WSL2-Linux-Kernel/fs/btrfs/ordered-data.c

940 строки
26 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2007 Oracle. All rights reserved.
*/
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/writeback.h>
#include <linux/sched/mm.h>
#include "misc.h"
#include "ctree.h"
#include "transaction.h"
#include "btrfs_inode.h"
#include "extent_io.h"
#include "disk-io.h"
#include "compression.h"
#include "delalloc-space.h"
btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-10 04:04:43 +03:00
#include "qgroup.h"
static struct kmem_cache *btrfs_ordered_extent_cache;
static u64 entry_end(struct btrfs_ordered_extent *entry)
{
if (entry->file_offset + entry->num_bytes < entry->file_offset)
return (u64)-1;
return entry->file_offset + entry->num_bytes;
}
/* returns NULL if the insertion worked, or it returns the node it did find
* in the tree
*/
static struct rb_node *tree_insert(struct rb_root *root, u64 file_offset,
struct rb_node *node)
{
struct rb_node **p = &root->rb_node;
struct rb_node *parent = NULL;
struct btrfs_ordered_extent *entry;
while (*p) {
parent = *p;
entry = rb_entry(parent, struct btrfs_ordered_extent, rb_node);
if (file_offset < entry->file_offset)
p = &(*p)->rb_left;
else if (file_offset >= entry_end(entry))
p = &(*p)->rb_right;
else
return parent;
}
rb_link_node(node, parent, p);
rb_insert_color(node, root);
return NULL;
}
/*
* look for a given offset in the tree, and if it can't be found return the
* first lesser offset
*/
static struct rb_node *__tree_search(struct rb_root *root, u64 file_offset,
struct rb_node **prev_ret)
{
struct rb_node *n = root->rb_node;
struct rb_node *prev = NULL;
struct rb_node *test;
struct btrfs_ordered_extent *entry;
struct btrfs_ordered_extent *prev_entry = NULL;
while (n) {
entry = rb_entry(n, struct btrfs_ordered_extent, rb_node);
prev = n;
prev_entry = entry;
if (file_offset < entry->file_offset)
n = n->rb_left;
else if (file_offset >= entry_end(entry))
n = n->rb_right;
else
return n;
}
if (!prev_ret)
return NULL;
while (prev && file_offset >= entry_end(prev_entry)) {
test = rb_next(prev);
if (!test)
break;
prev_entry = rb_entry(test, struct btrfs_ordered_extent,
rb_node);
if (file_offset < entry_end(prev_entry))
break;
prev = test;
}
if (prev)
prev_entry = rb_entry(prev, struct btrfs_ordered_extent,
rb_node);
while (prev && file_offset < entry_end(prev_entry)) {
test = rb_prev(prev);
if (!test)
break;
prev_entry = rb_entry(test, struct btrfs_ordered_extent,
rb_node);
prev = test;
}
*prev_ret = prev;
return NULL;
}
/*
* helper to check if a given offset is inside a given entry
*/
static int offset_in_entry(struct btrfs_ordered_extent *entry, u64 file_offset)
{
if (file_offset < entry->file_offset ||
entry->file_offset + entry->num_bytes <= file_offset)
return 0;
return 1;
}
static int range_overlaps(struct btrfs_ordered_extent *entry, u64 file_offset,
u64 len)
{
if (file_offset + len <= entry->file_offset ||
entry->file_offset + entry->num_bytes <= file_offset)
return 0;
return 1;
}
/*
* look find the first ordered struct that has this offset, otherwise
* the first one less than this offset
*/
static inline struct rb_node *tree_search(struct btrfs_ordered_inode_tree *tree,
u64 file_offset)
{
struct rb_root *root = &tree->tree;
struct rb_node *prev = NULL;
struct rb_node *ret;
struct btrfs_ordered_extent *entry;
if (tree->last) {
entry = rb_entry(tree->last, struct btrfs_ordered_extent,
rb_node);
if (offset_in_entry(entry, file_offset))
return tree->last;
}
ret = __tree_search(root, file_offset, &prev);
if (!ret)
ret = prev;
if (ret)
tree->last = ret;
return ret;
}
btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-10 04:04:43 +03:00
/*
* Allocate and add a new ordered_extent into the per-inode tree.
*
* The tree is given a single reference on the ordered extent that was
* inserted.
*/
static int __btrfs_add_ordered_extent(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes,
u64 disk_num_bytes, int type, int dio,
int compress_type)
{
struct btrfs_root *root = inode->root;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_ordered_inode_tree *tree = &inode->ordered_tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry;
btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-10 04:04:43 +03:00
int ret;
if (type == BTRFS_ORDERED_NOCOW || type == BTRFS_ORDERED_PREALLOC) {
/* For nocow write, we can release the qgroup rsv right now */
ret = btrfs_qgroup_free_data(inode, NULL, file_offset, num_bytes);
btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-10 04:04:43 +03:00
if (ret < 0)
return ret;
ret = 0;
} else {
/*
* The ordered extent has reserved qgroup space, release now
* and pass the reserved number for qgroup_record to free.
*/
ret = btrfs_qgroup_release_data(inode, file_offset, num_bytes);
btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-10 04:04:43 +03:00
if (ret < 0)
return ret;
}
entry = kmem_cache_zalloc(btrfs_ordered_extent_cache, GFP_NOFS);
if (!entry)
return -ENOMEM;
entry->file_offset = file_offset;
entry->disk_bytenr = disk_bytenr;
entry->num_bytes = num_bytes;
entry->disk_num_bytes = disk_num_bytes;
entry->bytes_left = num_bytes;
entry->inode = igrab(&inode->vfs_inode);
entry->compress_type = compress_type;
entry->truncated_len = (u64)-1;
btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak [BUG] The following simple workload from fsstress can lead to qgroup reserved data space leak: 0/0: creat f0 x:0 0 0 0/0: creat add id=0,parent=-1 0/1: write f0[259 1 0 0 0 0] [600030,27288] 0 0/4: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 64 627318] return 25, fallback to stat() 0/4: dwrite f0[259 1 0 0 64 627318] [610304,106496] 0 This would cause btrfs qgroup to leak 20480 bytes for data reserved space. If btrfs qgroup limit is enabled, such leak can lead to unexpected early EDQUOT and unusable space. [CAUSE] When doing direct IO, kernel will try to writeback existing buffered page cache, then invalidate them: generic_file_direct_write() |- filemap_write_and_wait_range(); |- invalidate_inode_pages2_range(); However for btrfs, the bi_end_io hook doesn't finish all its heavy work right after bio ends. In fact, it delays its work further: submit_extent_page(end_io_func=end_bio_extent_writepage); end_bio_extent_writepage() |- btrfs_writepage_endio_finish_ordered() |- btrfs_init_work(finish_ordered_fn); <<< Work queue execution >>> finish_ordered_fn() |- btrfs_finish_ordered_io(); |- Clear qgroup bits This means, when filemap_write_and_wait_range() returns, btrfs_finish_ordered_io() is not guaranteed to be executed, thus the qgroup bits for related range are not cleared. Now into how the leak happens, this will only focus on the overlapping part of buffered and direct IO part. 1. After buffered write The inode had the following range with QGROUP_RESERVED bit: 596 616K |///////////////| Qgroup reserved data space: 20K 2. Writeback part for range [596K, 616K) Write back finished, but btrfs_finish_ordered_io() not get called yet. So we still have: 596K 616K |///////////////| Qgroup reserved data space: 20K 3. Pages for range [596K, 616K) get released This will clear all qgroup bits, but don't update the reserved data space. So we have: 596K 616K | | Qgroup reserved data space: 20K That number doesn't match the qgroup bit range anymore. 