WSL2-Linux-Kernel/arch/powerpc/kernel/smp.c

648 строки
14 KiB
C
Исходник Обычный вид История

/*
* SMP support for ppc.
*
* Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
* deal of code from the sparc and intel versions.
*
* Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
*
* PowerPC-64 Support added by Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/err.h>
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/topology.h>
#include <asm/ptrace.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/smp.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/system.h>
#include <asm/mpic.h>
#include <asm/vdso_datapage.h>
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#endif
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
int smp_hw_index[NR_CPUS];
struct thread_info *secondary_ti;
cpumask_t cpu_possible_map = CPU_MASK_NONE;
cpumask_t cpu_online_map = CPU_MASK_NONE;
DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
EXPORT_SYMBOL(cpu_online_map);
EXPORT_SYMBOL(cpu_possible_map);
EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
/* SMP operations for this machine */
struct smp_ops_t *smp_ops;
static volatile unsigned int cpu_callin_map[NR_CPUS];
void smp_call_function_interrupt(void);
int smt_enabled_at_boot = 1;
static int ipi_fail_ok;
static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
#ifdef CONFIG_PPC64
void __devinit smp_generic_kick_cpu(int nr)
{
BUG_ON(nr < 0 || nr >= NR_CPUS);
/*
* The processor is currently spinning, waiting for the
* cpu_start field to become non-zero After we set cpu_start,
* the processor will continue on to secondary_start
*/
paca[nr].cpu_start = 1;
smp_mb();
}
#endif
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
void smp_message_recv(int msg)
{
switch(msg) {
case PPC_MSG_CALL_FUNCTION:
smp_call_function_interrupt();
break;
case PPC_MSG_RESCHEDULE:
/* XXX Do we have to do this? */
set_need_resched();
break;
case PPC_MSG_DEBUGGER_BREAK:
if (crash_ipi_function_ptr) {
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
crash_ipi_function_ptr(get_irq_regs());
break;
}
#ifdef CONFIG_DEBUGGER
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
debugger_ipi(get_irq_regs());
break;
#endif /* CONFIG_DEBUGGER */
/* FALLTHROUGH */
default:
printk("SMP %d: smp_message_recv(): unknown msg %d\n",
smp_processor_id(), msg);
break;
}
}
void smp_send_reschedule(int cpu)
{
if (likely(smp_ops))
smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE);
}
#ifdef CONFIG_DEBUGGER
void smp_send_debugger_break(int cpu)
{
if (likely(smp_ops))
smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK);
}
#endif
#ifdef CONFIG_KEXEC
void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *))
{
crash_ipi_function_ptr = crash_ipi_callback;
if (crash_ipi_callback && smp_ops) {
mb();
smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK);
}
}
#endif
static void stop_this_cpu(void *dummy)
{
local_irq_disable();
while (1)
;
}
/*
* Structure and data for smp_call_function(). This is designed to minimise
* static memory requirements. It also looks cleaner.
* Stolen from the i386 version.
*/
static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
static struct call_data_struct {
void (*func) (void *info);
void *info;
atomic_t started;
atomic_t finished;
int wait;
} *call_data;
/* delay of at least 8 seconds */
#define SMP_CALL_TIMEOUT 8
/*
* These functions send a 'generic call function' IPI to other online
* CPUS in the system.
*
* [SUMMARY] Run a function on other CPUs.
* <func> The function to run. This must be fast and non-blocking.
* <info> An arbitrary pointer to pass to the function.
* <nonatomic> currently unused.
* <wait> If true, wait (atomically) until function has completed on other CPUs.
* [RETURNS] 0 on success, else a negative status code. Does not return until
* remote CPUs are nearly ready to execute <<func>> or are or have executed.
* <map> is a cpu map of the cpus to send IPI to.
*
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler.
