microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/arch/s390/kernel/entry.S

1351 строка
36 KiB
ArmAsm
Исходник Обычный вид История

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* S390 low-level entry points.
*
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 13:15:04 +04:00
* Copyright IBM Corp. 1999, 2012
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
* Heiko Carstens <heiko.carstens@de.ibm.com>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*/
[S390] Fix couple of section mismatches. Fix couple of section mismatches. And since we touch the code anyway change the IPL code to use C99 initializers. Cc: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05 18:50:40 +03:00
#include <linux/init.h>
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
#include <linux/linkage.h>
s390/exceptions: switch to relative exception table entries This is the s390 port of 70627654 "x86, extable: Switch to relative exception table entries". Reduces the size of our exception tables by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-05 15:26:11 +04:00
#include <asm/processor.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#include <asm/cache.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h support Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 22:57:26 +04:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#include <asm/unistd.h>
#include <asm/page.h>
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 17:05:43 +04:00
#include <asm/sigp.h>
s390: convert interrupt handling to use generic hardirq With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-27 11:01:09 +04:00
#include <asm/irq.h>
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
#include <asm/fpu-internal.h>
#include <asm/vx-insn.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 8
__PT_R2 = __PT_GPRS + 16
__PT_R3 = __PT_GPRS + 24
__PT_R4 = __PT_GPRS + 32
__PT_R5 = __PT_GPRS + 40
__PT_R6 = __PT_GPRS + 48
__PT_R7 = __PT_GPRS + 56
__PT_R8 = __PT_GPRS + 64
__PT_R9 = __PT_GPRS + 72
__PT_R10 = __PT_GPRS + 80
__PT_R11 = __PT_GPRS + 88
__PT_R12 = __PT_GPRS + 96
__PT_R13 = __PT_GPRS + 104
__PT_R14 = __PT_GPRS + 112
__PT_R15 = __PT_GPRS + 120
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-22 18:39:06 +04:00
_TIF_WORK = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
_TIF_UPROBE)
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \
_TIF_SYSCALL_TRACEPOINT)
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
_CIF_WORK = (_CIF_MCCK_PENDING | _CIF_ASCE | _CIF_FPU)
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
_PIF_WORK = (_PIF_PER_TRAP)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
#define BASED(name) name-cleanup_critical(%r13)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
.macro TRACE_IRQS_ON
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
#ifdef CONFIG_TRACE_IRQFLAGS
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
basr %r2,%r0
brasl %r14,trace_hardirqs_on_caller
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
#endif
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
.endm
.macro TRACE_IRQS_OFF
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
#ifdef CONFIG_TRACE_IRQFLAGS
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
basr %r2,%r0
brasl %r14,trace_hardirqs_off_caller
[S390] Fix irq tracing and lockdep_sys_exit calls. Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 13:13:32 +03:00
#endif
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
.endm
[S390] Fix irq tracing and lockdep_sys_exit calls. Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 13:13:32 +03:00
.macro LOCKDEP_SYS_EXIT
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
#ifdef CONFIG_LOCKDEP
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jz .+10
[S390] Fix irq tracing and lockdep_sys_exit calls. Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 13:13:32 +03:00
brasl %r14,lockdep_sys_exit
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
.endm
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
.macro CHECK_STACK stacksize,savearea
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
#ifdef CONFIG_CHECK_STACK
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tml %r15,\stacksize - CONFIG_STACK_GUARD
lghi %r14,\savearea
jz stack_overflow
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
#endif
.endm
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
.macro SWITCH_ASYNC savearea,timer
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tmhh %r8,0x0001 # interrupting from user ?
jnz 1f
lgr %r14,%r9
slg %r14,BASED(.Lcritical_start)
clg %r14,BASED(.Lcritical_length)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jhe 0f
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lghi %r11,\savearea # inside critical section, do cleanup
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
brasl %r14,cleanup_critical
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tmhh %r8,0x0001 # retest problem state after cleanup
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jnz 1f
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
0: lg %r14,__LC_ASYNC_STACK # are we already on the async stack?
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
slgr %r14,%r15
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
srag %r14,%r14,STACK_SHIFT
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
jnz 2f
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
CHECK_STACK 1<<STACK_SHIFT,\savearea
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
j 3f
1: LAST_BREAK %r14
UPDATE_VTIME %r14,%r15,\timer
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
2: lg %r15,__LC_ASYNC_STACK # load async stack
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
3: la %r11,STACK_FRAME_OVERHEAD(%r15)
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
.endm
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
.macro UPDATE_VTIME w1,w2,enter_timer
lg \w1,__LC_EXIT_TIMER
lg \w2,__LC_LAST_UPDATE_TIMER
slg \w1,\enter_timer
slg \w2,__LC_EXIT_TIMER
alg \w1,__LC_USER_TIMER
alg \w2,__LC_SYSTEM_TIMER
stg \w1,__LC_USER_TIMER
stg \w2,__LC_SYSTEM_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc __LC_LAST_UPDATE_TIMER(8),\enter_timer
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
.endm
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
.macro LAST_BREAK scratch
srag \scratch,%r10,23
jz .+10
stg %r10,__TI_last_break(%r12)
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
.endm
[S390] cleanup lowcore access from program checks Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25 18:10:37 +04:00
.macro REENABLE_IRQS
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stg %r8,__LC_RETURN_PSW
ni __LC_RETURN_PSW,0xbf
ssm __LC_RETURN_PSW
[S390] cleanup lowcore access from program checks Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25 18:10:37 +04:00
.endm
s390/time: always use stckf instead of stck if available The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-09 18:27:39 +04:00
.macro STCK savearea
s390/time: simply Kconfig dependency Use HAVE_MARCH_Z9_109_FEATURES to figure out if stckf is available at compile time. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-14 12:35:22 +04:00
#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
s390/time: always use stckf instead of stck if available The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-09 18:27:39 +04:00
.insn s,0xb27c0000,\savearea # store clock fast
#else
.insn s,0xb2050000,\savearea # store clock
#endif
.endm
[S390] add kprobes annotations Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05 14:47:25 +03:00
.section .kprobes.text, "ax"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Scheduler resume function, called by switch_to
* gpr2 = (task_struct *) prev
* gpr3 = (task_struct *) next
* Returns:
* gpr2 = prev
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(__switch_to)
s390: fix race on TIF_MCCK_PENDING There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 11:20:06 +04:00
stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task
s390: adapt entry.S to the move of thread_struct git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a "x86/fpu, sched: Dynamically allocate 'struct fpu'" moved the thread_struct to the end of the task_struct. This causes some of the offsets used in entry.S to overflow their instruction operand field. To fix this use aghi to create a dedicated pointer for the thread_struct. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-20 11:01:46 +03:00
lgr %r1,%r2
aghi %r1,__TASK_thread # thread_struct of prev task
lg %r4,__TASK_thread_info(%r2) # get thread_info of prev
lg %r5,__TASK_thread_info(%r3) # get thread_info of next
stg %r15,__THREAD_ksp(%r1) # store kernel stack of prev
lgr %r1,%r3
aghi %r1,__TASK_thread # thread_struct of next task
s390: fix race on TIF_MCCK_PENDING There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 11:20:06 +04:00
lgr %r15,%r5
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
aghi %r15,STACK_INIT # end of kernel stack of next
s390: fix race on TIF_MCCK_PENDING There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 11:20:06 +04:00
stg %r3,__LC_CURRENT # store task struct of next
stg %r5,__LC_THREAD_INFO # store thread info of next
stg %r15,__LC_KERNEL_STACK # store end of kernel stack
s390: adapt entry.S to the move of thread_struct git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a "x86/fpu, sched: Dynamically allocate 'struct fpu'" moved the thread_struct to the end of the task_struct. This causes some of the offsets used in entry.S to overflow their instruction operand field. To fix this use aghi to create a dedicated pointer for the thread_struct. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-20 11:01:46 +03:00
lg %r15,__THREAD_ksp(%r1) # load kernel stack of next
s390: fix race on TIF_MCCK_PENDING There is a small race window in the __switch_to code in regard to the transfer of the TIF_MCCK_PENDING bit from the previous to the next task. The bit is transferred before the task struct pointer and the thread-info pointer for the next task has been stored to lowcore. If a machine check sets the TIF_MCCK_PENDING bit between the transfer code and the store of current/thread_info the bit is still set for the previous task. And if the previous task has terminated it can get lost. The effect is that a pending CRW is not retrieved until the next machine checks sets TIF_MCCK_PENDING. To fix this reorder __switch_to to first store the task struct and thread-info pointer and then do the transfer of the bit. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-15 11:20:06 +04:00
lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4
mvc __LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.L__critical_start:
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
#if IS_ENABLED(CONFIG_KVM)
/*
* sie64a calling convention:
* %r2 pointer to sie control block
* %r3 guest register save area
*/
ENTRY(sie64a)
stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers
stg %r2,__SF_EMPTY(%r15) # save control block pointer
stg %r3,__SF_EMPTY+8(%r15) # save guest register save area
xc __SF_EMPTY+16(16,%r15),__SF_EMPTY+16(%r15) # host id & reason
tm __LC_CPU_FLAGS+7,_CIF_FPU # load guest fp/vx registers ?
jno .Lsie_load_guest_gprs
brasl %r14,load_fpu_regs # load guest fp/vx regs
.Lsie_load_guest_gprs:
lmg %r0,%r13,0(%r3) # load guest gprs 0-13
lg %r14,__LC_GMAP # get gmap pointer
ltgr %r14,%r14
jz .Lsie_gmap
lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
.Lsie_gmap:
lg %r14,__SF_EMPTY(%r15) # get control block pointer
oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now
tm __SIE_PROG20+3(%r14),3 # last exit...
jnz .Lsie_skip
tm __LC_CPU_FLAGS+7,_CIF_FPU
jo .Lsie_skip # exit if fp/vx regs changed
tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP
jz .Lsie_enter
KVM: s390: use pid of cpu thread for sampling tagging Right now we use the address of the sie control block as tag for the sampling data. This is hard to get for users. Let's just use the PID of the cpu thread to mark the hardware samples. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-09 18:56:13 +03:00
.insn s,0xb2800000,__LC_CURRENT_PID # set guest id to pid
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
.Lsie_enter:
sie 0(%r14)
tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP
jz .Lsie_skip
.insn s,0xb2800000,__SF_EMPTY+16(%r15)# set host id
.Lsie_skip:
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
.Lsie_done:
# some program checks are suppressing. C code (e.g. do_protection_exception)
# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other
# instructions between sie64a and .Lsie_done should not cause program
# interrupts. So lets use a nop (47 00 00 00) as a landing pad.
# See also .Lcleanup_sie
.Lrewind_pad:
nop 0
.globl sie_exit
sie_exit:
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
lg %r2,__SF_EMPTY+24(%r15) # return exit reason code
br %r14
.Lsie_fault:
lghi %r14,-EFAULT
stg %r14,__SF_EMPTY+24(%r15) # set exit reason code
j sie_exit
EX_TABLE(.Lrewind_pad,.Lsie_fault)
EX_TABLE(sie_exit,.Lsie_fault)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* SVC interrupt handler routine. System calls are synchronous events and
* are executed with interrupts enabled.
