WSL2-Linux-Kernel/kernel/kprobes.c

2914 строки
70 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Kernel Probes (KProbes)
* kernel/kprobes.c
*
* Copyright (C) IBM Corporation, 2002, 2004
*
* 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
* Probes initial implementation (includes suggestions from
* Rusty Russell).
* 2004-Aug Updated by Prasanna S Panchamukhi <prasanna@in.ibm.com> with
* hlists and exceptions notifier as suggested by Andi Kleen.
* 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
* interface to access function arguments.
* 2004-Sep Prasanna S Panchamukhi <prasanna@in.ibm.com> Changed Kprobes
* exceptions notifier to be first on the priority list.
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
* 2005-May Hien Nguyen <hien@us.ibm.com>, Jim Keniston
* <jkenisto@us.ibm.com> and Prasanna S Panchamukhi
* <prasanna@in.ibm.com> added function-return probes.
*/
#include <linux/kprobes.h>
#include <linux/hash.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/export.h>
#include <linux/moduleloader.h>
#include <linux/kallsyms.h>
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
#include <linux/freezer.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/sysctl.h>
#include <linux/kdebug.h>
#include <linux/memory.h>
#include <linux/ftrace.h>
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
#include <linux/cpu.h>
#include <linux/jump_label.h>
#include <linux/perf_event.h>
#include <linux/static_call.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>
#include <asm/errno.h>
#include <linux/uaccess.h>
#define KPROBE_HASH_BITS 6
#define KPROBE_TABLE_SIZE (1 << KPROBE_HASH_BITS)
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
static int kprobes_initialized;
/* kprobe_table can be accessed by
* - Normal hlist traversal and RCU add/del under kprobe_mutex is held.
* Or
* - RCU hlist traversal under disabling preempt (breakpoint handlers)
*/
static struct hlist_head kprobe_table[KPROBE_TABLE_SIZE];
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
static struct hlist_head kretprobe_inst_table[KPROBE_TABLE_SIZE];
/* NOTE: change this value only with kprobe_mutex held */
static bool kprobes_all_disarmed;
/* This protects kprobe_table and optimizing_list */
static DEFINE_MUTEX(kprobe_mutex);
static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL;
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
static struct {
raw_spinlock_t lock ____cacheline_aligned_in_smp;
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
} kretprobe_table_locks[KPROBE_TABLE_SIZE];
kprobe_opcode_t * __weak kprobe_lookup_name(const char *name,
unsigned int __unused)
{
return ((kprobe_opcode_t *)(kallsyms_lookup_name(name)));
}
static raw_spinlock_t *kretprobe_table_lock_ptr(unsigned long hash)
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
{
return &(kretprobe_table_locks[hash].lock);
}
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
/* Blacklist -- list of struct kprobe_blacklist_entry */
static LIST_HEAD(kprobe_blacklist);
#ifdef __ARCH_WANT_KPROBES_INSN_SLOT
/*
* kprobe->ainsn.insn points to the copy of the instruction to be
* single-stepped. x86_64, POWER4 and above have no-exec support and
* stepping on the instruction on a vmalloced/kmalloced/data page
* is a recipe for disaster
*/
struct kprobe_insn_page {
struct list_head list;
kprobe_opcode_t *insns; /* Page of instruction slots */
struct kprobe_insn_cache *cache;
int nused;
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
int ngarbage;
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
char slot_used[];
};
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
#define KPROBE_INSN_PAGE_SIZE(slots) \
(offsetof(struct kprobe_insn_page, slot_used) + \
(sizeof(char) * (slots)))
static int slots_per_page(struct kprobe_insn_cache *c)
{
return PAGE_SIZE/(c->insn_size * sizeof(kprobe_opcode_t));
}
enum kprobe_slot_state {
SLOT_CLEAN = 0,
SLOT_DIRTY = 1,
SLOT_USED = 2,
};
void __weak *alloc_insn_page(void)
{
return module_alloc(PAGE_SIZE);
}
void __weak free_insn_page(void *page)
{
module_memfree(page);
}
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
struct kprobe_insn_cache kprobe_insn_slots = {
.mutex = __MUTEX_INITIALIZER(kprobe_insn_slots.mutex),
.alloc = alloc_insn_page,
.free = free_insn_page,
.sym = KPROBE_INSN_PAGE_SYM,
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
.pages = LIST_HEAD_INIT(kprobe_insn_slots.pages),
.insn_size = MAX_INSN_SIZE,
.nr_garbage = 0,
};
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int collect_garbage_slots(struct kprobe_insn_cache *c);
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
/**
* __get_insn_slot() - Find a slot on an executable page for an instruction.
* We allocate an executable page if there's no room on existing ones.
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
kprobe_opcode_t *__get_insn_slot(struct kprobe_insn_cache *c)
{
struct kprobe_insn_page *kip;
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
kprobe_opcode_t *slot = NULL;
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
/* Since the slot array is not protected by rcu, we need a mutex */
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
mutex_lock(&c->mutex);
retry:
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
rcu_read_lock();
list_for_each_entry_rcu(kip, &c->pages, list) {
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
if (kip->nused < slots_per_page(c)) {
int i;
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
for (i = 0; i < slots_per_page(c); i++) {
if (kip->slot_used[i] == SLOT_CLEAN) {
kip->slot_used[i] = SLOT_USED;
kip->nused++;
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
slot = kip->insns + (i * c->insn_size);
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
rcu_read_unlock();
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
goto out;
}
}
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
/* kip->nused is broken. Fix it. */
kip->nused = slots_per_page(c);
WARN_ON(1);
}
}
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
rcu_read_unlock();
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
/* If there are any garbage slots, collect it and try again. */
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
if (c->nr_garbage && collect_garbage_slots(c) == 0)
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
goto retry;
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
/* All out of space. Need to allocate a new page. */
kip = kmalloc(KPROBE_INSN_PAGE_SIZE(slots_per_page(c)), GFP_KERNEL);
if (!kip)
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
goto out;
/*
* Use module_alloc so this page is within +/- 2GB of where the
* kernel image and loaded module images reside. This is required
* so x86_64 can correctly handle the %rip-relative fixups.
*/
kip->insns = c->alloc();
if (!kip->insns) {
kfree(kip);
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
goto out;
}
INIT_LIST_HEAD(&kip->list);
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
memset(kip->slot_used, SLOT_CLEAN, slots_per_page(c));
kip->slot_used[0] = SLOT_USED;
kip->nused = 1;
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
kip->ngarbage = 0;
kip->cache = c;
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
list_add_rcu(&kip->list, &c->pages);
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
slot = kip->insns;
/* Record the perf ksymbol register event after adding the page */
perf_event_ksymbol(PERF_RECORD_KSYMBOL_TYPE_OOL, (unsigned long)kip->insns,
PAGE_SIZE, false, c->sym);
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
out:
mutex_unlock(&c->mutex);
return slot;
}
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
/* Return 1 if all garbages are collected, otherwise 0. */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int collect_one_slot(struct kprobe_insn_page *kip, int idx)
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
{
kip->slot_used[idx] = SLOT_CLEAN;
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
kip->nused--;
if (kip->nused == 0) {
/*
* Page is no longer in use. Free it unless
* it's the last one. We keep the last one
* so as not to have to set it up again the
* next time somebody inserts a probe.
*/
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
if (!list_is_singular(&kip->list)) {
/*
* Record perf ksymbol unregister event before removing
* the page.
*/
perf_event_ksymbol(PERF_RECORD_KSYMBOL_TYPE_OOL,
(unsigned long)kip->insns, PAGE_SIZE, true,
kip->cache->sym);
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
list_del_rcu(&kip->list);
synchronize_rcu();
kip->cache->free(kip->insns);
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
kfree(kip);
}
return 1;
}
return 0;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int collect_garbage_slots(struct kprobe_insn_cache *c)
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
{
struct kprobe_insn_page *kip, *next;
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
/* Ensure no-one is interrupted on the garbages */
synchronize_rcu();
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
list_for_each_entry_safe(kip, next, &c->pages, list) {
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
int i;
if (kip->ngarbage == 0)
continue;
kip->ngarbage = 0; /* we will collect all garbages */
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
for (i = 0; i < slots_per_page(c); i++) {
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
if (kip->slot_used[i] == SLOT_DIRTY && collect_one_slot(kip, i))
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
break;
}
}
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
c->nr_garbage = 0;
[PATCH] kprobes: enable booster on the preemptible kernel When we are unregistering a kprobe-booster, we can't release its instruction buffer immediately on the preemptive kernel, because some processes might be preempted on the buffer. The freeze_processes() and thaw_processes() functions can clean most of processes up from the buffer. There are still some non-frozen threads who have the PF_NOFREEZE flag. If those threads are sleeping (not preempted) at the known place outside the buffer, we can ensure safety of freeing. However, the processing of this check routine takes a long time. So, this patch introduces the garbage collection mechanism of insn_slot. It also introduces the "dirty" flag to free_insn_slot because of efficiency. The "clean" instruction slots (dirty flag is cleared) are released immediately. But the "dirty" slots which are used by boosted kprobes, are marked as garbages. collect_garbage_slots() will be invoked to release "dirty" slots if there are more than INSNS_PER_PAGE garbage slots or if there are no unused slots. Cc: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: "bibo,mao" <bibo.mao@intel.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Yumiko Sugita <yumiko.sugita.yf@hitachi.com> Cc: Satoshi Oshima <soshima@redhat.com> Cc: Hideo Aoki <haoki@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 07:38:11 +03:00
return 0;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void __free_insn_slot(struct kprobe_insn_cache *c,
kprobe_opcode_t *slot, int dirty)
{
struct kprobe_insn_page *kip;
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
long idx;
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
mutex_lock(&c->mutex);
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
rcu_read_lock();
list_for_each_entry_rcu(kip, &c->pages, list) {
idx = ((long)slot - (long)kip->insns) /
(c->insn_size * sizeof(kprobe_opcode_t));
if (idx >= 0 && idx < slots_per_page(c))
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
goto out;
}
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
/* Could not find this slot. */
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
WARN_ON(1);
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
kip = NULL;
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
out:
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
rcu_read_unlock();
/* Mark and sweep: this may sleep */
if (kip) {
/* Check double free */
WARN_ON(kip->slot_used[idx] != SLOT_USED);
if (dirty) {
kip->slot_used[idx] = SLOT_DIRTY;
kip->ngarbage++;
if (++c->nr_garbage > slots_per_page(c))
collect_garbage_slots(c);
} else {
collect_one_slot(kip, idx);
}
}
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
mutex_unlock(&c->mutex);
kprobes: Introduce generic insn_slot framework Make insn_slot framework support various size slots. Current insn_slot just supports one-size instruction buffer slot. However, kprobes jump optimization needs larger size buffers. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133358.6725.82430.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
2010-02-25 16:33:59 +03:00
}
kprobes, extable: Identify kprobes trampolines as kernel text area Improve __kernel_text_address()/kernel_text_address() to return true if the given address is on a kprobe's instruction slot trampoline. This can help stacktraces to determine the address is on a text area or not. To implement this atomically in is_kprobe_*_slot(), also change the insn_cache page list to an RCU list. This changes timings a bit (it delays page freeing to the RCU garbage collection phase), but none of that is in the hot path. Note: this change can add small overhead to stack unwinders because it adds 2 additional checks to __kernel_text_address(). However, the impact should be very small, because kprobe_insn_pages list has 1 entry per 256 probes(on x86, on arm/arm64 it will be 1024 probes), and kprobe_optinsn_pages has 1 entry per 32 probes(on x86). In most use cases, the number of kprobe events may be less than 20, which means that is_kprobe_*_slot() will check just one entry. Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/148388747896.6869.6354262871751682264.stgit@devbox [ Improved the changelog and coding style. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-08 17:58:09 +03:00
/*
* Check given address is on the page of kprobe instruction slots.
* This will be used for checking whether the address on a stack
* is on a text area or not.
*/
bool __is_insn_slot_addr(struct kprobe_insn_cache *c, unsigned long addr)
{
struct kprobe_insn_page *kip;
bool ret = false;
rcu_read_lock();
list_for_each_entry_rcu(kip, &c->pages, list) {
if (addr >= (unsigned long)kip->insns &&
addr < (unsigned long)kip->insns + PAGE_SIZE) {
ret = true;
break;
}
}
rcu_read_unlock();
return ret;
}
int kprobe_cache_get_kallsym(struct kprobe_insn_cache *c, unsigned int *symnum,
unsigned long *value, char *type, char *sym)
{
struct kprobe_insn_page *kip;
int ret = -ERANGE;
rcu_read_lock();
list_for_each_entry_rcu(kip, &c->pages, list) {
if ((*symnum)--)
continue;
strlcpy(sym, c->sym, KSYM_NAME_LEN);
*type = 't';
*value = (unsigned long)kip->insns;
ret = 0;
break;
}
rcu_read_unlock();
return ret;
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
#ifdef CONFIG_OPTPROBES
/* For optimized_kprobe buffer */
kprobes: unify insn caches The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 01:24:11 +04:00
struct kprobe_insn_cache kprobe_optinsn_slots = {
.mutex = __MUTEX_INITIALIZER(kprobe_optinsn_slots.mutex),
.alloc = alloc_insn_page,
.free = free_insn_page,
.sym = KPROBE_OPTINSN_PAGE_SYM,
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
.pages = LIST_HEAD_INIT(kprobe_optinsn_slots.pages),
/* .insn_size is initialized later */
.nr_garbage = 0,
};
#endif
#endif
/* We have preemption disabled.. so it is safe to use __ versions */
static inline void set_kprobe_instance(struct kprobe *kp)
{
__this_cpu_write(kprobe_instance, kp);
}
static inline void reset_kprobe_instance(void)
{
__this_cpu_write(kprobe_instance, NULL);
}
/*
* This routine is called either:
* - under the kprobe_mutex - during kprobe_[un]register()
* OR
* - with preemption disabled - from arch/xxx/kernel/kprobes.c
*/
struct kprobe *get_kprobe(void *addr)
{
struct hlist_head *head;
struct kprobe *p;
head = &kprobe_table[hash_ptr(addr, KPROBE_HASH_BITS)];
hlist_for_each_entry_rcu(p, head, hlist,
lockdep_is_held(&kprobe_mutex)) {
if (p->addr == addr)
return p;
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
return NULL;
}
NOKPROBE_SYMBOL(get_kprobe);
static int aggr_pre_handler(struct kprobe *p, struct pt_regs *regs);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Return true if the kprobe is an aggregator */
static inline int kprobe_aggrprobe(struct kprobe *p)
{
return p->pre_handler == aggr_pre_handler;
}
/* Return true(!0) if the kprobe is unused */
static inline int kprobe_unused(struct kprobe *p)
{
return kprobe_aggrprobe(p) && kprobe_disabled(p) &&
list_empty(&p->list);
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/*
* Keep all fields in the kprobe consistent
*/
static inline void copy_kprobe(struct kprobe *ap, struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
memcpy(&p->opcode, &ap->opcode, sizeof(kprobe_opcode_t));
memcpy(&p->ainsn, &ap->ainsn, sizeof(struct arch_specific_insn));
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
#ifdef CONFIG_OPTPROBES
/* NOTE: change this value only with kprobe_mutex held */
static bool kprobes_allow_optimization;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/*
* Call all pre_handler on the list, but ignores its return value.
* This must be called from arch-dep optimized caller.
*/
void opt_pre_handler(struct kprobe *p, struct pt_regs *regs)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct kprobe *kp;
list_for_each_entry_rcu(kp, &p->list, list) {
if (kp->pre_handler && likely(!kprobe_disabled(kp))) {
set_kprobe_instance(kp);
kp->pre_handler(kp, regs);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
reset_kprobe_instance();
}
}
NOKPROBE_SYMBOL(opt_pre_handler);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Free optimized instructions and optimized_kprobe */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void free_aggr_kprobe(struct kprobe *p)
{
struct optimized_kprobe *op;
op = container_of(p, struct optimized_kprobe, kp);
arch_remove_optimized_kprobe(op);
arch_remove_kprobe(p);
kfree(op);
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Return true(!0) if the kprobe is ready for optimization. */
static inline int kprobe_optready(struct kprobe *p)
{
struct optimized_kprobe *op;
if (kprobe_aggrprobe(p)) {
op = container_of(p, struct optimized_kprobe, kp);
return arch_prepared_optinsn(&op->optinsn);
}
return 0;
}
/* Return true(!0) if the kprobe is disarmed. Note: p must be on hash list */
static inline int kprobe_disarmed(struct kprobe *p)
{
struct optimized_kprobe *op;
/* If kprobe is not aggr/opt probe, just return kprobe is disabled */
if (!kprobe_aggrprobe(p))
return kprobe_disabled(p);
op = container_of(p, struct optimized_kprobe, kp);
return kprobe_disabled(p) && list_empty(&op->list);
}
/* Return true(!0) if the probe is queued on (un)optimizing lists */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int kprobe_queued(struct kprobe *p)
{
struct optimized_kprobe *op;
if (kprobe_aggrprobe(p)) {
op = container_of(p, struct optimized_kprobe, kp);
if (!list_empty(&op->list))
return 1;
}
return 0;
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/*
* Return an optimized kprobe whose optimizing code replaces
* instructions including addr (exclude breakpoint).
