microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/power/reset/Kconfig

121 строка
3.3 KiB
Plaintext
Исходник Обычный вид История

power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 12:51:04 +04:00
menuconfig POWER_RESET
bool "Board level reset or power off"
help
Provides a number of drivers which either reset a complete board
or shut it down, by manipulating the main power supply on the board.
Say Y here to enable board reset and power off
power: reset: Add as3722 power-off driver ams AS3722 supports the power off functionality to turn off system. This commit adds power off driver for ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-20 17:24:00 +04:00
config POWER_RESET_AS3722
bool "ams AS3722 power-off driver"
depends on MFD_AS3722 && POWER_RESET
help
This driver supports turning off board via a ams AS3722 power-off.
power: reset: Add Axxia system reset driver Add Axxia (AXM55xx) SoC system reset driver. This driver handles only system reboot (and not power-off). Signed-off-by: Anders Berg <anders.berg@lsi.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23 13:08:38 +04:00
config POWER_RESET_AXXIA
bool "LSI Axxia reset driver"
depends on POWER_RESET && ARCH_AXXIA
help
This driver supports restart for Axxia SoC.
Say Y if you have an Axxia family SoC.
power: reset: Add reboot driver for brcmstb Add support for reboot functionality on boards with ARM-based Broadcom STB chipsets. Make it built-in by default for ARCH_BRCMSTB, but allow it to be configurable under COMPILE_TEST. Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-07-23 03:48:03 +04:00
config POWER_RESET_BRCMSTB
bool "Broadcom STB reset driver" if COMPILE_TEST
depends on POWER_RESET && ARM
default ARCH_BRCMSTB
help
This driver provides restart support for ARM-based Broadcom STB
boards.
Say Y here if you have an ARM-based Broadcom STB board and you wish
to have restart support.
power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-11-17 12:51:04 +04:00
config POWER_RESET_GPIO
bool "GPIO power-off driver"
depends on OF_GPIO && POWER_RESET
help
This driver supports turning off your board via a GPIO line.
If your board needs a GPIO high/low to power down, say Y and
create a binding in your devicetree.
power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:09 +04:00
power: Add simple gpio-restart driver This driver registers a restart handler to set a GPIO line high/low to reset a board based on devicetree bindings. Signed-off-by: David Riley <davidriley@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-08-27 23:23:51 +04:00
config POWER_RESET_GPIO_RESTART
bool "GPIO restart driver"
depends on OF_GPIO && POWER_RESET
help
This driver supports restarting your board via a GPIO line.
If your board needs a GPIO high/low to restart, say Y and
create a binding in your devicetree.
power: reset: move hisilicon reboot code Move reboot code from hisilicon platform driver into reset driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Acked-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-13 13:11:28 +04:00
config POWER_RESET_HISI
bool "Hisilicon power-off driver"
depends on POWER_RESET && ARCH_HISI
help
Reboot support for Hisilicon boards.
power: reset: Add msm restart support Add support for restart and poweroff functionality present on MSM chipsets with the MPM2 ps-hold hardware. Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-07-31 04:05:28 +04:00
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
power: reset: msm - switch Kconfig to ARCH_QCOM depends We've split Qualcomm MSM support into legacy and multiplatform. The reset driver is only relevant on the multiplatform supported SoCs so switch the Kconfig depends to ARCH_QCOM. Acked-by: Dmitry Eremin-Solenikov Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-01-31 00:46:08 +04:00
depends on POWER_RESET && ARCH_QCOM
power: reset: Add msm restart support Add support for restart and poweroff functionality present on MSM chipsets with the MPM2 ps-hold hardware. Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-07-31 04:05:28 +04:00
help
Power off and restart support for Qualcomm boards.
power: reset: add LTC2952 poweroff driver This adds a driver for the LTC2952, an external power control chip, which signals the OS to shut down. Additionally this driver lets the kernel power down the board. Signed-off-by: René Moll <rene.moll@xsens.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-08-08 17:12:17 +04:00
config POWER_RESET_LTC2952
bool "LTC2952 PowerPath power-off driver"
depends on OF_GPIO && POWER_RESET
help
This driver supports an external powerdown trigger and board power
down via the LTC2952. Bindings are made in the device tree.
power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:09 +04:00
config POWER_RESET_QNAP
bool "QNAP power-off driver"
depends on OF_GPIO && POWER_RESET && PLAT_ORION
help
This driver supports turning off QNAP NAS devices by sending
commands to the microcontroller which controls the main power.
