WSL2-Linux-Kernel/net/phonet/pn_netlink.c

311 строки
7.4 KiB
C
Исходник Обычный вид История

/*
* File: pn_netlink.c
*
* Phonet netlink interface
*
* Copyright (C) 2008 Nokia Corporation.
*
* Authors: Sakari Ailus <sakari.ailus@nokia.com>
* Remi Denis-Courmont
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/netlink.h>
#include <linux/phonet.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <net/sock.h>
#include <net/phonet/pn_dev.h>
/* Device address handling */
static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
u32 portid, u32 seq, int event);
void phonet_address_notify(int event, struct net_device *dev, u8 addr)
{
struct sk_buff *skb;
int err = -ENOBUFS;
skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct ifaddrmsg)) +
nla_total_size(1), GFP_KERNEL);
if (skb == NULL)
goto errout;
err = fill_addr(skb, dev, addr, 0, 0, event);
if (err < 0) {
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
2009-02-25 10:18:28 +03:00
rtnl_notify(skb, dev_net(dev), 0,
RTNLGRP_PHONET_IFADDR, NULL, GFP_KERNEL);
return;
errout:
rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_IFADDR, err);
}
static const struct nla_policy ifa_phonet_policy[IFA_MAX+1] = {
[IFA_LOCAL] = { .type = NLA_U8 },
};
static int addr_doit(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct net *net = sock_net(skb->sk);
struct nlattr *tb[IFA_MAX+1];
struct net_device *dev;
struct ifaddrmsg *ifm;
int err;
u8 pnaddr;
if (!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
if (!netlink_capable(skb, CAP_SYS_ADMIN))
return -EPERM;
ASSERT_RTNL();
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, ifa_phonet_policy);
if (err < 0)
return err;
ifm = nlmsg_data(nlh);
if (tb[IFA_LOCAL] == NULL)
return -EINVAL;
pnaddr = nla_get_u8(tb[IFA_LOCAL]);
if (pnaddr & 3)
/* Phonet addresses only have 6 high-order bits */
return -EINVAL;
dev = __dev_get_by_index(net, ifm->ifa_index);
if (dev == NULL)
return -ENODEV;
if (nlh->nlmsg_type == RTM_NEWADDR)
err = phonet_address_add(dev, pnaddr);
else
err = phonet_address_del(dev, pnaddr);
if (!err)
phonet_address_notify(nlh->nlmsg_type, dev, pnaddr);
return err;
}
static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
u32 portid, u32 seq, int event)
{
struct ifaddrmsg *ifm;
struct nlmsghdr *nlh;
nlh = nlmsg_put(skb, portid, seq, event, sizeof(*ifm), 0);
if (nlh == NULL)
return -EMSGSIZE;
ifm = nlmsg_data(nlh);
ifm->ifa_family = AF_PHONET;
ifm->ifa_prefixlen = 0;
ifm->ifa_flags = IFA_F_PERMANENT;
ifm->ifa_scope = RT_SCOPE_LINK;
ifm->ifa_index = dev->ifindex;
if (nla_put_u8(skb, IFA_LOCAL, addr))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 00:09:00 +03:00
nlmsg_end(skb, nlh);
return 0;
nla_put_failure:
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
{
struct phonet_device_list *pndevs;
struct phonet_device *pnd;
int dev_idx = 0, dev_start_idx = cb->args[0];
int addr_idx = 0, addr_start_idx = cb->args[1];
pndevs = phonet_device_list(sock_net(skb->sk));
rcu_read_lock();
list_for_each_entry_rcu(pnd, &pndevs->list, list) {
u8 addr;
if (dev_idx > dev_start_idx)
addr_start_idx = 0;
if (dev_idx++ < dev_start_idx)
continue;
addr_idx = 0;
for_each_set_bit(addr, pnd->addrs, 64) {
if (addr_idx++ < addr_start_idx)
continue;
if (fill_addr(skb, pnd->netdev, addr << 2,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, RTM_NEWADDR) < 0)
goto out;
}
}
out:
rcu_read_unlock();
cb->args[0] = dev_idx;
cb->args[1] = addr_idx;
return skb->len;