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(system_call)
[S390] Remove config options. On s390 we always want to run with precise cputime accounting. Remove the config options VIRT_TIMER and VIRT_CPU_ACCOUNTING. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 15:39:25 +03:00
stpt __LC_SYNC_ENTER_TIMER
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_stmg:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
lg %r10,__LC_LAST_BREAK
lg %r12,__LC_THREAD_INFO
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
lghi %r14,_PIF_SYSCALL
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_per:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r15,__LC_KERNEL_STACK
la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs
LAST_BREAK %r13
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
.Lsysc_vtime:
UPDATE_VTIME %r10,%r13,__LC_SYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
mvc __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:18 +04:00
mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
stg %r14,__PT_FLAGS(%r11)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_do_svc:
s390: system call path micro optimization Add a pointer to the system call table to the thread_info structure. The TIF_31BIT bit is set or cleared by SET_PERSONALITY exactly once for the lifetime of a process. With the pointer to the correct system call table in thread_info the system call code in entry64.S path can drop the check for TIF_31BIT which saves a couple of instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 14:58:39 +04:00
lg %r10,__TI_sysc_table(%r12) # address of system call table
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:18 +04:00
llgh %r8,__PT_INT_CODE+2(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
slag %r8,%r8,2 # shift and test for svc 0
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lsysc_nr_ok
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
# svc 0: system call number in %r1
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
llgfr %r1,%r1 # clear high word in r1
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
cghi %r1,NR_syscalls
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnl .Lsysc_nr_ok
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:18 +04:00
sth %r1,__PT_INT_CODE+2(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
slag %r8,%r1,2
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_nr_ok:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
stg %r2,__PT_ORIG_GPR2(%r11)
stg %r7,STACK_FRAME_OVERHEAD(%r15)
lgf %r9,0(%r8,%r10) # get system call add.
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __TI_flags+7(%r12),_TIF_TRACE
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lsysc_tracesys
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
basr %r14,%r9 # call sys_xxxx
stg %r2,__PT_R2(%r11) # store return value
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_return:
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
LOCKDEP_SYS_EXIT
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_tif:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __PT_FLAGS+7(%r11),_PIF_WORK
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lsysc_work
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __TI_flags+7(%r12),_TIF_WORK
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lsysc_work # check for work
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_WORK
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lsysc_work
.Lsysc_restore:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r14,__LC_VDSO_PER_CPU
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
stpt __LC_EXIT_TIMER
mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
lmg %r11,%r15,__PT_R11(%r11)
lpswe __LC_RETURN_PSW
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_done:
[S390] Fix irq tracing and lockdep_sys_exit calls. Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 13:13:32 +03:00
[S390] cleanup sysc_work and io_work code Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:01 +04:00
#
# One of the work bits is on. Find out which one.
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_work:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_mcck_pending
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_reschedule
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-22 18:39:06 +04:00
#ifdef CONFIG_UPROBES
tm __TI_flags+7(%r12),_TIF_UPROBE
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_uprobe_notify
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-22 18:39:06 +04:00
#endif
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __PT_FLAGS+7(%r11),_PIF_PER_TRAP
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_singlestep
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
tm __TI_flags+7(%r12),_TIF_SIGPENDING
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_sigpending
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_notify_resume
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
tm __LC_CPU_FLAGS+7,_CIF_FPU
jo .Lsysc_vxrs
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_ASCE
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lsysc_uaccess
j .Lsysc_return # beware of critical section cleanup
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# _TIF_NEED_RESCHED is set, call schedule
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_reschedule:
larl %r14,.Lsysc_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jg schedule
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
#
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
# _CIF_MCCK_PENDING is set, call handler
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_mcck_pending:
larl %r14,.Lsysc_return
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
jg s390_handle_mcck # TIF bit will be cleared by handler
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
#
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
# _CIF_ASCE is set, load user space asce
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_uaccess:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
ni __LC_CPU_FLAGS+7,255-_CIF_ASCE
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lsysc_return
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
#
# CIF_FPU is set, restore floating-point controls and floating-point registers.
#
.Lsysc_vxrs:
larl %r14,.Lsysc_return
jg load_fpu_regs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
signals: s390: renumber TIF_RESTORE_SIGMASK TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks. Those low bits are scarce, and are all used up now. Renumber TIF_RESTORE_SIGMASK to free one up. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 11:53:08 +04:00
# _TIF_SIGPENDING is set, call do_signal
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_sigpending:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_signal
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __PT_FLAGS+7(%r11),_PIF_SYSCALL
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jno .Lsysc_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r2,%r7,__PT_R2(%r11) # load svc arguments
s390: fix system call restart after inferior call Git commit 616498813b11ffef "s390: system call path micro optimization" introduced a regression in regard to system call restarting and inferior function calls via the ptrace interface. The pointer to the system call table needs to be loaded in sysc_sigpending if do_signal returns with TIF_SYSCALl set after it restored a system call context. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-27 17:24:38 +04:00
lg %r10,__TI_sysc_table(%r12) # address of system call table
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lghi %r8,0 # svc 0 returns -ENOSYS
s390/entry: fix svc number for TIF_SYSCALL system call restart The load of the svc number in the TIF_SYSCALL restart path needs to be done with an instruction that loads all 64 bits of %r1, 'lh' only loads 32 bits. If the upper half of %r1 is not zero and has the msb set, entry64.S will try to execute an svc with a really large number. What will be in the upper half of %r1 depends on the code generated by gcc for the functions on the do_signal() callchain. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-09 15:33:53 +04:00
llgh %r1,__PT_INT_CODE+2(%r11) # load new svc number
[S390] add TIF_SYSCALL thread flag Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 18:16:49 +04:00
cghi %r1,NR_syscalls
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnl .Lsysc_nr_ok # invalid svc number -> do svc 0
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
slag %r8,%r1,2
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lsysc_nr_ok # restart svc
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
#
# _TIF_NOTIFY_RESUME is set, call do_notify_resume
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_notify_resume:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r14,.Lsysc_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jg do_notify_resume
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-22 18:39:06 +04:00
#
# _TIF_UPROBE is set, call uprobe_notify_resume
#
#ifdef CONFIG_UPROBES
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_uprobe_notify:
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-22 18:39:06 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r14,.Lsysc_return
s390/uprobes: architecture backend for uprobes Signed-off-by: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-09-22 18:39:06 +04:00
jg uprobe_notify_resume
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
# _PIF_PER_TRAP is set, call do_per_trap
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_singlestep:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
ni __PT_FLAGS+7(%r11),255-_PIF_PER_TRAP
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r14,.Lsysc_return
[S390] ptrace cleanup Overhaul program event recording and the code dealing with the ptrace user space interface. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05 14:48:10 +03:00
jg do_per_trap
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
# call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
# and after the system call
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_tracesys:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
la %r3,0
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:18 +04:00
llgh %r0,__PT_INT_CODE+2(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stg %r0,__PT_R2(%r11)
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
brasl %r14,do_syscall_trace_enter
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
lghi %r0,NR_syscalls
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
clgr %r0,%r2
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnh .Lsysc_tracenogo
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
sllg %r8,%r2,2
lgf %r9,0(%r8,%r10)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_tracego:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r3,%r7,__PT_R3(%r11)
stg %r7,STACK_FRAME_OVERHEAD(%r15)
lg %r2,__PT_ORIG_GPR2(%r11)
basr %r14,%r9 # call sys_xxx
stg %r2,__PT_R2(%r11) # store return value
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lsysc_tracenogo:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __TI_flags+7(%r12),_TIF_TRACE
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jz .Lsysc_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r14,.Lsysc_return
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
jg do_syscall_trace_exit
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# a new process exits the kernel with ret_from_fork
#
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(ret_from_fork)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
la %r11,STACK_FRAME_OVERHEAD(%r15)
lg %r12,__LC_THREAD_INFO
s390: fold kernel_thread_helper() into ret_from_fork() ... and don't bother with syscall return path in case of kernel threads. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-11 02:03:41 +04:00
brasl %r14,schedule_tail
TRACE_IRQS_ON
ssm __LC_SVC_NEW_PSW # reenable interrupts
s390: switch to saner kernel_execve() semantics Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-11 23:30:14 +04:00
tm __PT_PSW+1(%r11),0x01 # forking a kernel thread ?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jne .Lsysc_tracenogo
s390: switch to saner kernel_execve() semantics Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-11 23:30:14 +04:00
# it's a kernel thread
lmg %r9,%r10,__PT_R9(%r11) # load gprs
s390: fold kernel_thread_helper() into ret_from_fork() ... and don't bother with syscall return path in case of kernel threads. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-11 02:03:41 +04:00
ENTRY(kernel_thread_starter)
la %r2,0(%r10)
basr %r14,%r9
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lsysc_tracenogo
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Program check handler routine
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(pgm_check_handler)
[S390] Remove config options. On s390 we always want to run with precise cputime accounting. Remove the config options VIRT_TIMER and VIRT_CPU_ACCOUNTING. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 15:39:25 +03:00
stpt __LC_SYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
lg %r10,__LC_LAST_BREAK
lg %r12,__LC_THREAD_INFO
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
larl %r13,cleanup_critical
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r8,%r9,__LC_PGM_OLD_PSW
tmhh %r8,0x0001 # test problem state bit
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
jnz 2f # -> fault in user space
#if IS_ENABLED(CONFIG_KVM)
# cleanup critical section for sie64a
lgr %r14,%r9
slg %r14,BASED(.Lsie_critical_start)
clg %r14,BASED(.Lsie_critical_length)
jhe 0f
brasl %r14,.Lcleanup_sie
#endif
0: tmhh %r8,0x4000 # PER bit set in old PSW ?
