2010-07-03 08:06:57 +04:00
|
|
|
/*
|
|
|
|
* LIRC base driver
|
|
|
|
*
|
|
|
|
* by Artur Lipowski <alipowski@interia.pl>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2016-07-06 12:01:16 +03:00
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
|
2010-07-03 08:06:57 +04:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/device.h>
|
2017-06-25 15:32:05 +03:00
|
|
|
#include <linux/idr.h>
|
2017-09-26 16:34:47 +03:00
|
|
|
#include <linux/poll.h>
|
2017-11-02 23:39:16 +03:00
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/wait.h>
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-23 17:41:13 +03:00
|
|
|
#include "rc-core-priv.h"
|
2017-11-02 23:44:21 +03:00
|
|
|
#include <uapi/linux/lirc.h>
|
2010-07-03 08:06:57 +04:00
|
|
|
|
|
|
|
#define LOGHEAD "lirc_dev (%s[%d]): "
|
2017-11-02 23:39:16 +03:00
|
|
|
#define LIRCBUF_SIZE 256
|
2010-07-03 08:06:57 +04:00
|
|
|
|
|
|
|
static dev_t lirc_base_dev;
|
|
|
|
|
2017-06-25 15:32:05 +03:00
|
|
|
/* Used to keep track of allocated lirc devices */
|
|
|
|
static DEFINE_IDA(lirc_ida);
|
2010-07-03 08:06:57 +04:00
|
|
|
|
|
|
|
/* Only used for sysfs but defined to void otherwise */
|
|
|
|
static struct class *lirc_class;
|
|
|
|
|
2017-11-02 23:39:16 +03:00
|
|
|
/**
|
|
|
|
* ir_lirc_raw_event() - Send raw IR data to lirc to be relayed to userspace
|
|
|
|
*
|
|
|
|
* @dev: the struct rc_dev descriptor of the device
|
|
|
|
* @ev: the struct ir_raw_event descriptor of the pulse/space
|
|
|
|
*/
|
|
|
|
void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
|
|
|
|
{
|
|
|
|
int sample;
|
|
|
|
|
|
|
|
/* Packet start */
|
|
|
|
if (ev.reset) {
|
|
|
|
/*
|
|
|
|
* Userspace expects a long space event before the start of
|
|
|
|
* the signal to use as a sync. This may be done with repeat
|
|
|
|
* packets and normal samples. But if a reset has been sent
|
|
|
|
* then we assume that a long time has passed, so we send a
|
|
|
|
* space with the maximum time value.
|
|
|
|
*/
|
|
|
|
sample = LIRC_SPACE(LIRC_VALUE_MASK);
|
|
|
|
IR_dprintk(2, "delivering reset sync space to lirc_dev\n");
|
|
|
|
|
|
|
|
/* Carrier reports */
|
|
|
|
} else if (ev.carrier_report) {
|
|
|
|
sample = LIRC_FREQUENCY(ev.carrier);
|
|
|
|
IR_dprintk(2, "carrier report (freq: %d)\n", sample);
|
|
|
|
|
|
|
|
/* Packet end */
|
|
|
|
} else if (ev.timeout) {
|
|
|
|
if (dev->gap)
|
|
|
|
return;
|
|
|
|
|
|
|
|
dev->gap_start = ktime_get();
|
|
|
|
dev->gap = true;
|
|
|
|
dev->gap_duration = ev.duration;
|
|
|
|
|
|
|
|
if (!dev->send_timeout_reports)
|
|
|
|
return;
|
|
|
|
|
|
|
|
sample = LIRC_TIMEOUT(ev.duration / 1000);
|
|
|
|
IR_dprintk(2, "timeout report (duration: %d)\n", sample);
|
|
|
|
|
|
|
|
/* Normal sample */
|
|
|
|
} else {
|
|
|
|
if (dev->gap) {
|
|
|
|
dev->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
|
|
|
|
dev->gap_start));
|
|
|
|
|
|
|
|
/* Convert to ms and cap by LIRC_VALUE_MASK */
|
|
|
|
do_div(dev->gap_duration, 1000);
|
|
|
|
dev->gap_duration = min_t(u64, dev->gap_duration,
|
|
|
|
LIRC_VALUE_MASK);
|
|
|
|
|
|
|
|
kfifo_put(&dev->rawir, LIRC_SPACE(dev->gap_duration));
|
|
|
|
dev->gap = false;
|
|
|
|
}
|
|
|
|
|
|
|
|
sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
|
|
|
|
LIRC_SPACE(ev.duration / 1000);
|
|
|
|
IR_dprintk(2, "delivering %uus %s to lirc_dev\n",
