microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/powerpc/include/asm/dcr.h

79 строки
2.7 KiB
C
Исходник Обычный вид История

[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
/*
* (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
* the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ASM_POWERPC_DCR_H
#define _ASM_POWERPC_DCR_H
#ifdef __KERNEL__
[POWERPC] Refactor DCR code Previously, DCR support was configured at compile time to either use MMIO or native dcr instructions. Although this works for most platforms, it fails on FPGA platforms: 1) Systems may include more than one DCR bus. 2) Systems may be native DCR capable and still use memory mapped DCR interface. This patch provides runtime support based on the device trees for the case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both selected. Previously, this was a poorly defined configuration, which happened to provide NATIVE support. The runtime selection is made based on the dcr-controller having a 'dcr-access-method' attribute in the device tree. If only one of the above options is selected, then the code uses #defines to select only the used code in order to avoid introducing overhead in existing usage. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 22:29:17 +04:00
#ifndef __ASSEMBLY__
[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-11 08:15:47 +03:00
#ifdef CONFIG_PPC_DCR
[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
#ifdef CONFIG_PPC_DCR_NATIVE
#include <asm/dcr-native.h>
[POWERPC] Refactor DCR code Previously, DCR support was configured at compile time to either use MMIO or native dcr instructions. Although this works for most platforms, it fails on FPGA platforms: 1) Systems may include more than one DCR bus. 2) Systems may be native DCR capable and still use memory mapped DCR interface. This patch provides runtime support based on the device trees for the case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both selected. Previously, this was a poorly defined configuration, which happened to provide NATIVE support. The runtime selection is made based on the dcr-controller having a 'dcr-access-method' attribute in the device tree. If only one of the above options is selected, then the code uses #defines to select only the used code in order to avoid introducing overhead in existing usage. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 22:29:17 +04:00
#endif
#ifdef CONFIG_PPC_DCR_MMIO
[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
#include <asm/dcr-mmio.h>
#endif
[POWERPC] Refactor DCR code Previously, DCR support was configured at compile time to either use MMIO or native dcr instructions. Although this works for most platforms, it fails on FPGA platforms: 1) Systems may include more than one DCR bus. 2) Systems may be native DCR capable and still use memory mapped DCR interface. This patch provides runtime support based on the device trees for the case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both selected. Previously, this was a poorly defined configuration, which happened to provide NATIVE support. The runtime selection is made based on the dcr-controller having a 'dcr-access-method' attribute in the device tree. If only one of the above options is selected, then the code uses #defines to select only the used code in order to avoid introducing overhead in existing usage. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 22:29:17 +04:00
/* Indirection layer for providing both NATIVE and MMIO support. */
#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
#include <asm/dcr-generic.h>
#define DCR_MAP_OK(host) dcr_map_ok_generic(host)
#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
#else
#ifdef CONFIG_PPC_DCR_NATIVE
typedef dcr_host_native_t dcr_host_t;
#define DCR_MAP_OK(host) dcr_map_ok_native(host)
#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
#else
typedef dcr_host_mmio_t dcr_host_t;
#define DCR_MAP_OK(host) dcr_map_ok_mmio(host)
#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
#endif
#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
/*
powerpc: Remove use of CONFIG_PPC_MERGE Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-01 20:44:11 +04:00
* additional helpers to read the DCR * base from the device-tree
[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
*/
[POWERPC] Compile fixes for arch/powerpc dcr code The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-06 03:48:28 +03:00
struct device_node;
[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
extern unsigned int dcr_resource_start(struct device_node *np,
unsigned int index);
extern unsigned int dcr_resource_len(struct device_node *np,
unsigned int index);
[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-11 08:15:47 +03:00
#endif /* CONFIG_PPC_DCR */
[POWERPC] Refactor DCR code Previously, DCR support was configured at compile time to either use MMIO or native dcr instructions. Although this works for most platforms, it fails on FPGA platforms: 1) Systems may include more than one DCR bus. 2) Systems may be native DCR capable and still use memory mapped DCR interface. This patch provides runtime support based on the device trees for the case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both selected. Previously, this was a poorly defined configuration, which happened to provide NATIVE support. The runtime selection is made based on the dcr-controller having a 'dcr-access-method' attribute in the device tree. If only one of the above options is selected, then the code uses #defines to select only the used code in order to avoid introducing overhead in existing usage. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-06 22:29:17 +04:00
#endif /* __ASSEMBLY__ */
[POWERPC] Generic DCR infrastructure This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that can be used by drivers to transparently address either native DCRs or memory mapped DCRs. The implementation for memory mapped DCRs is done after the binding being currently worked on for SLOF and the Axon chipset. This patch enables it for the cell native platform Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 09:24:53 +03:00
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_H */