jnz 1f # -> enabled, can't be a double fault
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tm __LC_PGM_ILC+3,0x80 # check for per exception
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lpgm_svcper # -> single stepped svc
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
1: CHECK_STACK STACK_SIZE,__LC_SAVE_AREA_SYNC
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
j 3f
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
2: LAST_BREAK %r14
UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r15,__LC_KERNEL_STACK
s390: add support for transactional memory Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-31 13:03:04 +04:00
lg %r14,__TI_task(%r12)
s390: adapt entry.S to the move of thread_struct git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a "x86/fpu, sched: Dynamically allocate 'struct fpu'" moved the thread_struct to the end of the task_struct. This causes some of the offsets used in entry.S to overflow their instruction operand field. To fix this use aghi to create a dedicated pointer for the thread_struct. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-07-20 11:01:46 +03:00
aghi %r14,__TASK_thread # pointer to thread_struct
s390: add support for transactional memory Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-31 13:03:04 +04:00
lghi %r13,__LC_PGM_TDB
tm __LC_PGM_ILC+2,0x02 # check for transaction abort
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
jz 3f
s390: add support for transactional memory Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-31 13:03:04 +04:00
mvc __THREAD_trap_tdb(256,%r14),0(%r13)
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
3: la %r11,STACK_FRAME_OVERHEAD(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
stmg %r8,%r9,__PT_PSW(%r11)
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:18 +04:00
mvc __PT_INT_CODE(4,%r11),__LC_PGM_ILC
mvc __PT_INT_PARM_LONG(8,%r11),__LC_TRANS_EXC_CODE
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stg %r10,__PT_ARGS(%r11)
tm __LC_PGM_ILC+3,0x80 # check for per exception
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
jz 4f
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tmhh %r8,0x0001 # kernel per event ?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jz .Lpgm_kprobe
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
oi __PT_FLAGS+7(%r11),_PIF_PER_TRAP
s390: add support for transactional memory Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-31 13:03:04 +04:00
mvc __THREAD_per_address(8,%r14),__LC_PER_ADDRESS
s390: rename and split lowcore field per_perc_atmid per_perc_atmid is currently a two-byte field that combines two fields, the PER code and the PER Addressing-and-Translation-Mode Identification (ATMID) Let's make them accessible indepently and also rename per_cause to per_code. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-26 19:32:46 +04:00
mvc __THREAD_per_cause(2,%r14),__LC_PER_CODE
mvc __THREAD_per_paid(1,%r14),__LC_PER_ACCESS_ID
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
4: REENABLE_IRQS
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
[S390] Fix IRQ tracing in case of PER In case user space is single stepped (PER) the program check handler claims too early that IRQs are enabled on the return path. Subsequent checks will notice that the IRQ mask in the PSW and what lockdep thinks the IRQ mask should be do not correlate and therefore will print a warning to the console and disable lockdep. Fix this by doing all the work within the correct context. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-07-27 21:29:37 +04:00
larl %r1,pgm_check_table
[S390] cleanup trap handling Move the program interruption code and the translation exception identifier to the pt_regs structure as 'int_code' and 'int_parm_long' and make the first level interrupt handler in entry[64].S store the two values. That makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct and to reduce the number of arguments to a lot of functions. Finally un-inline do_trap. Overall this saves 5812 bytes in the .text section of the 64 bit kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:18 +04:00
llgh %r10,__PT_INT_CODE+2(%r11)
nill %r10,0x007f
s390/traps: preinitialize program check table Preinitialize the program check table, so we can put it into the read-only data section. Also use only four byte entries for the table, since each program check handler resides within the first 2GB. Therefore this reduces the size of the table by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-18 20:10:06 +04:00
sll %r10,2
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
je .Lpgm_return
s390/traps: preinitialize program check table Preinitialize the program check table, so we can put it into the read-only data section. Also use only four byte entries for the table, since each program check handler resides within the first 2GB. Therefore this reduces the size of the table by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-10-18 20:10:06 +04:00
lgf %r1,0(%r10,%r1) # load address of handler routine
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
[S390] Fix IRQ tracing in case of PER In case user space is single stepped (PER) the program check handler claims too early that IRQs are enabled on the return path. Subsequent checks will notice that the IRQ mask in the PSW and what lockdep thinks the IRQ mask should be do not correlate and therefore will print a warning to the console and disable lockdep. Fix this by doing all the work within the correct context. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-07-27 21:29:37 +04:00
basr %r14,%r1 # branch to interrupt-handler
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
.Lpgm_return:
LOCKDEP_SYS_EXIT
tm __PT_PSW+1(%r11),0x01 # returning to user ?
jno .Lsysc_restore
j .Lsysc_tif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
# PER event in supervisor state, must be kprobes
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lpgm_kprobe:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
REENABLE_IRQS
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_per_trap
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
j .Lpgm_return
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] add kprobes support. Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 17:58:39 +04:00
#
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
# single stepped system call
[S390] add kprobes support. Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 17:58:39 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lpgm_svcper:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r14,.Lsysc_per
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stg %r14,__LC_RETURN_PSW+8
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
lghi %r14,_PIF_SYSCALL | _PIF_PER_TRAP
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
lpswe __LC_RETURN_PSW # branch to .Lsysc_per and enable irqs
[S390] add kprobes support. Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20 17:58:39 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* IO interrupt handler routine
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(io_int_handler)
s390/time: always use stckf instead of stck if available The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-09 18:27:39 +04:00
STCK __LC_INT_CLOCK
[PATCH] improve idle cputime accounting Distinguish the cputime of the idle process where idle is actually using cpu cycles from the cputime where idle is sleeping on an enabled wait psw. The former is accounted as system time, the later as idle time. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-31 17:11:41 +03:00
stpt __LC_ASYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r8,%r15,__LC_SAVE_AREA_ASYNC
lg %r10,__LC_LAST_BREAK
lg %r12,__LC_THREAD_INFO
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
larl %r13,cleanup_critical
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r8,%r9,__LC_IO_OLD_PSW
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
stmg %r8,%r9,__PT_PSW(%r11)
s390/irq: store interrupt information in pt_regs Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-17 16:54:02 +04:00
mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
TRACE_IRQS_OFF
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_loop:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: convert interrupt handling to use generic hardirq With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-27 11:01:09 +04:00
lghi %r3,IO_INTERRUPT
tm __PT_INT_CODE+8(%r11),0x80 # adapter interrupt ?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jz .Lio_call
s390: convert interrupt handling to use generic hardirq With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-27 11:01:09 +04:00
lghi %r3,THIN_INTERRUPT
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_call:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
brasl %r14,do_IRQ
s390/irq: store interrupt information in pt_regs Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-17 16:54:02 +04:00
tm __LC_MACHINE_FLAGS+6,0x10 # MACHINE_FLAG_LPAR
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jz .Lio_return
s390/irq: store interrupt information in pt_regs Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-17 16:54:02 +04:00
tpi 0
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jz .Lio_return
s390/irq: store interrupt information in pt_regs Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-17 16:54:02 +04:00
mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_loop
.Lio_return:
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
LOCKDEP_SYS_EXIT
TRACE_IRQS_ON
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_tif:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __TI_flags+7(%r12),_TIF_WORK
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lio_work # there is work to do (signals etc.)
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_WORK
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lio_work
.Lio_restore:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r14,__LC_VDSO_PER_CPU
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
stpt __LC_EXIT_TIMER
mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
lmg %r11,%r15,__PT_R11(%r11)
lpswe __LC_RETURN_PSW
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_done:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] s390: Optimize user and work TIF check On return from syscall or interrupt, we have to check if we return to userspace (likely) and if there is work todo (less likely) to decide if we handle the work. We can optimize this check: we first check for the less likely work case and then check for userspace. This patch is also a preparation for an additional patch, that fixes a bug in KVM dealing with cpu bound guests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 11:22:52 +04:00
#
[S390] cleanup sysc_work and io_work code Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:01 +04:00
# There is work todo, find out in which context we have been interrupted:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
# 1) if we return to user space we can do all _TIF_WORK work
[S390] cleanup sysc_work and io_work code Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:01 +04:00
# 2) if we return to kernel code and kvm is enabled check if we need to
# modify the psw to leave SIE
# 3) if we return to kernel code and preemptive scheduling is enabled check
# the preemption counter and if it is zero call preempt_schedule_irq
# Before any work can be done, a switch to the kernel stack is required.
[S390] s390: Optimize user and work TIF check On return from syscall or interrupt, we have to check if we return to userspace (likely) and if there is work todo (less likely) to decide if we handle the work. We can optimize this check: we first check for the less likely work case and then check for userspace. This patch is also a preparation for an additional patch, that fixes a bug in KVM dealing with cpu bound guests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 11:22:52 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_work:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tm __PT_PSW+1(%r11),0x01 # returning to user ?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lio_work_user # yes -> do resched & signal
[S390] cleanup sysc_work and io_work code Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:01 +04:00
#ifdef CONFIG_PREEMPT
[S390] s390: Optimize user and work TIF check On return from syscall or interrupt, we have to check if we return to userspace (likely) and if there is work todo (less likely) to decide if we handle the work. We can optimize this check: we first check for the less likely work case and then check for userspace. This patch is also a preparation for an additional patch, that fixes a bug in KVM dealing with cpu bound guests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 11:22:52 +04:00
# check for preemptive scheduling
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
icm %r0,15,__TI_precount(%r12)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jnz .Lio_restore # preemption is disabled
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jno .Lio_restore
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
# switch to kernel stack
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r1,__PT_R15(%r11)
aghi %r1,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
lgr %r15,%r1
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
# TRACE_IRQS_ON already done at .Lio_return, call
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
# TRACE_IRQS_OFF to keep things symmetrical
TRACE_IRQS_OFF
brasl %r14,preempt_schedule_irq
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
#else
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_restore
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] cleanup sysc_work and io_work code Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:01 +04:00
#
# Need to do work before returning to userspace, switch to kernel stack
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_work_user:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
lg %r1,__LC_KERNEL_STACK
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
lgr %r15,%r1
[S390] cleanup sysc_work and io_work code Cleanup the #ifdef mess at io_work in entry[64].S and streamline the TIF work code of the system call and io exit path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:01 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# One of the work bits is on. Find out which one.