*/
static int __smp_call_function_map(void (*func) (void *info), void *info,
int nonatomic, int wait, cpumask_t map)
{
struct call_data_struct data;
int ret = -1, num_cpus;
int cpu;
u64 timeout;
if (unlikely(smp_ops == NULL))
return ret;
data.func = func;
data.info = info;
atomic_set(&data.started, 0);
data.wait = wait;
if (wait)
atomic_set(&data.finished, 0);
/* remove 'self' from the map */
if (cpu_isset(smp_processor_id(), map))
cpu_clear(smp_processor_id(), map);
/* sanity check the map, remove any non-online processors. */
cpus_and(map, map, cpu_online_map);
num_cpus = cpus_weight(map);
if (!num_cpus)
goto done;
call_data = &data;
smp_wmb();
/* Send a message to all CPUs in the map */
for_each_cpu_mask(cpu, map)
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
/* Wait for indication that they have received the message */
while (atomic_read(&data.started) != num_cpus) {
HMT_low();
if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other cpus not "
"responding (%d)\n", smp_processor_id(),
atomic_read(&data.started));
if (!ipi_fail_ok)
debugger(NULL);
goto out;
}
}
/* optionally wait for the CPUs to complete */
if (wait) {
while (atomic_read(&data.finished) != num_cpus) {
HMT_low();
if (get_tb() >= timeout) {
printk("smp_call_function on cpu %d: other "
"cpus not finishing (%d/%d)\n",
smp_processor_id(),
atomic_read(&data.finished),
atomic_read(&data.started));
debugger(NULL);
goto out;
}
}
}
done:
ret = 0;
out:
call_data = NULL;
HMT_medium();
return ret;
}
static int __smp_call_function(void (*func)(void *info), void *info,
int nonatomic, int wait)
{
int ret;
spin_lock(&call_lock);
ret =__smp_call_function_map(func, info, nonatomic, wait,
cpu_online_map);
spin_unlock(&call_lock);
return ret;
}
int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
int wait)
{
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
return __smp_call_function(func, info, nonatomic, wait);
}
EXPORT_SYMBOL(smp_call_function);
int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
int nonatomic, int wait)
{
cpumask_t map = CPU_MASK_NONE;
int ret = 0;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
if (!cpu_online(cpu))
return -EINVAL;
cpu_set(cpu, map);
if (cpu != get_cpu()) {
spin_lock(&call_lock);
ret = __smp_call_function_map(func, info, nonatomic, wait, map);
spin_unlock(&call_lock);
} else {
local_irq_disable();
func(info);
local_irq_enable();
}
put_cpu();
return ret;
}
EXPORT_SYMBOL(smp_call_function_single);
void smp_send_stop(void)
{
int nolock;
/* It's OK to fail sending the IPI, since the alternative is to
* be stuck forever waiting on the other CPU to take the interrupt.
*
* It's better to at least continue and go through reboot, since this
* function is usually called at panic or reboot time in the first
* place.
*/
ipi_fail_ok = 1;
/* Don't deadlock in case we got called through panic */
nolock = !spin_trylock(&call_lock);
__smp_call_function_map(stop_this_cpu, NULL, 1, 0, cpu_online_map);
if (!nolock)
spin_unlock(&call_lock);
}
void smp_call_function_interrupt(void)
{
void (*func) (void *info);
void *info;
int wait;
/* call_data will be NULL if the sender timed out while
* waiting on us to receive the call.
