WSL2-Linux-Kernel/arch/powerpc/kernel/module_64.c

446 строки
13 KiB
C
Исходник Обычный вид История

/* Kernel module help for PPC64.
Copyright (C) 2001, 2003 Rusty Russell IBM Corporation.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/elf.h>
#include <linux/moduleloader.h>
#include <linux/err.h>
#include <linux/vmalloc.h>
#include <linux/bug.h>
#include <asm/module.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
#include <linux/sort.h>
#include "setup.h"
/* FIXME: We don't do .init separately. To do this, we'd need to have
a separate r2 value in the init and core section, and stub between
them, too.
Using a magic allocator which places modules within 32MB solves
this, and makes other things simpler. Anton?
--RR. */
#if 0
#define DEBUGP printk
#else
#define DEBUGP(fmt , ...)
#endif
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
the kernel itself). But on PPC64, these need to be used for every
jump, actually, to reset r2 (TOC+0x8000). */
struct ppc64_stub_entry
{
/* 28 byte jump instruction sequence (7 instructions) */
unsigned char jump[28];
unsigned char unused[4];
/* Data for the above code */
struct ppc64_opd_entry opd;
};
/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external)
function which may be more than 24-bits away. We could simply
patch the new r2 value and function pointer into the stub, but it's
significantly shorter to put these values at the end of the stub
code, and patch the stub address (32-bits relative to the TOC ptr,
r2) into the stub. */
static struct ppc64_stub_entry ppc64_stub =
{ .jump = {
0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, <high> */
0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, <low> */
/* Save current r2 value in magic place on the stack. */
0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */
0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */
0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */
0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */
0x4e, 0x80, 0x04, 0x20 /* bctr */
} };
/* Count how many different 24-bit relocations (different symbol,
different addend) */
static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
{
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
unsigned int i, r_info, r_addend, _count_relocs;
/* FIXME: Only count external ones --RR */
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
_count_relocs = 0;
r_info = 0;
r_addend = 0;
for (i = 0; i < num; i++)
/* Only count 24-bit relocs, others don't need stubs */
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
if (ELF64_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
(r_info != ELF64_R_SYM(rela[i].r_info) ||
r_addend != rela[i].r_addend)) {
_count_relocs++;
r_info = ELF64_R_SYM(rela[i].r_info);
r_addend = rela[i].r_addend;
}
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
return _count_relocs;
}
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
static int relacmp(const void *_x, const void *_y)
{
const Elf64_Rela *x, *y;
y = (Elf64_Rela *)_x;
x = (Elf64_Rela *)_y;
/* Compare the entire r_info (as opposed to ELF64_R_SYM(r_info) only) to
* make the comparison cheaper/faster. It won't affect the sorting or
* the counting algorithms' performance
*/
if (x->r_info < y->r_info)
return -1;
else if (x->r_info > y->r_info)
return 1;
else if (x->r_addend < y->r_addend)
return -1;
else if (x->r_addend > y->r_addend)
return 1;
else
return 0;
}
static void relaswap(void *_x, void *_y, int size)
{
uint64_t *x, *y, tmp;
int i;
y = (uint64_t *)_x;
x = (uint64_t *)_y;
for (i = 0; i < sizeof(Elf64_Rela) / sizeof(uint64_t); i++) {
tmp = x[i];
x[i] = y[i];
y[i] = tmp;
}
}
/* Get size of potential trampolines required. */
static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
const Elf64_Shdr *sechdrs)
{
/* One extra reloc so it's always 0-funcaddr terminated */
unsigned long relocs = 1;
unsigned i;
/* Every relocated section... */
for (i = 1; i < hdr->e_shnum; i++) {
if (sechdrs[i].sh_type == SHT_RELA) {
DEBUGP("Found relocations in section %u\n", i);
DEBUGP("Ptr: %p. Number: %lu\n",
(void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size / sizeof(Elf64_Rela));
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
/* Sort the relocation information based on a symbol and
* addend key. This is a stable O(n*log n) complexity
* alogrithm but it will reduce the complexity of
* count_relocs() to linear complexity O(n)
*/
sort((void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size / sizeof(Elf64_Rela),
sizeof(Elf64_Rela), relacmp, relaswap);
relocs += count_relocs((void *)sechdrs[i].sh_addr,
sechdrs[i].sh_size
/ sizeof(Elf64_Rela));
}
}
DEBUGP("Looks like a total of %lu stubs, max\n", relocs);
return relocs * sizeof(struct ppc64_stub_entry);
}
static void dedotify_versions(struct modversion_info *vers,
unsigned long size)
{
struct modversion_info *end;
for (end = (void *)vers + size; vers < end; vers++)
if (vers->name[0] == '.')