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_work_tif:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lio_mcck_pending
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
tm __TI_flags+7(%r12),_TIF_NEED_RESCHED
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lio_reschedule
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
tm __TI_flags+7(%r12),_TIF_SIGPENDING
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lio_sigpending
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lio_notify_resume
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
tm __LC_CPU_FLAGS+7,_CIF_FPU
jo .Lio_vxrs
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_ASCE
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lio_uaccess
j .Lio_return # beware of critical section cleanup
[S390] s390-kvm: leave sie context on work. Removes preemption requirement From: Martin Schwidefsky <schwidefsky@de.ibm.com> This patch fixes a bug with cpu bound guest on kvm-s390. Sometimes it was impossible to deliver a signal to a spinning guest. We used preemption as a circumvention. The preemption notifiers called vcpu_load, which checked for pending signals and triggered a host intercept. But even with preemption, a sigkill was not delivered immediately. This patch changes the low level host interrupt handler to check for the SIE instruction, if TIF_WORK is set. In that case we change the instruction pointer of the return PSW to rerun the vcpu_run loop. The kvm code sees an intercept reason 0 if that happens. This patch adds accounting for these types of intercept as well. The advantages: - works with and without preemption - signals are delivered immediately - much better host latencies without preemption Acked-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-07 11:22:53 +04:00
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
#
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
# _CIF_MCCK_PENDING is set, call handler
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_mcck_pending:
# TRACE_IRQS_ON already done at .Lio_return
[S390] Fix IRQ tracing. If a machine check is pending and the external or I/O interrupt handler returns to userspace io_mcck_pending is going to call s390_handle_mcck. Before this happens a call to TRACE_IRQS_ON was already made since we know that we are going back to userspace and hence interrupts will be enabled. So there was an indication that interrupts are enabled while in reality they are still disabled. s390_handle_mcck will do a local_irq_save/restore pair and confuse lockdep which later complains about inconsistent irq tracing. To solve this just call trace_hardirqs_off before calling s390_handle_mcck and trace_hardirqs_on afterwards. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27 14:29:18 +04:00
brasl %r14,s390_handle_mcck # TIF bit will be cleared by handler
[S390] improve irq tracing code in entry[64].S The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:02 +04:00
TRACE_IRQS_OFF
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
#
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
# _CIF_ASCE is set, load user space asce
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_uaccess:
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
ni __LC_CPU_FLAGS+7,255-_CIF_ASCE
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
s390/uaccess: rework uaccess code - fix locking issues The current uaccess code uses a page table walk in some circumstances, e.g. in case of the in atomic futex operations or if running on old hardware which doesn't support the mvcos instruction. However it turned out that the page table walk code does not correctly lock page tables when accessing page table entries. In other words: a different cpu may invalidate a page table entry while the current cpu inspects the pte. This may lead to random data corruption. Adding correct locking however isn't trivial for all uaccess operations. Especially copy_in_user() is problematic since that requires to hold at least two locks, but must be protected against ABBA deadlock when a different cpu also performs a copy_in_user() operation. So the solution is a different approach where we change address spaces: User space runs in primary address mode, or access register mode within vdso code, like it currently already does. The kernel usually also runs in home space mode, however when accessing user space the kernel switches to primary or secondary address mode if the mvcos instruction is not available or if a compare-and-swap (futex) instruction on a user space address is performed. KVM however is special, since that requires the kernel to run in home address space while implicitly accessing user space with the sie instruction. So we end up with: User space: - runs in primary or access register mode - cr1 contains the user asce - cr7 contains the user asce - cr13 contains the kernel asce Kernel space: - runs in home space mode - cr1 contains the user or kernel asce -> the kernel asce is loaded when a uaccess requires primary or secondary address mode - cr7 contains the user or kernel asce, (changed with set_fs()) - cr13 contains the kernel asce In case of uaccess the kernel changes to: - primary space mode in case of a uaccess (copy_to_user) and uses e.g. the mvcp instruction to access user space. However the kernel will stay in home space mode if the mvcos instruction is available - secondary space mode in case of futex atomic operations, so that the instructions come from primary address space and data from secondary space In case of kvm the kernel runs in home space mode, but cr1 gets switched to contain the gmap asce before the sie instruction gets executed. When the sie instruction is finished cr1 will be switched back to contain the user asce. A context switch between two processes will always load the kernel asce for the next process in cr1. So the first exit to user space is a bit more expensive (one extra load control register instruction) than before, however keeps the code rather simple. In sum this means there is no need to perform any error prone page table walks anymore when accessing user space. The patch seems to be rather large, however it mainly removes the the page table walk code and restores the previously deleted "standard" uaccess code, with a couple of changes. The uaccess without mvcos mode can be enforced with the "uaccess_primary" kernel parameter. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-03-21 13:42:25 +04:00
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
#
# CIF_FPU is set, restore floating-point controls and floating-point registers.
#
.Lio_vxrs:
larl %r14,.Lio_return
jg load_fpu_regs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
# _TIF_NEED_RESCHED is set, call schedule
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_reschedule:
# TRACE_IRQS_ON already done at .Lio_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
ssm __LC_SVC_NEW_PSW # reenable interrupts
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
brasl %r14,schedule # call scheduler
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts
[S390] Fix irq tracing and lockdep_sys_exit calls. Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 13:13:32 +03:00
TRACE_IRQS_OFF
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
signals: s390: renumber TIF_RESTORE_SIGMASK TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks. Those low bits are scarce, and are all used up now. Renumber TIF_RESTORE_SIGMASK to free one up. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 11:53:08 +04:00
# _TIF_SIGPENDING or is set, call do_signal
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_sigpending:
# TRACE_IRQS_ON already done at .Lio_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
ssm __LC_SVC_NEW_PSW # reenable interrupts
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_signal
ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts
[S390] Fix irq tracing and lockdep_sys_exit calls. Current support for TRACE_IRQFLAGS and lockdep_sys_exit is broken. IRQ flag tracing is broken for program checks. Even worse is that the newly introduced calls to lockdep_sys_exit are in the critical section code which is not supposed to call any C functions. In addition the checks if locks are still held are also done when returning to kernel code which is broken as well. Fix all this by disabling interrupts and machine checks at the exit paths and then do the appropriate checks and calls. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 13:13:32 +03:00
TRACE_IRQS_OFF
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
#
# _TIF_NOTIFY_RESUME or is set, call do_notify_resume
#
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lio_notify_resume:
# TRACE_IRQS_ON already done at .Lio_return
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
ssm __LC_SVC_NEW_PSW # reenable interrupts
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,do_notify_resume
ssm __LC_PGM_NEW_PSW # disable I/O and ext. interrupts
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
TRACE_IRQS_OFF
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
[S390] ptrace changes * System call parameter and result access functions * Add tracehook calls * Split syscall_trace into two functions do_syscall_trace_enter and do_syscall_trace_exit Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10 23:33:20 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* External interrupt handler routine
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(ext_int_handler)
s390/time: always use stckf instead of stck if available The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-09 18:27:39 +04:00
STCK __LC_INT_CLOCK
[PATCH] improve idle cputime accounting Distinguish the cputime of the idle process where idle is actually using cpu cycles from the cputime where idle is sleeping on an enabled wait psw. The former is accounted as system time, the later as idle time. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-31 17:11:41 +03:00
stpt __LC_ASYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r8,%r15,__LC_SAVE_AREA_ASYNC
lg %r10,__LC_LAST_BREAK
lg %r12,__LC_THREAD_INFO
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
larl %r13,cleanup_critical
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r8,%r9,__LC_EXT_OLD_PSW
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
SWITCH_ASYNC __LC_SAVE_AREA_ASYNC,__LC_ASYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
stmg %r8,%r9,__PT_PSW(%r11)
s390/irq: store interrupt information in pt_regs Copy the interrupt parameters from the lowcore to the pt_regs structure in entry[64].S and reduce the arguments of the low level interrupt handler to the pt_regs pointer only. In addition move the test-pending-interrupt loop from do_IRQ to entry[64].S to make sure that interrupt information is always delivered via pt_regs. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-17 16:54:02 +04:00
lghi %r1,__LC_EXT_PARAMS2
mvc __PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR
mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS
mvc __PT_INT_PARM_LONG(8,%r11),0(%r1)
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
TRACE_IRQS_OFF
s390: initialize backchain for ext_int_handler() To allow correct stack backtraces the backchain for the external interrupt handler is now initialized with zero like it is already done for example by io_int_handler(). Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-09 18:27:35 +04:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lgr %r2,%r11 # pass pointer to pt_regs
s390: convert interrupt handling to use generic hardirq With the introduction of PCI it became apparent that s390 should convert to generic hardirqs as too many drivers do not have the correct dependency for GENERIC_HARDIRQS. On the architecture level s390 does not have irq lines. It has external interrupts, I/O interrupts and adapter interrupts. This patch hard-codes all external interrupts as irq #1, all I/O interrupts as irq #2 and all adapter interrupts as irq #3. The additional information from the lowcore associated with the interrupt is stored in the pt_regs of the interrupt frame, where the interrupt handler can pick it up. For PCI/MSI interrupts the adapter interrupt handler scans the relevant bit fields and calls generic_handle_irq with the virtual irq number for the MSI interrupt. Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-06-27 11:01:09 +04:00
lghi %r3,EXT_INTERRUPT
brasl %r14,do_IRQ
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lio_return
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
/*
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
* Load idle PSW. The second "half" of this function is in .Lcleanup_idle.
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
*/
ENTRY(psw_idle)
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
stg %r3,__SF_EMPTY(%r15)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r1,.Lpsw_idle_lpsw+4
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
stg %r1,__SF_EMPTY+8(%r15)
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
STCK __CLOCK_IDLE_ENTER(%r2)
stpt __TIMER_IDLE_ENTER(%r2)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lpsw_idle_lpsw:
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
lpswe __SF_EMPTY(%r15)
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lpsw_idle_end:
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
/* Store floating-point controls and floating-point or vector extension
* registers instead. A critical section cleanup assures that the registers
* are stored even if interrupted for some other work. The register %r2
* designates a struct fpu to store register contents. If the specified
* structure does not contain a register save area, the register store is
* omitted (see also comments in arch_dup_task_struct()).