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static struct kprobe *get_optimized_kprobe(unsigned long addr)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
int i;
struct kprobe *p = NULL;
struct optimized_kprobe *op;
/* Don't check i == 0, since that is a breakpoint case. */
for (i = 1; !p && i < MAX_OPTIMIZED_LENGTH; i++)
p = get_kprobe((void *)(addr - i));
if (p && kprobe_optready(p)) {
op = container_of(p, struct optimized_kprobe, kp);
if (arch_within_optimized_kprobe(op, addr))
return p;
}
return NULL;
}
/* Optimization staging list, protected by kprobe_mutex */
static LIST_HEAD(optimizing_list);
static LIST_HEAD(unoptimizing_list);
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
static LIST_HEAD(freeing_list);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
static void kprobe_optimizer(struct work_struct *work);
static DECLARE_DELAYED_WORK(optimizing_work, kprobe_optimizer);
#define OPTIMIZE_DELAY 5
/*
* Optimize (replace a breakpoint with a jump) kprobes listed on
* optimizing_list.
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void do_optimize_kprobes(void)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
kprobes: Fix potential deadlock in kprobe_optimizer() lockdep reports the following deadlock scenario: WARNING: possible circular locking dependency detected kworker/1:1/48 is trying to acquire lock: 000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290 but task is already holding lock: 00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (module_mutex){+.+.}: __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 set_all_modules_text_rw+0x22/0x90 ftrace_arch_code_modify_prepare+0x1c/0x20 ftrace_run_update_code+0xe/0x30 ftrace_startup_enable+0x2e/0x50 ftrace_startup+0xa7/0x100 register_ftrace_function+0x27/0x70 arm_kprobe+0xb3/0x130 enable_kprobe+0x83/0xa0 enable_trace_kprobe.part.0+0x2e/0x80 kprobe_register+0x6f/0xc0 perf_trace_event_init+0x16b/0x270 perf_kprobe_init+0xa7/0xe0 perf_kprobe_event_init+0x3e/0x70 perf_try_init_event+0x4a/0x140 perf_event_alloc+0x93a/0xde0 __do_sys_perf_event_open+0x19f/0xf30 __x64_sys_perf_event_open+0x20/0x30 do_syscall_64+0x65/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (text_mutex){+.+.}: __lock_acquire+0xfcb/0x1b60 lock_acquire+0xca/0x1d0 __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 kprobe_optimizer+0x163/0x290 process_one_work+0x22b/0x560 worker_thread+0x50/0x3c0 kthread+0x112/0x150 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(module_mutex); lock(text_mutex); lock(module_mutex); lock(text_mutex); *** DEADLOCK *** As a reproducer I've been using bcc's funccount.py (https://github.com/iovisor/bcc/blob/master/tools/funccount.py), for example: # ./funccount.py '*interrupt*' That immediately triggers the lockdep splat. Fix by acquiring text_mutex before module_mutex in kprobe_optimizer(). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d5b844a2cf50 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()") Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-12 21:43:02 +03:00
lockdep_assert_held(&text_mutex);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/*
* The optimization/unoptimization refers online_cpus via
* stop_machine() and cpu-hotplug modifies online_cpus.
* And same time, text_mutex will be held in cpu-hotplug and here.
* This combination can cause a deadlock (cpu-hotplug try to lock
* text_mutex but stop_machine can not be done because online_cpus
* has been changed)
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
* To avoid this deadlock, caller must have locked cpu hotplug
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
* for preventing cpu-hotplug outside of text_mutex locking.
*/
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
lockdep_assert_cpus_held();
/* Optimization never be done when disarmed */
if (kprobes_all_disarmed || !kprobes_allow_optimization ||
list_empty(&optimizing_list))
return;
arch_optimize_kprobes(&optimizing_list);
}
/*
* Unoptimize (replace a jump with a breakpoint and remove the breakpoint
* if need) kprobes listed on unoptimizing_list.
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void do_unoptimize_kprobes(void)
{
struct optimized_kprobe *op, *tmp;
kprobes: Fix potential deadlock in kprobe_optimizer() lockdep reports the following deadlock scenario: WARNING: possible circular locking dependency detected kworker/1:1/48 is trying to acquire lock: 000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290 but task is already holding lock: 00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (module_mutex){+.+.}: __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 set_all_modules_text_rw+0x22/0x90 ftrace_arch_code_modify_prepare+0x1c/0x20 ftrace_run_update_code+0xe/0x30 ftrace_startup_enable+0x2e/0x50 ftrace_startup+0xa7/0x100 register_ftrace_function+0x27/0x70 arm_kprobe+0xb3/0x130 enable_kprobe+0x83/0xa0 enable_trace_kprobe.part.0+0x2e/0x80 kprobe_register+0x6f/0xc0 perf_trace_event_init+0x16b/0x270 perf_kprobe_init+0xa7/0xe0 perf_kprobe_event_init+0x3e/0x70 perf_try_init_event+0x4a/0x140 perf_event_alloc+0x93a/0xde0 __do_sys_perf_event_open+0x19f/0xf30 __x64_sys_perf_event_open+0x20/0x30 do_syscall_64+0x65/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (text_mutex){+.+.}: __lock_acquire+0xfcb/0x1b60 lock_acquire+0xca/0x1d0 __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 kprobe_optimizer+0x163/0x290 process_one_work+0x22b/0x560 worker_thread+0x50/0x3c0 kthread+0x112/0x150 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(module_mutex); lock(text_mutex); lock(module_mutex); lock(text_mutex); *** DEADLOCK *** As a reproducer I've been using bcc's funccount.py (https://github.com/iovisor/bcc/blob/master/tools/funccount.py), for example: # ./funccount.py '*interrupt*' That immediately triggers the lockdep splat. Fix by acquiring text_mutex before module_mutex in kprobe_optimizer(). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d5b844a2cf50 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()") Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-12 21:43:02 +03:00
lockdep_assert_held(&text_mutex);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
/* See comment in do_optimize_kprobes() */
lockdep_assert_cpus_held();
/* Unoptimization must be done anytime */
if (list_empty(&unoptimizing_list))
return;
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list);
/* Loop free_list for disarming */
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
list_for_each_entry_safe(op, tmp, &freeing_list, list) {
kprobes: Set unoptimized flag after unoptimizing code Set the unoptimized flag after confirming the code is completely unoptimized. Without this fix, when a kprobe hits the intermediate modified instruction (the first byte is replaced by an INT3, but later bytes can still be a jump address operand) while unoptimizing, it can return to the middle byte of the modified code, which causes an invalid instruction exception in the kernel. Usually, this is a rare case, but if we put a probe on the function call while text patching, it always causes a kernel panic as below: # echo p text_poke+5 > kprobe_events # echo 1 > events/kprobes/enable # echo 0 > events/kprobes/enable invalid opcode: 0000 [#1] PREEMPT SMP PTI RIP: 0010:text_poke+0x9/0x50 Call Trace: arch_unoptimize_kprobe+0x22/0x28 arch_unoptimize_kprobes+0x39/0x87 kprobe_optimizer+0x6e/0x290 process_one_work+0x2a0/0x610 worker_thread+0x28/0x3d0 ? process_one_work+0x610/0x610 kthread+0x10d/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x3a/0x50 text_poke() is used for patching the code in optprobes. This can happen even if we blacklist text_poke() and other functions, because there is a small time window during which we show the intermediate code to other CPUs. [ mingo: Edited the changelog. ] Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: 6274de4984a6 ("kprobes: Support delayed unoptimizing") Link: https://lkml.kernel.org/r/157483422375.25881.13508326028469515760.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-27 08:57:04 +03:00
/* Switching from detour code to origin */
op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
/* Disarm probes if marked disabled */
if (kprobe_disabled(&op->kp))
arch_disarm_kprobe(&op->kp);
if (kprobe_unused(&op->kp)) {
/*
* Remove unused probes from hash list. After waiting
* for synchronization, these probes are reclaimed.
* (reclaiming is done by do_free_cleaned_kprobes.)
*/
hlist_del_rcu(&op->kp.hlist);
} else
list_del_init(&op->list);
}
}
/* Reclaim all kprobes on the free_list */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void do_free_cleaned_kprobes(void)
{
struct optimized_kprobe *op, *tmp;
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
list_for_each_entry_safe(op, tmp, &freeing_list, list) {
list_del_init(&op->list);
if (WARN_ON_ONCE(!kprobe_unused(&op->kp))) {
/*
* This must not happen, but if there is a kprobe
* still in use, keep it on kprobes hash list.
*/
continue;
}
free_aggr_kprobe(&op->kp);
}
}
/* Start optimizer after OPTIMIZE_DELAY passed */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void kick_kprobe_optimizer(void)
{
schedule_delayed_work(&optimizing_work, OPTIMIZE_DELAY);
}
/* Kprobe jump optimizer */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void kprobe_optimizer(struct work_struct *work)
{
mutex_lock(&kprobe_mutex);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
kprobes: Fix potential deadlock in kprobe_optimizer() lockdep reports the following deadlock scenario: WARNING: possible circular locking dependency detected kworker/1:1/48 is trying to acquire lock: 000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290 but task is already holding lock: 00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (module_mutex){+.+.}: __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 set_all_modules_text_rw+0x22/0x90 ftrace_arch_code_modify_prepare+0x1c/0x20 ftrace_run_update_code+0xe/0x30 ftrace_startup_enable+0x2e/0x50 ftrace_startup+0xa7/0x100 register_ftrace_function+0x27/0x70 arm_kprobe+0xb3/0x130 enable_kprobe+0x83/0xa0 enable_trace_kprobe.part.0+0x2e/0x80 kprobe_register+0x6f/0xc0 perf_trace_event_init+0x16b/0x270 perf_kprobe_init+0xa7/0xe0 perf_kprobe_event_init+0x3e/0x70 perf_try_init_event+0x4a/0x140 perf_event_alloc+0x93a/0xde0 __do_sys_perf_event_open+0x19f/0xf30 __x64_sys_perf_event_open+0x20/0x30 do_syscall_64+0x65/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (text_mutex){+.+.}: __lock_acquire+0xfcb/0x1b60 lock_acquire+0xca/0x1d0 __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 kprobe_optimizer+0x163/0x290 process_one_work+0x22b/0x560 worker_thread+0x50/0x3c0 kthread+0x112/0x150 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(module_mutex); lock(text_mutex); lock(module_mutex); lock(text_mutex); *** DEADLOCK *** As a reproducer I've been using bcc's funccount.py (https://github.com/iovisor/bcc/blob/master/tools/funccount.py), for example: # ./funccount.py '*interrupt*' That immediately triggers the lockdep splat. Fix by acquiring text_mutex before module_mutex in kprobe_optimizer(). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d5b844a2cf50 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()") Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-12 21:43:02 +03:00
mutex_lock(&text_mutex);
/*
* Step 1: Unoptimize kprobes and collect cleaned (unused and disarmed)
* kprobes before waiting for quiesence period.
*/
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
do_unoptimize_kprobes();
/*
* Step 2: Wait for quiesence period to ensure all potentially
* preempted tasks to have normally scheduled. Because optprobe
* may modify multiple instructions, there is a chance that Nth
* instruction is preempted. In that case, such tasks can return
* to 2nd-Nth byte of jump instruction. This wait is for avoiding it.
* Note that on non-preemptive kernel, this is transparently converted
* to synchronoze_sched() to wait for all interrupts to have completed.
*/
synchronize_rcu_tasks();
/* Step 3: Optimize kprobes after quiesence period */
do_optimize_kprobes();
/* Step 4: Free cleaned kprobes after quiesence period */
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
do_free_cleaned_kprobes();
kprobes: Fix potential deadlock in kprobe_optimizer() lockdep reports the following deadlock scenario: WARNING: possible circular locking dependency detected kworker/1:1/48 is trying to acquire lock: 000000008d7a62b2 (text_mutex){+.+.}, at: kprobe_optimizer+0x163/0x290 but task is already holding lock: 00000000850b5e2d (module_mutex){+.+.}, at: kprobe_optimizer+0x31/0x290 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (module_mutex){+.+.}: __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 set_all_modules_text_rw+0x22/0x90 ftrace_arch_code_modify_prepare+0x1c/0x20 ftrace_run_update_code+0xe/0x30 ftrace_startup_enable+0x2e/0x50 ftrace_startup+0xa7/0x100 register_ftrace_function+0x27/0x70 arm_kprobe+0xb3/0x130 enable_kprobe+0x83/0xa0 enable_trace_kprobe.part.0+0x2e/0x80 kprobe_register+0x6f/0xc0 perf_trace_event_init+0x16b/0x270 perf_kprobe_init+0xa7/0xe0 perf_kprobe_event_init+0x3e/0x70 perf_try_init_event+0x4a/0x140 perf_event_alloc+0x93a/0xde0 __do_sys_perf_event_open+0x19f/0xf30 __x64_sys_perf_event_open+0x20/0x30 do_syscall_64+0x65/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (text_mutex){+.+.}: __lock_acquire+0xfcb/0x1b60 lock_acquire+0xca/0x1d0 __mutex_lock+0xac/0x9f0 mutex_lock_nested+0x1b/0x20 kprobe_optimizer+0x163/0x290 process_one_work+0x22b/0x560 worker_thread+0x50/0x3c0 kthread+0x112/0x150 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(module_mutex); lock(text_mutex); lock(module_mutex); lock(text_mutex); *** DEADLOCK *** As a reproducer I've been using bcc's funccount.py (https://github.com/iovisor/bcc/blob/master/tools/funccount.py), for example: # ./funccount.py '*interrupt*' That immediately triggers the lockdep splat. Fix by acquiring text_mutex before module_mutex in kprobe_optimizer(). Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d5b844a2cf50 ("ftrace/x86: Remove possible deadlock between register_kprobe() and ftrace_run_update_code()") Link: http://lkml.kernel.org/r/20190812184302.GA7010@xps-13 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-08-12 21:43:02 +03:00
mutex_unlock(&text_mutex);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
/* Step 5: Kick optimizer again if needed */
if (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list))
kick_kprobe_optimizer();
mutex_unlock(&kprobe_mutex);
}
/* Wait for completing optimization and unoptimization */
void wait_for_kprobe_optimizer(void)
{
mutex_lock(&kprobe_mutex);
while (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list)) {
mutex_unlock(&kprobe_mutex);
/* this will also make optimizing_work execute immmediately */
flush_delayed_work(&optimizing_work);
/* @optimizing_work might not have been queued yet, relax */
cpu_relax();
mutex_lock(&kprobe_mutex);
}
mutex_unlock(&kprobe_mutex);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
static bool optprobe_queued_unopt(struct optimized_kprobe *op)
{
struct optimized_kprobe *_op;
list_for_each_entry(_op, &unoptimizing_list, list) {
if (op == _op)
return true;
}
return false;
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Optimize kprobe if p is ready to be optimized */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void optimize_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct optimized_kprobe *op;
/* Check if the kprobe is disabled or not ready for optimization. */
if (!kprobe_optready(p) || !kprobes_allow_optimization ||
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
(kprobe_disabled(p) || kprobes_all_disarmed))
return;
/* kprobes with post_handler can not be optimized */
if (p->post_handler)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
return;
op = container_of(p, struct optimized_kprobe, kp);
/* Check there is no other kprobes at the optimized instructions */
if (arch_check_optimized_kprobe(op) < 0)
return;
/* Check if it is already optimized. */
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
if (op->kp.flags & KPROBE_FLAG_OPTIMIZED) {
if (optprobe_queued_unopt(op)) {
/* This is under unoptimizing. Just dequeue the probe */
list_del_init(&op->list);
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
return;
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
op->kp.flags |= KPROBE_FLAG_OPTIMIZED;
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
/* On unoptimizing/optimizing_list, op must have OPTIMIZED flag */
if (WARN_ON_ONCE(!list_empty(&op->list)))
return;
list_add(&op->list, &optimizing_list);
kick_kprobe_optimizer();
}
/* Short cut to direct unoptimizing */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void force_unoptimize_kprobe(struct optimized_kprobe *op)
{
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
lockdep_assert_cpus_held();
arch_unoptimize_kprobe(op);
kprobes: Set unoptimized flag after unoptimizing code Set the unoptimized flag after confirming the code is completely unoptimized. Without this fix, when a kprobe hits the intermediate modified instruction (the first byte is replaced by an INT3, but later bytes can still be a jump address operand) while unoptimizing, it can return to the middle byte of the modified code, which causes an invalid instruction exception in the kernel. Usually, this is a rare case, but if we put a probe on the function call while text patching, it always causes a kernel panic as below: # echo p text_poke+5 > kprobe_events # echo 1 > events/kprobes/enable # echo 0 > events/kprobes/enable invalid opcode: 0000 [#1] PREEMPT SMP PTI RIP: 0010:text_poke+0x9/0x50 Call Trace: arch_unoptimize_kprobe+0x22/0x28 arch_unoptimize_kprobes+0x39/0x87 kprobe_optimizer+0x6e/0x290 process_one_work+0x2a0/0x610 worker_thread+0x28/0x3d0 ? process_one_work+0x610/0x610 kthread+0x10d/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x3a/0x50 text_poke() is used for patching the code in optprobes. This can happen even if we blacklist text_poke() and other functions, because there is a small time window during which we show the intermediate code to other CPUs. [ mingo: Edited the changelog. ] Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: 6274de4984a6 ("kprobes: Support delayed unoptimizing") Link: https://lkml.kernel.org/r/157483422375.25881.13508326028469515760.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-27 08:57:04 +03:00
op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
/* Unoptimize a kprobe if p is optimized */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void unoptimize_kprobe(struct kprobe *p, bool force)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct optimized_kprobe *op;
if (!kprobe_aggrprobe(p) || kprobe_disarmed(p))
return; /* This is not an optprobe nor optimized */
op = container_of(p, struct optimized_kprobe, kp);
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
if (!kprobe_optimized(p))
return;
if (!list_empty(&op->list)) {
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
if (optprobe_queued_unopt(op)) {
/* Queued in unoptimizing queue */
if (force) {
/*
* Forcibly unoptimize the kprobe here, and queue it
* in the freeing list for release afterwards.
