a bit easier than using a bunch of parameters. This will also allow for changing the code around a bit to find better fast paths. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-29 00:13:14 +03:00
event = __rb_reserve_next(cpu_buffer, &info);
ring-buffer: Put back the length if crossed page with add_timestamp Commit fcc742eaad7c "ring-buffer: Add event descriptor to simplify passing data" added a descriptor that holds various data instead of passing around several variables through parameters. The problem was that one of the parameters was modified in a function and the code was designed not to have an effect on that modified parameter. Now that the parameter is a descriptor and any modifications to it are non-volatile, the size of the data could be unnecessarily expanded. Remove the extra space added if a timestamp was added and the event went across the page. Cc: stable@vger.kernel.org # 4.3+ Fixes: fcc742eaad7c "ring-buffer: Add event descriptor to simplify passing data" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-24 01:35:24 +03:00
if (unlikely(PTR_ERR(event) == -EAGAIN)) {
if (info.add_timestamp)
info.length -= RB_LEN_TIME_EXTEND;
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
goto again;
ring-buffer: Put back the length if crossed page with add_timestamp Commit fcc742eaad7c "ring-buffer: Add event descriptor to simplify passing data" added a descriptor that holds various data instead of passing around several variables through parameters. The problem was that one of the parameters was modified in a function and the code was designed not to have an effect on that modified parameter. Now that the parameter is a descriptor and any modifications to it are non-volatile, the size of the data could be unnecessarily expanded. Remove the extra space added if a timestamp was added and the event went across the page. Cc: stable@vger.kernel.org # 4.3+ Fixes: fcc742eaad7c "ring-buffer: Add event descriptor to simplify passing data" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-24 01:35:24 +03:00
}
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
if (!event)
goto out_fail;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return event;
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
out_fail:
rb_end_commit(cpu_buffer);
return NULL;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
/**
* ring_buffer_lock_reserve - reserve a part of the buffer
* @buffer: the ring buffer to reserve from
* @length: the length of the data to reserve (excluding event header)
*
* Returns a reseverd event on the ring buffer to copy directly to.
* The user of this interface will need to get the body to write into
* and can use the ring_buffer_event_data() interface.
*
* The length is the length of the data needed, not the event length
* which also includes the event header.
*
* Must be paired with ring_buffer_unlock_commit, unless NULL is returned.
* If NULL is returned, then nothing has been allocated or locked.
*/
struct ring_buffer_event *
ring_buffer: remove unused flags parameter Impact: API change, cleanup >From ring_buffer_{lock_reserve,unlock_commit}. $ codiff /tmp/vmlinux.before /tmp/vmlinux.after linux-2.6-tip/kernel/trace/trace.c: trace_vprintk | -14 trace_graph_return | -14 trace_graph_entry | -10 trace_function | -8 __ftrace_trace_stack | -8 ftrace_trace_userstack | -8 tracing_sched_switch_trace | -8 ftrace_trace_special | -12 tracing_sched_wakeup_trace | -8 9 functions changed, 90 bytes removed, diff: -90 linux-2.6-tip/block/blktrace.c: __blk_add_trace | -1 1 function changed, 1 bytes removed, diff: -1 /tmp/vmlinux.after: 10 functions changed, 91 bytes removed, diff: -91 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Frédéric Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 21:12:56 +03:00
ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event;
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
int cpu;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
/* If we are tracing schedule, we don't want to recurse */
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
preempt_disable_notrace();
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
ring-buffer: Add unlikelys to make fast path the default I was running the trace_event benchmark and noticed that the times to record a trace_event was all over the place. I looked at the assembly of the ring_buffer_lock_reserver() and saw this: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 1d jne ffffffff8113c60d <ring_buffer_lock_reserve+0x2d> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax +---- 74 12 je ffffffff8113c610 <ring_buffer_lock_reserve+0x30> | 65 ff 0d 5b e3 ec 7e decl %gs:0x7eece35b(%rip) # a960 <__preempt_count> | 0f 84 85 00 00 00 je ffffffff8113c690 <ring_buffer_lock_reserve+0xb0> | 31 c0 xor %eax,%eax | 5d pop %rbp | c3 retq | 90 nop +---> 65 44 8b 05 48 e3 ec mov %gs:0x7eece348(%rip),%r8d # a960 <__preempt_count> 7e 41 81 e0 ff ff ff 7f and $0x7fffffff,%r8d b0 08 mov $0x8,%al 65 8b 0d 58 36 ed 7e mov %gs:0x7eed3658(%rip),%ecx # fc80 <current_context> 41 f7 c0 00 ff 1f 00 test $0x1fff00,%r8d 74 1e je ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 f7 c0 00 00 10 00 test $0x100000,%r8d b0 01 mov $0x1,%al 75 13 jne ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 81 e0 00 00 0f 00 and $0xf0000,%r8d 49 83 f8 01 cmp $0x1,%r8 19 c0 sbb %eax,%eax 83 e0 02 and $0x2,%eax 83 c0 02 add $0x2,%eax 85 c8 test %ecx,%eax 75 ab jne ffffffff8113c5fe <ring_buffer_lock_reserve+0x1e> 09 c8 or %ecx,%eax 65 89 05 24 36 ed 7e mov %eax,%gs:0x7eed3624(%rip) # fc80 <current_context> The arrow is the fast path. After adding the unlikely's, the fast path looks a bit better: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 7b jne ffffffff8113c66b <ring_buffer_lock_reserve+0x8b> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax 0f 85 9f 00 00 00 jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 65 8b 0d 57 e3 ec 7e mov %gs:0x7eece357(%rip),%ecx # a960 <__preempt_count> 81 e1 ff ff ff 7f and $0x7fffffff,%ecx b0 08 mov $0x8,%al 65 8b 15 68 36 ed 7e mov %gs:0x7eed3668(%rip),%edx # fc80 <current_context> f7 c1 00 ff 1f 00 test $0x1fff00,%ecx 75 50 jne ffffffff8113c670 <ring_buffer_lock_reserve+0x90> 85 d0 test %edx,%eax 75 7d jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 09 d0 or %edx,%eax 65 89 05 53 36 ed 7e mov %eax,%gs:0x7eed3653(%rip) # fc80 <current_context> 65 8b 05 fc da ec 7e mov %gs:0x7eecdafc(%rip),%eax # a130 <cpu_number> 89 c2 mov %eax,%edx Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-22 00:39:29 +03:00
if (unlikely(atomic_read(&buffer->record_disabled)))
ring-buffer: Move recursive check to per_cpu descriptor Instead of using a global per_cpu variable to perform the recursive checks into the ring buffer, use the already existing per_cpu descriptor that is part of the ring buffer itself. Not only does this simplify the code, it also allows for one ring buffer to be used within the guts of the use of another ring buffer. For example trace_printk() can now be used within the ring buffer to record changes done by an instance into the main ring buffer. The recursion checks will prevent the trace_printk() itself from causing recursive issues with the main ring buffer (it is just ignored), but the recursive checks wont prevent the trace_printk() from recording other ring buffers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:27:47 +03:00
goto out;
tracing: add same level recursion detection The tracing infrastructure allows for recursion. That is, an interrupt may interrupt the act of tracing an event, and that interrupt may very well perform its own trace. This is a recursive trace, and is fine to do. The problem arises when there is a bug, and the utility doing the trace calls something that recurses back into the tracer. This recursion is not caused by an external event like an interrupt, but by code that is not expected to recurse. The result could be a lockup. This patch adds a bitmask to the task structure that keeps track of the trace recursion. To find the interrupt depth, the following algorithm is used: level = hardirq_count() + softirq_count() + in_nmi; Here, level will be the depth of interrutps and softirqs, and even handles the nmi. Then the corresponding bit is set in the recursion bitmask. If the bit was already set, we know we had a recursion at the same level and we warn about it and fail the writing to the buffer. After the data has been committed to the buffer, we clear the bit. No atomics are needed. The only races are with interrupts and they reset the bitmask before returning anywy. [ Impact: detect same irq level trace recursion ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-17 05:41:52 +04:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu = raw_smp_processor_id();
ring-buffer: Add unlikelys to make fast path the default I was running the trace_event benchmark and noticed that the times to record a trace_event was all over the place. I looked at the assembly of the ring_buffer_lock_reserver() and saw this: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 1d jne ffffffff8113c60d <ring_buffer_lock_reserve+0x2d> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax +---- 74 12 je ffffffff8113c610 <ring_buffer_lock_reserve+0x30> | 65 ff 0d 5b e3 ec 7e decl %gs:0x7eece35b(%rip) # a960 <__preempt_count> | 0f 84 85 00 00 00 je ffffffff8113c690 <ring_buffer_lock_reserve+0xb0> | 31 c0 xor %eax,%eax | 5d pop %rbp | c3 retq | 90 nop +---> 65 44 8b 05 48 e3 ec mov %gs:0x7eece348(%rip),%r8d # a960 <__preempt_count> 7e 41 81 e0 ff ff ff 7f and $0x7fffffff,%r8d b0 08 mov $0x8,%al 65 8b 0d 58 36 ed 7e mov %gs:0x7eed3658(%rip),%ecx # fc80 <current_context> 41 f7 c0 00 ff 1f 00 test $0x1fff00,%r8d 74 1e je ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 f7 c0 00 00 10 00 test $0x100000,%r8d b0 01 mov $0x1,%al 75 13 jne ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 81 e0 00 00 0f 00 and $0xf0000,%r8d 49 83 f8 01 cmp $0x1,%r8 19 c0 sbb %eax,%eax 83 e0 02 and $0x2,%eax 83 c0 02 add $0x2,%eax 85 c8 test %ecx,%eax 75 ab jne ffffffff8113c5fe <ring_buffer_lock_reserve+0x1e> 09 c8 or %ecx,%eax 65 89 05 24 36 ed 7e mov %eax,%gs:0x7eed3624(%rip) # fc80 <current_context> The arrow is the fast path. After adding the unlikely's, the fast path looks a bit better: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 7b jne ffffffff8113c66b <ring_buffer_lock_reserve+0x8b> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax 0f 85 9f 00 00 00 jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 65 8b 0d 57 e3 ec 7e mov %gs:0x7eece357(%rip),%ecx # a960 <__preempt_count> 81 e1 ff ff ff 7f and $0x7fffffff,%ecx b0 08 mov $0x8,%al 65 8b 15 68 36 ed 7e mov %gs:0x7eed3668(%rip),%edx # fc80 <current_context> f7 c1 00 ff 1f 00 test $0x1fff00,%ecx 75 50 jne ffffffff8113c670 <ring_buffer_lock_reserve+0x90> 85 d0 test %edx,%eax 75 7d jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 09 d0 or %edx,%eax 65 89 05 53 36 ed 7e mov %eax,%gs:0x7eed3653(%rip) # fc80 <current_context> 65 8b 05 fc da ec 7e mov %gs:0x7eecdafc(%rip),%eax # a130 <cpu_number> 89 c2 mov %eax,%edx Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-22 00:39:29 +03:00
if (unlikely(!cpumask_test_cpu(cpu, buffer->cpumask)))
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
ring-buffer: Add unlikelys to make fast path the default I was running the trace_event benchmark and noticed that the times to record a trace_event was all over the place. I looked at the assembly of the ring_buffer_lock_reserver() and saw this: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 1d jne ffffffff8113c60d <ring_buffer_lock_reserve+0x2d> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax +---- 74 12 je ffffffff8113c610 <ring_buffer_lock_reserve+0x30> | 65 ff 0d 5b e3 ec 7e decl %gs:0x7eece35b(%rip) # a960 <__preempt_count> | 0f 84 85 00 00 00 je ffffffff8113c690 <ring_buffer_lock_reserve+0xb0> | 31 c0 xor %eax,%eax | 5d pop %rbp | c3 retq | 90 nop +---> 65 44 8b 05 48 e3 ec mov %gs:0x7eece348(%rip),%r8d # a960 <__preempt_count> 7e 41 81 e0 ff ff ff 7f and $0x7fffffff,%r8d b0 08 mov $0x8,%al 65 8b 0d 58 36 ed 7e mov %gs:0x7eed3658(%rip),%ecx # fc80 <current_context> 41 f7 c0 00 ff 1f 00 test $0x1fff00,%r8d 74 1e je ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 f7 c0 00 00 10 00 test $0x100000,%r8d b0 01 mov $0x1,%al 75 13 jne ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 81 e0 00 00 0f 00 and $0xf0000,%r8d 49 83 f8 01 cmp $0x1,%r8 19 c0 sbb %eax,%eax 83 e0 02 and $0x2,%eax 83 c0 02 add $0x2,%eax 85 c8 test %ecx,%eax 75 ab jne ffffffff8113c5fe <ring_buffer_lock_reserve+0x1e> 09 c8 or %ecx,%eax 65 89 05 24 36 ed 7e mov %eax,%gs:0x7eed3624(%rip) # fc80 <current_context> The arrow is the fast path. After adding the unlikely's, the fast path looks a bit better: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 7b jne ffffffff8113c66b <ring_buffer_lock_reserve+0x8b> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax 0f 85 9f 00 00 00 jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 65 8b 0d 57 e3 ec 7e mov %gs:0x7eece357(%rip),%ecx # a960 <__preempt_count> 81 e1 ff ff ff 7f and $0x7fffffff,%ecx b0 08 mov $0x8,%al 65 8b 15 68 36 ed 7e mov %gs:0x7eed3668(%rip),%edx # fc80 <current_context> f7 c1 00 ff 1f 00 test $0x1fff00,%ecx 75 50 jne ffffffff8113c670 <ring_buffer_lock_reserve+0x90> 85 d0 test %edx,%eax 75 7d jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 09 d0 or %edx,%eax 65 89 05 53 36 ed 7e mov %eax,%gs:0x7eed3653(%rip) # fc80 <current_context> 65 8b 05 fc da ec 7e mov %gs:0x7eecdafc(%rip),%eax # a130 <cpu_number> 89 c2 mov %eax,%edx Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-22 00:39:29 +03:00
if (unlikely(atomic_read(&cpu_buffer->record_disabled)))
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Add unlikelys to make fast path the default I was running the trace_event benchmark and noticed that the times to record a trace_event was all over the place. I looked at the assembly of the ring_buffer_lock_reserver() and saw this: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 1d jne ffffffff8113c60d <ring_buffer_lock_reserve+0x2d> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax +---- 74 12 je ffffffff8113c610 <ring_buffer_lock_reserve+0x30> | 65 ff 0d 5b e3 ec 7e decl %gs:0x7eece35b(%rip) # a960 <__preempt_count> | 0f 84 85 00 00 00 je ffffffff8113c690 <ring_buffer_lock_reserve+0xb0> | 31 c0 xor %eax,%eax | 5d pop %rbp | c3 retq | 90 nop +---> 65 44 8b 05 48 e3 ec mov %gs:0x7eece348(%rip),%r8d # a960 <__preempt_count> 7e 41 81 e0 ff ff ff 7f and $0x7fffffff,%r8d b0 08 mov $0x8,%al 65 8b 0d 58 36 ed 7e mov %gs:0x7eed3658(%rip),%ecx # fc80 <current_context> 41 f7 c0 00 ff 1f 00 test $0x1fff00,%r8d 74 1e je ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 f7 c0 00 00 10 00 test $0x100000,%r8d b0 01 mov $0x1,%al 75 13 jne ffffffff8113c64f <ring_buffer_lock_reserve+0x6f> 41 81 e0 00 00 0f 00 and $0xf0000,%r8d 49 83 f8 01 cmp $0x1,%r8 19 c0 sbb %eax,%eax 83 e0 02 and $0x2,%eax 83 c0 02 add $0x2,%eax 85 c8 test %ecx,%eax 75 ab jne ffffffff8113c5fe <ring_buffer_lock_reserve+0x1e> 09 c8 or %ecx,%eax 65 89 05 24 36 ed 7e mov %eax,%gs:0x7eed3624(%rip) # fc80 <current_context> The arrow is the fast path. After adding the unlikely's, the fast path looks a bit better: <ring_buffer_lock_reserve>: 31 c0 xor %eax,%eax 48 83 3d 76 47 bd 00 cmpq $0x1,0xbd4776(%rip) # ffffffff81d10d60 <ring_buffer_flags> 01 55 push %rbp 48 89 e5 mov %rsp,%rbp 75 7b jne ffffffff8113c66b <ring_buffer_lock_reserve+0x8b> 65 ff 05 69 e3 ec 7e incl %gs:0x7eece369(%rip) # a960 <__preempt_count> 8b 47 08 mov 0x8(%rdi),%eax 85 c0 test %eax,%eax 0f 85 9f 00 00 00 jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 65 8b 0d 57 e3 ec 7e mov %gs:0x7eece357(%rip),%ecx # a960 <__preempt_count> 81 e1 ff ff ff 7f and $0x7fffffff,%ecx b0 08 mov $0x8,%al 65 8b 15 68 36 ed 7e mov %gs:0x7eed3668(%rip),%edx # fc80 <current_context> f7 c1 00 ff 1f 00 test $0x1fff00,%ecx 75 50 jne ffffffff8113c670 <ring_buffer_lock_reserve+0x90> 85 d0 test %edx,%eax 75 7d jne ffffffff8113c6a1 <ring_buffer_lock_reserve+0xc1> 09 d0 or %edx,%eax 65 89 05 53 36 ed 7e mov %eax,%gs:0x7eed3653(%rip) # fc80 <current_context> 65 8b 05 fc da ec 7e mov %gs:0x7eecdafc(%rip),%eax # a130 <cpu_number> 89 c2 mov %eax,%edx Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-22 00:39:29 +03:00
if (unlikely(length > BUF_MAX_DATA_SIZE))
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Move recursive check to per_cpu descriptor Instead of using a global per_cpu variable to perform the recursive checks into the ring buffer, use the already existing per_cpu descriptor that is part of the ring buffer itself. Not only does this simplify the code, it also allows for one ring buffer to be used within the guts of the use of another ring buffer. For example trace_printk() can now be used within the ring buffer to record changes done by an instance into the main ring buffer. The recursion checks will prevent the trace_printk() itself from causing recursive issues with the main ring buffer (it is just ignored), but the recursive checks wont prevent the trace_printk() from recording other ring buffers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:27:47 +03:00
if (unlikely(trace_recursive_lock(cpu_buffer)))
goto out;
ring-buffer: check for swapped buffers in start of committing Because the irqsoff tracer can swap an internal CPU buffer, it is possible that a swap happens between the start of the write and before the committing bit is set (the committing bit will disable swapping). This patch adds a check for this and will fail the write if it detects it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:11:34 +04:00
event = rb_reserve_next_event(buffer, cpu_buffer, length);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
if (!event)
ring-buffer: Move recursive check to per_cpu descriptor Instead of using a global per_cpu variable to perform the recursive checks into the ring buffer, use the already existing per_cpu descriptor that is part of the ring buffer itself. Not only does this simplify the code, it also allows for one ring buffer to be used within the guts of the use of another ring buffer. For example trace_printk() can now be used within the ring buffer to record changes done by an instance into the main ring buffer. The recursion checks will prevent the trace_printk() itself from causing recursive issues with the main ring buffer (it is just ignored), but the recursive checks wont prevent the trace_printk() from recording other ring buffers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:27:47 +03:00
goto out_unlock;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return event;
ring-buffer: Move recursive check to per_cpu descriptor Instead of using a global per_cpu variable to perform the recursive checks into the ring buffer, use the already existing per_cpu descriptor that is part of the ring buffer itself. Not only does this simplify the code, it also allows for one ring buffer to be used within the guts of the use of another ring buffer. For example trace_printk() can now be used within the ring buffer to record changes done by an instance into the main ring buffer. The recursion checks will prevent the trace_printk() itself from causing recursive issues with the main ring buffer (it is just ignored), but the recursive checks wont prevent the trace_printk() from recording other ring buffers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:27:47 +03:00
out_unlock:
trace_recursive_unlock(cpu_buffer);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
out:
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
preempt_enable_notrace();
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return NULL;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_lock_reserve);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
/*
* Decrement the entries to the page that an event is on.
* The event does not even need to exist, only the pointer
* to the page it is on. This may only be called before the commit
* takes place.
*/
static inline void
rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
unsigned long addr = (unsigned long)event;
struct buffer_page *bpage = cpu_buffer->commit_page;
struct buffer_page *start;
addr &= PAGE_MASK;
/* Do the likely case first */
if (likely(bpage->page == (void *)addr)) {
local_dec(&bpage->entries);
return;
}
/*
* Because the commit page may be on the reader page we
* start with the next page and check the end loop there.
*/
rb_inc_page(cpu_buffer, &bpage);
start = bpage;
do {
if (bpage->page == (void *)addr) {
local_dec(&bpage->entries);
return;
}
rb_inc_page(cpu_buffer, &bpage);
} while (bpage != start);
/* commit not part of this buffer?? */
RB_WARN_ON(cpu_buffer, 1);
}
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
/**
* ring_buffer_commit_discard - discard an event that has not been committed
* @buffer: the ring buffer
* @event: non committed event to discard
*
ring-buffer: remove ring_buffer_event_discard The function ring_buffer_event_discard can be used on any item in the ring buffer, even after the item was committed. This function provides no safety nets and is very race prone. An item may be safely removed from the ring buffer before it is committed with the ring_buffer_discard_commit. Since there are currently no users of this function, and because this function is racey and error prone, this patch removes it altogether. Note, removing this function also allows the counters to ignore all discarded events (patches will follow). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 23:33:41 +04:00
* Sometimes an event that is in the ring buffer needs to be ignored.
* This function lets the user discard an event in the ring buffer
* and then that event will not be read later.
