WSL2-Linux-Kernel/kernel/irq/chip.c

1451 строка
36 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
* Copyright (C) 2005-2006, Thomas Gleixner, Russell King
*
* This file contains the core interrupt handling code, for irq-chip based
* architectures. Detailed information is available in
* Documentation/core-api/genericirq.rst
*/
#include <linux/irq.h>
#include <linux/msi.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 17:20:14 +03:00
#include <linux/irqdomain.h>
#include <trace/events/irq.h>
#include "internals.h"
genirq: Allow migration of chained interrupts by installing default action When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-05 13:12:15 +03:00
static irqreturn_t bad_chained_irq(int irq, void *dev_id)
{
WARN_ONCE(1, "Chained irq %d should not call an action\n", irq);
return IRQ_NONE;
}
/*
* Chained handlers should never call action on their IRQ. This default
* action will emit warning if such thing happens.
*/
struct irqaction chained_action = {
.handler = bad_chained_irq,
};
/**
* irq_set_chip - set the irq chip for an irq
* @irq: irq number
* @chip: pointer to irq chip description structure
*/
int irq_set_chip(unsigned int irq, struct irq_chip *chip)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
if (!chip)
chip = &no_irq_chip;
desc->irq_data.chip = chip;
irq_put_desc_unlock(desc, flags);
/*
* For !CONFIG_SPARSE_IRQ make the irq show up in
* allocated_irqs.
*/
irq_mark_irq(irq);
return 0;
}
EXPORT_SYMBOL(irq_set_chip);
/**
* irq_set_type - set the irq trigger type for an irq
* @irq: irq number
* @type: IRQ_TYPE_{LEVEL,EDGE}_* value - see include/linux/irq.h
*/
int irq_set_irq_type(unsigned int irq, unsigned int type)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
int ret = 0;
if (!desc)
return -EINVAL;
ret = __irq_set_trigger(desc, type);
irq_put_desc_busunlock(desc, flags);
return ret;
}
EXPORT_SYMBOL(irq_set_irq_type);
/**
* irq_set_handler_data - set irq handler data for an irq
* @irq: Interrupt number
* @data: Pointer to interrupt specific data
*
* Set the hardware irq controller data for an irq
*/
int irq_set_handler_data(unsigned int irq, void *data)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
desc->irq_common_data.handler_data = data;
irq_put_desc_unlock(desc, flags);
return 0;
}
EXPORT_SYMBOL(irq_set_handler_data);
/**
* irq_set_msi_desc_off - set MSI descriptor data for an irq at offset
* @irq_base: Interrupt number base
* @irq_offset: Interrupt number offset
* @entry: Pointer to MSI descriptor data
*
* Set the MSI descriptor entry for an irq at offset
*/
int irq_set_msi_desc_off(unsigned int irq_base, unsigned int irq_offset,
struct msi_desc *entry)
{
unsigned long flags;
struct irq_desc *desc = irq_get_desc_lock(irq_base + irq_offset, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
desc->irq_common_data.msi_desc = entry;
if (entry && !irq_offset)
entry->irq = irq_base;
irq_put_desc_unlock(desc, flags);
return 0;
}
/**
* irq_set_msi_desc - set MSI descriptor data for an irq
* @irq: Interrupt number
* @entry: Pointer to MSI descriptor data
*
* Set the MSI descriptor entry for an irq
*/
int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry)
{
return irq_set_msi_desc_off(irq, 0, entry);
}
/**
* irq_set_chip_data - set irq chip data for an irq
* @irq: Interrupt number
* @data: Pointer to chip specific data
*
* Set the hardware irq chip data for an irq
*/
int irq_set_chip_data(unsigned int irq, void *data)
{
unsigned long flags;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
desc->irq_data.chip_data = data;
irq_put_desc_unlock(desc, flags);
return 0;
}
EXPORT_SYMBOL(irq_set_chip_data);
struct irq_data *irq_get_irq_data(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
return desc ? &desc->irq_data : NULL;
}
EXPORT_SYMBOL_GPL(irq_get_irq_data);
static void irq_state_clr_disabled(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_DISABLED);
}
static void irq_state_clr_masked(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_MASKED);
}
static void irq_state_clr_started(struct irq_desc *desc)
{
irqd_clear(&desc->irq_data, IRQD_IRQ_STARTED);
}
static void irq_state_set_started(struct irq_desc *desc)
{
irqd_set(&desc->irq_data, IRQD_IRQ_STARTED);
}
enum {
IRQ_STARTUP_NORMAL,
IRQ_STARTUP_MANAGED,
IRQ_STARTUP_ABORT,
};
#ifdef CONFIG_SMP
static int
__irq_startup_managed(struct irq_desc *desc, struct cpumask *aff, bool force)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
if (!irqd_affinity_is_managed(d))
return IRQ_STARTUP_NORMAL;
irqd_clr_managed_shutdown(d);
if (cpumask_any_and(aff, cpu_online_mask) >= nr_cpu_ids) {
/*
* Catch code which fiddles with enable_irq() on a managed
* and potentially shutdown IRQ. Chained interrupt
* installment or irq auto probing should not happen on
* managed irqs either.
*/
if (WARN_ON_ONCE(force))
return IRQ_STARTUP_ABORT;
/*
* The interrupt was requested, but there is no online CPU
* in it's affinity mask. Put it into managed shutdown
* state and let the cpu hotplug mechanism start it up once
* a CPU in the mask becomes available.
*/
return IRQ_STARTUP_ABORT;
}
/*
* Managed interrupts have reserved resources, so this should not
* happen.
