WSL2-Linux-Kernel/drivers/net/wireless/ath/wil6210/txrx.h

693 строки
20 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: ISC */
/*
* Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
*/
#ifndef WIL6210_TXRX_H
#define WIL6210_TXRX_H
#include "wil6210.h"
#include "txrx_edma.h"
#define BUF_SW_OWNED (1)
#define BUF_HW_OWNED (0)
/* default size of MAC Tx/Rx buffers */
#define TXRX_BUF_LEN_DEFAULT (2048)
/* how many bytes to reserve for rtap header? */
#define WIL6210_RTAP_SIZE (128)
/* Tx/Rx path */
static inline dma_addr_t wil_desc_addr(struct wil_ring_dma_addr *addr)
{
return le32_to_cpu(addr->addr_low) |
((u64)le16_to_cpu(addr->addr_high) << 32);
}
static inline void wil_desc_addr_set(struct wil_ring_dma_addr *addr,
dma_addr_t pa)
{
addr->addr_low = cpu_to_le32(lower_32_bits(pa));
addr->addr_high = cpu_to_le16((u16)upper_32_bits(pa));
}
/* Tx descriptor - MAC part
* [dword 0]
* bit 0.. 9 : lifetime_expiry_value:10
* bit 10 : interrupt_en:1
* bit 11 : status_en:1
* bit 12..13 : txss_override:2
* bit 14 : timestamp_insertion:1
* bit 15 : duration_preserve:1
* bit 16..21 : reserved0:6
* bit 22..26 : mcs_index:5
* bit 27 : mcs_en:1
* bit 28..30 : reserved1:3
* bit 31 : sn_preserved:1
* [dword 1]
* bit 0.. 3 : pkt_mode:4
* bit 4 : pkt_mode_en:1
* bit 5 : mac_id_en:1
* bit 6..7 : mac_id:2
* bit 8..14 : reserved0:7
* bit 15 : ack_policy_en:1
* bit 16..19 : dst_index:4
* bit 20 : dst_index_en:1
* bit 21..22 : ack_policy:2
* bit 23 : lifetime_en:1
* bit 24..30 : max_retry:7
* bit 31 : max_retry_en:1
* [dword 2]
* bit 0.. 7 : num_of_descriptors:8
* bit 8..17 : reserved:10
* bit 18..19 : l2_translation_type:2 00 - bypass, 01 - 802.3, 10 - 802.11
* bit 20 : snap_hdr_insertion_en:1
* bit 21 : vlan_removal_en:1
* bit 22..31 : reserved0:10
* [dword 3]
* bit 0.. 31: ucode_cmd:32
*/
struct vring_tx_mac {
u32 d[3];
u32 ucode_cmd;
} __packed;
/* TX MAC Dword 0 */
#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_POS 0
#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_LEN 10
#define MAC_CFG_DESC_TX_0_LIFETIME_EXPIRY_VALUE_MSK 0x3FF
#define MAC_CFG_DESC_TX_0_INTERRUP_EN_POS 10
#define MAC_CFG_DESC_TX_0_INTERRUP_EN_LEN 1
#define MAC_CFG_DESC_TX_0_INTERRUP_EN_MSK 0x400
#define MAC_CFG_DESC_TX_0_STATUS_EN_POS 11
#define MAC_CFG_DESC_TX_0_STATUS_EN_LEN 1
#define MAC_CFG_DESC_TX_0_STATUS_EN_MSK 0x800
#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_POS 12
#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_LEN 2
#define MAC_CFG_DESC_TX_0_TXSS_OVERRIDE_MSK 0x3000
#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_POS 14
#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_LEN 1
#define MAC_CFG_DESC_TX_0_TIMESTAMP_INSERTION_MSK 0x4000
#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_POS 15
#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_LEN 1
#define MAC_CFG_DESC_TX_0_DURATION_PRESERVE_MSK 0x8000
#define MAC_CFG_DESC_TX_0_MCS_INDEX_POS 22
#define MAC_CFG_DESC_TX_0_MCS_INDEX_LEN 5
#define MAC_CFG_DESC_TX_0_MCS_INDEX_MSK 0x7C00000
#define MAC_CFG_DESC_TX_0_MCS_EN_POS 27
#define MAC_CFG_DESC_TX_0_MCS_EN_LEN 1
#define MAC_CFG_DESC_TX_0_MCS_EN_MSK 0x8000000
#define MAC_CFG_DESC_TX_0_SN_PRESERVED_POS 31
#define MAC_CFG_DESC_TX_0_SN_PRESERVED_LEN 1
#define MAC_CFG_DESC_TX_0_SN_PRESERVED_MSK 0x80000000
/* TX MAC Dword 1 */
#define MAC_CFG_DESC_TX_1_PKT_MODE_POS 0
