microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/include/target/target_core_backend.h

101 строка
3.9 KiB
C
Исходник Обычный вид История

target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
#ifndef TARGET_CORE_BACKEND_H
#define TARGET_CORE_BACKEND_H
target: Use a PASSTHROUGH flag instead of transport_types It seems like we only care if a transport is passthrough or not. Convert transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a flag, TRANSPORT_FLAG_PASSTHROUGH. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-20 00:44:41 +03:00
#define TRANSPORT_FLAG_PASSTHROUGH 1
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
target: simplify backend driver registration Rewrite the backend driver registration based on what we did to the fabric drivers: introduce a read-only struct target_bakckend_ops that the driver registers, which is then instanciate as a struct target_backend by the core. This allows the ops vector to be smaller and allows us to mark it const. At the same time the registration function can set up the configfs attributes, avoiding the need to add additional boilerplate code for that to the drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-10 19:14:56 +03:00
struct target_backend_ops {
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
char name[16];
target: kill struct se_subsystem_dev Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-08 08:03:19 +04:00
char inquiry_prod[16];
char inquiry_rev[4];
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
struct module *owner;
target: Use a PASSTHROUGH flag instead of transport_types It seems like we only care if a transport is passthrough or not. Convert transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a flag, TRANSPORT_FLAG_PASSTHROUGH. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-20 00:44:41 +03:00
u8 transport_flags;
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
int (*attach_hba)(struct se_hba *, u32);
void (*detach_hba)(struct se_hba *);
int (*pmode_enable_hba)(struct se_hba *, unsigned long);
target: kill struct se_subsystem_dev Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-08 08:03:19 +04:00
struct se_device *(*alloc_device)(struct se_hba *, const char *);
int (*configure_device)(struct se_device *);
void (*free_device)(struct se_device *device);
ssize_t (*set_configfs_dev_params)(struct se_device *,
const char *, ssize_t);
ssize_t (*show_configfs_dev_params)(struct se_device *, char *);
target: fix use-after-free with PSCSI sense data The pointer to the sense buffer is fetched by transport_get_sense_data, but this is called by target_complete_ok_work long after pscsi_req_done has freed the struct that contains it. Pass instead the fabric's sense buffer to transport_complete, and copy the data to it directly in transport_complete. Setting SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-09-05 19:09:15 +04:00
void (*transport_complete)(struct se_cmd *cmd,
struct scatterlist *,
unsigned char *);
target: add a parse_cdb method to the backend drivers Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-20 19:59:14 +04:00
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 00:24:09 +04:00
sense_reason_t (*parse_cdb)(struct se_cmd *cmd);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
u32 (*get_device_type)(struct se_device *);
sector_t (*get_blocks)(struct se_device *);
target: Pass through I/O topology for block backstores In addition to block size (already implemented), passing through alignment offset, logical-to-phys block exponent, I/O granularity and optimal I/O length will allow initiators to properly handle layout on LUNs with 4K block sizes. Tested with various weird values via scsi_debug module. One thing to look at with this patch is the new block limits values -- instead of granularity 1 optimal 8192, Lio will now be returning whatever the block device says, which may affect performance. Signed-off-by: Andy Grover <agrover@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-11 20:59:17 +04:00
sector_t (*get_alignment_offset_lbas)(struct se_device *);
/* lbppbe = logical blocks per physical block exponent. see SBC-3 */
unsigned int (*get_lbppbe)(struct se_device *);
unsigned int (*get_io_min)(struct se_device *);
unsigned int (*get_io_opt)(struct se_device *);
target: remove struct se_task We can use struct se_cmd for everything it did. Make sure to pass the S/G list and data direction to the execution function to ease adding back BIDI support later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-24 08:25:06 +04:00
unsigned char *(*get_sense_buffer)(struct se_cmd *);
target/iblock: Use backend REQ_FLUSH hint for WriteCacheEnabled status This patch allows IBLOCK to check block hints in request_queue->flush_flags when reporting current backend device WriteCacheEnabled status to a remote SCSI initiator port. This is done via a se_subsystem_api->get_write_cache() call instead of a backend se_device creation time flag, as we expect REQ_FLUSH bits to possibly change from an underlying blk_queue_flush() by the SCSI disk driver, or internal raw struct block_device driver usage. Also go ahead and update iblock_execute_rw() bio I/O path code to use REQ_FLUSH + REQ_FUA hints when determining WRITE_FUA usage, and make SPC emulation code use a spc_check_dev_wce() helper to handle both types of cases for virtual backend subsystem drivers. (asias: Drop unnecessary comparsion operators) Reported-by: majianpeng <majianpeng@gmail.com> Cc: majianpeng <majianpeng@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-01-30 10:10:06 +04:00