*/
force_unoptimize_kprobe(op);
list_move(&op->list, &freeing_list);
}
} else {
/* Dequeue from the optimizing queue */
list_del_init(&op->list);
op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
}
return;
}
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
/* Optimized kprobe case */
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
if (force) {
/* Forcibly update the code: this is a special case */
force_unoptimize_kprobe(op);
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic optimize_kprobe() and unoptimize_kprobe() cancels if a given kprobe is on the optimizing_list or unoptimizing_list already. However, since the following commit: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") modified the update timing of the KPROBE_FLAG_OPTIMIZED, it doesn't work as expected anymore. The optimized_kprobe could be in the following states: - [optimizing]: Before inserting jump instruction op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [optimized]: jump inserted op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is empty. - [unoptimizing]: Before removing jump instruction (including unused optprobe) op.kp->flags has KPROBE_FLAG_OPTIMIZED and op->list is not empty. - [unoptimized]: jump removed op.kp->flags doesn't have KPROBE_FLAG_OPTIMIZED and op->list is empty. Current code mis-expects [unoptimizing] state doesn't have KPROBE_FLAG_OPTIMIZED, and that can cause incorrect results. To fix this, introduce optprobe_queued_unopt() to distinguish [optimizing] and [unoptimizing] states and fixes the logic in optimize_kprobe() and unoptimize_kprobe(). [ mingo: Cleaned up the changelog and the code a bit. ] Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Fixes: f66c0447cca1 ("kprobes: Set unoptimized flag after unoptimizing code") Link: https://lkml.kernel.org/r/157840814418.7181.13478003006386303481.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-07 17:42:24 +03:00
} else {
list_add(&op->list, &unoptimizing_list);
kick_kprobe_optimizer();
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
}
/* Cancel unoptimizing for reusing */
static int reuse_unused_kprobe(struct kprobe *ap)
{
struct optimized_kprobe *op;
/*
* Unused kprobe MUST be on the way of delayed unoptimizing (means
* there is still a relative jump) and disabled.
*/
op = container_of(ap, struct optimized_kprobe, kp);
WARN_ON_ONCE(list_empty(&op->list));
/* Enable the probe again */
ap->flags &= ~KPROBE_FLAG_DISABLED;
/* Optimize it again (remove from op->list) */
kprobes: Fix error check when reusing optimized probes The following commit introduced a bug in one of our error paths: 819319fc9346 ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") it missed to handle the return value of kprobe_optready() as error-value. In reality, the kprobe_optready() returns a bool result, so "true" case must be passed instead of 0. This causes some errors on kprobe boot-time selftests on ARM: [ ] Beginning kprobe tests... [ ] Probe ARM code [ ] kprobe [ ] kretprobe [ ] ARM instruction simulation [ ] Check decoding tables [ ] Run test cases [ ] FAIL: test_case_handler not run [ ] FAIL: Test andge r10, r11, r14, asr r7 [ ] FAIL: Scenario 11 ... [ ] FAIL: Scenario 7 [ ] Total instruction simulation tests=1631, pass=1433 fail=198 [ ] kprobe tests failed This can happen if an optimized probe is unregistered and next kprobe is registered on same address until the previous probe is not reclaimed. If this happens, a hidden aggregated probe may be kept in memory, and no new kprobe can probe same address. Also, in that case register_kprobe() will return "1" instead of minus error value, which can mislead caller logic. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v5.0+ Fixes: 819319fc9346 ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") Link: http://lkml.kernel.org/r/155530808559.32517.539898325433642204.stgit@devnote2 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-15 09:01:25 +03:00
if (!kprobe_optready(ap))
return -EINVAL;
optimize_kprobe(ap);
return 0;
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Remove optimized instructions */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void kill_optimized_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct optimized_kprobe *op;
op = container_of(p, struct optimized_kprobe, kp);
if (!list_empty(&op->list))
/* Dequeue from the (un)optimization queue */
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
list_del_init(&op->list);
op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
kprobes: Fix to free gone and unused optprobes Fix to free gone and unused optprobes. This bug will cause a kernel panic if the user reuses the killed and unused probe. Reported at: http://sourceware.org/ml/systemtap/2013-q2/msg00142.html In the normal path, an optprobe on an init function is unregistered when a module goes live. unregister_kprobe(kp) -> __unregister_kprobe_top ->__disable_kprobe ->disarm_kprobe(ap == op) ->__disarm_kprobe ->unoptimize_kprobe : the op is queued on unoptimizing_list and do nothing in __unregister_kprobe_bottom After a while (usually wait 5 jiffies), kprobe_optimizer runs to unoptimize and free optprobe. kprobe_optimizer ->do_unoptimize_kprobes ->arch_unoptimize_kprobes : moved to free_list ->do_free_cleaned_kprobes ->hlist_del: the op is removed ->free_aggr_kprobe ->arch_remove_optimized_kprobe ->arch_remove_kprobe ->kfree: the op is freed Here, if kprobes_module_callback is called and the delayed unoptimizing probe is picked BEFORE kprobe_optimizer runs, kprobes_module_callback ->kill_kprobe ->kill_optimized_kprobe : dequeued from unoptimizing_list <=!!! ->arch_remove_optimized_kprobe ->arch_remove_kprobe (but op is not freed, and on the kprobe hash table) This doesn't happen if the probe unregistration is done AFTER kprobes_module_callback is called (because at that time the op is gone), and kprobe-tracer does it. To fix this bug, this patch changes kprobes_module_callback to enqueue the op to freeing_list at kill_optimized_kprobe only if the op is unused. The unused probes on freeing_list will be freed in do_free_cleaned_kprobes. Note that this calls arch_remove_*kprobe twice on the same probe. Thus those functions have to check the double free. Fortunately, most of arch codes already checked that except for mips. This will be fixed in the next patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Timo Juhani Lindfors <timo.lindfors@iki.fi> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Cc: David S. Miller <davem@davemloft.net> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20130522093409.9084.63554.stgit@mhiramat-M0-7522 [ Minor edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-22 13:34:09 +04:00
if (kprobe_unused(p)) {
/* Enqueue if it is unused */
list_add(&op->list, &freeing_list);
/*
* Remove unused probes from the hash list. After waiting
* for synchronization, this probe is reclaimed.
* (reclaiming is done by do_free_cleaned_kprobes().)
*/
hlist_del_rcu(&op->kp.hlist);
}
/* Don't touch the code, because it is already freed. */
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
arch_remove_optimized_kprobe(op);
}
static inline
void __prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *p)
{
if (!kprobe_ftrace(p))
arch_prepare_optimized_kprobe(op, p);
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Try to prepare optimized instructions */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void prepare_optimized_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct optimized_kprobe *op;
op = container_of(p, struct optimized_kprobe, kp);
__prepare_optimized_kprobe(op, p);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
/* Allocate new optimized_kprobe and try to prepare optimized instructions */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static struct kprobe *alloc_aggr_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct optimized_kprobe *op;
op = kzalloc(sizeof(struct optimized_kprobe), GFP_KERNEL);
if (!op)
return NULL;
INIT_LIST_HEAD(&op->list);
op->kp.addr = p->addr;
__prepare_optimized_kprobe(op, p);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
return &op->kp;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void init_aggr_kprobe(struct kprobe *ap, struct kprobe *p);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/*
* Prepare an optimized_kprobe and optimize it
* NOTE: p must be a normal registered kprobe
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void try_to_optimize_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct kprobe *ap;
struct optimized_kprobe *op;
/* Impossible to optimize ftrace-based kprobe */
if (kprobe_ftrace(p))
return;
/* For preparing optimization, jump_label_text_reserved() is called */
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
jump_label_lock();
mutex_lock(&text_mutex);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
ap = alloc_aggr_kprobe(p);
if (!ap)
goto out;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
op = container_of(ap, struct optimized_kprobe, kp);
if (!arch_prepared_optinsn(&op->optinsn)) {
/* If failed to setup optimizing, fallback to kprobe */
arch_remove_optimized_kprobe(op);
kfree(op);
goto out;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
init_aggr_kprobe(ap, p);
optimize_kprobe(ap); /* This just kicks optimizer thread */
out:
mutex_unlock(&text_mutex);
jump_label_unlock();
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
#ifdef CONFIG_SYSCTL
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void optimize_all_kprobes(void)
{
struct hlist_head *head;
struct kprobe *p;
unsigned int i;
mutex_lock(&kprobe_mutex);
/* If optimization is already allowed, just return */
if (kprobes_allow_optimization)
goto out;
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
kprobes_allow_optimization = true;
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry(p, head, hlist)
if (!kprobe_disabled(p))
optimize_kprobe(p);
}
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
printk(KERN_INFO "Kprobes globally optimized\n");
out:
mutex_unlock(&kprobe_mutex);
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void unoptimize_all_kprobes(void)
{
struct hlist_head *head;
struct kprobe *p;
unsigned int i;
mutex_lock(&kprobe_mutex);
/* If optimization is already prohibited, just return */
if (!kprobes_allow_optimization) {
mutex_unlock(&kprobe_mutex);
return;
}
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
kprobes_allow_optimization = false;
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry(p, head, hlist) {
if (!kprobe_disabled(p))
unoptimize_kprobe(p, false);
}
}
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
mutex_unlock(&kprobe_mutex);
/* Wait for unoptimizing completion */
wait_for_kprobe_optimizer();
printk(KERN_INFO "Kprobes globally unoptimized\n");
}
static DEFINE_MUTEX(kprobe_sysctl_mutex);
int sysctl_kprobes_optimization;
int proc_kprobes_optimization_handler(struct ctl_table *table, int write,
void *buffer, size_t *length,
loff_t *ppos)
{
int ret;
mutex_lock(&kprobe_sysctl_mutex);
sysctl_kprobes_optimization = kprobes_allow_optimization ? 1 : 0;
ret = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (sysctl_kprobes_optimization)
optimize_all_kprobes();
else
unoptimize_all_kprobes();
mutex_unlock(&kprobe_sysctl_mutex);
return ret;
}
#endif /* CONFIG_SYSCTL */
/* Put a breakpoint for a probe. Must be called with text_mutex locked */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void __arm_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct kprobe *_p;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Check collision with other optimized kprobes */
_p = get_optimized_kprobe((unsigned long)p->addr);
if (unlikely(_p))
/* Fallback to unoptimized kprobe */
unoptimize_kprobe(_p, true);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
arch_arm_kprobe(p);
optimize_kprobe(p); /* Try to optimize (add kprobe to a list) */
}
/* Remove the breakpoint of a probe. Must be called with text_mutex locked */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void __disarm_kprobe(struct kprobe *p, bool reopt)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
struct kprobe *_p;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Try to unoptimize */
unoptimize_kprobe(p, kprobes_all_disarmed);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
if (!kprobe_queued(p)) {
arch_disarm_kprobe(p);
/* If another kprobe was blocked, optimize it. */
_p = get_optimized_kprobe((unsigned long)p->addr);
if (unlikely(_p) && reopt)
optimize_kprobe(_p);
}
/* TODO: reoptimize others after unoptimized this probe */
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
}
#else /* !CONFIG_OPTPROBES */
#define optimize_kprobe(p) do {} while (0)
#define unoptimize_kprobe(p, f) do {} while (0)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
#define kill_optimized_kprobe(p) do {} while (0)
#define prepare_optimized_kprobe(p) do {} while (0)
#define try_to_optimize_kprobe(p) do {} while (0)
#define __arm_kprobe(p) arch_arm_kprobe(p)
#define __disarm_kprobe(p, o) arch_disarm_kprobe(p)
#define kprobe_disarmed(p) kprobe_disabled(p)
#define wait_for_kprobe_optimizer() do {} while (0)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
static int reuse_unused_kprobe(struct kprobe *ap)
{
/*
* If the optimized kprobe is NOT supported, the aggr kprobe is
* released at the same time that the last aggregated kprobe is
* unregistered.
* Thus there should be no chance to reuse unused kprobe.
*/
printk(KERN_ERR "Error: There should be no unused kprobe here.\n");
return -EINVAL;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void free_aggr_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
arch_remove_kprobe(p);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
kfree(p);
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static struct kprobe *alloc_aggr_kprobe(struct kprobe *p)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
{
return kzalloc(sizeof(struct kprobe), GFP_KERNEL);
}
#endif /* CONFIG_OPTPROBES */
#ifdef CONFIG_KPROBES_ON_FTRACE
static struct ftrace_ops kprobe_ftrace_ops __read_mostly = {
.func = kprobe_ftrace_handler,
.flags = FTRACE_OPS_FL_SAVE_REGS,
};
static struct ftrace_ops kprobe_ipmodify_ops __read_mostly = {
.func = kprobe_ftrace_handler,
.flags = FTRACE_OPS_FL_SAVE_REGS | FTRACE_OPS_FL_IPMODIFY,
};
static int kprobe_ipmodify_enabled;
static int kprobe_ftrace_enabled;
/* Must ensure p->addr is really on ftrace */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int prepare_kprobe(struct kprobe *p)
{
if (!kprobe_ftrace(p))
return arch_prepare_kprobe(p);
return arch_prepare_kprobe_ftrace(p);
}
/* Caller must lock kprobe_mutex */
static int __arm_kprobe_ftrace(struct kprobe *p, struct ftrace_ops *ops,
int *cnt)
{
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
int ret = 0;
ret = ftrace_set_filter_ip(ops, (unsigned long)p->addr, 0, 0);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (ret) {
pr_debug("Failed to arm kprobe-ftrace at %pS (%d)\n",
p->addr, ret);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
return ret;
}
if (*cnt == 0) {
ret = register_ftrace_function(ops);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (ret) {
pr_debug("Failed to init kprobe-ftrace (%d)\n", ret);
goto err_ftrace;
}
}
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
(*cnt)++;
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
return ret;
err_ftrace:
/*
* At this point, sinec ops is not registered, we should be sefe from
* registering empty filter.