#define MAC_CFG_DESC_TX_1_PKT_MODE_LEN 4
#define MAC_CFG_DESC_TX_1_PKT_MODE_MSK 0xF
#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_POS 4
#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_LEN 1
#define MAC_CFG_DESC_TX_1_PKT_MODE_EN_MSK 0x10
#define MAC_CFG_DESC_TX_1_MAC_ID_EN_POS 5
#define MAC_CFG_DESC_TX_1_MAC_ID_EN_LEN 1
#define MAC_CFG_DESC_TX_1_MAC_ID_EN_MSK 0x20
#define MAC_CFG_DESC_TX_1_MAC_ID_POS 6
#define MAC_CFG_DESC_TX_1_MAC_ID_LEN 2
#define MAC_CFG_DESC_TX_1_MAC_ID_MSK 0xc0
#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_POS 15
#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_LEN 1
#define MAC_CFG_DESC_TX_1_ACK_POLICY_EN_MSK 0x8000
#define MAC_CFG_DESC_TX_1_DST_INDEX_POS 16
#define MAC_CFG_DESC_TX_1_DST_INDEX_LEN 4
#define MAC_CFG_DESC_TX_1_DST_INDEX_MSK 0xF0000
#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS 20
#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_LEN 1
#define MAC_CFG_DESC_TX_1_DST_INDEX_EN_MSK 0x100000
#define MAC_CFG_DESC_TX_1_ACK_POLICY_POS 21
#define MAC_CFG_DESC_TX_1_ACK_POLICY_LEN 2
#define MAC_CFG_DESC_TX_1_ACK_POLICY_MSK 0x600000
#define MAC_CFG_DESC_TX_1_LIFETIME_EN_POS 23
#define MAC_CFG_DESC_TX_1_LIFETIME_EN_LEN 1
#define MAC_CFG_DESC_TX_1_LIFETIME_EN_MSK 0x800000
#define MAC_CFG_DESC_TX_1_MAX_RETRY_POS 24
#define MAC_CFG_DESC_TX_1_MAX_RETRY_LEN 7
#define MAC_CFG_DESC_TX_1_MAX_RETRY_MSK 0x7F000000
#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_POS 31
#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_LEN 1
#define MAC_CFG_DESC_TX_1_MAX_RETRY_EN_MSK 0x80000000
/* TX MAC Dword 2 */
#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_POS 0
#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_LEN 8
#define MAC_CFG_DESC_TX_2_NUM_OF_DESCRIPTORS_MSK 0xFF
#define MAC_CFG_DESC_TX_2_RESERVED_POS 8
#define MAC_CFG_DESC_TX_2_RESERVED_LEN 10
#define MAC_CFG_DESC_TX_2_RESERVED_MSK 0x3FF00
#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS 18
#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_LEN 2
#define MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_MSK 0xC0000
#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS 20
#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_LEN 1
#define MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_MSK 0x100000
#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_POS 21
#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_LEN 1
#define MAC_CFG_DESC_TX_2_VLAN_REMOVAL_EN_MSK 0x200000
/* TX MAC Dword 3 */
#define MAC_CFG_DESC_TX_3_UCODE_CMD_POS 0
#define MAC_CFG_DESC_TX_3_UCODE_CMD_LEN 32
#define MAC_CFG_DESC_TX_3_UCODE_CMD_MSK 0xFFFFFFFF
/* TX DMA Dword 0 */
#define DMA_CFG_DESC_TX_0_L4_LENGTH_POS 0
#define DMA_CFG_DESC_TX_0_L4_LENGTH_LEN 8
#define DMA_CFG_DESC_TX_0_L4_LENGTH_MSK 0xFF
#define DMA_CFG_DESC_TX_0_CMD_EOP_POS 8
#define DMA_CFG_DESC_TX_0_CMD_EOP_LEN 1
#define DMA_CFG_DESC_TX_0_CMD_EOP_MSK 0x100
#define DMA_CFG_DESC_TX_0_CMD_MARK_WB_POS 9
#define DMA_CFG_DESC_TX_0_CMD_MARK_WB_LEN 1
#define DMA_CFG_DESC_TX_0_CMD_MARK_WB_MSK 0x200
#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS 10
#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_LEN 1
#define DMA_CFG_DESC_TX_0_CMD_DMA_IT_MSK 0x400
#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_POS 11
#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_LEN 2