bool (*get_write_cache)(struct se_device *);
target: Add DIF related base definitions This patch adds DIF related definitions to target_core_base.h that includes enums for target_prot_op + target_prot_type + target_prot_version + target_guard_type + target_pi_error. Also included is struct se_dif_v1_tuple, along with changes to struct se_cmd, struct se_dev_attrib, and struct se_device. Also, add new se_subsystem_api->[init,format,free]_prot() callers used by target core code to setup backend specific protection information after the device has been configured. Enums taken from Sagi Grimberg's original patch. v2 changes: - Drop guard_type related definitions - Update target_prot_op + target_prot_ho definitions (Sagi) - Drop SCF_PROT + pi_prot_version flag - Add se_subsystem_api->format_prot() (Sagi) - Add hw_pi_prot_type device attribute Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-24 00:28:13 +04:00
int (*init_prot)(struct se_device *);
int (*format_prot)(struct se_device *);
void (*free_prot)(struct se_device *);
target: Move dev_cit to struct se_subsystem_api This patch adds initial support for dev_cit as external config_item_type. This includes a new struct target_backend_cits to hold the external CITs within struct se_subsystem_api, and target_core_setup_sub_cits() to be used by backend drivers ahead of transport_subsystem_register(). It adds a TB_CIT_SETUP() helper following target_core_fabric_configfs.c to perform the config_item_type assignments. Also, drop left-over target_core_dev_cit from target_core_configfs.c code and update comments. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 00:59:20 +03:00
target: simplify backend driver registration Rewrite the backend driver registration based on what we did to the fabric drivers: introduce a read-only struct target_bakckend_ops that the driver registers, which is then instanciate as a struct target_backend by the core. This allows the ops vector to be smaller and allows us to mark it const. At the same time the registration function can set up the configfs attributes, avoiding the need to add additional boilerplate code for that to the drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-10 19:14:56 +03:00
struct configfs_attribute **tb_dev_attrib_attrs;
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
};
target: rename spc_ops These really are sbc_ops, so name them correctly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-07 18:55:50 +04:00
struct sbc_ops {
target: Allow sbc_ops->execute_rw() to accept SGLs + data_direction COMPARE_AND_WRITE expects to be able to send down a DMA_FROM_DEVICE to obtain the necessary READ payload for comparision against the first half of the WRITE payload containing the verify user data. Currently virtual backends expect to internally reference SGLs, SGL nents, and data_direction, so change IBLOCK, FILEIO and RD sbc_ops->execute_rw() to accept this values as function parameters. Also add default sbc_execute_rw() handler for the typical case for cmd->execute_rw() submission using cmd->t_data_sg, cmd->t_data_nents, and cmd->data_direction). v2 Changes: - Add SCF_COMPARE_AND_WRITE command flag - Use sbc_execute_rw() for normal cmd->execute_rw() submission with expected se_cmd members. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-20 10:57:30 +04:00
sense_reason_t (*execute_rw)(struct se_cmd *cmd, struct scatterlist *,
u32, enum dma_data_direction);
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 00:24:09 +04:00
sense_reason_t (*execute_sync_cache)(struct se_cmd *cmd);
sense_reason_t (*execute_write_same)(struct se_cmd *cmd);
target: simplify UNMAP handling Move a little more processing into the core code, and lift the previous do_unmap callback into the sbc_ops structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-19 16:10:59 +03:00
sense_reason_t (*execute_unmap)(struct se_cmd *cmd,
sector_t lba, sector_t nolb);
target: add struct spc_ops + initial ->execute_rw pointer usage Remove the execute_cmd method in struct se_subsystem_api, and always use the one directly in struct se_cmd. To make life simpler for SBC virtual backends a struct spc_ops that is passed to sbc_parse_cmd is added. For now it only contains an execute_rw member, but more will follow with the subsequent commits. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-06-18 02:40:52 +04:00
};
target: simplify backend driver registration Rewrite the backend driver registration based on what we did to the fabric drivers: introduce a read-only struct target_bakckend_ops that the driver registers, which is then instanciate as a struct target_backend by the core. This allows the ops vector to be smaller and allows us to mark it const. At the same time the registration function can set up the configfs attributes, avoiding the need to add additional boilerplate code for that to the drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-10 19:14:56 +03:00
int transport_backend_register(const struct target_backend_ops *);
void target_backend_unregister(const struct target_backend_ops *);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