4. Dio prepare space for range [596K, 700K) Qgroup reserved data space for that range, we got: 596K 616K 700K |///////////////|///////////////////////| Qgroup reserved data space: 20K + 104K = 124K 5. btrfs_finish_ordered_range() gets executed for range [596K, 616K) Qgroup free reserved space for that range, we got: 596K 616K 700K | |///////////////////////| We need to free that range of reserved space. Qgroup reserved data space: 124K - 20K = 104K 6. btrfs_finish_ordered_range() gets executed for range [596K, 700K) However qgroup bit for range [596K, 616K) is already cleared in previous step, so we only free 84K for qgroup reserved space. 596K 616K 700K | | | We need to free that range of reserved space. Qgroup reserved data space: 104K - 84K = 20K Now there is no way to release that 20K unless disabling qgroup or unmounting the fs. [FIX] This patch will change the timing of btrfs_qgroup_release/free_data() call. Here it uses buffered COW write as an example. The new timing | The old timing ----------------------------------------+--------------------------------------- btrfs_buffered_write() | btrfs_buffered_write() |- btrfs_qgroup_reserve_data() | |- btrfs_qgroup_reserve_data() | btrfs_run_delalloc_range() | btrfs_run_delalloc_range() |- btrfs_add_ordered_extent() | |- btrfs_qgroup_release_data() | The reserved is passed into | btrfs_ordered_extent structure | | btrfs_finish_ordered_io() | btrfs_finish_ordered_io() |- The reserved space is passed to | |- btrfs_qgroup_release_data() btrfs_qgroup_record | The resereved space is passed | to btrfs_qgroup_recrod | btrfs_qgroup_account_extents() | btrfs_qgroup_account_extents() |- btrfs_qgroup_free_refroot() | |- btrfs_qgroup_free_refroot() The point of such change is to ensure, when ordered extents are submitted, the qgroup reserved space is already released, to keep the timing aligned with file_write_and_wait_range(). So that qgroup data reserved space is all bound to btrfs_ordered_extent and solve the timing mismatch. Fixes: f695fdcef83a ("btrfs: qgroup: Introduce functions to release/free qgroup reserve data space") Suggested-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-10 04:04:43 +03:00
entry->qgroup_rsv = ret;
btrfs: rework the order of btrfs_ordered_extent::flags [BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-21 09:13:54 +03:00
ASSERT(type == BTRFS_ORDERED_REGULAR ||
type == BTRFS_ORDERED_NOCOW ||
type == BTRFS_ORDERED_PREALLOC ||
type == BTRFS_ORDERED_COMPRESSED);
set_bit(type, &entry->flags);
if (dio) {
percpu_counter_add_batch(&fs_info->dio_bytes, num_bytes,
fs_info->delalloc_batch);
set_bit(BTRFS_ORDERED_DIRECT, &entry->flags);
}
/* one ref for the tree */
refcount_set(&entry->refs, 1);
init_waitqueue_head(&entry->wait);
INIT_LIST_HEAD(&entry->list);
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 14:43:58 +03:00
INIT_LIST_HEAD(&entry->log_list);
INIT_LIST_HEAD(&entry->root_extent_list);
INIT_LIST_HEAD(&entry->work_list);
init_completion(&entry->completion);
trace_btrfs_ordered_extent_add(inode, entry);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 14:18:59 +03:00
spin_lock_irq(&tree->lock);
node = tree_insert(&tree->tree, file_offset,
&entry->rb_node);
if (node)
btrfs_panic(fs_info, -EEXIST,
"inconsistency in ordered tree at offset %llu",
file_offset);
spin_unlock_irq(&tree->lock);
spin_lock(&root->ordered_extent_lock);
list_add_tail(&entry->root_extent_list,
&root->ordered_extents);
root->nr_ordered_extents++;
if (root->nr_ordered_extents == 1) {
spin_lock(&fs_info->ordered_root_lock);
BUG_ON(!list_empty(&root->ordered_root));
list_add_tail(&root->ordered_root, &fs_info->ordered_roots);
spin_unlock(&fs_info->ordered_root_lock);
}
spin_unlock(&root->ordered_extent_lock);
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-19 21:15:55 +03:00
/*
* We don't need the count_max_extents here, we can assume that all of
* that work has been done at higher layers, so this is truly the
* smallest the extent is going to get.
*/
spin_lock(&inode->lock);
btrfs_mod_outstanding_extents(inode, 1);
spin_unlock(&inode->lock);
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-19 21:15:55 +03:00
return 0;
}
int btrfs_add_ordered_extent(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes, u64 disk_num_bytes,
int type)
{
btrfs: rework the order of btrfs_ordered_extent::flags [BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-21 09:13:54 +03:00
ASSERT(type == BTRFS_ORDERED_REGULAR ||
type == BTRFS_ORDERED_NOCOW ||
type == BTRFS_ORDERED_PREALLOC);
return __btrfs_add_ordered_extent(inode, file_offset, disk_bytenr,
num_bytes, disk_num_bytes, type, 0,
BTRFS_COMPRESS_NONE);
}
int btrfs_add_ordered_extent_dio(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes,
u64 disk_num_bytes, int type)
{
btrfs: rework the order of btrfs_ordered_extent::flags [BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-21 09:13:54 +03:00
ASSERT(type == BTRFS_ORDERED_REGULAR ||
type == BTRFS_ORDERED_NOCOW ||
type == BTRFS_ORDERED_PREALLOC);
return __btrfs_add_ordered_extent(inode, file_offset, disk_bytenr,
num_bytes, disk_num_bytes, type, 1,
BTRFS_COMPRESS_NONE);
}
int btrfs_add_ordered_extent_compress(struct btrfs_inode *inode, u64 file_offset,
u64 disk_bytenr, u64 num_bytes,
btrfs: rework the order of btrfs_ordered_extent::flags [BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-21 09:13:54 +03:00
u64 disk_num_bytes, int compress_type)
{
btrfs: rework the order of btrfs_ordered_extent::flags [BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-21 09:13:54 +03:00
ASSERT(compress_type != BTRFS_COMPRESS_NONE);
return __btrfs_add_ordered_extent(inode, file_offset, disk_bytenr,
btrfs: rework the order of btrfs_ordered_extent::flags [BUG] There is a long existing bug in the last parameter of btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize compressed writeback and reads") back to 2008. In that ancient commit btrfs_add_ordered_extent() expects the @type parameter to be one of the following: - BTRFS_ORDERED_REGULAR - BTRFS_ORDERED_NOCOW - BTRFS_ORDERED_PREALLOC - BTRFS_ORDERED_COMPRESSED But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE. Ironically extra check in __btrfs_add_ordered_extent() won't set the bit if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any obvious bug. But this still leads to regular COW ordered extent having no bit to indicate its type in various trace events, rendering REGULAR bit useless. [FIX] Change the following aspects to avoid such problem: - Reorder btrfs_ordered_extent::flags Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR. - Add extra ASSERT() for btrfs_add_ordered_extent_*() - Remove @type parameter for btrfs_add_ordered_extent_compress() As the only valid @type here is BTRFS_ORDERED_COMPRESSED. - Remove the unnecessary special check for IO_DONE/COMPLETE in __btrfs_add_ordered_extent() This is just to make the code work, with extra ASSERT(), there are limited values can be passed in. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-21 09:13:54 +03:00
num_bytes, disk_num_bytes,
BTRFS_ORDERED_COMPRESSED, 0,
compress_type);
}
/*
* Add a struct btrfs_ordered_sum into the list of checksums to be inserted
* when an ordered extent is finished. If the list covers more than one
* ordered extent, it is split across multiples.