#define DMA_CFG_DESC_TX_0_SEGMENT_BUF_DETAILS_MSK 0x1800
#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_POS 13
#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_LEN 1
#define DMA_CFG_DESC_TX_0_TCP_SEG_EN_MSK 0x2000
#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_POS 14
#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_LEN 1
#define DMA_CFG_DESC_TX_0_IPV4_CHECKSUM_EN_MSK 0x4000
#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_POS 15
#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_LEN 1
#define DMA_CFG_DESC_TX_0_TCP_UDP_CHECKSUM_EN_MSK 0x8000
#define DMA_CFG_DESC_TX_0_QID_POS 16
#define DMA_CFG_DESC_TX_0_QID_LEN 5
#define DMA_CFG_DESC_TX_0_QID_MSK 0x1F0000
#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_POS 21
#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_LEN 1
#define DMA_CFG_DESC_TX_0_PSEUDO_HEADER_CALC_EN_MSK 0x200000
#define DMA_CFG_DESC_TX_0_L4_TYPE_POS 30
#define DMA_CFG_DESC_TX_0_L4_TYPE_LEN 2
#define DMA_CFG_DESC_TX_0_L4_TYPE_MSK 0xC0000000 /* L4 type: 0-UDP, 2-TCP */
#define DMA_CFG_DESC_TX_OFFLOAD_CFG_MAC_LEN_POS 0
#define DMA_CFG_DESC_TX_OFFLOAD_CFG_MAC_LEN_LEN 7
#define DMA_CFG_DESC_TX_OFFLOAD_CFG_MAC_LEN_MSK 0x7F /* MAC hdr len */
#define DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_POS 7
#define DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_LEN 1
#define DMA_CFG_DESC_TX_OFFLOAD_CFG_L3T_IPV4_MSK 0x80 /* 1-IPv4, 0-IPv6 */
#define TX_DMA_STATUS_DU BIT(0)
/* Tx descriptor - DMA part
* [dword 0]
* bit 0.. 7 : l4_length:8 layer 4 length
* bit 8 : cmd_eop:1 This descriptor is the last one in the packet
* bit 9 : reserved
* bit 10 : cmd_dma_it:1 immediate interrupt
* bit 11..12 : SBD - Segment Buffer Details
* 00 - Header Segment
* 01 - First Data Segment
* 10 - Medium Data Segment
* 11 - Last Data Segment
* bit 13 : TSE - TCP Segmentation Enable
* bit 14 : IIC - Directs the HW to Insert IPv4 Checksum
* bit 15 : ITC - Directs the HW to Insert TCP/UDP Checksum
* bit 16..20 : QID - The target QID that the packet should be stored
* in the MAC.
* bit 21 : PO - Pseudo header Offload:
* 0 - Use the pseudo header value from the TCP checksum field
* 1- Calculate Pseudo header Checksum
* bit 22 : NC - No UDP Checksum
* bit 23..29 : reserved
* bit 30..31 : L4T - Layer 4 Type: 00 - UDP , 10 - TCP , 10, 11 - Reserved
* If L4Len equal 0, no L4 at all
* [dword 1]
* bit 0..31 : addr_low:32 The payload buffer low address
* [dword 2]
* bit 0..15 : addr_high:16 The payload buffer high address
* bit 16..23 : ip_length:8 The IP header length for the TX IP checksum
* offload feature
* bit 24..30 : mac_length:7
* bit 31 : ip_version:1 1 - IPv4, 0 - IPv6
* [dword 3]
* [byte 12] error
* bit 0 2 : mac_status:3
* bit 3 7 : reserved:5
* [byte 13] status
* bit 0 : DU:1 Descriptor Used
* bit 1 7 : reserved:7
* [word 7] length
*/
struct vring_tx_dma {
u32 d0;
struct wil_ring_dma_addr addr;
u8 ip_length;
u8 b11; /* 0..6: mac_length; 7:ip_version */
u8 error; /* 0..2: err; 3..7: reserved; */
u8 status; /* 0: used; 1..7; reserved */
__le16 length;
} __packed;
/* TSO type used in dma descriptor d0 bits 11-12 */
enum {
wil_tso_type_hdr = 0,
wil_tso_type_first = 1,
wil_tso_type_mid = 2,
wil_tso_type_lst = 3,
};
/* Rx descriptor - MAC part
* [dword 0]
* bit 0.. 3 : tid:4 The QoS (b3-0) TID Field
* bit 4.. 6 : cid:3 The Source index that was found during parsing the TA.
