WSL2-Linux-Kernel/include/linux/smp.h

185 строки
4.5 KiB
C
Исходник Обычный вид История

#ifndef __LINUX_SMP_H
#define __LINUX_SMP_H
/*
* Generic SMP support
* Alan Cox. <alan@redhat.com>
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/cpumask.h>
#include <linux/init.h>
extern void cpu_idle(void);
typedef void (*smp_call_func_t)(void *info);
struct call_single_data {
struct list_head list;
smp_call_func_t func;
void *info;
u16 flags;
u16 priv;
};
cpumask: add sysfs displays for configured and disabled cpu maps Impact: add new sysfs files. Add sysfs files "kernel_max" and "offline" to display the max CPU index allowed (NR_CPUS-1), and the map of cpus that are offline. Cpus can be offlined via HOTPLUG, disabled by the BIOS ACPI tables, or if they exceed the number of cpus allowed by the NR_CPUS config option, or the "maxcpus=NUM" kernel start parameter. The "possible_cpus=NUM" parameter can also extend the number of possible cpus allowed, in which case the cpus not present at startup will be in the offline state. (These cpus can be HOTPLUGGED ON after system startup [pending a follow-on patch to provide the capability via the /sys/devices/sys/cpu/cpuN/online mechanism to bring them online.]) By design, the "offlined cpus > possible cpus" display will always use the following formats: * all possible cpus online: "x$" or "x-y$" * some possible cpus offline: ".*,x$" or ".*,x-y$" where: x == number of possible cpus (nr_cpu_ids); and y == number of cpus >= NR_CPUS or maxcpus (if y > x). One use of this feature is for distros to select (or configure) the appropriate kernel to install for the resident system. Notes: * cpus offlined <= possible cpus will be printed for all architectures. * cpus offlined > possible cpus will only be printed for arches that set 'total_cpus' [X86 only in this patch]. Based on tip/cpus4096 + .../rusty/linux-2.6-for-ingo.git/master + x86-only-patches sent 12/15. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-16 07:26:48 +03:00
/* total number of cpus in this system (may exceed NR_CPUS) */
extern unsigned int total_cpus;
int smp_call_function_single(int cpuid, smp_call_func_t func, void *info,
int wait);
#ifdef CONFIG_SMP
#include <linux/preempt.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/thread_info.h>
#include <asm/smp.h>
/*
* main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
* (defined in asm header):
*/
/*
* stops all CPUs but the current one:
*/
extern void smp_send_stop(void);
/*
* sends a 'reschedule' event to another CPU:
*/
extern void smp_send_reschedule(int cpu);
/*
* Prepare machine for booting other CPUs.
*/
extern void smp_prepare_cpus(unsigned int max_cpus);
/*
* Bring a CPU up
*/
extern int __cpu_up(unsigned int cpunum);
/*
* Final polishing of CPUs
*/
extern void smp_cpus_done(unsigned int max_cpus);
/*
* Call a function on all other processors
*/
int smp_call_function(smp_call_func_t func, void *info, int wait);
void smp_call_function_many(const struct cpumask *mask,
smp_call_func_t func, void *info, bool wait);
void __smp_call_function_single(int cpuid, struct call_single_data *data,
int wait);
int smp_call_function_any(const struct cpumask *mask,
smp_call_func_t func, void *info, int wait);
/*
* Generic and arch helpers
*/
#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Milton Miller <miltonm@bga.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-29 20:35:04 +04:00
void __init call_function_init(void);
void generic_smp_call_function_single_interrupt(void);
void generic_smp_call_function_interrupt(void);
void ipi_call_lock(void);
void ipi_call_unlock(void);
void ipi_call_lock_irq(void);
void ipi_call_unlock_irq(void);
generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Milton Miller <miltonm@bga.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-29 20:35:04 +04:00
#else
static inline void call_function_init(void) { }
#endif
/*
* Call a function on all processors
*/
int on_each_cpu(smp_call_func_t func, void *info, int wait);
/*
* Mark the boot cpu "online" so that it can call console drivers in
* printk() and can access its per-cpu storage.
*/
void smp_prepare_boot_cpu(void);
extern unsigned int setup_max_cpus;
extern void __init setup_nr_cpu_ids(void);
extern void __init smp_init(void);
#else /* !SMP */
static inline void smp_send_stop(void) { }
/*
* These macros fold the SMP functionality into a single CPU system
*/
#define raw_smp_processor_id() 0
static inline int up_smp_call_function(smp_call_func_t func, void *info)
{
return 0;
}
#define smp_call_function(func, info, wait) \
(up_smp_call_function(func, info))
#define on_each_cpu(func,info,wait) \
({ \
local_irq_disable(); \
func(info); \
local_irq_enable(); \
0; \
})
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
#define smp_prepare_boot_cpu() do {} while (0)
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Milton Miller <miltonm@bga.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-29 20:35:04 +04:00
static inline void call_function_init(void) { }
static inline int
smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
void *info, int wait)
{
return smp_call_function_single(0, func, info, wait);
}
#endif /* !SMP */
/*
* smp_processor_id(): get the current CPU ID.
*
* if DEBUG_PREEMPT is enabled then we check whether it is
* used in a preemption-safe way. (smp_processor_id() is safe
* if it's used in a preemption-off critical section, or in
* a thread that is bound to the current CPU.)
*
* NOTE: raw_smp_processor_id() is for internal use only
* (smp_processor_id() is the preferred variant), but in rare
* instances it might also be used to turn off false positives
* (i.e. smp_processor_id() use that the debugging code reports but
* which use for some reason is legal). Don't use this to hack around
* the warning message, as your code might not work under PREEMPT.
*/
#ifdef CONFIG_DEBUG_PREEMPT
extern unsigned int debug_smp_processor_id(void);
# define smp_processor_id() debug_smp_processor_id()
#else
# define smp_processor_id() raw_smp_processor_id()
#endif
#define get_cpu() ({ preempt_disable(); smp_processor_id(); })
#define put_cpu() preempt_enable()
/*
* Callback to arch code if there's nosmp or maxcpus=0 on the
* boot command line:
*/
extern void arch_disable_smp_support(void);
void smp_setup_processor_id(void);
#endif /* __LINUX_SMP_H */