WSL2-Linux-Kernel/arch/powerpc/mm/mmu_context_nohash.c

/*
 * This file contains the routines for handling the MMU on those
 * PowerPC implementations where the MMU is not using the hash
 * table, such as 8xx, 4xx, BookE's etc...
 *
 * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
 *                IBM Corp.
 *
 *  Derived from previous arch/powerpc/mm/mmu_context.c
 *  and arch/powerpc/include/asm/mmu_context.h
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 *
 * TODO:
 *
 *   - The global context lock will not scale very well
 *   - The maps should be dynamically allocated to allow for processors
 *     that support more PID bits at runtime
 *   - Implement flush_tlb_mm() by making the context stale and picking
 *     a new one
 *   - More aggressively clear stale map bits and maybe find some way to
 *     also clear mm->cpu_vm_mask bits when processes are migrated
 */

//#define DEBUG_MAP_CONSISTENCY
//#define DEBUG_CLAMP_LAST_CONTEXT   31
//#define DEBUG_HARDER

/* We don't use DEBUG because it tends to be compiled in always nowadays
 * and this would generate way too much output
 */
#ifdef DEBUG_HARDER
#define pr_hard(args...)	printk(KERN_DEBUG args)
#define pr_hardcont(args...)	printk(KERN_CONT args)
#else
#define pr_hard(args...)	do { } while(0)
#define pr_hardcont(args...)	do { } while(0)
#endif

#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/memblock.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/slab.h>

#include <asm/mmu_context.h>
#include <asm/tlbflush.h>

#include "mmu_decl.h"

/*
 * The MPC8xx has only 16 contexts. We rotate through them on each task switch.
 * A better way would be to keep track of tasks that own contexts, and implement
 * an LRU usage. That way very active tasks don't always have to pay the TLB
 * reload overhead. The kernel pages are mapped shared, so the kernel can run on
 * behalf of any task that makes a kernel entry. Shared does not mean they are
 * not protected, just that the ASID comparison is not performed. -- Dan
 *
 * The IBM4xx has 256 contexts, so we can just rotate through these as a way of
 * "switching" contexts. If the TID of the TLB is zero, the PID/TID comparison
 * is disabled, so we can use a TID of zero to represent all kernel pages as
 * shared among all contexts. -- Dan
 *
 * The IBM 47x core supports 16-bit PIDs, thus 65535 contexts. We should
 * normally never have to steal though the facility is present if needed.
 * -- BenH
 */
#define FIRST_CONTEXT 1
#ifdef DEBUG_CLAMP_LAST_CONTEXT
#define LAST_CONTEXT DEBUG_CLAMP_LAST_CONTEXT
#elif defined(CONFIG_PPC_8xx)
#define LAST_CONTEXT 16
#elif defined(CONFIG_PPC_47x)
#define LAST_CONTEXT 65535
#else
#define LAST_CONTEXT 255
#endif

static unsigned int next_context, nr_free_contexts;
static unsigned long *context_map;
#ifdef CONFIG_SMP
static unsigned long *stale_map[NR_CPUS];
#endif
static struct mm_struct **context_mm;
static DEFINE_RAW_SPINLOCK(context_lock);

#define CTX_MAP_SIZE	\
	(sizeof(unsigned long) * (LAST_CONTEXT / BITS_PER_LONG + 1))


/* Steal a context from a task that has one at the moment.
 *
 * This is used when we are running out of available PID numbers
 * on the processors.
 *
 * This isn't an LRU system, it just frees up each context in
 * turn (sort-of pseudo-random replacement :).  This would be the
 * place to implement an LRU scheme if anyone was motivated to do it.
 *  -- paulus
 *
 * For context stealing, we use a slightly different approach for
 * SMP and UP. Basically, the UP one is simpler and doesn't use
 * the stale map as we can just flush the local CPU
 *  -- benh
 */
#ifdef CONFIG_SMP
static unsigned int steal_context_smp(unsigned int id)
{
	struct mm_struct *mm;
	unsigned int cpu, max, i;

	max = LAST_CONTEXT - FIRST_CONTEXT;