*/
void btrfs_add_ordered_sum(struct btrfs_ordered_extent *entry,
struct btrfs_ordered_sum *sum)
{
struct btrfs_ordered_inode_tree *tree;
tree = &BTRFS_I(entry->inode)->ordered_tree;
spin_lock_irq(&tree->lock);
list_add_tail(&sum->list, &entry->list);
spin_unlock_irq(&tree->lock);
}
/*
* Finish IO for one ordered extent across a given range. The range can
* contain several ordered extents.
*
* @found_ret: Return the finished ordered extent
* @file_offset: File offset for the finished IO
* Will also be updated to one byte past the range that is
* recordered as finished. This allows caller to walk forward.
* @io_size: Length of the finish IO range
* @uptodate: If the IO finished without problem
*
* Return true if any ordered extent is finished in the range, and update
* @found_ret and @file_offset.
* Return false otherwise.
*
* NOTE: Although The range can cross multiple ordered extents, only one
* ordered extent will be updated during one call. The caller is responsible to
* iterate all ordered extents in the range.
*/
bool btrfs_dec_test_first_ordered_pending(struct btrfs_inode *inode,
struct btrfs_ordered_extent **finished_ret,
u64 *file_offset, u64 io_size, int uptodate)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
struct btrfs_ordered_inode_tree *tree = &inode->ordered_tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
bool finished = false;
unsigned long flags;
u64 dec_end;
u64 dec_start;
u64 to_dec;
spin_lock_irqsave(&tree->lock, flags);
node = tree_search(tree, *file_offset);
if (!node)
goto out;
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (!offset_in_entry(entry, *file_offset))
goto out;
dec_start = max(*file_offset, entry->file_offset);
dec_end = min(*file_offset + io_size,
entry->file_offset + entry->num_bytes);
*file_offset = dec_end;
if (dec_start > dec_end) {
btrfs_crit(fs_info, "bad ordering dec_start %llu end %llu",
dec_start, dec_end);
}
to_dec = dec_end - dec_start;
if (to_dec > entry->bytes_left) {
btrfs_crit(fs_info,
"bad ordered accounting left %llu size %llu",
entry->bytes_left, to_dec);
}
entry->bytes_left -= to_dec;
if (!uptodate)
set_bit(BTRFS_ORDERED_IOERR, &entry->flags);
if (entry->bytes_left == 0) {
/*
* Ensure only one caller can set the flag and finished_ret
* accordingly
*/
finished = !test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
/* test_and_set_bit implies a barrier */
cond_wake_up_nomb(&entry->wait);
}
out:
if (finished && finished_ret && entry) {
*finished_ret = entry;
refcount_inc(&entry->refs);
}
spin_unlock_irqrestore(&tree->lock, flags);
return finished;
}
/*
* Finish IO for one ordered extent across a given range. The range can only
* contain one ordered extent.
*
* @cached: The cached ordered extent. If not NULL, we can skip the tree
* search and use the ordered extent directly.
* Will be also used to store the finished ordered extent.
* @file_offset: File offset for the finished IO
* @io_size: Length of the finish IO range
* @uptodate: If the IO finishes without problem
*
* Return true if the ordered extent is finished in the range, and update
* @cached.
* Return false otherwise.
*
* NOTE: The range can NOT cross multiple ordered extents.
* Thus caller should ensure the range doesn't cross ordered extents.
*/
bool btrfs_dec_test_ordered_pending(struct btrfs_inode *inode,
struct btrfs_ordered_extent **cached,
u64 file_offset, u64 io_size, int uptodate)
{
struct btrfs_ordered_inode_tree *tree = &inode->ordered_tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
unsigned long flags;
bool finished = false;
spin_lock_irqsave(&tree->lock, flags);
if (cached && *cached) {
entry = *cached;
goto have_entry;
}
node = tree_search(tree, file_offset);
if (!node)
goto out;
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
have_entry:
if (!offset_in_entry(entry, file_offset))
goto out;
if (io_size > entry->bytes_left)
btrfs_crit(inode->root->fs_info,
"bad ordered accounting left %llu size %llu",
entry->bytes_left, io_size);
entry->bytes_left -= io_size;
if (!uptodate)
set_bit(BTRFS_ORDERED_IOERR, &entry->flags);
if (entry->bytes_left == 0) {
/*
* Ensure only one caller can set the flag and finished_ret
* accordingly
*/
finished = !test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
/* test_and_set_bit implies a barrier */
cond_wake_up_nomb(&entry->wait);
}
out:
if (finished && cached && entry) {
*cached = entry;
refcount_inc(&entry->refs);
}
spin_unlock_irqrestore(&tree->lock, flags);
return finished;
}
/*
* used to drop a reference on an ordered extent. This will free
* the extent if the last reference is dropped
*/
void btrfs_put_ordered_extent(struct btrfs_ordered_extent *entry)
{
struct list_head *cur;
struct btrfs_ordered_sum *sum;
trace_btrfs_ordered_extent_put(BTRFS_I(entry->inode), entry);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 14:18:59 +03:00
if (refcount_dec_and_test(&entry->refs)) {
Btrfs: fix memory corruption on failure to submit bio for direct IO If we fail to submit a bio for a direct IO request, we were grabbing the corresponding ordered extent and decrementing its reference count twice, once for our lookup reference and once for the ordered tree reference. This was a problem because it caused the ordered extent to be freed without removing it from the ordered tree and any lists it might be attached to, leaving dangling pointers to the ordered extent around. Example trace with CONFIG_DEBUG_PAGEALLOC=y: [161779.858707] BUG: unable to handle kernel paging request at 0000000087654330 [161779.859983] IP: [<ffffffff8124ca68>] rb_prev+0x22/0x3b [161779.860636] PGD 34d818067 PUD 0 [161779.860636] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC (...) [161779.860636] Call Trace: [161779.860636] [<ffffffffa06b36a6>] __tree_search+0xd9/0xf9 [btrfs] [161779.860636] [<ffffffffa06b3708>] tree_search+0x42/0x63 [btrfs] [161779.860636] [<ffffffffa06b4868>] ? btrfs_lookup_ordered_range+0x2d/0xa5 [btrfs] [161779.860636] [<ffffffffa06b4873>] btrfs_lookup_ordered_range+0x38/0xa5 [btrfs] [161779.860636] [<ffffffffa06aab8e>] btrfs_get_blocks_direct+0x11b/0x615 [btrfs] [161779.860636] [<ffffffff8119727f>] do_blockdev_direct_IO+0x5ff/0xb43 [161779.860636] [<ffffffffa06aaa73>] ? btrfs_page_exists_in_range+0x1ad/0x1ad [btrfs] [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34 [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffffa06a10ae>] btrfs_direct_IO+0x198/0x21f [btrfs] [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128 [161779.860636] [<ffffffffa06affaa>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs] [161779.860636] [<ffffffffa06b004c>] btrfs_file_write_iter+0x201/0x3e0 [btrfs] (...) We were also not freeing the btrfs_dio_private we allocated previously, which kmemleak reported with the following trace in its sysfs file: unreferenced object 0xffff8803f553bf80 (size 96): comm "xfs_io", pid 4501, jiffies 4295039588 (age 173.936s) hex dump (first 32 bytes): 88 6c 9b f5 02 88 ff ff 00 00 00 00 00 00 00 00 .l.............. 00 00 00 00 00 00 00 00 00 00 c4 00 00 00 00 00 ................ backtrace: [<ffffffff81161ffe>] create_object+0x172/0x29a [<ffffffff8145870f>] kmemleak_alloc+0x25/0x41 [<ffffffff81154e64>] kmemleak_alloc_recursive.constprop.40+0x16/0x18 [<ffffffff811579ed>] kmem_cache_alloc_trace+0xfb/0x148 [<ffffffffa03d8cff>] btrfs_submit_direct+0x65/0x16a [btrfs] [<ffffffff811968dc>] dio_bio_submit+0x62/0x8f [<ffffffff811975fe>] do_blockdev_direct_IO+0x97e/0xb43 [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34 [<ffffffffa03d70ae>] btrfs_direct_IO+0x198/0x21f [btrfs] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128 [<ffffffffa03e604d>] btrfs_file_write_iter+0x201/0x3e0 [btrfs] [<ffffffff8116586a>] __vfs_write+0x7c/0xa5 [<ffffffff81165da9>] vfs_write+0xa0/0xe4 [<ffffffff81166675>] SyS_pwrite64+0x64/0x82 [<ffffffff81464fd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff For read requests we weren't doing any cleanup either (none of the work done by btrfs_endio_direct_read()), so a failure submitting a bio for a read request would leave a range in the inode's io_tree locked forever, blocking any future operations (both reads and writes) against that range. So fix this by making sure we do the same cleanup that we do for the case where the bio submission succeeds. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-07-01 14:13:10 +03:00
ASSERT(list_empty(&entry->root_extent_list));
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 14:43:58 +03:00
ASSERT(list_empty(&entry->log_list));
Btrfs: fix memory corruption on failure to submit bio for direct IO If we fail to submit a bio for a direct IO request, we were grabbing the corresponding ordered extent and decrementing its reference count twice, once for our lookup reference and once for the ordered tree reference. This was a problem because it caused the ordered extent to be freed without removing it from the ordered tree and any lists it might be attached to, leaving dangling pointers to the ordered extent around. Example trace with CONFIG_DEBUG_PAGEALLOC=y: [161779.858707] BUG: unable to handle kernel paging request at 0000000087654330 [161779.859983] IP: [<ffffffff8124ca68>] rb_prev+0x22/0x3b [161779.860636] PGD 34d818067 PUD 0 [161779.860636] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC (...) [161779.860636] Call Trace: [161779.860636] [<ffffffffa06b36a6>] __tree_search+0xd9/0xf9 [btrfs] [161779.860636] [<ffffffffa06b3708>] tree_search+0x42/0x63 [btrfs] [161779.860636] [<ffffffffa06b4868>] ? btrfs_lookup_ordered_range+0x2d/0xa5 [btrfs] [161779.860636] [<ffffffffa06b4873>] btrfs_lookup_ordered_range+0x38/0xa5 [btrfs] [161779.860636] [<ffffffffa06aab8e>] btrfs_get_blocks_direct+0x11b/0x615 [btrfs] [161779.860636] [<ffffffff8119727f>] do_blockdev_direct_IO+0x5ff/0xb43 [161779.860636] [<ffffffffa06aaa73>] ? btrfs_page_exists_in_range+0x1ad/0x1ad [btrfs] [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34 [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffffa06a10ae>] btrfs_direct_IO+0x198/0x21f [btrfs] [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128 [161779.860636] [<ffffffffa06affaa>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs] [161779.860636] [<ffffffffa06b004c>] btrfs_file_write_iter+0x201/0x3e0 [btrfs] (...) We were also not freeing the btrfs_dio_private we allocated previously, which kmemleak reported with the following trace in its sysfs file: unreferenced object 0xffff8803f553bf80 (size 96): comm "xfs_io", pid 4501, jiffies 4295039588 (age 173.936s) hex dump (first 32 bytes): 88 6c 9b f5 02 88 ff ff 00 00 00 00 00 00 00 00 .l.............. 00 00 00 00 00 00 00 00 00 00 c4 00 00 00 00 00 ................ backtrace: [<ffffffff81161ffe>] create_object+0x172/0x29a [<ffffffff8145870f>] kmemleak_alloc+0x25/0x41 [<ffffffff81154e64>] kmemleak_alloc_recursive.constprop.40+0x16/0x18 [<ffffffff811579ed>] kmem_cache_alloc_trace+0xfb/0x148 [<ffffffffa03d8cff>] btrfs_submit_direct+0x65/0x16a [btrfs] [<ffffffff811968dc>] dio_bio_submit+0x62/0x8f [<ffffffff811975fe>] do_blockdev_direct_IO+0x97e/0xb43 [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34 [<ffffffffa03d70ae>] btrfs_direct_IO+0x198/0x21f [btrfs] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128 [<ffffffffa03e604d>] btrfs_file_write_iter+0x201/0x3e0 [btrfs] [<ffffffff8116586a>] __vfs_write+0x7c/0xa5 [<ffffffff81165da9>] vfs_write+0xa0/0xe4 [<ffffffff81166675>] SyS_pwrite64+0x64/0x82 [<ffffffff81464fd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff For read requests we weren't doing any cleanup either (none of the work done by btrfs_endio_direct_read()), so a failure submitting a bio for a read request would leave a range in the inode's io_tree locked forever, blocking any future operations (both reads and writes) against that range. So fix this by making sure we do the same cleanup that we do for the case where the bio submission succeeds. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-07-01 14:13:10 +03:00
ASSERT(RB_EMPTY_NODE(&entry->rb_node));
if (entry->inode)
btrfs_add_delayed_iput(entry->inode);
while (!list_empty(&entry->list)) {
cur = entry->list.next;
sum = list_entry(cur, struct btrfs_ordered_sum, list);
list_del(&sum->list);
kvfree(sum);
}
kmem_cache_free(btrfs_ordered_extent_cache, entry);
}
}
/*
* remove an ordered extent from the tree. No references are dropped
* and waiters are woken up.
*/
void btrfs_remove_ordered_extent(struct btrfs_inode *btrfs_inode,
struct btrfs_ordered_extent *entry)
{
struct btrfs_ordered_inode_tree *tree;
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-19 21:15:55 +03:00
struct btrfs_root *root = btrfs_inode->root;
struct btrfs_fs_info *fs_info = root->fs_info;
struct rb_node *node;
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 14:43:58 +03:00
bool pending;
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-19 21:15:55 +03:00
/* This is paired with btrfs_add_ordered_extent. */
spin_lock(&btrfs_inode->lock);
btrfs_mod_outstanding_extents(btrfs_inode, -1);
spin_unlock(&btrfs_inode->lock);
if (root != fs_info->tree_root)
btrfs_delalloc_release_metadata(btrfs_inode, entry->num_bytes,
false);
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-19 21:15:55 +03:00
if (test_bit(BTRFS_ORDERED_DIRECT, &entry->flags))
percpu_counter_add_batch(&fs_info->dio_bytes, -entry->num_bytes,
fs_info->delalloc_batch);