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
*/
ftrace_set_filter_ip(ops, (unsigned long)p->addr, 1, 0);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
return ret;
}
static int arm_kprobe_ftrace(struct kprobe *p)
{
bool ipmodify = (p->post_handler != NULL);
return __arm_kprobe_ftrace(p,
ipmodify ? &kprobe_ipmodify_ops : &kprobe_ftrace_ops,
ipmodify ? &kprobe_ipmodify_enabled : &kprobe_ftrace_enabled);
}
/* Caller must lock kprobe_mutex */
static int __disarm_kprobe_ftrace(struct kprobe *p, struct ftrace_ops *ops,
int *cnt)
{
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
int ret = 0;
if (*cnt == 1) {
ret = unregister_ftrace_function(ops);
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
if (WARN(ret < 0, "Failed to unregister kprobe-ftrace (%d)\n", ret))
return ret;
}
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
(*cnt)--;
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
ret = ftrace_set_filter_ip(ops, (unsigned long)p->addr, 1, 0);
WARN_ONCE(ret < 0, "Failed to disarm kprobe-ftrace at %pS (%d)\n",
p->addr, ret);
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
return ret;
}
static int disarm_kprobe_ftrace(struct kprobe *p)
{
bool ipmodify = (p->post_handler != NULL);
return __disarm_kprobe_ftrace(p,
ipmodify ? &kprobe_ipmodify_ops : &kprobe_ftrace_ops,
ipmodify ? &kprobe_ipmodify_enabled : &kprobe_ftrace_enabled);
}
#else /* !CONFIG_KPROBES_ON_FTRACE */
static inline int prepare_kprobe(struct kprobe *p)
{
return arch_prepare_kprobe(p);
}
static inline int arm_kprobe_ftrace(struct kprobe *p)
{
return -ENODEV;
}
static inline int disarm_kprobe_ftrace(struct kprobe *p)
{
return -ENODEV;
}
#endif
/* Arm a kprobe with text_mutex */
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
static int arm_kprobe(struct kprobe *kp)
{
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (unlikely(kprobe_ftrace(kp)))
return arm_kprobe_ftrace(kp);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
mutex_lock(&text_mutex);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
__arm_kprobe(kp);
mutex_unlock(&text_mutex);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
return 0;
}
/* Disarm a kprobe with text_mutex */
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
static int disarm_kprobe(struct kprobe *kp, bool reopt)
{
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
if (unlikely(kprobe_ftrace(kp)))
return disarm_kprobe_ftrace(kp);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
mutex_lock(&text_mutex);
__disarm_kprobe(kp, reopt);
mutex_unlock(&text_mutex);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
return 0;
}
/*
* Aggregate handlers for multiple kprobes support - these handlers
* take care of invoking the individual kprobe handlers on p->list
*/
static int aggr_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct kprobe *kp;
list_for_each_entry_rcu(kp, &p->list, list) {
if (kp->pre_handler && likely(!kprobe_disabled(kp))) {
set_kprobe_instance(kp);
if (kp->pre_handler(kp, regs))
return 1;
}
reset_kprobe_instance();
}
return 0;
}
NOKPROBE_SYMBOL(aggr_pre_handler);
static void aggr_post_handler(struct kprobe *p, struct pt_regs *regs,
unsigned long flags)
{
struct kprobe *kp;
list_for_each_entry_rcu(kp, &p->list, list) {
if (kp->post_handler && likely(!kprobe_disabled(kp))) {
set_kprobe_instance(kp);
kp->post_handler(kp, regs, flags);
reset_kprobe_instance();
}
}
}
NOKPROBE_SYMBOL(aggr_post_handler);
static int aggr_fault_handler(struct kprobe *p, struct pt_regs *regs,
int trapnr)
{
struct kprobe *cur = __this_cpu_read(kprobe_instance);
/*
* if we faulted "during" the execution of a user specified
* probe handler, invoke just that probe's fault handler
*/
if (cur && cur->fault_handler) {
if (cur->fault_handler(cur, regs, trapnr))
return 1;
}
return 0;
}
NOKPROBE_SYMBOL(aggr_fault_handler);
/* Walks the list and increments nmissed count for multiprobe case */
void kprobes_inc_nmissed_count(struct kprobe *p)
{
struct kprobe *kp;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
if (!kprobe_aggrprobe(p)) {
p->nmissed++;
} else {
list_for_each_entry_rcu(kp, &p->list, list)
kp->nmissed++;
}
return;
}
NOKPROBE_SYMBOL(kprobes_inc_nmissed_count);
static void recycle_rp_inst(struct kretprobe_instance *ri)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
{
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
struct kretprobe *rp = ri->rp;
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
/* remove rp inst off the rprobe_inst_table */
hlist_del(&ri->hlist);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
INIT_HLIST_NODE(&ri->hlist);
if (likely(rp)) {
raw_spin_lock(&rp->lock);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
hlist_add_head(&ri->hlist, &rp->free_instances);
raw_spin_unlock(&rp->lock);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
} else
kfree_rcu(ri, rcu);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
}
NOKPROBE_SYMBOL(recycle_rp_inst);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
static void kretprobe_hash_lock(struct task_struct *tsk,
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
struct hlist_head **head, unsigned long *flags)
__acquires(hlist_lock)
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
{
unsigned long hash = hash_ptr(tsk, KPROBE_HASH_BITS);
raw_spinlock_t *hlist_lock;
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
*head = &kretprobe_inst_table[hash];
hlist_lock = kretprobe_table_lock_ptr(hash);
raw_spin_lock_irqsave(hlist_lock, *flags);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
}
NOKPROBE_SYMBOL(kretprobe_hash_lock);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
static void kretprobe_table_lock(unsigned long hash,
unsigned long *flags)
__acquires(hlist_lock)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
{
raw_spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash);
raw_spin_lock_irqsave(hlist_lock, *flags);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
}
NOKPROBE_SYMBOL(kretprobe_table_lock);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
static void kretprobe_hash_unlock(struct task_struct *tsk,
unsigned long *flags)
__releases(hlist_lock)
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
{
unsigned long hash = hash_ptr(tsk, KPROBE_HASH_BITS);
raw_spinlock_t *hlist_lock;
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
hlist_lock = kretprobe_table_lock_ptr(hash);
raw_spin_unlock_irqrestore(hlist_lock, *flags);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
}
NOKPROBE_SYMBOL(kretprobe_hash_unlock);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
static void kretprobe_table_unlock(unsigned long hash,
unsigned long *flags)
__releases(hlist_lock)
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
{
raw_spinlock_t *hlist_lock = kretprobe_table_lock_ptr(hash);
raw_spin_unlock_irqrestore(hlist_lock, *flags);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
}
NOKPROBE_SYMBOL(kretprobe_table_unlock);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
static struct kprobe kprobe_busy = {
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2 Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-12 11:03:18 +03:00
.addr = (void *) get_kprobe,
};
void kprobe_busy_begin(void)
{
struct kprobe_ctlblk *kcb;
preempt_disable();
__this_cpu_write(current_kprobe, &kprobe_busy);
kcb = get_kprobe_ctlblk();
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
}
void kprobe_busy_end(void)
{
__this_cpu_write(current_kprobe, NULL);
preempt_enable();
}
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
/*
* This function is called from finish_task_switch when task tk becomes dead,
* so that we can recycle any function-return probe instances associated
* with this task. These left over instances represent probed functions
* that have been called but will never return.
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
*/
void kprobe_flush_task(struct task_struct *tk)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
{
struct kretprobe_instance *ri;
struct hlist_head *head;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
struct hlist_node *tmp;
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
unsigned long hash, flags = 0;
[PATCH] Return probe redesign: architecture independent changes The following is the second version of the function return probe patches I sent out earlier this week. Changes since my last submission include: * Fix in ppc64 code removing an unneeded call to re-enable preemption * Fix a build problem in ia64 when kprobes was turned off * Added another BUG_ON check to each of the architecture trampoline handlers My initial patch description ==> From my experiences with adding return probes to x86_64 and ia64, and the feedback on LKML to those patches, I think we can simplify the design for return probes. The following patch tweaks the original design such that: * Instead of storing the stack address in the return probe instance, the task pointer is stored. This gives us all we need in order to: - find the correct return probe instance when we enter the trampoline (even if we are recursing) - find all left-over return probe instances when the task is going away This has the side effect of simplifying the implementation since more work can be done in kernel/kprobes.c since architecture specific knowledge of the stack layout is no longer required. Specifically, we no longer have: - arch_get_kprobe_task() - arch_kprobe_flush_task() - get_rp_inst_tsk() - get_rp_inst() - trampoline_post_handler() <see next bullet> * Instead of splitting the return probe handling and cleanup logic across the pre and post trampoline handlers, all the work is pushed into the pre function (trampoline_probe_handler), and then we skip single stepping the original function. In this case the original instruction to be single stepped was just a NOP, and we can do without the extra interruption. The new flow of events to having a return probe handler execute when a target function exits is: * At system initialization time, a kprobe is inserted at the beginning of kretprobe_trampoline. kernel/kprobes.c use to handle this on it's own, but ia64 needed to do this a little differently (i.e. a function pointer is really a pointer to a structure containing the instruction pointer and a global pointer), so I added the notion of arch_init(), so that kernel/kprobes.c:init_kprobes() now allows architecture specific initialization by calling arch_init() before exiting. Each architecture now registers a kprobe on it's own trampoline function. * register_kretprobe() will insert a kprobe at the beginning of the targeted function with the kprobe pre_handler set to arch_prepare_kretprobe (still no change) * When the target function is entered, the kprobe is fired, calling arch_prepare_kretprobe (still no change) * In arch_prepare_kretprobe() we try to get a free instance and if one is available then we fill out the instance with a pointer to the return probe, the original return address, and a pointer to the task structure (instead of the stack address.) Just like before we change the return address to the trampoline function and mark the instance as used. If multiple return probes are registered for a given target function, then arch_prepare_kretprobe() will get called multiple times for the same task (since our kprobe implementation is able to handle multiple kprobes at the same address.) Past the first call to arch_prepare_kretprobe, we end up with the original address stored in the return probe instance pointing to our trampoline function. (This is a significant difference from the original arch_prepare_kretprobe design.) * Target function executes like normal and then returns to kretprobe_trampoline. * kprobe inserted on the first instruction of kretprobe_trampoline is fired and calls trampoline_probe_handler() (no change here) * trampoline_probe_handler() consumes each of the instances associated with the current task by calling the registered handler function and marking the instance as unused until an instance is found that has a return address different then the trampoline function. (change similar to my previous ia64 RFC) * If the task is killed with some left-over return probe instances (meaning that a target function was entered, but never returned), then we just free any instances associated with the task. (Not much different other then we can handle this without calling architecture specific functions.) There is a known problem that this patch does not yet solve where registering a return probe flush_old_exec or flush_thread will put us in a bad state. Most likely the best way to handle this is to not allow registering return probes on these two functions. (Significant change) This patch series applies to the 2.6.12-rc6-mm1 kernel, and provides: * kernel/kprobes.c changes * i386 patch of existing return probes implementation * x86_64 patch of existing return probe implementation * ia64 implementation * ppc64 implementation (provided by Ananth) This patch implements the architecture independant changes for a reworking of the kprobes based function return probes design. Changes include: * Removing functions for querying a return probe instance off a stack address * Removing the stack_addr field from the kretprobe_instance definition, and adding a task pointer * Adding architecture specific initialization via arch_init() * Removing extern definitions for the architecture trampoline functions (this isn't needed anymore since the architecture handles the initialization of the kprobe in the return probe trampoline function.) Signed-off-by: Rusty Lynch <rusty.lynch@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 02:17:08 +04:00
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
if (unlikely(!kprobes_initialized))
/* Early boot. kretprobe_table_locks not yet initialized. */
return;
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2 Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-12 11:03:18 +03:00
kprobe_busy_begin();
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
hash = hash_ptr(tk, KPROBE_HASH_BITS);
head = &kretprobe_inst_table[hash];
kretprobe_table_lock(hash, &flags);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
hlist_for_each_entry_safe(ri, tmp, head, hlist) {
if (ri->task == tk)
recycle_rp_inst(ri);
}
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
kretprobe_table_unlock(hash, &flags);
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave. My test was also able to trigger lockdep output: ============================================ WARNING: possible recursive locking detected 5.6.0-rc6+ #6 Not tainted -------------------------------------------- sched-messaging/2767 is trying to acquire lock: ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0 but task is already holding lock: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(kretprobe_table_locks[i].lock)); lock(&(kretprobe_table_locks[i].lock)); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by sched-messaging/2767: #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50 stack backtrace: CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6 Call Trace: dump_stack+0x96/0xe0 __lock_acquire.cold.57+0x173/0x2b7 ? native_queued_spin_lock_slowpath+0x42b/0x9e0 ? lockdep_hardirqs_on+0x590/0x590 ? __lock_acquire+0xf63/0x4030 lock_acquire+0x15a/0x3d0 ? kretprobe_hash_lock+0x52/0xa0 _raw_spin_lock_irqsave+0x36/0x70 ? kretprobe_hash_lock+0x52/0xa0 kretprobe_hash_lock+0x52/0xa0 trampoline_handler+0xf8/0x940 ? kprobe_fault_handler+0x380/0x380 ? find_held_lock+0x3a/0x1c0 kretprobe_trampoline+0x25/0x50 ? lock_acquired+0x392/0xbc0 ? _raw_spin_lock_irqsave+0x50/0x70 ? __get_valid_kprobe+0x1f0/0x1f0 ? _raw_spin_unlock_irqrestore+0x3b/0x40 ? finish_task_switch+0x4b9/0x6d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 The code within the kretprobe handler checks for probe reentrancy, so we won't trigger any _raw_spin_lock_irqsave probe in there. The problem is in outside kprobe_flush_task, where we call: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave where _raw_spin_lock_irqsave triggers the kretprobe and installs kretprobe_trampoline handler on _raw_spin_lock_irqsave return. The kretprobe_trampoline handler is then executed with already locked kretprobe_table_locks, and first thing it does is to lock kretprobe_table_locks ;-) the whole lockup path like: kprobe_flush_task kretprobe_table_lock raw_spin_lock_irqsave _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed ---> kretprobe_table_locks locked kretprobe_trampoline trampoline_handler kretprobe_hash_lock(current, &head, &flags); <--- deadlock Adding kprobe_busy_begin/end helpers that mark code with fake probe installed to prevent triggering of another kprobe within this code. Using these helpers in kprobe_flush_task, so the probe recursion protection check is hit and the probe is never set to prevent above lockup. Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2 Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Gustavo A . R . Silva" <gustavoars@kernel.org> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Reported-by: "Ziqian SUN (Zamir)" <zsun@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-05-12 11:03:18 +03:00
kprobe_busy_end();
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
}
NOKPROBE_SYMBOL(kprobe_flush_task);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
static inline void free_rp_inst(struct kretprobe *rp)
{
struct kretprobe_instance *ri;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
struct hlist_node *next;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
hlist_for_each_entry_safe(ri, next, &rp->free_instances, hlist) {
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
hlist_del(&ri->hlist);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
kfree(ri);
}
}
static void cleanup_rp_inst(struct kretprobe *rp)
{
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
unsigned long flags, hash;
struct kretprobe_instance *ri;
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
struct hlist_node *next;
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
struct hlist_head *head;
/* To avoid recursive kretprobe by NMI, set kprobe busy here */
kprobe_busy_begin();
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
for (hash = 0; hash < KPROBE_TABLE_SIZE; hash++) {
kretprobe_table_lock(hash, &flags);
head = &kretprobe_inst_table[hash];
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
hlist_for_each_entry_safe(ri, next, head, hlist) {
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
if (ri->rp == rp)
ri->rp = NULL;
}
kretprobe_table_unlock(hash, &flags);
}
kprobe_busy_end();
free_rp_inst(rp);
}
NOKPROBE_SYMBOL(cleanup_rp_inst);
/* Add the new probe to ap->list */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int add_new_kprobe(struct kprobe *ap, struct kprobe *p)
{
if (p->post_handler)
unoptimize_kprobe(ap, true); /* Fall back to normal kprobe */
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
list_add_rcu(&p->list, &ap->list);
if (p->post_handler && !ap->post_handler)
ap->post_handler = aggr_post_handler;
return 0;
}
/*
* Fill in the required fields of the "manager kprobe". Replace the
* earlier kprobe in the hlist with the manager kprobe
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void init_aggr_kprobe(struct kprobe *ap, struct kprobe *p)
{
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Copy p's insn slot to ap */
copy_kprobe(p, ap);
flush_insn_slot(ap);
ap->addr = p->addr;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
ap->flags = p->flags & ~KPROBE_FLAG_OPTIMIZED;
ap->pre_handler = aggr_pre_handler;
ap->fault_handler = aggr_fault_handler;
/* We don't care the kprobe which has gone. */
if (p->post_handler && !kprobe_gone(p))
ap->post_handler = aggr_post_handler;
INIT_LIST_HEAD(&ap->list);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
INIT_HLIST_NODE(&ap->hlist);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
list_add_rcu(&p->list, &ap->list);
hlist_replace_rcu(&p->hlist, &ap->hlist);
}
/*
* This is the second or subsequent kprobe at the address - handle
* the intricacies
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int register_aggr_kprobe(struct kprobe *orig_p, struct kprobe *p)
{
int ret = 0;
struct kprobe *ap = orig_p;
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
/* For preparing optimization, jump_label_text_reserved() is called */
jump_label_lock();
mutex_lock(&text_mutex);
if (!kprobe_aggrprobe(orig_p)) {
/* If orig_p is not an aggr_kprobe, create new aggr_kprobe. */
ap = alloc_aggr_kprobe(orig_p);
if (!ap) {
ret = -ENOMEM;
goto out;
}
init_aggr_kprobe(ap, orig_p);
} else if (kprobe_unused(ap)) {
/* This probe is going to die. Rescue it */
ret = reuse_unused_kprobe(ap);
if (ret)
goto out;
}
if (kprobe_gone(ap)) {
/*
* Attempting to insert new probe at the same location that
* had a probe in the module vaddr area which already
* freed. So, the instruction slot has already been
* released. We need a new slot for the new probe.
*/
ret = arch_prepare_kprobe(ap);
if (ret)
/*
* Even if fail to allocate new slot, don't need to
* free aggr_probe. It will be used next time, or
* freed by unregister_kprobe.
*/
goto out;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Prepare optimized instructions if possible. */
prepare_optimized_kprobe(ap);
/*
* Clear gone flag to prevent allocating new slot again, and
* set disabled flag because it is not armed yet.
