kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/*
|
|
|
|
* Test the function and performance of kallsyms
|
|
|
|
*
|
|
|
|
* Copyright (C) Huawei Technologies Co., Ltd., 2022
|
|
|
|
*
|
|
|
|
* Authors: Zhen Lei <thunder.leizhen@huawei.com> Huawei
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define pr_fmt(fmt) "kallsyms_selftest: " fmt
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kallsyms.h>
|
|
|
|
#include <linux/random.h>
|
|
|
|
#include <linux/sched/clock.h>
|
|
|
|
#include <linux/kthread.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
|
|
|
|
#include "kallsyms_internal.h"
|
|
|
|
#include "kallsyms_selftest.h"
|
|
|
|
|
|
|
|
|
|
|
|
#define MAX_NUM_OF_RECORDS 64
|
|
|
|
|
|
|
|
struct test_stat {
|
|
|
|
int min;
|
|
|
|
int max;
|
|
|
|
int save_cnt;
|
|
|
|
int real_cnt;
|
|
|
|
int perf;
|
|
|
|
u64 sum;
|
|
|
|
char *name;
|
|
|
|
unsigned long addr;
|
|
|
|
unsigned long addrs[MAX_NUM_OF_RECORDS];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct test_item {
|
|
|
|
char *name;
|
|
|
|
unsigned long addr;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define ITEM_FUNC(s) \
|
|
|
|
{ \
|
|
|
|
.name = #s, \
|
|
|
|
.addr = (unsigned long)s, \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define ITEM_DATA(s) \
|
|
|
|
{ \
|
|
|
|
.name = #s, \
|
|
|
|
.addr = (unsigned long)&s, \
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int kallsyms_test_var_bss_static;
|
|
|
|
static int kallsyms_test_var_data_static = 1;
|
|
|
|
int kallsyms_test_var_bss;
|
|
|
|
int kallsyms_test_var_data = 1;
|
|
|
|
|
|
|
|
static int kallsyms_test_func_static(void)
|
|
|
|
{
|
|
|
|
kallsyms_test_var_bss_static++;
|
|
|
|
kallsyms_test_var_data_static++;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int kallsyms_test_func(void)
|
|
|
|
{
|
|
|
|
return kallsyms_test_func_static();
|
|
|
|
}
|
|
|
|
|
|
|
|
__weak int kallsyms_test_func_weak(void)
|
|
|
|
{
|
|
|
|
kallsyms_test_var_bss++;
|
|
|
|
kallsyms_test_var_data++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct test_item test_items[] = {
|
|
|
|
ITEM_FUNC(kallsyms_test_func_static),
|
|
|
|
ITEM_FUNC(kallsyms_test_func),
|
|
|
|
ITEM_FUNC(kallsyms_test_func_weak),
|
|
|
|
ITEM_FUNC(vmalloc),
|
|
|
|
ITEM_FUNC(vfree),
|
|
|
|
#ifdef CONFIG_KALLSYMS_ALL
|
|
|
|
ITEM_DATA(kallsyms_test_var_bss_static),
|
|
|
|
ITEM_DATA(kallsyms_test_var_data_static),
|
|
|
|
ITEM_DATA(kallsyms_test_var_bss),
|
|
|
|
ITEM_DATA(kallsyms_test_var_data),
|
|
|
|
ITEM_DATA(vmap_area_list),
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
static char stub_name[KSYM_NAME_LEN];
|
|
|
|
|
2023-03-08 10:38:46 +03:00
|
|
|
static int stat_symbol_len(void *data, const char *name, unsigned long addr)
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
{
|
|
|
|
*(u32 *)data += strlen(name);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void test_kallsyms_compression_ratio(void)
|
|
|
|
{
|
|
|
|
u32 pos, off, len, num;
|
|
|
|
u32 ratio, total_size, total_len = 0;
|
|
|
|
|
|
|
|
kallsyms_on_each_symbol(stat_symbol_len, &total_len);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* A symbol name cannot start with a number. This stub name helps us
|
|
|
|
* traverse the entire symbol table without finding a match. It's used
|
|
|
|
* for subsequent performance tests, and its length is the average
|
|
|
|
* length of all symbol names.
