WSL2-Linux-Kernel/arch/arm/mm/cache-xsc3l2.c

236 строки
5.6 KiB
C
Исходник Обычный вид История

[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
/*
* arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
*
* Copyright (C) 2007 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <asm/system.h>
#include <asm/cputype.h>
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
#include <asm/cacheflush.h>
#include <asm/kmap_types.h>
#include <asm/fixmap.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include "mm.h"
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
#define CR_L2 (1 << 26)
#define CACHE_LINE_SIZE 32
#define CACHE_LINE_SHIFT 5
#define CACHE_WAY_PER_SET 8
#define CACHE_WAY_SIZE(l2ctype) (8192 << (((l2ctype) >> 8) & 0xf))
#define CACHE_SET_SIZE(l2ctype) (CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
static inline int xsc3_l2_present(void)
{
unsigned long l2ctype;
__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
return !!(l2ctype & 0xf8);
}
static inline void xsc3_l2_clean_mva(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
}
static inline void xsc3_l2_inv_mva(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
}
static inline void xsc3_l2_inv_all(void)
{
unsigned long l2ctype, set_way;
int set, way;
__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
for (way = 0; way < CACHE_WAY_PER_SET; way++) {
set_way = (way << 29) | (set << 5);
__asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
}
}
dsb();
}
#ifdef CONFIG_HIGHMEM
#define l2_map_save_flags(x) raw_local_save_flags(x)
#define l2_map_restore_flags(x) raw_local_irq_restore(x)
#else
#define l2_map_save_flags(x) ((x) = 0)
#define l2_map_restore_flags(x) ((void)(x))
#endif
static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
unsigned long flags)
{
#ifdef CONFIG_HIGHMEM
unsigned long va = prev_va & PAGE_MASK;
unsigned long pa_offset = pa << (32 - PAGE_SHIFT);
if (unlikely(pa_offset < (prev_va << (32 - PAGE_SHIFT)))) {
/*
* Switching to a new page. Because cache ops are
* using virtual addresses only, we must put a mapping
* in place for it. We also enable interrupts for a
* short while and disable them again to protect this
* mapping.
*/
unsigned long idx;
raw_local_irq_restore(flags);
idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
raw_local_irq_restore(flags | PSR_I_BIT);
set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
local_flush_tlb_kernel_page(va);
}
return va + (pa_offset >> (32 - PAGE_SHIFT));
#else
return __phys_to_virt(pa);
#endif
}
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
{
unsigned long vaddr, flags;
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
if (start == 0 && end == -1ul) {
xsc3_l2_inv_all();
return;
}
vaddr = -1; /* to force the first mapping */
l2_map_save_flags(flags);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
/*
* Clean and invalidate partial first cache line.
*/
if (start & (CACHE_LINE_SIZE - 1)) {
vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
start = (start | (CACHE_LINE_SIZE - 1)) + 1;
}
/*
* Invalidate all full cache lines between 'start' and 'end'.
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
*/
while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
vaddr = l2_map_va(start, vaddr, flags);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
}
/*
* Clean and invalidate partial last cache line.
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
*/
if (start < end) {
vaddr = l2_map_va(start, vaddr, flags);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
}
l2_map_restore_flags(flags);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
dsb();
}
static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
{
unsigned long vaddr, flags;
vaddr = -1; /* to force the first mapping */
l2_map_save_flags(flags);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
vaddr = l2_map_va(start, vaddr, flags);
xsc3_l2_clean_mva(vaddr);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
start += CACHE_LINE_SIZE;
}
l2_map_restore_flags(flags);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
dsb();
}
/*
* optimize L2 flush all operation by set/way format
*/
static inline void xsc3_l2_flush_all(void)
{
unsigned long l2ctype, set_way;
int set, way;
__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
for (way = 0; way < CACHE_WAY_PER_SET; way++) {
set_way = (way << 29) | (set << 5);
__asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
}
}
dsb();
}
static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
{
unsigned long vaddr, flags;
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
if (start == 0 && end == -1ul) {
xsc3_l2_flush_all();
return;
}
vaddr = -1; /* to force the first mapping */
l2_map_save_flags(flags);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
vaddr = l2_map_va(start, vaddr, flags);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
start += CACHE_LINE_SIZE;
}
l2_map_restore_flags(flags);
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
dsb();
}
static int __init xsc3_l2_init(void)
{
if (!cpu_is_xsc3() || !xsc3_l2_present())
return 0;
if (get_cr() & CR_L2) {
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
pr_info("XScale3 L2 cache enabled.\n");
xsc3_l2_inv_all();
outer_cache.inv_range = xsc3_l2_inv_range;
outer_cache.clean_range = xsc3_l2_clean_range;
outer_cache.flush_range = xsc3_l2_flush_range;
}
[ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann <LW@KARO-electronics.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-06 12:34:03 +04:00
return 0;
}
core_initcall(xsc3_l2_init);