	/* Attempt to free next_context first and then loop until we manage */
	while (max--) {
		/* Pick up the victim mm */
		mm = context_mm[id];

		/* We have a candidate victim, check if it's active, on SMP
		 * we cannot steal active contexts
		 */
		if (mm->context.active) {
			id++;
			if (id > LAST_CONTEXT)
				id = FIRST_CONTEXT;
			continue;
		}
		pr_hardcont(" | steal %d from 0x%p", id, mm);

		/* Mark this mm has having no context anymore */
		mm->context.id = MMU_NO_CONTEXT;

		/* Mark it stale on all CPUs that used this mm. For threaded
		 * implementations, we set it on all threads on each core
		 * represented in the mask. A future implementation will use
		 * a core map instead but this will do for now.
		 */
		for_each_cpu(cpu, mm_cpumask(mm)) {
			for (i = cpu_first_thread_sibling(cpu);
			     i <= cpu_last_thread_sibling(cpu); i++) {
				if (stale_map[i])
					__set_bit(id, stale_map[i]);
			}
			cpu = i - 1;
		}
		return id;
	}

	/* This will happen if you have more CPUs than available contexts,
	 * all we can do here is wait a bit and try again
	 */
	raw_spin_unlock(&context_lock);
	cpu_relax();
	raw_spin_lock(&context_lock);

	/* This will cause the caller to try again */
	return MMU_NO_CONTEXT;
}
#endif  /* CONFIG_SMP */

static unsigned int steal_all_contexts(void)
{
	struct mm_struct *mm;
#ifdef CONFIG_SMP
	int cpu = smp_processor_id();
#endif
	unsigned int id;

	for (id = FIRST_CONTEXT; id <= LAST_CONTEXT; id++) {
		/* Pick up the victim mm */
		mm = context_mm[id];

		pr_hardcont(" | steal %d from 0x%p", id, mm);

		/* Mark this mm as having no context anymore */
		mm->context.id = MMU_NO_CONTEXT;
		if (id != FIRST_CONTEXT) {
			context_mm[id] = NULL;
			__clear_bit(id, context_map);
#ifdef DEBUG_MAP_CONSISTENCY
			mm->context.active = 0;
#endif
		}
#ifdef CONFIG_SMP
		__clear_bit(id, stale_map[cpu]);
#endif
	}

	/* Flush the TLB for all contexts (not to be used on SMP) */
	_tlbil_all();

	nr_free_contexts = LAST_CONTEXT - FIRST_CONTEXT;

	return FIRST_CONTEXT;
}

/* Note that this will also be called on SMP if all other CPUs are
 * offlined, which means that it may be called for cpu != 0. For
 * this to work, we somewhat assume that CPUs that are onlined
 * come up with a fully clean TLB (or are cleaned when offlined)
 */
static unsigned int steal_context_up(unsigned int id)
{
	struct mm_struct *mm;
#ifdef CONFIG_SMP
	int cpu = smp_processor_id();
#endif

	/* Pick up the victim mm */
	mm = context_mm[id];

	pr_hardcont(" | steal %d from 0x%p", id, mm);

	/* Flush the TLB for that context */
	local_flush_tlb_mm(mm);

	/* Mark this mm has having no context anymore */
	mm->context.id = MMU_NO_CONTEXT;