*
* This function only works if it is called before the the item has been
* committed. It will try to free the event from the ring buffer
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
* if another event has not been added behind it.
*
* If another event has been added behind it, it will set the event
* up as discarded, and perform the commit.
*
* If this function is called, do not call ring_buffer_unlock_commit on
* the event.
*/
void ring_buffer_discard_commit(struct ring_buffer *buffer,
struct ring_buffer_event *event)
{
struct ring_buffer_per_cpu *cpu_buffer;
int cpu;
/* The event is discarded regardless */
tracing/ring-buffer: Add unlock recursion protection on discard The pair of helpers trace_recursive_lock() and trace_recursive_unlock() have been introduced recently to provide generic tracing recursion protection. They are used in a symetric way: - trace_recursive_lock() on buffer reserve - trace_recursive_unlock() on buffer commit However sometimes, we don't commit but discard on entry to the buffer, ie: in case of filter checking. Then we must also unlock the recursion protection on discard time, otherwise the tracing gets definitely deactivated and a warning is raised spuriously, such as: 111.119821] ------------[ cut here ]------------ [ 111.119829] WARNING: at kernel/trace/ring_buffer.c:1498 ring_buffer_lock_reserve+0x1b7/0x1d0() [ 111.119835] Hardware name: AMILO Li 2727 [ 111.119839] Modules linked in: [ 111.119846] Pid: 5731, comm: Xorg Tainted: G W 2.6.30-rc1 #69 [ 111.119851] Call Trace: [ 111.119863] [<ffffffff8025ce68>] warn_slowpath+0xd8/0x130 [ 111.119873] [<ffffffff8028a30f>] ? __lock_acquire+0x19f/0x1ae0 [ 111.119882] [<ffffffff8028a30f>] ? __lock_acquire+0x19f/0x1ae0 [ 111.119891] [<ffffffff802199b0>] ? native_sched_clock+0x20/0x70 [ 111.119899] [<ffffffff80286dee>] ? put_lock_stats+0xe/0x30 [ 111.119906] [<ffffffff80286eb8>] ? lock_release_holdtime+0xa8/0x150 [ 111.119913] [<ffffffff802c8ae7>] ring_buffer_lock_reserve+0x1b7/0x1d0 [ 111.119921] [<ffffffff802cd110>] trace_buffer_lock_reserve+0x30/0x70 [ 111.119930] [<ffffffff802ce000>] trace_current_buffer_lock_reserve+0x20/0x30 [ 111.119939] [<ffffffff802474e8>] ftrace_raw_event_sched_switch+0x58/0x100 [ 111.119948] [<ffffffff808103b7>] __schedule+0x3a7/0x4cd [ 111.119957] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.119964] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.119971] [<ffffffff80810c08>] schedule+0x18/0x40 [ 111.119977] [<ffffffff80810e09>] preempt_schedule+0x39/0x60 [ 111.119985] [<ffffffff80813bd3>] _read_unlock+0x53/0x60 [ 111.119993] [<ffffffff807259d2>] sock_def_readable+0x72/0x80 [ 111.120002] [<ffffffff807ad5ed>] unix_stream_sendmsg+0x24d/0x3d0 [ 111.120011] [<ffffffff807219a3>] sock_aio_write+0x143/0x160 [ 111.120019] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120026] [<ffffffff80721860>] ? sock_aio_write+0x0/0x160 [ 111.120033] [<ffffffff80721860>] ? sock_aio_write+0x0/0x160 [ 111.120042] [<ffffffff8031c283>] do_sync_readv_writev+0xf3/0x140 [ 111.120049] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120057] [<ffffffff80276ff0>] ? autoremove_wake_function+0x0/0x40 [ 111.120067] [<ffffffff8045d489>] ? cap_file_permission+0x9/0x10 [ 111.120074] [<ffffffff8045c1e6>] ? security_file_permission+0x16/0x20 [ 111.120082] [<ffffffff8031cab4>] do_readv_writev+0xd4/0x1f0 [ 111.120089] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120097] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120105] [<ffffffff8031cc18>] vfs_writev+0x48/0x70 [ 111.120111] [<ffffffff8031cd65>] sys_writev+0x55/0xc0 [ 111.120119] [<ffffffff80211e32>] system_call_fastpath+0x16/0x1b [ 111.120125] ---[ end trace 15605f4e98d5ccb5 ]--- [ Impact: fix spurious warning triggering tracing shutdown ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-04-20 01:39:33 +04:00
rb_event_discard(event);
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
cpu = smp_processor_id();
cpu_buffer = buffer->buffers[cpu];
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
/*
* This must only be called if the event has not been
* committed yet. Thus we can assume that preemption
* is still disabled.
*/
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
RB_WARN_ON(buffer, !local_read(&cpu_buffer->committing));
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
rb_decrement_entry(cpu_buffer, event);
ring-buffer: fix check of try_to_discard result The function ring_buffer_discard_commit inversed the code path of the result of try_to_discard. It should skip incrementing the entry counter if try_to_discard succeeded. But instead, it increments the entry conder if it succeeded to discard, and does not increment it if it fails. The result of this bug is that filtering will make the stat counters incorrect. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-05 20:02:48 +04:00
if (rb_try_to_discard(cpu_buffer, event))
ring-buffer: try to discard unneeded timestamps There are times that a race may happen that we add a timestamp in a nested write. This timestamp would just contain a zero delta and serves no purpose. Now that we have a way to discard events, this patch will try to discard the timestamp instead of just wasting the space in the ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 07:00:53 +04:00
goto out;
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
/*
* The commit is still visible by the reader, so we
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
* must still update the timestamp.
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
*/
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
rb_update_write_stamp(cpu_buffer, event);
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
out:
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
rb_end_commit(cpu_buffer);
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
ring-buffer: Move recursive check to per_cpu descriptor Instead of using a global per_cpu variable to perform the recursive checks into the ring buffer, use the already existing per_cpu descriptor that is part of the ring buffer itself. Not only does this simplify the code, it also allows for one ring buffer to be used within the guts of the use of another ring buffer. For example trace_printk() can now be used within the ring buffer to record changes done by an instance into the main ring buffer. The recursion checks will prevent the trace_printk() itself from causing recursive issues with the main ring buffer (it is just ignored), but the recursive checks wont prevent the trace_printk() from recording other ring buffers. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:27:47 +03:00
trace_recursive_unlock(cpu_buffer);
tracing/ring-buffer: Add unlock recursion protection on discard The pair of helpers trace_recursive_lock() and trace_recursive_unlock() have been introduced recently to provide generic tracing recursion protection. They are used in a symetric way: - trace_recursive_lock() on buffer reserve - trace_recursive_unlock() on buffer commit However sometimes, we don't commit but discard on entry to the buffer, ie: in case of filter checking. Then we must also unlock the recursion protection on discard time, otherwise the tracing gets definitely deactivated and a warning is raised spuriously, such as: 111.119821] ------------[ cut here ]------------ [ 111.119829] WARNING: at kernel/trace/ring_buffer.c:1498 ring_buffer_lock_reserve+0x1b7/0x1d0() [ 111.119835] Hardware name: AMILO Li 2727 [ 111.119839] Modules linked in: [ 111.119846] Pid: 5731, comm: Xorg Tainted: G W 2.6.30-rc1 #69 [ 111.119851] Call Trace: [ 111.119863] [<ffffffff8025ce68>] warn_slowpath+0xd8/0x130 [ 111.119873] [<ffffffff8028a30f>] ? __lock_acquire+0x19f/0x1ae0 [ 111.119882] [<ffffffff8028a30f>] ? __lock_acquire+0x19f/0x1ae0 [ 111.119891] [<ffffffff802199b0>] ? native_sched_clock+0x20/0x70 [ 111.119899] [<ffffffff80286dee>] ? put_lock_stats+0xe/0x30 [ 111.119906] [<ffffffff80286eb8>] ? lock_release_holdtime+0xa8/0x150 [ 111.119913] [<ffffffff802c8ae7>] ring_buffer_lock_reserve+0x1b7/0x1d0 [ 111.119921] [<ffffffff802cd110>] trace_buffer_lock_reserve+0x30/0x70 [ 111.119930] [<ffffffff802ce000>] trace_current_buffer_lock_reserve+0x20/0x30 [ 111.119939] [<ffffffff802474e8>] ftrace_raw_event_sched_switch+0x58/0x100 [ 111.119948] [<ffffffff808103b7>] __schedule+0x3a7/0x4cd [ 111.119957] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.119964] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.119971] [<ffffffff80810c08>] schedule+0x18/0x40 [ 111.119977] [<ffffffff80810e09>] preempt_schedule+0x39/0x60 [ 111.119985] [<ffffffff80813bd3>] _read_unlock+0x53/0x60 [ 111.119993] [<ffffffff807259d2>] sock_def_readable+0x72/0x80 [ 111.120002] [<ffffffff807ad5ed>] unix_stream_sendmsg+0x24d/0x3d0 [ 111.120011] [<ffffffff807219a3>] sock_aio_write+0x143/0x160 [ 111.120019] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120026] [<ffffffff80721860>] ? sock_aio_write+0x0/0x160 [ 111.120033] [<ffffffff80721860>] ? sock_aio_write+0x0/0x160 [ 111.120042] [<ffffffff8031c283>] do_sync_readv_writev+0xf3/0x140 [ 111.120049] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120057] [<ffffffff80276ff0>] ? autoremove_wake_function+0x0/0x40 [ 111.120067] [<ffffffff8045d489>] ? cap_file_permission+0x9/0x10 [ 111.120074] [<ffffffff8045c1e6>] ? security_file_permission+0x16/0x20 [ 111.120082] [<ffffffff8031cab4>] do_readv_writev+0xd4/0x1f0 [ 111.120089] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120097] [<ffffffff80211b56>] ? ftrace_call+0x5/0x2b [ 111.120105] [<ffffffff8031cc18>] vfs_writev+0x48/0x70 [ 111.120111] [<ffffffff8031cd65>] sys_writev+0x55/0xc0 [ 111.120119] [<ffffffff80211e32>] system_call_fastpath+0x16/0x1b [ 111.120125] ---[ end trace 15605f4e98d5ccb5 ]--- [ Impact: fix spurious warning triggering tracing shutdown ] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-04-20 01:39:33 +04:00
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
preempt_enable_notrace();
ring-buffer: add ring_buffer_discard_commit The ring_buffer_discard_commit is similar to ring_buffer_event_discard but it can only be done on an event that has yet to be commited. Unpredictable results can happen otherwise. The main difference between ring_buffer_discard_commit and ring_buffer_event_discard is that ring_buffer_discard_commit will try to free the data in the ring buffer if nothing has addded data after the reserved event. If something did, then it acts almost the same as ring_buffer_event_discard followed by a ring_buffer_unlock_commit. Note, either ring_buffer_commit_discard and ring_buffer_unlock_commit can be called on an event, not both. This commit also exports both discard functions to be usable by GPL modules. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02 08:09:41 +04:00
}
EXPORT_SYMBOL_GPL(ring_buffer_discard_commit);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_write - write data to the buffer without reserving
* @buffer: The ring buffer to write to.
* @length: The length of the data being written (excluding the event header)
* @data: The data to write to the buffer.
*
* This is like ring_buffer_lock_reserve and ring_buffer_unlock_commit as
* one function. If you already have the data to write to the buffer, it
* may be easier to simply call this function.
*
* Note, like ring_buffer_lock_reserve, the length is the length of the data
* and not the length of the event which would hold the header.
*/
int ring_buffer_write(struct ring_buffer *buffer,
tracing: Trivial cleanup Remove ftrace_format_syscall() declaration; it is neither defined nor used. Also update a comment and formatting. Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.com Signed-off-by: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-08 03:46:24 +04:00
unsigned long length,
void *data)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event;
void *body;
int ret = -EBUSY;
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
int cpu;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
preempt_disable_notrace();
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
ring-buffer: Move disabled check into preempt disable section The ring buffer resizing and resetting relies on a schedule RCU action. The buffers are disabled, a synchronize_sched() is called and then the resize or reset takes place. But this only works if the disabling of the buffers are within the preempt disabled section, otherwise a window exists that the buffers can be written to while a reset or resize takes place. Cc: stable@kernel.org Reported-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <4B949E43.2010906@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-08 09:50:43 +03:00
if (atomic_read(&buffer->record_disabled))
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu = raw_smp_processor_id();
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
if (atomic_read(&cpu_buffer->record_disabled))
goto out;
ring-buffer: move calculation of event length The event length is calculated and passed in to rb_reserve_next_event in two different locations. Having rb_reserve_next_event do the calculations directly makes only one location to do the change and causes the calculation to be inlined by gcc. Before: text data bss dec hex filename 16538 24 12 16574 40be kernel/trace/ring_buffer.o After: text data bss dec hex filename 16490 24 12 16526 408e kernel/trace/ring_buffer.o [ Impact: smaller more efficient code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-11 22:42:53 +04:00
if (length > BUF_MAX_DATA_SIZE)
goto out;
ring-buffer: Add trace_recursive checks to ring_buffer_write() The ring_buffer_write() function isn't protected by the trace recursive writes. Luckily, this function is not used as much and is unlikely to ever recurse. But it should still have the protection, because even a call to ring_buffer_lock_reserve() could cause ring buffer corruption if called when ring_buffer_write() is being used. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:48:56 +03:00
if (unlikely(trace_recursive_lock(cpu_buffer)))
goto out;
ring-buffer: check for swapped buffers in start of committing Because the irqsoff tracer can swap an internal CPU buffer, it is possible that a swap happens between the start of the write and before the committing bit is set (the committing bit will disable swapping). This patch adds a check for this and will fail the write if it detects it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:11:34 +04:00
event = rb_reserve_next_event(buffer, cpu_buffer, length);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
if (!event)
ring-buffer: Add trace_recursive checks to ring_buffer_write() The ring_buffer_write() function isn't protected by the trace recursive writes. Luckily, this function is not used as much and is unlikely to ever recurse. But it should still have the protection, because even a call to ring_buffer_lock_reserve() could cause ring buffer corruption if called when ring_buffer_write() is being used. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:48:56 +03:00
goto out_unlock;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
body = rb_event_data(event);
memcpy(body, data, length);
rb_commit(cpu_buffer, event);
tracing/ring-buffer: Move poll wake ups into ring buffer code Move the logic to wake up on ring buffer data into the ring buffer code itself. This simplifies the tracing code a lot and also has the added benefit that waiters on one of the instance buffers can be woken only when data is added to that instance instead of data added to any instance. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-01 04:59:17 +04:00
rb_wakeups(buffer, cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ret = 0;
ring-buffer: Add trace_recursive checks to ring_buffer_write() The ring_buffer_write() function isn't protected by the trace recursive writes. Luckily, this function is not used as much and is unlikely to ever recurse. But it should still have the protection, because even a call to ring_buffer_lock_reserve() could cause ring buffer corruption if called when ring_buffer_write() is being used. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-27 17:48:56 +03:00
out_unlock:
trace_recursive_unlock(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
out:
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 17:36:50 +04:00
preempt_enable_notrace();
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return ret;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_write);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: rb_per_cpu_empty() can return boolean Makes rb_per_cpu_empty() return bool to improve readability. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-6-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:33 +03:00
static bool rb_per_cpu_empty(struct ring_buffer_per_cpu *cpu_buffer)
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
{
struct buffer_page *reader = cpu_buffer->reader_page;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
struct buffer_page *head = rb_set_head_page(cpu_buffer);
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
struct buffer_page *commit = cpu_buffer->commit_page;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/* In case of error, head will be NULL */
if (unlikely(!head))
ring-buffer: rb_per_cpu_empty() can return boolean Makes rb_per_cpu_empty() return bool to improve readability. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-6-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:33 +03:00
return true;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
return reader->read == rb_page_commit(reader) &&
(commit == reader ||
(commit == head &&
head->read == rb_page_commit(commit)));
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_record_disable - stop all writes into the buffer
* @buffer: The ring buffer to stop writes to.
*
* This prevents all writes to the buffer. Any attempt to write
* to the buffer after this will fail and return NULL.
*
* The caller should call synchronize_sched() after this.
*/
void ring_buffer_record_disable(struct ring_buffer *buffer)
{
atomic_inc(&buffer->record_disabled);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_record_disable);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_record_enable - enable writes to the buffer
* @buffer: The ring buffer to enable writes
*
* Note, multiple disables will need the same number of enables
Fix misspellings of "truly" in comments. Some comments misspell "truly"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-12 00:35:39 +03:00
* to truly enable the writing (much like preempt_disable).
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
void ring_buffer_record_enable(struct ring_buffer *buffer)
{
atomic_dec(&buffer->record_disabled);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_record_enable);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing/ring-buffer: Only have tracing_on disable tracing buffers As the ring-buffer code is being used by other facilities in the kernel, having tracing_on file disable *all* buffers is not a desired affect. It should only disable the ftrace buffers that are being used. Move the code into the trace.c file and use the buffer disabling for tracing_on() and tracing_off(). This way only the ftrace buffers will be affected by them and other kernel utilities will not be confused to why their output suddenly stopped. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-23 00:50:28 +04:00
/**
* ring_buffer_record_off - stop all writes into the buffer
* @buffer: The ring buffer to stop writes to.
*
* This prevents all writes to the buffer. Any attempt to write
* to the buffer after this will fail and return NULL.
*
* This is different than ring_buffer_record_disable() as
tracing/trivial: Fix some typos in kernel/trace Fix some typos in kernel/trace. Link: http://lkml.kernel.org/r/1343887320.2228.9.camel@louis-ThinkPad-T410 Signed-off-by: Wang Tianhong <wangthbj@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-08-02 10:02:00 +04:00
* it works like an on/off switch, where as the disable() version
tracing/ring-buffer: Only have tracing_on disable tracing buffers As the ring-buffer code is being used by other facilities in the kernel, having tracing_on file disable *all* buffers is not a desired affect. It should only disable the ftrace buffers that are being used. Move the code into the trace.c file and use the buffer disabling for tracing_on() and tracing_off(). This way only the ftrace buffers will be affected by them and other kernel utilities will not be confused to why their output suddenly stopped. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-23 00:50:28 +04:00
* must be paired with a enable().
*/
void ring_buffer_record_off(struct ring_buffer *buffer)
{
unsigned int rd;
unsigned int new_rd;
do {
rd = atomic_read(&buffer->record_disabled);
new_rd = rd | RB_BUFFER_OFF;
} while (atomic_cmpxchg(&buffer->record_disabled, rd, new_rd) != rd);
}
EXPORT_SYMBOL_GPL(ring_buffer_record_off);
/**
* ring_buffer_record_on - restart writes into the buffer
* @buffer: The ring buffer to start writes to.
*
* This enables all writes to the buffer that was disabled by
* ring_buffer_record_off().
*
* This is different than ring_buffer_record_enable() as
tracing/trivial: Fix some typos in kernel/trace Fix some typos in kernel/trace. Link: http://lkml.kernel.org/r/1343887320.2228.9.camel@louis-ThinkPad-T410 Signed-off-by: Wang Tianhong <wangthbj@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-08-02 10:02:00 +04:00
* it works like an on/off switch, where as the enable() version
tracing/ring-buffer: Only have tracing_on disable tracing buffers As the ring-buffer code is being used by other facilities in the kernel, having tracing_on file disable *all* buffers is not a desired affect. It should only disable the ftrace buffers that are being used. Move the code into the trace.c file and use the buffer disabling for tracing_on() and tracing_off(). This way only the ftrace buffers will be affected by them and other kernel utilities will not be confused to why their output suddenly stopped. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-23 00:50:28 +04:00
* must be paired with a disable().
*/
void ring_buffer_record_on(struct ring_buffer *buffer)
{
unsigned int rd;
unsigned int new_rd;
do {
rd = atomic_read(&buffer->record_disabled);
new_rd = rd & ~RB_BUFFER_OFF;
} while (atomic_cmpxchg(&buffer->record_disabled, rd, new_rd) != rd);
}
EXPORT_SYMBOL_GPL(ring_buffer_record_on);
/**
* ring_buffer_record_is_on - return true if the ring buffer can write
* @buffer: The ring buffer to see if write is enabled
*
* Returns true if the ring buffer is in a state that it accepts writes.
*/
int ring_buffer_record_is_on(struct ring_buffer *buffer)
{
return !atomic_read(&buffer->record_disabled);
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_record_disable_cpu - stop all writes into the cpu_buffer
* @buffer: The ring buffer to stop writes to.
* @cpu: The CPU buffer to stop
*
* This prevents all writes to the buffer. Any attempt to write
* to the buffer after this will fail and return NULL.
*
* The caller should call synchronize_sched() after this.
*/
void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
atomic_inc(&cpu_buffer->record_disabled);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_record_disable_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_record_enable_cpu - enable writes to the buffer
* @buffer: The ring buffer to enable writes
* @cpu: The CPU to enable.
*
* Note, multiple disables will need the same number of enables
Fix misspellings of "truly" in comments. Some comments misspell "truly"; this fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-12 00:35:39 +03:00
* to truly enable the writing (much like preempt_disable).
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
atomic_dec(&cpu_buffer->record_disabled);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_record_enable_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Place duplicate expression into a single function While discussing the strictness of the 80 character limit on the Kernel Summit Discussion mailing list, I showed examples that I broke that limit slightly with some algorithms. In discussing with John Linville, what looked better, I realized that two of the 80 char breaking culprits were an identical expression. As a clean up, this patch moves the identical expression into its own helper function and that is used instead. As a side effect, the offending code is now under the 80 character limit. :-) This clean up code also changes the expression from (A - B) - C to A - (B + C) This makes the code look a little nicer too. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-01 20:23:12 +04:00
/*
* The total entries in the ring buffer is the running counter
* of entries entered into the ring buffer, minus the sum of
* the entries read from the ring buffer and the number of
* entries that were overwritten.