memmove(vers->name, vers->name+1, strlen(vers->name));
}
/* Undefined symbols which refer to .funcname, hack to funcname */
static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
{
unsigned int i;
for (i = 1; i < numsyms; i++) {
if (syms[i].st_shndx == SHN_UNDEF) {
char *name = strtab + syms[i].st_name;
if (name[0] == '.')
memmove(name, name+1, strlen(name));
}
}
}
int module_frob_arch_sections(Elf64_Ehdr *hdr,
Elf64_Shdr *sechdrs,
char *secstrings,
struct module *me)
{
unsigned int i;
/* Find .toc and .stubs sections, symtab and strtab */
for (i = 1; i < hdr->e_shnum; i++) {
char *p;
if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0)
me->arch.stubs_section = i;
else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0)
me->arch.toc_section = i;
else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0)
dedotify_versions((void *)hdr + sechdrs[i].sh_offset,
sechdrs[i].sh_size);
/* We don't handle .init for the moment: rename to _init */
while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init")))
p[0] = '_';
if (sechdrs[i].sh_type == SHT_SYMTAB)
dedotify((void *)hdr + sechdrs[i].sh_offset,
sechdrs[i].sh_size / sizeof(Elf64_Sym),
(void *)hdr
+ sechdrs[sechdrs[i].sh_link].sh_offset);
}
if (!me->arch.stubs_section) {
printk("%s: doesn't contain .stubs.\n", me->name);
return -ENOEXEC;
}
/* If we don't have a .toc, just use .stubs. We need to set r2
to some reasonable value in case the module calls out to
other functions via a stub, or if a function pointer escapes
the module by some means. */
if (!me->arch.toc_section)
me->arch.toc_section = me->arch.stubs_section;
/* Override the stubs size */
sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
return 0;
}
int apply_relocate(Elf64_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
unsigned int relsec,
struct module *me)
{
printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", me->name);
return -ENOEXEC;
}
/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this
gives the value maximum span in an instruction which uses a signed
offset) */
static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me)
{
return sechdrs[me->arch.toc_section].sh_addr + 0x8000;
}
/* Both low and high 16 bits are added as SIGNED additions, so if low
16 bits has high bit set, high 16 bits must be adjusted. These
macros do that (stolen from binutils). */
#define PPC_LO(v) ((v) & 0xffff)
#define PPC_HI(v) (((v) >> 16) & 0xffff)
#define PPC_HA(v) PPC_HI ((v) + 0x8000)
/* Patch stub to reference function and correct r2 value. */
static inline int create_stub(Elf64_Shdr *sechdrs,
struct ppc64_stub_entry *entry,
struct ppc64_opd_entry *opd,
struct module *me)
{
Elf64_Half *loc1, *loc2;
long reladdr;
*entry = ppc64_stub;
loc1 = (Elf64_Half *)&entry->jump[2];
loc2 = (Elf64_Half *)&entry->jump[6];
/* Stub uses address relative to r2. */
reladdr = (unsigned long)entry - my_r2(sechdrs, me);
if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) {
printk("%s: Address %p of stub out of range of %p.\n",
me->name, (void *)reladdr, (void *)my_r2);
return 0;
}
DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr);
*loc1 = PPC_HA(reladdr);
*loc2 = PPC_LO(reladdr);
entry->opd.funcaddr = opd->funcaddr;
entry->opd.r2 = opd->r2;
return 1;
}
/* Create stub to jump to function described in this OPD: we need the
stub to set up the TOC ptr (r2) for the function. */
static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
unsigned long opdaddr,
struct module *me)
{
struct ppc64_stub_entry *stubs;
struct ppc64_opd_entry *opd = (void *)opdaddr;
unsigned int i, num_stubs;
num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs);
/* Find this stub, or if that fails, the next avail. entry */
stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr;
for (i = 0; stubs[i].opd.funcaddr; i++) {
BUG_ON(i >= num_stubs);
if (stubs[i].opd.funcaddr == opd->funcaddr)
return (unsigned long)&stubs[i];
}
if (!create_stub(sechdrs, &stubs[i], opd, me))
return 0;
return (unsigned long)&stubs[i];
}
/* We expect a noop next: if it is, replace it with instruction to
restore r2. */
static int restore_r2(u32 *instruction, struct module *me)
{
if (*instruction != PPC_NOP_INSTR) {