|
|
|
|
*/
|
|
|
|
memset(stub_name, '4', sizeof(stub_name));
|
|
|
|
pos = total_len / kallsyms_num_syms;
|
|
|
|
stub_name[pos] = 0;
|
|
|
|
|
|
|
|
pos = 0;
|
|
|
|
num = 0;
|
|
|
|
off = 0;
|
|
|
|
while (pos < kallsyms_num_syms) {
|
|
|
|
len = kallsyms_names[off];
|
|
|
|
num++;
|
|
|
|
off++;
|
|
|
|
pos++;
|
|
|
|
if ((len & 0x80) != 0) {
|
|
|
|
len = (len & 0x7f) | (kallsyms_names[off] << 7);
|
|
|
|
num++;
|
|
|
|
off++;
|
|
|
|
}
|
|
|
|
off += len;
|
2022-11-18 03:58:52 +03:00
|
|
|
}
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* 1. The length fields is not counted
|
|
|
|
* 2. The memory occupied by array kallsyms_token_table[] and
|
|
|
|
* kallsyms_token_index[] needs to be counted.
|
|
|
|
*/
|
|
|
|
total_size = off - num;
|
|
|
|
pos = kallsyms_token_index[0xff];
|
|
|
|
total_size += pos + strlen(&kallsyms_token_table[pos]) + 1;
|
|
|
|
total_size += 0x100 * sizeof(u16);
|
|
|
|
|
|
|
|
pr_info(" ---------------------------------------------------------\n");
|
|
|
|
pr_info("| nr_symbols | compressed size | original size | ratio(%%) |\n");
|
|
|
|
pr_info("|---------------------------------------------------------|\n");
|
|
|
|
ratio = (u32)div_u64(10000ULL * total_size, total_len);
|
|
|
|
pr_info("| %10d | %10d | %10d | %2d.%-2d |\n",
|
|
|
|
kallsyms_num_syms, total_size, total_len, ratio / 100, ratio % 100);
|
|
|
|
pr_info(" ---------------------------------------------------------\n");
|
|
|
|
}
|
|
|
|
|
2023-03-08 10:38:46 +03:00
|
|
|
static int lookup_name(void *data, const char *name, unsigned long addr)
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
{
|
|
|
|
u64 t0, t1, t;
|
|
|
|
struct test_stat *stat = (struct test_stat *)data;
|
|
|
|
|
2023-01-12 13:54:26 +03:00
|
|
|
t0 = ktime_get_ns();
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
(void)kallsyms_lookup_name(name);
|
2023-01-12 13:54:26 +03:00
|
|
|
t1 = ktime_get_ns();
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
|
|
|
|
t = t1 - t0;
|
|
|
|
if (t < stat->min)
|
|
|
|
stat->min = t;
|
|
|
|
|
|
|
|
if (t > stat->max)
|
|
|
|
stat->max = t;
|
|
|
|
|
|
|
|
stat->real_cnt++;
|
|
|
|
stat->sum += t;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void test_perf_kallsyms_lookup_name(void)
|
|
|
|
{
|
|
|
|
struct test_stat stat;
|
|
|
|
|
|
|
|
memset(&stat, 0, sizeof(stat));
|
|
|
|
stat.min = INT_MAX;
|
|
|
|
kallsyms_on_each_symbol(lookup_name, &stat);
|
|
|
|
pr_info("kallsyms_lookup_name() looked up %d symbols\n", stat.real_cnt);
|
|
|
|
pr_info("The time spent on each symbol is (ns): min=%d, max=%d, avg=%lld\n",
|
|
|
|
stat.min, stat.max, div_u64(stat.sum, stat.real_cnt));
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool match_cleanup_name(const char *s, const char *name)
|
|
|
|
{
|
|
|
|
char *p;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (!IS_ENABLED(CONFIG_LTO_CLANG))
|
|
|
|
return false;
|
|
|
|
|
kallsyms: Fix kallsyms_selftest failure
Kernel test robot reported a kallsyms_test failure when clang lto is
enabled (thin or full) and CONFIG_KALLSYMS_SELFTEST is also enabled.
