WSL2-Linux-Kernel/include/linux/pci_hotplug.h

235 строки
8.1 KiB
C
Исходник Обычный вид История

/*
* PCI HotPlug Core Functions
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <kristen.c.accardi@intel.com>
*
*/
#ifndef _PCI_HOTPLUG_H
#define _PCI_HOTPLUG_H
/* These values come from the PCI Hotplug Spec */
enum pci_bus_speed {
PCI_SPEED_33MHz = 0x00,
PCI_SPEED_66MHz = 0x01,
PCI_SPEED_66MHz_PCIX = 0x02,
PCI_SPEED_100MHz_PCIX = 0x03,
PCI_SPEED_133MHz_PCIX = 0x04,
PCI_SPEED_66MHz_PCIX_ECC = 0x05,
PCI_SPEED_100MHz_PCIX_ECC = 0x06,
PCI_SPEED_133MHz_PCIX_ECC = 0x07,
PCI_SPEED_66MHz_PCIX_266 = 0x09,
PCI_SPEED_100MHz_PCIX_266 = 0x0a,
PCI_SPEED_133MHz_PCIX_266 = 0x0b,
PCI_SPEED_66MHz_PCIX_533 = 0x11,
PCI_SPEED_100MHz_PCIX_533 = 0x12,
PCI_SPEED_133MHz_PCIX_533 = 0x13,
PCI_SPEED_UNKNOWN = 0xff,
};
/* These values come from the PCI Express Spec */
enum pcie_link_width {
PCIE_LNK_WIDTH_RESRV = 0x00,
PCIE_LNK_X1 = 0x01,
PCIE_LNK_X2 = 0x02,
PCIE_LNK_X4 = 0x04,
PCIE_LNK_X8 = 0x08,
PCIE_LNK_X12 = 0x0C,
PCIE_LNK_X16 = 0x10,
PCIE_LNK_X32 = 0x20,
PCIE_LNK_WIDTH_UNKNOWN = 0xFF,
};
enum pcie_link_speed {
PCIE_2PT5GB = 0x14,
PCIE_LNK_SPEED_UNKNOWN = 0xFF,
};
struct hotplug_slot;
struct hotplug_slot_attribute {
struct attribute attr;
ssize_t (*show)(struct hotplug_slot *, char *);
ssize_t (*store)(struct hotplug_slot *, const char *, size_t);
};
#define to_hotplug_attr(n) container_of(n, struct hotplug_slot_attribute, attr);
/**
* struct hotplug_slot_ops -the callbacks that the hotplug pci core can use
* @owner: The module owner of this structure
* @enable_slot: Called when the user wants to enable a specific pci slot
* @disable_slot: Called when the user wants to disable a specific pci slot
* @set_attention_status: Called to set the specific slot's attention LED to
* the specified value
* @hardware_test: Called to run a specified hardware test on the specified
* slot.
* @get_power_status: Called to get the current power status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_attention_status: Called to get the current attention status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_latch_status: Called to get the current latch status of a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_max_bus_speed: Called to get the max bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
* @get_cur_bus_speed: Called to get the current bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
*
* The table of function pointers that is passed to the hotplug pci core by a
* hotplug pci driver. These functions are called by the hotplug pci core when
* the user wants to do something to a specific slot (query it for information,
* set an LED, enable / disable power, etc.)
*/
struct hotplug_slot_ops {
struct module *owner;
int (*enable_slot) (struct hotplug_slot *slot);
int (*disable_slot) (struct hotplug_slot *slot);
int (*set_attention_status) (struct hotplug_slot *slot, u8 value);
int (*hardware_test) (struct hotplug_slot *slot, u32 value);
int (*get_power_status) (struct hotplug_slot *slot, u8 *value);
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
/**
* struct hotplug_slot_info - used to notify the hotplug pci core of the state of the slot
* @power: if power is enabled or not (1/0)
* @attention_status: if the attention light is enabled or not (1/0)
* @latch_status: if the latch (if any) is open or closed (1/0)
* @adapter_present: if there is a pci board present in the slot or not (1/0)
* @address: (domain << 16 | bus << 8 | dev)
*
* Used to notify the hotplug pci core of the status of a specific slot.
*/
struct hotplug_slot_info {
u8 power_status;
u8 attention_status;
u8 latch_status;
u8 adapter_status;
enum pci_bus_speed max_bus_speed;
enum pci_bus_speed cur_bus_speed;
};
/**
* struct hotplug_slot - used to register a physical slot with the hotplug pci core
* @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
* @info: pointer to the &struct hotplug_slot_info for the initial values for
* this slot.
* @release: called during pci_hp_deregister to free memory allocated in a
* hotplug_slot structure.
* @private: used by the hotplug pci controller driver to store whatever it
* needs.
*/
struct hotplug_slot {
struct hotplug_slot_ops *ops;
struct hotplug_slot_info *info;
void (*release) (struct hotplug_slot *slot);
void *private;
/* Variables below this are for use only by the hotplug pci core. */
struct list_head slot_list;
PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-11 01:28:50 +04:00
struct pci_slot *pci_slot;
};
#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
{
return pci_slot_name(slot->pci_slot);
}
extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr,
const char *name);
PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-11 01:28:50 +04:00
extern int pci_hp_deregister(struct hotplug_slot *slot);
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
u32 revision;
u8 cache_line_size;
u8 latency_timer;
u8 enable_serr;
u8 enable_perr;
};
/* PCI-X Setting Record (Type 1) */
struct hpp_type1 {
u32 revision;
u8 max_mem_read;
u8 avg_max_split;
u16 tot_max_split;
};
/* PCI Express Setting Record (Type 2) */
struct hpp_type2 {
u32 revision;
u32 unc_err_mask_and;
u32 unc_err_mask_or;
u32 unc_err_sever_and;
u32 unc_err_sever_or;
u32 cor_err_mask_and;
u32 cor_err_mask_or;
u32 adv_err_cap_and;
u32 adv_err_cap_or;
u16 pci_exp_devctl_and;
u16 pci_exp_devctl_or;
u16 pci_exp_lnkctl_and;
u16 pci_exp_lnkctl_or;
u32 sec_unc_err_sever_and;
u32 sec_unc_err_sever_or;
u32 sec_unc_err_mask_and;
u32 sec_unc_err_mask_or;
};
struct hotplug_params {
struct hpp_type0 *t0; /* Type0: NULL if not available */
struct hpp_type1 *t1; /* Type1: NULL if not available */
struct hpp_type2 *t2; /* Type2: NULL if not available */
struct hpp_type0 type0_data;
struct hpp_type1 type1_data;
struct hpp_type2 type2_data;
};
#ifdef CONFIG_ACPI
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
int acpi_root_bridge(acpi_handle handle);
int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
int acpi_pci_detect_ejectable(struct pci_bus *pbus);
#endif
#endif