*/
static inline unsigned long
rb_num_of_entries(struct ring_buffer_per_cpu *cpu_buffer)
{
return local_read(&cpu_buffer->entries) -
(local_read(&cpu_buffer->overrun) + cpu_buffer->read);
}
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
/**
* ring_buffer_oldest_event_ts - get the oldest event timestamp from the buffer
* @buffer: The ring buffer
* @cpu: The per CPU buffer to read from.
*/
ring-buffer: Change unsigned long type of ring_buffer_oldest_event_ts() to u64 ring_buffer_oldest_event_ts() should return a value of u64 type, because ring_buffer_per_cpu->buffer_page->buffer_data_page->time_stamp is u64 type. Link: http://lkml.kernel.org/r/1349998076-15495-5-git-send-email-dhsharp@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Signed-off-by: David Sharp <dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-10-12 03:27:54 +04:00
u64 ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu)
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
{
unsigned long flags;
struct ring_buffer_per_cpu *cpu_buffer;
struct buffer_page *bpage;
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "These are late-v3.7 pending fixes for tracing." Fix up trivial conflict in kernel/trace/ring_buffer.c: the NULL pointer fix clashed with the change of type of the 'ret' variable. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ring-buffer: Fix race between integrity check and readers ring-buffer: Fix NULL pointer if rb_set_head_page() fails ftrace: Clear bits properly in reset_iter_read()
2012-12-12 06:18:58 +04:00
u64 ret = 0;
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-26 19:03:38 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
/*
* if the tail is on reader_page, oldest time stamp is on the reader
* page
*/
if (cpu_buffer->tail_page == cpu_buffer->reader_page)
bpage = cpu_buffer->reader_page;
else
bpage = rb_set_head_page(cpu_buffer);
ring-buffer: Fix NULL pointer if rb_set_head_page() fails The function rb_set_head_page() searches the list of ring buffer pages for a the page that has the HEAD page flag set. If it does not find it, it will do a WARN_ON(), disable the ring buffer and return NULL, as this should never happen. But if this bug happens to happen, not all callers of this function can handle a NULL pointer being returned from it. That needs to be fixed. Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:27:22 +04:00
if (bpage)
ret = bpage->page->time_stamp;
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-26 19:03:38 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_oldest_event_ts);
/**
* ring_buffer_bytes_cpu - get the number of bytes consumed in a cpu buffer
* @buffer: The ring buffer
* @cpu: The per CPU buffer to read from.
*/
unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long ret;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
ret = local_read(&cpu_buffer->entries_bytes) - cpu_buffer->read_bytes;
return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_bytes_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_entries_cpu - get the number of entries in a cpu buffer
* @buffer: The ring buffer
* @cpu: The per CPU buffer to get the entries from.
*/
unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
ring-buffer: Place duplicate expression into a single function While discussing the strictness of the 80 character limit on the Kernel Summit Discussion mailing list, I showed examples that I broke that limit slightly with some algorithms. In discussing with John Linville, what looked better, I realized that two of the 80 char breaking culprits were an identical expression. As a clean up, this patch moves the identical expression into its own helper function and that is used instead. As a side effect, the offending code is now under the 80 character limit. :-) This clean up code also changes the expression from (A - B) - C to A - (B + C) This makes the code look a little nicer too. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-01 20:23:12 +04:00
return rb_num_of_entries(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_entries_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
* ring_buffer_overrun_cpu - get the number of overruns caused by the ring
* buffer wrapping around (only if RB_FL_OVERWRITE is on).
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* @buffer: The ring buffer
* @cpu: The per CPU buffer to get the number of overruns from
*/
unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
unsigned long ret;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ret = local_read(&cpu_buffer->overrun);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
return ret;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: add counters for commit overrun and nmi dropped entries The WARN_ON in the ring buffer when a commit is preempted and the buffer is filled by preceding writes can happen in normal operations. The WARN_ON makes it look like a bug, not to mention, because it does not stop tracing and calls printk which can also recurse, this is prone to deadlock (the WARN_ON is not in a position to recurse). This patch removes the WARN_ON and replaces it with a counter that can be retrieved by a tracer. This counter is called commit_overrun. While at it, I added a nmi_dropped counter to count any time an NMI entry is dropped because the NMI could not take the spinlock. [ Impact: prevent deadlock by printing normal case warning ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-29 21:43:37 +04:00
/**
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
* ring_buffer_commit_overrun_cpu - get the number of overruns caused by
* commits failing due to the buffer wrapping around while there are uncommitted
* events, such as during an interrupt storm.
ring-buffer: add counters for commit overrun and nmi dropped entries The WARN_ON in the ring buffer when a commit is preempted and the buffer is filled by preceding writes can happen in normal operations. The WARN_ON makes it look like a bug, not to mention, because it does not stop tracing and calls printk which can also recurse, this is prone to deadlock (the WARN_ON is not in a position to recurse). This patch removes the WARN_ON and replaces it with a counter that can be retrieved by a tracer. This counter is called commit_overrun. While at it, I added a nmi_dropped counter to count any time an NMI entry is dropped because the NMI could not take the spinlock. [ Impact: prevent deadlock by printing normal case warning ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-29 21:43:37 +04:00
* @buffer: The ring buffer
* @cpu: The per CPU buffer to get the number of overruns from
*/
unsigned long
ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long ret;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ret = local_read(&cpu_buffer->commit_overrun);
ring-buffer: add counters for commit overrun and nmi dropped entries The WARN_ON in the ring buffer when a commit is preempted and the buffer is filled by preceding writes can happen in normal operations. The WARN_ON makes it look like a bug, not to mention, because it does not stop tracing and calls printk which can also recurse, this is prone to deadlock (the WARN_ON is not in a position to recurse). This patch removes the WARN_ON and replaces it with a counter that can be retrieved by a tracer. This counter is called commit_overrun. While at it, I added a nmi_dropped counter to count any time an NMI entry is dropped because the NMI could not take the spinlock. [ Impact: prevent deadlock by printing normal case warning ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-29 21:43:37 +04:00
return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_commit_overrun_cpu);
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
/**
* ring_buffer_dropped_events_cpu - get the number of dropped events caused by
* the ring buffer filling up (only if RB_FL_OVERWRITE is off).
* @buffer: The ring buffer
* @cpu: The per CPU buffer to get the number of overruns from
*/
unsigned long
ring_buffer_dropped_events_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long ret;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
ret = local_read(&cpu_buffer->dropped_events);
return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_dropped_events_cpu);
ring-buffer: Add stats field for amount read from trace ring buffer Add a stat about the number of events read from the ring buffer: # cat /debug/tracing/per_cpu/cpu0/stats entries: 39869 overrun: 870512 commit overrun: 0 bytes: 1449912 oldest event ts: 6561.368690 now ts: 6565.246426 dropped events: 0 read events: 112 <-- Added Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-01-30 02:45:49 +04:00
/**
* ring_buffer_read_events_cpu - get the number of events successfully read
* @buffer: The ring buffer
* @cpu: The per CPU buffer to get the number of events read
*/
unsigned long
ring_buffer_read_events_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
return cpu_buffer->read;
}
EXPORT_SYMBOL_GPL(ring_buffer_read_events_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_entries - get the number of entries in a buffer
* @buffer: The ring buffer
*
* Returns the total number of entries in the ring buffer
* (all CPU entries)
*/
unsigned long ring_buffer_entries(struct ring_buffer *buffer)
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long entries = 0;
int cpu;
/* if you care about this being correct, lock the buffer */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
ring-buffer: Place duplicate expression into a single function While discussing the strictness of the 80 character limit on the Kernel Summit Discussion mailing list, I showed examples that I broke that limit slightly with some algorithms. In discussing with John Linville, what looked better, I realized that two of the 80 char breaking culprits were an identical expression. As a clean up, this patch moves the identical expression into its own helper function and that is used instead. As a side effect, the offending code is now under the 80 character limit. :-) This clean up code also changes the expression from (A - B) - C to A - (B + C) This makes the code look a little nicer too. Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-09-01 20:23:12 +04:00
entries += rb_num_of_entries(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
return entries;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_entries);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
tracing: Fix comment typo and documentation example Trivial patch to fix a documentation example and to fix a comment. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233646.871719877@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-24 03:36:18 +04:00
* ring_buffer_overruns - get the number of overruns in buffer
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* @buffer: The ring buffer
*
* Returns the total number of overruns in the ring buffer
* (all CPU entries)
*/
unsigned long ring_buffer_overruns(struct ring_buffer *buffer)
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long overruns = 0;
int cpu;
/* if you care about this being correct, lock the buffer */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
overruns += local_read(&cpu_buffer->overrun);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
return overruns;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_overruns);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: fix deadlock from reader_lock in read_start Impact: deadlock fix in ring_buffer_read_start The ring_buffer_iter_reset was called from ring_buffer_read_start where both grabbed the reader_lock. This patch separates out the internals of ring_buffer_iter_reset to its own function so that both APIs may grab the reader_lock. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 08:01:26 +03:00
static void rb_iter_reset(struct ring_buffer_iter *iter)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
/* Iterator usage is expected to have record disabled */
ring-buffer: Always reset iterator to reader page When performing a consuming read, the ring buffer swaps out a page from the ring buffer with a empty page and this page that was swapped out becomes the new reader page. The reader page is owned by the reader and since it was swapped out of the ring buffer, writers do not have access to it (there's an exception to that rule, but it's out of scope for this commit). When reading the "trace" file, it is a non consuming read, which means that the data in the ring buffer will not be modified. When the trace file is opened, a ring buffer iterator is allocated and writes to the ring buffer are disabled, such that the iterator will not have issues iterating over the data. Although the ring buffer disabled writes, it does not disable other reads, or even consuming reads. If a consuming read happens, then the iterator is reset and starts reading from the beginning again. My tests would sometimes trigger this bug on my i386 box: WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa() Modules linked in: CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0 ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M Call Trace: [<c18796b3>] dump_stack+0x4b/0x75 [<c103a0e3>] warn_slowpath_common+0x7e/0x95 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c103a185>] warn_slowpath_fmt+0x33/0x35 [<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M [<c10bed04>] trace_find_cmdline+0x40/0x64 [<c10c3c16>] trace_print_context+0x27/0xec [<c10c4360>] ? trace_seq_printf+0x37/0x5b [<c10c0b15>] print_trace_line+0x319/0x39b [<c10ba3fb>] ? ring_buffer_read+0x47/0x50 [<c10c13b1>] s_show+0x192/0x1ab [<c10bfd9a>] ? s_next+0x5a/0x7c [<c112e76e>] seq_read+0x267/0x34c [<c1115a25>] vfs_read+0x8c/0xef [<c112e507>] ? seq_lseek+0x154/0x154 [<c1115ba2>] SyS_read+0x54/0x7f [<c188488e>] syscall_call+0x7/0xb ---[ end trace 3f507febd6b4cc83 ]--- >>>> ##### CPU 1 buffer started #### Which was the __trace_find_cmdline() function complaining about the pid in the event record being negative. After adding more test cases, this would trigger more often. Strangely enough, it would never trigger on a single test, but instead would trigger only when running all the tests. I believe that was the case because it required one of the tests to be shutting down via delayed instances while a new test started up. After spending several days debugging this, I found that it was caused by the iterator becoming corrupted. Debugging further, I found out why the iterator became corrupted. It happened with the rb_iter_reset(). As consuming reads may not read the full reader page, and only part of it, there's a "read" field to know where the last read took place. The iterator, must also start at the read position. In the rb_iter_reset() code, if the reader page was disconnected from the ring buffer, the iterator would start at the head page within the ring buffer (where writes still happen). But the mistake there was that it still used the "read" field to start the iterator on the head page, where it should always start at zero because readers never read from within the ring buffer where writes occur. I originally wrote a patch to have it set the iter->head to 0 instead of iter->head_page->read, but then I questioned why it wasn't always setting the iter to point to the reader page, as the reader page is still valid. The list_empty(reader_page->list) just means that it was successful in swapping out. But the reader_page may still have data. There was a bug report a long time ago that was not reproducible that had something about trace_pipe (consuming read) not matching trace (iterator read). This may explain why that happened. Anyway, the correct answer to this bug is to always use the reader page an not reset the iterator to inside the writable ring buffer. Cc: stable@vger.kernel.org # 2.6.28+ Fixes: d769041f8653 "ring_buffer: implement new locking" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-08-06 22:11:33 +04:00
iter->head_page = cpu_buffer->reader_page;
iter->head = cpu_buffer->reader_page->read;
iter->cache_reader_page = iter->head_page;
ring-buffer: Fix infinite spin in reading buffer Commit 651e22f2701b "ring-buffer: Always reset iterator to reader page" fixed one bug but in the process caused another one. The reset is to update the header page, but that fix also changed the way the cached reads were updated. The cache reads are used to test if an iterator needs to be updated or not. A ring buffer iterator, when created, disables writes to the ring buffer but does not stop other readers or consuming reads from happening. Although all readers are synchronized via a lock, they are only synchronized when in the ring buffer functions. Those functions may be called by any number of readers. The iterator continues down when its not interrupted by a consuming reader. If a consuming read occurs, the iterator starts from the beginning of the buffer. The way the iterator sees that a consuming read has happened since its last read is by checking the reader "cache". The cache holds the last counts of the read and the reader page itself. Commit 651e22f2701b changed what was saved by the cache_read when the rb_iter_reset() occurred, making the iterator never match the cache. Then if the iterator calls rb_iter_reset(), it will go into an infinite loop by checking if the cache doesn't match, doing the reset and retrying, just to see that the cache still doesn't match! Which should never happen as the reset is suppose to set the cache to the current value and there's locks that keep a consuming reader from having access to the data. Fixes: 651e22f2701b "ring-buffer: Always reset iterator to reader page" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-10-03 00:51:18 +04:00
iter->cache_read = cpu_buffer->read;
ring-buffer: Always reset iterator to reader page When performing a consuming read, the ring buffer swaps out a page from the ring buffer with a empty page and this page that was swapped out becomes the new reader page. The reader page is owned by the reader and since it was swapped out of the ring buffer, writers do not have access to it (there's an exception to that rule, but it's out of scope for this commit). When reading the "trace" file, it is a non consuming read, which means that the data in the ring buffer will not be modified. When the trace file is opened, a ring buffer iterator is allocated and writes to the ring buffer are disabled, such that the iterator will not have issues iterating over the data. Although the ring buffer disabled writes, it does not disable other reads, or even consuming reads. If a consuming read happens, then the iterator is reset and starts reading from the beginning again. My tests would sometimes trigger this bug on my i386 box: WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa() Modules linked in: CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0 ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M Call Trace: [<c18796b3>] dump_stack+0x4b/0x75 [<c103a0e3>] warn_slowpath_common+0x7e/0x95 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c103a185>] warn_slowpath_fmt+0x33/0x35 [<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M [<c10bed04>] trace_find_cmdline+0x40/0x64 [<c10c3c16>] trace_print_context+0x27/0xec [<c10c4360>] ? trace_seq_printf+0x37/0x5b [<c10c0b15>] print_trace_line+0x319/0x39b [<c10ba3fb>] ? ring_buffer_read+0x47/0x50 [<c10c13b1>] s_show+0x192/0x1ab [<c10bfd9a>] ? s_next+0x5a/0x7c [<c112e76e>] seq_read+0x267/0x34c [<c1115a25>] vfs_read+0x8c/0xef [<c112e507>] ? seq_lseek+0x154/0x154 [<c1115ba2>] SyS_read+0x54/0x7f [<c188488e>] syscall_call+0x7/0xb ---[ end trace 3f507febd6b4cc83 ]--- >>>> ##### CPU 1 buffer started #### Which was the __trace_find_cmdline() function complaining about the pid in the event record being negative. After adding more test cases, this would trigger more often. Strangely enough, it would never trigger on a single test, but instead would trigger only when running all the tests. I believe that was the case because it required one of the tests to be shutting down via delayed instances while a new test started up. After spending several days debugging this, I found that it was caused by the iterator becoming corrupted. Debugging further, I found out why the iterator became corrupted. It happened with the rb_iter_reset(). As consuming reads may not read the full reader page, and only part of it, there's a "read" field to know where the last read took place. The iterator, must also start at the read position. In the rb_iter_reset() code, if the reader page was disconnected from the ring buffer, the iterator would start at the head page within the ring buffer (where writes still happen). But the mistake there was that it still used the "read" field to start the iterator on the head page, where it should always start at zero because readers never read from within the ring buffer where writes occur. I originally wrote a patch to have it set the iter->head to 0 instead of iter->head_page->read, but then I questioned why it wasn't always setting the iter to point to the reader page, as the reader page is still valid. The list_empty(reader_page->list) just means that it was successful in swapping out. But the reader_page may still have data. There was a bug report a long time ago that was not reproducible that had something about trace_pipe (consuming read) not matching trace (iterator read). This may explain why that happened. Anyway, the correct answer to this bug is to always use the reader page an not reset the iterator to inside the writable ring buffer. Cc: stable@vger.kernel.org # 2.6.28+ Fixes: d769041f8653 "ring_buffer: implement new locking" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-08-06 22:11:33 +04:00
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
if (iter->head)
iter->read_stamp = cpu_buffer->read_stamp;
else
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
iter->read_stamp = iter->head_page->page->time_stamp;
ring-buffer: fix deadlock from reader_lock in read_start Impact: deadlock fix in ring_buffer_read_start The ring_buffer_iter_reset was called from ring_buffer_read_start where both grabbed the reader_lock. This patch separates out the internals of ring_buffer_iter_reset to its own function so that both APIs may grab the reader_lock. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 08:01:26 +03:00
}
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: fix deadlock from reader_lock in read_start Impact: deadlock fix in ring_buffer_read_start The ring_buffer_iter_reset was called from ring_buffer_read_start where both grabbed the reader_lock. This patch separates out the internals of ring_buffer_iter_reset to its own function so that both APIs may grab the reader_lock. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 08:01:26 +03:00
/**
* ring_buffer_iter_reset - reset an iterator
* @iter: The iterator to reset
*
* Resets the iterator, so that it will start from the beginning
* again.
*/
void ring_buffer_iter_reset(struct ring_buffer_iter *iter)
{
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: fix deadlock from reader_lock in read_start Impact: deadlock fix in ring_buffer_read_start The ring_buffer_iter_reset was called from ring_buffer_read_start where both grabbed the reader_lock. This patch separates out the internals of ring_buffer_iter_reset to its own function so that both APIs may grab the reader_lock. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 08:01:26 +03:00
unsigned long flags;
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
if (!iter)
return;
cpu_buffer = iter->cpu_buffer;
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
ring-buffer: fix deadlock from reader_lock in read_start Impact: deadlock fix in ring_buffer_read_start The ring_buffer_iter_reset was called from ring_buffer_read_start where both grabbed the reader_lock. This patch separates out the internals of ring_buffer_iter_reset to its own function so that both APIs may grab the reader_lock. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 08:01:26 +03:00
rb_iter_reset(iter);
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_iter_reset);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_iter_empty - check if an iterator has no more to read
* @iter: The iterator to check
*/
int ring_buffer_iter_empty(struct ring_buffer_iter *iter)
{
struct ring_buffer_per_cpu *cpu_buffer;
cpu_buffer = iter->cpu_buffer;
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
return iter->head_page == cpu_buffer->commit_page &&
iter->head == rb_commit_index(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_iter_empty);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
static void
rb_update_read_stamp(struct ring_buffer_per_cpu *cpu_buffer,
struct ring_buffer_event *event)
{
u64 delta;
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
switch (event->type_len) {
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_PADDING:
return;
case RINGBUF_TYPE_TIME_EXTEND:
delta = event->array[0];
delta <<= TS_SHIFT;
delta += event->time_delta;
cpu_buffer->read_stamp += delta;
return;
case RINGBUF_TYPE_TIME_STAMP:
/* FIXME: not implemented */
return;
case RINGBUF_TYPE_DATA:
cpu_buffer->read_stamp += event->time_delta;
return;
default:
BUG();
}
return;
}
static void
rb_update_iter_read_stamp(struct ring_buffer_iter *iter,
struct ring_buffer_event *event)
{
u64 delta;
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
switch (event->type_len) {
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_PADDING:
return;
case RINGBUF_TYPE_TIME_EXTEND:
delta = event->array[0];
delta <<= TS_SHIFT;
delta += event->time_delta;
iter->read_stamp += delta;
return;
case RINGBUF_TYPE_TIME_STAMP:
/* FIXME: not implemented */
return;
case RINGBUF_TYPE_DATA:
iter->read_stamp += event->time_delta;
return;
default:
BUG();
}
return;
}
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
static struct buffer_page *
rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
struct buffer_page *reader = NULL;
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
unsigned long overwrite;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
unsigned long flags;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
int nr_loops = 0;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
int ret;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
ring-buffer: convert to raw spinlocks Impact: no lockdep debugging of ring buffer The problem with running lockdep on the ring buffer is that the ring buffer is the core infrastructure of ftrace. What happens is that the tracer will start tracing the lockdep code while lockdep is testing the ring buffers locks. This can cause lockdep to fail due to testing cases that have not fully finished their locking transition. This patch converts the spin locks used by the ring buffer back into raw spin locks which lockdep does not check. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 08:09:43 +03:00
local_irq_save(flags);
locking: Convert __raw_spin* functions to arch_spin* Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 22:01:25 +03:00
arch_spin_lock(&cpu_buffer->lock);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
again:
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
/*
* This should normally only loop twice. But because the
* start of the reader inserts an empty page, it causes
* a case where we will loop three times. There should be no
* reason to loop four times (that I know of).