*/
if (WARN_ON(irq_domain_activate_irq(d, false)))
return IRQ_STARTUP_ABORT;
return IRQ_STARTUP_MANAGED;
}
#else
static __always_inline int
__irq_startup_managed(struct irq_desc *desc, struct cpumask *aff, bool force)
{
return IRQ_STARTUP_NORMAL;
}
#endif
static int __irq_startup(struct irq_desc *desc)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
int ret = 0;
/* Warn if this interrupt is not activated but try nevertheless */
WARN_ON_ONCE(!irqd_is_activated(d));
if (d->chip->irq_startup) {
ret = d->chip->irq_startup(d);
irq_state_clr_disabled(desc);
irq_state_clr_masked(desc);
} else {
irq_enable(desc);
}
irq_state_set_started(desc);
return ret;
}
int irq_startup(struct irq_desc *desc, bool resend, bool force)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
struct cpumask *aff = irq_data_get_affinity_mask(d);
int ret = 0;
desc->depth = 0;
if (irqd_is_started(d)) {
irq_enable(desc);
} else {
switch (__irq_startup_managed(desc, aff, force)) {
case IRQ_STARTUP_NORMAL:
ret = __irq_startup(desc);
irq_setup_affinity(desc);
break;
case IRQ_STARTUP_MANAGED:
genirq/cpuhotplug: Enforce affinity setting on startup of managed irqs Managed interrupts can end up in a stale state on CPU hotplug. If the interrupt is not targeting a single CPU, i.e. the affinity mask spawns multiple CPUs then the following can happen: After boot: dstate: 0x01601200 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 24 pending: 0 After offlining CPU 31 - 24 dstate: 0x01a31000 IRQD_IRQ_DISABLED IRQD_IRQ_MASKED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_AFFINITY_MANAGED IRQD_MANAGED_SHUTDOWN node: 0 affinity: 24-31 effectiv: 24 pending: 0 Now CPU 25 gets onlined again, so it should get the effective interrupt affinity for this interruopt, but due to the x86 interrupt affinity setter restrictions this ends up after restarting the interrupt with: dstate: 0x01601300 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_SETAFFINITY_PENDING IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 24 pending: 24-31 So the interrupt is still affine to CPU 24, which was the last CPU to go offline of that affinity set and the move to an online CPU within 24-31, in this case 25, is pending. This mechanism is x86/ia64 specific as those architectures cannot move interrupts from thread context and do this when an interrupt is actually handled. So the move is set to pending. Whats worse is that offlining CPU 25 again results in: dstate: 0x01601300 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_SET IRQD_SETAFFINITY_PENDING IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 24 pending: 24-31 This means the interrupt has not been shut down, because the outgoing CPU is not in the effective affinity mask, but of course nothing notices that the effective affinity mask is pointing at an offline CPU. In the case of restarting a managed interrupt the move restriction does not apply, so the affinity setting can be made unconditional. This needs to be done _before_ the interrupt is started up as otherwise the condition for moving it from thread context would not longer be fulfilled. With that change applied onlining CPU 25 after offlining 31-24 results in: dstate: 0x01600200 IRQD_ACTIVATED IRQD_IRQ_STARTED IRQD_SINGLE_TARGET IRQD_AFFINITY_MANAGED node: 0 affinity: 24-31 effectiv: 25 pending: And after offlining CPU 25: dstate: 0x01a30000 IRQD_IRQ_DISABLED IRQD_IRQ_MASKED IRQD_SINGLE_TARGET IRQD_AFFINITY_MANAGED IRQD_MANAGED_SHUTDOWN node: 0 affinity: 24-31 effectiv: 25 pending: which is the correct and expected result. Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()") Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: axboe@kernel.dk Cc: linux-scsi@vger.kernel.org Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: mpe@ellerman.id.au Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: keith.busch@intel.com Cc: peterz@infradead.org Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
2017-10-04 22:07:38 +03:00
irq_do_set_affinity(d, aff, false);
ret = __irq_startup(desc);
break;
case IRQ_STARTUP_ABORT:
irqd_set_managed_shutdown(d);
return 0;
}
}
if (resend)
check_irq_resend(desc);
return ret;
}
int irq_activate(struct irq_desc *desc)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
if (!irqd_affinity_is_managed(d))
return irq_domain_activate_irq(d, false);
return 0;
}
int irq_activate_and_startup(struct irq_desc *desc, bool resend)
{
if (WARN_ON(irq_activate(desc)))
return 0;
return irq_startup(desc, resend, IRQ_START_FORCE);
}
static void __irq_disable(struct irq_desc *desc, bool mask);
void irq_shutdown(struct irq_desc *desc)
{
if (irqd_is_started(&desc->irq_data)) {
desc->depth = 1;
if (desc->irq_data.chip->irq_shutdown) {
desc->irq_data.chip->irq_shutdown(&desc->irq_data);
irq_state_set_disabled(desc);
irq_state_set_masked(desc);
} else {
__irq_disable(desc, true);
}
irq_state_clr_started(desc);
}
/*
* This must be called even if the interrupt was never started up,
* because the activation can happen before the interrupt is
* available for request/startup. It has it's own state tracking so
* it's safe to call it unconditionally.
