microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/powerpc/net/bpf_jit_asm.S

230 строки
6.3 KiB
ArmAsm
Исходник Обычный вид История

net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
/* bpf_jit.S: Packet/header access helper functions
* for PPC64 BPF compiler.
*
* Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#include <asm/ppc_asm.h>
#include "bpf_jit.h"
/*
* All of these routines are called directly from generated code,
* whose register usage is:
*
* r3 skb
* r4,r5 A,X
* r6 *** address parameter to helper ***
* r7-r10 scratch
* r14 skb->data
* r15 skb headlen
* r16-31 M[]
*/
/*
* To consider: These helpers are so small it could be better to just
* generate them inline. Inline code can do the simple headlen check
* then branch directly to slow_path_XXX if required. (In fact, could
* load a spare GPR with the address of slow_path_generic and pass size
* as an argument, making the call site a mtlr, li and bllr.)
*/
.globl sk_load_word
sk_load_word:
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPI r_addr, 0
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_slow_path_word_neg
.globl sk_load_word_positive_offset
sk_load_word_positive_offset:
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
/* Are we accessing past headlen? */
subi r_scratch1, r_HL, 4
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_scratch1, r_addr
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
blt bpf_slow_path_word
/* Nope, just hitting the header. cr0 here is eq or gt! */
powerpc/bpf: BPF JIT compiler for 64-bit Little Endian This enables the Berkeley Packet Filter JIT compiler for the PowerPC running in 64bit Little Endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 16:13:35 +04:00
#ifdef __LITTLE_ENDIAN__
lwbrx r_A, r_D, r_addr
#else
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
lwzx r_A, r_D, r_addr
powerpc/bpf: BPF JIT compiler for 64-bit Little Endian This enables the Berkeley Packet Filter JIT compiler for the PowerPC running in 64bit Little Endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 16:13:35 +04:00
#endif
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
blr /* Return success, cr0 != LT */
.globl sk_load_half
sk_load_half:
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPI r_addr, 0
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_slow_path_half_neg
.globl sk_load_half_positive_offset
sk_load_half_positive_offset:
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
subi r_scratch1, r_HL, 2
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_scratch1, r_addr
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
blt bpf_slow_path_half
powerpc/bpf: BPF JIT compiler for 64-bit Little Endian This enables the Berkeley Packet Filter JIT compiler for the PowerPC running in 64bit Little Endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 16:13:35 +04:00
#ifdef __LITTLE_ENDIAN__
lhbrx r_A, r_D, r_addr
#else
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
lhzx r_A, r_D, r_addr
powerpc/bpf: BPF JIT compiler for 64-bit Little Endian This enables the Berkeley Packet Filter JIT compiler for the PowerPC running in 64bit Little Endian. Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-24 16:13:35 +04:00
#endif
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
blr
.globl sk_load_byte
sk_load_byte:
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPI r_addr, 0
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_slow_path_byte_neg
.globl sk_load_byte_positive_offset
sk_load_byte_positive_offset:
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_HL, r_addr
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
ble bpf_slow_path_byte
lbzx r_A, r_D, r_addr
blr
/*
net: filter: get rid of BPF_S_* enum This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Acked-by: Chema Gonzalez <chemag@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 12:22:50 +04:00
* BPF_LDX | BPF_B | BPF_MSH: ldxb 4*([offset]&0xf)
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
* r_addr is the offset value
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
*/
.globl sk_load_byte_msh
sk_load_byte_msh:
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPI r_addr, 0
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_slow_path_byte_msh_neg
.globl sk_load_byte_msh_positive_offset
sk_load_byte_msh_positive_offset:
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_HL, r_addr
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
ble bpf_slow_path_byte_msh
lbzx r_X, r_D, r_addr
rlwinm r_X, r_X, 2, 32-4-2, 31-2
blr
/* Call out to skb_copy_bits:
* We'll need to back up our volatile regs first; we have
* local variable space at r1+(BPF_PPC_STACK_BASIC).
* Allocate a new stack frame here to remain ABI-compliant in
* stashing LR.