|
|
|
|
TO_US(ev.duration), TO_STR(ev.pulse));
|
|
|
|
}
|
|
|
|
|
|
|
|
kfifo_put(&dev->rawir, sample);
|
|
|
|
wake_up_poll(&dev->wait_poll, POLLIN | POLLRDNORM);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* ir_lirc_scancode_event() - Send scancode data to lirc to be relayed to
|
|
|
|
* userspace
|
|
|
|
* @dev: the struct rc_dev descriptor of the device
|
|
|
|
* @lsc: the struct lirc_scancode describing the decoded scancode
|
|
|
|
*/
|
|
|
|
void ir_lirc_scancode_event(struct rc_dev *dev, struct lirc_scancode *lsc)
|
|
|
|
{
|
|
|
|
lsc->timestamp = ktime_get_ns();
|
|
|
|
|
|
|
|
if (kfifo_put(&dev->scancodes, *lsc))
|
|
|
|
wake_up_poll(&dev->wait_poll, POLLIN | POLLRDNORM);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ir_lirc_scancode_event);
|
|
|
|
|
|
|
|
static int ir_lirc_open(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct rc_dev *dev = container_of(inode->i_cdev, struct rc_dev,
|
|
|
|
lirc_cdev);
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
retval = rc_open(dev);
|
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
|
|
|
|
retval = mutex_lock_interruptible(&dev->lock);
|
|
|
|
if (retval)
|
|
|
|
goto out_rc;
|
|
|
|
|
|
|
|
if (!dev->registered) {
|
|
|
|
retval = -ENODEV;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->lirc_open) {
|
|
|
|
retval = -EBUSY;
|
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->driver_type == RC_DRIVER_IR_RAW)
|
|
|
|
kfifo_reset_out(&dev->rawir);
|
|
|
|
if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
|
|
|
|
kfifo_reset_out(&dev->scancodes);
|
|
|
|
|
|
|
|
dev->lirc_open++;
|
|
|
|
file->private_data = dev;
|
|
|
|
|
|
|
|
nonseekable_open(inode, file);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
out_rc:
|
|
|
|
rc_close(dev);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ir_lirc_close(struct inode *inode, struct file *file)
|
|
|
|
{
|
|
|
|
struct rc_dev *dev = file->private_data;
|
|
|
|
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
dev->lirc_open--;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
|
|
|
|
rc_close(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
|
|
|
|
size_t n, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct rc_dev *dev = file->private_data;
|
|
|
|
unsigned int *txbuf = NULL;
|
|
|
|
struct ir_raw_event *raw = NULL;
|
|
|
|
ssize_t ret = -EINVAL;
|
|
|
|
size_t count;
|
|
|
|
ktime_t start;
|
|
|
|
s64 towait;
|
|
|
|
unsigned int duration = 0; /* signal duration in us */
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!dev->registered)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
start = ktime_get();
|
|
|
|
|
|
|
|
if (!dev->tx_ir) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->send_mode == LIRC_MODE_SCANCODE) {
|
|
|
|
struct lirc_scancode scan;
|
|
|
|
|
|
|
|
if (n != sizeof(scan))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (copy_from_user(&scan, buf, sizeof(scan)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
if (scan.flags || scan.keycode || scan.timestamp)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The scancode field in lirc_scancode is 64-bit simply
|
|
|
|
* to future-proof it, since there are IR protocols encode
|
|
|
|
* use more than 32 bits. For now only 32-bit protocols
|
|
|
|
* are supported.