Say Y if you have a QNAP NAS.
power/reset: Add a new driver implementing 'power off by restarting' Some devices, Buffalo Linkstation LS-XHL and LS-CHLv2 for example, power-off by restarting to letting u-boot hold the SoC until the user presses a key. Add a generic driver to implement this. It binds a function to pm_power_off, which calls arm_pm_restart. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2012-12-28 16:25:11 +04:00
config POWER_RESET_RESTART
bool "Restart power-off driver"
depends on ARM
help
Some boards don't actually have the ability to power off.
Instead they restart, and u-boot holds the SoC until the
user presses a key. u-boot then boots into Linux.
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
power: reset: Add Allwinner A31 reset code That code used to be in the machine code, but it's more fit here with other restart hooks. That will allow to cleanup the machine directory, while waiting for a proper watchdog driver for the A31. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-05-07 06:44:20 +04:00
config POWER_RESET_SUN6I
bool "Allwinner A31 SoC reset driver"
depends on ARCH_SUNXI
depends on POWER_RESET
help
Reboot support for the Allwinner A31 SoCs.
power: reset: Add restart functionality for STiH41x platforms This driver adds the restart functionality for STiH415 and STiH416 platforms from STMicroelectronics. This driver registers an arm_pm_restart function to reset the platform. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-07-22 18:52:28 +04:00
config POWER_RESET_ST
bool "ST restart power-off driver"
depends on POWER_RESET && ARCH_STI
help
Power off and reset support for STMicroelectronics boards.
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
config POWER_RESET_VEXPRESS
power/reset: Make the vexpress driver optional on arm and arm64 The driver can be used on either arm or arm64 platforms, but the latter doesn't have any platform-specific configuration options, so it must be possible to manually enable the driver. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-10 19:12:01 +04:00
bool "ARM Versatile Express power-off and reset driver"
depends on ARM || ARM64
vexpress-poweroff: Should depend on the required infrastructure ARM Versatile Express reset driver requires platform-specific config infrastructure to be present in the kernel. When VEXPRESS_CONFIG is not selected, the build will fail like this: drivers/built-in.o: In function `vexpress_reset_do.clone.0': iio-trig-interrupt.c:(.text+0x1aff38): undefined reference to `__vexpress_config_func_get' iio-trig-interrupt.c:(.text+0x1aff4c): undefined reference to `vexpress_config_write' Added required dependency to the Kconfig entry. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-08-15 19:35:52 +04:00
depends on POWER_RESET && VEXPRESS_CONFIG
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-01-15 15:24:14 +04:00
help
Power off and reset support for the ARM Ltd. Versatile
Express boards.
power: Add APM X-Gene system reboot driver Add APM X-Gene SoC system reboot driver. This driver handles only system reboot. System shutdown is board specific and can be handled by board driver or GPIO based shutdown driver. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-07-03 00:38:58 +04:00
config POWER_RESET_XGENE
bool "APM SoC X-Gene reset driver"
depends on ARM64
depends on POWER_RESET
help
Reboot support for the APM SoC X-Gene Eval boards.
power: reset: keystone-reset: introduce keystone reset driver The keystone SoC can be rebooted in several ways. By external reset pin, by soft and by watchdogs. To allow keystone SoC reset if watchdog is triggered we have to enable it in reset mux configuration register regarding of watchdog configuration. Also we need to set soft/hard reset we are going to use. So add keystone reset driver to handle all this stuff. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-05-24 00:32:39 +04:00
config POWER_RESET_KEYSTONE
bool "Keystone reset driver"
depends on ARCH_KEYSTONE
select MFD_SYSCON
help
Reboot support for the KEYSTONE SoCs.