printk("%s: Expect noop after relocate, got %08x\n",
me->name, *instruction);
return 0;
}
*instruction = 0xe8410028; /* ld r2,40(r1) */
return 1;
}
int apply_relocate_add(Elf64_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
unsigned int relsec,
struct module *me)
{
unsigned int i;
Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr;
Elf64_Sym *sym;
unsigned long *location;
unsigned long value;
DEBUGP("Applying ADD relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ rela[i].r_offset;
/* This is the symbol it is referring to */
sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
+ ELF64_R_SYM(rela[i].r_info);
DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n",
location, (long)ELF64_R_TYPE(rela[i].r_info),
strtab + sym->st_name, (unsigned long)sym->st_value,
(long)rela[i].r_addend);
/* `Everything is relative'. */
value = sym->st_value + rela[i].r_addend;
switch (ELF64_R_TYPE(rela[i].r_info)) {
case R_PPC64_ADDR32:
/* Simply set it */
*(u32 *)location = value;
break;
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
case R_PPC64_ADDR64:
/* Simply set it */
*(unsigned long *)location = value;
break;
case R_PPC64_TOC:
*(unsigned long *)location = my_r2(sechdrs, me);
break;
case R_PPC64_TOC16:
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if (value + 0x8000 > 0xffff) {
printk("%s: bad TOC16 relocation (%lu)\n",
me->name, value);
return -ENOEXEC;
}
*((uint16_t *) location)
= (*((uint16_t *) location) & ~0xffff)
| (value & 0xffff);
break;
case R_PPC64_TOC16_DS:
/* Subtract TOC pointer */
value -= my_r2(sechdrs, me);
if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
printk("%s: bad TOC16_DS relocation (%lu)\n",
me->name, value);
return -ENOEXEC;
}
*((uint16_t *) location)
= (*((uint16_t *) location) & ~0xfffc)
| (value & 0xfffc);
break;
case R_PPC_REL24:
/* FIXME: Handle weak symbols here --RR */
if (sym->st_shndx == SHN_UNDEF) {
/* External: go via stub */
value = stub_for_addr(sechdrs, value, me);
if (!value)
return -ENOENT;
if (!restore_r2((u32 *)location + 1, me))
return -ENOEXEC;
}
/* Convert value to relative */
value -= (unsigned long)location;
if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){
printk("%s: REL24 %li out of range!\n",
me->name, (long int)value);
return -ENOEXEC;
}
/* Only replace bits 2 through 26 */
[POWERPC] Optimize counting distinct entries in the relocation sections When a module has relocation sections with tens of thousands of entries, counting the distinct/unique entries only (i.e. no duplicates) at load time can take tens of seconds and up to minutes. The sore point is the count_relocs() function which is called as part of the architecture specific module loading processing path: -> load_module() generic -> module_frob_arch_sections() arch specific -> get_plt_size() 32-bit -> get_stubs_size() 64-bit -> count_relocs() Here count_relocs is being called to find out how many distinct targets of R_PPC_REL24 relocations there are, since each distinct target needs a PLT entry or a stub created for it. The previous counting algorithm has O(n^2) complexity. Basically two solutions were proposed on the e-mail list: a hash based approach and a sort based approach. The hash based approach is the fastest (O(n)) but the has it needs additional memory and for certain corner cases it could take lots of memory due to the degeneration of the hash. One such proposal was submitted here: http://ozlabs.org/pipermail/linuxppc-dev/2007-June/037641.html The sort based approach is slower (O(n * log n + n)) but if the sorting is done "in place" it doesn't need additional memory. This has O(n + n * log n) complexity with no additional memory requirements. This commit implements the in-place sort option. Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 19:24:04 +03:00
*(uint32_t *)location
= (*(uint32_t *)location & ~0x03fffffc)
| (value & 0x03fffffc);
break;
case R_PPC64_REL64:
/* 64 bits relative (used by features fixups) */
*location = value - (unsigned long)location;
break;
default:
printk("%s: Unknown ADD relocation: %lu\n",
me->name,
(unsigned long)ELF64_R_TYPE(rela[i].r_info));
return -ENOEXEC;
}
}
return 0;
}