|
|
|
|
*/
|
|
|
|
if (scan.scancode > U32_MAX ||
|
|
|
|
!rc_validate_scancode(scan.rc_proto, scan.scancode))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
raw = kmalloc_array(LIRCBUF_SIZE, sizeof(*raw), GFP_KERNEL);
|
|
|
|
if (!raw)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
ret = ir_raw_encode_scancode(scan.rc_proto, scan.scancode,
|
|
|
|
raw, LIRCBUF_SIZE);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
count = ret;
|
|
|
|
|
|
|
|
txbuf = kmalloc_array(count, sizeof(unsigned int), GFP_KERNEL);
|
|
|
|
if (!txbuf) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < count; i++)
|
|
|
|
/* Convert from NS to US */
|
|
|
|
txbuf[i] = DIV_ROUND_UP(raw[i].duration, 1000);
|
|
|
|
|
|
|
|
if (dev->s_tx_carrier) {
|
|
|
|
int carrier = ir_raw_encode_carrier(scan.rc_proto);
|
|
|
|
|
|
|
|
if (carrier > 0)
|
|
|
|
dev->s_tx_carrier(dev, carrier);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (n < sizeof(unsigned int) || n % sizeof(unsigned int))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
count = n / sizeof(unsigned int);
|
|
|
|
if (count > LIRCBUF_SIZE || count % 2 == 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
txbuf = memdup_user(buf, n);
|
|
|
|
if (IS_ERR(txbuf))
|
|
|
|
return PTR_ERR(txbuf);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < count; i++) {
|
|
|
|
if (txbuf[i] > IR_MAX_DURATION / 1000 - duration || !txbuf[i]) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
duration += txbuf[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = dev->tx_ir(dev, txbuf, count);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (dev->send_mode == LIRC_MODE_SCANCODE) {
|
|
|
|
ret = n;
|
|
|
|
} else {
|
|
|
|
for (duration = i = 0; i < ret; i++)
|
|
|
|
duration += txbuf[i];
|
|
|
|
|
|
|
|
ret *= sizeof(unsigned int);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The lircd gap calculation expects the write function to
|
|
|
|
* wait for the actual IR signal to be transmitted before
|
|
|
|
* returning.
|
|
|
|
*/
|
|
|
|
towait = ktime_us_delta(ktime_add_us(start, duration),
|
|
|
|
ktime_get());
|
|
|
|
if (towait > 0) {
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
schedule_timeout(usecs_to_jiffies(towait));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
kfree(txbuf);
|
|
|
|
kfree(raw);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
|
|
|
|
unsigned long arg)
|
|
|
|
{
|
|
|
|
struct rc_dev *dev = filep->private_data;
|
|
|
|
u32 __user *argp = (u32 __user *)(arg);
|
|
|
|
int ret = 0;
|
|
|
|
__u32 val = 0, tmp;
|
|
|
|
|
|
|
|
if (_IOC_DIR(cmd) & _IOC_WRITE) {
|
|
|
|
ret = get_user(val, argp);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!dev->registered)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case LIRC_GET_FEATURES:
|
|
|
|
if (dev->driver_type == RC_DRIVER_SCANCODE)
|
|
|
|
val |= LIRC_CAN_REC_SCANCODE;
|
|
|
|
|
|
|
|
if (dev->driver_type == RC_DRIVER_IR_RAW) {
|
|
|
|
val |= LIRC_CAN_REC_MODE2 | LIRC_CAN_REC_SCANCODE;
|
|
|
|
if (dev->rx_resolution)
|
|
|
|
val |= LIRC_CAN_GET_REC_RESOLUTION;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->tx_ir) {
|
|
|
|
val |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE;
|
|
|
|
if (dev->s_tx_mask)
|
|
|
|
val |= LIRC_CAN_SET_TRANSMITTER_MASK;
|
|
|
|
if (dev->s_tx_carrier)
|
|
|
|
val |= LIRC_CAN_SET_SEND_CARRIER;
|
|
|
|
if (dev->s_tx_duty_cycle)
|
|
|
|
val |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->s_rx_carrier_range)
|
|
|
|
val |= LIRC_CAN_SET_REC_CARRIER |
|
|
|
|
LIRC_CAN_SET_REC_CARRIER_RANGE;
|
|
|
|
|
|
|
|
if (dev->s_learning_mode)
|
|
|
|
val |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
|
|