*/
if (!call_data)
return;
func = call_data->func;
info = call_data->info;
wait = call_data->wait;
if (!wait)
smp_mb__before_atomic_inc();
/*
* Notify initiating CPU that I've grabbed the data and am
* about to execute the function
*/
atomic_inc(&call_data->started);
/*
* At this point the info structure may be out of scope unless wait==1
*/
(*func)(info);
if (wait) {
smp_mb__before_atomic_inc();
atomic_inc(&call_data->finished);
}
}
extern struct gettimeofday_struct do_gtod;
struct thread_info *current_set[NR_CPUS];
DECLARE_PER_CPU(unsigned int, pvr);
static void __devinit smp_store_cpu_info(int id)
{
per_cpu(pvr, id) = mfspr(SPRN_PVR);
}
static void __init smp_create_idle(unsigned int cpu)
{
struct task_struct *p;
/* create a process for the processor */
p = fork_idle(cpu);
if (IS_ERR(p))
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
#ifdef CONFIG_PPC64
paca[cpu].__current = p;
#endif
current_set[cpu] = task_thread_info(p);
task_thread_info(p)->cpu = cpu;
}
void __init smp_prepare_cpus(unsigned int max_cpus)
{
unsigned int cpu;
DBG("smp_prepare_cpus\n");
/*
* setup_cpu may need to be called on the boot cpu. We havent
* spun any cpus up but lets be paranoid.
*/
BUG_ON(boot_cpuid != smp_processor_id());
/* Fixup boot cpu */
smp_store_cpu_info(boot_cpuid);
cpu_callin_map[boot_cpuid] = 1;
if (smp_ops)
max_cpus = smp_ops->probe();
else
max_cpus = 1;
smp_space_timers(max_cpus);
for_each_possible_cpu(cpu)
if (cpu != boot_cpuid)
smp_create_idle(cpu);
}
void __devinit smp_prepare_boot_cpu(void)
{
BUG_ON(smp_processor_id() != boot_cpuid);
cpu_set(boot_cpuid, cpu_online_map);
#ifdef CONFIG_PPC64
paca[boot_cpuid].__current = current;
#endif
current_set[boot_cpuid] = task_thread_info(current);
}
#ifdef CONFIG_HOTPLUG_CPU
/* State of each CPU during hotplug phases */
DEFINE_PER_CPU(int, cpu_state) = { 0 };
int generic_cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
if (cpu == boot_cpuid)
return -EBUSY;
cpu_clear(cpu, cpu_online_map);
#ifdef CONFIG_PPC64
vdso_data->processorCount--;
fixup_irqs(cpu_online_map);
#endif
return 0;
}
int generic_cpu_enable(unsigned int cpu)
{
/* Do the normal bootup if we haven't
* already bootstrapped. */
if (system_state != SYSTEM_RUNNING)
return -ENOSYS;
/* get the target out of it's holding state */
per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
smp_wmb();
while (!cpu_online(cpu))
cpu_relax();
#ifdef CONFIG_PPC64
fixup_irqs(cpu_online_map);
/* counter the irq disable in fixup_irqs */
local_irq_enable();
#endif
return 0;
}
void generic_cpu_die(unsigned int cpu)
{
int i;
for (i = 0; i < 100; i++) {
smp_rmb();
if (per_cpu(cpu_state, cpu) == CPU_DEAD)
return;
msleep(100);
}
printk(KERN_ERR "CPU%d didn't die...\n", cpu);
}
void generic_mach_cpu_die(void)
{
unsigned int cpu;
local_irq_disable();
cpu = smp_processor_id();
printk(KERN_DEBUG "CPU%d offline\n", cpu);
__get_cpu_var(cpu_state) = CPU_DEAD;
smp_wmb();
while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
cpu_relax();
cpu_set(cpu, cpu_online_map);
local_irq_enable();
}
#endif
static int __devinit cpu_enable(unsigned int cpu)
{
if (smp_ops && smp_ops->cpu_enable)
return smp_ops->cpu_enable(cpu);
return -ENOSYS;
}