*
* The CIF_FPU flag is set in any case. The CIF_FPU triggers a lazy restore
* of the register contents at system call or io return.
*/
ENTRY(save_fpu_regs)
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lg %r2,__LC_CURRENT
aghi %r2,__TASK_thread
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
tm __LC_CPU_FLAGS+7,_CIF_FPU
bor %r14
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
stfpc __THREAD_FPU_fpc(%r2)
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
.Lsave_fpu_regs_fpc_end:
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lg %r3,__THREAD_FPU_regs(%r2)
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
ltgr %r3,%r3
jz .Lsave_fpu_regs_done # no save area -> set CIF_FPU
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
tm __THREAD_FPU_flags+3(%r2),FPU_USE_VX
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
jz .Lsave_fpu_regs_fp # no -> store FP regs
.Lsave_fpu_regs_vx_low:
VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3)
.Lsave_fpu_regs_vx_high:
VSTM %v16,%v31,256,%r3 # vstm 16,31,256(3)
j .Lsave_fpu_regs_done # -> set CIF_FPU flag
.Lsave_fpu_regs_fp:
std 0,0(%r3)
std 1,8(%r3)
std 2,16(%r3)
std 3,24(%r3)
std 4,32(%r3)
std 5,40(%r3)
std 6,48(%r3)
std 7,56(%r3)
std 8,64(%r3)
std 9,72(%r3)
std 10,80(%r3)
std 11,88(%r3)
std 12,96(%r3)
std 13,104(%r3)
std 14,112(%r3)
std 15,120(%r3)
.Lsave_fpu_regs_done:
oi __LC_CPU_FLAGS+7,_CIF_FPU
br %r14
.Lsave_fpu_regs_end:
/* Load floating-point controls and floating-point or vector extension
* registers. A critical section cleanup assures that the register contents
* are loaded even if interrupted for some other work. Depending on the saved
* FP/VX state, the vector-enablement control, CR0.46, is either set or cleared.
*
* There are special calling conventions to fit into sysc and io return work:
* %r15: <kernel stack>
* The function requires:
* %r4 and __SF_EMPTY+32(%r15)
*/
load_fpu_regs:
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lg %r4,__LC_CURRENT
aghi %r4,__TASK_thread
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
tm __LC_CPU_FLAGS+7,_CIF_FPU
bnor %r14
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lfpc __THREAD_FPU_fpc(%r4)
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
tm __THREAD_FPU_flags+3(%r4),FPU_USE_VX # VX-enabled task ?
lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
jz .Lload_fpu_regs_fp_ctl # -> no VX, load FP regs
.Lload_fpu_regs_vx_ctl:
tm __SF_EMPTY+32+5(%r15),2 # test VX control
jo .Lload_fpu_regs_vx
oi __SF_EMPTY+32+5(%r15),2 # set VX control
lctlg %c0,%c0,__SF_EMPTY+32(%r15)
.Lload_fpu_regs_vx:
VLM %v0,%v15,0,%r4
.Lload_fpu_regs_vx_high:
VLM %v16,%v31,256,%r4
j .Lload_fpu_regs_done
.Lload_fpu_regs_fp_ctl:
tm __SF_EMPTY+32+5(%r15),2 # test VX control
jz .Lload_fpu_regs_fp
ni __SF_EMPTY+32+5(%r15),253 # clear VX control
lctlg %c0,%c0,__SF_EMPTY+32(%r15)
.Lload_fpu_regs_fp:
ld 0,0(%r4)
ld 1,8(%r4)
ld 2,16(%r4)
ld 3,24(%r4)
ld 4,32(%r4)
ld 5,40(%r4)
ld 6,48(%r4)
ld 7,56(%r4)
ld 8,64(%r4)
ld 9,72(%r4)
ld 10,80(%r4)
ld 11,88(%r4)
ld 12,96(%r4)
ld 13,104(%r4)
ld 14,112(%r4)
ld 15,120(%r4)
.Lload_fpu_regs_done:
ni __LC_CPU_FLAGS+7,255-_CIF_FPU
br %r14
.Lload_fpu_regs_end:
/* Test and set the vector enablement control in CR0.46 */
ENTRY(__ctl_set_vx)
stctg %c0,%c0,__SF_EMPTY(%r15)
tm __SF_EMPTY+5(%r15),2
bor %r14
oi __SF_EMPTY+5(%r15),2
lctlg %c0,%c0,__SF_EMPTY(%r15)
br %r14
.L__ctl_set_vx_end:
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.L__critical_end:
[PATCH] s390: machine check handler bugs The new machine check handler still has a few bugs. 1) The system entry time has to be stored in the machine check handler, 2) the machine check return psw may not be stored at the usual place because it might overwrite the return psw of the interrupted context, 3) the return address for the call to s390_handle_mcck in the i/o interrupt handler is not correct, 4) the system call cleanup has to take the different save area of the machine check handler into account, 5) the machine check handler may not call UPDATE_VTIME before CREATE_STACK_FRAME, and 6) the io leave path needs a critical section cleanup to make sure that the TIF_MCCK_PENDING bit is really checked before switching back to user space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 02:57:56 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Machine check handler routines
*/
[S390] fix s390 assembler code alignments The alignment is missing for various global symbols in s390 assembly code. With a recent gcc and an instruction like stgrl this can lead to a specification exception if the instruction uses such a mis-aligned address. Specify the alignment explicitely and while add it define __ALIGN for s390 and use the ENTRY define to save some lines of code. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:19 +04:00
ENTRY(mcck_int_handler)
s390/time: always use stckf instead of stck if available The store clock fast instruction saves a couple of instructions compared to the store clock instruction. Always use stckf instead of stck if it is available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-05-09 18:27:39 +04:00
STCK __LC_MCCK_CLOCK
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
la %r1,4095 # revalidate r1
spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r10,__LC_LAST_BREAK
lg %r12,__LC_THREAD_INFO
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
larl %r13,cleanup_critical
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lmg %r8,%r9,__LC_MCK_OLD_PSW
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
tm __LC_MCCK_CODE,0x80 # system damage?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jo .Lmcck_panic # yes -> rest of mcck code invalid
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lghi %r14,__LC_CPU_TIMER_SAVE_AREA
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid?
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jo 3f
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
la %r14,__LC_SYNC_ENTER_TIMER
clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER
jl 0f
la %r14,__LC_ASYNC_ENTER_TIMER
0: clc 0(8,%r14),__LC_EXIT_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jl 1f
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
la %r14,__LC_EXIT_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER
jl 2f
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
la %r14,__LC_LAST_UPDATE_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
2: spt 0(%r14)
[S390] idle time accounting vs. machine checks A machine check can interrupt the i/o and external interrupt handler anytime. If the machine check occurs while the interrupt handler is waking up from idle vtime_start_cpu can get executed a second time and the int_clock / async_enter_timer values in the lowcore get clobbered. This can confuse the cpu time accounting. To fix this problem two changes are needed. First the machine check handler has to use its own copies of int_clock and async_enter_timer, named mcck_clock and mcck_enter_timer. Second the nested execution of vtime_start_cpu has to be prevented. This is done in s390_idle_check by checking the wait bit in the program status word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:03 +04:00
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
3: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jno .Lmcck_panic # no -> skip cleanup critical
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+64,__LC_MCCK_ENTER_TIMER
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lmcck_skip:
s390: critical section cleanup vs. machine checks The current machine check code uses the registers stored by the machine in the lowcore at __LC_GPREGS_SAVE_AREA as the registers of the interrupted context. The registers 0-7 of a user process can get clobbered if a machine checks interrupts the execution of a critical section in entry[64].S. The reason is that the critical section cleanup code may need to modify the PSW and the registers for the previous context to get to the end of a critical section. If registers 0-7 have to be replaced the relevant copy will be in the registers, which invalidates the copy in the lowcore. The machine check handler needs to explicitly store registers 0-7 to the stack. Cc: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-28 19:28:41 +04:00
lghi %r14,__LC_GPREGS_SAVE_AREA+64
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),0(%r14)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r8,%r9,__PT_PSW(%r11)
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
brasl %r14,s390_do_machine_check
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
tm __PT_PSW+1(%r11),0x01 # returning to user ?
