WSL2-Linux-Kernel/arch/csky/kernel/signal.c

346 строки
8.3 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/syscalls.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/highuid.h>
#include <linux/personality.h>
#include <linux/tty.h>
#include <linux/binfmts.h>
#include <linux/tracehook.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
#include <asm/traps.h>
#include <asm/ucontext.h>
#include <asm/vdso.h>
#include <abi/regdef.h>
#ifdef CONFIG_CPU_HAS_FPU
#include <abi/fpu.h>
static int restore_fpu_state(struct sigcontext *sc)
{
int err = 0;
struct user_fp user_fp;
err = copy_from_user(&user_fp, &sc->sc_user_fp, sizeof(user_fp));
restore_from_user_fp(&user_fp);
return err;
}
static int save_fpu_state(struct sigcontext *sc)
{
struct user_fp user_fp;
save_to_user_fp(&user_fp);
return copy_to_user(&sc->sc_user_fp, &user_fp, sizeof(user_fp));
}
#else
static inline int restore_fpu_state(struct sigcontext *sc) { return 0; }
static inline int save_fpu_state(struct sigcontext *sc) { return 0; }
#endif
struct rt_sigframe {
int sig;
struct siginfo *pinfo;
void *puc;
struct siginfo info;
struct ucontext uc;
};
static int
restore_sigframe(struct pt_regs *regs,
struct sigcontext *sc, int *pr2)
{
int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->task->restart_block.fn = do_no_restart_syscall;
err |= copy_from_user(regs, &sc->sc_pt_regs, sizeof(struct pt_regs));
err |= restore_fpu_state(sc);
*pr2 = regs->a0;
return err;
}
asmlinkage int
do_rt_sigreturn(void)
{
sigset_t set;
int a0;
struct pt_regs *regs = current_pt_regs();
struct rt_sigframe *frame = (struct rt_sigframe *)(regs->usp);
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
sigdelsetmask(&set, (sigmask(SIGKILL) | sigmask(SIGSTOP)));
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigframe(regs, &frame->uc.uc_mcontext, &a0))
goto badframe;
return a0;
badframe:
force_sig(SIGSEGV, current);
return 0;
}
static int setup_sigframe(struct sigcontext *sc, struct pt_regs *regs)
{
int err = 0;
err |= copy_to_user(&sc->sc_pt_regs, regs, sizeof(struct pt_regs));
err |= save_fpu_state(sc);
return err;
}
static inline void *
get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
unsigned long usp;
/* Default to using normal stack. */
usp = regs->usp;
/* This is the X/Open sanctioned signal stack switching. */
if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(usp)) {
if (!on_sig_stack(usp))
usp = current->sas_ss_sp + current->sas_ss_size;
}
return (void *)((usp - frame_size) & -8UL);
}
static int
setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe *frame;
int err = 0;
struct csky_vdso *vdso = current->mm->context.vdso;
frame = get_sigframe(&ksig->ka, regs, sizeof(*frame));
if (!frame)
return 1;
err |= __put_user(ksig->sig, &frame->sig);
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, &ksig->info);
/* Create the ucontext. */
err |= __put_user(0, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user((void *)current->sas_ss_sp,
&frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->usp),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigframe(&frame->uc.uc_mcontext, regs);
err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/* Set up registers for signal handler */
regs->usp = (unsigned long)frame;
regs->pc = (unsigned long)ksig->ka.sa.sa_handler;
regs->lr = (unsigned long)vdso->rt_signal_retcode;
adjust_stack:
regs->a0 = ksig->sig; /* first arg is signo */
regs->a1 = (unsigned long)(&(frame->info));
regs->a2 = (unsigned long)(&(frame->uc));
return err;
give_sigsegv:
if (ksig->sig == SIGSEGV)
ksig->ka.sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
goto adjust_stack;
}
/*
* OK, we're invoking a handler
*/
static int
handle_signal(struct ksignal *ksig, struct pt_regs *regs)
{
int ret;
sigset_t *oldset = sigmask_to_save();
/*
* set up the stack frame, regardless of SA_SIGINFO,
* and pass info anyway.
*/
ret = setup_rt_frame(ksig, oldset, regs);
if (ret != 0) {
force_sigsegv(ksig->sig, current);
return ret;
}
/* Block the signal if we were successful. */
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked, &ksig->ka.sa.sa_mask);
if (!(ksig->ka.sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, ksig->sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals
* that the kernel can handle, and then we build all the user-level signal
* handling stack-frames in one go after that.
*/
static void do_signal(struct pt_regs *regs, int syscall)
{
unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
struct ksignal ksig;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return;
/*
* If we were from a system call, check for system call restarting...
*/
if (syscall) {
continue_addr = regs->pc;
#if defined(__CSKYABIV2__)
restart_addr = continue_addr - 4;
#else
restart_addr = continue_addr - 2;
#endif
retval = regs->a0;
/*
* Prepare for system call restart. We do this here so that a
* debugger will see the already changed.
*/
switch (retval) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
regs->a0 = regs->orig_a0;
regs->pc = restart_addr;
break;
case -ERESTART_RESTARTBLOCK:
regs->a0 = -EINTR;
break;
}
}
if (try_to_freeze())
goto no_signal;
/*
* Get the signal to deliver. When running under ptrace, at this
* point the debugger may change all our registers ...
*/
if (get_signal(&ksig)) {
/*
* Depending on the signal settings we may need to revert the
* decision to restart the system call. But skip this if a
* debugger has chosen to restart at a different PC.
*/
if (regs->pc == restart_addr) {
if (retval == -ERESTARTNOHAND ||
(retval == -ERESTARTSYS &&
!(ksig.ka.sa.sa_flags & SA_RESTART))) {
regs->a0 = -EINTR;
regs->pc = continue_addr;
}
}
/* Whee! Actually deliver the signal. */
if (handle_signal(&ksig, regs) == 0) {
/*
* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
no_signal:
if (syscall) {
/*
* Handle restarting a different system call. As above,
* if a debugger has chosen to restart at a different PC,
* ignore the restart.
*/
if (retval == -ERESTART_RESTARTBLOCK
&& regs->pc == continue_addr) {
#if defined(__CSKYABIV2__)
regs->regs[3] = __NR_restart_syscall;
regs->pc -= 4;
#else
regs->regs[9] = __NR_restart_syscall;
regs->pc -= 2;
#endif
}
/*
* If there's no signal to deliver, we just put the saved
* sigmask back.
*/
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
}
asmlinkage void
do_notify_resume(unsigned int thread_flags, struct pt_regs *regs, int syscall)
{
if (thread_flags & _TIF_SIGPENDING)
do_signal(regs, syscall);
if (thread_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
}