*/
ap->flags = (ap->flags & ~KPROBE_FLAG_GONE)
| KPROBE_FLAG_DISABLED;
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Copy ap's insn slot to p */
copy_kprobe(ap, p);
ret = add_new_kprobe(ap, p);
out:
mutex_unlock(&text_mutex);
jump_label_unlock();
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
if (ret == 0 && kprobe_disabled(ap) && !kprobe_disabled(p)) {
ap->flags &= ~KPROBE_FLAG_DISABLED;
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (!kprobes_all_disarmed) {
/* Arm the breakpoint again. */
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
ret = arm_kprobe(ap);
if (ret) {
ap->flags |= KPROBE_FLAG_DISABLED;
list_del_rcu(&p->list);
synchronize_rcu();
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
}
}
}
return ret;
}
bool __weak arch_within_kprobe_blacklist(unsigned long addr)
{
/* The __kprobes marked functions and entry code must not be probed */
return addr >= (unsigned long)__kprobes_text_start &&
addr < (unsigned long)__kprobes_text_end;
}
static bool __within_kprobe_blacklist(unsigned long addr)
{
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
struct kprobe_blacklist_entry *ent;
if (arch_within_kprobe_blacklist(addr))
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
return true;
/*
* If there exists a kprobe_blacklist, verify and
* fail any probe registration in the prohibited area
*/
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
list_for_each_entry(ent, &kprobe_blacklist, list) {
if (addr >= ent->start_addr && addr < ent->end_addr)
return true;
}
return false;
}
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
bool within_kprobe_blacklist(unsigned long addr)
{
char symname[KSYM_NAME_LEN], *p;
if (__within_kprobe_blacklist(addr))
return true;
/* Check if the address is on a suffixed-symbol */
if (!lookup_symbol_name(addr, symname)) {
p = strchr(symname, '.');
if (!p)
return false;
*p = '\0';
addr = (unsigned long)kprobe_lookup_name(symname, 0);
if (addr)
return __within_kprobe_blacklist(addr);
}
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
return false;
}
/*
* If we have a symbol_name argument, look it up and add the offset field
* to it. This way, we can specify a relative address to a symbol.
* This returns encoded errors if it fails to look up symbol or invalid
* combination of parameters.
*/
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
static kprobe_opcode_t *_kprobe_addr(kprobe_opcode_t *addr,
const char *symbol_name, unsigned int offset)
{
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
if ((symbol_name && addr) || (!symbol_name && !addr))
goto invalid;
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
if (symbol_name) {
powerpc updates for 4.12 part 1. Highlights include: - Larger virtual address space on 64-bit server CPUs. By default we use a 128TB virtual address space, but a process can request access to the full 512TB by passing a hint to mmap(). - Support for the new Power9 "XIVE" interrupt controller. - TLB flushing optimisations for the radix MMU on Power9. - Support for CAPI cards on Power9, using the "Coherent Accelerator Interface Architecture 2.0". - The ability to configure the mmap randomisation limits at build and runtime. - Several small fixes and cleanups to the kprobes code, as well as support for KPROBES_ON_FTRACE. - Major improvements to handling of system reset interrupts, correctly treating them as NMIs, giving them a dedicated stack and using a new hypervisor call to trigger them, all of which should aid debugging and robustness. Many fixes and other minor enhancements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZDHUMAAoJEFHr6jzI4aWAT7oQALkE2Nj3gjcn1z0SkFhq/1iO Py9Elmqm4E+L6NKYtBY5dS8xVAJ088ffzERyqJ1FY1LHkB8tn8bWRcMQmbjAFzTI V4TAzDNI890BN/F4ptrYRwNFxRBHAvZ4NDunTzagwYnwmTzW9PYHmOi4pvWTo3Tw KFUQ0joLSEgHzyfXxYB3fyj41u8N0FZvhfazdNSqia2Y5Vwwv/ION5jKplDM+09Y EtVEXFvaKAS1sjbM/d/Jo5rblHfR0D9/lYV10+jjyIokjzslIpyTbnj3izeYoM5V I4h99372zfsEjBGPPXyM3khL3zizGMSDYRmJHQSaKxjtecS9SPywPTZ8ufO/aSzV Ngq6nlND+f1zep29VQ0cxd3Jh40skWOXzxJaFjfDT25xa6FbfsWP2NCtk8PGylZ7 EyqTuCWkMgIP02KlX3oHvEB2LRRPCDmRU2zECecRGNJrIQwYC2xjoiVi7Q8Qe8rY gr7Ib5Jj/a+uiTcCIy37+5nXq2s14/JBOKqxuYZIxeuZFvKYuRUipbKWO05WDOAz m/pSzeC3J8AAoYiqR0gcSOuJTOnJpGhs7zrQFqnEISbXIwLW+ICumzOmTAiBqOEY Rt8uW2gYkPwKLrE05445RfVUoERaAjaE06eRMOWS6slnngHmmnRJbf3PcoALiJkT ediqGEj0/N1HMB31V5tS =vSF3 -----END PGP SIGNATURE----- Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Larger virtual address space on 64-bit server CPUs. By default we use a 128TB virtual address space, but a process can request access to the full 512TB by passing a hint to mmap(). - Support for the new Power9 "XIVE" interrupt controller. - TLB flushing optimisations for the radix MMU on Power9. - Support for CAPI cards on Power9, using the "Coherent Accelerator Interface Architecture 2.0". - The ability to configure the mmap randomisation limits at build and runtime. - Several small fixes and cleanups to the kprobes code, as well as support for KPROBES_ON_FTRACE. - Major improvements to handling of system reset interrupts, correctly treating them as NMIs, giving them a dedicated stack and using a new hypervisor call to trigger them, all of which should aid debugging and robustness. - Many fixes and other minor enhancements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi" * tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits) powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it powerpc/powernv: Fix TCE kill on NVLink2 powerpc/mm/radix: Drop support for CPUs without lockless tlbie powerpc/book3s/mce: Move add_taint() later in virtual mode powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body powerpc/smp: Document irq enable/disable after migrating IRQs powerpc/mpc52xx: Don't select user-visible RTAS_PROC powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset() powerpc/eeh: Clean up and document event handling functions powerpc/eeh: Avoid use after free in eeh_handle_special_event() cxl: Mask slice error interrupts after first occurrence cxl: Route eeh events to all drivers in cxl_pci_error_detected() cxl: Force context lock during EEH flow powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST powerpc/xmon: Teach xmon oops about radix vectors powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids powerpc/pseries: Enable VFIO powerpc/powernv: Fix iommu table size calculation hook for small tables powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc powerpc: Add arch/powerpc/tools directory ...
2017-05-05 21:36:44 +03:00
addr = kprobe_lookup_name(symbol_name, offset);
if (!addr)
return ERR_PTR(-ENOENT);
}
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
addr = (kprobe_opcode_t *)(((char *)addr) + offset);
if (addr)
return addr;
invalid:
return ERR_PTR(-EINVAL);
}
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
static kprobe_opcode_t *kprobe_addr(struct kprobe *p)
{
return _kprobe_addr(p->addr, p->symbol_name, p->offset);
}
/* Check passed kprobe is valid and return kprobe in kprobe_table. */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static struct kprobe *__get_valid_kprobe(struct kprobe *p)
{
struct kprobe *ap, *list_p;
lockdep_assert_held(&kprobe_mutex);
ap = get_kprobe(p->addr);
if (unlikely(!ap))
return NULL;
if (p != ap) {
list_for_each_entry(list_p, &ap->list, list)
if (list_p == p)
/* kprobe p is a valid probe */
goto valid;
return NULL;
}
valid:
return ap;
}
/* Return error if the kprobe is being re-registered */
static inline int check_kprobe_rereg(struct kprobe *p)
{
int ret = 0;
mutex_lock(&kprobe_mutex);
if (__get_valid_kprobe(p))
ret = -EINVAL;
mutex_unlock(&kprobe_mutex);
return ret;
}
int __weak arch_check_ftrace_location(struct kprobe *p)
{
unsigned long ftrace_addr;
ftrace_addr = ftrace_location((unsigned long)p->addr);
if (ftrace_addr) {
#ifdef CONFIG_KPROBES_ON_FTRACE
/* Given address is not on the instruction boundary */
if ((unsigned long)p->addr != ftrace_addr)
return -EILSEQ;
p->flags |= KPROBE_FLAG_FTRACE;
#else /* !CONFIG_KPROBES_ON_FTRACE */
return -EINVAL;
#endif
}
return 0;
}
static int check_kprobe_address_safe(struct kprobe *p,
struct module **probed_mod)
{
int ret;
ret = arch_check_ftrace_location(p);
if (ret)
return ret;
jump_label_lock();
preempt_disable();
/* Ensure it is not in reserved area nor out of text */
if (!kernel_text_address((unsigned long) p->addr) ||
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
within_kprobe_blacklist((unsigned long) p->addr) ||
jump_label_text_reserved(p->addr, p->addr) ||
static_call_text_reserved(p->addr, p->addr) ||
find_bug((unsigned long)p->addr)) {
ret = -EINVAL;
goto out;
}
/* Check if are we probing a module */
*probed_mod = __module_text_address((unsigned long) p->addr);
if (*probed_mod) {
/*
* We must hold a refcount of the probed module while updating
* its code to prohibit unexpected unloading.
*/
if (unlikely(!try_module_get(*probed_mod))) {
ret = -ENOENT;
goto out;
}
/*
* If the module freed .init.text, we couldn't insert
* kprobes in there.
*/
if (within_module_init((unsigned long)p->addr, *probed_mod) &&
(*probed_mod)->state != MODULE_STATE_COMING) {
module_put(*probed_mod);
*probed_mod = NULL;
ret = -ENOENT;
}
}
out:
preempt_enable();
jump_label_unlock();
return ret;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int register_kprobe(struct kprobe *p)
{
int ret;
struct kprobe *old_p;
struct module *probed_mod;
kprobe_opcode_t *addr;
/* Adjust probe address from symbol */
addr = kprobe_addr(p);
if (IS_ERR(addr))
return PTR_ERR(addr);
p->addr = addr;
ret = check_kprobe_rereg(p);
if (ret)
return ret;
/* User can pass only KPROBE_FLAG_DISABLED to register_kprobe */
p->flags &= KPROBE_FLAG_DISABLED;
p->nmissed = 0;
INIT_LIST_HEAD(&p->list);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
ret = check_kprobe_address_safe(p, &probed_mod);
if (ret)
return ret;
mutex_lock(&kprobe_mutex);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
old_p = get_kprobe(p->addr);
if (old_p) {
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Since this may unoptimize old_p, locking text_mutex. */
ret = register_aggr_kprobe(old_p, p);
goto out;
}
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_lock();
/* Prevent text modification */
mutex_lock(&text_mutex);
ret = prepare_kprobe(p);
mutex_unlock(&text_mutex);
kprobes: Cure hotplug lock ordering issues Converting the cpu hotplug locking to a percpu rwsem unearthed hidden lock ordering problems. There is a wide range of locks involved in this: kprobe_mutex, jump_label_mutex, ftrace_lock, text_mutex, event_mutex, module_mutex, func_hash->regex_lock and a gazillion of lock order permutations with nested get_online_cpus() calls. Some of those permutations are potential deadlocks even with the current nesting hotplug locking scheme, but they can't be discovered by lockdep. The conversion of the hotplug locking to a percpu rwsem requires to prevent nested locking, so it's required to take the hotplug rwsem early in the call chain and establish a proper lock order. After quite some analysis and going down the wrong road severa times the following lock order has been chosen: kprobe_mutex -> cpus_rwsem -> jump_label_mutex -> text_mutex For kprobes which hook on an ftrace function trace point, it's required to drop cpus_rwsem before calling into the ftrace code to avoid a deadlock on the func_hash->regex_lock. [ Steven: Ftrace interaction fixes ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/20170524081549.104864779@linutronix.de
2017-05-24 11:15:36 +03:00
cpus_read_unlock();
if (ret)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
goto out;
INIT_HLIST_NODE(&p->hlist);
hlist_add_head_rcu(&p->hlist,
&kprobe_table[hash_ptr(p->addr, KPROBE_HASH_BITS)]);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (!kprobes_all_disarmed && !kprobe_disabled(p)) {
ret = arm_kprobe(p);
if (ret) {
hlist_del_rcu(&p->hlist);
synchronize_rcu();
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
goto out;
}
}
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Try to optimize kprobe */
try_to_optimize_kprobe(p);
out:
mutex_unlock(&kprobe_mutex);
if (probed_mod)
module_put(probed_mod);
return ret;
}
EXPORT_SYMBOL_GPL(register_kprobe);
/* Check if all probes on the aggrprobe are disabled */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int aggr_kprobe_disabled(struct kprobe *ap)
{
struct kprobe *kp;
lockdep_assert_held(&kprobe_mutex);
list_for_each_entry(kp, &ap->list, list)
if (!kprobe_disabled(kp))
/*
* There is an active probe on the list.
* We can't disable this ap.
*/
return 0;
return 1;
}
/* Disable one kprobe: Make sure called under kprobe_mutex is locked */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static struct kprobe *__disable_kprobe(struct kprobe *p)
{
struct kprobe *orig_p;
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
int ret;
/* Get an original kprobe for return */
orig_p = __get_valid_kprobe(p);
if (unlikely(orig_p == NULL))
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
return ERR_PTR(-EINVAL);
if (!kprobe_disabled(p)) {
/* Disable probe if it is a child probe */
if (p != orig_p)
p->flags |= KPROBE_FLAG_DISABLED;
/* Try to disarm and disable this/parent probe */
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
/*
* If kprobes_all_disarmed is set, orig_p
* should have already been disarmed, so
* skip unneed disarming process.
*/
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
if (!kprobes_all_disarmed) {
ret = disarm_kprobe(orig_p, true);
if (ret) {
p->flags &= ~KPROBE_FLAG_DISABLED;
return ERR_PTR(ret);
}
}
orig_p->flags |= KPROBE_FLAG_DISABLED;
}
}
return orig_p;
}
/*
* Unregister a kprobe without a scheduler synchronization.
*/
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int __unregister_kprobe_top(struct kprobe *p)
{
struct kprobe *ap, *list_p;
/* Disable kprobe. This will disarm it if needed. */
ap = __disable_kprobe(p);
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
if (IS_ERR(ap))
return PTR_ERR(ap);
if (ap == p)
/*
* This probe is an independent(and non-optimized) kprobe
* (not an aggrprobe). Remove from the hash list.
*/
goto disarmed;
/* Following process expects this probe is an aggrprobe */
WARN_ON(!kprobe_aggrprobe(ap));
if (list_is_singular(&ap->list) && kprobe_disarmed(ap))
/*
* !disarmed could be happen if the probe is under delayed
* unoptimizing.
*/
goto disarmed;
else {
/* If disabling probe has special handlers, update aggrprobe */
if (p->post_handler && !kprobe_gone(p)) {
list_for_each_entry(list_p, &ap->list, list) {
if ((list_p != p) && (list_p->post_handler))
goto noclean;
}
ap->post_handler = NULL;
}
noclean:
/*
* Remove from the aggrprobe: this path will do nothing in
* __unregister_kprobe_bottom().
*/
list_del_rcu(&p->list);
if (!kprobe_disabled(ap) && !kprobes_all_disarmed)
/*
* Try to optimize this probe again, because post
* handler may have been changed.
*/
optimize_kprobe(ap);
}
return 0;
disarmed:
hlist_del_rcu(&ap->hlist);
return 0;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void __unregister_kprobe_bottom(struct kprobe *p)
{
struct kprobe *ap;
if (list_empty(&p->list))
/* This is an independent kprobe */
arch_remove_kprobe(p);
else if (list_is_singular(&p->list)) {
/* This is the last child of an aggrprobe */
ap = list_entry(p->list.next, struct kprobe, list);
list_del(&p->list);
free_aggr_kprobe(ap);
}
/* Otherwise, do nothing. */
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int register_kprobes(struct kprobe **kps, int num)
{
int i, ret = 0;
if (num <= 0)
return -EINVAL;
for (i = 0; i < num; i++) {
ret = register_kprobe(kps[i]);
if (ret < 0) {
if (i > 0)
unregister_kprobes(kps, i);
break;
}
}
return ret;
}
EXPORT_SYMBOL_GPL(register_kprobes);
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void unregister_kprobe(struct kprobe *p)
{
unregister_kprobes(&p, 1);
}
EXPORT_SYMBOL_GPL(unregister_kprobe);
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void unregister_kprobes(struct kprobe **kps, int num)
{
int i;
if (num <= 0)
return;
mutex_lock(&kprobe_mutex);
for (i = 0; i < num; i++)
if (__unregister_kprobe_top(kps[i]) < 0)
kps[i]->addr = NULL;
mutex_unlock(&kprobe_mutex);
synchronize_rcu();
for (i = 0; i < num; i++)
if (kps[i]->addr)
__unregister_kprobe_bottom(kps[i]);
}
EXPORT_SYMBOL_GPL(unregister_kprobes);
int __weak kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
return NOTIFY_DONE;
}
NOKPROBE_SYMBOL(kprobe_exceptions_notify);
static struct notifier_block kprobe_exceptions_nb = {
.notifier_call = kprobe_exceptions_notify,
.priority = 0x7fffffff /* we need to be notified first */
};
unsigned long __weak arch_deref_entry_point(void *entry)
{
return (unsigned long)entry;
}
#ifdef CONFIG_KRETPROBES
unsigned long __kretprobe_trampoline_handler(struct pt_regs *regs,
void *trampoline_address,
void *frame_pointer)
{
struct kretprobe_instance *ri = NULL, *last = NULL;
struct hlist_head *head;
struct hlist_node *tmp;
unsigned long flags;
kprobe_opcode_t *correct_ret_addr = NULL;
bool skipped = false;
kretprobe_hash_lock(current, &head, &flags);
/*
* It is possible to have multiple instances associated with a given
* task either because multiple functions in the call path have
* return probes installed on them, and/or more than one
* return probe was registered for a target function.