* This field is used to define the source of the packet
* bit 7 : MAC_id_valid:1, 1 if MAC virtual number is valid.
* bit 8.. 9 : mid:2 The MAC virtual number
* bit 10..11 : frame_type:2 : The FC (b3-2) - MPDU Type
* (management, data, control and extension)
* bit 12..15 : frame_subtype:4 : The FC (b7-4) - Frame Subtype
* bit 16..27 : seq_number:12 The received Sequence number field
* bit 28..31 : extended:4 extended subtype
* [dword 1]
* bit 0.. 3 : reserved
* bit 4.. 5 : key_id:2
* bit 6 : decrypt_bypass:1
* bit 7 : security:1 FC (b14)
* bit 8.. 9 : ds_bits:2 FC (b9-8)
* bit 10 : a_msdu_present:1 QoS (b7)
* bit 11 : a_msdu_type:1 QoS (b8)
* bit 12 : a_mpdu:1 part of AMPDU aggregation
* bit 13 : broadcast:1
* bit 14 : mutlicast:1
* bit 15 : reserved:1
* bit 16..20 : rx_mac_qid:5 The Queue Identifier that the packet
* is received from
* bit 21..24 : mcs:4
* bit 25..28 : mic_icr:4 this signal tells the DMA to assert an interrupt
* after it writes the packet
* bit 29..31 : reserved:3
* [dword 2]
* bit 0.. 2 : time_slot:3 The timeslot that the MPDU is received
* bit 3.. 4 : fc_protocol_ver:1 The FC (b1-0) - Protocol Version
* bit 5 : fc_order:1 The FC Control (b15) -Order
* bit 6.. 7 : qos_ack_policy:2 The QoS (b6-5) ack policy Field
* bit 8 : esop:1 The QoS (b4) ESOP field
* bit 9 : qos_rdg_more_ppdu:1 The QoS (b9) RDG field
* bit 10..14 : qos_reserved:5 The QoS (b14-10) Reserved field
* bit 15 : qos_ac_constraint:1 QoS (b15)
* bit 16..31 : pn_15_0:16 low 2 bytes of PN
* [dword 3]
* bit 0..31 : pn_47_16:32 high 4 bytes of PN
*/
struct vring_rx_mac {
u32 d0;
u32 d1;
u16 w4;
u16 pn_15_0;
u32 pn_47_16;
} __packed;
/* Rx descriptor - DMA part
* [dword 0]
* bit 0.. 7 : l4_length:8 layer 4 length. The field is only valid if
* L4I bit is set
* bit 8 : cmd_eop:1 set to 1
* bit 9 : cmd_rt:1 set to 1
* bit 10 : cmd_dma_it:1 immediate interrupt
* bit 11..15 : reserved:5
* bit 16..29 : phy_info_length:14 It is valid when the PII is set.