Btrfs: rework outstanding_extents Right now we do a lot of weird hoops around outstanding_extents in order to keep the extent count consistent. This is because we logically transfer the outstanding_extent count from the initial reservation through the set_delalloc_bits. This makes it pretty difficult to get a handle on how and when we need to mess with outstanding_extents. Fix this by revamping the rules of how we deal with outstanding_extents. Now instead everybody that is holding on to a delalloc extent is required to increase the outstanding extents count for itself. This means we'll have something like this btrfs_delalloc_reserve_metadata - outstanding_extents = 1 btrfs_set_extent_delalloc - outstanding_extents = 2 btrfs_release_delalloc_extents - outstanding_extents = 1 for an initial file write. Now take the append write where we extend an existing delalloc range but still under the maximum extent size btrfs_delalloc_reserve_metadata - outstanding_extents = 2 btrfs_set_extent_delalloc btrfs_set_bit_hook - outstanding_extents = 3 btrfs_merge_extent_hook - outstanding_extents = 2 btrfs_delalloc_release_extents - outstanding_extnets = 1 In order to make the ordered extent transition we of course must now make ordered extents carry their own outstanding_extent reservation, so for cow_file_range we end up with btrfs_add_ordered_extent - outstanding_extents = 2 clear_extent_bit - outstanding_extents = 1 btrfs_remove_ordered_extent - outstanding_extents = 0 This makes all manipulations of outstanding_extents much more explicit. Every successful call to btrfs_delalloc_reserve_metadata _must_ now be combined with btrfs_release_delalloc_extents, even in the error case, as that is the only function that actually modifies the outstanding_extents counter. The drawback to this is now we are much more likely to have transient cases where outstanding_extents is much larger than it actually should be. This could happen before as we manipulated the delalloc bits, but now it happens basically at every write. This may put more pressure on the ENOSPC flushing code, but I think making this code simpler is worth the cost. I have another change coming to mitigate this side-effect somewhat. I also added trace points for the counter manipulation. These were used by a bpf script I wrote to help track down leak issues. Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2017-10-19 21:15:55 +03:00
tree = &btrfs_inode->ordered_tree;
spin_lock_irq(&tree->lock);
node = &entry->rb_node;
rb_erase(node, &tree->tree);
Btrfs: fix memory corruption on failure to submit bio for direct IO If we fail to submit a bio for a direct IO request, we were grabbing the corresponding ordered extent and decrementing its reference count twice, once for our lookup reference and once for the ordered tree reference. This was a problem because it caused the ordered extent to be freed without removing it from the ordered tree and any lists it might be attached to, leaving dangling pointers to the ordered extent around. Example trace with CONFIG_DEBUG_PAGEALLOC=y: [161779.858707] BUG: unable to handle kernel paging request at 0000000087654330 [161779.859983] IP: [<ffffffff8124ca68>] rb_prev+0x22/0x3b [161779.860636] PGD 34d818067 PUD 0 [161779.860636] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC (...) [161779.860636] Call Trace: [161779.860636] [<ffffffffa06b36a6>] __tree_search+0xd9/0xf9 [btrfs] [161779.860636] [<ffffffffa06b3708>] tree_search+0x42/0x63 [btrfs] [161779.860636] [<ffffffffa06b4868>] ? btrfs_lookup_ordered_range+0x2d/0xa5 [btrfs] [161779.860636] [<ffffffffa06b4873>] btrfs_lookup_ordered_range+0x38/0xa5 [btrfs] [161779.860636] [<ffffffffa06aab8e>] btrfs_get_blocks_direct+0x11b/0x615 [btrfs] [161779.860636] [<ffffffff8119727f>] do_blockdev_direct_IO+0x5ff/0xb43 [161779.860636] [<ffffffffa06aaa73>] ? btrfs_page_exists_in_range+0x1ad/0x1ad [btrfs] [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34 [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffffa06a10ae>] btrfs_direct_IO+0x198/0x21f [btrfs] [161779.860636] [<ffffffffa06a2c9a>] ? btrfs_get_extent_fiemap+0x1bc/0x1bc [btrfs] [161779.860636] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128 [161779.860636] [<ffffffffa06affaa>] ? btrfs_file_write_iter+0x15f/0x3e0 [btrfs] [161779.860636] [<ffffffffa06b004c>] btrfs_file_write_iter+0x201/0x3e0 [btrfs] (...) We were also not freeing the btrfs_dio_private we allocated previously, which kmemleak reported with the following trace in its sysfs file: unreferenced object 0xffff8803f553bf80 (size 96): comm "xfs_io", pid 4501, jiffies 4295039588 (age 173.936s) hex dump (first 32 bytes): 88 6c 9b f5 02 88 ff ff 00 00 00 00 00 00 00 00 .l.............. 00 00 00 00 00 00 00 00 00 00 c4 00 00 00 00 00 ................ backtrace: [<ffffffff81161ffe>] create_object+0x172/0x29a [<ffffffff8145870f>] kmemleak_alloc+0x25/0x41 [<ffffffff81154e64>] kmemleak_alloc_recursive.constprop.40+0x16/0x18 [<ffffffff811579ed>] kmem_cache_alloc_trace+0xfb/0x148 [<ffffffffa03d8cff>] btrfs_submit_direct+0x65/0x16a [btrfs] [<ffffffff811968dc>] dio_bio_submit+0x62/0x8f [<ffffffff811975fe>] do_blockdev_direct_IO+0x97e/0xb43 [<ffffffff811977f5>] __blockdev_direct_IO+0x32/0x34 [<ffffffffa03d70ae>] btrfs_direct_IO+0x198/0x21f [btrfs] [<ffffffff81112ca1>] generic_file_direct_write+0xb3/0x128 [<ffffffffa03e604d>] btrfs_file_write_iter+0x201/0x3e0 [btrfs] [<ffffffff8116586a>] __vfs_write+0x7c/0xa5 [<ffffffff81165da9>] vfs_write+0xa0/0xe4 [<ffffffff81166675>] SyS_pwrite64+0x64/0x82 [<ffffffff81464fd7>] system_call_fastpath+0x12/0x6f [<ffffffffffffffff>] 0xffffffffffffffff For read requests we weren't doing any cleanup either (none of the work done by btrfs_endio_direct_read()), so a failure submitting a bio for a read request would leave a range in the inode's io_tree locked forever, blocking any future operations (both reads and writes) against that range. So fix this by making sure we do the same cleanup that we do for the case where the bio submission succeeds. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-07-01 14:13:10 +03:00
RB_CLEAR_NODE(node);
Btrfs: avoid unnecessary ordered extent cache resets After an ordered extent completes, don't blindly reset the inode's ordered tree last accessed ordered extent pointer. While running the xfstests I noticed that about 29% of the time the ordered extent to which tree->last pointed was not the same as our just completed ordered extent. After that I ran the following sysbench test (after a prepare phase) and noticed that about 68% of the time tree->last pointed to a different ordered extent too. sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=rndwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --max-requests=0 run Therefore reset tree->last on ordered extent removal only if it pointed to the ordered extent we're removing from the tree. Results from 4 runs of the following test before and after applying this patch: $ sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --file-io-mode=sync prepare $ sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --file-io-mode=sync run Before this path: run 1 - 64.049Mb/sec run 2 - 63.455Mb/sec run 3 - 64.656Mb/sec run 4 - 63.833Mb/sec After this patch: run 1 - 66.149Mb/sec run 2 - 68.459Mb/sec run 3 - 66.338Mb/sec run 4 - 66.176Mb/sec With random writes (--file-test-mode=rndwr) I had huge fluctuations on the results (+- 35% easily). Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-11-22 22:54:58 +04:00
if (tree->last == node)
tree->last = NULL;
set_bit(BTRFS_ORDERED_COMPLETE, &entry->flags);
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 14:43:58 +03:00
pending = test_and_clear_bit(BTRFS_ORDERED_PENDING, &entry->flags);
spin_unlock_irq(&tree->lock);
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 14:43:58 +03:00
/*
* The current running transaction is waiting on us, we need to let it
* know that we're complete and wake it up.
*/
if (pending) {
struct btrfs_transaction *trans;
/*
* The checks for trans are just a formality, it should be set,
* but if it isn't we don't want to deref/assert under the spin
* lock, so be nice and check if trans is set, but ASSERT() so
* if it isn't set a developer will notice.