*/
#define bpf_slow_path_common(SIZE) \
mflr r0; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_STL r0, PPC_LR_STKOFF(r1); \
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
/* R3 goes in parameter space of caller's frame */ \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_STL r_skb, (BPF_PPC_STACKFRAME+BPF_PPC_STACK_R3_OFF)(r1); \
PPC_STL r_A, (BPF_PPC_STACK_BASIC+(0*REG_SZ))(r1); \
PPC_STL r_X, (BPF_PPC_STACK_BASIC+(1*REG_SZ))(r1); \
addi r5, r1, BPF_PPC_STACK_BASIC+(2*REG_SZ); \
PPC_STLU r1, -BPF_PPC_SLOWPATH_FRAME(r1); \
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
/* R3 = r_skb, as passed */ \
mr r4, r_addr; \
li r6, SIZE; \
bl skb_copy_bits; \
powerpc: Fix BPF_JIT code to link with multiple TOCs If the kernel is big enough (eg. allyesconfig), the linker may need to switch TOCs when calling from the BPF JIT code out to the external helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()). In order to do that we need to leave space after the bl for the linker to insert a reload of our TOC pointer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-21 21:50:27 +04:00
nop; \
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
/* R3 = 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LL r0, PPC_LR_STKOFF(r1); \
PPC_LL r_A, (BPF_PPC_STACK_BASIC+(0*REG_SZ))(r1); \
PPC_LL r_X, (BPF_PPC_STACK_BASIC+(1*REG_SZ))(r1); \
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
mtlr r0; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPI r3, 0; \
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
blt bpf_error; /* cr0 = LT */ \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LL r_skb, (BPF_PPC_STACKFRAME+BPF_PPC_STACK_R3_OFF)(r1); \
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
/* Great success! */
bpf_slow_path_word:
bpf_slow_path_common(4)
/* Data value is on stack, and cr0 != LT */
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
lwz r_A, BPF_PPC_STACK_BASIC+(2*REG_SZ)(r1)
net: filter: BPF 'JIT' compiler for PPC64 An implementation of a code generator for BPF programs to speed up packet filtering on PPC64, inspired by Eric Dumazet's x86-64 version. Filter code is generated as an ABI-compliant function in module_alloc()'d mem with stackframe & prologue/epilogue generated if required (simple filters don't need anything more than an li/blr). The filter's local variables, M[], live in registers. Supports all BPF opcodes, although "complicated" loads from negative packet offsets (e.g. SKF_LL_OFF) are not yet supported. There are a couple of further optimisations left for future work; many-pass assembly with branch-reach reduction and a register allocator to push M[] variables into volatile registers would improve the code quality further. This currently supports big-endian 64-bit PowerPC only (but is fairly simple to port to PPC32 or LE!). Enabled in the same way as x86-64: echo 1 > /proc/sys/net/core/bpf_jit_enable Or, enabled with extra debug output: echo 2 > /proc/sys/net/core/bpf_jit_enable Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20 19:51:00 +04:00
blr
bpf_slow_path_half:
bpf_slow_path_common(2)
lhz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1)
blr
bpf_slow_path_byte:
bpf_slow_path_common(1)
lbz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1)
blr
bpf_slow_path_byte_msh:
bpf_slow_path_common(1)
lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
rlwinm r_X, r_X, 2, 32-4-2, 31-2
blr
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
/* Call out to bpf_internal_load_pointer_neg_helper:
* We'll need to back up our volatile regs first; we have
* local variable space at r1+(BPF_PPC_STACK_BASIC).
* Allocate a new stack frame here to remain ABI-compliant in
* stashing LR.
*/
#define sk_negative_common(SIZE) \
mflr r0; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_STL r0, PPC_LR_STKOFF(r1); \
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
/* R3 goes in parameter space of caller's frame */ \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_STL r_skb, (BPF_PPC_STACKFRAME+BPF_PPC_STACK_R3_OFF)(r1); \
PPC_STL r_A, (BPF_PPC_STACK_BASIC+(0*REG_SZ))(r1); \
PPC_STL r_X, (BPF_PPC_STACK_BASIC+(1*REG_SZ))(r1); \
PPC_STLU r1, -BPF_PPC_SLOWPATH_FRAME(r1); \
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
/* R3 = r_skb, as passed */ \
mr r4, r_addr; \
li r5, SIZE; \
bl bpf_internal_load_pointer_neg_helper; \
powerpc: Fix BPF_JIT code to link with multiple TOCs If the kernel is big enough (eg. allyesconfig), the linker may need to switch TOCs when calling from the BPF JIT code out to the external helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()). In order to do that we need to leave space after the bl for the linker to insert a reload of our TOC pointer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-21 21:50:27 +04:00
nop; \
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
/* R3 != 0 on success */ \
addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LL r0, PPC_LR_STKOFF(r1); \
PPC_LL r_A, (BPF_PPC_STACK_BASIC+(0*REG_SZ))(r1); \
PPC_LL r_X, (BPF_PPC_STACK_BASIC+(1*REG_SZ))(r1); \
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
mtlr r0; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPLI r3, 0; \
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
beq bpf_error_slow; /* cr0 = EQ */ \
mr r_addr, r3; \
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LL r_skb, (BPF_PPC_STACKFRAME+BPF_PPC_STACK_R3_OFF)(r1); \
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
/* Great success! */
bpf_slow_path_word_neg:
lis r_scratch1,-32 /* SKF_LL_OFF */
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_addr, r_scratch1 /* addr < SKF_* */
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_error /* cr0 = LT */
.globl sk_load_word_negative_offset
sk_load_word_negative_offset:
sk_negative_common(4)
lwz r_A, 0(r_addr)
blr
bpf_slow_path_half_neg:
lis r_scratch1,-32 /* SKF_LL_OFF */
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_addr, r_scratch1 /* addr < SKF_* */
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_error /* cr0 = LT */
.globl sk_load_half_negative_offset
sk_load_half_negative_offset:
sk_negative_common(2)
lhz r_A, 0(r_addr)
blr
bpf_slow_path_byte_neg:
lis r_scratch1,-32 /* SKF_LL_OFF */
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_addr, r_scratch1 /* addr < SKF_* */
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_error /* cr0 = LT */
.globl sk_load_byte_negative_offset
sk_load_byte_negative_offset:
sk_negative_common(1)
lbz r_A, 0(r_addr)
blr
bpf_slow_path_byte_msh_neg:
lis r_scratch1,-32 /* SKF_LL_OFF */
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMP r_addr, r_scratch1 /* addr < SKF_* */
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
blt bpf_error /* cr0 = LT */
.globl sk_load_byte_msh_negative_offset
sk_load_byte_msh_negative_offset:
sk_negative_common(1)
lbz r_X, 0(r_addr)
rlwinm r_X, r_X, 2, 32-4-2, 31-2
blr
bpf_error_slow:
/* fabricate a cr0 = lt */
li r_scratch1, -1
ppc: bpf: update jit to use compatibility macros Use helpers from the asm-compat.h to wrap up assembly mnemonics Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-17 10:04:40 +03:00
PPC_LCMPI r_scratch1, 0
bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jan Seiffert <kaffeemonster@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 23:02:19 +04:00
bpf_error:
/* Entered with cr0 = lt */
li r3, 0
/* Generated code will 'blt epilogue', returning 0. */
blr