|
|
|
|
|
|
if (dev->s_carrier_report)
|
|
|
|
val |= LIRC_CAN_MEASURE_CARRIER;
|
|
|
|
|
|
|
|
if (dev->max_timeout)
|
|
|
|
val |= LIRC_CAN_SET_REC_TIMEOUT;
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* mode support */
|
|
|
|
case LIRC_GET_REC_MODE:
|
|
|
|
if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
val = dev->rec_mode;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LIRC_SET_REC_MODE:
|
|
|
|
switch (dev->driver_type) {
|
|
|
|
case RC_DRIVER_IR_RAW_TX:
|
|
|
|
return -ENOTTY;
|
|
|
|
case RC_DRIVER_SCANCODE:
|
|
|
|
if (val != LIRC_MODE_SCANCODE)
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
case RC_DRIVER_IR_RAW:
|
|
|
|
if (!(val == LIRC_MODE_MODE2 ||
|
|
|
|
val == LIRC_MODE_SCANCODE))
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->rec_mode = val;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
case LIRC_GET_SEND_MODE:
|
|
|
|
if (!dev->tx_ir)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
val = dev->send_mode;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LIRC_SET_SEND_MODE:
|
|
|
|
if (!dev->tx_ir)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
if (!(val == LIRC_MODE_PULSE || val == LIRC_MODE_SCANCODE))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
dev->send_mode = val;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* TX settings */
|
|
|
|
case LIRC_SET_TRANSMITTER_MASK:
|
|
|
|
if (!dev->s_tx_mask)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
return dev->s_tx_mask(dev, val);
|
|
|
|
|
|
|
|
case LIRC_SET_SEND_CARRIER:
|
|
|
|
if (!dev->s_tx_carrier)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
return dev->s_tx_carrier(dev, val);
|
|
|
|
|
|
|
|
case LIRC_SET_SEND_DUTY_CYCLE:
|
|
|
|
if (!dev->s_tx_duty_cycle)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
if (val <= 0 || val >= 100)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return dev->s_tx_duty_cycle(dev, val);
|
|
|
|
|
|
|
|
/* RX settings */
|
|
|
|
case LIRC_SET_REC_CARRIER:
|
|
|
|
if (!dev->s_rx_carrier_range)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
if (val <= 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return dev->s_rx_carrier_range(dev,
|
|
|
|
dev->carrier_low,
|
|
|
|
val);
|
|
|
|
|
|
|
|
case LIRC_SET_REC_CARRIER_RANGE:
|
|
|
|
if (!dev->s_rx_carrier_range)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
if (val <= 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
dev->carrier_low = val;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
case LIRC_GET_REC_RESOLUTION:
|
|
|
|
if (!dev->rx_resolution)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
val = dev->rx_resolution / 1000;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LIRC_SET_WIDEBAND_RECEIVER:
|
|
|
|
if (!dev->s_learning_mode)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
return dev->s_learning_mode(dev, !!val);
|
|
|
|
|
|
|
|
case LIRC_SET_MEASURE_CARRIER_MODE:
|
|
|
|
if (!dev->s_carrier_report)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
return dev->s_carrier_report(dev, !!val);
|
|
|
|
|
|
|
|
/* Generic timeout support */
|
|
|
|
case LIRC_GET_MIN_TIMEOUT:
|
|
|
|
if (!dev->max_timeout)
|
|
|
|
return -ENOTTY;
|
|
|
|
val = DIV_ROUND_UP(dev->min_timeout, 1000);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LIRC_GET_MAX_TIMEOUT:
|
|
|
|
if (!dev->max_timeout)
|
|
|
|
return -ENOTTY;
|
|
|
|
val = dev->max_timeout / 1000;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LIRC_SET_REC_TIMEOUT:
|
|
|
|
if (!dev->max_timeout)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
/* Check for multiply overflow */
|
|
|
|
if (val > U32_MAX / 1000)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