*/
irqdomain: Introduce new interfaces to support hierarchy irqdomains We plan to use hierarchy irqdomain to suppport CPU vector assignment, interrupt remapping controller, IO-APIC controller, MSI interrupt and hypertransport interrupt etc on x86 platforms. So extend irqdomain interfaces to support hierarchy irqdomain. There are already many clients of current irqdomain interfaces. To minimize the changes, we choose to introduce new version 2 interfaces to support hierarchy instead of extending existing irqdomain interfaces. According to Thomas's suggestion, the most important design decision is to build hierarchy struct irq_data to support hierarchy irqdomain, so hierarchy irqdomain related data could be saved in struct irq_data. With support of hierarchy irq_data, we could also support stacked irq_chips. This is most useful in case of set_affinity(). The new hierarchy irqdomain introduces following interfaces: 1) irq_domain_alloc_irqs()/irq_domain_free_irqs(): allocate/release IRQ and related resources. 2) __irq_domain_alloc_irqs(): a special version to support legacy IRQs. 3) irq_domain_activate_irq()/irq_domain_deactivate_irq(): program interrupt controllers to activate/deactivate interrupt. There are also several help functions to ease irqdomain implemenations: 1) irq_domain_get_irq_data(): get irq_data associated with a specific irqdomain. 2) irq_domain_set_hwirq_and_chip(): save irqdomain specific data into irq_data. 3) irq_domain_alloc_irqs_parent()/irq_domain_free_irqs_parent(): invoke parent irqdomain's alloc/free callbacks. We also changed irq_startup()/irq_shutdown() to invoke irq_domain_activate_irq()/irq_domain_deactivate_irq() to program interrupt controller when start/stop interrupts. [ tglx: Folded parts of the later patch series in ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-06 17:20:14 +03:00
irq_domain_deactivate_irq(&desc->irq_data);
}
void irq_enable(struct irq_desc *desc)
{
if (!irqd_irq_disabled(&desc->irq_data)) {
unmask_irq(desc);
} else {
irq_state_clr_disabled(desc);
if (desc->irq_data.chip->irq_enable) {
desc->irq_data.chip->irq_enable(&desc->irq_data);
irq_state_clr_masked(desc);
} else {
unmask_irq(desc);
}
}
}
static void __irq_disable(struct irq_desc *desc, bool mask)
{
if (irqd_irq_disabled(&desc->irq_data)) {
if (mask)
mask_irq(desc);
} else {
irq_state_set_disabled(desc);
if (desc->irq_data.chip->irq_disable) {
desc->irq_data.chip->irq_disable(&desc->irq_data);
irq_state_set_masked(desc);
} else if (mask) {
mask_irq(desc);
}
}
}
/**
* irq_disable - Mark interrupt disabled
* @desc: irq descriptor which should be disabled
*
* If the chip does not implement the irq_disable callback, we
* use a lazy disable approach. That means we mark the interrupt
* disabled, but leave the hardware unmasked. That's an
* optimization because we avoid the hardware access for the
* common case where no interrupt happens after we marked it
* disabled. If an interrupt happens, then the interrupt flow
* handler masks the line at the hardware level and marks it
* pending.
*
* If the interrupt chip does not implement the irq_disable callback,
* a driver can disable the lazy approach for a particular irq line by
* calling 'irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY)'. This can
* be used for devices which cannot disable the interrupt at the
* device level under certain circumstances and have to use
* disable_irq[_nosync] instead.
*/
void irq_disable(struct irq_desc *desc)
{
__irq_disable(desc, irq_settings_disable_unlazy(desc));
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)
{
if (desc->irq_data.chip->irq_enable)
desc->irq_data.chip->irq_enable(&desc->irq_data);
else
desc->irq_data.chip->irq_unmask(&desc->irq_data);
cpumask_set_cpu(cpu, desc->percpu_enabled);
}
void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu)
{
if (desc->irq_data.chip->irq_disable)
desc->irq_data.chip->irq_disable(&desc->irq_data);
else
desc->irq_data.chip->irq_mask(&desc->irq_data);
cpumask_clear_cpu(cpu, desc->percpu_enabled);
}
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack) {
desc->irq_data.chip->irq_mask_ack(&desc->irq_data);
irq_state_set_masked(desc);
} else {
mask_irq(desc);
if (desc->irq_data.chip->irq_ack)
desc->irq_data.chip->irq_ack(&desc->irq_data);
}
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-09 21:45:54 +03:00
}
void mask_irq(struct irq_desc *desc)
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-09 21:45:54 +03:00
{
if (irqd_irq_masked(&desc->irq_data))
return;
if (desc->irq_data.chip->irq_mask) {
desc->irq_data.chip->irq_mask(&desc->irq_data);
irq_state_set_masked(desc);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-09 21:45:54 +03:00
}
}
void unmask_irq(struct irq_desc *desc)
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-09 21:45:54 +03:00
{
if (!irqd_irq_masked(&desc->irq_data))
return;
if (desc->irq_data.chip->irq_unmask) {
desc->irq_data.chip->irq_unmask(&desc->irq_data);
irq_state_clr_masked(desc);
genirq: Prevent oneshot irq thread race Lars-Peter pointed out that the oneshot threaded interrupt handler code has the following race: CPU0 CPU1 hande_level_irq(irq X) mask_ack_irq(irq X) handle_IRQ_event(irq X) wake_up(thread_handler) thread handler(irq X) runs finalize_oneshot(irq X) does not unmask due to !(desc->status & IRQ_MASKED) return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This leaves the interrupt line masked forever. The reason for this is the inconsistent handling of the IRQ_MASKED flag. Instead of setting it in the mask function the oneshot support sets the flag after waking up the irq thread. The solution for this is to set/clear the IRQ_MASKED status whenever we mask/unmask an interrupt line. That's the easy part, but that cleanup opens another race: CPU0 CPU1 hande_level_irq(irq) mask_ack_irq(irq) handle_IRQ_event(irq) wake_up(thread_handler) thread handler(irq) runs finalize_oneshot_irq(irq) unmask(irq) irq triggers again handle_level_irq(irq) mask_ack_irq(irq) return from irq due to IRQ_INPROGRESS return from irq does not unmask due to (desc->status & IRQ_ONESHOT) This requires that we synchronize finalize_oneshot_irq() with the primary handler. If IRQ_INPROGESS is set we wait until the primary handler on the other CPU has returned before unmasking the interrupt line again. We probably have never seen that problem because it does not happen on UP and on SMP the irqbalancer protects us by pinning the primary handler and the thread to the same CPU. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
2010-03-09 21:45:54 +03:00
}
}
void unmask_threaded_irq(struct irq_desc *desc)
{
struct irq_chip *chip = desc->irq_data.chip;
if (chip->flags & IRQCHIP_EOI_THREADED)
chip->irq_eoi(&desc->irq_data);
unmask_irq(desc);
}
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
/*
* handle_nested_irq - Handle a nested irq from a irq thread
* @irq: the interrupt number
*
* Handle interrupts which are nested into a threaded interrupt
* handler. The handler function is called inside the calling
* threads context.