*/
spin_lock(&fs_info->trans_lock);
trans = fs_info->running_transaction;
if (trans)
refcount_inc(&trans->use_count);
spin_unlock(&fs_info->trans_lock);
ASSERT(trans);
if (trans) {
if (atomic_dec_and_test(&trans->pending_ordered))
wake_up(&trans->pending_wait);
btrfs_put_transaction(trans);
}
}
spin_lock(&root->ordered_extent_lock);
list_del_init(&entry->root_extent_list);
root->nr_ordered_extents--;
Btrfs: add extra flushing for renames and truncates Renames and truncates are both common ways to replace old data with new data. The filesystem can make an effort to make sure the new data is on disk before actually replacing the old data. This is especially important for rename, which many application use as though it were atomic for both the data and the metadata involved. The current btrfs code will happily replace a file that is fully on disk with one that was just created and still has pending IO. If we crash after transaction commit but before the IO is done, we'll end up replacing a good file with a zero length file. The solution used here is to create a list of inodes that need special ordering and force them to disk before the commit is done. This is similar to the ext3 style data=ordering, except it is only done on selected files. Btrfs is able to get away with this because it does not wait on commits very often, even for fsync (which use a sub-commit). For renames, we order the file when it wasn't already on disk and when it is replacing an existing file. Larger files are sent to filemap_flush right away (before the transaction handle is opened). For truncates, we order if the file goes from non-zero size down to zero size. This is a little different, because at the time of the truncate the file has no dirty bytes to order. But, we flag the inode so that it is added to the ordered list on close (via release method). We also immediately add it to the ordered list of the current transaction so that we can try to flush down any writes the application sneaks in before commit. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-31 21:27:11 +04:00
trace_btrfs_ordered_extent_remove(btrfs_inode, entry);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 14:18:59 +03:00
if (!root->nr_ordered_extents) {
spin_lock(&fs_info->ordered_root_lock);
BUG_ON(list_empty(&root->ordered_root));
list_del_init(&root->ordered_root);
spin_unlock(&fs_info->ordered_root_lock);
}
spin_unlock(&root->ordered_extent_lock);
wake_up(&entry->wait);
}
static void btrfs_run_ordered_extent_work(struct btrfs_work *work)
{
struct btrfs_ordered_extent *ordered;
ordered = container_of(work, struct btrfs_ordered_extent, flush_work);
btrfs_start_ordered_extent(ordered, 1);
complete(&ordered->completion);
}
/*
* wait for all the ordered extents in a root. This is done when balancing
* space between drives.
*/
u64 btrfs_wait_ordered_extents(struct btrfs_root *root, u64 nr,
const u64 range_start, const u64 range_len)
{
struct btrfs_fs_info *fs_info = root->fs_info;
LIST_HEAD(splice);
LIST_HEAD(skipped);
LIST_HEAD(works);
struct btrfs_ordered_extent *ordered, *next;
u64 count = 0;
const u64 range_end = range_start + range_len;
mutex_lock(&root->ordered_extent_mutex);
spin_lock(&root->ordered_extent_lock);
list_splice_init(&root->ordered_extents, &splice);
while (!list_empty(&splice) && nr) {
ordered = list_first_entry(&splice, struct btrfs_ordered_extent,
root_extent_list);
if (range_end <= ordered->disk_bytenr ||
ordered->disk_bytenr + ordered->disk_num_bytes <= range_start) {
list_move_tail(&ordered->root_extent_list, &skipped);
cond_resched_lock(&root->ordered_extent_lock);
continue;
}
list_move_tail(&ordered->root_extent_list,
&root->ordered_extents);
refcount_inc(&ordered->refs);
spin_unlock(&root->ordered_extent_lock);
btrfs_init_work(&ordered->flush_work,
btrfs_run_ordered_extent_work, NULL, NULL);
list_add_tail(&ordered->work_list, &works);
btrfs_queue_work(fs_info->flush_workers, &ordered->flush_work);
cond_resched();
spin_lock(&root->ordered_extent_lock);
if (nr != U64_MAX)
nr--;
count++;
}
list_splice_tail(&skipped, &root->ordered_extents);
list_splice_tail(&splice, &root->ordered_extents);
spin_unlock(&root->ordered_extent_lock);
list_for_each_entry_safe(ordered, next, &works, work_list) {
list_del_init(&ordered->work_list);
wait_for_completion(&ordered->completion);
btrfs_put_ordered_extent(ordered);
cond_resched();
}
mutex_unlock(&root->ordered_extent_mutex);
return count;
}
Btrfs: fix block group remaining RO forever after error during device replace When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we set the block group to RO mode and then wait for any ongoing writes into extents of the block group to complete. While doing that wait we overwrite the value of the variable 'ret' and can break out of the loop if an error happens without turning the block group back into RW mode. So what happens is the following: 1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group to RO mode (its ->ro field set to 1 or incremented to some value > 1); 2) Then btrfs_wait_ordered_roots() returns a value > 0; 3) Then if either joining or committing the transaction fails, we break out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving the block group in RO mode forever. To fix this, just remove the code that waits for ongoing writes to extents of the block group, since it's not needed because in the initial setup phase of a device replace operation, before starting to find all chunks and their extents, we set the target device for replace while holding fs_info->dev_replace->rwsem, which ensures that after releasing that semaphore, any writes into the source device are made to the target device as well (__btrfs_map_block() guarantees that). So while at scrub_enumerate_chunks() we only need to worry about finding and copying extents (from the source device to the target device) that were written before we started the device replace operation. Fixes: f0e9b7d6401959 ("Btrfs: fix race setting block group readonly during device replace") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-14 21:02:43 +03:00
void btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, u64 nr,
const u64 range_start, const u64 range_len)
{
struct btrfs_root *root;
struct list_head splice;
u64 done;
INIT_LIST_HEAD(&splice);
mutex_lock(&fs_info->ordered_operations_mutex);
spin_lock(&fs_info->ordered_root_lock);
list_splice_init(&fs_info->ordered_roots, &splice);
while (!list_empty(&splice) && nr) {
root = list_first_entry(&splice, struct btrfs_root,
ordered_root);
root = btrfs_grab_root(root);
BUG_ON(!root);
list_move_tail(&root->ordered_root,
&fs_info->ordered_roots);
spin_unlock(&fs_info->ordered_root_lock);
done = btrfs_wait_ordered_extents(root, nr,
range_start, range_len);
btrfs_put_root(root);
spin_lock(&fs_info->ordered_root_lock);
if (nr != U64_MAX) {
nr -= done;
}
}
list_splice_tail(&splice, &fs_info->ordered_roots);
spin_unlock(&fs_info->ordered_root_lock);
mutex_unlock(&fs_info->ordered_operations_mutex);
}
/*
* Used to start IO or wait for a given ordered extent to finish.
*
* If wait is one, this effectively waits on page writeback for all the pages
* in the extent, and it waits on the io completion code to insert
* metadata into the btree corresponding to the extent
*/
void btrfs_start_ordered_extent(struct btrfs_ordered_extent *entry, int wait)
{
u64 start = entry->file_offset;
u64 end = start + entry->num_bytes - 1;
struct btrfs_inode *inode = BTRFS_I(entry->inode);
trace_btrfs_ordered_extent_start(inode, entry);
Btrfs: add initial tracepoint support for btrfs Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-24 14:18:59 +03:00
/*
* pages in the range can be dirty, clean or writeback. We
* start IO on any dirty ones so the wait doesn't stall waiting
* for the flusher thread to find them
*/
if (!test_bit(BTRFS_ORDERED_DIRECT, &entry->flags))
filemap_fdatawrite_range(inode->vfs_inode.i_mapping, start, end);
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 21:49:59 +03:00
if (wait) {
wait_event(entry->wait, test_bit(BTRFS_ORDERED_COMPLETE,
&entry->flags));
Btrfs: Add zlib compression support This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-29 21:49:59 +03:00
}
}
/*
* Used to wait on ordered extents across a large range of bytes.