* When the FFM bit is set bits 29-27 are used for for
* Flex Filter Match. Matching Index to one of the L2
* EtherType Flex Filter
* bit 30..31 : l4_type:2 valid if the L4I bit is set in the status field
* 00 - UDP, 01 - TCP, 10, 11 - reserved
* [dword 1]
* bit 0..31 : addr_low:32 The payload buffer low address
* [dword 2]
* bit 0..15 : addr_high:16 The payload buffer high address
* bit 16..23 : ip_length:8 The filed is valid only if the L3I bit is set
* bit 24..30 : mac_length:7
* bit 31 : ip_version:1 1 - IPv4, 0 - IPv6
* [dword 3]
* [byte 12] error
* bit 0 : FCS:1
* bit 1 : MIC:1
* bit 2 : Key miss:1
* bit 3 : Replay:1
* bit 4 : L3:1 IPv4 checksum
* bit 5 : L4:1 TCP/UDP checksum
* bit 6 7 : reserved:2
* [byte 13] status
* bit 0 : DU:1 Descriptor Used
* bit 1 : EOP:1 The descriptor indicates the End of Packet
* bit 2 : error:1
* bit 3 : MI:1 MAC Interrupt is asserted (according to parser decision)
* bit 4 : L3I:1 L3 identified and checksum calculated
* bit 5 : L4I:1 L4 identified and checksum calculated
* bit 6 : PII:1 PHY Info Included in the packet
* bit 7 : FFM:1 EtherType Flex Filter Match
* [word 7] length
*/
#define RX_DMA_D0_CMD_DMA_EOP BIT(8)
#define RX_DMA_D0_CMD_DMA_RT BIT(9) /* always 1 */
#define RX_DMA_D0_CMD_DMA_IT BIT(10) /* interrupt */
#define RX_MAC_D0_MAC_ID_VALID BIT(7)
/* Error field */
#define RX_DMA_ERROR_FCS BIT(0)
#define RX_DMA_ERROR_MIC BIT(1)
#define RX_DMA_ERROR_KEY BIT(2) /* Key missing */
#define RX_DMA_ERROR_REPLAY BIT(3)
#define RX_DMA_ERROR_L3_ERR BIT(4)
#define RX_DMA_ERROR_L4_ERR BIT(5)
/* Status field */
#define RX_DMA_STATUS_DU BIT(0)
#define RX_DMA_STATUS_EOP BIT(1)
#define RX_DMA_STATUS_ERROR BIT(2)
#define RX_DMA_STATUS_MI BIT(3) /* MAC Interrupt is asserted */
#define RX_DMA_STATUS_L3I BIT(4)
#define RX_DMA_STATUS_L4I BIT(5)
#define RX_DMA_STATUS_PHY_INFO BIT(6)
#define RX_DMA_STATUS_FFM BIT(7) /* EtherType Flex Filter Match */
/* IEEE 802.11, 8.5.2 EAPOL-Key frames */
#define WIL_KEY_INFO_KEY_TYPE BIT(3) /* val of 1 = Pairwise, 0 = Group key */
#define WIL_KEY_INFO_MIC BIT(8)
#define WIL_KEY_INFO_ENCR_KEY_DATA BIT(12) /* for rsn only */
#define WIL_EAP_NONCE_LEN 32
#define WIL_EAP_KEY_RSC_LEN 8
#define WIL_EAP_REPLAY_COUNTER_LEN 8
#define WIL_EAP_KEY_IV_LEN 16
#define WIL_EAP_KEY_ID_LEN 8
enum {
WIL_1X_TYPE_EAP_PACKET = 0,
WIL_1X_TYPE_EAPOL_START = 1,
WIL_1X_TYPE_EAPOL_LOGOFF = 2,
WIL_1X_TYPE_EAPOL_KEY = 3,
};
#define WIL_EAPOL_KEY_TYPE_RSN 2
#define WIL_EAPOL_KEY_TYPE_WPA 254
struct wil_1x_hdr {
u8 version;
u8 type;
__be16 length;
/* followed by data */
} __packed;
struct wil_eapol_key {
u8 type;
__be16 key_info;
__be16 key_length;
u8 replay_counter[WIL_EAP_REPLAY_COUNTER_LEN];
u8 key_nonce[WIL_EAP_NONCE_LEN];
u8 key_iv[WIL_EAP_KEY_IV_LEN];
u8 key_rsc[WIL_EAP_KEY_RSC_LEN];
u8 key_id[WIL_EAP_KEY_ID_LEN];
} __packed;
struct vring_rx_dma {
u32 d0;
struct wil_ring_dma_addr addr;
u8 ip_length;
u8 b11;
u8 error;
u8 status;
__le16 length;
} __packed;
struct vring_tx_desc {
struct vring_tx_mac mac;
struct vring_tx_dma dma;
} __packed;
union wil_tx_desc {
struct vring_tx_desc legacy;
struct wil_tx_enhanced_desc enhanced;
} __packed;
struct vring_rx_desc {
struct vring_rx_mac mac;
struct vring_rx_dma dma;
} __packed;
union wil_rx_desc {
struct vring_rx_desc legacy;
struct wil_rx_enhanced_desc enhanced;
} __packed;
union wil_ring_desc {
union wil_tx_desc tx;
union wil_rx_desc rx;
} __packed;
struct packet_rx_info {
u8 cid;
};
/* this struct will be stored in the skb cb buffer
* max length of the struct is limited to 48 bytes
*/
struct skb_rx_info {
struct vring_rx_desc rx_desc;
struct packet_rx_info rx_info;
};
static inline int wil_rxdesc_tid(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 0, 3);
}
static inline int wil_rxdesc_cid(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 4, 6);
}
static inline int wil_rxdesc_mid(struct vring_rx_desc *d)
{
return (d->mac.d0 & RX_MAC_D0_MAC_ID_VALID) ?