	/* XXX This clear should ultimately be part of local_flush_tlb_mm */
#ifdef CONFIG_SMP
	__clear_bit(id, stale_map[cpu]);
#endif

	return id;
}

#ifdef DEBUG_MAP_CONSISTENCY
static void context_check_map(void)
{
	unsigned int id, nrf, nact;

	nrf = nact = 0;
	for (id = FIRST_CONTEXT; id <= LAST_CONTEXT; id++) {
		int used = test_bit(id, context_map);
		if (!used)
			nrf++;
		if (used != (context_mm[id] != NULL))
			pr_err("MMU: Context %d is %s and MM is %p !\n",
			       id, used ? "used" : "free", context_mm[id]);
		if (context_mm[id] != NULL)
			nact += context_mm[id]->context.active;
	}
	if (nrf != nr_free_contexts) {
		pr_err("MMU: Free context count out of sync ! (%d vs %d)\n",
		       nr_free_contexts, nrf);
		nr_free_contexts = nrf;
	}
	if (nact > num_online_cpus())
		pr_err("MMU: More active contexts than CPUs ! (%d vs %d)\n",
		       nact, num_online_cpus());
	if (FIRST_CONTEXT > 0 && !test_bit(0, context_map))
		pr_err("MMU: Context 0 has been freed !!!\n");
}
#else
static void context_check_map(void) { }
#endif

void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next,
			struct task_struct *tsk)
{
	unsigned int id;
#ifdef CONFIG_SMP
	unsigned int i, cpu = smp_processor_id();
#endif
	unsigned long *map;

	/* No lockless fast path .. yet */
	raw_spin_lock(&context_lock);

	pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
		cpu, next, next->context.active, next->context.id);

#ifdef CONFIG_SMP
	/* Mark us active and the previous one not anymore */
	next->context.active++;
	if (prev) {
		pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
		WARN_ON(prev->context.active < 1);
		prev->context.active--;
	}

 again:
#endif /* CONFIG_SMP */

	/* If we already have a valid assigned context, skip all that */
	id = next->context.id;
	if (likely(id != MMU_NO_CONTEXT)) {
#ifdef DEBUG_MAP_CONSISTENCY
		if (context_mm[id] != next)
			pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
			       next, id, id, context_mm[id]);
#endif
		goto ctxt_ok;
	}

	/* We really don't have a context, let's try to acquire one */
	id = next_context;
	if (id > LAST_CONTEXT)
		id = FIRST_CONTEXT;
	map = context_map;

	/* No more free contexts, let's try to steal one */
	if (nr_free_contexts == 0) {
#ifdef CONFIG_SMP
		if (num_online_cpus() > 1) {
			id = steal_context_smp(id);
			if (id == MMU_NO_CONTEXT)
				goto again;
			goto stolen;
		}
#endif /* CONFIG_SMP */
		if (IS_ENABLED(CONFIG_PPC_8xx))
			id = steal_all_contexts();
		else
			id = steal_context_up(id);
		goto stolen;
	}
	nr_free_contexts--;

	/* We know there's at least one free context, try to find it */
	while (__test_and_set_bit(id, map)) {
		id = find_next_zero_bit(map, LAST_CONTEXT+1, id);
		if (id > LAST_CONTEXT)
			id = FIRST_CONTEXT;
	}
 stolen:
	next_context = id + 1;
	context_mm[id] = next;
	next->context.id = id;
	pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);

	context_check_map();
 ctxt_ok:

	/* If that context got marked stale on this CPU, then flush the
	 * local TLB for it and unmark it before we use it
	 */
#ifdef CONFIG_SMP
	if (test_bit(id, stale_map[cpu])) {
		pr_hardcont(" | stale flush %d [%d..%d]",
			    id, cpu_first_thread_sibling(cpu),
			    cpu_last_thread_sibling(cpu));

		local_flush_tlb_mm(next);

		/* XXX This clear should ultimately be part of local_flush_tlb_mm */
		for (i = cpu_first_thread_sibling(cpu);
		     i <= cpu_last_thread_sibling(cpu); i++) {
			if (stale_map[i])
				__clear_bit(id, stale_map[i]);
		}
	}
#endif

	/* Flick the MMU and release lock */
	pr_hardcont(" -> %d\n", id);
	set_context(id, next->pgd);
	raw_spin_unlock(&context_lock);
}

/*
 * Set up the context for a new address space.
 */
int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
	pr_hard("initing context for mm @%p\n", mm);