*/
int btrfs_wait_ordered_range(struct inode *inode, u64 start, u64 len)
{
int ret = 0;
Btrfs: fix panic when starting bg cache writeout after IO error When waiting for the writeback of block group cache we returned immediately if there was an error during writeback without waiting for the ordered extent to complete. This left a short time window where if some other task attempts to start the writeout for the same block group cache it can attempt to add a new ordered extent, starting at the same offset (0) before the previous one is removed from the ordered tree, causing an ordered tree panic (calls BUG()). This normally doesn't happen in other write paths, such as buffered writes or direct IO writes for regular files, since before marking page ranges dirty we lock the ranges and wait for any ordered extents within the range to complete first. Fix this by making btrfs_wait_ordered_range() not return immediately if it gets an error from the writeback, waiting for all ordered extents to complete first. This issue happened often when running the fstest btrfs/088 and it's easy to trigger it by running in a loop until the panic happens: for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done [17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists) [17156.864052] ------------[ cut here ]------------ [17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70! (...) [17156.864052] Call Trace: [17156.864052] [<ffffffffa03876e3>] btrfs_add_ordered_extent+0x12/0x14 [btrfs] [17156.864052] [<ffffffffa03787e2>] run_delalloc_nocow+0x5bf/0x747 [btrfs] [17156.864052] [<ffffffffa03789ff>] run_delalloc_range+0x95/0x353 [btrfs] [17156.864052] [<ffffffffa038b7fe>] writepage_delalloc.isra.16+0xb9/0x13f [btrfs] [17156.864052] [<ffffffffa038d75b>] __extent_writepage+0x129/0x1f7 [btrfs] [17156.864052] [<ffffffffa038da5a>] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs] [17156.864052] [<ffffffff810ad2af>] ? __module_text_address+0x12/0x59 [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa038df76>] extent_writepages+0x4b/0x5c [btrfs] [17156.864052] [<ffffffff81144431>] ? kmem_cache_free+0x9b/0xce [17156.864052] [<ffffffffa0376a46>] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs] [17156.864052] [<ffffffffa0389cd6>] ? free_extent_state+0x8c/0xc1 [btrfs] [17156.864052] [<ffffffffa0374871>] btrfs_writepages+0x28/0x2a [btrfs] [17156.864052] [<ffffffff8110c4c8>] do_writepages+0x23/0x2c [17156.864052] [<ffffffff81102f36>] __filemap_fdatawrite_range+0x5a/0x61 [17156.864052] [<ffffffff81102f6e>] filemap_fdatawrite_range+0x13/0x15 [17156.864052] [<ffffffffa0383ef7>] btrfs_fdatawrite_range+0x21/0x48 [btrfs] [17156.864052] [<ffffffffa03ab89e>] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs] [17156.864052] [<ffffffffa03ac1ab>] ? btrfs_write_out_cache+0x41/0xdc [btrfs] [17156.864052] [<ffffffffa03ac1fd>] btrfs_write_out_cache+0x93/0xdc [btrfs] [17156.864052] [<ffffffffa0363847>] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs] [17156.864052] [<ffffffffa03638e6>] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs] [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa037209e>] btrfs_commit_transaction+0x130/0x9c9 [btrfs] [17156.864052] [<ffffffffa034c748>] btrfs_sync_fs+0xe1/0x12d [btrfs] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-05 21:03:10 +03:00
int ret_wb = 0;
u64 end;
u64 orig_end;
struct btrfs_ordered_extent *ordered;
if (start + len < start) {
orig_end = INT_LIMIT(loff_t);
} else {
orig_end = start + len - 1;
if (orig_end > INT_LIMIT(loff_t))
orig_end = INT_LIMIT(loff_t);
}
/* start IO across the range first to instantiate any delalloc
* extents
*/
ret = btrfs_fdatawrite_range(inode, start, orig_end);
if (ret)
return ret;
Btrfs: fix panic when starting bg cache writeout after IO error When waiting for the writeback of block group cache we returned immediately if there was an error during writeback without waiting for the ordered extent to complete. This left a short time window where if some other task attempts to start the writeout for the same block group cache it can attempt to add a new ordered extent, starting at the same offset (0) before the previous one is removed from the ordered tree, causing an ordered tree panic (calls BUG()). This normally doesn't happen in other write paths, such as buffered writes or direct IO writes for regular files, since before marking page ranges dirty we lock the ranges and wait for any ordered extents within the range to complete first. Fix this by making btrfs_wait_ordered_range() not return immediately if it gets an error from the writeback, waiting for all ordered extents to complete first. This issue happened often when running the fstest btrfs/088 and it's easy to trigger it by running in a loop until the panic happens: for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done [17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists) [17156.864052] ------------[ cut here ]------------ [17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70! (...) [17156.864052] Call Trace: [17156.864052] [<ffffffffa03876e3>] btrfs_add_ordered_extent+0x12/0x14 [btrfs] [17156.864052] [<ffffffffa03787e2>] run_delalloc_nocow+0x5bf/0x747 [btrfs] [17156.864052] [<ffffffffa03789ff>] run_delalloc_range+0x95/0x353 [btrfs] [17156.864052] [<ffffffffa038b7fe>] writepage_delalloc.isra.16+0xb9/0x13f [btrfs] [17156.864052] [<ffffffffa038d75b>] __extent_writepage+0x129/0x1f7 [btrfs] [17156.864052] [<ffffffffa038da5a>] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs] [17156.864052] [<ffffffff810ad2af>] ? __module_text_address+0x12/0x59 [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa038df76>] extent_writepages+0x4b/0x5c [btrfs] [17156.864052] [<ffffffff81144431>] ? kmem_cache_free+0x9b/0xce [17156.864052] [<ffffffffa0376a46>] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs] [17156.864052] [<ffffffffa0389cd6>] ? free_extent_state+0x8c/0xc1 [btrfs] [17156.864052] [<ffffffffa0374871>] btrfs_writepages+0x28/0x2a [btrfs] [17156.864052] [<ffffffff8110c4c8>] do_writepages+0x23/0x2c [17156.864052] [<ffffffff81102f36>] __filemap_fdatawrite_range+0x5a/0x61 [17156.864052] [<ffffffff81102f6e>] filemap_fdatawrite_range+0x13/0x15 [17156.864052] [<ffffffffa0383ef7>] btrfs_fdatawrite_range+0x21/0x48 [btrfs] [17156.864052] [<ffffffffa03ab89e>] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs] [17156.864052] [<ffffffffa03ac1ab>] ? btrfs_write_out_cache+0x41/0xdc [btrfs] [17156.864052] [<ffffffffa03ac1fd>] btrfs_write_out_cache+0x93/0xdc [btrfs] [17156.864052] [<ffffffffa0363847>] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs] [17156.864052] [<ffffffffa03638e6>] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs] [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa037209e>] btrfs_commit_transaction+0x130/0x9c9 [btrfs] [17156.864052] [<ffffffffa034c748>] btrfs_sync_fs+0xe1/0x12d [btrfs] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-05 21:03:10 +03:00
/*
* If we have a writeback error don't return immediately. Wait first
* for any ordered extents that haven't completed yet. This is to make
* sure no one can dirty the same page ranges and call writepages()
* before the ordered extents complete - to avoid failures (-EEXIST)
* when adding the new ordered extents to the ordered tree.
*/
ret_wb = filemap_fdatawait_range(inode->i_mapping, start, orig_end);
end = orig_end;
while (1) {
ordered = btrfs_lookup_first_ordered_extent(BTRFS_I(inode), end);
if (!ordered)
break;
if (ordered->file_offset > orig_end) {
btrfs_put_ordered_extent(ordered);
break;
}
if (ordered->file_offset + ordered->num_bytes <= start) {
btrfs_put_ordered_extent(ordered);
break;
}
btrfs_start_ordered_extent(ordered, 1);
end = ordered->file_offset;
/*
* If the ordered extent had an error save the error but don't
* exit without waiting first for all other ordered extents in
* the range to complete.