*/
void handle_nested_irq(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action;
irqreturn_t action_ret;
might_sleep();
raw_spin_lock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
action = desc->action;
if (unlikely(!action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
goto out_unlock;
}
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
kstat_incr_irqs_this_cpu(desc);
irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
raw_spin_unlock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
action_ret = IRQ_NONE;
for_each_action_of_desc(desc, action)
action_ret |= action->thread_fn(action->irq, action->dev_id);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
if (!noirqdebug)
note_interrupt(desc, action_ret);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
raw_spin_lock_irq(&desc->lock);
irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
out_unlock:
raw_spin_unlock_irq(&desc->lock);
genirq: Support nested threaded irq handling Interrupt chips which are behind a slow bus (i2c, spi ...) and demultiplex other interrupt sources need to run their interrupt handler in a thread. The demultiplexed interrupt handlers need to run in thread context as well and need to finish before the demux handler thread can reenable the interrupt line. So the easiest way is to run the sub device handlers in the context of the demultiplexing handler thread. To avoid that a separate thread is created for the subdevices the function set_nested_irq_thread() is provided which sets the IRQ_NESTED_THREAD flag in the interrupt descriptor. A driver which calls request_threaded_irq() must not be aware of the fact that the threaded handler is called in the context of the demultiplexing handler thread. The setup code checks the IRQ_NESTED_THREAD flag which was set from the irq chip setup code and does not setup a separate thread for the interrupt. The primary function which is provided by the device driver is replaced by an internal dummy function which warns when it is called. For the demultiplexing handler a helper function handle_nested_irq() is provided which calls the demux interrupt thread function in the context of the caller and does the proper interrupt accounting and takes the interrupt disabled status of the demultiplexed subdevice into account. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 15:21:38 +04:00
}
EXPORT_SYMBOL_GPL(handle_nested_irq);
static bool irq_check_poll(struct irq_desc *desc)
{
if (!(desc->istate & IRQS_POLL_INPROGRESS))
return false;
return irq_wait_for_poll(desc);
}
static bool irq_may_run(struct irq_desc *desc)
{
unsigned int mask = IRQD_IRQ_INPROGRESS | IRQD_WAKEUP_ARMED;
/*
* If the interrupt is not in progress and is not an armed
* wakeup interrupt, proceed.
*/
if (!irqd_has_set(&desc->irq_data, mask))
return true;
/*
* If the interrupt is an armed wakeup source, mark it pending
* and suspended, disable it and notify the pm core about the
* event.
*/
if (irq_pm_check_wakeup(desc))
return false;
/*
* Handle a potential concurrent poll on a different core.
*/
return irq_check_poll(desc);
}
/**
* handle_simple_irq - Simple and software-decoded IRQs.
* @desc: the interrupt description structure for this irq
*
* Simple interrupts are either sent from a demultiplexing interrupt
* handler or come from hardware, where no interrupt hardware control
* is necessary.
*
* Note: The caller is expected to handle the ack, clear, mask and
* unmask issues if necessary.
*/
void handle_simple_irq(struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
if (!irq_may_run(desc))
goto out_unlock;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
goto out_unlock;
}
kstat_incr_irqs_this_cpu(desc);
handle_irq_event(desc);
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_simple_irq);
/**
* handle_untracked_irq - Simple and software-decoded IRQs.
* @desc: the interrupt description structure for this irq
*
* Untracked interrupts are sent from a demultiplexing interrupt
* handler when the demultiplexer does not know which device it its
* multiplexed irq domain generated the interrupt. IRQ's handled
* through here are not subjected to stats tracking, randomness, or
* spurious interrupt detection.
*
* Note: Like handle_simple_irq, the caller is expected to handle
* the ack, clear, mask and unmask issues if necessary.
*/
void handle_untracked_irq(struct irq_desc *desc)
{
unsigned int flags = 0;
raw_spin_lock(&desc->lock);
if (!irq_may_run(desc))
goto out_unlock;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
goto out_unlock;
}
desc->istate &= ~IRQS_PENDING;
irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
raw_spin_unlock(&desc->lock);
__handle_irq_event_percpu(desc, &flags);
raw_spin_lock(&desc->lock);
irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_untracked_irq);
/*
* Called unconditionally from handle_level_irq() and only for oneshot
* interrupts from handle_fasteoi_irq()
*/
static void cond_unmask_irq(struct irq_desc *desc)
{
/*
* We need to unmask in the following cases:
* - Standard level irq (IRQF_ONESHOT is not set)
* - Oneshot irq which did not wake the thread (caused by a
* spurious interrupt or a primary handler handling it
* completely).
*/
if (!irqd_irq_disabled(&desc->irq_data) &&
irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot)
unmask_irq(desc);
}
/**
* handle_level_irq - Level type irq handler
* @desc: the interrupt description structure for this irq
*
* Level type interrupts are active as long as the hardware line has
* the active level. This may require to mask the interrupt and unmask
* it after the associated handler has acknowledged the device, so the
* interrupt line is back to inactive.