*/
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3)) {
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
reader = NULL;
goto out;
}
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
reader = cpu_buffer->reader_page;
/* If there's more to read, return this page */
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
if (cpu_buffer->reader_page->read < rb_page_size(reader))
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto out;
/* Never should we have an index greater than the size */
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer,
cpu_buffer->reader_page->read > rb_page_size(reader)))
goto out;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
/* check if we caught up to the tail */
reader = NULL;
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
if (cpu_buffer->commit_page == cpu_buffer->reader_page)
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Fix uninitialized read_stamp The ring buffer reader page is used to swap a page from the writable ring buffer. If the writer happens to be on that page, it ends up on the reader page, but will simply move off of it, back into the writable ring buffer as writes are added. The time stamp passed back to the readers is stored in the cpu_buffer per CPU descriptor. This stamp is updated when a swap of the reader page takes place, and it reads the current stamp from the page taken from the writable ring buffer. Everytime a writer goes to a new page, it updates the time stamp of that page. The problem happens if a reader reads a page from an empty per CPU ring buffer. If the buffer is empty, the swap still takes place, placing the writer at the start of the reader page. If at a later time, a write happens, it updates the page's time stamp and continues. But the problem is that the read_stamp does not get updated, because the page was already swapped. The solution to this was to not swap the page if the ring buffer happens to be empty. This also removes the side effect that the writes on the reader page will not get updated because the writer never gets back on the reader page without a swap. That is, if a read happens on an empty buffer, but then no reads happen for a while. If a swap took place, and the writer were to start writing a lot of data (function tracer), it will start overflowing the ring buffer and overwrite the older data. But because the writer never goes back onto the reader page, the data left on the reader page never gets overwritten. This causes the reader to see really old data, followed by a jump to newer data. Link: http://lkml.kernel.org/r/1340060577-9112-1-git-send-email-dhsharp@google.com Google-Bug-Id: 6410455 Reported-by: David Sharp <dhsharp@google.com> tested-by: David Sharp <dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-06-28 21:35:04 +04:00
/* Don't bother swapping if the ring buffer is empty */
if (rb_num_of_entries(cpu_buffer) == 0)
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/*
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
* Reset the reader page to size zero.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
local_set(&cpu_buffer->reader_page->write, 0);
local_set(&cpu_buffer->reader_page->entries, 0);
local_set(&cpu_buffer->reader_page->page->commit, 0);
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
cpu_buffer->reader_page->real_end = 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
spin:
/*
* Splice the empty reader page into the list around the head.
*/
reader = rb_set_head_page(cpu_buffer);
ring-buffer: Fix NULL pointer if rb_set_head_page() fails The function rb_set_head_page() searches the list of ring buffer pages for a the page that has the HEAD page flag set. If it does not find it, it will do a WARN_ON(), disable the ring buffer and return NULL, as this should never happen. But if this bug happens to happen, not all callers of this function can handle a NULL pointer being returned from it. That needs to be fixed. Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:27:22 +04:00
if (!reader)
goto out;
ring-buffer: Add rb_list_head() wrapper around new reader page next field If the very unlikely case happens where the writer moves the head by one between where the head page is read and where the new reader page is assigned _and_ the writer then writes and wraps the entire ring buffer so that the head page is back to what was originally read as the head page, the page to be swapped will have a corrupted next pointer. Simple solution is to wrap the assignment of the next pointer with a rb_list_head(). Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-07 04:40:44 +03:00
cpu_buffer->reader_page->list.next = rb_list_head(reader->list.next);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
cpu_buffer->reader_page->list.prev = reader->list.prev;
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
/*
* cpu_buffer->pages just needs to point to the buffer, it
* has no specific buffer page to point to. Lets move it out
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 05:57:33 +04:00
* of our way so we don't accidentally swap it.
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
*/
cpu_buffer->pages = reader->list.prev;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/* The reader page will be pointing to the new head */
rb_set_list_to_head(cpu_buffer, &cpu_buffer->reader_page->list);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
/*
* We want to make sure we read the overruns after we set up our
* pointers to the next object. The writer side does a
* cmpxchg to cross pages which acts as the mb on the writer
* side. Note, the reader will constantly fail the swap
* while the writer is updating the pointers, so this
* guarantees that the overwrite recorded here is the one we
* want to compare with the last_overrun.
*/
smp_mb();
overwrite = local_read(&(cpu_buffer->overrun));
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* Here's the tricky part.
*
* We need to move the pointer past the header page.
* But we can only do that if a writer is not currently
* moving it. The page before the header page has the
* flag bit '1' set if it is pointing to the page we want.
* but if the writer is in the process of moving it
* than it will be '2' or already moved '0'.
*/
ret = rb_head_page_replace(reader, cpu_buffer->reader_page);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/*
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
* If we did not convert it, then we must try again.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
if (!ret)
goto spin;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
/*
* Yeah! We succeeded in replacing the page.
*
* Now make the new head point back to the reader page.
*/
ring-buffer: Wrap a list.next reference with rb_list_head() This reference at the end of rb_get_reader_page() was causing off-by-one writes to the prev pointer of the page after the reader page when that page is the head page, and therefore the reader page has the RB_PAGE_HEAD flag in its list.next pointer. This eventually results in a GPF in a subsequent call to rb_set_head_page() (usually from rb_get_reader_page()) when that prev pointer is dereferenced. The dereferenced register would characteristically have an address that appears shifted left by one byte (eg, ffxxxxxxxxxxxxyy instead of ffffxxxxxxxxxxxx) due to being written at an address one byte too high. Signed-off-by: David Sharp <dhsharp@google.com> LKML-Reference: <1262826727-9090-1-git-send-email-dhsharp@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-07 04:12:07 +03:00
rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_inc_page(cpu_buffer, &cpu_buffer->head_page);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
/* Finally update the reader page to the new head */
cpu_buffer->reader_page = reader;
ring-buffer: Update read stamp with first real commit on page Do not update the read stamp after swapping out the reader page from the write buffer. If the reader page is swapped out of the buffer before an event is written to it, then the read_stamp may get an out of date timestamp, as the page timestamp is updated on the first commit to that page. rb_get_reader_page() only returns a page if it has an event on it, otherwise it will return NULL. At that point, check if the page being returned has events and has not been read yet. Then at that point update the read_stamp to match the time stamp of the reader page. Cc: stable@vger.kernel.org # 2.6.30+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-23 18:35:36 +03:00
cpu_buffer->reader_page->read = 0;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
if (overwrite != cpu_buffer->last_overrun) {
cpu_buffer->lost_events = overwrite - cpu_buffer->last_overrun;
cpu_buffer->last_overrun = overwrite;
}
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
goto again;
out:
ring-buffer: Update read stamp with first real commit on page Do not update the read stamp after swapping out the reader page from the write buffer. If the reader page is swapped out of the buffer before an event is written to it, then the read_stamp may get an out of date timestamp, as the page timestamp is updated on the first commit to that page. rb_get_reader_page() only returns a page if it has an event on it, otherwise it will return NULL. At that point, check if the page being returned has events and has not been read yet. Then at that point update the read_stamp to match the time stamp of the reader page. Cc: stable@vger.kernel.org # 2.6.30+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-11-23 18:35:36 +03:00
/* Update the read_stamp on the first event */
if (reader && reader->read == 0)
cpu_buffer->read_stamp = reader->page->time_stamp;
locking: Convert __raw_spin* functions to arch_spin* Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 22:01:25 +03:00
arch_spin_unlock(&cpu_buffer->lock);
ring-buffer: convert to raw spinlocks Impact: no lockdep debugging of ring buffer The problem with running lockdep on the ring buffer is that the ring buffer is the core infrastructure of ftrace. What happens is that the tracer will start tracing the lockdep code while lockdep is testing the ring buffers locks. This can cause lockdep to fail due to testing cases that have not fully finished their locking transition. This patch converts the spin locks used by the ring buffer back into raw spin locks which lockdep does not check. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-06 08:09:43 +03:00
local_irq_restore(flags);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
return reader;
}
static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer)
{
struct ring_buffer_event *event;
struct buffer_page *reader;
unsigned length;
reader = rb_get_reader_page(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
/* This function should not be called when buffer is empty */
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer, !reader))
return;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
event = rb_reader_event(cpu_buffer);
ring-buffer: do not count discarded events The latency tracers report the number of items in the trace buffer. This uses the ring buffer data to calculate this. Because discarded events are also counted, the numbers do not match the number of items that are printed. The ring buffer also adds a "padding" item to the end of each buffer page which also gets counted as a discarded item. This patch decrements the counter to the page entries on a discard. This allows us to ignore discarded entries while reading the buffer. Decrementing the counter is still safe since it can only happen while the committing flag is still set. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:23:58 +04:00
if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
ring-buffer: convert cpu buffer entries to local_t The entries counter in cpu buffer is not atomic. It can be updated by other interrupts or from another CPU (readers). But making entries into "atomic_t" causes an atomic operation that can hurt performance. Instead we convert it to a local_t that will increment a counter with a local CPU atomic operation (if the arch supports it). Instead of fighting with readers and overwrites that decrement the counter, I added a "read" counter. Every time a reader reads an entry it is incremented. We already have a overrun counter and with that, the entries counter and the read counter, we can calculate the total number of entries in the buffer with: (entries - overrun) - read As long as the total number of entries in the ring buffer is less than the word size, this will work. But since the entries counter was previously a long, this is no different than what we had before. Thanks to Andrew Morton for pointing out in the first version that atomic_t does not replace unsigned long. I switched to atomic_long_t even though it is signed. A negative count is most likely a bug. [ Impact: keep accurate count of cpu buffer entries ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-01 04:49:44 +04:00
cpu_buffer->read++;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
rb_update_read_stamp(cpu_buffer, event);
length = rb_event_length(event);
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
cpu_buffer->reader_page->read += length;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
static void rb_advance_iter(struct ring_buffer_iter *iter)
{
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event;
unsigned length;
cpu_buffer = iter->cpu_buffer;
/*
* Check if we are at the end of the buffer.
*/
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
if (iter->head >= rb_page_size(iter->head_page)) {
ring-buffer: discard timestamps that are at the start of the buffer Every buffer page in the ring buffer includes its own time stamp. When an event is recorded to the ring buffer with a delta time greater than what can be held in the event header, a time stamp event is created. If the the create timestamp falls over to the next buffer page, it is redundant because the buffer page holds a full time stamp. This patch will try to discard the time stamp when it falls to the start of the next page. This change also fixes a issues with disarding events. If most events are discarded, timestamps will start to creep into the ring buffer. If we do not discard the timestamps then they can fill up the ring buffer over time and waste space. This change will keep time stamps from filling up over another page. If something is recorded in the buffer page, and the rest is filtered, then the time stamps can only fill up to the end of the page. [ Impact: prevent time stamps from filling ring buffer ] Reported-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-03 17:30:10 +04:00
/* discarded commits can make the page empty */
if (iter->head_page == cpu_buffer->commit_page)
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
return;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
rb_inc_iter(iter);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return;
}
event = rb_iter_head_event(iter);
length = rb_event_length(event);
/*
* This should not be called to advance the header if we are
* at the tail of the buffer.
*/
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
if (RB_WARN_ON(cpu_buffer,
ring-buffer: replace most bug ons with warn on and disable buffer This patch replaces most of the BUG_ONs in the ring_buffer code with RB_WARN_ON variants. It adds some more variants as needed for the replacement. This lets the buffer die nicely and still warn the user. One BUG_ON remains in the code, and that is because it detects a bad pointer passed in by the calling function, and not a bug by the ring buffer code itself. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 07:07:30 +03:00
(iter->head_page == cpu_buffer->commit_page) &&
ring-buffer: clean up warn ons Impact: Restructure WARN_ONs in ring_buffer.c The current WARN_ON macros in ring_buffer.c are quite ugly. This patch cleans them up and uses a single RB_WARN_ON that returns the value of the condition. This allows the caller to abort the function if the condition is true. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 23:28:41 +03:00
(iter->head + length > rb_commit_index(cpu_buffer))))
return;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
rb_update_iter_read_stamp(iter, event);
iter->head += length;
/* check for end of page padding */
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
if ((iter->head >= rb_page_size(iter->head_page)) &&
(iter->head_page != cpu_buffer->commit_page))
ring-buffer: Remove unnecessary recusive call in rb_advance_iter() The original ring-buffer code had special checks at the start of rb_advance_iter() and instead of repeating them again at the end of the function if a certain condition existed, I just did a recursive call to rb_advance_iter() because the special condition would cause rb_advance_iter() to return early (after the checks). But as things have changed, the special checks no longer exist and the only thing done for the special_condition is to call rb_inc_iter() and return. Instead of doing a confusing recursive call, just call rb_inc_iter instead. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 19:41:57 +04:00
rb_inc_iter(iter);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
static int rb_lost_events(struct ring_buffer_per_cpu *cpu_buffer)
{
return cpu_buffer->lost_events;
}
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
static struct ring_buffer_event *
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
rb_buffer_peek(struct ring_buffer_per_cpu *cpu_buffer, u64 *ts,
unsigned long *lost_events)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_event *event;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
struct buffer_page *reader;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
int nr_loops = 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
again:
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
/*
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
* We repeat when a time extend is encountered.
* Since the time extend is always attached to a data event,
* we should never loop more than once.
* (We never hit the following condition more than twice).
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
*/
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 2))
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
return NULL;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
reader = rb_get_reader_page(cpu_buffer);
if (!reader)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return NULL;
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
event = rb_reader_event(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
switch (event->type_len) {
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_PADDING:
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
if (rb_null_event(event))
RB_WARN_ON(cpu_buffer, 1);
/*
* Because the writer could be discarding every
* event it creates (which would probably be bad)
* if we were to go back to "again" then we may never
* catch up, and will trigger the warn on, or lock
* the box. Return the padding, and we will release
* the current locks, and try again.
*/
return event;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_TIME_EXTEND:
/* Internal data, OK to advance */
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
rb_advance_reader(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
goto again;
case RINGBUF_TYPE_TIME_STAMP:
/* FIXME: not implemented */
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
rb_advance_reader(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
goto again;
case RINGBUF_TYPE_DATA:
if (ts) {
*ts = cpu_buffer->read_stamp + event->time_delta;
ring-buffer: consolidate interface of rb_buffer_peek() rb_buffer_peek() operates with struct ring_buffer_per_cpu *cpu_buffer only. Thus, instead of passing variables buffer and cpu it is better to use cpu_buffer directly. This also reduces the risk of races since cpu_buffer is not calculated twice. Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <1249045084-3028-1-git-send-email-robert.richter@amd.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-31 16:58:04 +04:00
ring_buffer_normalize_time_stamp(cpu_buffer->buffer,
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
cpu_buffer->cpu, ts);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
if (lost_events)
*lost_events = rb_lost_events(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return event;
default:
BUG();
}
return NULL;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_peek);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
static struct ring_buffer_event *
rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer *buffer;
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
int nr_loops = 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = iter->cpu_buffer;
buffer = cpu_buffer->buffer;
ring-buffer: Check if ring buffer iterator has stale data Usually reads of the ring buffer is performed by a single task. There are two types of reads from the ring buffer. One is a consuming read which will consume the entry that was read and the next read will be the entry that follows. The other is an iterator that will let the user read the contents of the ring buffer without modifying it. When an iterator is allocated, writes to the ring buffer are disabled to protect the iterator. The problem exists when consuming reads happen while an iterator is allocated. Specifically, the kind of read that swaps out an entire page (used by splice) and replaces it with a new read. If the iterator is on the page that is swapped out, then the next read may read from this swapped out page and return garbage. This patch adds a check when reading the iterator to make sure that the iterator contents are still valid. If a consuming read has taken place, the iterator is reset. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-25 23:17:47 +03:00
/*
* Check if someone performed a consuming read to
* the buffer. A consuming read invalidates the iterator
* and we need to reset the iterator in this case.
*/
if (unlikely(iter->cache_read != cpu_buffer->read ||
iter->cache_reader_page != cpu_buffer->reader_page))
rb_iter_reset(iter);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
again:
ring-buffer: Check for end of page in iterator If the iterator comes to an empty page for some reason, or if the page is emptied by a consuming read. The iterator code currently does not check if the iterator is pass the contents, and may return a false entry. This patch adds a check to the ring buffer iterator to test if the current page has been completely read and sets the iterator to the next page if necessary. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-27 00:14:08 +03:00
if (ring_buffer_iter_empty(iter))
return NULL;
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
/*
ring-buffer: Up rb_iter_peek() loop count to 3 After writting a test to try to trigger the bug that caused the ring buffer iterator to become corrupted, I hit another bug: WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238() Modules linked in: ipt_MASQUERADE sunrpc [...] CPU: 1 PID: 5281 Comm: grep Tainted: G W 3.16.0-rc3-test+ #143 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000 ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010 ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003 Call Trace: [<ffffffff81503fb0>] ? dump_stack+0x4a/0x75 [<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c [<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96 [<ffffffff810c74a3>] ? s_start+0xd7/0x17b [<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea [<ffffffff8114cf94>] ? seq_read+0x148/0x361 [<ffffffff81132d98>] ? vfs_read+0x93/0xf1 [<ffffffff81132f1b>] ? SyS_read+0x60/0x8e [<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2 Debugging this bug, which triggers when the rb_iter_peek() loops too many times (more than 2 times), I discovered there's a case that can cause that function to legitimately loop 3 times! rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek() only deals with the reader page (it's for consuming reads). The rb_iter_peek() is for traversing the buffer without consuming it, and as such, it can loop for one more reason. That is, if we hit the end of the reader page or any page, it will go to the next page and try again. That is, we have this: 1. iter->head > iter->head_page->page->commit (rb_inc_iter() which moves the iter to the next page) try again 2. event = rb_iter_head_event() event->type_len == RINGBUF_TYPE_TIME_EXTEND rb_advance_iter() try again 3. read the event. But we never get to 3, because the count is greater than 2 and we cause the WARNING and return NULL. Up the counter to 3. Cc: stable@vger.kernel.org # 2.6.37+ Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-08-06 23:36:31 +04:00
* We repeat when a time extend is encountered or we hit
* the end of the page. Since the time extend is always attached
* to a data event, we should never loop more than three times.
* Once for going to next page, once on time extend, and
* finally once to get the event.
* (We never hit the following condition more than thrice).
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
*/
ring-buffer: Up rb_iter_peek() loop count to 3 After writting a test to try to trigger the bug that caused the ring buffer iterator to become corrupted, I hit another bug: WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238() Modules linked in: ipt_MASQUERADE sunrpc [...] CPU: 1 PID: 5281 Comm: grep Tainted: G W 3.16.0-rc3-test+ #143 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000 ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010 ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003 Call Trace: [<ffffffff81503fb0>] ? dump_stack+0x4a/0x75 [<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c [<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96 [<ffffffff810c74a3>] ? s_start+0xd7/0x17b [<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea [<ffffffff8114cf94>] ? seq_read+0x148/0x361 [<ffffffff81132d98>] ? vfs_read+0x93/0xf1 [<ffffffff81132f1b>] ? SyS_read+0x60/0x8e [<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2 Debugging this bug, which triggers when the rb_iter_peek() loops too many times (more than 2 times), I discovered there's a case that can cause that function to legitimately loop 3 times! rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek() only deals with the reader page (it's for consuming reads). The rb_iter_peek() is for traversing the buffer without consuming it, and as such, it can loop for one more reason. That is, if we hit the end of the reader page or any page, it will go to the next page and try again. That is, we have this: 1. iter->head > iter->head_page->page->commit (rb_inc_iter() which moves the iter to the next page) try again 2. event = rb_iter_head_event() event->type_len == RINGBUF_TYPE_TIME_EXTEND rb_advance_iter() try again 3. read the event. But we never get to 3, because the count is greater than 2 and we cause the WARNING and return NULL. Up the counter to 3. Cc: stable@vger.kernel.org # 2.6.37+ Fixes: 69d1b839f7ee "ring-buffer: Bind time extend and data events together" Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-08-06 23:36:31 +04:00
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 3))
tracing, ring-buffer: add paranoid checks for loops While writing a new tracer, I had a bug where I caused the ring-buffer to recurse in a bad way. The bug was with the tracer I was writing and not the ring-buffer itself. But it took a long time to find the problem. This patch adds paranoid checks into the ring-buffer infrastructure that will catch bugs of this nature. Note: I put the bug back in the tracer and this patch showed the error nicely and prevented the lockup. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-31 16:58:35 +03:00
return NULL;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
if (rb_per_cpu_empty(cpu_buffer))
return NULL;
ring-buffer: Use rb_page_size() instead of open coded head_page size There's a helper function to get a ring buffer page size (the number of bytes of data recorded on the page), called rb_page_size(). Use that instead of open coding it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-24 03:45:12 +04:00
if (iter->head >= rb_page_size(iter->head_page)) {
ring-buffer: Check for end of page in iterator If the iterator comes to an empty page for some reason, or if the page is emptied by a consuming read. The iterator code currently does not check if the iterator is pass the contents, and may return a false entry. This patch adds a check to the ring buffer iterator to test if the current page has been completely read and sets the iterator to the next page if necessary. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-27 00:14:08 +03:00
rb_inc_iter(iter);
goto again;
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
event = rb_iter_head_event(iter);
ring_buffer: compressed event header RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes an 'u32' to save the actually length for events which data size > 28. This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA. [ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> LKML-Reference: <49F13189.3090000@cn.fujitsu.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-24 07:27:05 +04:00
switch (event->type_len) {
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_PADDING:
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
if (rb_null_event(event)) {
rb_inc_iter(iter);
goto again;
}
rb_advance_iter(iter);
return event;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
case RINGBUF_TYPE_TIME_EXTEND:
/* Internal data, OK to advance */
rb_advance_iter(iter);
goto again;
case RINGBUF_TYPE_TIME_STAMP:
/* FIXME: not implemented */
rb_advance_iter(iter);
goto again;
case RINGBUF_TYPE_DATA:
if (ts) {
*ts = iter->read_stamp + event->time_delta;
ring-buffer: add api to allow a tracer to change clock source This patch adds a new function called ring_buffer_set_clock that allows a tracer to assign its own clock source to the buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-18 00:22:06 +03:00
ring_buffer_normalize_time_stamp(buffer,
cpu_buffer->cpu, ts);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
return event;
default:
BUG();
}
return NULL;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_iter_peek);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
static inline bool rb_reader_lock(struct ring_buffer_per_cpu *cpu_buffer)
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
{
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
if (likely(!in_nmi())) {
raw_spin_lock(&cpu_buffer->reader_lock);
return true;
}
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
/*
* If an NMI die dumps out the content of the ring buffer
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
* trylock must be used to prevent a deadlock if the NMI
* preempted a task that holds the ring buffer locks. If
* we get the lock then all is fine, if not, then continue
* to do the read, but this can corrupt the ring buffer,
* so it must be permanently disabled from future writes.