#ifdef	CONFIG_PPC_MM_SLICES
	/*
	 * We have MMU_NO_CONTEXT set to be ~0. Hence check
	 * explicitly against context.id == 0. This ensures that we properly
	 * initialize context slice details for newly allocated mm's (which will
	 * have id == 0) and don't alter context slice inherited via fork (which
	 * will have id != 0).
	 */
	if (mm->context.id == 0)
		slice_init_new_context_exec(mm);
#endif
	mm->context.id = MMU_NO_CONTEXT;
	mm->context.active = 0;
	return 0;
}

/*
 * We're finished using the context for an address space.
 */
void destroy_context(struct mm_struct *mm)
{
	unsigned long flags;
	unsigned int id;

	if (mm->context.id == MMU_NO_CONTEXT)
		return;

	WARN_ON(mm->context.active != 0);

	raw_spin_lock_irqsave(&context_lock, flags);
	id = mm->context.id;
	if (id != MMU_NO_CONTEXT) {
		__clear_bit(id, context_map);
		mm->context.id = MMU_NO_CONTEXT;
#ifdef DEBUG_MAP_CONSISTENCY
		mm->context.active = 0;
#endif
		context_mm[id] = NULL;
		nr_free_contexts++;
	}
	raw_spin_unlock_irqrestore(&context_lock, flags);
}

#ifdef CONFIG_SMP
static int mmu_ctx_cpu_prepare(unsigned int cpu)
{
	/* We don't touch CPU 0 map, it's allocated at aboot and kept
	 * around forever
	 */
	if (cpu == boot_cpuid)
		return 0;

	pr_devel("MMU: Allocating stale context map for CPU %d\n", cpu);
	stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
	return 0;
}

static int mmu_ctx_cpu_dead(unsigned int cpu)
{
#ifdef CONFIG_HOTPLUG_CPU
	if (cpu == boot_cpuid)
		return 0;

	pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
	kfree(stale_map[cpu]);
	stale_map[cpu] = NULL;

	/* We also clear the cpu_vm_mask bits of CPUs going away */
	clear_tasks_mm_cpumask(cpu);
#endif
	return 0;
}

#endif /* CONFIG_SMP */

/*
 * Initialize the context management stuff.
 */
void __init mmu_context_init(void)
{
	/* Mark init_mm as being active on all possible CPUs since
	 * we'll get called with prev == init_mm the first time
	 * we schedule on a given CPU
	 */
	init_mm.context.active = NR_CPUS;

	/*
	 * Allocate the maps used by context management
	 */
	context_map = memblock_alloc(CTX_MAP_SIZE, SMP_CACHE_BYTES);
	context_mm = memblock_alloc(sizeof(void *) * (LAST_CONTEXT + 1),
				    SMP_CACHE_BYTES);
#ifdef CONFIG_SMP
	stale_map[boot_cpuid] = memblock_alloc(CTX_MAP_SIZE, SMP_CACHE_BYTES);

	cpuhp_setup_state_nocalls(CPUHP_POWERPC_MMU_CTX_PREPARE,
				  "powerpc/mmu/ctx:prepare",
				  mmu_ctx_cpu_prepare, mmu_ctx_cpu_dead);
#endif

	printk(KERN_INFO
	       "MMU: Allocated %zu bytes of context maps for %d contexts\n",
	       2 * CTX_MAP_SIZE + (sizeof(void *) * (LAST_CONTEXT + 1)),
	       LAST_CONTEXT - FIRST_CONTEXT + 1);

	/*
	 * Some processors have too few contexts to reserve one for
	 * init_mm, and require using context 0 for a normal task.
	 * Other processors reserve the use of context zero for the kernel.
	 * This code assumes FIRST_CONTEXT < 32.
	 */
	context_map[0] = (1 << FIRST_CONTEXT) - 1;
	next_context = FIRST_CONTEXT;
	nr_free_contexts = LAST_CONTEXT - FIRST_CONTEXT + 1;
}