WIL_GET_BITS(d->mac.d0, 8, 9) : 0;
}
static inline int wil_rxdesc_ftype(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 10, 11);
}
static inline int wil_rxdesc_subtype(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 12, 15);
}
/* 1-st byte (with frame type/subtype) of FC field */
static inline u8 wil_rxdesc_fc1(struct vring_rx_desc *d)
{
return (u8)(WIL_GET_BITS(d->mac.d0, 10, 15) << 2);
}
static inline int wil_rxdesc_seq(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 16, 27);
}
static inline int wil_rxdesc_ext_subtype(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 28, 31);
}
static inline int wil_rxdesc_retry(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d0, 31, 31);
}
static inline int wil_rxdesc_key_id(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d1, 4, 5);
}
static inline int wil_rxdesc_security(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d1, 7, 7);
}
static inline int wil_rxdesc_ds_bits(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d1, 8, 9);
}
static inline int wil_rxdesc_mcs(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d1, 21, 24);
}
static inline int wil_rxdesc_mcast(struct vring_rx_desc *d)
{
return WIL_GET_BITS(d->mac.d1, 13, 14);
}
static inline struct vring_rx_desc *wil_skb_rxdesc(struct sk_buff *skb)
{
return (void *)skb->cb;
}
static inline int wil_ring_is_empty(struct wil_ring *ring)
{
return ring->swhead == ring->swtail;
}
static inline u32 wil_ring_next_tail(struct wil_ring *ring)
{
return (ring->swtail + 1) % ring->size;
}
static inline void wil_ring_advance_head(struct wil_ring *ring, int n)
{
ring->swhead = (ring->swhead + n) % ring->size;
}
static inline int wil_ring_is_full(struct wil_ring *ring)
{
return wil_ring_next_tail(ring) == ring->swhead;
}
static inline u8 *wil_skb_get_da(struct sk_buff *skb)
{
struct ethhdr *eth = (void *)skb->data;
return eth->h_dest;
}
static inline u8 *wil_skb_get_sa(struct sk_buff *skb)
{
struct ethhdr *eth = (void *)skb->data;
return eth->h_source;
}
static inline bool wil_need_txstat(struct sk_buff *skb)
{
const u8 *da = wil_skb_get_da(skb);
return is_unicast_ether_addr(da) && skb->sk &&
(skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS);
}
static inline void wil_consume_skb(struct sk_buff *skb, bool acked)
{
if (unlikely(wil_need_txstat(skb)))
skb_complete_wifi_ack(skb, acked);
else
acked ? dev_consume_skb_any(skb) : dev_kfree_skb_any(skb);
}
/* Used space in Tx ring */
static inline int wil_ring_used_tx(struct wil_ring *ring)
{
u32 swhead = ring->swhead;
u32 swtail = ring->swtail;
return (ring->size + swhead - swtail) % ring->size;
}
/* Available space in Tx ring */
static inline int wil_ring_avail_tx(struct wil_ring *ring)
{
return ring->size - wil_ring_used_tx(ring) - 1;
}
wil6210: initialize TX and RX enhanced DMA rings Enhanced DMA design includes the following rings: - Single RX descriptor ring is used for all VIFs - Multiple RX status rings are supported, to allow RSS - TX descriptor ring is allocated per connection - A single TX status ring is used for all TX descriptor rings This patch initializes and frees the above descriptor and status rings. The RX SKBs are handled by a new entity of RX buffers manager, which handles RX buffers, each one points to an allocated SKB. During Rx completion processing, the driver extracts a buffer ID which is used as an index to the buffers array. After the SKB is freed the buffer is moved from the 'active' list to the 'free' list, indicating it can be used for another descriptor. During Rx refill, SKBs are allocated and attached to 'free' buffers. Those buffers are attached to new descriptors and moved to the 'active' list. New debugfs entries were added to allow edma configuration: Run the following command to configure the number of status rings: echo NUM_OF_STATUS_RINGS > num_rx_status_rings Run the following command to use extended RX status message for additional debug fields from HW: echo 0 > compressed_rx_status Run the following command to control