tmp = val * 1000;
|
|
|
|
|
|
|
|
if (tmp < dev->min_timeout || tmp > dev->max_timeout)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (dev->s_timeout)
|
|
|
|
ret = dev->s_timeout(dev, tmp);
|
|
|
|
if (!ret)
|
|
|
|
dev->timeout = tmp;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LIRC_SET_REC_TIMEOUT_REPORTS:
|
|
|
|
if (!dev->timeout)
|
|
|
|
return -ENOTTY;
|
|
|
|
|
|
|
|
dev->send_timeout_reports = !!val;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return -ENOTTY;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (_IOC_DIR(cmd) & _IOC_READ)
|
|
|
|
ret = put_user(val, argp);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned int ir_lirc_poll(struct file *file,
|
|
|
|
struct poll_table_struct *wait)
|
|
|
|
{
|
|
|
|
struct rc_dev *rcdev = file->private_data;
|
|
|
|
unsigned int events = 0;
|
|
|
|
|
|
|
|
poll_wait(file, &rcdev->wait_poll, wait);
|
|
|
|
|
|
|
|
if (!rcdev->registered) {
|
|
|
|
events = POLLHUP | POLLERR;
|
|
|
|
} else if (rcdev->driver_type != RC_DRIVER_IR_RAW_TX) {
|
|
|
|
if (rcdev->rec_mode == LIRC_MODE_SCANCODE &&
|
|
|
|
!kfifo_is_empty(&rcdev->scancodes))
|
|
|
|
events = POLLIN | POLLRDNORM;
|
|
|
|
|
|
|
|
if (rcdev->rec_mode == LIRC_MODE_MODE2 &&
|
|
|
|
!kfifo_is_empty(&rcdev->rawir))
|
|
|
|
events = POLLIN | POLLRDNORM;
|
|
|
|
}
|
|
|
|
|
|
|
|
return events;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t ir_lirc_read_mode2(struct file *file, char __user *buffer,
|
|
|
|
size_t length)
|
|
|
|
{
|
|
|
|
struct rc_dev *rcdev = file->private_data;
|
|
|
|
unsigned int copied;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (length < sizeof(unsigned int) || length % sizeof(unsigned int))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
do {
|
|
|
|
if (kfifo_is_empty(&rcdev->rawir)) {
|
|
|
|
if (file->f_flags & O_NONBLOCK)
|
|
|
|
return -EAGAIN;
|
|
|
|
|
|
|
|
ret = wait_event_interruptible(rcdev->wait_poll,
|
|
|
|
!kfifo_is_empty(&rcdev->rawir) ||
|
|
|
|
!rcdev->registered);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!rcdev->registered)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
ret = mutex_lock_interruptible(&rcdev->lock);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
ret = kfifo_to_user(&rcdev->rawir, buffer, length, &copied);
|
|
|
|
mutex_unlock(&rcdev->lock);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
} while (copied == 0);
|
|
|
|
|
|
|
|
return copied;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t ir_lirc_read_scancode(struct file *file, char __user *buffer,
|
|
|
|
size_t length)
|
|
|
|
{
|
|
|
|
struct rc_dev *rcdev = file->private_data;
|
|
|
|
unsigned int copied;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (length < sizeof(struct lirc_scancode) ||
|
|
|
|
length % sizeof(struct lirc_scancode))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
do {
|
|
|
|
if (kfifo_is_empty(&rcdev->scancodes)) {
|
|
|
|
if (file->f_flags & O_NONBLOCK)
|
|
|
|
return -EAGAIN;
|
|
|
|
|
|
|
|
ret = wait_event_interruptible(rcdev->wait_poll,
|
|
|
|
!kfifo_is_empty(&rcdev->scancodes) ||
|
|
|
|
!rcdev->registered);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!rcdev->registered)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
ret = mutex_lock_interruptible(&rcdev->lock);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
ret = kfifo_to_user(&rcdev->scancodes, buffer, length, &copied);
|
|
|
|
mutex_unlock(&rcdev->lock);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
} while (copied == 0);
|
|
|
|
|
|
|
|
return copied;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
|
|
|
|
size_t length, loff_t *ppos)
|
|
|
|
{
|
|
|
|