* Reading from NMI is a oneshot deal.
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
*/
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
if (raw_spin_trylock(&cpu_buffer->reader_lock))
return true;
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
/* Continue without locking, but disable the ring buffer */
atomic_inc(&cpu_buffer->record_disabled);
return false;
}
static inline void
rb_reader_unlock(struct ring_buffer_per_cpu *cpu_buffer, bool locked)
{
if (likely(locked))
raw_spin_unlock(&cpu_buffer->reader_lock);
return;
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
}
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
/**
* ring_buffer_peek - peek at the next event to be read
* @buffer: The ring buffer to read
* @cpu: The cpu to peak at
* @ts: The timestamp counter of this event.
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
* @lost_events: a variable to store if events were lost (may be NULL)
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
*
* This will return the event that will be read next, but does
* not consume the data.
*/
struct ring_buffer_event *
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts,
unsigned long *lost_events)
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
{
struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu];
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
struct ring_buffer_event *event;
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
unsigned long flags;
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
bool dolock;
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return NULL;
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
again:
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_save(flags);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
dolock = rb_reader_lock(cpu_buffer);
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
event = rb_buffer_peek(cpu_buffer, ts, lost_events);
ring-buffer: Fix advance of reader in rb_buffer_peek() When calling rb_buffer_peek() from ring_buffer_consume() and a padding event is returned, the function rb_advance_reader() is called twice. This may lead to missing samples or under high workloads to the warning below. This patch fixes this. If a padding event is returned by rb_buffer_peek() it will be consumed by the calling function now. Also, I simplified some code in ring_buffer_consume(). ------------[ cut here ]------------ WARNING: at /dev/shm/.source/linux/kernel/trace/ring_buffer.c:2289 rb_advance_reader+0x2e/0xc5() Hardware name: Anaheim Modules linked in: Pid: 29, comm: events/2 Tainted: G W 2.6.31-rc3-oprofile-x86_64-standard-00059-g5050dc2 #1 Call Trace: [<ffffffff8106776f>] ? rb_advance_reader+0x2e/0xc5 [<ffffffff81039ffe>] warn_slowpath_common+0x77/0x8f [<ffffffff8103a025>] warn_slowpath_null+0xf/0x11 [<ffffffff8106776f>] rb_advance_reader+0x2e/0xc5 [<ffffffff81068bda>] ring_buffer_consume+0xa0/0xd2 [<ffffffff81326933>] op_cpu_buffer_read_entry+0x21/0x9e [<ffffffff810be3af>] ? __find_get_block+0x4b/0x165 [<ffffffff8132749b>] sync_buffer+0xa5/0x401 [<ffffffff810be3af>] ? __find_get_block+0x4b/0x165 [<ffffffff81326c1b>] ? wq_sync_buffer+0x0/0x78 [<ffffffff81326c76>] wq_sync_buffer+0x5b/0x78 [<ffffffff8104aa30>] worker_thread+0x113/0x1ac [<ffffffff8104dd95>] ? autoremove_wake_function+0x0/0x38 [<ffffffff8104a91d>] ? worker_thread+0x0/0x1ac [<ffffffff8104dc9a>] kthread+0x88/0x92 [<ffffffff8100bdba>] child_rip+0xa/0x20 [<ffffffff8104dc12>] ? kthread+0x0/0x92 [<ffffffff8100bdb0>] ? child_rip+0x0/0x20 ---[ end trace f561c0a58fcc89bd ]--- Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@kernel.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-30 21:19:18 +04:00
if (event && event->type_len == RINGBUF_TYPE_PADDING)
rb_advance_reader(cpu_buffer);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
rb_reader_unlock(cpu_buffer, dolock);
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_restore(flags);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: remove unnecessary cpu_relax The loops in the ring buffer that use cpu_relax are not dependent on other CPUs. They simply came across some padding in the ring buffer and are skipping over them. It is a normal loop and does not require a cpu_relax. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:12:13 +04:00
if (event && event->type_len == RINGBUF_TYPE_PADDING)
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
goto again;
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
return event;
}
/**
* ring_buffer_iter_peek - peek at the next event to be read
* @iter: The ring buffer iterator
* @ts: The timestamp counter of this event.
*
* This will return the event that will be read next, but does
* not increment the iterator.
*/
struct ring_buffer_event *
ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
{
struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
struct ring_buffer_event *event;
unsigned long flags;
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
again:
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
event = rb_iter_peek(iter, ts);
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: remove unnecessary cpu_relax The loops in the ring buffer that use cpu_relax are not dependent on other CPUs. They simply came across some padding in the ring buffer and are skipping over them. It is a normal loop and does not require a cpu_relax. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:12:13 +04:00
if (event && event->type_len == RINGBUF_TYPE_PADDING)
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
goto again;
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
return event;
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_consume - return an event and consume it
* @buffer: The ring buffer to get the next event from
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
* @cpu: the cpu to read the buffer from
* @ts: a variable to store the timestamp (may be NULL)
* @lost_events: a variable to store if events were lost (may be NULL)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*
* Returns the next event in the ring buffer, and that event is consumed.
* Meaning, that sequential reads will keep returning a different event,
* and eventually empty the ring buffer if the producer is slower.
*/
struct ring_buffer_event *
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts,
unsigned long *lost_events)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
struct ring_buffer_per_cpu *cpu_buffer;
struct ring_buffer_event *event = NULL;
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
unsigned long flags;
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
bool dolock;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
again:
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
/* might be called in atomic */
preempt_disable();
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
cpu_buffer = buffer->buffers[cpu];
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_save(flags);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
dolock = rb_reader_lock(cpu_buffer);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
event = rb_buffer_peek(cpu_buffer, ts, lost_events);
if (event) {
cpu_buffer->lost_events = 0;
ring-buffer: Fix advance of reader in rb_buffer_peek() When calling rb_buffer_peek() from ring_buffer_consume() and a padding event is returned, the function rb_advance_reader() is called twice. This may lead to missing samples or under high workloads to the warning below. This patch fixes this. If a padding event is returned by rb_buffer_peek() it will be consumed by the calling function now. Also, I simplified some code in ring_buffer_consume(). ------------[ cut here ]------------ WARNING: at /dev/shm/.source/linux/kernel/trace/ring_buffer.c:2289 rb_advance_reader+0x2e/0xc5() Hardware name: Anaheim Modules linked in: Pid: 29, comm: events/2 Tainted: G W 2.6.31-rc3-oprofile-x86_64-standard-00059-g5050dc2 #1 Call Trace: [<ffffffff8106776f>] ? rb_advance_reader+0x2e/0xc5 [<ffffffff81039ffe>] warn_slowpath_common+0x77/0x8f [<ffffffff8103a025>] warn_slowpath_null+0xf/0x11 [<ffffffff8106776f>] rb_advance_reader+0x2e/0xc5 [<ffffffff81068bda>] ring_buffer_consume+0xa0/0xd2 [<ffffffff81326933>] op_cpu_buffer_read_entry+0x21/0x9e [<ffffffff810be3af>] ? __find_get_block+0x4b/0x165 [<ffffffff8132749b>] sync_buffer+0xa5/0x401 [<ffffffff810be3af>] ? __find_get_block+0x4b/0x165 [<ffffffff81326c1b>] ? wq_sync_buffer+0x0/0x78 [<ffffffff81326c76>] wq_sync_buffer+0x5b/0x78 [<ffffffff8104aa30>] worker_thread+0x113/0x1ac [<ffffffff8104dd95>] ? autoremove_wake_function+0x0/0x38 [<ffffffff8104a91d>] ? worker_thread+0x0/0x1ac [<ffffffff8104dc9a>] kthread+0x88/0x92 [<ffffffff8100bdba>] child_rip+0xa/0x20 [<ffffffff8104dc12>] ? kthread+0x0/0x92 [<ffffffff8100bdb0>] ? child_rip+0x0/0x20 ---[ end trace f561c0a58fcc89bd ]--- Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@kernel.org> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-30 21:19:18 +04:00
rb_advance_reader(cpu_buffer);
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
}
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
rb_reader_unlock(cpu_buffer, dolock);
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_restore(flags);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
out:
preempt_enable();
ring-buffer: remove unnecessary cpu_relax The loops in the ring buffer that use cpu_relax are not dependent on other CPUs. They simply came across some padding in the ring buffer and are skipping over them. It is a normal loop and does not require a cpu_relax. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:12:13 +04:00
if (event && event->type_len == RINGBUF_TYPE_PADDING)
tracing: add ring_buffer_event_discard() to ring buffer This patch overloads RINGBUF_TYPE_PADDING to provide a way to discard events from the ring buffer, for the event-filtering mechanism introduced in a subsequent patch. I did the initial version but thanks to Steven Rostedt for adding the parts that actually made it work. ;-) Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-22 11:30:49 +03:00
goto again;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return event;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_consume);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
* ring_buffer_read_prepare - Prepare for a non consuming read of the buffer
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* @buffer: The ring buffer to read from
* @cpu: The cpu buffer to iterate over
*
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
* This performs the initial preparations necessary to iterate
* through the buffer. Memory is allocated, buffer recording
* is disabled, and the iterator pointer is returned to the caller.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
* Disabling buffer recordng prevents the reading from being
* corrupted. This is not a consuming read, so a producer is not
* expected.
*
* After a sequence of ring_buffer_read_prepare calls, the user is
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* expected to make at least one call to ring_buffer_read_prepare_sync.
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
* Afterwards, ring_buffer_read_start is invoked to get things going
* for real.
*
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* This overall must be paired with ring_buffer_read_finish.
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
*/
struct ring_buffer_iter *
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
ring_buffer_read_prepare(struct ring_buffer *buffer, int cpu)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
struct ring_buffer_iter *iter;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return NULL;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
iter = kmalloc(sizeof(*iter), GFP_KERNEL);
if (!iter)
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return NULL;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
iter->cpu_buffer = cpu_buffer;
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
atomic_inc(&buffer->resize_disabled);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
atomic_inc(&cpu_buffer->record_disabled);
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
return iter;
}
EXPORT_SYMBOL_GPL(ring_buffer_read_prepare);
/**
* ring_buffer_read_prepare_sync - Synchronize a set of prepare calls
*
* All previously invoked ring_buffer_read_prepare calls to prepare
* iterators will be synchronized. Afterwards, read_buffer_read_start
* calls on those iterators are allowed.
*/
void
ring_buffer_read_prepare_sync(void)
{
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
synchronize_sched();
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
}
EXPORT_SYMBOL_GPL(ring_buffer_read_prepare_sync);
/**
* ring_buffer_read_start - start a non consuming read of the buffer
* @iter: The iterator returned by ring_buffer_read_prepare
*
* This finalizes the startup of an iteration through the buffer.
* The iterator comes from a call to ring_buffer_read_prepare and
* an intervening ring_buffer_read_prepare_sync must have been
* performed.
*
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* Must be paired with ring_buffer_read_finish.
ring-buffer: Make non-consuming read less expensive with lots of cpus. When performing a non-consuming read, a synchronize_sched() is performed once for every cpu which is actively tracing. This is very expensive, and can make it take several seconds to open up the 'trace' file with lots of cpus. Only one synchronize_sched() call is actually necessary. What is desired is for all cpus to see the disabling state change. So we transform the existing sequence: for_each_cpu() { ring_buffer_read_start(); } where each ring_buffer_start() call performs a synchronize_sched(), into the following: for_each_cpu() { ring_buffer_read_prepare(); } ring_buffer_read_prepare_sync(); for_each_cpu() { ring_buffer_read_start(); } wherein only the single ring_buffer_read_prepare_sync() call needs to do the synchronize_sched(). The first phase, via ring_buffer_read_prepare(), allocates the 'iter' memory and increments ->record_disabled. In the second phase, ring_buffer_read_prepare_sync() makes sure this ->record_disabled state is visible fully to all cpus. And in the final third phase, the ring_buffer_read_start() calls reset the 'iter' objects allocated in the first phase since we now know that none of the cpus are adding trace entries any more. This makes openning the 'trace' file nearly instantaneous on a sparc64 Niagara2 box with 128 cpus tracing. Signed-off-by: David S. Miller <davem@davemloft.net> LKML-Reference: <20100420.154711.11246950.davem@davemloft.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-21 02:47:11 +04:00
*/
void
ring_buffer_read_start(struct ring_buffer_iter *iter)
{
struct ring_buffer_per_cpu *cpu_buffer;
unsigned long flags;
if (!iter)
return;
cpu_buffer = iter->cpu_buffer;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
locking: Convert __raw_spin* functions to arch_spin* Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 22:01:25 +03:00
arch_spin_lock(&cpu_buffer->lock);
ring-buffer: fix deadlock from reader_lock in read_start Impact: deadlock fix in ring_buffer_read_start The ring_buffer_iter_reset was called from ring_buffer_read_start where both grabbed the reader_lock. This patch separates out the internals of ring_buffer_iter_reset to its own function so that both APIs may grab the reader_lock. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 08:01:26 +03:00
rb_iter_reset(iter);
locking: Convert __raw_spin* functions to arch_spin* Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 22:01:25 +03:00
arch_spin_unlock(&cpu_buffer->lock);
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_read_start);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* ring_buffer_read_finish - finish reading the iterator of the buffer
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
* @iter: The iterator retrieved by ring_buffer_start
*
* This re-enables the recording to the buffer, and frees the
* iterator.
*/
void
ring_buffer_read_finish(struct ring_buffer_iter *iter)
{
struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
ring-buffer: Fix race between integrity check and readers The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Cc: stable@vger.kernel.org # 3.6 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:31:16 +04:00
unsigned long flags;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Add integrity check at end of iter read There use to be ring buffer integrity checks after updating the size of the ring buffer. But now that the ring buffer can modify the size while the system is running, the integrity checks were removed, as they require the ring buffer to be disabed to perform the check. Move the integrity check to the reading of the ring buffer via the iterator reads (the "trace" file). As reading via an iterator requires disabling the ring buffer, it is a perfect place to have it. If the ring buffer happens to be disabled when updating the size, we still perform the integrity check. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-15 01:02:33 +04:00
/*
* Ring buffer is disabled from recording, here's a good place
ring-buffer: Fix race between integrity check and readers The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Cc: stable@vger.kernel.org # 3.6 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:31:16 +04:00
* to check the integrity of the ring buffer.
* Must prevent readers from trying to read, as the check
* clears the HEAD page and readers require it.
ring-buffer: Add integrity check at end of iter read There use to be ring buffer integrity checks after updating the size of the ring buffer. But now that the ring buffer can modify the size while the system is running, the integrity checks were removed, as they require the ring buffer to be disabed to perform the check. Move the integrity check to the reading of the ring buffer via the iterator reads (the "trace" file). As reading via an iterator requires disabling the ring buffer, it is a perfect place to have it. If the ring buffer happens to be disabled when updating the size, we still perform the integrity check. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-15 01:02:33 +04:00
*/
ring-buffer: Fix race between integrity check and readers The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Cc: stable@vger.kernel.org # 3.6 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:31:16 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
ring-buffer: Add integrity check at end of iter read There use to be ring buffer integrity checks after updating the size of the ring buffer. But now that the ring buffer can modify the size while the system is running, the integrity checks were removed, as they require the ring buffer to be disabed to perform the check. Move the integrity check to the reading of the ring buffer via the iterator reads (the "trace" file). As reading via an iterator requires disabling the ring buffer, it is a perfect place to have it. If the ring buffer happens to be disabled when updating the size, we still perform the integrity check. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-15 01:02:33 +04:00
rb_check_pages(cpu_buffer);
ring-buffer: Fix race between integrity check and readers The function rb_check_pages() was added to make sure the ring buffer's pages were sane. This check is done when the ring buffer size is modified as well as when the iterator is released (closing the "trace" file), as that was considered a non fast path and a good place to do a sanity check. The problem is that the check does not have any locks around it. If one process were to read the trace file, and another were to read the raw binary file, the check could happen while the reader is reading the file. The issues with this is that the check requires to clear the HEAD page before doing the full check and it restores it afterward. But readers require the HEAD page to exist before it can read the buffer, otherwise it gives a nasty warning and disables the buffer. By adding the reader lock around the check, this keeps the race from happening. Cc: stable@vger.kernel.org # 3.6 Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-11-30 07:31:16 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
ring-buffer: Add integrity check at end of iter read There use to be ring buffer integrity checks after updating the size of the ring buffer. But now that the ring buffer can modify the size while the system is running, the integrity checks were removed, as they require the ring buffer to be disabed to perform the check. Move the integrity check to the reading of the ring buffer via the iterator reads (the "trace" file). As reading via an iterator requires disabling the ring buffer, it is a perfect place to have it. If the ring buffer happens to be disabled when updating the size, we still perform the integrity check. Cc: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-15 01:02:33 +04:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
atomic_dec(&cpu_buffer->record_disabled);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
atomic_dec(&cpu_buffer->buffer->resize_disabled);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
kfree(iter);
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_read_finish);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_read - read the next item in the ring buffer by the iterator
* @iter: The ring buffer iterator
* @ts: The time stamp of the event read.
*
* This reads the next event in the ring buffer and increments the iterator.
*/
struct ring_buffer_event *
ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts)
{
struct ring_buffer_event *event;
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
unsigned long flags;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
ring-buffer: fix ring_buffer_read crossing pages When the ring buffer uses an iterator (static read mode, not on the fly reading), when it crosses a page boundery, it will skip the first entry on the next page. The reason is that the last entry of a page is usually padding if the page is not full. The padding will not be returned to the user. The problem arises on ring_buffer_read because it also increments the iterator. Because both the read and peek use the same rb_iter_peek, the rb_iter_peak will return the padding but also increment to the next item. This is because the ring_buffer_peek will not incerment it itself. The ring_buffer_read will increment it again and then call rb_iter_peek again to get the next item. But that will be the second item, not the first one on the page. The reason this never showed up before, is because the ftrace utility always calls ring_buffer_peek first and only uses ring_buffer_read to increment to the next item. The ring_buffer_peek will always keep the pointer to a valid item and not padding. This just hid the bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:02:09 +04:00
again:
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
event = rb_iter_peek(iter, ts);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
if (!event)
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: fix ring_buffer_read crossing pages When the ring buffer uses an iterator (static read mode, not on the fly reading), when it crosses a page boundery, it will skip the first entry on the next page. The reason is that the last entry of a page is usually padding if the page is not full. The padding will not be returned to the user. The problem arises on ring_buffer_read because it also increments the iterator. Because both the read and peek use the same rb_iter_peek, the rb_iter_peak will return the padding but also increment to the next item. This is because the ring_buffer_peek will not incerment it itself. The ring_buffer_read will increment it again and then call rb_iter_peek again to get the next item. But that will be the second item, not the first one on the page. The reason this never showed up before, is because the ftrace utility always calls ring_buffer_peek first and only uses ring_buffer_read to increment to the next item. The ring_buffer_peek will always keep the pointer to a valid item and not padding. This just hid the bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-03 18:02:09 +04:00
if (event->type_len == RINGBUF_TYPE_PADDING)
goto again;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
rb_advance_iter(iter);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
out:
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
return event;
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_read);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_size - return the size of the ring buffer (in bytes)
* @buffer: The ring buffer.
*/
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
unsigned long ring_buffer_size(struct ring_buffer *buffer, int cpu)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
/*
* Earlier, this method returned
* BUF_PAGE_SIZE * buffer->nr_pages
* Since the nr_pages field is now removed, we have converted this to
* return the per cpu buffer value.