*
* We can handle this because:
* - instances are always pushed into the head of the list
* - when multiple return probes are registered for the same
* function, the (chronologically) first instance's ret_addr
* will be the real return address, and all the rest will
* point to kretprobe_trampoline.
*/
hlist_for_each_entry(ri, head, hlist) {
if (ri->task != current)
/* another task is sharing our hash bucket */
continue;
/*
* Return probes must be pushed on this hash list correct
* order (same as return order) so that it can be popped
* correctly. However, if we find it is pushed it incorrect
* order, this means we find a function which should not be
* probed, because the wrong order entry is pushed on the
* path of processing other kretprobe itself.
*/
if (ri->fp != frame_pointer) {
if (!skipped)
pr_warn("kretprobe is stacked incorrectly. Trying to fixup.\n");
skipped = true;
continue;
}
correct_ret_addr = ri->ret_addr;
if (skipped)
pr_warn("%ps must be blacklisted because of incorrect kretprobe order\n",
ri->rp->kp.addr);
if (correct_ret_addr != trampoline_address)
/*
* This is the real return address. Any other
* instances associated with this task are for
* other calls deeper on the call stack
*/
break;
}
BUG_ON(!correct_ret_addr || (correct_ret_addr == trampoline_address));
last = ri;
hlist_for_each_entry_safe(ri, tmp, head, hlist) {
if (ri->task != current)
/* another task is sharing our hash bucket */
continue;
if (ri->fp != frame_pointer)
continue;
if (ri->rp && ri->rp->handler) {
struct kprobe *prev = kprobe_running();
__this_cpu_write(current_kprobe, &ri->rp->kp);
ri->ret_addr = correct_ret_addr;
ri->rp->handler(ri, regs);
__this_cpu_write(current_kprobe, prev);
}
recycle_rp_inst(ri);
if (ri == last)
break;
}
kretprobe_hash_unlock(current, &flags);
return (unsigned long)correct_ret_addr;
}
NOKPROBE_SYMBOL(__kretprobe_trampoline_handler)
/*
* This kprobe pre_handler is registered with every kretprobe. When probe
* hits it will set up the return probe.
*/
static int pre_handler_kretprobe(struct kprobe *p, struct pt_regs *regs)
{
struct kretprobe *rp = container_of(p, struct kretprobe, kp);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
unsigned long hash, flags = 0;
struct kretprobe_instance *ri;
/* TODO: consider to only swap the RA after the last pre_handler fired */
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
hash = hash_ptr(current, KPROBE_HASH_BITS);
raw_spin_lock_irqsave(&rp->lock, flags);
if (!hlist_empty(&rp->free_instances)) {
ri = hlist_entry(rp->free_instances.first,
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
struct kretprobe_instance, hlist);
hlist_del(&ri->hlist);
raw_spin_unlock_irqrestore(&rp->lock, flags);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
ri->rp = rp;
ri->task = current;
if (rp->entry_handler && rp->entry_handler(ri, regs)) {
raw_spin_lock_irqsave(&rp->lock, flags);
hlist_add_head(&ri->hlist, &rp->free_instances);
raw_spin_unlock_irqrestore(&rp->lock, flags);
return 0;
}
arch_prepare_kretprobe(ri, regs);
/* XXX(hch): why is there no hlist_move_head? */
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
INIT_HLIST_NODE(&ri->hlist);
kretprobe_table_lock(hash, &flags);
hlist_add_head(&ri->hlist, &kretprobe_inst_table[hash]);
kretprobe_table_unlock(hash, &flags);
} else {
rp->nmissed++;
raw_spin_unlock_irqrestore(&rp->lock, flags);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
}
return 0;
}
NOKPROBE_SYMBOL(pre_handler_kretprobe);
bool __weak arch_kprobe_on_func_entry(unsigned long offset)
{
return !offset;
}
bool kprobe_on_func_entry(kprobe_opcode_t *addr, const char *sym, unsigned long offset)
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
{
kprobe_opcode_t *kp_addr = _kprobe_addr(addr, sym, offset);
if (IS_ERR(kp_addr))
return false;
if (!kallsyms_lookup_size_offset((unsigned long)kp_addr, NULL, &offset) ||
!arch_kprobe_on_func_entry(offset))
trace/kprobes: Fix check for kretprobe offset within function entry perf specifies an offset from _text and since this offset is fed directly into the arch-specific helper, kprobes tracer rejects installation of kretprobes through perf. Fix this by looking up the actual offset from a function for the specified sym+offset. Refactor and reuse existing routines to limit code duplication -- we repurpose kprobe_addr() for determining final kprobe address and we split out the function entry offset determination into a separate generic helper. Before patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7ff] Probe point found: do_open+0 Matched function: do_open [35d76dc] found inline addr: 0xc0000000004ba9c4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469776 Failed to write event: Invalid argument Error: Failed to add events. Reason: Invalid argument (Code: -22) naveen@ubuntu:~/linux/tools/perf$ dmesg | tail <snip> [ 33.568656] Given offset is not valid for return probe. After patch: naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return probe-definition(0): do_open%return symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null) 0 arguments Looking at the vmlinux_path (8 entries long) Using /boot/vmlinux for symbols Open Debuginfo file: /boot/vmlinux Try to find probe point from debuginfo. Matched function: do_open [2d0c7d6] Probe point found: do_open+0 Matched function: do_open [35d76b3] found inline addr: 0xc0000000004ba9e4 Failed to find "do_open%return", because do_open is an inlined function and has no return point. An error occurred in debuginfo analysis (-22). Trying to use symbols. Opening /sys/kernel/debug/tracing//README write=0 Opening /sys/kernel/debug/tracing//kprobe_events write=1 Writing event: r:probe/do_open _text+4469808 Writing event: r:probe/do_open_1 _text+4956344 Added new events: probe:do_open (on do_open%return) probe:do_open_1 (on do_open%return) You can now use it in all perf tools, such as: perf record -e probe:do_open_1 -aR sleep 1 naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED] c0000000004ba0b8 r do_open+0x8 [DISABLED] c000000000443430 r do_open+0x0 [DISABLED] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/d8cd1ef420ec22e3643ac332fdabcffc77319a42.1488961018.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 11:26:06 +03:00
return false;
return true;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int register_kretprobe(struct kretprobe *rp)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
{
int ret = 0;
struct kretprobe_instance *inst;
int i;
void *addr;
if (!kprobe_on_func_entry(rp->kp.addr, rp->kp.symbol_name, rp->kp.offset))
return -EINVAL;
if (kretprobe_blacklist_size) {
addr = kprobe_addr(&rp->kp);
if (IS_ERR(addr))
return PTR_ERR(addr);
for (i = 0; kretprobe_blacklist[i].name != NULL; i++) {
if (kretprobe_blacklist[i].addr == addr)
return -EINVAL;
}
}
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
rp->kp.pre_handler = pre_handler_kretprobe;
rp->kp.post_handler = NULL;
rp->kp.fault_handler = NULL;
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
/* Pre-allocate memory for max kretprobe instances */
if (rp->maxactive <= 0) {
#ifdef CONFIG_PREEMPTION
rp->maxactive = max_t(unsigned int, 10, 2*num_possible_cpus());
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
#else
rp->maxactive = num_possible_cpus();
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
#endif
}
raw_spin_lock_init(&rp->lock);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
INIT_HLIST_HEAD(&rp->free_instances);
for (i = 0; i < rp->maxactive; i++) {
inst = kmalloc(sizeof(struct kretprobe_instance) +
rp->data_size, GFP_KERNEL);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
if (inst == NULL) {
free_rp_inst(rp);
return -ENOMEM;
}
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
INIT_HLIST_NODE(&inst->hlist);
hlist_add_head(&inst->hlist, &rp->free_instances);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
}
rp->nmissed = 0;
/* Establish function entry probe point */
ret = register_kprobe(&rp->kp);
if (ret != 0)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
free_rp_inst(rp);
return ret;
}
EXPORT_SYMBOL_GPL(register_kretprobe);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int register_kretprobes(struct kretprobe **rps, int num)
{
int ret = 0, i;
if (num <= 0)
return -EINVAL;
for (i = 0; i < num; i++) {
ret = register_kretprobe(rps[i]);
if (ret < 0) {
if (i > 0)
unregister_kretprobes(rps, i);
break;
}
}
return ret;
}
EXPORT_SYMBOL_GPL(register_kretprobes);
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void unregister_kretprobe(struct kretprobe *rp)
{
unregister_kretprobes(&rp, 1);
}
EXPORT_SYMBOL_GPL(unregister_kretprobe);
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void unregister_kretprobes(struct kretprobe **rps, int num)
{
int i;
if (num <= 0)
return;
mutex_lock(&kprobe_mutex);
for (i = 0; i < num; i++)
if (__unregister_kprobe_top(&rps[i]->kp) < 0)
rps[i]->kp.addr = NULL;
mutex_unlock(&kprobe_mutex);
synchronize_rcu();
for (i = 0; i < num; i++) {
if (rps[i]->kp.addr) {
__unregister_kprobe_bottom(&rps[i]->kp);
cleanup_rp_inst(rps[i]);
}
}
}
EXPORT_SYMBOL_GPL(unregister_kretprobes);
#else /* CONFIG_KRETPROBES */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int register_kretprobe(struct kretprobe *rp)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
{
return -ENOSYS;
}
EXPORT_SYMBOL_GPL(register_kretprobe);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int register_kretprobes(struct kretprobe **rps, int num)
{
return -ENOSYS;
}
EXPORT_SYMBOL_GPL(register_kretprobes);
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void unregister_kretprobe(struct kretprobe *rp)
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
{
}
EXPORT_SYMBOL_GPL(unregister_kretprobe);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
void unregister_kretprobes(struct kretprobe **rps, int num)
{
}
EXPORT_SYMBOL_GPL(unregister_kretprobes);
static int pre_handler_kretprobe(struct kprobe *p, struct pt_regs *regs)
{
return 0;
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
}
NOKPROBE_SYMBOL(pre_handler_kretprobe);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
#endif /* CONFIG_KRETPROBES */
/* Set the kprobe gone and remove its instruction buffer. */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void kill_kprobe(struct kprobe *p)
{
struct kprobe *kp;
lockdep_assert_held(&kprobe_mutex);
if (WARN_ON_ONCE(kprobe_gone(p)))
return;
p->flags |= KPROBE_FLAG_GONE;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
if (kprobe_aggrprobe(p)) {
/*
* If this is an aggr_kprobe, we have to list all the
* chained probes and mark them GONE.
*/
list_for_each_entry(kp, &p->list, list)
kp->flags |= KPROBE_FLAG_GONE;
p->post_handler = NULL;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
kill_optimized_kprobe(p);
}
/*
* Here, we can remove insn_slot safely, because no thread calls
* the original probed function (which will be freed soon) any more.
*/
arch_remove_kprobe(p);
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information): BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0 RSP: 0018:ffffb512c6550998 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000 RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0 RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ftrace_ops_assist_func+0x56/0xe0 ftrace_call+0x5/0x34 tcpa_statistic_send+0x5/0x130 [ttcp_engine] The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump. crash> dis tcpa_statistic_send -r <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller> The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path. Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko. 1) insmod kprobe_test.ko 2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' 3) echo 0 > /proc/sys/kernel/ftrace_enabled 4) rmmod kprobe_test 5) stop step 2) kprobe 6) insmod kprobe_test.ko 7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away. Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com Cc: stable@vger.kernel.org Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-07-28 09:45:36 +03:00
/*
* The module is going away. We should disarm the kprobe which
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace() Commit 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") fixed one bug but not completely fixed yet. If we run a kprobe_module.tc of ftracetest, kernel showed a warning as below. # ./ftracetest test.d/kprobe/kprobe_module.tc === Ftrace unit tests === [1] Kprobe dynamic event - probing module ... [ 22.400215] ------------[ cut here ]------------ [ 22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2) [ 22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.403358] Modules linked in: trace_printk(-) [ 22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66 [ 22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7 [ 22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286 [ 22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000 [ 22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3 [ 22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001 [ 22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640 [ 22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000 [ 22.415941] FS: 00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000 [ 22.417264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0 [ 22.419309] Call Trace: [ 22.419990] kill_kprobe+0x94/0x160 [ 22.420652] kprobes_module_callback+0x64/0x230 [ 22.421470] notifier_call_chain+0x4f/0x70 [ 22.422184] blocking_notifier_call_chain+0x49/0x70 [ 22.422979] __x64_sys_delete_module+0x1ac/0x240 [ 22.423733] do_syscall_64+0x38/0x50 [ 22.424366] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.425176] RIP: 0033:0x4bb81d [ 22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48 [ 22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d [ 22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028 [ 22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320 [ 22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028 [ 22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000 [ 22.435682] irq event stamp: 1169 [ 22.436240] hardirqs last enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580 [ 22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580 [ 22.438608] softirqs last enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490 [ 22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20 [ 22.440690] ---[ end trace 1e7ce7e1e4567276 ]--- [ 22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue. This is because the kill_kprobe() calls disarm_kprobe_ftrace() even if the given probe is not enabled. In that case, ftrace_set_filter_ip() fails because the given probe point is not registered to ftrace. Fix to check the given (going) probe is enabled before invoking disarm_kprobe_ftrace(). Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2 Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-08-31 18:12:07 +03:00
* is using ftrace, because ftrace framework is still available at
* MODULE_STATE_GOING notification.
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information): BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0 RSP: 0018:ffffb512c6550998 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000 RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0 RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ftrace_ops_assist_func+0x56/0xe0 ftrace_call+0x5/0x34 tcpa_statistic_send+0x5/0x130 [ttcp_engine] The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump. crash> dis tcpa_statistic_send -r <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller> The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path. Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko. 1) insmod kprobe_test.ko 2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' 3) echo 0 > /proc/sys/kernel/ftrace_enabled 4) rmmod kprobe_test 5) stop step 2) kprobe 6) insmod kprobe_test.ko 7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away. Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com Cc: stable@vger.kernel.org Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-07-28 09:45:36 +03:00
*/
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace() Commit 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") fixed one bug but not completely fixed yet. If we run a kprobe_module.tc of ftracetest, kernel showed a warning as below. # ./ftracetest test.d/kprobe/kprobe_module.tc === Ftrace unit tests === [1] Kprobe dynamic event - probing module ... [ 22.400215] ------------[ cut here ]------------ [ 22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2) [ 22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.403358] Modules linked in: trace_printk(-) [ 22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66 [ 22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7 [ 22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286 [ 22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000 [ 22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3 [ 22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001 [ 22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640 [ 22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000 [ 22.415941] FS: 00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000 [ 22.417264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0 [ 22.419309] Call Trace: [ 22.419990] kill_kprobe+0x94/0x160 [ 22.420652] kprobes_module_callback+0x64/0x230 [ 22.421470] notifier_call_chain+0x4f/0x70 [ 22.422184] blocking_notifier_call_chain+0x49/0x70 [ 22.422979] __x64_sys_delete_module+0x1ac/0x240 [ 22.423733] do_syscall_64+0x38/0x50 [ 22.424366] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.425176] RIP: 0033:0x4bb81d [ 22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48 [ 22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d [ 22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028 [ 22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320 [ 22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028 [ 22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000 [ 22.435682] irq event stamp: 1169 [ 22.436240] hardirqs last enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580 [ 22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580 [ 22.438608] softirqs last enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490 [ 22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20 [ 22.440690] ---[ end trace 1e7ce7e1e4567276 ]--- [ 22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue. This is because the kill_kprobe() calls disarm_kprobe_ftrace() even if the given probe is not enabled. In that case, ftrace_set_filter_ip() fails because the given probe point is not registered to ftrace. Fix to check the given (going) probe is enabled before invoking disarm_kprobe_ftrace(). Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2 Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-08-31 18:12:07 +03:00
if (kprobe_ftrace(p) && !kprobe_disabled(p) && !kprobes_all_disarmed)
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information): BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0 RSP: 0018:ffffb512c6550998 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000 RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0 RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ftrace_ops_assist_func+0x56/0xe0 ftrace_call+0x5/0x34 tcpa_statistic_send+0x5/0x130 [ttcp_engine] The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump. crash> dis tcpa_statistic_send -r <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller> The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path. Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko. 1) insmod kprobe_test.ko 2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' 3) echo 0 > /proc/sys/kernel/ftrace_enabled 4) rmmod kprobe_test 5) stop step 2) kprobe 6) insmod kprobe_test.ko 7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away. Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com Cc: stable@vger.kernel.org Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-07-28 09:45:36 +03:00
disarm_kprobe_ftrace(p);
}
/* Disable one kprobe */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int disable_kprobe(struct kprobe *kp)
{
int ret = 0;
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
struct kprobe *p;
mutex_lock(&kprobe_mutex);
/* Disable this kprobe */
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
p = __disable_kprobe(kp);
if (IS_ERR(p))
ret = PTR_ERR(p);
mutex_unlock(&kprobe_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(disable_kprobe);
/* Enable one kprobe */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
int enable_kprobe(struct kprobe *kp)
{
int ret = 0;
struct kprobe *p;
mutex_lock(&kprobe_mutex);
/* Check whether specified probe is valid. */
p = __get_valid_kprobe(kp);
if (unlikely(p == NULL)) {
ret = -EINVAL;
goto out;
}
if (kprobe_gone(kp)) {
/* This kprobe has gone, we couldn't enable it. */
ret = -EINVAL;
goto out;
}
if (p != kp)
kp->flags &= ~KPROBE_FLAG_DISABLED;
if (!kprobes_all_disarmed && kprobe_disabled(p)) {
p->flags &= ~KPROBE_FLAG_DISABLED;
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
ret = arm_kprobe(p);
if (ret)
p->flags |= KPROBE_FLAG_DISABLED;
}
out:
mutex_unlock(&kprobe_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(enable_kprobe);
/* Caller must NOT call this in usual path. This is only for critical case */
void dump_kprobe(struct kprobe *kp)
{
pr_err("Dumping kprobe:\n");
pr_err("Name: %s\nOffset: %x\nAddress: %pS\n",
kp->symbol_name, kp->offset, kp->addr);
}
NOKPROBE_SYMBOL(dump_kprobe);
int kprobe_add_ksym_blacklist(unsigned long entry)
{
struct kprobe_blacklist_entry *ent;
unsigned long offset = 0, size = 0;
if (!kernel_text_address(entry) ||
!kallsyms_lookup_size_offset(entry, &size, &offset))
return -EINVAL;
ent = kmalloc(sizeof(*ent), GFP_KERNEL);
if (!ent)
return -ENOMEM;
ent->start_addr = entry;
ent->end_addr = entry + size;
INIT_LIST_HEAD(&ent->list);
list_add_tail(&ent->list, &kprobe_blacklist);
return (int)size;
}
/* Add all symbols in given area into kprobe blacklist */
int kprobe_add_area_blacklist(unsigned long start, unsigned long end)
{
unsigned long entry;
int ret = 0;
for (entry = start; entry < end; entry += ret) {
ret = kprobe_add_ksym_blacklist(entry);
if (ret < 0)
return ret;
if (ret == 0) /* In case of alias symbol */
ret = 1;
}
return 0;
}
/* Remove all symbols in given area from kprobe blacklist */
static void kprobe_remove_area_blacklist(unsigned long start, unsigned long end)
{
struct kprobe_blacklist_entry *ent, *n;
list_for_each_entry_safe(ent, n, &kprobe_blacklist, list) {
if (ent->start_addr < start || ent->start_addr >= end)
continue;
list_del(&ent->list);
kfree(ent);
}
}
static void kprobe_remove_ksym_blacklist(unsigned long entry)
{
kprobe_remove_area_blacklist(entry, entry + 1);
}
int __weak arch_kprobe_get_kallsym(unsigned int *symnum, unsigned long *value,
char *type, char *sym)
{
return -ERANGE;
}
int kprobe_get_kallsym(unsigned int symnum, unsigned long *value, char *type,
char *sym)
{
#ifdef __ARCH_WANT_KPROBES_INSN_SLOT
if (!kprobe_cache_get_kallsym(&kprobe_insn_slots, &symnum, value, type, sym))
return 0;
#ifdef CONFIG_OPTPROBES
if (!kprobe_cache_get_kallsym(&kprobe_optinsn_slots, &symnum, value, type, sym))
return 0;
#endif
#endif
if (!arch_kprobe_get_kallsym(&symnum, value, type, sym))
return 0;
return -ERANGE;
}
int __init __weak arch_populate_kprobe_blacklist(void)
{
return 0;
}
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
/*
* Lookup and populate the kprobe_blacklist.