*/
void handle_level_irq(struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
mask_ack_irq(desc);
if (!irq_may_run(desc))
goto out_unlock;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
/*
* If its disabled or no action available
* keep it masked and get out of here
*/
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 13:14:34 +04:00
goto out_unlock;
}
kstat_incr_irqs_this_cpu(desc);
handle_irq_event(desc);
genirq: Add oneshot support For threaded interrupt handlers we expect the hard interrupt handler part to mask the interrupt on the originating device. The interrupt line itself is reenabled after the hard interrupt handler has executed. This requires access to the originating device from hard interrupt context which is not always possible. There are devices which can only be accessed via a bus (i2c, spi, ...). The bus access requires thread context. For such devices we need to keep the interrupt line masked until the threaded handler has executed. Add a new flag IRQF_ONESHOT which allows drivers to request that the interrupt is not unmasked after the hard interrupt context handler has been executed and the thread has been woken. The interrupt line is unmasked after the thread handler function has been executed. Note that for now IRQF_ONESHOT cannot be used with IRQF_SHARED to avoid complex accounting mechanisms. For oneshot interrupts the primary handler simply returns IRQ_WAKE_THREAD and does nothing else. A generic implementation irq_default_primary_handler() is provided to avoid useless copies all over the place. It is automatically installed when request_threaded_irq() is called with handler=NULL and thread_fn!=NULL. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 14:17:22 +04:00
cond_unmask_irq(desc);
[PATCH] genirq core: fix handle_level_irq() while porting the -rt tree to 2.6.18-rc7 i noticed the following screaming-IRQ scenario on an SMP system: 2274 0Dn.:1 0.001ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.010ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.020ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.029ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.039ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.048ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.058ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.068ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.077ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.087ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) 2274 0Dn.:1 0.097ms: do_IRQ+0xc/0x103 <= (ret_from_intr+0x0/0xf) as it turns out, the bug is caused by handle_level_irq(), which if it races with another CPU already handling this IRQ, it _unmasks_ the IRQ line on the way out. This is not how 2.6.17 works, and we introduced this bug in one of the early genirq cleanups right before it went into -mm. (the bug was not in the genirq patchset for a long time, and we didnt notice the bug due to the lack of -rt rebase to the new genirq code. -rt, and hardirq-preemption in particular opens up such races much wider than anything else.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-19 13:14:34 +04:00
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_level_irq);
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
static inline void preflow_handler(struct irq_desc *desc)
{
if (desc->preflow_handler)
desc->preflow_handler(&desc->irq_data);
}
#else
static inline void preflow_handler(struct irq_desc *desc) { }
#endif
static void cond_unmask_eoi_irq(struct irq_desc *desc, struct irq_chip *chip)
{
if (!(desc->istate & IRQS_ONESHOT)) {
chip->irq_eoi(&desc->irq_data);
return;
}
/*
* We need to unmask in the following cases:
* - Oneshot irq which did not wake the thread (caused by a
* spurious interrupt or a primary handler handling it
* completely).
*/
if (!irqd_irq_disabled(&desc->irq_data) &&
irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot) {
chip->irq_eoi(&desc->irq_data);
unmask_irq(desc);
} else if (!(chip->flags & IRQCHIP_EOI_THREADED)) {
chip->irq_eoi(&desc->irq_data);
}
}
/**
* handle_fasteoi_irq - irq handler for transparent controllers
* @desc: the interrupt description structure for this irq
*
* Only a single callback will be issued to the chip: an ->eoi()
* call when the interrupt has been serviced. This enables support
* for modern forms of interrupt handlers, which handle the flow
* details in hardware, transparently.
*/
void handle_fasteoi_irq(struct irq_desc *desc)
{
struct irq_chip *chip = desc->irq_data.chip;
raw_spin_lock(&desc->lock);
if (!irq_may_run(desc))
goto out;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
/*
* If its disabled or no action available
* then mask it and get out of here:
*/
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
mask_irq(desc);
goto out;
}
kstat_incr_irqs_this_cpu(desc);
if (desc->istate & IRQS_ONESHOT)
mask_irq(desc);
preflow_handler(desc);
handle_irq_event(desc);
cond_unmask_eoi_irq(desc, chip);
raw_spin_unlock(&desc->lock);
return;
out:
if (!(chip->flags & IRQCHIP_EOI_IF_HANDLED))
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_fasteoi_irq);
/**
* handle_edge_irq - edge type IRQ handler
* @desc: the interrupt description structure for this irq
*
* Interrupt occures on the falling and/or rising edge of a hardware
* signal. The occurrence is latched into the irq controller hardware
* and must be acked in order to be reenabled. After the ack another
* interrupt can happen on the same source even before the first one
* is handled by the associated event handler. If this happens it
* might be necessary to disable (mask) the interrupt depending on the
* controller hardware. This requires to reenable the interrupt inside
* of the loop which handles the interrupts which have arrived while
* the handler was running. If all pending interrupts are handled, the
* loop is left.
*/
void handle_edge_irq(struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
if (!irq_may_run(desc)) {
desc->istate |= IRQS_PENDING;
mask_ack_irq(desc);
goto out_unlock;
}
/*
* If its disabled or no action available then mask it and get
* out of here.
*/
if (irqd_irq_disabled(&desc->irq_data) || !desc->action) {
desc->istate |= IRQS_PENDING;
mask_ack_irq(desc);
goto out_unlock;
}
kstat_incr_irqs_this_cpu(desc);
/* Start handling the irq */
desc->irq_data.chip->irq_ack(&desc->irq_data);
do {
if (unlikely(!desc->action)) {
mask_irq(desc);
goto out_unlock;
}
/*
* When another irq arrived while we were handling
* one, we could have masked the irq.
* Renable it, if it was not disabled in meantime.
*/
if (unlikely(desc->istate & IRQS_PENDING)) {
if (!irqd_irq_disabled(&desc->irq_data) &&
irqd_irq_masked(&desc->irq_data))
unmask_irq(desc);
}
handle_irq_event(desc);
} while ((desc->istate & IRQS_PENDING) &&
!irqd_irq_disabled(&desc->irq_data));
out_unlock:
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL(handle_edge_irq);
#ifdef CONFIG_IRQ_EDGE_EOI_HANDLER
/**
* handle_edge_eoi_irq - edge eoi type IRQ handler
* @desc: the interrupt description structure for this irq
*
* Similar as the above handle_edge_irq, but using eoi and w/o the
* mask/unmask logic.