*/
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
return BUF_PAGE_SIZE * buffer->buffers[cpu]->nr_pages;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_size);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
static void
rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer)
{
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_deactivate(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer->head_page
ring-buffer: make the buffer a true circular link list This patch changes the ring buffer data pages from using a link list head pointer, to making each buffer page point to another buffer page and never back to a "head". This makes the handling of the ring buffer less complex, since the traversing of the ring buffer pages no longer needs to account for the head pointer. This change also is needed to make the ring buffer lockless. [ Changes in version 2: - Added change that Lai Jiangshan mentioned. From: Lai Jiangshan <laijs@cn.fujitsu.com> Date: Thu, 11 Jun 2009 11:25:48 +0800 LKML-Reference: <4A30793C.6090208@cn.fujitsu.com> I'm not sure whether these 4 lines: bpage = list_entry(pages.next, struct buffer_page, list); list_del_init(&bpage->list); cpu_buffer->pages = &bpage->list; list_splice(&pages, cpu_buffer->pages); equal to these 2 lines: cpu_buffer->pages = pages.next; list_del(&pages); If there are equivalent, I think the second one are simpler. It may be not a really necessarily cleanup. What I asked is: if there are equivalent, could you use these two line: cpu_buffer->pages = pages.next; list_del(&pages); ] [ Impact: simplify the ring buffer to help make it lockless ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-30 23:32:01 +04:00
= list_entry(cpu_buffer->pages, struct buffer_page, list);
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
local_set(&cpu_buffer->head_page->write, 0);
ring-buffer: record page entries in buffer page descriptor Currently, when the ring buffer writer overflows the buffer and must write over non consumed data, we increment the overrun counter by reading the entries on the page we are about to overwrite. This reads the entries one by one. This is not very effecient. This patch adds another entry counter into each buffer page descriptor that keeps track of the number of entries on the page. Now on overwrite, the overrun counter simply needs to add the number of entries that is on the page it is about to overwrite. [ Impact: speed up of ring buffer in overwrite mode ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 02:44:45 +04:00
local_set(&cpu_buffer->head_page->entries, 0);
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
local_set(&cpu_buffer->head_page->page->commit, 0);
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
cpu_buffer->head_page->read = 0;
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
cpu_buffer->tail_page = cpu_buffer->head_page;
cpu_buffer->commit_page = cpu_buffer->head_page;
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
ring-buffer: Make addition of pages in ring buffer atomic This patch adds the capability to add new pages to a ring buffer atomically while write operations are going on. This makes it possible to expand the ring buffer size without reinitializing the ring buffer. The new pages are attached between the head page and its previous page. Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:51 +04:00
INIT_LIST_HEAD(&cpu_buffer->new_pages);
ring-buffer: make reentrant This patch replaces the local_irq_save/restore with preempt_disable/ enable. This allows for interrupts to enter while recording. To write to the ring buffer, you must reserve data, and then commit it. During this time, an interrupt may call a trace function that will also record into the buffer before the commit is made. The interrupt will reserve its entry after the first entry, even though the first entry did not finish yet. The time stamp delta of the interrupt entry will be zero, since in the view of the trace, the interrupt happened during the first field anyway. Locking still takes place when the tail/write moves from one page to the next. The reader always takes the locks. A new page pointer is added, called the commit. The write/tail will always point to the end of all entries. The commit field will point to the last committed entry. Only this commit entry may update the write time stamp. The reader can only go up to the commit. It cannot go past it. If a lot of interrupts come in during a commit that fills up the buffer, and it happens to make it all the way around the buffer back to the commit, then a warning is printed and new events will be dropped. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:59 +04:00
local_set(&cpu_buffer->reader_page->write, 0);
ring-buffer: record page entries in buffer page descriptor Currently, when the ring buffer writer overflows the buffer and must write over non consumed data, we increment the overrun counter by reading the entries on the page we are about to overwrite. This reads the entries one by one. This is not very effecient. This patch adds another entry counter into each buffer page descriptor that keeps track of the number of entries on the page. Now on overwrite, the overrun counter simply needs to add the number of entries that is on the page it is about to overwrite. [ Impact: speed up of ring buffer in overwrite mode ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 02:44:45 +04:00
local_set(&cpu_buffer->reader_page->entries, 0);
ring-buffer: move some metadata into buffer page Impact: get ready for splice changes This patch moves the commit and timestamp into the beginning of each data page of the buffer. This change will allow the page to be moved to another location (disk, network, etc) and still have information in the page to be able to read it. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:06 +03:00
local_set(&cpu_buffer->reader_page->page->commit, 0);
ring-buffer: move page indexes into page headers Remove the global head and tail indexes and move them into the page header. Each page will now keep track of where the last write and read was made. We also rename the head and tail to read and write for better clarification. This patch is needed for future enhancements to move the ring buffer to a lockless solution. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-04 10:00:58 +04:00
cpu_buffer->reader_page->read = 0;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
local_set(&cpu_buffer->entries_bytes, 0);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
local_set(&cpu_buffer->overrun, 0);
ring-buffer: Add a 'dropped events' counter The existing 'overrun' counter is incremented when the ring buffer wraps around, with overflow on (the default). We wanted a way to count requests lost from the buffer filling up with overflow off, too. I decided to add a new counter instead of retro-fitting the existing one because it seems like a different statistic to count conceptually, and also because of how the code was structured. Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com Signed-off-by: Slava Pestov <slavapestov@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-16 01:23:58 +04:00
local_set(&cpu_buffer->commit_overrun, 0);
local_set(&cpu_buffer->dropped_events, 0);
ring-buffer: convert cpu buffer entries to local_t The entries counter in cpu buffer is not atomic. It can be updated by other interrupts or from another CPU (readers). But making entries into "atomic_t" causes an atomic operation that can hurt performance. Instead we convert it to a local_t that will increment a counter with a local CPU atomic operation (if the arch supports it). Instead of fighting with readers and overwrites that decrement the counter, I added a "read" counter. Every time a reader reads an entry it is incremented. We already have a overrun counter and with that, the entries counter and the read counter, we can calculate the total number of entries in the buffer with: (entries - overrun) - read As long as the total number of entries in the ring buffer is less than the word size, this will work. But since the entries counter was previously a long, this is no different than what we had before. Thanks to Andrew Morton for pointing out in the first version that atomic_t does not replace unsigned long. I switched to atomic_long_t even though it is signed. A negative count is most likely a bug. [ Impact: keep accurate count of cpu buffer entries ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-01 04:49:44 +04:00
local_set(&cpu_buffer->entries, 0);
ring-buffer: use commit counters for commit pointer accounting The ring buffer is made up of three sets of pointers. The head page pointer, which points to the next page for the reader to get. The commit pointer and commit index, which points to the page and index of the last committed write respectively. The tail pointer and tail index, which points to the page and the index of the last reserved data respectively (non committed). The commit pointer is only moved forward by the outer most writer. If a nested writer comes in, it will not move the pointer forward. The current implementation has a flaw. It assumes that the outer most writer successfully reserved data. There's a small race window where the outer most writer could find the tail pointer, but a nested writer could come in (via interrupt) and move the tail forward, and even the commit forward. The outer writer would not realized the commit moved forward and the accounting will break. This patch changes the design to use counters in the per cpu buffers to keep track of commits. The counters are incremented at the start of the commit, and decremented at the end. If the end commit counter is 1, then it moves the commit pointers. A loop is made to check for races between checking and moving the commit pointers. Only the outer commit should move the pointers anyway. The test of knowing if a reserve is equal to the last commit update is still needed to know for time keeping. The time code is much less racey than the commit updates. This change not only solves the mentioned race, but also makes the code simpler. [ Impact: fix commit race and simplify code ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-16 20:37:57 +04:00
local_set(&cpu_buffer->committing, 0);
local_set(&cpu_buffer->commits, 0);
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
cpu_buffer->read = 0;
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
cpu_buffer->read_bytes = 0;
ring-buffer: reset timestamps when ring buffer is reset Impact: fix bad times of recent resets The ring buffer needs to reset its timestamps when reseting of the buffer, otherwise the timestamps are stale and might be used to calculate times in the buffer causing funny timestamps to appear. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-22 02:45:57 +03:00
cpu_buffer->write_stamp = 0;
cpu_buffer->read_stamp = 0;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
cpu_buffer->lost_events = 0;
cpu_buffer->last_overrun = 0;
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
rb_head_page_activate(cpu_buffer);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
/**
* ring_buffer_reset_cpu - reset a ring buffer per CPU buffer
* @buffer: The ring buffer to reset a per cpu buffer of
* @cpu: The CPU buffer to be reset
*/
void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu];
unsigned long flags;
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
return;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
atomic_inc(&buffer->resize_disabled);
ring-buffer: disable writers when resetting buffers As a precaution, it is best to disable writing to the ring buffers when reseting them. [ Impact: prevent weird things if write happens during reset ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 04:26:54 +04:00
atomic_inc(&cpu_buffer->record_disabled);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
/* Make sure all commits have finished */
synchronize_sched();
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: do not reset while in a commit The callers of reset must ensure that no commit can be taking place at the time of the reset. If it does then we may corrupt the ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-02 17:59:48 +04:00
if (RB_WARN_ON(cpu_buffer, local_read(&cpu_buffer->committing)))
goto out;
locking: Convert __raw_spin* functions to arch_spin* Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 22:01:25 +03:00
arch_spin_lock(&cpu_buffer->lock);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
rb_reset_cpu(cpu_buffer);
locking: Convert __raw_spin* functions to arch_spin* Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-02 22:01:25 +03:00
arch_spin_unlock(&cpu_buffer->lock);
ring-buffer: add reader lock Impact: serialize reader accesses to individual CPU ring buffers The code in the ring buffer expects only one reader at a time, but currently it puts that requirement on the caller. This is not strong enough, and this patch adds a "reader_lock" that serializes the access to the reader API of the ring buffer. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 20:47:44 +03:00
ring-buffer: do not reset while in a commit The callers of reset must ensure that no commit can be taking place at the time of the reset. If it does then we may corrupt the ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-02 17:59:48 +04:00
out:
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
ring-buffer: disable writers when resetting buffers As a precaution, it is best to disable writing to the ring buffers when reseting them. [ Impact: prevent weird things if write happens during reset ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 04:26:54 +04:00
atomic_dec(&cpu_buffer->record_disabled);
ring-buffer: Make removal of ring buffer pages atomic This patch adds the capability to remove pages from a ring buffer without destroying any existing data in it. This is done by removing the pages after the tail page. This makes sure that first all the empty pages in the ring buffer are removed. If the head page is one in the list of pages to be removed, then the page after the removed ones is made the head page. This removes the oldest data from the ring buffer and keeps the latest data around to be read. To do this in a non-racey manner, tracing is stopped for a very short time while the pages to be removed are identified and unlinked from the ring buffer. The pages are freed after the tracing is restarted to minimize the time needed to stop tracing. The context in which the pages from the per-cpu ring buffer are removed runs on the respective CPU. This minimizes the events not traced to only NMI trace contexts. Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Laurent Chavey <chavey@google.com> Cc: Justin Teravest <teravest@google.com> Cc: David Sharp <dhsharp@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-05-04 05:59:50 +04:00
atomic_dec(&buffer->resize_disabled);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_reset_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_reset - reset a ring buffer
* @buffer: The ring buffer to reset all cpu buffers
*/
void ring_buffer_reset(struct ring_buffer *buffer)
{
int cpu;
for_each_buffer_cpu(buffer, cpu)
ring_buffer: implement new locking The old "lock always" scheme had issues with lockdep, and was not very efficient anyways. This patch does a new design to be partially lockless on writes. Writes will add new entries to the per cpu pages by simply disabling interrupts. When a write needs to go to another page than it will grab the lock. A new "read page" has been added so that the reader can pull out a page from the ring buffer to read without worrying about the writer writing over it. This allows us to not take the lock for all reads. The lock is now only taken when a read needs to go to a new page. This is far from lockless, and interrupts still need to be disabled, but it is a step towards a more lockless solution, and it also solves a lot of the issues that were noticed by the first conversion of ftrace to the ring buffers. Note: the ring_buffer_{un}lock API has been removed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01 08:29:53 +04:00
ring_buffer_reset_cpu(buffer, cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_reset);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* rind_buffer_empty - is the ring buffer empty?
* @buffer: The ring buffer to test
*/
ring_buffer: ring_buffer_empty{cpu}() can return boolean Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:32 +03:00
bool ring_buffer_empty(struct ring_buffer *buffer)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: add locks around rb_per_cpu_empty The checking of whether the buffer is empty or not needs to be serialized among the readers. Add the reader spin lock around it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 08:39:43 +04:00
unsigned long flags;
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
bool dolock;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
int cpu;
ring-buffer: add locks around rb_per_cpu_empty The checking of whether the buffer is empty or not needs to be serialized among the readers. Add the reader spin lock around it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 08:39:43 +04:00
int ret;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/* yes this is racy, but if you don't like the race, lock the buffer */
for_each_buffer_cpu(buffer, cpu) {
cpu_buffer = buffer->buffers[cpu];
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_save(flags);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
dolock = rb_reader_lock(cpu_buffer);
ring-buffer: add locks around rb_per_cpu_empty The checking of whether the buffer is empty or not needs to be serialized among the readers. Add the reader spin lock around it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 08:39:43 +04:00
ret = rb_per_cpu_empty(cpu_buffer);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
rb_reader_unlock(cpu_buffer, dolock);
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_restore(flags);
ring-buffer: add locks around rb_per_cpu_empty The checking of whether the buffer is empty or not needs to be serialized among the readers. Add the reader spin lock around it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 08:39:43 +04:00
if (!ret)
ring_buffer: ring_buffer_empty{cpu}() can return boolean Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:32 +03:00
return false;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
ring_buffer: ring_buffer_empty{cpu}() can return boolean Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:32 +03:00
return true;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_empty);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_empty_cpu - is a cpu buffer of a ring buffer empty?
* @buffer: The ring buffer
* @cpu: The CPU buffer to test
*/
ring_buffer: ring_buffer_empty{cpu}() can return boolean Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:32 +03:00
bool ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu)
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
{
struct ring_buffer_per_cpu *cpu_buffer;
ring-buffer: add locks around rb_per_cpu_empty The checking of whether the buffer is empty or not needs to be serialized among the readers. Add the reader spin lock around it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 08:39:43 +04:00
unsigned long flags;
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
bool dolock;
ring-buffer: remove unneeded get_online_cpus Impact: speed up and remove possible races The get_online_cpus was added to the ring buffer because the original design would free the ring buffer on a CPU that was being taken off line. The final design kept the ring buffer around even when the CPU was taken off line. This is to allow a user to still read the information on that ring buffer. Most of the get_online_cpus are no longer needed since the ring buffer will not disappear from the use cases. Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 20:13:49 +03:00
int ret;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
ring_buffer: ring_buffer_empty{cpu}() can return boolean Make ring_buffer_empty() and ring_buffer_empty_cpu() return bool. No functional change. Link: http://lkml.kernel.org/r/1443537816-5788-5-git-send-email-bywxiaobai@163.com Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-29 17:43:32 +03:00
return true;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
cpu_buffer = buffer->buffers[cpu];
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_save(flags);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
dolock = rb_reader_lock(cpu_buffer);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
ret = rb_per_cpu_empty(cpu_buffer);
ring-buffer: Give NMIs a chance to lock the reader_lock Currently, if an NMI does a dump of a ring buffer, it disables all ring buffers from ever doing any writes again. This is because it wont take the locks for the cpu_buffer and this can cause corruption if it preempted a read, or a read happens on another CPU for the current cpu buffer. This is a bit overkill. First, it should at least try to take the lock, and if it fails then disable it. Also, there's no need to disable all ring buffers, even those that are unrelated to what is being read. Only disable the per cpu ring buffer that is being read if it can not get the lock for it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-28 20:14:51 +03:00
rb_reader_unlock(cpu_buffer, dolock);
ring-buffer: do not grab locks in nmi If ftrace_dump_on_oops is set, and an NMI detects a lockup, then it will need to read from the ring buffer. But the read side of the ring buffer still takes locks. This patch adds a check on the read side that if it is in an NMI, then it will disable the ring buffer and not take any locks. Reads can still happen on a disabled ring buffer. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-17 05:22:48 +04:00
local_irq_restore(flags);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
return ret;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_empty_cpu);
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: only enable ring_buffer_swap_cpu when needed Since the ability to swap the cpu buffers adds a small overhead to the recording of a trace, we only want to add it when needed. Only the irqsoff and preemptoff tracers use this feature, and both are not recommended for production kernels. This patch disables its use when neither irqsoff nor preemptoff is configured. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:24:40 +04:00
#ifdef CONFIG_RING_BUFFER_ALLOW_SWAP
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/**
* ring_buffer_swap_cpu - swap a CPU buffer between two ring buffers
* @buffer_a: One buffer to swap with
* @buffer_b: The other buffer to swap with
*
* This function is useful for tracers that want to take a "snapshot"
* of a CPU buffer and has another back up buffer lying around.
* it is expected that the tracer handles the cpu buffer not being
* used at the moment.
*/
int ring_buffer_swap_cpu(struct ring_buffer *buffer_a,
struct ring_buffer *buffer_b, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer_a;
struct ring_buffer_per_cpu *cpu_buffer_b;
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
int ret = -EINVAL;
cpumask: convert kernel trace functions Impact: Reduce future memory usage, use new cpumask API. (Eventually, cpumask_var_t will be allocated based on nr_cpu_ids, not NR_CPUS). Convert kernel trace functions to use struct cpumask API: 1) Use cpumask_copy/cpumask_test_cpu/for_each_cpu. 2) Use cpumask_var_t and alloc_cpumask_var/free_cpumask_var everywhere. 3) Use on_each_cpu instead of playing with current->cpus_allowed. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Steven Rostedt <rostedt@goodmis.org>
2009-01-01 02:42:22 +03:00
if (!cpumask_test_cpu(cpu, buffer_a->cpumask) ||
!cpumask_test_cpu(cpu, buffer_b->cpumask))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
cpu_buffer_a = buffer_a->buffers[cpu];
cpu_buffer_b = buffer_b->buffers[cpu];
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/* At least make sure the two buffers are somewhat the same */
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ret = -EAGAIN;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: do not swap if recording is disabled If the ring buffer recording has been disabled. Do not let swapping of ring buffers occur. Simply return -EAGAIN. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 23:24:56 +03:00
if (atomic_read(&buffer_a->record_disabled))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: do not swap if recording is disabled If the ring buffer recording has been disabled. Do not let swapping of ring buffers occur. Simply return -EAGAIN. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 23:24:56 +03:00
if (atomic_read(&buffer_b->record_disabled))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: do not swap if recording is disabled If the ring buffer recording has been disabled. Do not let swapping of ring buffers occur. Simply return -EAGAIN. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 23:24:56 +03:00
if (atomic_read(&cpu_buffer_a->record_disabled))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: do not swap if recording is disabled If the ring buffer recording has been disabled. Do not let swapping of ring buffers occur. Simply return -EAGAIN. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 23:24:56 +03:00
if (atomic_read(&cpu_buffer_b->record_disabled))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: do not swap if recording is disabled If the ring buffer recording has been disabled. Do not let swapping of ring buffers occur. Simply return -EAGAIN. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-21 23:24:56 +03:00
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
/*
* We can't do a synchronize_sched here because this
* function can be called in atomic context.
* Normally this will be called from the same CPU as cpu.
* If not it's up to the caller to protect this.