*
* Unlike the kretprobe blacklist, we'll need to determine
* the range of addresses that belong to the said functions,
* since a kprobe need not necessarily be at the beginning
* of a function.
*/
static int __init populate_kprobe_blacklist(unsigned long *start,
unsigned long *end)
{
unsigned long entry;
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
unsigned long *iter;
int ret;
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
for (iter = start; iter < end; iter++) {
kprobes: Fix "Failed to find blacklist" probing errors on ia64 and ppc64 On ia64 and ppc64, function pointers do not point to the entry address of the function, but to the address of a function descriptor (which contains the entry address and misc data). Since the kprobes code passes the function pointer stored by NOKPROBE_SYMBOL() to kallsyms_lookup_size_offset() for initalizing its blacklist, it fails and reports many errors, such as: Failed to find blacklist 0001013168300000 Failed to find blacklist 0001013000f0a000 [...] To fix this bug, use arch_deref_entry_point() to get the function entry address for kallsyms_lookup_size_offset() instead of the raw function pointer. Suzuki also pointed out that blacklist entries should also be updated as well. Reported-by: Tony Luck <tony.luck@gmail.com> Fixed-by: Suzuki K. Poulose <suzuki@in.ibm.com> Tested-by: Tony Luck <tony.luck@intel.com> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (for powerpc) Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: sparse@chrisli.org Cc: Paul Mackerras <paulus@samba.org> Cc: akataria@vmware.com Cc: anil.s.keshavamurthy@intel.com Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Cc: yrl.pp-manager.tt@hitachi.com Cc: Kevin Hao <haokexin@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: rdunlap@infradead.org Cc: dl9pf@gmx.de Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net> Cc: linux-ia64@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140717114411.13401.2632.stgit@kbuild-fedora.novalocal Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-17 15:44:11 +04:00
entry = arch_deref_entry_point((void *)*iter);
ret = kprobe_add_ksym_blacklist(entry);
if (ret == -EINVAL)
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
continue;
if (ret < 0)
return ret;
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
}
/* Symbols in __kprobes_text are blacklisted */
ret = kprobe_add_area_blacklist((unsigned long)__kprobes_text_start,
(unsigned long)__kprobes_text_end);
if (ret)
return ret;
/* Symbols in noinstr section are blacklisted */
ret = kprobe_add_area_blacklist((unsigned long)__noinstr_text_start,
(unsigned long)__noinstr_text_end);
return ret ? : arch_populate_kprobe_blacklist();
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
}
static void add_module_kprobe_blacklist(struct module *mod)
{
unsigned long start, end;
int i;
if (mod->kprobe_blacklist) {
for (i = 0; i < mod->num_kprobe_blacklist; i++)
kprobe_add_ksym_blacklist(mod->kprobe_blacklist[i]);
}
start = (unsigned long)mod->kprobes_text_start;
if (start) {
end = start + mod->kprobes_text_size;
kprobe_add_area_blacklist(start, end);
}
start = (unsigned long)mod->noinstr_text_start;
if (start) {
end = start + mod->noinstr_text_size;
kprobe_add_area_blacklist(start, end);
}
}
static void remove_module_kprobe_blacklist(struct module *mod)
{
unsigned long start, end;
int i;
if (mod->kprobe_blacklist) {
for (i = 0; i < mod->num_kprobe_blacklist; i++)
kprobe_remove_ksym_blacklist(mod->kprobe_blacklist[i]);
}
start = (unsigned long)mod->kprobes_text_start;
if (start) {
end = start + mod->kprobes_text_size;
kprobe_remove_area_blacklist(start, end);
}
start = (unsigned long)mod->noinstr_text_start;
if (start) {
end = start + mod->noinstr_text_size;
kprobe_remove_area_blacklist(start, end);
}
}
/* Module notifier call back, checking kprobes on the module */
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int kprobes_module_callback(struct notifier_block *nb,
unsigned long val, void *data)
{
struct module *mod = data;
struct hlist_head *head;
struct kprobe *p;
unsigned int i;
int checkcore = (val == MODULE_STATE_GOING);
if (val == MODULE_STATE_COMING) {
mutex_lock(&kprobe_mutex);
add_module_kprobe_blacklist(mod);
mutex_unlock(&kprobe_mutex);
}
if (val != MODULE_STATE_GOING && val != MODULE_STATE_LIVE)
return NOTIFY_DONE;
/*
* When MODULE_STATE_GOING was notified, both of module .text and
* .init.text sections would be freed. When MODULE_STATE_LIVE was
* notified, only .init.text section would be freed. We need to
* disable kprobes which have been inserted in the sections.
*/
mutex_lock(&kprobe_mutex);
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry(p, head, hlist) {
if (kprobe_gone(p))
continue;
if (within_module_init((unsigned long)p->addr, mod) ||
(checkcore &&
within_module_core((unsigned long)p->addr, mod))) {
/*
* The vaddr this probe is installed will soon
* be vfreed buy not synced to disk. Hence,
* disarming the breakpoint isn't needed.
*
* Note, this will also move any optimized probes
* that are pending to be removed from their
* corresponding lists to the freeing_list and
* will not be touched by the delayed
* kprobe_optimizer work handler.
*/
kill_kprobe(p);
}
}
}
if (val == MODULE_STATE_GOING)
remove_module_kprobe_blacklist(mod);
mutex_unlock(&kprobe_mutex);
return NOTIFY_DONE;
}
static struct notifier_block kprobe_module_nb = {
.notifier_call = kprobes_module_callback,
.priority = 0
};
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
/* Markers of _kprobe_blacklist section */
extern unsigned long __start_kprobe_blacklist[];
extern unsigned long __stop_kprobe_blacklist[];
void kprobe_free_init_mem(void)
{
void *start = (void *)(&__init_begin);
void *end = (void *)(&__init_end);
struct hlist_head *head;
struct kprobe *p;
int i;
mutex_lock(&kprobe_mutex);
/* Kill all kprobes on initmem */
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
hlist_for_each_entry(p, head, hlist) {
if (start <= (void *)p->addr && (void *)p->addr < end)
kill_kprobe(p);
}
}
mutex_unlock(&kprobe_mutex);
}
static int __init init_kprobes(void)
{
int i, err = 0;
/* FIXME allocate the probe table, currently defined statically */
/* initialize all list heads */
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
INIT_HLIST_HEAD(&kprobe_table[i]);
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
INIT_HLIST_HEAD(&kretprobe_inst_table[i]);
raw_spin_lock_init(&(kretprobe_table_locks[i].lock));
[PATCH] kprobes: function-return probes This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by: Hien Nguyen <hien@us.ibm.com> Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 11:09:19 +04:00
}
kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist Introduce NOKPROBE_SYMBOL() macro which builds a kprobes blacklist at kernel build time. The usage of this macro is similar to EXPORT_SYMBOL(), placed after the function definition: NOKPROBE_SYMBOL(function); Since this macro will inhibit inlining of static/inline functions, this patch also introduces a nokprobe_inline macro for static/inline functions. In this case, we must use NOKPROBE_SYMBOL() for the inline function caller. When CONFIG_KPROBES=y, the macro stores the given function address in the "_kprobe_blacklist" section. Since the data structures are not fully initialized by the macro (because there is no "size" information), those are re-initialized at boot time by using kallsyms. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Alok Kataria <akataria@vmware.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christopher Li <sparse@chrisli.org> Cc: Chris Wright <chrisw@sous-sol.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jan-Simon Möller <dl9pf@gmx.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-sparse@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:05 +04:00
err = populate_kprobe_blacklist(__start_kprobe_blacklist,
__stop_kprobe_blacklist);
if (err) {
pr_err("kprobes: failed to populate blacklist: %d\n", err);
pr_err("Please take care of using kprobes.\n");
}
if (kretprobe_blacklist_size) {
/* lookup the function address from its name */
for (i = 0; kretprobe_blacklist[i].name != NULL; i++) {
kretprobe_blacklist[i].addr =
kprobe_lookup_name(kretprobe_blacklist[i].name, 0);
if (!kretprobe_blacklist[i].addr)
printk("kretprobe: lookup failed: %s\n",
kretprobe_blacklist[i].name);
}
}
#if defined(CONFIG_OPTPROBES)
#if defined(__ARCH_WANT_KPROBES_INSN_SLOT)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Init kprobe_optinsn_slots */
kprobe_optinsn_slots.insn_size = MAX_OPTINSN_SIZE;
#endif
/* By default, kprobes can be optimized */
kprobes_allow_optimization = true;
#endif
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* By default, kprobes are armed */
kprobes_all_disarmed = false;
err = arch_init_kprobes();
[PATCH] Return probe redesign: architecture independent changes The following is the second version of the function return probe patches I sent out earlier this week. Changes since my last submission include: * Fix in ppc64 code removing an unneeded call to re-enable preemption * Fix a build problem in ia64 when kprobes was turned off * Added another BUG_ON check to each of the architecture trampoline handlers My initial patch description ==> From my experiences with adding return probes to x86_64 and ia64, and the feedback on LKML to those patches, I think we can simplify the design for return probes. The following patch tweaks the original design such that: * Instead of storing the stack address in the return probe instance, the task pointer is stored. This gives us all we need in order to: - find the correct return probe instance when we enter the trampoline (even if we are recursing) - find all left-over return probe instances when the task is going away This has the side effect of simplifying the implementation since more work can be done in kernel/kprobes.c since architecture specific knowledge of the stack layout is no longer required. Specifically, we no longer have: - arch_get_kprobe_task() - arch_kprobe_flush_task() - get_rp_inst_tsk() - get_rp_inst() - trampoline_post_handler() <see next bullet> * Instead of splitting the return probe handling and cleanup logic across the pre and post trampoline handlers, all the work is pushed into the pre function (trampoline_probe_handler), and then we skip single stepping the original function. In this case the original instruction to be single stepped was just a NOP, and we can do without the extra interruption. The new flow of events to having a return probe handler execute when a target function exits is: * At system initialization time, a kprobe is inserted at the beginning of kretprobe_trampoline. kernel/kprobes.c use to handle this on it's own, but ia64 needed to do this a little differently (i.e. a function pointer is really a pointer to a structure containing the instruction pointer and a global pointer), so I added the notion of arch_init(), so that kernel/kprobes.c:init_kprobes() now allows architecture specific initialization by calling arch_init() before exiting. Each architecture now registers a kprobe on it's own trampoline function. * register_kretprobe() will insert a kprobe at the beginning of the targeted function with the kprobe pre_handler set to arch_prepare_kretprobe (still no change) * When the target function is entered, the kprobe is fired, calling arch_prepare_kretprobe (still no change) * In arch_prepare_kretprobe() we try to get a free instance and if one is available then we fill out the instance with a pointer to the return probe, the original return address, and a pointer to the task structure (instead of the stack address.) Just like before we change the return address to the trampoline function and mark the instance as used. If multiple return probes are registered for a given target function, then arch_prepare_kretprobe() will get called multiple times for the same task (since our kprobe implementation is able to handle multiple kprobes at the same address.) Past the first call to arch_prepare_kretprobe, we end up with the original address stored in the return probe instance pointing to our trampoline function. (This is a significant difference from the original arch_prepare_kretprobe design.) * Target function executes like normal and then returns to kretprobe_trampoline. * kprobe inserted on the first instruction of kretprobe_trampoline is fired and calls trampoline_probe_handler() (no change here) * trampoline_probe_handler() consumes each of the instances associated with the current task by calling the registered handler function and marking the instance as unused until an instance is found that has a return address different then the trampoline function. (change similar to my previous ia64 RFC) * If the task is killed with some left-over return probe instances (meaning that a target function was entered, but never returned), then we just free any instances associated with the task. (Not much different other then we can handle this without calling architecture specific functions.) There is a known problem that this patch does not yet solve where registering a return probe flush_old_exec or flush_thread will put us in a bad state. Most likely the best way to handle this is to not allow registering return probes on these two functions. (Significant change) This patch series applies to the 2.6.12-rc6-mm1 kernel, and provides: * kernel/kprobes.c changes * i386 patch of existing return probes implementation * x86_64 patch of existing return probe implementation * ia64 implementation * ppc64 implementation (provided by Ananth) This patch implements the architecture independant changes for a reworking of the kprobes based function return probes design. Changes include: * Removing functions for querying a return probe instance off a stack address * Removing the stack_addr field from the kretprobe_instance definition, and adding a task pointer * Adding architecture specific initialization via arch_init() * Removing extern definitions for the architecture trampoline functions (this isn't needed anymore since the architecture handles the initialization of the kprobe in the return probe trampoline function.) Signed-off-by: Rusty Lynch <rusty.lynch@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 02:17:08 +04:00
if (!err)
err = register_die_notifier(&kprobe_exceptions_nb);
if (!err)
err = register_module_notifier(&kprobe_module_nb);
kprobes: improve kretprobe scalability with hashed locking Currently list of kretprobe instances are stored in kretprobe object (as used_instances,free_instances) and in kretprobe hash table. We have one global kretprobe lock to serialise the access to these lists. This causes only one kretprobe handler to execute at a time. Hence affects system performance, particularly on SMP systems and when return probe is set on lot of functions (like on all systemcalls). Solution proposed here gives fine-grain locks that performs better on SMP system compared to present kretprobe implementation. Solution: 1) Instead of having one global lock to protect kretprobe instances present in kretprobe object and kretprobe hash table. We will have two locks, one lock for protecting kretprobe hash table and another lock for kretporbe object. 2) We hold lock present in kretprobe object while we modify kretprobe instance in kretprobe object and we hold per-hash-list lock while modifying kretprobe instances present in that hash list. To prevent deadlock, we never grab a per-hash-list lock while holding a kretprobe lock. 3) We can remove used_instances from struct kretprobe, as we can track used instances of kretprobe instances using kretprobe hash table. Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system with return probes set on all systemcalls looks like this. cacheline non-cacheline Un-patched kernel aligned patch aligned patch =============================================================================== real 9m46.784s 9m54.412s 10m2.450s user 40m5.715s 40m7.142s 40m4.273s sys 2m57.754s 2m58.583s 3m17.430s =========================================================== Time duration for kernel compilation ("make -j 8) on the same system, when kernel is not probed. ========================= real 9m26.389s user 40m8.775s sys 2m7.283s ========================= Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:04 +04:00
kprobes_initialized = (err == 0);