struct rc_dev *rcdev = file->private_data;
|
|
|
|
|
|
|
|
if (rcdev->driver_type == RC_DRIVER_IR_RAW_TX)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!rcdev->registered)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
if (rcdev->rec_mode == LIRC_MODE_MODE2)
|
|
|
|
return ir_lirc_read_mode2(file, buffer, length);
|
|
|
|
else /* LIRC_MODE_SCANCODE */
|
|
|
|
return ir_lirc_read_scancode(file, buffer, length);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations lirc_fops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.write = ir_lirc_transmit_ir,
|
|
|
|
.unlocked_ioctl = ir_lirc_ioctl,
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
.compat_ioctl = ir_lirc_ioctl,
|
|
|
|
#endif
|
|
|
|
.read = ir_lirc_read,
|
|
|
|
.poll = ir_lirc_poll,
|
|
|
|
.open = ir_lirc_open,
|
|
|
|
.release = ir_lirc_close,
|
|
|
|
.llseek = no_llseek,
|
|
|
|
};
|
|
|
|
|
2017-06-25 15:32:36 +03:00
|
|
|
static void lirc_release_device(struct device *ld)
|
2010-07-03 08:06:57 +04:00
|
|
|
{
|
2017-09-26 16:34:47 +03:00
|
|
|
struct rc_dev *rcdev = container_of(ld, struct rc_dev, lirc_dev);
|
2017-06-30 11:41:57 +03:00
|
|
|
|
2017-09-23 21:44:18 +03:00
|
|
|
if (rcdev->driver_type == RC_DRIVER_IR_RAW)
|
|
|
|
kfifo_free(&rcdev->rawir);
|
media: lirc: implement reading scancode
This implements LIRC_MODE_SCANCODE reading from the lirc device. The
scancode can be read from the input device too, but with this interface
you get the rc protocol, keycode, toggle and repeat status in addition
to just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_proto, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-25 14:51:32 +03:00
|
|
|
if (rcdev->driver_type != RC_DRIVER_IR_RAW_TX)
|
|
|
|
kfifo_free(&rcdev->scancodes);
|
2017-01-30 18:49:58 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
put_device(&rcdev->dev);
|
2017-06-25 15:32:15 +03:00
|
|
|
}
|
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
int ir_lirc_register(struct rc_dev *dev)
|
2016-07-06 12:01:13 +03:00
|
|
|
{
|
2017-09-26 16:34:47 +03:00
|
|
|
int err, minor;
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
device_initialize(&dev->lirc_dev);
|
|
|
|
dev->lirc_dev.class = lirc_class;
|
|
|
|
dev->lirc_dev.release = lirc_release_device;
|
|
|
|
dev->send_mode = LIRC_MODE_PULSE;
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-24 19:43:24 +03:00
|
|
|
if (dev->driver_type == RC_DRIVER_SCANCODE)
|
|
|
|
dev->rec_mode = LIRC_MODE_SCANCODE;
|
|
|
|
else
|
|
|
|
dev->rec_mode = LIRC_MODE_MODE2;
|
media: lirc: implement reading scancode
This implements LIRC_MODE_SCANCODE reading from the lirc device. The
scancode can be read from the input device too, but with this interface
you get the rc protocol, keycode, toggle and repeat status in addition
to just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_proto, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-25 14:51:32 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
if (dev->driver_type == RC_DRIVER_IR_RAW) {
|
|
|
|
if (kfifo_alloc(&dev->rawir, MAX_IR_EVENT_SIZE, GFP_KERNEL))
|
|
|
|
return -ENOMEM;
|
2010-10-18 19:02:01 +04:00
|
|
|
}
|
|
|
|
|
media: lirc: implement reading scancode
This implements LIRC_MODE_SCANCODE reading from the lirc device. The
scancode can be read from the input device too, but with this interface
you get the rc protocol, keycode, toggle and repeat status in addition
to just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_proto, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-25 14:51:32 +03:00
|
|
|
if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
|
|
|
|
if (kfifo_alloc(&dev->scancodes, 32, GFP_KERNEL)) {