[PATCH] Change cpu_up and co from __devinit to __cpuinit Compiling the kernel with CONFIG_HOTPLUG = y and CONFIG_HOTPLUG_CPU = n with CONFIG_RELOCATABLE = y generates the following modpost warnings WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141b7d) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141b9c) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.text:__cpu_up from .text between '_cpu_up' (at offset 0xc0141bd8) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c05) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c26) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c37) and 'cpu_up' This is because cpu_up, _cpu_up and __cpu_up (in some architectures) are defined as __devinit AND __cpu_up calls some __cpuinit functions. Since __cpuinit would map to __init with this kind of a configuration, we get a .text refering .init.data warning. This patch solves the problem by converting all of __cpu_up, _cpu_up and cpu_up from __devinit to __cpuinit. The approach is justified since the callers of cpu_up are either dependent on CONFIG_HOTPLUG_CPU or are of __init type. Thus when CONFIG_HOTPLUG_CPU=y, all these cpu up functions would land up in .text section, and when CONFIG_HOTPLUG_CPU=n, all these functions would land up in .init section. Tested on a i386 SMP machine running linux-2.6.20-rc3-mm1. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 10:15:34 +03:00
int __cpuinit __cpu_up(unsigned int cpu)
{
int c;
secondary_ti = current_set[cpu];
if (!cpu_enable(cpu))
return 0;
if (smp_ops == NULL ||
(smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)))
return -EINVAL;
/* Make sure callin-map entry is 0 (can be leftover a CPU
* hotplug
*/
cpu_callin_map[cpu] = 0;
/* The information for processor bringup must
* be written out to main store before we release
* the processor.
*/
smp_mb();
/* wake up cpus */
DBG("smp: kicking cpu %d\n", cpu);
smp_ops->kick_cpu(cpu);
/*
* wait to see if the cpu made a callin (is actually up).
* use this value that I found through experimentation.
* -- Cort
*/
if (system_state < SYSTEM_RUNNING)
for (c = 50000; c && !cpu_callin_map[cpu]; c--)
udelay(100);
#ifdef CONFIG_HOTPLUG_CPU
else
/*
* CPUs can take much longer to come up in the
* hotplug case. Wait five seconds.
*/
for (c = 25; c && !cpu_callin_map[cpu]; c--) {
msleep(200);
}
#endif
if (!cpu_callin_map[cpu]) {
printk("Processor %u is stuck.\n", cpu);
return -ENOENT;
}
printk("Processor %u found.\n", cpu);
if (smp_ops->give_timebase)
smp_ops->give_timebase();
/* Wait until cpu puts itself in the online map */
while (!cpu_online(cpu))
cpu_relax();
return 0;
}
/* Activate a secondary processor. */
int __devinit start_secondary(void *unused)
{
unsigned int cpu = smp_processor_id();
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
smp_store_cpu_info(cpu);
set_dec(tb_ticks_per_jiffy);
preempt_disable();
cpu_callin_map[cpu] = 1;
smp_ops->setup_cpu(cpu);
if (smp_ops->take_timebase)
smp_ops->take_timebase();
if (system_state > SYSTEM_BOOTING)
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 02:06:59 +03:00
snapshot_timebase();
secondary_cpu_time_init();
spin_lock(&call_lock);
cpu_set(cpu, cpu_online_map);
spin_unlock(&call_lock);
local_irq_enable();
cpu_idle();
return 0;
}
int setup_profiling_timer(unsigned int multiplier)
{
return 0;
}
void __init smp_cpus_done(unsigned int max_cpus)
{
cpumask_t old_mask;
/* We want the setup_cpu() here to be called from CPU 0, but our
* init thread may have been "borrowed" by another CPU in the meantime
* se we pin us down to CPU 0 for a short while
*/
old_mask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
if (smp_ops)
smp_ops->setup_cpu(boot_cpuid);
set_cpus_allowed(current, old_mask);
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 02:06:59 +03:00
snapshot_timebases();
dump_numa_cpu_topology();
}
#ifdef CONFIG_HOTPLUG_CPU
int __cpu_disable(void)
{
if (smp_ops->cpu_disable)
return smp_ops->cpu_disable();
return -ENOSYS;
}
void __cpu_die(unsigned int cpu)
{
if (smp_ops->cpu_die)
smp_ops->cpu_die(cpu);
}
#endif