*/
void handle_edge_eoi_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
raw_spin_lock(&desc->lock);
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
if (!irq_may_run(desc)) {
desc->istate |= IRQS_PENDING;
goto out_eoi;
}
/*
* If its disabled or no action available then mask it and get
* out of here.
*/
if (irqd_irq_disabled(&desc->irq_data) || !desc->action) {
desc->istate |= IRQS_PENDING;
goto out_eoi;
}
kstat_incr_irqs_this_cpu(desc);
do {
if (unlikely(!desc->action))
goto out_eoi;
handle_irq_event(desc);
} while ((desc->istate & IRQS_PENDING) &&
!irqd_irq_disabled(&desc->irq_data));
out_eoi:
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
#endif
/**
* handle_percpu_irq - Per CPU local irq handler
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements
*/
void handle_percpu_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
kstat_incr_irqs_this_cpu(desc);
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
handle_irq_event_percpu(desc);
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
/**
* handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
* @desc: the interrupt description structure for this irq
*
* Per CPU interrupts on SMP machines without locking requirements. Same as
* handle_percpu_irq() above but with the following extras:
*
* action->percpu_dev_id is a pointer to percpu variables which
* contain the real device id for the cpu on which this handler is
* called
*/
void handle_percpu_devid_irq(struct irq_desc *desc)
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct irqaction *action = desc->action;
unsigned int irq = irq_desc_get_irq(desc);
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
irqreturn_t res;
kstat_incr_irqs_this_cpu(desc);
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
if (chip->irq_ack)
chip->irq_ack(&desc->irq_data);
if (likely(action)) {
trace_irq_handler_entry(irq, action);
res = action->handler(irq, raw_cpu_ptr(action->percpu_dev_id));
trace_irq_handler_exit(irq, action, res);
} else {
unsigned int cpu = smp_processor_id();
bool enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
if (enabled)
irq_percpu_disable(desc, cpu);
pr_err_once("Spurious%s percpu IRQ%u on CPU%u\n",
enabled ? " and unmasked" : "", irq, cpu);
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
}
static void
__irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle,
int is_chained, const char *name)
{
if (!handle) {
handle = handle_bad_irq;
} else {
struct irq_data *irq_data = &desc->irq_data;
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
/*
* With hierarchical domains we might run into a
* situation where the outermost chip is not yet set
* up, but the inner chips are there. Instead of
* bailing we install the handler, but obviously we
* cannot enable/startup the interrupt at this point.
*/
while (irq_data) {
if (irq_data->chip != &no_irq_chip)
break;
/*
* Bail out if the outer chip is not set up
* and the interrrupt supposed to be started
* right away.
*/
if (WARN_ON(is_chained))
return;
/* Try the parent */
irq_data = irq_data->parent_data;
}
#endif
if (WARN_ON(!irq_data || irq_data->chip == &no_irq_chip))
return;
}
/* Uninstall? */
if (handle == handle_bad_irq) {
if (desc->irq_data.chip != &no_irq_chip)
mask_ack_irq(desc);
irq_state_set_disabled(desc);
genirq: Allow migration of chained interrupts by installing default action When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-05 13:12:15 +03:00
if (is_chained)
desc->action = NULL;
desc->depth = 1;
}
desc->handle_irq = handle;
desc->name = name;
if (handle != handle_bad_irq && is_chained) {
unsigned int type = irqd_get_trigger_type(&desc->irq_data);
/*
* We're about to start this interrupt immediately,
* hence the need to set the trigger configuration.
* But the .set_type callback may have overridden the
* flow handler, ignoring that we're dealing with a
* chained interrupt. Reset it immediately because we
* do know better.
*/
if (type != IRQ_TYPE_NONE) {
__irq_set_trigger(desc, type);
desc->handle_irq = handle;
}
irq_settings_set_noprobe(desc);
irq_settings_set_norequest(desc);
irq_settings_set_nothread(desc);
genirq: Allow migration of chained interrupts by installing default action When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-05 13:12:15 +03:00
desc->action = &chained_action;
irq_activate_and_startup(desc, IRQ_RESEND);
}
}
void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
{
unsigned long flags;
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, 0);
if (!desc)
return;
__irq_do_set_handler(desc, handle, is_chained, name);
irq_put_desc_busunlock(desc, flags);
}
EXPORT_SYMBOL_GPL(__irq_set_handler);
void
irq_set_chained_handler_and_data(unsigned int irq, irq_flow_handler_t handle,
void *data)
{
unsigned long flags;
struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, 0);
if (!desc)
return;
desc->irq_common_data.handler_data = data;
__irq_do_set_handler(desc, handle, 1, NULL);
irq_put_desc_busunlock(desc, flags);
}
EXPORT_SYMBOL_GPL(irq_set_chained_handler_and_data);
void
irq_set_chip_and_handler_name(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handle, const char *name)
{
irq_set_chip(irq, chip);
__irq_set_handler(irq, handle, 0, name);
}
EXPORT_SYMBOL_GPL(irq_set_chip_and_handler_name);
void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
{
unsigned long flags, trigger, tmp;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 20:03:06 +04:00
struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return;
/*
* Warn when a driver sets the no autoenable flag on an already
* active interrupt.