I can reproduce in my local environment with the following error message
with thin lto:
[ 1.877897] kallsyms_selftest: Test for 1750th symbol failed: (tsc_cs_mark_unstable) addr=ffffffff81038090
[ 1.877901] kallsyms_selftest: abort
It appears that commit 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes
from promoted global functions") caused the failure. Commit 8cc32a9bbf29
changed cleanup_symbol_name() based on ".llvm." instead of '.' where
".llvm." is appended to a before-lto-optimization local symbol name.
We need to propagate such knowledge in kallsyms_selftest.c as well.
Further more, compare_symbol_name() in kallsyms.c needs change as well.
In scripts/kallsyms.c, kallsyms_names and kallsyms_seqs_of_names are used
to record symbol names themselves and index to symbol names respectively.
For example:
kallsyms_names:
...
__amd_smn_rw._entry <== seq 1000
__amd_smn_rw._entry.5 <== seq 1001
__amd_smn_rw.llvm.<hash> <== seq 1002
...
kallsyms_seqs_of_names are sorted based on cleanup_symbol_name() through, so
the order in kallsyms_seqs_of_names actually has
index 1000: seq 1002 <== __amd_smn_rw.llvm.<hash> (actual symbol comparison using '__amd_smn_rw')
index 1001: seq 1000 <== __amd_smn_rw._entry
index 1002: seq 1001 <== __amd_smn_rw._entry.5
Let us say at a particular point, at index 1000, symbol '__amd_smn_rw.llvm.<hash>'
is comparing to '__amd_smn_rw._entry' where '__amd_smn_rw._entry' is the one to
search e.g., with function kallsyms_on_each_match_symbol(). The current implementation
will find out '__amd_smn_rw._entry' is less than '__amd_smn_rw.llvm.<hash>' and
then continue to search e.g., index 999 and never found a match although the actual
index 1001 is a match.
To fix this issue, let us do cleanup_symbol_name() first and then do comparison.
In the above case, comparing '__amd_smn_rw' vs '__amd_smn_rw._entry' and
'__amd_smn_rw._entry' being greater than '__amd_smn_rw', the next comparison will
be > index 1000 and eventually index 1001 will be hit an a match is found.
For any symbols not having '.llvm.' substr, there is no functionality change
for compare_symbol_name().
Fixes: 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308232200.1c932a90-oliver.sang@intel.com
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Song Liu <song@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230825034659.1037627-1-yonghong.song@linux.dev
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
2023-08-25 06:46:59 +03:00
|
|
|
p = strstr(s, ".llvm.");
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
if (!p)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
len = strlen(name);
|
|
|
|
if (p - s != len)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
return !strncmp(s, name, len);
|
|
|
|
}
|
|
|
|
|
2023-03-08 10:38:46 +03:00
|
|
|
static int find_symbol(void *data, const char *name, unsigned long addr)
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
{
|
|
|
|
struct test_stat *stat = (struct test_stat *)data;
|
|
|
|
|
|
|
|
if (strcmp(name, stat->name) == 0 ||
|
|
|
|
(!stat->perf && match_cleanup_name(name, stat->name))) {
|
|
|
|
stat->real_cnt++;
|
|
|
|
stat->addr = addr;