*/
atomic_inc(&cpu_buffer_a->record_disabled);
atomic_inc(&cpu_buffer_b->record_disabled);
ring-buffer: do not swap buffers during a commit If a commit is taking place on a CPU ring buffer, do not allow it to be swapped. Return -EBUSY when this is detected instead. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-02 18:56:15 +04:00
ret = -EBUSY;
if (local_read(&cpu_buffer_a->committing))
goto out_dec;
if (local_read(&cpu_buffer_b->committing))
goto out_dec;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
buffer_a->buffers[cpu] = cpu_buffer_b;
buffer_b->buffers[cpu] = cpu_buffer_a;
cpu_buffer_b->buffer = buffer_a;
cpu_buffer_a->buffer = buffer_b;
ring-buffer: do not swap buffers during a commit If a commit is taking place on a CPU ring buffer, do not allow it to be swapped. Return -EBUSY when this is detected instead. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-02 18:56:15 +04:00
ret = 0;
out_dec:
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
atomic_dec(&cpu_buffer_a->record_disabled);
atomic_dec(&cpu_buffer_b->record_disabled);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
out:
return ret;
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
}
ring_buffer: adding EXPORT_SYMBOLs I added EXPORT_SYMBOL_GPLs for all functions part of the API (ring_buffer.h). This is required since oprofile is using the ring buffer and the compilation as modules would fail otherwise. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-11 18:49:22 +03:00
EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu);
ring-buffer: only enable ring_buffer_swap_cpu when needed Since the ability to swap the cpu buffers adds a small overhead to the recording of a trace, we only want to add it when needed. Only the irqsoff and preemptoff tracers use this feature, and both are not recommended for production kernels. This patch disables its use when neither irqsoff nor preemptoff is configured. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-09-04 22:24:40 +04:00
#endif /* CONFIG_RING_BUFFER_ALLOW_SWAP */
tracing: unified trace buffer This is a unified tracing buffer that implements a ring buffer that hopefully everyone will eventually be able to use. The events recorded into the buffer have the following structure: struct ring_buffer_event { u32 type:2, len:3, time_delta:27; u32 array[]; }; The minimum size of an event is 8 bytes. All events are 4 byte aligned inside the buffer. There are 4 types (all internal use for the ring buffer, only the data type is exported to the interface users). RINGBUF_TYPE_PADDING: this type is used to note extra space at the end of a buffer page. RINGBUF_TYPE_TIME_EXTENT: This type is used when the time between events is greater than the 27 bit delta can hold. We add another 32 bits, and record that in its own event (8 byte size). RINGBUF_TYPE_TIME_STAMP: (Not implemented yet). This will hold data to help keep the buffer timestamps in sync. RINGBUF_TYPE_DATA: The event actually holds user data. The "len" field is only three bits. Since the data must be 4 byte aligned, this field is shifted left by 2, giving a max length of 28 bytes. If the data load is greater than 28 bytes, the first array field holds the full length of the data load and the len field is set to zero. Example, data size of 7 bytes: type = RINGBUF_TYPE_DATA len = 2 time_delta: <time-stamp> - <prev_event-time-stamp> array[0..1]: <7 bytes of data> <1 byte empty> This event is saved in 12 bytes of the buffer. An event with 82 bytes of data: type = RINGBUF_TYPE_DATA len = 0 time_delta: <time-stamp> - <prev_event-time-stamp> array[0]: 84 (Note the alignment) array[1..14]: <82 bytes of data> <2 bytes empty> The above event is saved in 92 bytes (if my math is correct). 82 bytes of data, 2 bytes empty, 4 byte header, 4 byte length. Do not reference the above event struct directly. Use the following functions to gain access to the event table, since the ring_buffer_event structure may change in the future. ring_buffer_event_length(event): get the length of the event. This is the size of the memory used to record this event, and not the size of the data pay load. ring_buffer_time_delta(event): get the time delta of the event This returns the delta time stamp since the last event. Note: Even though this is in the header, there should be no reason to access this directly, accept for debugging. ring_buffer_event_data(event): get the data from the event This is the function to use to get the actual data from the event. Note, it is only a pointer to the data inside the buffer. This data must be copied to another location otherwise you risk it being written over in the buffer. ring_buffer_lock: A way to lock the entire buffer. ring_buffer_unlock: unlock the buffer. ring_buffer_alloc: create a new ring buffer. Can choose between overwrite or consumer/producer mode. Overwrite will overwrite old data, where as consumer producer will throw away new data if the consumer catches up with the producer. The consumer/producer is the default. ring_buffer_free: free the ring buffer. ring_buffer_resize: resize the buffer. Changes the size of each cpu buffer. Note, it is up to the caller to provide that the buffer is not being used while this is happening. This requirement may go away but do not count on it. ring_buffer_lock_reserve: locks the ring buffer and allocates an entry on the buffer to write to. ring_buffer_unlock_commit: unlocks the ring buffer and commits it to the buffer. ring_buffer_write: writes some data into the ring buffer. ring_buffer_peek: Look at a next item in the cpu buffer. ring_buffer_consume: get the next item in the cpu buffer and consume it. That is, this function increments the head pointer. ring_buffer_read_start: Start an iterator of a cpu buffer. For now, this disables the cpu buffer, until you issue a finish. This is just because we do not want the iterator to be overwritten. This restriction may change in the future. But note, this is used for static reading of a buffer which is usually done "after" a trace. Live readings would want to use the ring_buffer_consume above, which will not disable the ring buffer. ring_buffer_read_finish: Finishes the read iterator and reenables the ring buffer. ring_buffer_iter_peek: Look at the next item in the cpu iterator. ring_buffer_read: Read the iterator and increment it. ring_buffer_iter_reset: Reset the iterator to point to the beginning of the cpu buffer. ring_buffer_iter_empty: Returns true if the iterator is at the end of the cpu buffer. ring_buffer_size: returns the size in bytes of each cpu buffer. Note, the real size is this times the number of CPUs. ring_buffer_reset_cpu: Sets the cpu buffer to empty ring_buffer_reset: sets all cpu buffers to empty ring_buffer_swap_cpu: swaps a cpu buffer from one buffer with a cpu buffer of another buffer. This is handy when you want to take a snap shot of a running trace on just one cpu. Having a backup buffer, to swap with facilitates this. Ftrace max latencies use this. ring_buffer_empty: Returns true if the ring buffer is empty. ring_buffer_empty_cpu: Returns true if the cpu buffer is empty. ring_buffer_record_disable: disable all cpu buffers (read only) ring_buffer_record_disable_cpu: disable a single cpu buffer (read only) ring_buffer_record_enable: enable all cpu buffers. ring_buffer_record_enabl_cpu: enable a single cpu buffer. ring_buffer_entries: The number of entries in a ring buffer. ring_buffer_overruns: The number of entries removed due to writing wrap. ring_buffer_time_stamp: Get the time stamp used by the ring buffer ring_buffer_normalize_time_stamp: normalize the ring buffer time stamp into nanosecs. I still need to implement the GTOD feature. But we need support from the cpu frequency infrastructure. But this can be done at a later time without affecting the ring buffer interface. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 07:02:38 +04:00
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
/**
* ring_buffer_alloc_read_page - allocate a page to read from buffer
* @buffer: the buffer to allocate for.
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* @cpu: the cpu buffer to allocate.
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
*
* This function is used in conjunction with ring_buffer_read_page.
* When reading a full page from the ring buffer, these functions
* can be used to speed up the process. The calling function should
* allocate a few pages first with this function. Then when it
* needs to get pages from the ring buffer, it passes the result
* of this function into ring_buffer_read_page, which will swap
* the page that was allocated, with the read page of the buffer.
*
* Returns:
* The page allocated, or NULL on error.
*/
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
void *ring_buffer_alloc_read_page(struct ring_buffer *buffer, int cpu)
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
{
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
struct buffer_data_page *bpage;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
struct page *page;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: Set __GFP_NORETRY flag for ring buffer allocating process The tracing ring buffer is allocated from kernel memory. While allocating a large chunk of memory, OOM might happen which destabilizes the system. Thus random processes might get killed during the allocation. This patch adds __GFP_NORETRY flag to the ring buffer allocation calls to make it fail more gracefully if the system will not be able to complete the allocation request. Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1307491302-9236-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-06-08 04:01:42 +04:00
page = alloc_pages_node(cpu_to_node(cpu),
GFP_KERNEL | __GFP_NORETRY, 0);
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
if (!page)
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
return NULL;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 04:56:42 +04:00
bpage = page_address(page);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
rb_init_page(bpage);
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
return bpage;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
}
ring-buffer: export symbols I'm adding a module to do a series of tests on the ring buffer as well as benchmarks. This module needs to have more of the ring buffer API exported. There's nothing wrong with reading the ring buffer from a module. [ Impact: allow modules to read pages from the ring buffer ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-05 09:15:24 +04:00
EXPORT_SYMBOL_GPL(ring_buffer_alloc_read_page);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
/**
* ring_buffer_free_read_page - free an allocated read page
* @buffer: the buffer the page was allocate for
* @data: the page to free
*
* Free a page allocated from ring_buffer_alloc_read_page.
*/
void ring_buffer_free_read_page(struct ring_buffer *buffer, void *data)
{
free_page((unsigned long)data);
}
ring-buffer: export symbols I'm adding a module to do a series of tests on the ring buffer as well as benchmarks. This module needs to have more of the ring buffer API exported. There's nothing wrong with reading the ring buffer from a module. [ Impact: allow modules to read pages from the ring buffer ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-05 09:15:24 +04:00
EXPORT_SYMBOL_GPL(ring_buffer_free_read_page);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
/**
* ring_buffer_read_page - extract a page from the ring buffer
* @buffer: buffer to extract from
* @data_page: the page to use allocated from ring_buffer_alloc_read_page
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
* @len: amount to extract
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
* @cpu: the cpu of the buffer to extract
* @full: should the extraction only happen when the page is full.
*
* This function will pull out a page from the ring buffer and consume it.
* @data_page must be the address of the variable that was returned
* from ring_buffer_alloc_read_page. This is because the page might be used
* to swap with a page in the ring buffer.
*
* for example:
tracing: Typo fix on ring buffer comments There have some mismatch between comments with real function name, update it. This patch also add some missed function arguments description. Link: http://lkml.kernel.org/r/51E3B3B2.4080307@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-15 12:32:50 +04:00
* rpage = ring_buffer_alloc_read_page(buffer, cpu);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
* if (!rpage)
* return error;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
* ret = ring_buffer_read_page(buffer, &rpage, len, cpu, 0);
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
* if (ret >= 0)
* process_page(rpage, ret);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
*
* When @full is set, the function will not return true unless
* the writer is off the reader page.
*
* Note: it is up to the calling functions to handle sleeps and wakeups.
* The ring buffer can be used anywhere in the kernel and can not
* blindly call wake_up. The layer that uses the ring buffer must be
* responsible for that.
*
* Returns:
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
* >=0 if data has been transferred, returns the offset of consumed data.
* <0 if no data has been transferred.
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
*/
int ring_buffer_read_page(struct ring_buffer *buffer,
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
void **data_page, size_t len, int cpu, int full)
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
{
struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu];
struct ring_buffer_event *event;
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
struct buffer_data_page *bpage;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
struct buffer_page *reader;
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
unsigned long missed_events;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
unsigned long flags;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
unsigned int commit;
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
unsigned int read;
ring-buffer: fix timestamp in partial ring_buffer_page_read If a partial ring_buffer_page_read happens, then some of the incremental timestamps may be lost. This patch writes the recent timestamp into the page that is passed back to the caller. A partial ring_buffer_page_read is where the full page would not be written back to the user, and instead, just part of the page is copied to the user. A full page would be a page swap with the ring buffer and the timestamps would be correct. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 07:52:42 +03:00
u64 save_timestamp;
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
int ret = -1;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
if (!cpumask_test_cpu(cpu, buffer->cpumask))
goto out;
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
/*
* If len is not big enough to hold the page header, then
* we can not copy anything.
*/
if (len <= BUF_PAGE_HDR_SIZE)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
len -= BUF_PAGE_HDR_SIZE;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
if (!data_page)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
bpage = *data_page;
if (!bpage)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
reader = rb_get_reader_page(cpu_buffer);
if (!reader)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out_unlock;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
event = rb_reader_event(cpu_buffer);
read = reader->read;
commit = rb_page_commit(reader);
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
/* Check if any events were dropped */
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
missed_events = cpu_buffer->lost_events;
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
/*
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
* If this page has been partially read or
* if len is not big enough to read the rest of the page or
* a writer is still on the page, then
* we must copy the data from the page to the buffer.
* Otherwise, we can simply swap the page with the one passed in.
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
*/
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
if (read || (len < (commit - read)) ||
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
cpu_buffer->reader_page == cpu_buffer->commit_page) {
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
struct buffer_data_page *rpage = cpu_buffer->reader_page->page;
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
unsigned int rpos = read;
unsigned int pos = 0;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
unsigned int size;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
if (full)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out_unlock;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
if (len > (commit - read))
len = (commit - read);
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
/* Always keep the time extend and data together */
size = rb_event_ts_length(event);
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
if (len < size)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
goto out_unlock;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
ring-buffer: fix timestamp in partial ring_buffer_page_read If a partial ring_buffer_page_read happens, then some of the incremental timestamps may be lost. This patch writes the recent timestamp into the page that is passed back to the caller. A partial ring_buffer_page_read is where the full page would not be written back to the user, and instead, just part of the page is copied to the user. A full page would be a page swap with the ring buffer and the timestamps would be correct. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 07:52:42 +03:00
/* save the current timestamp, since the user will need it */
save_timestamp = cpu_buffer->read_stamp;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
/* Need to copy one event at a time */
do {
ring_buffer: Off-by-one and duplicate events in ring_buffer_read_page Fix two related problems in the event-copying loop of ring_buffer_read_page. The loop condition for copying events is off-by-one. "len" is the remaining space in the caller-supplied page. "size" is the size of the next event (or two events). If len == size, then there is just enough space for the next event. size was set to rb_event_ts_length, which may include the size of two events if the first event is a time-extend, in order to assure time- extends are kept together with the event after it. However, rb_advance_reader always advances by one event. This would result in the event after any time-extend being duplicated. Instead, get the size of a single event for the memcpy, but use rb_event_ts_length for the loop condition. Signed-off-by: David Sharp <dhsharp@google.com> LKML-Reference: <1293064704-8101-1-git-send-email-dhsharp@google.com> LKML-Reference: <AANLkTin7nLrRPc9qGjdjHbeVDDWiJjAiYyb-L=gH85bx@mail.gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-12-23 03:38:24 +03:00
/* We need the size of one event, because
* rb_advance_reader only advances by one event,
* whereas rb_event_ts_length may include the size of
* one or two events.
* We have already ensured there's enough space if this
* is a time extend. */
size = rb_event_length(event);
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
memcpy(bpage->data + pos, rpage->data + rpos, size);
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
len -= size;
rb_advance_reader(cpu_buffer);
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
rpos = reader->read;
pos += size;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
tracing: Fix ring_buffer_read_page reading out of page boundary With the configuration: CONFIG_DEBUG_PAGEALLOC=y and Shaohua's patch: [PATCH]x86: make spurious_fault check correct pte bit Function call graph trace with the following will trigger a page fault. # cd /sys/kernel/debug/tracing/ # echo function_graph > current_tracer # cat per_cpu/cpu1/trace_pipe_raw > /dev/null BUG: unable to handle kernel paging request at ffff880006e99000 IP: [<ffffffff81085572>] rb_event_length+0x1/0x3f PGD 1b19063 PUD 1b1d063 PMD 3f067 PTE 6e99160 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/virtual/net/lo/operstate CPU 1 Modules linked in: Pid: 1982, comm: cat Not tainted 2.6.35-rc6-aes+ #300 /Bochs RIP: 0010:[<ffffffff81085572>] [<ffffffff81085572>] rb_event_length+0x1/0x3f RSP: 0018:ffff880006475e38 EFLAGS: 00010006 RAX: 0000000000000ff0 RBX: ffff88000786c630 RCX: 000000000000001d RDX: ffff880006e98000 RSI: 0000000000000ff0 RDI: ffff880006e99000 RBP: ffff880006475eb8 R08: 000000145d7008bd R09: 0000000000000000 R10: 0000000000008000 R11: ffffffff815d9336 R12: ffff880006d08000 R13: ffff880006e605d8 R14: 0000000000000000 R15: 0000000000000018 FS: 00007f2b83e456f0(0000) GS:ffff880002100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff880006e99000 CR3: 00000000064a8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process cat (pid: 1982, threadinfo ffff880006474000, task ffff880006e40770) Stack: ffff880006475eb8 ffffffff8108730f 0000000000000ff0 000000145d7008bd <0> ffff880006e98010 ffff880006d08010 0000000000000296 ffff88000786c640 <0> ffffffff81002956 0000000000000000 ffff8800071f4680 ffff8800071f4680 Call Trace: [<ffffffff8108730f>] ? ring_buffer_read_page+0x15a/0x24a [<ffffffff81002956>] ? return_to_handler+0x15/0x2f [<ffffffff8108a575>] tracing_buffers_read+0xb9/0x164 [<ffffffff810debfe>] vfs_read+0xaf/0x150 [<ffffffff81002941>] return_to_handler+0x0/0x2f [<ffffffff810248b0>] __bad_area_nosemaphore+0x17e/0x1a1 [<ffffffff81002941>] return_to_handler+0x0/0x2f [<ffffffff810248e6>] bad_area_nosemaphore+0x13/0x15 Code: 80 25 b2 16 b3 00 fe c9 c3 55 48 89 e5 f0 80 0d a4 16 b3 00 02 c9 c3 55 31 c0 48 89 e5 48 83 3d 94 16 b3 00 01 c9 0f 94 c0 c3 55 <8a> 0f 48 89 e5 83 e1 1f b8 08 00 00 00 0f b6 d1 83 fa 1e 74 27 RIP [<ffffffff81085572>] rb_event_length+0x1/0x3f RSP <ffff880006475e38> CR2: ffff880006e99000 ---[ end trace a6877bb92ccb36bb ]--- The root cause is that ring_buffer_read_page() may read out of page boundary, because the boundary checking is done after reading. This is fixed via doing boundary checking before reading. Reported-by: Shaohua Li <shaohua.li@intel.com> Cc: <stable@kernel.org> Signed-off-by: Huang Ying <ying.huang@intel.com> LKML-Reference: <1280297641.2771.307.camel@yhuang-dev> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-07-28 10:14:01 +04:00
if (rpos >= commit)
break;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
event = rb_reader_event(cpu_buffer);
ring-buffer: Bind time extend and data events together When the time between two timestamps is greater than 2^27 nanosecs (~134 ms) a time extend event is added that extends the time difference to 59 bits (~18 years). This is due to events only having a 27 bit field to store time. Currently this time extend is a separate event. We add it just before the event data that is being written to the buffer. But before the event data is committed, the event data can also be discarded (as with the case of filters). But because the time extend has already been committed, it will stay in the buffer. If lots of events are being filtered and no event is being written, then every 134ms a time extend can be added to the buffer without any data attached. To keep from filling the entire buffer with time extends, a time extend will never be the first event in a page because the page timestamp can be used. Time extends can only fill the rest of a page with some data at the beginning. This patch binds the time extend with the data. The difference here is that the time extend is not committed before the data is added. Instead, when a time extend is needed, the space reserved on the ring buffer is the time extend + the data event size. The time extend is added to the first part of the reserved block and the data is added to the second. The time extend event is passed back to the reserver, but since the reserver also uses a function to find the data portion of the reserved block, no changes to the ring buffer interface need to be made. When a commit is discarded, we now remove both the time extend and the event. With this approach no more than one time extend can be in the buffer in a row. Data must always follow a time extend. Thanks to Mathieu Desnoyers for suggesting this idea. Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-10-08 02:18:05 +04:00
/* Always keep the time extend and data together */
size = rb_event_ts_length(event);
ring_buffer: Off-by-one and duplicate events in ring_buffer_read_page Fix two related problems in the event-copying loop of ring_buffer_read_page. The loop condition for copying events is off-by-one. "len" is the remaining space in the caller-supplied page. "size" is the size of the next event (or two events). If len == size, then there is just enough space for the next event. size was set to rb_event_ts_length, which may include the size of two events if the first event is a time-extend, in order to assure time- extends are kept together with the event after it. However, rb_advance_reader always advances by one event. This would result in the event after any time-extend being duplicated. Instead, get the size of a single event for the memcpy, but use rb_event_ts_length for the loop condition. Signed-off-by: David Sharp <dhsharp@google.com> LKML-Reference: <1293064704-8101-1-git-send-email-dhsharp@google.com> LKML-Reference: <AANLkTin7nLrRPc9qGjdjHbeVDDWiJjAiYyb-L=gH85bx@mail.gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-12-23 03:38:24 +03:00
} while (len >= size);
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
/* update bpage */
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
local_set(&bpage->commit, pos);
ring-buffer: fix timestamp in partial ring_buffer_page_read If a partial ring_buffer_page_read happens, then some of the incremental timestamps may be lost. This patch writes the recent timestamp into the page that is passed back to the caller. A partial ring_buffer_page_read is where the full page would not be written back to the user, and instead, just part of the page is copied to the user. A full page would be a page swap with the ring buffer and the timestamps would be correct. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 07:52:42 +03:00
bpage->time_stamp = save_timestamp;
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
ring-buffer: make ring_buffer_read_page read from start on partial page Impact: dont leave holes in read buffer page The ring_buffer_read_page swaps a given page with the reader page of the ring buffer, if certain conditions are set: 1) requested length is big enough to hold entire page data 2) a writer is not currently on the page 3) the page is not partially consumed. Instead of swapping with the supplied page. It copies the data to the supplied page instead. But currently the data is copied in the same offset as the source page. This causes a hole at the start of the reader page. This complicates the use of this function. Instead, it should copy the data at the beginning of the function and update the index fields accordingly. Other small clean ups are also done in this patch. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-04 03:51:40 +03:00
/* we copied everything to the beginning */
read = 0;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
} else {
ring-buffer: have read page swap increment counter with page entries In the swap page ring buffer code that is used by the ftrace splice code, we scan the page to increment the counter of entries read. With the number of entries already in the page we simply need to add it. [ Impact: speed up reading page from ring buffer ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 03:40:05 +04:00
/* update the entry counter */
ring-buffer: make lockless This patch converts the ring buffers into a completely lockless buffer recording system. The read side still takes locks since we still serialize readers. But the writers are the ones that must be lockless (those can happen in NMIs). The main change is to the "head_page" pointer. We write to the tail, and read from the head. The "head_page" pointer in the cpu buffer is now just a reference to where to look. The real head page is now kept in the head_page->list->prev->next pointer. That is, in the list head of the previous page we set flags. The list pages are allocated to be aligned such that the lowest significant bits are always zero pointing to the list. This gives us play to put in flags to their pointers. bit 0: set when the page is a head page bit 1: set when the writer is moving the page (for overwrite mode) cmpxchg is used to update the pointer. When the writer wraps the buffer and the tail meets the head, in overwrite mode, the writer must move the head page forward. It first uses cmpxchg to change the pointer flag from 1 to 2. Once this is done, the reader on another CPU will not take the page from the buffer. The writers need to protect against interrupts (we don't bother with disabling interrupts because NMIs are allowed to write too). After the writer sets the pointer flag to 2, it takes care to manage interrupts coming in. This is discribed in detail within the comments of the code. Changes in version 2: - Let reader reset entries value of header page. - Fix tail page passing commit page on reader page test. - Always increment entries and write counter in rb_tail_page_update - Add safety check in rb_set_commit_to_write to break out of infinite loop - add mask in rb_is_reader_page [ Impact: lock free writing to the ring buffer ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-27 18:00:29 +03:00
cpu_buffer->read += rb_page_entries(reader);
trace: Add ring buffer stats to measure rate of events The stats file under per_cpu folder provides the number of entries, overruns and other statistics about the CPU ring buffer. However, the numbers do not provide any indication of how full the ring buffer is in bytes compared to the overall size in bytes. Also, it is helpful to know the rate at which the cpu buffer is filling up. This patch adds an entry "bytes: " in printed stats for per_cpu ring buffer which provides the actual bytes consumed in the ring buffer. This field includes the number of bytes used by recorded events and the padding bytes added when moving the tail pointer to next page. It also adds the following time stamps: "oldest event ts:" - the oldest timestamp in the ring buffer "now ts:" - the timestamp at the time of reading The field "now ts" provides a consistent time snapshot to the userspace when being read. This is read from the same trace clock used by tracing event timestamps. Together, these values provide the rate at which the buffer is filling up, from the formula: bytes / (now_ts - oldest_event_ts) Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1313531179-9323-3-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-08-17 01:46:16 +04:00
cpu_buffer->read_bytes += BUF_PAGE_SIZE;
ring-buffer: have read page swap increment counter with page entries In the swap page ring buffer code that is used by the ftrace splice code, we scan the page to increment the counter of entries read. With the number of entries already in the page we simply need to add it. [ Impact: speed up reading page from ring buffer ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 03:40:05 +04:00
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
/* swap the pages */
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
rb_init_page(bpage);
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
bpage = reader->page;
reader->page = *data_page;
local_set(&reader->write, 0);
ring-buffer: record page entries in buffer page descriptor Currently, when the ring buffer writer overflows the buffer and must write over non consumed data, we increment the overrun counter by reading the entries on the page we are about to overwrite. This reads the entries one by one. This is not very effecient. This patch adds another entry counter into each buffer page descriptor that keeps track of the number of entries on the page. Now on overwrite, the overrun counter simply needs to add the number of entries that is on the page it is about to overwrite. [ Impact: speed up of ring buffer in overwrite mode ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-02 02:44:45 +04:00
local_set(&reader->entries, 0);
ring-buffer: fix ring_buffer_read_page The ring_buffer_read_page was broken if it were to only copy part of the page. This patch fixes that up as well as adds a parameter to allow a length field, in order to only copy part of the buffer page. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-03 08:27:49 +03:00
reader->read = 0;
ring-buffer: change "page" variable names to "bpage" Impact: clean up Andrew Morton pointed out that the kernel convention of a variable named page should be of type page struct. The ring buffer uses a variable named "page" for a pointer to something else. This patch converts those to be called "bpage" (as in "buffer page"). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-03 07:50:03 +03:00
*data_page = bpage;
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
/*
* Use the real_end for the data size,
* This gives us a chance to store the lost events
* on the page.