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jno .Lmcck_return
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
lg %r1,__LC_KERNEL_STACK # switch to kernel stack
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
lgr %r15,%r1
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
jno .Lmcck_return
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
TRACE_IRQS_OFF
[PATCH] s390: improved machine check handling Improved machine check handling. Kernel is now able to receive machine checks while in kernel mode (system call, interrupt and program check handling). Also register validation is now performed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-26 01:55:30 +04:00
brasl %r14,s390_handle_mcck
[PATCH] lockdep: irqtrace subsystem, s390 support irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 11:24:46 +04:00
TRACE_IRQS_ON
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lmcck_return:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r14,__LC_VDSO_PER_CPU
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
jno 0f
stpt __LC_EXIT_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc __VDSO_ECTG_BASE(16,%r14),__LC_EXIT_TIMER
0: lmg %r11,%r15,__PT_R11(%r11)
lpswe __LC_RETURN_MCCK_PSW
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lmcck_panic:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r15,__LC_PANIC_STACK
s390/nmi: use the normal asynchronous stack for machine checks If a machine checks is received while the CPU is in the kernel, only the s390_do_machine_check function will be called. The call to s390_handle_mcck is postponed until the CPU returns to user space. Because of this it is safe to use the asynchronous stack for machine checks even if the CPU is already handling an interrupt. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:28:14 +03:00
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
j .Lmcck_skip
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[S390] Add PSW restart shutdown trigger With this patch a new S390 shutdown trigger "restart" is added. If under z/VM "systerm restart" is entered or under the HMC the "PSW restart" button is pressed, the PSW located at 0 (31 bit) or 0x1a0 (64 bit) bit is loaded. Now we execute do_restart() that processes the restart action that is defined under /sys/firmware/shutdown_actions/on_restart. Currently the following actions are possible: reipl (default), stop, vmcmd, dump, and dump_reipl. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:19 +04:00
#
# PSW restart interrupt handler
#
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
ENTRY(restart_int_handler)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stg %r15,__LC_SAVE_AREA_RESTART
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
lg %r15,__LC_RESTART_STACK
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
aghi %r15,-__PT_SIZE # create pt_regs on stack
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
xc 0(__PT_SIZE,%r15),0(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r14,__PT_R0(%r15)
mvc __PT_R15(8,%r15),__LC_SAVE_AREA_RESTART
mvc __PT_PSW(16,%r15),__LC_RST_OLD_PSW # store restart old psw
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
aghi %r15,-STACK_FRAME_OVERHEAD # create stack frame on stack
xc 0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
s390/smp: make absolute lowcore / cpu restart parameter accesses more robust Setting the cpu restart parameters is done in three different fashions: - directly setting the four parameters individually - copying the four parameters with memcpy (using 4 * sizeof(long)) - copying the four parameters using a private structure In addition code in entry*.S relies on a certain order of the restart members of struct _lowcore. Make all of this more robust to future changes by adding a mem_absolute_assign(dest, val) define, which assigns val to dest using absolute addressing mode. Also the load multiple instructions in entry*.S have been split into separate load instruction so the order of the struct _lowcore members doesn't matter anymore. In addition move the prototypes of memcpy_real/absolute from uaccess.h to processor.h. These memcpy* variants are not related to uaccess at all. string.h doesn't seem to match as well, so lets use processor.h. Also replace the eight byte array in struct _lowcore which represents a misaliged u64 with a u64. The compiler will always create code that handles the misaligned u64 correctly. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-05 11:59:52 +04:00
lg %r1,__LC_RESTART_FN # load fn, parm & source cpu
lg %r2,__LC_RESTART_DATA
lg %r3,__LC_RESTART_SOURCE
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
ltgr %r3,%r3 # test source cpu address
jm 1f # negative -> skip source stop
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 17:05:43 +04:00
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
brc 10,0b # wait for status stored
1: basr %r14,%r1 # call function
stap __SF_EMPTY(%r15) # store cpu address
llgh %r3,__SF_EMPTY(%r15)
s390/sigp: use sigp order code defines in assembly code Use sigp order code defines in assembly code as well. With this change all places that use sigp constants should have been converted to use self describing defines instead of directly using constants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-06-04 17:05:43 +04:00
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
[S390] rework smp code Define struct pcpu and merge some of the NR_CPUS arrays into it, including __cpu_logical_map, current_set and smp_cpu_state. Split smp related functions to those operating on physical cpus and the functions operating on a logical cpu number. Make the functions for physical cpus use a pointer to a struct pcpu. This hides the knowledge about cpu addresses in smp.c, entry[64].S and swsusp_asm64.S, thus remove the sigp.h header. The PSW restart mechanism is used to start secondary cpus, calling a function on an online cpu, calling a function on the ipl cpu, and for the nmi signal. Replace the different assembler functions with a single function restart_int_handler. The new entry point calls a function whose pointer is stored in the lowcore of the target cpu and it can wait for the source cpu to stop. This covers all existing use cases. Overall the code is now simpler and there are ~380 lines less code. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:26 +04:00
brc 2,2b
3: j 3b
[S390] Add PSW restart shutdown trigger With this patch a new S390 shutdown trigger "restart" is added. If under z/VM "systerm restart" is entered or under the HMC the "PSW restart" button is pressed, the PSW located at 0 (31 bit) or 0x1a0 (64 bit) bit is loaded. Now we execute do_restart() that processes the restart action that is defined under /sys/firmware/shutdown_actions/on_restart. Currently the following actions are possible: reipl (default), stop, vmcmd, dump, and dump_reipl. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2011-08-03 18:44:19 +04:00
[S390] add kprobes annotations Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-05 14:47:25 +03:00
.section .kprobes.text, "ax"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#ifdef CONFIG_CHECK_STACK
/*
* The synchronous or the asynchronous stack overflowed. We are dead.
* No need to properly save the registers, we are going to panic anyway.
* Setup a pt_regs so that show_trace can provide a good call trace.
*/
stack_overflow:
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
lg %r15,__LC_PANIC_STACK # change to panic stack
la %r11,STACK_FRAME_OVERHEAD(%r15)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
stmg %r0,%r7,__PT_R0(%r11)
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_R8(64,%r11),0(%r14)
stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jg kernel_stack_overflow
#endif
cleanup_critical:
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
#if IS_ENABLED(CONFIG_KVM)
clg %r9,BASED(.Lcleanup_table_sie) # .Lsie_gmap
jl 0f
clg %r9,BASED(.Lcleanup_table_sie+8)# .Lsie_done
jl .Lcleanup_sie
#endif
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_table) # system_call
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jl 0f
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_table+8) # .Lsysc_do_svc
jl .Lcleanup_system_call
clg %r9,BASED(.Lcleanup_table+16) # .Lsysc_tif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jl 0f
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_table+24) # .Lsysc_restore
jl .Lcleanup_sysc_tif
clg %r9,BASED(.Lcleanup_table+32) # .Lsysc_done
jl .Lcleanup_sysc_restore
clg %r9,BASED(.Lcleanup_table+40) # .Lio_tif
[S390] virtual cpu accounting vs. machine checks. If a machine checks interrupts the external or the i/o interrupt handler before they have completed the cpu time calculations, the accounting goes wrong. After the cpu returned from the machine check handler to the interrupted interrupt handler, a negative cpu time delta can occur. If the accumulated cpu time in lowcore is small enough this value can get negative as well. The next jiffy interrupt will pick up that negative value, shift it by 12 and add the now huge positive value to the cpu time of the process. To solve this the machine check handler is modified not to change any of the timestamps in the lowcore if the machine check interrupted kernel context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29 16:58:05 +04:00
jl 0f
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_table+48) # .Lio_restore
jl .Lcleanup_io_tif
clg %r9,BASED(.Lcleanup_table+56) # .Lio_done
jl .Lcleanup_io_restore
clg %r9,BASED(.Lcleanup_table+64) # psw_idle
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
jl 0f
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_table+72) # .Lpsw_idle_end
jl .Lcleanup_idle
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
clg %r9,BASED(.Lcleanup_table+80) # save_fpu_regs
jl 0f
clg %r9,BASED(.Lcleanup_table+88) # .Lsave_fpu_regs_end
jl .Lcleanup_save_fpu_regs
clg %r9,BASED(.Lcleanup_table+96) # load_fpu_regs
jl 0f
clg %r9,BASED(.Lcleanup_table+104) # .Lload_fpu_regs_end
jl .Lcleanup_load_fpu_regs
clg %r9,BASED(.Lcleanup_table+112) # __ctl_set_vx
jl 0f
clg %r9,BASED(.Lcleanup_table+120) # .L__ctl_set_vx_end
jl .Lcleanup___ctl_set_vx
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
0: br %r14
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
.align 8
.Lcleanup_table:
.quad system_call
.quad .Lsysc_do_svc
.quad .Lsysc_tif
.quad .Lsysc_restore
.quad .Lsysc_done
.quad .Lio_tif
.quad .Lio_restore
.quad .Lio_done
.quad psw_idle
.quad .Lpsw_idle_end
.quad save_fpu_regs
.quad .Lsave_fpu_regs_end
.quad load_fpu_regs
.quad .Lload_fpu_regs_end
.quad __ctl_set_vx
.quad .L__ctl_set_vx_end
#if IS_ENABLED(CONFIG_KVM)
.Lcleanup_table_sie:
.quad .Lsie_gmap
.quad .Lsie_done
.Lcleanup_sie:
lg %r9,__SF_EMPTY(%r15) # get control block pointer
tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP
jz 0f
.insn s,0xb2800000,__SF_EMPTY+16(%r15)# set host id
0: ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
larl %r9,sie_exit # skip forward to sie_exit
br %r14
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_system_call:
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
# check if stpt has been executed
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_system_call_insn)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jh 0f
mvc __LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
cghi %r11,__LC_SAVE_AREA_ASYNC
[S390] idle time accounting vs. machine checks A machine check can interrupt the i/o and external interrupt handler anytime. If the machine check occurs while the interrupt handler is waking up from idle vtime_start_cpu can get executed a second time and the int_clock / async_enter_timer values in the lowcore get clobbered. This can confuse the cpu time accounting. To fix this problem two changes are needed. First the machine check handler has to use its own copies of int_clock and async_enter_timer, named mcck_clock and mcck_enter_timer. Second the nested execution of vtime_start_cpu has to be prevented. This is done in s390_idle_check by checking the wait bit in the program status word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:03 +04:00
je 0f
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc __LC_SYNC_ENTER_TIMER(8),__LC_MCCK_ENTER_TIMER
0: # check if stmg has been executed
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_system_call_insn+8)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
jh 0f
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc __LC_SAVE_AREA_SYNC(64),0(%r11)
0: # check if base register setup + TIF bit load has been done
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_system_call_insn+16)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jhe 0f
# set up saved registers r10 and r12
stg %r10,16(%r11) # r10 last break
stg %r12,32(%r11) # r12 thread-info pointer
0: # check if the user time update has been done
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_system_call_insn+24)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jh 0f
lg %r15,__LC_EXIT_TIMER
slg %r15,__LC_SYNC_ENTER_TIMER
alg %r15,__LC_USER_TIMER
stg %r15,__LC_USER_TIMER
0: # check if the system time update has been done
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_system_call_insn+32)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
jh 0f
lg %r15,__LC_LAST_UPDATE_TIMER
slg %r15,__LC_EXIT_TIMER
alg %r15,__LC_SYSTEM_TIMER
stg %r15,__LC_SYSTEM_TIMER
0: # update accounting time stamp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
# do LAST_BREAK
lg %r9,16(%r11)
srag %r9,%r9,23
[S390] add breaking event address for user space Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:05 +04:00
jz 0f
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
mvc __TI_last_break(8,%r12),16(%r11)
0: # set up saved register r11
lg %r15,__LC_KERNEL_STACK
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