|
|
|
|
|
|
|
|
if (stat->save_cnt < MAX_NUM_OF_RECORDS) {
|
|
|
|
stat->addrs[stat->save_cnt] = addr;
|
|
|
|
stat->save_cnt++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (stat->real_cnt == stat->max)
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void test_perf_kallsyms_on_each_symbol(void)
|
|
|
|
{
|
|
|
|
u64 t0, t1;
|
|
|
|
struct test_stat stat;
|
|
|
|
|
|
|
|
memset(&stat, 0, sizeof(stat));
|
|
|
|
stat.max = INT_MAX;
|
|
|
|
stat.name = stub_name;
|
|
|
|
stat.perf = 1;
|
2023-01-12 13:54:26 +03:00
|
|
|
t0 = ktime_get_ns();
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
kallsyms_on_each_symbol(find_symbol, &stat);
|
2023-01-12 13:54:26 +03:00
|
|
|
t1 = ktime_get_ns();
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
pr_info("kallsyms_on_each_symbol() traverse all: %lld ns\n", t1 - t0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int match_symbol(void *data, unsigned long addr)
|
|
|
|
{
|
|
|
|
struct test_stat *stat = (struct test_stat *)data;
|
|
|
|
|
|
|
|
stat->real_cnt++;
|
|
|
|
stat->addr = addr;
|
|
|
|
|
|
|
|
if (stat->save_cnt < MAX_NUM_OF_RECORDS) {
|
|
|
|
stat->addrs[stat->save_cnt] = addr;
|
|
|
|
stat->save_cnt++;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (stat->real_cnt == stat->max)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void test_perf_kallsyms_on_each_match_symbol(void)
|
|
|
|
{
|
|
|
|
u64 t0, t1;
|
|
|
|
struct test_stat stat;
|
|
|
|
|
|
|
|
memset(&stat, 0, sizeof(stat));
|
|
|
|
stat.max = INT_MAX;
|
|
|
|
stat.name = stub_name;
|
2023-01-12 13:54:26 +03:00
|
|
|
t0 = ktime_get_ns();
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
kallsyms_on_each_match_symbol(match_symbol, stat.name, &stat);
|
2023-01-12 13:54:26 +03:00
|
|
|
t1 = ktime_get_ns();
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
pr_info("kallsyms_on_each_match_symbol() traverse all: %lld ns\n", t1 - t0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int test_kallsyms_basic_function(void)
|
|
|
|
{
|
|
|
|
int i, j, ret;
|
|
|
|
int next = 0, nr_failed = 0;
|
|
|
|
char *prefix;
|
|
|
|
unsigned short rand;
|
|
|
|
unsigned long addr, lookup_addr;
|
|
|
|
char namebuf[KSYM_NAME_LEN];
|
|
|
|
struct test_stat *stat, *stat2;
|
|
|
|
|
|
|
|
stat = kmalloc(sizeof(*stat) * 2, GFP_KERNEL);
|
|
|
|
if (!stat)
|
|
|
|
return -ENOMEM;
|
|
|
|
stat2 = stat + 1;
|
|
|
|
|
|
|
|
prefix = "kallsyms_lookup_name() for";
|
|
|
|
for (i = 0; i < ARRAY_SIZE(test_items); i++) {
|
|
|
|
addr = kallsyms_lookup_name(test_items[i].name);
|
|
|
|
if (addr != test_items[i].addr) {
|
|
|
|
nr_failed++;
|
|
|
|
pr_info("%s %s failed: addr=%lx, expect %lx\n",
|
|
|
|
prefix, test_items[i].name, addr, test_items[i].addr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
prefix = "kallsyms_on_each_symbol() for";
|
|
|
|
for (i = 0; i < ARRAY_SIZE(test_items); i++) {
|
|
|
|
memset(stat, 0, sizeof(*stat));
|
|
|
|
stat->max = INT_MAX;
|
|
|
|
stat->name = test_items[i].name;
|
|
|
|
kallsyms_on_each_symbol(find_symbol, stat);
|
|
|
|
if (stat->addr != test_items[i].addr || stat->real_cnt != 1) {
|
|
|
|
nr_failed++;
|
|
|
|