*/
WARN_ON_ONCE(!desc->depth && (set & _IRQ_NOAUTOEN));
irq_settings_clr_and_set(desc, clr, set);
trigger = irqd_get_trigger_type(&desc->irq_data);
irqd_clear(&desc->irq_data, IRQD_NO_BALANCING | IRQD_PER_CPU |
IRQD_TRIGGER_MASK | IRQD_LEVEL | IRQD_MOVE_PCNTXT);
if (irq_settings_has_no_balance_set(desc))
irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
if (irq_settings_is_per_cpu(desc))
irqd_set(&desc->irq_data, IRQD_PER_CPU);
if (irq_settings_can_move_pcntxt(desc))
irqd_set(&desc->irq_data, IRQD_MOVE_PCNTXT);
if (irq_settings_is_level(desc))
irqd_set(&desc->irq_data, IRQD_LEVEL);
tmp = irq_settings_get_trigger_mask(desc);
if (tmp != IRQ_TYPE_NONE)
trigger = tmp;
irqd_set(&desc->irq_data, trigger);
irq_put_desc_unlock(desc, flags);
}
EXPORT_SYMBOL_GPL(irq_modify_status);
/**
* irq_cpu_online - Invoke all irq_cpu_online functions.
*
* Iterate through all irqs and invoke the chip.irq_cpu_online()
* for each.
*/
void irq_cpu_online(void)
{
struct irq_desc *desc;
struct irq_chip *chip;
unsigned long flags;
unsigned int irq;
for_each_active_irq(irq) {
desc = irq_to_desc(irq);
if (!desc)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
chip = irq_data_get_irq_chip(&desc->irq_data);
if (chip && chip->irq_cpu_online &&
(!(chip->flags & IRQCHIP_ONOFFLINE_ENABLED) ||
!irqd_irq_disabled(&desc->irq_data)))
chip->irq_cpu_online(&desc->irq_data);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}
/**
* irq_cpu_offline - Invoke all irq_cpu_offline functions.
*
* Iterate through all irqs and invoke the chip.irq_cpu_offline()
* for each.
*/
void irq_cpu_offline(void)
{
struct irq_desc *desc;
struct irq_chip *chip;
unsigned long flags;
unsigned int irq;
for_each_active_irq(irq) {
desc = irq_to_desc(irq);
if (!desc)
continue;
raw_spin_lock_irqsave(&desc->lock, flags);
chip = irq_data_get_irq_chip(&desc->irq_data);
if (chip && chip->irq_cpu_offline &&
(!(chip->flags & IRQCHIP_ONOFFLINE_ENABLED) ||
!irqd_irq_disabled(&desc->irq_data)))
chip->irq_cpu_offline(&desc->irq_data);
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
}
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
#ifdef CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS
/**
* handle_fasteoi_ack_irq - irq handler for edge hierarchy
* stacked on transparent controllers
*
* @desc: the interrupt description structure for this irq
*
* Like handle_fasteoi_irq(), but for use with hierarchy where
* the irq_chip also needs to have its ->irq_ack() function
* called.
*/
void handle_fasteoi_ack_irq(struct irq_desc *desc)
{
struct irq_chip *chip = desc->irq_data.chip;
raw_spin_lock(&desc->lock);
if (!irq_may_run(desc))
goto out;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
/*
* If its disabled or no action available
* then mask it and get out of here:
*/
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
mask_irq(desc);
goto out;
}
kstat_incr_irqs_this_cpu(desc);
if (desc->istate & IRQS_ONESHOT)
mask_irq(desc);
/* Start handling the irq */
desc->irq_data.chip->irq_ack(&desc->irq_data);
preflow_handler(desc);
handle_irq_event(desc);
cond_unmask_eoi_irq(desc, chip);
raw_spin_unlock(&desc->lock);
return;
out:
if (!(chip->flags & IRQCHIP_EOI_IF_HANDLED))
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_fasteoi_ack_irq);
/**
* handle_fasteoi_mask_irq - irq handler for level hierarchy
* stacked on transparent controllers
*
* @desc: the interrupt description structure for this irq
*
* Like handle_fasteoi_irq(), but for use with hierarchy where
* the irq_chip also needs to have its ->irq_mask_ack() function
* called.
*/
void handle_fasteoi_mask_irq(struct irq_desc *desc)
{
struct irq_chip *chip = desc->irq_data.chip;
raw_spin_lock(&desc->lock);
mask_ack_irq(desc);
if (!irq_may_run(desc))
goto out;
desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
/*
* If its disabled or no action available
* then mask it and get out of here:
*/
if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
desc->istate |= IRQS_PENDING;
mask_irq(desc);
goto out;
}
kstat_incr_irqs_this_cpu(desc);
if (desc->istate & IRQS_ONESHOT)
mask_irq(desc);
preflow_handler(desc);
handle_irq_event(desc);
cond_unmask_eoi_irq(desc, chip);
raw_spin_unlock(&desc->lock);
return;
out:
if (!(chip->flags & IRQCHIP_EOI_IF_HANDLED))
chip->irq_eoi(&desc->irq_data);
raw_spin_unlock(&desc->lock);
}
EXPORT_SYMBOL_GPL(handle_fasteoi_mask_irq);
#endif /* CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS */
/**
* irq_chip_enable_parent - Enable the parent interrupt (defaults to unmask if
* NULL)
* @data: Pointer to interrupt specific data
*/
void irq_chip_enable_parent(struct irq_data *data)
{
data = data->parent_data;
if (data->chip->irq_enable)
data->chip->irq_enable(data);
else
data->chip->irq_unmask(data);
}
EXPORT_SYMBOL_GPL(irq_chip_enable_parent);
/**
* irq_chip_disable_parent - Disable the parent interrupt (defaults to mask if
* NULL)
* @data: Pointer to interrupt specific data
*/
void irq_chip_disable_parent(struct irq_data *data)
{
data = data->parent_data;
if (data->chip->irq_disable)
data->chip->irq_disable(data);
else
data->chip->irq_mask(data);
}
EXPORT_SYMBOL_GPL(irq_chip_disable_parent);
/**
* irq_chip_ack_parent - Acknowledge the parent interrupt
* @data: Pointer to interrupt specific data
*/
void irq_chip_ack_parent(struct irq_data *data)
{
data = data->parent_data;
data->chip->irq_ack(data);
}
EXPORT_SYMBOL_GPL(irq_chip_ack_parent);
/**
* irq_chip_mask_parent - Mask the parent interrupt
* @data: Pointer to interrupt specific data
*/
void irq_chip_mask_parent(struct irq_data *data)
{
data = data->parent_data;
data->chip->irq_mask(data);
}
EXPORT_SYMBOL_GPL(irq_chip_mask_parent);
/**
* irq_chip_unmask_parent - Unmask the parent interrupt
* @data: Pointer to interrupt specific data
*/
void irq_chip_unmask_parent(struct irq_data *data)
{
data = data->parent_data;
data->chip->irq_unmask(data);
}
EXPORT_SYMBOL_GPL(irq_chip_unmask_parent);
/**
* irq_chip_eoi_parent - Invoke EOI on the parent interrupt
* @data: Pointer to interrupt specific data
*/
void irq_chip_eoi_parent(struct irq_data *data)
{
data = data->parent_data;
data->chip->irq_eoi(data);
}
EXPORT_SYMBOL_GPL(irq_chip_eoi_parent);
/**
* irq_chip_set_affinity_parent - Set affinity on the parent interrupt
* @data: Pointer to interrupt specific data
* @dest: The affinity mask to set
* @force: Flag to enforce setting (disable online checks)
*
* Conditinal, as the underlying parent chip might not implement it.