target: replace ->execute_task with ->execute_cmd Make CDB emulation work on commands instead of tasks again as a preparation of removing tasks completely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-23 19:35:33 +04:00
void target_complete_cmd(struct se_cmd *, u8);
target: Report correct response length for some commands When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515 Signed-off-by: Roland Dreier <roland@purestorage.com> Tested-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-10 22:07:47 +04:00
void target_complete_cmd_with_length(struct se_cmd *, u8, int);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 00:24:09 +04:00
sense_reason_t spc_parse_cdb(struct se_cmd *cmd, unsigned int *size);
sense_reason_t spc_emulate_report_luns(struct se_cmd *cmd);
target: Export SPC inquiry emulation Some target drivers might need to access the inquiry data directly, without sending out the actual command. So export these functions. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Nicholas Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-12-17 12:53:35 +04:00
sense_reason_t spc_emulate_inquiry_std(struct se_cmd *, unsigned char *);
sense_reason_t spc_emulate_evpd_83(struct se_cmd *, unsigned char *);
target: add a parse_cdb method to the backend drivers Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-20 19:59:14 +04:00
target: pass sense_reason as a return value Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-07 00:24:09 +04:00
sense_reason_t sbc_parse_cdb(struct se_cmd *cmd, struct sbc_ops *ops);
target: provide generic sbc device type/revision helpers Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-10-07 18:55:53 +04:00
u32 sbc_get_device_rev(struct se_device *dev);
u32 sbc_get_device_type(struct se_device *dev);
target: Rename spc_get_write_same_sectors -> sbc_get_write_same_sectors Trivial, but WRITE SAME is an SBC command so it seems strange for a related function (defined in target_core_sbc.c) to be in the spc_ namespace. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-22 21:52:57 +04:00
sector_t sbc_get_write_same_sectors(struct se_cmd *cmd);
target/sbc: Add sbc_dif_generate software emulation This patch adds WRITE_INSERT emulation within target-core using TYPE1 / TYPE3 PI modes in sbc_dif_generate() code. This is useful in order for existing legacy fabrics that do not support protection offloads to interact with backend devices that currently have T10 PI enabled. v2 changes: - Rename to sbc_dif_generate() (Sagi) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-03 01:19:09 +04:00
void sbc_dif_generate(struct se_cmd *);
target: Merge sbc_verify_dif_read|write Instead of providing DIF verify routines for read/write that are almost identical and conditionally copy protection information, just let the caller do the right thing. Have a single sbc_dif_verify that handles an sgl (that does NOT copy any data) and a protection information copy routine used by rd_mcp and fileio backend. In the WRITE case, call sbc_dif_verify with cmd->t_prot_sg and then do the copy from it to local sgl (assuming the verify succeeded of course). In the READ case, call sbc_dif_verify with the local sgl and if it succeeds, copy it to t_prot_sg (or not if we are stripping it). (Fix apply breakage from commit c836777 - nab) Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-19 20:27:19 +03:00
sense_reason_t sbc_dif_verify(struct se_cmd *, sector_t, unsigned int,
target/sbc: Add DIF TYPE1+TYPE3 read/write verify emulation This patch adds support for DIF read/write verify emulation for TARGET_DIF_TYPE1_PROT + TARGET_DIF_TYPE3_PROT operation. This includes sbc_dif_verify_write() + sbc_dif_verify_read() calls accessable by backend drivers to perform DIF verify for SGL based data and protection information. Also included is sbc_dif_copy_prot() logic to copy protection information to/from backend provided protection SGLs. Based on scsi_debug.c DIF TYPE1+TYPE3 emulation. v2 changes: - Select CRC_T10DIF for TARGET_CORE in Kconfig (Fengguang) - Drop IP checksum logic from sbc_dif_v1_verify (MKP) - Fix offset on app_tag = 0xffff in sbc_dif_verify_read() Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-08 02:44:57 +04:00
unsigned int, struct scatterlist *, int);
target: Merge sbc_verify_dif_read|write Instead of providing DIF verify routines for read/write that are almost identical and conditionally copy protection information, just let the caller do the right thing. Have a single sbc_dif_verify that handles an sgl (that does NOT copy any data) and a protection information copy routine used by rd_mcp and fileio backend. In the WRITE case, call sbc_dif_verify with cmd->t_prot_sg and then do the copy from it to local sgl (assuming the verify succeeded of course). In the READ case, call sbc_dif_verify with the local sgl and if it succeeds, copy it to t_prot_sg (or not if we are stripping it). (Fix apply breakage from commit c836777 - nab) Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-04-19 20:27:19 +03:00
void sbc_dif_copy_prot(struct se_cmd *, unsigned int, bool,
struct scatterlist *, int);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
void transport_set_vpd_proto_id(struct t10_vpd *, unsigned char *);
int transport_set_vpd_assoc(struct t10_vpd *, unsigned char *);
int transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *);
int transport_set_vpd_ident(struct t10_vpd *, unsigned char *);