pr_info("%s %s failed: count=%d, addr=%lx, expect %lx\n",
|
|
|
|
prefix, test_items[i].name,
|
|
|
|
stat->real_cnt, stat->addr, test_items[i].addr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
prefix = "kallsyms_on_each_match_symbol() for";
|
|
|
|
for (i = 0; i < ARRAY_SIZE(test_items); i++) {
|
|
|
|
memset(stat, 0, sizeof(*stat));
|
|
|
|
stat->max = INT_MAX;
|
|
|
|
stat->name = test_items[i].name;
|
|
|
|
kallsyms_on_each_match_symbol(match_symbol, test_items[i].name, stat);
|
|
|
|
if (stat->addr != test_items[i].addr || stat->real_cnt != 1) {
|
|
|
|
nr_failed++;
|
|
|
|
pr_info("%s %s failed: count=%d, addr=%lx, expect %lx\n",
|
|
|
|
prefix, test_items[i].name,
|
|
|
|
stat->real_cnt, stat->addr, test_items[i].addr);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (nr_failed) {
|
|
|
|
kfree(stat);
|
|
|
|
return -ESRCH;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < kallsyms_num_syms; i++) {
|
|
|
|
addr = kallsyms_sym_address(i);
|
|
|
|
if (!is_ksym_addr(addr))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = lookup_symbol_name(addr, namebuf);
|
|
|
|
if (unlikely(ret)) {
|
|
|
|
namebuf[0] = 0;
|
2023-08-24 23:58:00 +03:00
|
|
|
pr_info("%d: lookup_symbol_name(%lx) failed\n", i, addr);
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
goto failed;
|
|
|
|
}
|
|
|
|
|
|
|
|
lookup_addr = kallsyms_lookup_name(namebuf);
|
|
|
|
|
|
|
|
memset(stat, 0, sizeof(*stat));
|
|
|
|
stat->max = INT_MAX;
|
|
|
|
kallsyms_on_each_match_symbol(match_symbol, namebuf, stat);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* kallsyms_on_each_symbol() is too slow, randomly select some
|
|
|
|
* symbols for test.
|
|
|
|
*/
|
|
|
|
if (i >= next) {
|
|
|
|
memset(stat2, 0, sizeof(*stat2));
|
|
|
|
stat2->max = INT_MAX;
|
|
|
|
stat2->name = namebuf;
|
|
|
|
kallsyms_on_each_symbol(find_symbol, stat2);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* kallsyms_on_each_symbol() and kallsyms_on_each_match_symbol()
|
|
|
|
* need to get the same traversal result.
|
|
|
|
*/
|
|
|
|
if (stat->addr != stat2->addr ||
|
|
|
|
stat->real_cnt != stat2->real_cnt ||
|
|
|
|
memcmp(stat->addrs, stat2->addrs,
|
2023-08-24 23:58:00 +03:00
|
|
|
stat->save_cnt * sizeof(stat->addrs[0]))) {
|
|
|
|
pr_info("%s: mismatch between kallsyms_on_each_symbol() and kallsyms_on_each_match_symbol()\n",
|
|
|
|
namebuf);
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
goto failed;
|
2023-08-24 23:58:00 +03:00
|
|
|
}
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The average of random increments is 128, that is, one of
|
|
|
|
* them is tested every 128 symbols.
|
|
|
|
*/
|
|
|
|
get_random_bytes(&rand, sizeof(rand));
|
|
|
|
next = i + (rand & 0xff) + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Need to be found at least once */
|
2023-08-24 23:58:00 +03:00
|
|
|
if (!stat->real_cnt) {
|
|
|
|
pr_info("%s: Never found\n", namebuf);
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
goto failed;
|
2023-08-24 23:58:00 +03:00
|
|
|
}
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* kallsyms_lookup_name() returns the address of the first
|
|
|
|
* symbol found and cannot be NULL.