*/
int irq_chip_set_affinity_parent(struct irq_data *data,
const struct cpumask *dest, bool force)
{
data = data->parent_data;
if (data->chip->irq_set_affinity)
return data->chip->irq_set_affinity(data, dest, force);
return -ENOSYS;
}
EXPORT_SYMBOL_GPL(irq_chip_set_affinity_parent);
/**
* irq_chip_set_type_parent - Set IRQ type on the parent interrupt
* @data: Pointer to interrupt specific data
* @type: IRQ_TYPE_{LEVEL,EDGE}_* value - see include/linux/irq.h
*
* Conditional, as the underlying parent chip might not implement it.
*/
int irq_chip_set_type_parent(struct irq_data *data, unsigned int type)
{
data = data->parent_data;
if (data->chip->irq_set_type)
return data->chip->irq_set_type(data, type);
return -ENOSYS;
}
EXPORT_SYMBOL_GPL(irq_chip_set_type_parent);
/**
* irq_chip_retrigger_hierarchy - Retrigger an interrupt in hardware
* @data: Pointer to interrupt specific data
*
* Iterate through the domain hierarchy of the interrupt and check
* whether a hw retrigger function exists. If yes, invoke it.
*/
int irq_chip_retrigger_hierarchy(struct irq_data *data)
{
for (data = data->parent_data; data; data = data->parent_data)
if (data->chip && data->chip->irq_retrigger)
return data->chip->irq_retrigger(data);
return 0;
}
/**
* irq_chip_set_vcpu_affinity_parent - Set vcpu affinity on the parent interrupt
* @data: Pointer to interrupt specific data
* @vcpu_info: The vcpu affinity information
*/
int irq_chip_set_vcpu_affinity_parent(struct irq_data *data, void *vcpu_info)
{
data = data->parent_data;
if (data->chip->irq_set_vcpu_affinity)
return data->chip->irq_set_vcpu_affinity(data, vcpu_info);
return -ENOSYS;
}
/**
* irq_chip_set_wake_parent - Set/reset wake-up on the parent interrupt
* @data: Pointer to interrupt specific data
* @on: Whether to set or reset the wake-up capability of this irq
*
* Conditional, as the underlying parent chip might not implement it.
*/
int irq_chip_set_wake_parent(struct irq_data *data, unsigned int on)
{
data = data->parent_data;
if (data->chip->irq_set_wake)
return data->chip->irq_set_wake(data, on);
return -ENOSYS;
}
#endif
/**
* irq_chip_compose_msi_msg - Componse msi message for a irq chip
* @data: Pointer to interrupt specific data
* @msg: Pointer to the MSI message
*
* For hierarchical domains we find the first chip in the hierarchy
* which implements the irq_compose_msi_msg callback. For non
* hierarchical we use the top level chip.
*/
int irq_chip_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
{
struct irq_data *pos = NULL;
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
for (; data; data = data->parent_data)
#endif
if (data->chip && data->chip->irq_compose_msi_msg)
pos = data;
if (!pos)
return -ENOSYS;
pos->chip->irq_compose_msi_msg(pos, msg);
return 0;
}
/**
* irq_chip_pm_get - Enable power for an IRQ chip
* @data: Pointer to interrupt specific data
*
* Enable the power to the IRQ chip referenced by the interrupt data
* structure.
*/
int irq_chip_pm_get(struct irq_data *data)
{
int retval;
if (IS_ENABLED(CONFIG_PM) && data->chip->parent_device) {
retval = pm_runtime_get_sync(data->chip->parent_device);
if (retval < 0) {
pm_runtime_put_noidle(data->chip->parent_device);
return retval;
}
}
return 0;
}
/**
* irq_chip_pm_put - Disable power for an IRQ chip
* @data: Pointer to interrupt specific data
*
* Disable the power to the IRQ chip referenced by the interrupt data
* structure, belongs. Note that power will only be disabled, once this
* function has been called for all IRQs that have called irq_chip_pm_get().
*/
int irq_chip_pm_put(struct irq_data *data)
{
int retval = 0;
if (IS_ENABLED(CONFIG_PM) && data->chip->parent_device)
retval = pm_runtime_put(data->chip->parent_device);
return (retval < 0) ? retval : 0;
}