WSL2-Linux-Kernel/Documentation/cpu-freq/cpufreq-nforce2.txt

20 строки
597 B
Plaintext
Исходник Обычный вид История

The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 platforms.
This works better than on other platforms, because the FSB of the CPU
can be controlled independently from the PCI/AGP clock.
The module has two options:
fid: multiplier * 10 (for example 8.5 = 85)
min_fsb: minimum FSB
If not set, fid is calculated from the current CPU speed and the FSB.
min_fsb defaults to FSB at boot time - 50 MHz.
IMPORTANT: The available range is limited downwards!
Also the minimum available FSB can differ, for systems
booting with 200 MHz, 150 should always work.