|
|
|
|
*/
|
2023-08-24 23:58:00 +03:00
|
|
|
if (!lookup_addr) {
|
|
|
|
pr_info("%s: NULL lookup_addr?!\n", namebuf);
|
|
|
|
goto failed;
|
|
|
|
}
|
|
|
|
if (lookup_addr != stat->addrs[0]) {
|
|
|
|
pr_info("%s: lookup_addr != stat->addrs[0]\n", namebuf);
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
goto failed;
|
2023-08-24 23:58:00 +03:00
|
|
|
}
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the addresses of all matching symbols are recorded, the
|
|
|
|
* target address needs to be exist.
|
|
|
|
*/
|
|
|
|
if (stat->real_cnt <= MAX_NUM_OF_RECORDS) {
|
|
|
|
for (j = 0; j < stat->save_cnt; j++) {
|
|
|
|
if (stat->addrs[j] == addr)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2023-08-24 23:58:00 +03:00
|
|
|
if (j == stat->save_cnt) {
|
|
|
|
pr_info("%s: j == save_cnt?!\n", namebuf);
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
goto failed;
|
2023-08-24 23:58:00 +03:00
|
|
|
}
|
kallsyms: Add self-test facility
Added test cases for basic functions and performance of functions
kallsyms_lookup_name(), kallsyms_on_each_symbol() and
kallsyms_on_each_match_symbol(). It also calculates the compression rate
of the kallsyms compression algorithm for the current symbol set.
The basic functions test begins by testing a set of symbols whose address
values are known. Then, traverse all symbol addresses and find the
corresponding symbol name based on the address. It's impossible to
determine whether these addresses are correct, but we can use the above
three functions along with the addresses to test each other. Due to the
traversal operation of kallsyms_on_each_symbol() is too slow, only 60
symbols can be tested in one second, so let it test on average once
every 128 symbols. The other two functions validate all symbols.
If the basic functions test is passed, print only performance test
results. If the test fails, print error information, but do not perform
subsequent performance tests.
Start self-test automatically after system startup if
CONFIG_KALLSYMS_SELFTEST=y.
Example of output content: (prefix 'kallsyms_selftest:' is omitted
start
---------------------------------------------------------
| nr_symbols | compressed size | original size | ratio(%) |
|---------------------------------------------------------|
| 107543 | 1357912 | 2407433 | 56.40 |
---------------------------------------------------------
kallsyms_lookup_name() looked up 107543 symbols
The time spent on each symbol is (ns): min=630, max=35295, avg=7353
kallsyms_on_each_symbol() traverse all: 11782628 ns
kallsyms_on_each_match_symbol() traverse all: 9261 ns
finish
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-11-15 11:33:48 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(stat);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
failed:
|
|
|
|
pr_info("Test for %dth symbol failed: (%s) addr=%lx", i, namebuf, addr);
|
|
|
|
kfree(stat);
|
|
|
|
return -ESRCH;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int test_entry(void *p)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
do {
|
|
|
|
schedule_timeout(5 * HZ);
|
|
|
|
} while (system_state != SYSTEM_RUNNING);
|
|
|
|
|
|
|
|
pr_info("start\n");
|
|
|
|
ret = test_kallsyms_basic_function();
|
|
|
|
if (ret) {
|
|
|
|
pr_info("abort\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
test_kallsyms_compression_ratio();
|
|
|
|
test_perf_kallsyms_lookup_name();
|
|
|
|
test_perf_kallsyms_on_each_symbol();
|
|
|
|
test_perf_kallsyms_on_each_match_symbol();
|
|
|
|
pr_info("finish\n");
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init kallsyms_test_init(void)
|
|
|
|
{
|
|
|
|
struct task_struct *t;
|
|
|
|
|
|
|
|
t = kthread_create(test_entry, NULL, "kallsyms_test");
|
|
|
|
if (IS_ERR(t)) {
|
|
|
|
pr_info("Create kallsyms selftest task failed\n");
|
|
|
|
return PTR_ERR(t);
|
|
|
|
}
|
|
|
|
kthread_bind(t, 0);
|
|
|
|
wake_up_process(t);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
late_initcall(kallsyms_test_init);
|