[PATCH] Return probe redesign: architecture independent changes The following is the second version of the function return probe patches I sent out earlier this week. Changes since my last submission include: * Fix in ppc64 code removing an unneeded call to re-enable preemption * Fix a build problem in ia64 when kprobes was turned off * Added another BUG_ON check to each of the architecture trampoline handlers My initial patch description ==> From my experiences with adding return probes to x86_64 and ia64, and the feedback on LKML to those patches, I think we can simplify the design for return probes. The following patch tweaks the original design such that: * Instead of storing the stack address in the return probe instance, the task pointer is stored. This gives us all we need in order to: - find the correct return probe instance when we enter the trampoline (even if we are recursing) - find all left-over return probe instances when the task is going away This has the side effect of simplifying the implementation since more work can be done in kernel/kprobes.c since architecture specific knowledge of the stack layout is no longer required. Specifically, we no longer have: - arch_get_kprobe_task() - arch_kprobe_flush_task() - get_rp_inst_tsk() - get_rp_inst() - trampoline_post_handler() <see next bullet> * Instead of splitting the return probe handling and cleanup logic across the pre and post trampoline handlers, all the work is pushed into the pre function (trampoline_probe_handler), and then we skip single stepping the original function. In this case the original instruction to be single stepped was just a NOP, and we can do without the extra interruption. The new flow of events to having a return probe handler execute when a target function exits is: * At system initialization time, a kprobe is inserted at the beginning of kretprobe_trampoline. kernel/kprobes.c use to handle this on it's own, but ia64 needed to do this a little differently (i.e. a function pointer is really a pointer to a structure containing the instruction pointer and a global pointer), so I added the notion of arch_init(), so that kernel/kprobes.c:init_kprobes() now allows architecture specific initialization by calling arch_init() before exiting. Each architecture now registers a kprobe on it's own trampoline function. * register_kretprobe() will insert a kprobe at the beginning of the targeted function with the kprobe pre_handler set to arch_prepare_kretprobe (still no change) * When the target function is entered, the kprobe is fired, calling arch_prepare_kretprobe (still no change) * In arch_prepare_kretprobe() we try to get a free instance and if one is available then we fill out the instance with a pointer to the return probe, the original return address, and a pointer to the task structure (instead of the stack address.) Just like before we change the return address to the trampoline function and mark the instance as used. If multiple return probes are registered for a given target function, then arch_prepare_kretprobe() will get called multiple times for the same task (since our kprobe implementation is able to handle multiple kprobes at the same address.) Past the first call to arch_prepare_kretprobe, we end up with the original address stored in the return probe instance pointing to our trampoline function. (This is a significant difference from the original arch_prepare_kretprobe design.) * Target function executes like normal and then returns to kretprobe_trampoline. * kprobe inserted on the first instruction of kretprobe_trampoline is fired and calls trampoline_probe_handler() (no change here) * trampoline_probe_handler() consumes each of the instances associated with the current task by calling the registered handler function and marking the instance as unused until an instance is found that has a return address different then the trampoline function. (change similar to my previous ia64 RFC) * If the task is killed with some left-over return probe instances (meaning that a target function was entered, but never returned), then we just free any instances associated with the task. (Not much different other then we can handle this without calling architecture specific functions.) There is a known problem that this patch does not yet solve where registering a return probe flush_old_exec or flush_thread will put us in a bad state. Most likely the best way to handle this is to not allow registering return probes on these two functions. (Significant change) This patch series applies to the 2.6.12-rc6-mm1 kernel, and provides: * kernel/kprobes.c changes * i386 patch of existing return probes implementation * x86_64 patch of existing return probe implementation * ia64 implementation * ppc64 implementation (provided by Ananth) This patch implements the architecture independant changes for a reworking of the kprobes based function return probes design. Changes include: * Removing functions for querying a return probe instance off a stack address * Removing the stack_addr field from the kretprobe_instance definition, and adding a task pointer * Adding architecture specific initialization via arch_init() * Removing extern definitions for the architecture trampoline functions (this isn't needed anymore since the architecture handles the initialization of the kprobe in the return probe trampoline function.) Signed-off-by: Rusty Lynch <rusty.lynch@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 02:17:08 +04:00
if (!err)
init_test_probes();
return err;
}
early_initcall(init_kprobes);
#ifdef CONFIG_DEBUG_FS
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void report_probe(struct seq_file *pi, struct kprobe *p,
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
const char *sym, int offset, char *modname, struct kprobe *pp)
{
char *kprobe_type;
void *addr = p->addr;
if (p->pre_handler == pre_handler_kretprobe)
kprobe_type = "r";
else
kprobe_type = "k";
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
if (!kallsyms_show_value(pi->file->f_cred))
addr = NULL;
if (sym)
seq_printf(pi, "%px %s %s+0x%x %s ",
addr, kprobe_type, sym, offset,
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
(modname ? modname : " "));
else /* try to use %pS */
seq_printf(pi, "%px %s %pS ",
addr, kprobe_type, p->addr);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
if (!pp)
pp = p;
seq_printf(pi, "%s%s%s%s\n",
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
(kprobe_gone(p) ? "[GONE]" : ""),
((kprobe_disabled(p) && !kprobe_gone(p)) ? "[DISABLED]" : ""),
(kprobe_optimized(pp) ? "[OPTIMIZED]" : ""),
(kprobe_ftrace(pp) ? "[FTRACE]" : ""));
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void *kprobe_seq_start(struct seq_file *f, loff_t *pos)
{
return (*pos < KPROBE_TABLE_SIZE) ? pos : NULL;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void *kprobe_seq_next(struct seq_file *f, void *v, loff_t *pos)
{
(*pos)++;
if (*pos >= KPROBE_TABLE_SIZE)
return NULL;
return pos;
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static void kprobe_seq_stop(struct seq_file *f, void *v)
{
/* Nothing to do */
}
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int show_kprobe_addr(struct seq_file *pi, void *v)
{
struct hlist_head *head;
struct kprobe *p, *kp;
const char *sym = NULL;
unsigned int i = *(loff_t *) v;
unsigned long offset = 0;
char *modname, namebuf[KSYM_NAME_LEN];
head = &kprobe_table[i];
preempt_disable();
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 05:06:00 +04:00
hlist_for_each_entry_rcu(p, head, hlist) {
sym = kallsyms_lookup((unsigned long)p->addr, NULL,
&offset, &modname, namebuf);
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
if (kprobe_aggrprobe(p)) {
list_for_each_entry_rcu(kp, &p->list, list)
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
report_probe(pi, kp, sym, offset, modname, p);
} else
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
report_probe(pi, p, sym, offset, modname, NULL);
}
preempt_enable();
return 0;
}
static const struct seq_operations kprobes_sops = {
.start = kprobe_seq_start,
.next = kprobe_seq_next,
.stop = kprobe_seq_stop,
.show = show_kprobe_addr
};
DEFINE_SEQ_ATTRIBUTE(kprobes);
/* kprobes/blacklist -- shows which functions can not be probed */
static void *kprobe_blacklist_seq_start(struct seq_file *m, loff_t *pos)
{
mutex_lock(&kprobe_mutex);
return seq_list_start(&kprobe_blacklist, *pos);
}
static void *kprobe_blacklist_seq_next(struct seq_file *m, void *v, loff_t *pos)
{
return seq_list_next(v, &kprobe_blacklist, pos);
}
static int kprobe_blacklist_seq_show(struct seq_file *m, void *v)
{
struct kprobe_blacklist_entry *ent =
list_entry(v, struct kprobe_blacklist_entry, list);
/*
* If /proc/kallsyms is not showing kernel address, we won't
* show them here either.
*/
if (!kallsyms_show_value(m->file->f_cred))
seq_printf(m, "0x%px-0x%px\t%ps\n", NULL, NULL,
(void *)ent->start_addr);
else
seq_printf(m, "0x%px-0x%px\t%ps\n", (void *)ent->start_addr,
(void *)ent->end_addr, (void *)ent->start_addr);
return 0;
}
static void kprobe_blacklist_seq_stop(struct seq_file *f, void *v)
{
mutex_unlock(&kprobe_mutex);
}
static const struct seq_operations kprobe_blacklist_sops = {
.start = kprobe_blacklist_seq_start,
.next = kprobe_blacklist_seq_next,
.stop = kprobe_blacklist_seq_stop,
.show = kprobe_blacklist_seq_show,
};
DEFINE_SEQ_ATTRIBUTE(kprobe_blacklist);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
static int arm_all_kprobes(void)
{
struct hlist_head *head;
struct kprobe *p;
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
unsigned int i, total = 0, errors = 0;
int err, ret = 0;
mutex_lock(&kprobe_mutex);
/* If kprobes are armed, just return */
if (!kprobes_all_disarmed)
goto already_enabled;
/*
* optimize_kprobe() called by arm_kprobe() checks
* kprobes_all_disarmed, so set kprobes_all_disarmed before
* arm_kprobe.
*/
kprobes_all_disarmed = false;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
/* Arming kprobes doesn't optimize kprobe itself */
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
/* Arm all kprobes on a best-effort basis */
hlist_for_each_entry(p, head, hlist) {
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (!kprobe_disabled(p)) {
err = arm_kprobe(p);
if (err) {
errors++;
ret = err;
}
total++;
}
}
}
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (errors)
pr_warn("Kprobes globally enabled, but failed to arm %d out of %d probes\n",
errors, total);
else
pr_info("Kprobes globally enabled\n");
already_enabled:
mutex_unlock(&kprobe_mutex);
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
return ret;
}
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
static int disarm_all_kprobes(void)
{
struct hlist_head *head;
struct kprobe *p;
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
unsigned int i, total = 0, errors = 0;
int err, ret = 0;
mutex_lock(&kprobe_mutex);
/* If kprobes are already disarmed, just return */
if (kprobes_all_disarmed) {
mutex_unlock(&kprobe_mutex);
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
return 0;
}
kprobes_all_disarmed = true;
kprobes: Introduce kprobes jump optimization Introduce kprobes jump optimization arch-independent parts. Kprobes uses breakpoint instruction for interrupting execution flow, on some architectures, it can be replaced by a jump instruction and interruption emulation code. This gains kprobs' performance drastically. To enable this feature, set CONFIG_OPTPROBES=y (default y if the arch supports OPTPROBE). Changes in v9: - Fix a bug to optimize probe when enabling. - Check nearby probes can be optimize/unoptimize when disarming/arming kprobes, instead of registering/unregistering. This will help kprobe-tracer because most of probes on it are usually disabled. Changes in v6: - Cleanup coding style for readability. - Add comments around get/put_online_cpus(). Changes in v5: - Use get_online_cpus()/put_online_cpus() for avoiding text_mutex deadlock. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Anders Kaseorg <andersk@ksplice.com> Cc: Tim Abbott <tabbott@ksplice.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133407.6725.81992.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 16:34:07 +03:00
for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
head = &kprobe_table[i];
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
/* Disarm all kprobes on a best-effort basis */
hlist_for_each_entry(p, head, hlist) {
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
if (!arch_trampoline_kprobe(p) && !kprobe_disabled(p)) {
err = disarm_kprobe(p, false);
if (err) {
errors++;
ret = err;
}
total++;
}
}
}
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
if (errors)
pr_warn("Kprobes globally disabled, but failed to disarm %d out of %d probes\n",
errors, total);
else
pr_info("Kprobes globally disabled\n");
mutex_unlock(&kprobe_mutex);
/* Wait for disarming all kprobes by optimizer */
wait_for_kprobe_optimizer();
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
return ret;
}
/*
* XXX: The debugfs bool file interface doesn't allow for callbacks
* when the bool state is switched. We can reuse that facility when
* available
*/
static ssize_t read_enabled_file_bool(struct file *file,
char __user *user_buf, size_t count, loff_t *ppos)
{
char buf[3];
if (!kprobes_all_disarmed)
buf[0] = '1';
else
buf[0] = '0';
buf[1] = '\n';
buf[2] = 0x00;
return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
}
static ssize_t write_enabled_file_bool(struct file *file,
const char __user *user_buf, size_t count, loff_t *ppos)
{
char buf[32];
size_t buf_size;
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
int ret = 0;
buf_size = min(count, (sizeof(buf)-1));
if (copy_from_user(buf, user_buf, buf_size))
return -EFAULT;
buf[buf_size] = '\0';
switch (buf[0]) {
case 'y':
case 'Y':
case '1':
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
ret = arm_all_kprobes();
break;
case 'n':
case 'N':
case '0':
kprobes: Propagate error from disarm_kprobe_ftrace() Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:24 +03:00
ret = disarm_all_kprobes();
break;
default:
return -EINVAL;
}
kprobes: Propagate error from arm_kprobe_ftrace() Improve error handling when arming ftrace-based kprobes. Specifically, if we fail to arm a ftrace-based kprobe, register_kprobe()/enable_kprobe() should report an error instead of success. Previously, this has lead to confusing situations where register_kprobe() would return 0 indicating success, but the kprobe would not be functional if ftrace registration during the kprobe arming process had failed. We should therefore take any errors returned by ftrace into account and propagate this error so that we do not register/enable kprobes that cannot be armed. This can happen if, for example, register_ftrace_function() finds an IPMODIFY conflict (since kprobe_ftrace_ops has this flag set) and returns an error. Such a conflict is possible since livepatches also set the IPMODIFY flag for their ftrace_ops. arm_all_kprobes() keeps its current behavior and attempts to arm all kprobes. It returns the last encountered error and gives a warning if not all probes could be armed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-2-jeyu@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-10 02:51:23 +03:00
if (ret)
return ret;
return count;
}
static const struct file_operations fops_kp = {
.read = read_enabled_file_bool,
.write = write_enabled_file_bool,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 20:52:59 +04:00
.llseek = default_llseek,
};
kprobes: Allow probe on some kprobe functions There is no need to prohibit probing on the functions used for preparation, registeration, optimization, controll etc. Those are safely probed because those are not invoked from breakpoint/fault/debug handlers, there is no chance to cause recursive exceptions. Following functions are now removed from the kprobes blacklist: add_new_kprobe aggr_kprobe_disabled alloc_aggr_kprobe alloc_aggr_kprobe arm_all_kprobes __arm_kprobe arm_kprobe arm_kprobe_ftrace check_kprobe_address_safe collect_garbage_slots collect_garbage_slots collect_one_slot debugfs_kprobe_init __disable_kprobe disable_kprobe disarm_all_kprobes __disarm_kprobe disarm_kprobe disarm_kprobe_ftrace do_free_cleaned_kprobes do_optimize_kprobes do_unoptimize_kprobes enable_kprobe force_unoptimize_kprobe free_aggr_kprobe free_aggr_kprobe __free_insn_slot __get_insn_slot get_optimized_kprobe __get_valid_kprobe init_aggr_kprobe init_aggr_kprobe in_nokprobe_functions kick_kprobe_optimizer kill_kprobe kill_optimized_kprobe kprobe_addr kprobe_optimizer kprobe_queued kprobe_seq_next kprobe_seq_start kprobe_seq_stop kprobes_module_callback kprobes_open optimize_all_kprobes optimize_kprobe prepare_kprobe prepare_optimized_kprobe register_aggr_kprobe register_jprobe register_jprobes register_kprobe register_kprobes register_kretprobe register_kretprobe register_kretprobes register_kretprobes report_probe show_kprobe_addr try_to_optimize_kprobe unoptimize_all_kprobes unoptimize_kprobe unregister_jprobe unregister_jprobes unregister_kprobe __unregister_kprobe_bottom unregister_kprobes __unregister_kprobe_top unregister_kretprobe unregister_kretprobe unregister_kretprobes unregister_kretprobes wait_for_kprobe_optimizer I tested those functions by putting kprobes on all instructions in the functions with the bash script I sent to LKML. See: https://lkml.org/lkml/2014/3/27/33 Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081753.26341.57889.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: fche@redhat.com Cc: systemtap@sourceware.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 12:17:54 +04:00
static int __init debugfs_kprobe_init(void)
{
struct dentry *dir;
unsigned int value = 1;
dir = debugfs_create_dir("kprobes", NULL);
debugfs_create_file("list", 0400, dir, NULL, &kprobes_fops);
debugfs_create_file("enabled", 0600, dir, &value, &fops_kp);
debugfs_create_file("blacklist", 0400, dir, NULL,
&kprobe_blacklist_fops);
return 0;
}
late_initcall(debugfs_kprobe_init);
#endif /* CONFIG_DEBUG_FS */