*/
if (reader->real_end)
local_set(&bpage->commit, reader->real_end);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
}
ring_buffer: fix ring_buffer_read_page() Impact: change API and init bpage when copy ring_buffer_read_page()/rb_remove_entries() may be called for a partially consumed page. Add a parameter for rb_remove_entries() and make it update cpu_buffer->entries correctly for partially consumed pages. ring_buffer_read_page() now returns the offset to the next event. Init the bpage's time_stamp when return value is 0. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-09 09:21:17 +03:00
ret = read;
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
cpu_buffer->lost_events = 0;
ring-buffer: Move zeroing out excess in page to ring buffer code Currently the trace splice code zeros out the excess bytes in the page before sending it off to userspace. This is to make sure userspace is not getting anything it should not be when reading the pages, because the excess data was never initialized to zero before writing (for perfomance reasons). But the splice code has no business in doing this work, it should be done by the ring buffer. With the latest changes for recording lost events, the splice code gets it wrong anyway. Move the zeroing out of excess bytes into the ring buffer code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 21:32:26 +04:00
commit = local_read(&bpage->commit);
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
/*
* Set a flag in the commit field if we lost events
*/
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
if (missed_events) {
/* If there is room at the end of the page to save the
* missed events, then record it there.
*/
if (BUF_PAGE_SIZE - commit >= sizeof(missed_events)) {
memcpy(&bpage->data[commit], &missed_events,
sizeof(missed_events));
local_add(RB_MISSED_STORED, &bpage->commit);
ring-buffer: Move zeroing out excess in page to ring buffer code Currently the trace splice code zeros out the excess bytes in the page before sending it off to userspace. This is to make sure userspace is not getting anything it should not be when reading the pages, because the excess data was never initialized to zero before writing (for perfomance reasons). But the splice code has no business in doing this work, it should be done by the ring buffer. With the latest changes for recording lost events, the splice code gets it wrong anyway. Move the zeroing out of excess bytes into the ring buffer code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 21:32:26 +04:00
commit += sizeof(missed_events);
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
}
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
local_add(RB_MISSED_EVENTS, &bpage->commit);
ring-buffer: Add lost event count to end of sub buffer Currently, binary readers of the ring buffer only know where events were lost, but not how many events were lost at that location. This information is available, but it would require adding another field to the sub buffer header to include it. But when a event can not fit at the end of a sub buffer, it is written to the next sub buffer. This means there is a good chance that the buffer may have room to hold this counter. If it does, write the counter at the end of the sub buffer and set another flag in the data size field that states that this information exists. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 06:11:42 +04:00
}
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-03-31 21:21:56 +04:00
ring-buffer: Move zeroing out excess in page to ring buffer code Currently the trace splice code zeros out the excess bytes in the page before sending it off to userspace. This is to make sure userspace is not getting anything it should not be when reading the pages, because the excess data was never initialized to zero before writing (for perfomance reasons). But the splice code has no business in doing this work, it should be done by the ring buffer. With the latest changes for recording lost events, the splice code gets it wrong anyway. Move the zeroing out of excess bytes into the ring buffer code. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-05-21 21:32:26 +04:00
/*
* This page may be off to user land. Zero it out here.
*/
if (commit < BUF_PAGE_SIZE)
memset(&bpage->data[commit], 0, BUF_PAGE_SIZE - commit);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
out_unlock:
locking, tracing: Annotate tracing locks as raw The tracing locks can be taken in atomic context and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-25 19:13:33 +04:00
raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
out:
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
return ret;
}
ring-buffer: export symbols I'm adding a module to do a series of tests on the ring buffer as well as benchmarks. This module needs to have more of the ring buffer API exported. There's nothing wrong with reading the ring buffer from a module. [ Impact: allow modules to read pages from the ring buffer ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-05 09:15:24 +04:00
EXPORT_SYMBOL_GPL(ring_buffer_read_page);
ring-buffer: read page interface Impact: new API to ring buffer This patch adds a new interface into the ring buffer that allows a page to be read from the ring buffer on a given CPU. For every page read, one must also be given to allow for a "swap" of the pages. rpage = ring_buffer_alloc_read_page(buffer); if (!rpage) goto err; ret = ring_buffer_read_page(buffer, &rpage, cpu, full); if (!ret) goto empty; process_page(rpage); ring_buffer_free_read_page(rpage); The caller of these functions must handle any waits that are needed to wait for new data. The ring_buffer_read_page will simply return 0 if there is no data, or if "full" is set and the writer is still on the current page. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-02 23:34:07 +03:00
ring-buffer: use CONFIG_HOTPLUG_CPU not CONFIG_HOTPLUG The hotplug code in the ring buffers is for use with CPU hotplug, not generic hotplug. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 18:46:03 +03:00
#ifdef CONFIG_HOTPLUG_CPU
tracing/ring-buffer: don't annotate rb_cpu_notify with __cpuinit Impact: remove a section warning CONFIG_DEBUG_SECTION_MISMATCH raises the following warning on -tip: WARNING: kernel/trace/built-in.o(.text+0x5bc5): Section mismatch in reference from the function ring_buffer_alloc() to the function .cpuinit.text:rb_cpu_notify() The function ring_buffer_alloc() references the function __cpuinit rb_cpu_notify(). This is actually harmless. The code in the ring buffer don't build rb_cpu_notify and other cpu hotplug stuffs when !CONFIG_HOTPLUG_CPU so we have no risk to reference freed memory here (it would even be harmless if we unconditionally build it because register_cpu_notifier would do nothing when !CONFIG_HOTPLUG_CPU. But since ring_buffer_alloc() can be called everytime, we don't want it to be annotated with __cpuinit so we drop the __cpuinit from rb_cpu_notify. This is not a waste of memory because it is only defined and used on CONFIG_HOTPLUG_CPU. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1237606416-22268-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-21 06:33:36 +03:00
static int rb_cpu_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
{
struct ring_buffer *buffer =
container_of(self, struct ring_buffer, cpu_notify);
long cpu = (long)hcpu;
ring-buffer: Use long for nr_pages to avoid overflow failures The size variable to change the ring buffer in ftrace is a long. The nr_pages used to update the ring buffer based on the size is int. On 64 bit machines this can cause an overflow problem. For example, the following will cause the ring buffer to crash: # cd /sys/kernel/debug/tracing # echo 10 > buffer_size_kb # echo 8556384240 > buffer_size_kb Then you get the warning of: WARNING: CPU: 1 PID: 318 at kernel/trace/ring_buffer.c:1527 rb_update_pages+0x22f/0x260 Which is: RB_WARN_ON(cpu_buffer, nr_removed); Note each ring buffer page holds 4080 bytes. This is because: 1) 10 causes the ring buffer to have 3 pages. (10kb requires 3 * 4080 pages to hold) 2) (2^31 / 2^10 + 1) * 4080 = 8556384240 The value written into buffer_size_kb is shifted by 10 and then passed to ring_buffer_resize(). 8556384240 * 2^10 = 8761737461760 3) The size passed to ring_buffer_resize() is then divided by BUF_PAGE_SIZE which is 4080. 8761737461760 / 4080 = 2147484672 4) nr_pages is subtracted from the current nr_pages (3) and we get: 2147484669. This value is saved in a signed integer nr_pages_to_update 5) 2147484669 is greater than 2^31 but smaller than 2^32, a signed int turns into the value of -2147482627 6) As the value is a negative number, in update_pages_handler() it is negated and passed to rb_remove_pages() and 2147482627 pages will be removed, which is much larger than 3 and it causes the warning because not all the pages asked to be removed were removed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=118001 Cc: stable@vger.kernel.org # 2.6.28+ Fixes: 7a8e76a3829f1 ("tracing: unified trace buffer") Reported-by: Hao Qin <QEver.cn@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-12 18:01:24 +03:00
long nr_pages_same;
int cpu_i;
unsigned long nr_pages;
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
cpumask: use new operators in kernel/trace Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-12 15:45:30 +04:00
if (cpumask_test_cpu(cpu, buffer->cpumask))
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
return NOTIFY_OK;
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
nr_pages = 0;
nr_pages_same = 1;
/* check if all cpu sizes are same */
for_each_buffer_cpu(buffer, cpu_i) {
/* fill in the size from first enabled cpu */
if (nr_pages == 0)
nr_pages = buffer->buffers[cpu_i]->nr_pages;
if (nr_pages != buffer->buffers[cpu_i]->nr_pages) {
nr_pages_same = 0;
break;
}
}
/* allocate minimum pages, user can later expand it */
if (!nr_pages_same)
nr_pages = 2;
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
buffer->buffers[cpu] =
ring-buffer: Add per_cpu ring buffer control files Add a debugfs entry under per_cpu/ folder for each cpu called buffer_size_kb to control the ring buffer size for each CPU independently. If the global file buffer_size_kb is used to set size, the individual ring buffers will be adjusted to the given size. The buffer_size_kb will report the common size to maintain backward compatibility. If the buffer_size_kb file under the per_cpu/ directory is used to change buffer size for a specific CPU, only the size of the respective ring buffer is updated. When tracing/buffer_size_kb is read, it reports 'X' to indicate that sizes of per_cpu ring buffers are not equivalent. Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Cc: Justin Teravest <teravest@google.com> Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 00:00:41 +04:00
rb_allocate_cpu_buffer(buffer, nr_pages, cpu);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
if (!buffer->buffers[cpu]) {
WARN(1, "failed to allocate ring buffer on CPU %ld\n",
cpu);
return NOTIFY_OK;
}
smp_wmb();
cpumask: use new operators in kernel/trace Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <200906122115.30787.rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-12 15:45:30 +04:00
cpumask_set_cpu(cpu, buffer->cpumask);
ring-buffer: only allocate buffers for online cpus Impact: save on memory Currently, a ring buffer was allocated for each "possible_cpus". On some systems, this is the same as NR_CPUS. Thus, if a system defined NR_CPUS = 64 but it only had 1 CPU, we could have possibly 63 useless ring buffers taking up space. With a default buffer of 3 megs, this could be quite drastic. This patch changes the ring buffer code to only allocate ring buffers for online CPUs. If a CPU goes off line, we do not free the buffer. This is because the user may still have trace data in that buffer that they would like to look at. Perhaps in the future we could add code to delete a ring buffer if the CPU is offline and the ring buffer becomes empty. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-03-12 05:00:13 +03:00
break;
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
/*
* Do nothing.
* If we were to free the buffer, then the user would
* lose any trace that was in the buffer.
*/
break;
default:
break;
}
return NOTIFY_OK;
}
#endif
ring-buffer: Add ring buffer startup selftest When testing my large changes to the ftrace system, there was a bug that looked like the ring buffer was dropping events. I wrote up a quick integrity checker of the ring buffer to see if it was. Although the bug ended up being something stupid I did in ftrace, and had nothing to do with the ring buffer, I figured if I spent the time to write up this test, I might as well include it in the kernel. I cleaned it up a bit, as the original version was rather ugly. Not saying this version is pretty, but it's a beauty queen compared to what I original wrote. To enable the start up test, set CONFIG_RING_BUFFER_STARTUP_TEST. Note, it runs for 10 seconds, so it will slow your boot time by at least 10 more seconds. What it does is documented in both the comments and the Kconfig help. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-15 19:32:53 +04:00
#ifdef CONFIG_RING_BUFFER_STARTUP_TEST
/*
* This is a basic integrity check of the ring buffer.
* Late in the boot cycle this test will run when configured in.
* It will kick off a thread per CPU that will go into a loop
* writing to the per cpu ring buffer various sizes of data.
* Some of the data will be large items, some small.
*
* Another thread is created that goes into a spin, sending out
* IPIs to the other CPUs to also write into the ring buffer.
* this is to test the nesting ability of the buffer.
*
* Basic stats are recorded and reported. If something in the
* ring buffer should happen that's not expected, a big warning
* is displayed and all ring buffers are disabled.
*/
static struct task_struct *rb_threads[NR_CPUS] __initdata;
struct rb_test_data {
struct ring_buffer *buffer;
unsigned long events;
unsigned long bytes_written;
unsigned long bytes_alloc;
unsigned long bytes_dropped;
unsigned long events_nested;
unsigned long bytes_written_nested;
unsigned long bytes_alloc_nested;
unsigned long bytes_dropped_nested;
int min_size_nested;
int max_size_nested;
int max_size;
int min_size;
int cpu;
int cnt;
};
static struct rb_test_data rb_data[NR_CPUS] __initdata;
/* 1 meg per cpu */
#define RB_TEST_BUFFER_SIZE 1048576
static char rb_string[] __initdata =
"abcdefghijklmnopqrstuvwxyz1234567890!@#$%^&*()?+\\"
"?+|:';\",.<>/?abcdefghijklmnopqrstuvwxyz1234567890"
"!@#$%^&*()?+\\?+|:';\",.<>/?abcdefghijklmnopqrstuv";
static bool rb_test_started __initdata;
struct rb_item {
int size;
char str[];
};
static __init int rb_write_something(struct rb_test_data *data, bool nested)
{
struct ring_buffer_event *event;
struct rb_item *item;
bool started;
int event_len;
int size;
int len;
int cnt;
/* Have nested writes different that what is written */
cnt = data->cnt + (nested ? 27 : 0);
/* Multiply cnt by ~e, to make some unique increment */
size = (data->cnt * 68 / 25) % (sizeof(rb_string) - 1);
len = size + sizeof(struct rb_item);
started = rb_test_started;
/* read rb_test_started before checking buffer enabled */
smp_rmb();
event = ring_buffer_lock_reserve(data->buffer, len);
if (!event) {
/* Ignore dropped events before test starts. */
if (started) {
if (nested)
data->bytes_dropped += len;
else
data->bytes_dropped_nested += len;
}
return len;
}
event_len = ring_buffer_event_length(event);
if (RB_WARN_ON(data->buffer, event_len < len))
goto out;
item = ring_buffer_event_data(event);
item->size = size;
memcpy(item->str, rb_string, size);
if (nested) {
data->bytes_alloc_nested += event_len;
data->bytes_written_nested += len;
data->events_nested++;
if (!data->min_size_nested || len < data->min_size_nested)
data->min_size_nested = len;
if (len > data->max_size_nested)
data->max_size_nested = len;
} else {
data->bytes_alloc += event_len;
data->bytes_written += len;
data->events++;
if (!data->min_size || len < data->min_size)
data->max_size = len;
if (len > data->max_size)
data->max_size = len;
}
out:
ring_buffer_unlock_commit(data->buffer, event);
return 0;
}
static __init int rb_test(void *arg)
{
struct rb_test_data *data = arg;
while (!kthread_should_stop()) {
rb_write_something(data, false);
data->cnt++;
set_current_state(TASK_INTERRUPTIBLE);
/* Now sleep between a min of 100-300us and a max of 1ms */
usleep_range(((data->cnt % 3) + 1) * 100, 1000);
}
return 0;
}
static __init void rb_ipi(void *ignore)
{
struct rb_test_data *data;
int cpu = smp_processor_id();
data = &rb_data[cpu];
rb_write_something(data, true);
}
static __init int rb_hammer_test(void *arg)
{
while (!kthread_should_stop()) {
/* Send an IPI to all cpus to write data! */
smp_call_function(rb_ipi, NULL, 1);
/* No sleep, but for non preempt, let others run */
schedule();
}
return 0;
}
static __init int test_ringbuffer(void)
{
struct task_struct *rb_hammer;
struct ring_buffer *buffer;
int cpu;
int ret = 0;
pr_info("Running ring buffer tests...\n");
buffer = ring_buffer_alloc(RB_TEST_BUFFER_SIZE, RB_FL_OVERWRITE);
if (WARN_ON(!buffer))
return 0;
/* Disable buffer so that threads can't write to it yet */
ring_buffer_record_off(buffer);
for_each_online_cpu(cpu) {
rb_data[cpu].buffer = buffer;
rb_data[cpu].cpu = cpu;
rb_data[cpu].cnt = cpu;
rb_threads[cpu] = kthread_create(rb_test, &rb_data[cpu],
"rbtester/%d", cpu);
if (WARN_ON(!rb_threads[cpu])) {
pr_cont("FAILED\n");
ret = -1;
goto out_free;
}
kthread_bind(rb_threads[cpu], cpu);
wake_up_process(rb_threads[cpu]);
}
/* Now create the rb hammer! */
rb_hammer = kthread_run(rb_hammer_test, NULL, "rbhammer");
if (WARN_ON(!rb_hammer)) {
pr_cont("FAILED\n");
ret = -1;
goto out_free;
}
ring_buffer_record_on(buffer);
/*
* Show buffer is enabled before setting rb_test_started.
* Yes there's a small race window where events could be
* dropped and the thread wont catch it. But when a ring
* buffer gets enabled, there will always be some kind of
* delay before other CPUs see it. Thus, we don't care about
* those dropped events. We care about events dropped after
* the threads see that the buffer is active.
*/
smp_wmb();
rb_test_started = true;
set_current_state(TASK_INTERRUPTIBLE);
/* Just run for 10 seconds */;
schedule_timeout(10 * HZ);
kthread_stop(rb_hammer);
out_free:
for_each_online_cpu(cpu) {
if (!rb_threads[cpu])
break;
kthread_stop(rb_threads[cpu]);
}
if (ret) {
ring_buffer_free(buffer);
return ret;
}
/* Report! */
pr_info("finished\n");
for_each_online_cpu(cpu) {
struct ring_buffer_event *event;
struct rb_test_data *data = &rb_data[cpu];
struct rb_item *item;
unsigned long total_events;
unsigned long total_dropped;
unsigned long total_written;
unsigned long total_alloc;
unsigned long total_read = 0;
unsigned long total_size = 0;
unsigned long total_len = 0;
unsigned long total_lost = 0;
unsigned long lost;
int big_event_size;
int small_event_size;
ret = -1;
total_events = data->events + data->events_nested;
total_written = data->bytes_written + data->bytes_written_nested;
total_alloc = data->bytes_alloc + data->bytes_alloc_nested;
total_dropped = data->bytes_dropped + data->bytes_dropped_nested;
big_event_size = data->max_size + data->max_size_nested;
small_event_size = data->min_size + data->min_size_nested;
pr_info("CPU %d:\n", cpu);
pr_info(" events: %ld\n", total_events);
pr_info(" dropped bytes: %ld\n", total_dropped);
pr_info(" alloced bytes: %ld\n", total_alloc);
pr_info(" written bytes: %ld\n", total_written);
pr_info(" biggest event: %d\n", big_event_size);
pr_info(" smallest event: %d\n", small_event_size);
if (RB_WARN_ON(buffer, total_dropped))
break;
ret = 0;
while ((event = ring_buffer_consume(buffer, cpu, NULL, &lost))) {
total_lost += lost;
item = ring_buffer_event_data(event);
total_len += ring_buffer_event_length(event);
total_size += item->size + sizeof(struct rb_item);
if (memcmp(&item->str[0], rb_string, item->size) != 0) {
pr_info("FAILED!\n");
pr_info("buffer had: %.*s\n", item->size, item->str);
pr_info("expected: %.*s\n", item->size, rb_string);
RB_WARN_ON(buffer, 1);
ret = -1;
break;
}
total_read++;
}
if (ret)
break;
ret = -1;
pr_info(" read events: %ld\n", total_read);
pr_info(" lost events: %ld\n", total_lost);
pr_info(" total events: %ld\n", total_lost + total_read);
pr_info(" recorded len bytes: %ld\n", total_len);
pr_info(" recorded size bytes: %ld\n", total_size);
if (total_lost)
pr_info(" With dropped events, record len and size may not match\n"
" alloced and written from above\n");
if (!total_lost) {
if (RB_WARN_ON(buffer, total_len != total_alloc ||
total_size != total_written))
break;
}
if (RB_WARN_ON(buffer, total_lost + total_read != total_events))
break;
ret = 0;
}
if (!ret)
pr_info("Ring buffer PASSED!\n");
ring_buffer_free(buffer);
return 0;
}
late_initcall(test_ringbuffer);
#endif /* CONFIG_RING_BUFFER_STARTUP_TEST */