the size of the TX status ring: echo TX_STATUS_RING_ORDER > tx_status_ring_order The status ring size will be 1 << tx_status_ring_order Run the following command to control the size of the RX status ring: echo RX_STATUS_RING_ORDER > rx_status_ring_order Due to HW constrains RX sring order should be bigger than RX ring order The status ring size will be 1 << rx_status_ring_order Run the following command to change the number of RX buffer IDs: echo RX_BUFF_ID_COUNT > rx_buff_id_count Signed-off-by: Gidon Studinski <gidons@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-29 16:28:23 +03:00
static inline int wil_get_min_tx_ring_id(struct wil6210_priv *wil)
{
/* In Enhanced DMA ring 0 is reserved for RX */
return wil->use_enhanced_dma_hw ? 1 : 0;
}
/* similar to ieee80211_ version, but FC contain only 1-st byte */
static inline int wil_is_back_req(u8 fc)
{
return (fc & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_BACK_REQ);
}
/* wil_val_in_range - check if value in [min,max) */
static inline bool wil_val_in_range(int val, int min, int max)
{
return val >= min && val < max;
}
static inline u8 wil_skb_get_cid(struct sk_buff *skb)
{
struct skb_rx_info *skb_rx_info = (void *)skb->cb;
return skb_rx_info->rx_info.cid;
}
static inline void wil_skb_set_cid(struct sk_buff *skb, u8 cid)
{
struct skb_rx_info *skb_rx_info = (void *)skb->cb;
skb_rx_info->rx_info.cid = cid;
}
void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev);
void wil_netif_rx(struct sk_buff *skb, struct net_device *ndev, int cid,
struct wil_net_stats *stats, bool gro);
void wil_rx_reorder(struct wil6210_priv *wil, struct sk_buff *skb);
void wil_rx_bar(struct wil6210_priv *wil, struct wil6210_vif *vif,
u8 cid, u8 tid, u16 seq);
struct wil_tid_ampdu_rx *wil_tid_ampdu_rx_alloc(struct wil6210_priv *wil,
int size, u16 ssn);
void wil_tid_ampdu_rx_free(struct wil6210_priv *wil,
struct wil_tid_ampdu_rx *r);
wil6210: initialize TX and RX enhanced DMA rings Enhanced DMA design includes the following rings: - Single RX descriptor ring is used for all VIFs - Multiple RX status rings are supported, to allow RSS - TX descriptor ring is allocated per connection - A single TX status ring is used for all TX descriptor rings This patch initializes and frees the above descriptor and status rings. The RX SKBs are handled by a new entity of RX buffers manager, which handles RX buffers, each one points to an allocated SKB. During Rx completion processing, the driver extracts a buffer ID which is used as an index to the buffers array. After the SKB is freed the buffer is moved from the 'active' list to the 'free' list, indicating it can be used for another descriptor. During Rx refill, SKBs are allocated and attached to 'free' buffers. Those buffers are attached to new descriptors and moved to the 'active' list. New debugfs entries were added to allow edma configuration: Run the following command to configure the number of status rings: echo NUM_OF_STATUS_RINGS > num_rx_status_rings Run the following command to use extended RX status message for additional debug fields from HW: echo 0 > compressed_rx_status Run the following command to control the size of the TX status ring: echo TX_STATUS_RING_ORDER > tx_status_ring_order The status ring size will be 1 << tx_status_ring_order Run the following command to control the size of the RX status ring: echo RX_STATUS_RING_ORDER > rx_status_ring_order Due to HW constrains RX sring order should be bigger than RX ring order The status ring size will be 1 << rx_status_ring_order Run the following command to change the number of RX buffer IDs: echo RX_BUFF_ID_COUNT > rx_buff_id_count Signed-off-by: Gidon Studinski <gidons@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-29 16:28:23 +03:00
void wil_tx_data_init(struct wil_ring_tx_data *txdata);
void wil_init_txrx_ops_legacy_dma(struct wil6210_priv *wil);
void wil_tx_latency_calc(struct wil6210_priv *wil, struct sk_buff *skb,
struct wil_sta_info *sta);
#endif /* WIL6210_TXRX_H */