target: consolidate backend attribute implementations Provide a common sets of dev_attrib attributes for all devices using the generic SPC/SBC parsers, and a second one with the minimal required read-only attributes for passthrough devices. The later is only used by pscsi for now, but will be wired up for the full-passthrough TCMU use case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-10 19:14:57 +03:00
extern struct configfs_attribute *sbc_attrib_attrs[];
extern struct configfs_attribute *passthrough_attrib_attrs[];
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
/* core helpers also used by command snooping in pscsi */
target: Allow control CDBs with data > 1 page We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-17 04:57:08 +04:00
void *transport_kmap_data_sg(struct se_cmd *);
void transport_kunmap_data_sg(struct se_cmd *);
target: Make helpers non static for EXTENDED_COPY command setup Both target_alloc_sgl() and transport_generic_map_mem_to_cmd() are required by EXTENDED_COPY logic when setting up internally dispatched command descriptors, so go ahead and make both of these non static. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-22 22:58:43 +04:00
/* core helpers also used by xcopy during internal command setup */
sense_reason_t transport_generic_map_mem_to_cmd(struct se_cmd *,
struct scatterlist *, u32, struct scatterlist *, u32);
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
target: Convert se_node_acl->device_list[] to RCU hlist This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-23 06:42:19 +03:00
bool target_lun_is_rdonly(struct se_cmd *);
target: Move passthrough CDB parsing into a common function Aside from whether they handle BIDI ops or not, parsing of the CDB by kernel and user SCSI passthrough modules should be identical. Move this into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user. Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-20 00:44:40 +03:00
sense_reason_t passthrough_parse_cdb(struct se_cmd *cmd,
sense_reason_t (*exec_cmd)(struct se_cmd *cmd));
target: Add EXPORT_SYMBOL for existing se_dev_set_* Now that target_core_backend_configfs.h macros will be using these se_dev_set attribute functions externally to allow backend drivers to populate different attributes, go ahead and add EXPORT_SYMBOL() for the existing default set of 30 device attributes. Also update target_core_backend.h with proper function prototypes. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-11-28 06:15:48 +03:00
target: Return descriptor format sense data in case the LU spans 64bit sectors In case a LU spans 64bit sectors, fixed size sense data information field is only 32 bits which means the sector information will be truncated. Thus, if the LU spans 64bit sectors, use descriptor format sense data to correctly report sector information. Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-16 10:28:05 +03:00
bool target_sense_desc_format(struct se_device *dev);
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors In a couple places we are not converting to/from the Linux block layer 512 bytes sectors. 1. The request queue values and what we do are a mismatch of things: max_discard_sectors - This is in linux block layer 512 byte sectors. We are just copying this to max_unmap_lba_count. discard_granularity - This is in bytes. We are converting it to Linux block layer 512 byte sectors. discard_alignment - This is in bytes. We are just copying this over. The problem is that the core LIO code exports these values in spc_emulate_evpd_b0 and we use them to test request arguments in sbc_execute_unmap, but we never convert to the block size we export to the initiator. If we are not using 512 byte sectors then we are exporting the wrong values or are checks are off. And, for the discard_alignment/bytes case we are just plain messed up. 2. blkdev_issue_discard's start and number of sector arguments are supposed to be in linux block layer 512 byte sectors. We are currently passing in the values we get from the initiator which might be based on some other sector size. There is a similar problem in iblock_execute_write_same where the bio functions want values in 512 byte sectors but we are passing in what we got from the initiator. Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-01-18 23:09:27 +03:00
sector_t target_to_linux_sector(struct se_device *dev, sector_t lb);
bool target_configure_unmap_from_queue(struct se_dev_attrib *attrib,
struct request_queue *q, int block_size);
target: Return descriptor format sense data in case the LU spans 64bit sectors In case a LU spans 64bit sectors, fixed size sense data information field is only 32 bits which means the sector information will be truncated. Thus, if the LU spans 64bit sectors, use descriptor format sense data to correctly report sector information. Reported-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-07-16 10:28:05 +03:00
target: header reshuffle, part2 This reorganized the headers under include/target into: - target_core_base.h stays as is with all target-wide data stuctures and defines - target_core_backend.h contains the whole interface to I/O backends - target_core_fabric.h contains the whole interface to fabric modules Except for those only the various configfs macro headers stay around. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-11-16 18:46:48 +04:00
#endif /* TARGET_CORE_BACKEND_H */