la %r9,STACK_FRAME_OVERHEAD(%r15)
stg %r9,24(%r11) # r11 pt_regs pointer
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
# fill pt_regs
s390: lowcore stack pointer offsets Store the stack pointers in the lowcore for the kernel stack, the async stack and the panic stack with the offset required for the first user. This avoids an unnecessary add instruction on the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 12:20:43 +04:00
mvc __PT_R8(64,%r9),__LC_SAVE_AREA_SYNC
stmg %r0,%r7,__PT_R0(%r9)
mvc __PT_PSW(16,%r9),__LC_SVC_OLD_PSW
mvc __PT_INT_CODE(4,%r9),__LC_SVC_ILC
s390: split TIF bits into CIF, PIF and TIF bits The oi and ni instructions used in entry[64].S to set and clear bits in the thread-flags are not guaranteed to be atomic in regard to other CPUs. Split the TIF bits into CPU, pt_regs and thread-info specific bits. Updates on the TIF bits are done with atomic instructions, updates on CPU and pt_regs bits are done with non-atomic instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-15 14:55:07 +04:00
xc __PT_FLAGS(8,%r9),__PT_FLAGS(%r9)
mvi __PT_FLAGS+7(%r9),_PIF_SYSCALL
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
# setup saved register r15
stg %r15,56(%r11) # r15 stack pointer
# set new psw address and exit
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
larl %r9,.Lsysc_do_svc
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_system_call_insn:
[S390] Whitespace cleanup. Huge s390 assembly files whitespace cleanup. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28 18:56:37 +04:00
.quad system_call
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.quad .Lsysc_stmg
.quad .Lsysc_per
s390/kernel: squeeze a few more cycles out of the system call handler Reorder the instructions of UPDATE_VTIME to improve superscalar execution, remove duplicate checks for problem-state from the asynchronous interrupt handlers, and move the check for problem-state from the synchronous exit path to the program check path as it is only needed for program checks inside the kernel. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:27:48 +03:00
.quad .Lsysc_vtime+36
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.quad .Lsysc_vtime+42
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_sysc_tif:
larl %r9,.Lsysc_tif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_sysc_restore:
clg %r9,BASED(.Lcleanup_sysc_restore_insn)
[S390] idle time accounting vs. machine checks A machine check can interrupt the i/o and external interrupt handler anytime. If the machine check occurs while the interrupt handler is waking up from idle vtime_start_cpu can get executed a second time and the int_clock / async_enter_timer values in the lowcore get clobbered. This can confuse the cpu time accounting. To fix this problem two changes are needed. First the machine check handler has to use its own copies of int_clock and async_enter_timer, named mcck_clock and mcck_enter_timer. Second the nested execution of vtime_start_cpu has to be prevented. This is done in s390_idle_check by checking the wait bit in the program status word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-05-17 12:00:03 +04:00
je 0f
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
lg %r9,24(%r11) # get saved pointer to pt_regs
mvc __LC_RETURN_PSW(16),__PT_PSW(%r9)
mvc 0(64,%r11),__PT_R8(%r9)
lmg %r0,%r7,__PT_R0(%r9)
0: lmg %r8,%r9,__LC_RETURN_PSW
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_sysc_restore_insn:
.quad .Lsysc_done - 4
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_io_tif:
larl %r9,.Lio_tif
[S390] fix io_return critical section cleanup If a machine check interrupts the io interrupt handler on one of the instructions between io_return and io_leave the critical section cleanup code will move the return psw to io_work_loop. By doing that the switch from the asynchronous interrupt stack to the process stack is skipped. If e.g. TIF_NEED_RESCHED is set things break because the scheduler is called with the asynchronous interrupts stack. Moving the psw back to io_return instead fixes the problem. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 15:43:00 +04:00
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_io_restore:
clg %r9,BASED(.Lcleanup_io_restore_insn)
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
je 0f
lg %r9,24(%r11) # get saved r11 pointer to pt_regs
mvc __LC_RETURN_PSW(16),__PT_PSW(%r9)
mvc 0(64,%r11),__PT_R8(%r9)
lmg %r0,%r7,__PT_R0(%r9)
0: lmg %r8,%r9,__LC_RETURN_PSW
[PATCH] s390: machine check handler bugs The new machine check handler still has a few bugs. 1) The system entry time has to be stored in the machine check handler, 2) the machine check return psw may not be stored at the usual place because it might overwrite the return psw of the interrupted context, 3) the return address for the call to s390_handle_mcck in the i/o interrupt handler is not correct, 4) the system call cleanup has to take the different save area of the machine check handler into account, 5) the machine check handler may not call UPDATE_VTIME before CREATE_STACK_FRAME, and 6) the io leave path needs a critical section cleanup to make sure that the TIF_MCCK_PENDING bit is really checked before switching back to user space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 02:57:56 +04:00
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_io_restore_insn:
.quad .Lio_done - 4
[PATCH] s390: machine check handler bugs The new machine check handler still has a few bugs. 1) The system entry time has to be stored in the machine check handler, 2) the machine check return psw may not be stored at the usual place because it might overwrite the return psw of the interrupted context, 3) the return address for the call to s390_handle_mcck in the i/o interrupt handler is not correct, 4) the system call cleanup has to take the different save area of the machine check handler into account, 5) the machine check handler may not call UPDATE_VTIME before CREATE_STACK_FRAME, and 6) the io leave path needs a critical section cleanup to make sure that the TIF_MCCK_PENDING bit is really checked before switching back to user space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-04 02:57:56 +04:00
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_idle:
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
# copy interrupt clock & cpu timer
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
mvc __CLOCK_IDLE_EXIT(8,%r2),__LC_INT_CLOCK
mvc __TIMER_IDLE_EXIT(8,%r2),__LC_ASYNC_ENTER_TIMER
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
cghi %r11,__LC_SAVE_AREA_ASYNC
je 0f
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
mvc __CLOCK_IDLE_EXIT(8,%r2),__LC_MCCK_CLOCK
mvc __TIMER_IDLE_EXIT(8,%r2),__LC_MCCK_ENTER_TIMER
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
0: # check if stck & stpt have been executed
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
clg %r9,BASED(.Lcleanup_idle_insn)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
jhe 1f
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
mvc __CLOCK_IDLE_ENTER(8,%r2),__CLOCK_IDLE_EXIT(%r2)
mvc __TIMER_IDLE_ENTER(8,%r2),__TIMER_IDLE_EXIT(%r2)
1: # account system time going idle
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
lg %r9,__LC_STEAL_TIMER
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
alg %r9,__CLOCK_IDLE_ENTER(%r2)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
slg %r9,__LC_LAST_UPDATE_CLOCK
stg %r9,__LC_STEAL_TIMER
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
mvc __LC_LAST_UPDATE_CLOCK(8),__CLOCK_IDLE_EXIT(%r2)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
lg %r9,__LC_SYSTEM_TIMER
alg %r9,__LC_LAST_UPDATE_TIMER
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
slg %r9,__TIMER_IDLE_ENTER(%r2)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
stg %r9,__LC_SYSTEM_TIMER
s390/vtimer: rework virtual timer interface The current virtual timer interface is inherently per-cpu and hard to use. The sole user of the interface is appldata which uses it to execute a function after a specific amount of cputime has been used over all cpus. Rework the virtual timer interface to hook into the cputime accounting. This makes the interface independent from the CPU timer interrupts, and makes the virtual timers global as opposed to per-cpu. Overall the code is greatly simplified. The downside is that the accuracy is not as good as the original implementation, but it is still good enough for appldata. Reviewed-by: Jan Glauber <jang@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-20 13:15:08 +04:00
mvc __LC_LAST_UPDATE_TIMER(8),__TIMER_IDLE_EXIT(%r2)
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
# prepare return psw
s390/time: return with irqs disabled from psw_idle Modify the psw_idle waiting logic in entry[64].S to return with interrupts disabled. This avoids potential issues with udelay and interrupt loops as interrupts are not reenabled after clock comparator interrupts. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-23 16:45:58 +04:00
nihh %r8,0xfcfd # clear irq & wait state bits
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
lg %r9,48(%r11) # return from psw_idle
br %r14
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.Lcleanup_idle_insn:
.quad .Lpsw_idle_lpsw
[S390] rework idle code Whenever the cpu loads an enabled wait PSW it will appear as idle to the underlying host system. The code in default_idle calls vtime_stop_cpu which does the necessary voodoo to get the cpu time accounting right. The udelay code just loads an enabled wait PSW. To correct this rework the vtime_stop_cpu/vtime_start_cpu logic and move the difficult parts to entry[64].S, vtime_stop_cpu can now be called from anywhere and vtime_start_cpu is gone. The correction of the cpu time during wakeup from an enabled wait PSW is done with a critical section in entry[64].S. As vtime_start_cpu is gone, s390_idle_check can be removed as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-03-11 19:59:27 +04:00
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
.Lcleanup_save_fpu_regs:
tm __LC_CPU_FLAGS+7,_CIF_FPU
bor %r14
clg %r9,BASED(.Lcleanup_save_fpu_regs_done)
jhe 5f
clg %r9,BASED(.Lcleanup_save_fpu_regs_fp)
jhe 4f
clg %r9,BASED(.Lcleanup_save_fpu_regs_vx_high)
jhe 3f
clg %r9,BASED(.Lcleanup_save_fpu_regs_vx_low)
jhe 2f
clg %r9,BASED(.Lcleanup_save_fpu_fpc_end)
jhe 1f
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lg %r2,__LC_CURRENT
s390: fix floating point register corruption The critical section cleanup code misses to add the offset of the thread_struct to the task address. Therefore, if the critical section code gets executed, it may corrupt the task struct or restore the contents of the floating point registers from the wrong memory location. Fixes d0164ee20d "s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-09 14:15:00 +03:00
aghi %r2,__TASK_thread
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
0: # Store floating-point controls
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
stfpc __THREAD_FPU_fpc(%r2)
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
1: # Load register save area and check if VX is active
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lg %r3,__THREAD_FPU_regs(%r2)
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
ltgr %r3,%r3
jz 5f # no save area -> set CIF_FPU
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
tm __THREAD_FPU_flags+3(%r2),FPU_USE_VX
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
jz 4f # no VX -> store FP regs
2: # Store vector registers (V0-V15)
VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3)
3: # Store vector registers (V16-V31)
VSTM %v16,%v31,256,%r3 # vstm 16,31,256(3)
j 5f # -> done, set CIF_FPU flag
4: # Store floating-point registers
std 0,0(%r3)
std 1,8(%r3)
std 2,16(%r3)
std 3,24(%r3)
std 4,32(%r3)
std 5,40(%r3)
std 6,48(%r3)
std 7,56(%r3)
std 8,64(%r3)
std 9,72(%r3)
std 10,80(%r3)
std 11,88(%r3)
std 12,96(%r3)
std 13,104(%r3)
std 14,112(%r3)
std 15,120(%r3)
5: # Set CIF_FPU flag
oi __LC_CPU_FLAGS+7,_CIF_FPU
lg %r9,48(%r11) # return from save_fpu_regs
br %r14
.Lcleanup_save_fpu_fpc_end:
.quad .Lsave_fpu_regs_fpc_end
.Lcleanup_save_fpu_regs_vx_low:
.quad .Lsave_fpu_regs_vx_low
.Lcleanup_save_fpu_regs_vx_high:
.quad .Lsave_fpu_regs_vx_high
.Lcleanup_save_fpu_regs_fp:
.quad .Lsave_fpu_regs_fp
.Lcleanup_save_fpu_regs_done:
.quad .Lsave_fpu_regs_done
.Lcleanup_load_fpu_regs:
tm __LC_CPU_FLAGS+7,_CIF_FPU
bnor %r14
clg %r9,BASED(.Lcleanup_load_fpu_regs_done)
jhe 1f
clg %r9,BASED(.Lcleanup_load_fpu_regs_fp)
jhe 2f
clg %r9,BASED(.Lcleanup_load_fpu_regs_fp_ctl)
jhe 3f
clg %r9,BASED(.Lcleanup_load_fpu_regs_vx_high)
jhe 4f
clg %r9,BASED(.Lcleanup_load_fpu_regs_vx)
jhe 5f
clg %r9,BASED(.Lcleanup_load_fpu_regs_vx_ctl)
jhe 6f
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lg %r4,__LC_CURRENT
s390: fix floating point register corruption The critical section cleanup code misses to add the offset of the thread_struct to the task address. Therefore, if the critical section code gets executed, it may corrupt the task struct or restore the contents of the floating point registers from the wrong memory location. Fixes d0164ee20d "s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-09-09 14:15:00 +03:00
aghi %r4,__TASK_thread
s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead All calls to save_fpu_regs() specify the fpu structure of the current task pointer as parameter. The task pointer of the current task can also be retrieved from the CPU lowcore directly. Remove the parameter definition, load the __LC_CURRENT task pointer from the CPU lowcore, and rebase the FPU structure onto the task structure. Apply the same approach for the load_fpu_regs() function. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-29 17:43:06 +03:00
lfpc __THREAD_FPU_fpc(%r4)
tm __THREAD_FPU_flags+3(%r4),FPU_USE_VX # VX-enabled task ?
lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area
s390/kernel: lazy restore fpu registers Improve the save and restore behavior of FPU register contents to use the vector extension within the kernel. The kernel does not use floating-point or vector registers and, therefore, saving and restoring the FPU register contents are performed for handling signals or switching processes only. To prepare for using vector instructions and vector registers within the kernel, enhance the save behavior and implement a lazy restore at return to user space from a system call or interrupt. To implement the lazy restore, the save_fpu_regs() sets a CPU information flag, CIF_FPU, to indicate that the FPU registers must be restored. Saving and setting CIF_FPU is performed in an atomic fashion to be interrupt-safe. When the kernel wants to use the vector extension or wants to change the FPU register state for a task during signal handling, the save_fpu_regs() must be called first. The CIF_FPU flag is also set at process switch. At return to user space, the FPU state is restored. In particular, the FPU state includes the floating-point or vector register contents, as well as, vector-enablement and floating-point control. The FPU state restore and clearing CIF_FPU is also performed in an atomic fashion. For KVM, the restore of the FPU register state is performed when restoring the general-purpose guest registers before the SIE instructions is started. Because the path towards the SIE instruction is interruptible, the CIF_FPU flag must be checked again right before going into SIE. If set, the guest registers must be reloaded again by re-entering the outer SIE loop. This is the same behavior as if the SIE critical section is interrupted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-10 13:53:42 +03:00
jz 3f # -> no VX, load FP regs
6: # Set VX-enablement control
stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0
tm __SF_EMPTY+32+5(%r15),2 # test VX control
jo 5f
oi __SF_EMPTY+32+5(%r15),2 # set VX control
lctlg %c0,%c0,__SF_EMPTY+32(%r15)
5: # Load V0 ..V15 registers
VLM %v0,%v15,0,%r4
4: # Load V16..V31 registers
VLM %v16,%v31,256,%r4
j 1f
3: # Clear VX-enablement control for FP
stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0
tm __SF_EMPTY+32+5(%r15),2 # test VX control
jz 2f
ni __SF_EMPTY+32+5(%r15),253 # clear VX control
lctlg %c0,%c0,__SF_EMPTY+32(%r15)
2: # Load floating-point registers
ld 0,0(%r4)
ld 1,8(%r4)
ld 2,16(%r4)
ld 3,24(%r4)
ld 4,32(%r4)
ld 5,40(%r4)
ld 6,48(%r4)
ld 7,56(%r4)
ld 8,64(%r4)
ld 9,72(%r4)
ld 10,80(%r4)
ld 11,88(%r4)
ld 12,96(%r4)
ld 13,104(%r4)
ld 14,112(%r4)
ld 15,120(%r4)
1: # Clear CIF_FPU bit
ni __LC_CPU_FLAGS+7,255-_CIF_FPU
lg %r9,48(%r11) # return from load_fpu_regs
br %r14
.Lcleanup_load_fpu_regs_vx_ctl:
.quad .Lload_fpu_regs_vx_ctl
.Lcleanup_load_fpu_regs_vx:
.quad .Lload_fpu_regs_vx
.Lcleanup_load_fpu_regs_vx_high:
.quad .Lload_fpu_regs_vx_high
.Lcleanup_load_fpu_regs_fp_ctl:
.quad .Lload_fpu_regs_fp_ctl
.Lcleanup_load_fpu_regs_fp:
.quad .Lload_fpu_regs_fp
.Lcleanup_load_fpu_regs_done:
.quad .Lload_fpu_regs_done
.Lcleanup___ctl_set_vx:
stctg %c0,%c0,__SF_EMPTY(%r15)
tm __SF_EMPTY+5(%r15),2
bor %r14
oi __SF_EMPTY+5(%r15),2
lctlg %c0,%c0,__SF_EMPTY(%r15)
lg %r9,48(%r11) # return from __ctl_set_vx
br %r14
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
* Integer constants
*/
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
.align 8
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
.Lcritical_start:
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.quad .L__critical_start
[S390] entry[64].S improvements Another round of cleanup for entry[64].S, in particular the program check handler looks more reasonable now. The code size for the 31 bit kernel has been reduced by 616 byte and by 528 byte for the 64 bit version. Even better the code is a bit faster as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-27 14:27:15 +04:00
.Lcritical_length:
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.quad .L__critical_end - .L__critical_start
s390: use IS_ENABLED to check if a CONFIG is set to y or m This is shorter and should be used instead of the longer form which checks for both possible config options. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-11-01 13:08:20 +04:00
#if IS_ENABLED(CONFIG_KVM)
s390/kvm: integrate HANDLE_SIE_INTERCEPT into cleanup_critical Currently there are two mechanisms to deal with cleanup work due to interrupts. The HANDLE_SIE_INTERCEPT macro is used to undo the changes required to enter SIE in sie64a. If the SIE instruction causes a program check, or an asynchronous interrupt is received the HANDLE_SIE_INTERCEPT code forwards the program execution to sie_exit. All the other critical sections in entry.S are handled by the code in cleanup_critical that is called by the SWITCH_ASYNC macro. Move the sie64a function to the beginning of the critical section and add the code from HANDLE_SIE_INTERCEPT to cleanup_critical. Add a special case for the sie64a cleanup to the program check handler. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-06-22 18:26:40 +03:00
.Lsie_critical_start:
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.quad .Lsie_gmap
s390/kvm: avoid automatic sie reentry Do not automatically restart the sie instruction in entry64.S after an interrupt, return to the caller with a reason code instead. That allows to deal with RCU and other conditions in C code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-05-17 16:41:37 +04:00
.Lsie_critical_length:
s390: use local symbol names in entry[64].S To improve the output of the perf tool hide most of the symbols from entry[64].S by using the '.L' prefix. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-12-03 19:00:08 +03:00
.quad .Lsie_done - .Lsie_gmap
[S390] move sie code to entry.S The entry to / exit from sie has subtle dependencies to the first level interrupt handler. Move the sie assembler code to entry64.S and replace the SIE_HOOK callback with a test and the new _TIF_SIE bit. In addition this patch fixes several problems in regard to the check for the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing the interrupt handler and it only modified the instruction address if it pointed directly to the sie instruction. In both cases it could miss a TIF bit that normally would cause an exit from the guest and would reenter the guest context. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24 12:48:18 +04:00
#endif
s390: remove 31 bit syscalls Remove the 31 bit syscalls from the syscall table. This is a separate patch just in case I screwed something up so it can be easily reverted. However the conversion was done with a script, so everything should be ok. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-13 16:44:29 +03:00
.section .rodata, "a"
#define SYSCALL(esame,emu) .long esame
[S390] ftrace: add system call tracer support System call tracer support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-12 12:26:47 +04:00
.globl sys_call_table
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
sys_call_table:
#include "syscalls.S"
#undef SYSCALL
[PATCH] s390: cleanup Kconfig Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 11:19:28 +03:00
#ifdef CONFIG_COMPAT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
s390: remove 31 bit syscalls Remove the 31 bit syscalls from the syscall table. This is a separate patch just in case I screwed something up so it can be easily reverted. However the conversion was done with a script, so everything should be ok. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-02-13 16:44:29 +03:00
#define SYSCALL(esame,emu) .long emu
s390: system call path micro optimization Add a pointer to the system call table to the thread_info structure. The TIF_31BIT bit is set or cleared by SET_PERSONALITY exactly once for the lifetime of a process. With the pointer to the correct system call table in thread_info the system call code in entry64.S path can drop the check for TIF_31BIT which saves a couple of instructions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-04-24 14:58:39 +04:00
.globl sys_call_table_emu
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
sys_call_table_emu:
#include "syscalls.S"
#undef SYSCALL
#endif