}
/* Routes handling */
static int fill_route(struct sk_buff *skb, struct net_device *dev, u8 dst,
u32 portid, u32 seq, int event)
{
struct rtmsg *rtm;
struct nlmsghdr *nlh;
nlh = nlmsg_put(skb, portid, seq, event, sizeof(*rtm), 0);
if (nlh == NULL)
return -EMSGSIZE;
rtm = nlmsg_data(nlh);
rtm->rtm_family = AF_PHONET;
rtm->rtm_dst_len = 6;
rtm->rtm_src_len = 0;
rtm->rtm_tos = 0;
rtm->rtm_table = RT_TABLE_MAIN;
rtm->rtm_protocol = RTPROT_STATIC;
rtm->rtm_scope = RT_SCOPE_UNIVERSE;
rtm->rtm_type = RTN_UNICAST;
rtm->rtm_flags = 0;
if (nla_put_u8(skb, RTA_DST, dst) ||
nla_put_u32(skb, RTA_OIF, dev->ifindex))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-17 00:09:00 +03:00
nlmsg_end(skb, nlh);
return 0;
nla_put_failure:
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
void rtm_phonet_notify(int event, struct net_device *dev, u8 dst)
{
struct sk_buff *skb;
int err = -ENOBUFS;
skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct ifaddrmsg)) +
nla_total_size(1) + nla_total_size(4), GFP_KERNEL);
if (skb == NULL)
goto errout;
err = fill_route(skb, dev, dst, 0, 0, event);
if (err < 0) {
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
rtnl_notify(skb, dev_net(dev), 0,
RTNLGRP_PHONET_ROUTE, NULL, GFP_KERNEL);
return;
errout:
rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_ROUTE, err);
}
static const struct nla_policy rtm_phonet_policy[RTA_MAX+1] = {
[RTA_DST] = { .type = NLA_U8 },
[RTA_OIF] = { .type = NLA_U32 },
};
static int route_doit(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct net *net = sock_net(skb->sk);
struct nlattr *tb[RTA_MAX+1];
struct net_device *dev;
struct rtmsg *rtm;
int err;
u8 dst;
if (!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
if (!netlink_capable(skb, CAP_SYS_ADMIN))
return -EPERM;
ASSERT_RTNL();
err = nlmsg_parse(nlh, sizeof(*rtm), tb, RTA_MAX, rtm_phonet_policy);
if (err < 0)
return err;
rtm = nlmsg_data(nlh);
if (rtm->rtm_table != RT_TABLE_MAIN || rtm->rtm_type != RTN_UNICAST)
return -EINVAL;
if (tb[RTA_DST] == NULL || tb[RTA_OIF] == NULL)
return -EINVAL;
dst = nla_get_u8(tb[RTA_DST]);
if (dst & 3) /* Phonet addresses only have 6 high-order bits */
return -EINVAL;
dev = __dev_get_by_index(net, nla_get_u32(tb[RTA_OIF]));
if (dev == NULL)
return -ENODEV;
if (nlh->nlmsg_type == RTM_NEWROUTE)
err = phonet_route_add(dev, dst);
else
err = phonet_route_del(dev, dst);
if (!err)
rtm_phonet_notify(nlh->nlmsg_type, dev, dst);
return err;
}
static int route_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
{
struct net *net = sock_net(skb->sk);
u8 addr;
rcu_read_lock();
for (addr = cb->args[0]; addr < 64; addr++) {
struct net_device *dev = phonet_route_get_rcu(net, addr << 2);
if (!dev)
continue;
if (fill_route(skb, dev, addr << 2, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, RTM_NEWROUTE) < 0)
goto out;
}
out:
rcu_read_unlock();
cb->args[0] = addr;
return skb->len;
}
int __init phonet_netlink_register(void)
{
int err = __rtnl_register(PF_PHONET, RTM_NEWADDR, addr_doit,
NULL, NULL);
if (err)
return err;
/* Further __rtnl_register() cannot fail */
__rtnl_register(PF_PHONET, RTM_DELADDR, addr_doit, NULL, NULL);
__rtnl_register(PF_PHONET, RTM_GETADDR, NULL, getaddr_dumpit, NULL);
__rtnl_register(PF_PHONET, RTM_NEWROUTE, route_doit, NULL, NULL);
__rtnl_register(PF_PHONET, RTM_DELROUTE, route_doit, NULL, NULL);
__rtnl_register(PF_PHONET, RTM_GETROUTE, NULL, route_dumpit, NULL);
return 0;
}