*/
if (test_bit(BTRFS_ORDERED_IOERR, &ordered->flags))
ret = -EIO;
btrfs_put_ordered_extent(ordered);
if (end == 0 || end == start)
break;
end--;
}
Btrfs: fix panic when starting bg cache writeout after IO error When waiting for the writeback of block group cache we returned immediately if there was an error during writeback without waiting for the ordered extent to complete. This left a short time window where if some other task attempts to start the writeout for the same block group cache it can attempt to add a new ordered extent, starting at the same offset (0) before the previous one is removed from the ordered tree, causing an ordered tree panic (calls BUG()). This normally doesn't happen in other write paths, such as buffered writes or direct IO writes for regular files, since before marking page ranges dirty we lock the ranges and wait for any ordered extents within the range to complete first. Fix this by making btrfs_wait_ordered_range() not return immediately if it gets an error from the writeback, waiting for all ordered extents to complete first. This issue happened often when running the fstest btrfs/088 and it's easy to trigger it by running in a loop until the panic happens: for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done [17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists) [17156.864052] ------------[ cut here ]------------ [17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70! (...) [17156.864052] Call Trace: [17156.864052] [<ffffffffa03876e3>] btrfs_add_ordered_extent+0x12/0x14 [btrfs] [17156.864052] [<ffffffffa03787e2>] run_delalloc_nocow+0x5bf/0x747 [btrfs] [17156.864052] [<ffffffffa03789ff>] run_delalloc_range+0x95/0x353 [btrfs] [17156.864052] [<ffffffffa038b7fe>] writepage_delalloc.isra.16+0xb9/0x13f [btrfs] [17156.864052] [<ffffffffa038d75b>] __extent_writepage+0x129/0x1f7 [btrfs] [17156.864052] [<ffffffffa038da5a>] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs] [17156.864052] [<ffffffff810ad2af>] ? __module_text_address+0x12/0x59 [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa038df76>] extent_writepages+0x4b/0x5c [btrfs] [17156.864052] [<ffffffff81144431>] ? kmem_cache_free+0x9b/0xce [17156.864052] [<ffffffffa0376a46>] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs] [17156.864052] [<ffffffffa0389cd6>] ? free_extent_state+0x8c/0xc1 [btrfs] [17156.864052] [<ffffffffa0374871>] btrfs_writepages+0x28/0x2a [btrfs] [17156.864052] [<ffffffff8110c4c8>] do_writepages+0x23/0x2c [17156.864052] [<ffffffff81102f36>] __filemap_fdatawrite_range+0x5a/0x61 [17156.864052] [<ffffffff81102f6e>] filemap_fdatawrite_range+0x13/0x15 [17156.864052] [<ffffffffa0383ef7>] btrfs_fdatawrite_range+0x21/0x48 [btrfs] [17156.864052] [<ffffffffa03ab89e>] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs] [17156.864052] [<ffffffffa03ac1ab>] ? btrfs_write_out_cache+0x41/0xdc [btrfs] [17156.864052] [<ffffffffa03ac1fd>] btrfs_write_out_cache+0x93/0xdc [btrfs] [17156.864052] [<ffffffffa0363847>] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs] [17156.864052] [<ffffffffa03638e6>] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs] [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa037209e>] btrfs_commit_transaction+0x130/0x9c9 [btrfs] [17156.864052] [<ffffffffa034c748>] btrfs_sync_fs+0xe1/0x12d [btrfs] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-05 21:03:10 +03:00
return ret_wb ? ret_wb : ret;
}
/*
* find an ordered extent corresponding to file_offset. return NULL if
* nothing is found, otherwise take a reference on the extent and return it
*/
struct btrfs_ordered_extent *btrfs_lookup_ordered_extent(struct btrfs_inode *inode,
u64 file_offset)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
tree = &inode->ordered_tree;
spin_lock_irq(&tree->lock);
node = tree_search(tree, file_offset);
if (!node)
goto out;
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (!offset_in_entry(entry, file_offset))
entry = NULL;
if (entry)
refcount_inc(&entry->refs);
out:
spin_unlock_irq(&tree->lock);
return entry;
}
/* Since the DIO code tries to lock a wide area we need to look for any ordered
* extents that exist in the range, rather than just the start of the range.
*/
struct btrfs_ordered_extent *btrfs_lookup_ordered_range(
struct btrfs_inode *inode, u64 file_offset, u64 len)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
tree = &inode->ordered_tree;
spin_lock_irq(&tree->lock);
node = tree_search(tree, file_offset);
if (!node) {
node = tree_search(tree, file_offset + len);
if (!node)
goto out;
}
while (1) {
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
if (range_overlaps(entry, file_offset, len))
break;
if (entry->file_offset >= file_offset + len) {
entry = NULL;
break;
}
entry = NULL;
node = rb_next(node);
if (!node)
break;
}
out:
if (entry)
refcount_inc(&entry->refs);
spin_unlock_irq(&tree->lock);
return entry;
}
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 14:43:58 +03:00
/*
* Adds all ordered extents to the given list. The list ends up sorted by the
* file_offset of the ordered extents.
*/
void btrfs_get_ordered_extents_for_logging(struct btrfs_inode *inode,
struct list_head *list)
{
struct btrfs_ordered_inode_tree *tree = &inode->ordered_tree;
struct rb_node *n;
ASSERT(inode_is_locked(&inode->vfs_inode));
spin_lock_irq(&tree->lock);
for (n = rb_first(&tree->tree); n; n = rb_next(n)) {
struct btrfs_ordered_extent *ordered;
ordered = rb_entry(n, struct btrfs_ordered_extent, rb_node);
if (test_bit(BTRFS_ORDERED_LOGGED, &ordered->flags))
continue;
ASSERT(list_empty(&ordered->log_list));
list_add_tail(&ordered->log_list, list);
refcount_inc(&ordered->refs);
}
spin_unlock_irq(&tree->lock);
}
/*
* lookup and return any extent before 'file_offset'. NULL is returned
* if none is found
*/
struct btrfs_ordered_extent *
btrfs_lookup_first_ordered_extent(struct btrfs_inode *inode, u64 file_offset)
{
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry = NULL;
tree = &inode->ordered_tree;
spin_lock_irq(&tree->lock);
node = tree_search(tree, file_offset);
if (!node)
goto out;
entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
refcount_inc(&entry->refs);
out:
spin_unlock_irq(&tree->lock);
return entry;
}
/*
* btrfs_flush_ordered_range - Lock the passed range and ensures all pending
* ordered extents in it are run to completion.
*
* @inode: Inode whose ordered tree is to be searched
* @start: Beginning of range to flush
* @end: Last byte of range to lock
* @cached_state: If passed, will return the extent state responsible for the
* locked range. It's the caller's responsibility to free the cached state.
*
* This function always returns with the given range locked, ensuring after it's
* called no order extent can be pending.
*/
void btrfs_lock_and_flush_ordered_range(struct btrfs_inode *inode, u64 start,
u64 end,
struct extent_state **cached_state)
{
struct btrfs_ordered_extent *ordered;
struct extent_state *cache = NULL;
struct extent_state **cachedp = &cache;
if (cached_state)
cachedp = cached_state;
while (1) {
lock_extent_bits(&inode->io_tree, start, end, cachedp);
ordered = btrfs_lookup_ordered_range(inode, start,
end - start + 1);
if (!ordered) {
/*
* If no external cached_state has been passed then
* decrement the extra ref taken for cachedp since we
* aren't exposing it outside of this function
*/
if (!cached_state)
refcount_dec(&cache->refs);
break;
}
unlock_extent_cached(&inode->io_tree, start, end, cachedp);
btrfs_start_ordered_extent(ordered, 1);
btrfs_put_ordered_extent(ordered);
}
}
int __init ordered_data_init(void)
{
btrfs_ordered_extent_cache = kmem_cache_create("btrfs_ordered_extent",
sizeof(struct btrfs_ordered_extent), 0,
SLAB_MEM_SPREAD,
NULL);
if (!btrfs_ordered_extent_cache)
return -ENOMEM;
return 0;
}
void __cold ordered_data_exit(void)
{
kmem_cache_destroy(btrfs_ordered_extent_cache);
}