WSL2-Linux-Kernel/drivers/ssbi/Kconfig

#
# SSBI bus support
#

menu "Qualcomm MSM SSBI bus support"

config SSBI
	tristate "Qualcomm Single-wire Serial Bus Interface (SSBI)"
	help
	  If you say yes to this option, support will be included for the
	  built-in SSBI interface on Qualcomm MSM family processors.

	  This is required for communicating with Qualcomm PMICs and
	  other devices that have the SSBI interface.

endmenu
add single-wire serial bus interface (SSBI) driver SSBI is the Qualcomm single-wire serial bus interface used to connect the MSM devices to the PMIC and other devices. Since SSBI only supports a single slave, the driver gets the name of the slave device passed in from the board file through the master device's platform data. SSBI registers pretty early (postcore), so that the PMIC can come up before the board init. This is useful if the board init requires the use of gpios that are connected through the PMIC. Based on a patch by Dima Zavin <dima@android.com> that can be found at: http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=eb060bac4 This patch adds PMIC Arbiter support for the MSM8660. The PMIC Arbiter is a hardware wrapper around the SSBI 2.0 controller that is designed to overcome concurrency issues and security limitations. A controller_type field is added to the platform data to specify the type of the SSBI controller (1.0, 2.0, or PMIC Arbiter). [davidb@codeaurora.org: I've moved this driver into drivers/ssbi/ and added an include for linux/module.h so that it will compile] Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 22:41:46 +04:00			`#`
SSBI: Remove MSM_ prefix from SSBI drivers Although the SSBI sub is currently only used on MSM SoCs, it is still a bus in its own right. Remove this msm_ prefix from the driver and it's symbols. Clients can now refer directly to ssbi_write() and ssbi_read(). Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 22:41:54 +04:00			`# SSBI bus support`
add single-wire serial bus interface (SSBI) driver SSBI is the Qualcomm single-wire serial bus interface used to connect the MSM devices to the PMIC and other devices. Since SSBI only supports a single slave, the driver gets the name of the slave device passed in from the board file through the master device's platform data. SSBI registers pretty early (postcore), so that the PMIC can come up before the board init. This is useful if the board init requires the use of gpios that are connected through the PMIC. Based on a patch by Dima Zavin <dima@android.com> that can be found at: http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=eb060bac4 This patch adds PMIC Arbiter support for the MSM8660. The PMIC Arbiter is a hardware wrapper around the SSBI 2.0 controller that is designed to overcome concurrency issues and security limitations. A controller_type field is added to the platform data to specify the type of the SSBI controller (1.0, 2.0, or PMIC Arbiter). [davidb@codeaurora.org: I've moved this driver into drivers/ssbi/ and added an include for linux/module.h so that it will compile] Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 22:41:46 +04:00			`#`

			`menu "Qualcomm MSM SSBI bus support"`

SSBI: Remove MSM_ prefix from SSBI drivers Although the SSBI sub is currently only used on MSM SoCs, it is still a bus in its own right. Remove this msm_ prefix from the driver and it's symbols. Clients can now refer directly to ssbi_write() and ssbi_read(). Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 22:41:54 +04:00			`config SSBI`
ssbi: Allow compilation as a module The ssbi driver's read/write entry points are protected with wrappers in the case when the driver isn't enabled. These wrappers don't make any sense, since a client of the SSBI bus won't work without it. Make these just regular functions, so that the SSBI driver can be built as a module. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 22:41:49 +04:00			`tristate "Qualcomm Single-wire Serial Bus Interface (SSBI)"`
add single-wire serial bus interface (SSBI) driver SSBI is the Qualcomm single-wire serial bus interface used to connect the MSM devices to the PMIC and other devices. Since SSBI only supports a single slave, the driver gets the name of the slave device passed in from the board file through the master device's platform data. SSBI registers pretty early (postcore), so that the PMIC can come up before the board init. This is useful if the board init requires the use of gpios that are connected through the PMIC. Based on a patch by Dima Zavin <dima@android.com> that can be found at: http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=eb060bac4 This patch adds PMIC Arbiter support for the MSM8660. The PMIC Arbiter is a hardware wrapper around the SSBI 2.0 controller that is designed to overcome concurrency issues and security limitations. A controller_type field is added to the platform data to specify the type of the SSBI controller (1.0, 2.0, or PMIC Arbiter). [davidb@codeaurora.org: I've moved this driver into drivers/ssbi/ and added an include for linux/module.h so that it will compile] Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-03-12 22:41:46 +04:00			`help`
			`If you say yes to this option, support will be included for the`
			`built-in SSBI interface on Qualcomm MSM family processors.`

			`This is required for communicating with Qualcomm PMICs and`
			`other devices that have the SSBI interface.`

			`endmenu`