|
|
|
|
kfifo_free(&dev->rawir);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
init_waitqueue_head(&dev->wait_poll);
|
2017-05-01 19:04:21 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
minor = ida_simple_get(&lirc_ida, 0, RC_DEV_MAX, GFP_KERNEL);
|
|
|
|
if (minor < 0) {
|
|
|
|
err = minor;
|
|
|
|
goto out_kfifo;
|
2017-06-30 11:41:57 +03:00
|
|
|
}
|
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
dev->lirc_dev.parent = &dev->dev;
|
|
|
|
dev->lirc_dev.devt = MKDEV(MAJOR(lirc_base_dev), minor);
|
|
|
|
dev_set_name(&dev->lirc_dev, "lirc%d", minor);
|
2017-05-01 19:04:21 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
cdev_init(&dev->lirc_cdev, &lirc_fops);
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
err = cdev_device_add(&dev->lirc_cdev, &dev->lirc_dev);
|
|
|
|
if (err)
|
|
|
|
goto out_ida;
|
2017-01-30 18:49:58 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
get_device(&dev->dev);
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
dev_info(&dev->dev, "lirc_dev: driver %s registered at minor = %d",
|
|
|
|
dev->driver_name, minor);
|
2017-05-01 19:04:11 +03:00
|
|
|
|
2017-06-25 15:31:24 +03:00
|
|
|
return 0;
|
2017-09-26 16:34:47 +03:00
|
|
|
|
|
|
|
out_ida:
|
|
|
|
ida_simple_remove(&lirc_ida, minor);
|
|
|
|
out_kfifo:
|
|
|
|
if (dev->driver_type == RC_DRIVER_IR_RAW)
|
|
|
|
kfifo_free(&dev->rawir);
|
media: lirc: implement reading scancode
This implements LIRC_MODE_SCANCODE reading from the lirc device. The
scancode can be read from the input device too, but with this interface
you get the rc protocol, keycode, toggle and repeat status in addition
to just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_proto, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-25 14:51:32 +03:00
|
|
|
if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
|
|
|
|
kfifo_free(&dev->scancodes);
|
2017-09-26 16:34:47 +03:00
|
|
|
return err;
|
2010-07-03 08:06:57 +04:00
|
|
|
}
|
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
void ir_lirc_unregister(struct rc_dev *dev)
|
2010-07-03 08:06:57 +04:00
|
|
|
{
|
2017-09-26 16:34:47 +03:00
|
|
|
dev_dbg(&dev->dev, "lirc_dev: driver %s unregistered from minor = %d\n",
|
|
|
|
dev->driver_name, MINOR(dev->lirc_dev.devt));
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
mutex_lock(&dev->lock);
|
2017-06-30 11:41:57 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
if (dev->lirc_open) {
|
|
|
|
dev_dbg(&dev->dev, LOGHEAD "releasing opened driver\n",
|
|
|
|
dev->driver_name, MINOR(dev->lirc_dev.devt));
|
|
|
|
wake_up_poll(&dev->wait_poll, POLLHUP);
|
2017-01-30 18:49:58 +03:00
|
|
|
}
|
2016-07-06 12:01:26 +03:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
mutex_unlock(&dev->lock);
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
cdev_device_del(&dev->lirc_cdev, &dev->lirc_dev);
|
|
|
|
ida_simple_remove(&lirc_ida, MINOR(dev->lirc_dev.devt));
|
|
|
|
put_device(&dev->lirc_dev);
|
2010-07-03 08:06:57 +04:00
|
|
|
}
|
|
|
|
|
2017-09-23 17:41:13 +03:00
|
|
|
int __init lirc_dev_init(void)
|
2010-07-03 08:06:57 +04:00
|
|
|
{
|
|
|
|
int retval;
|
|
|
|
|
|
|
|
lirc_class = class_create(THIS_MODULE, "lirc");
|
|
|
|
if (IS_ERR(lirc_class)) {
|
2016-07-06 12:01:16 +03:00
|
|
|
pr_err("class_create failed\n");
|
2016-07-06 12:01:17 +03:00
|
|
|
return PTR_ERR(lirc_class);
|
2010-07-03 08:06:57 +04:00
|
|
|
}
|
|
|
|
|
2017-09-26 16:34:47 +03:00
|
|
|
retval = alloc_chrdev_region(&lirc_base_dev, 0, RC_DEV_MAX,
|
2017-05-01 19:04:47 +03:00
|
|
|
"BaseRemoteCtl");
|
2010-07-03 08:06:57 +04:00
|
|
|
if (retval) {
|
|
|
|
class_destroy(lirc_class);
|
2016-07-06 12:01:16 +03:00
|
|
|
pr_err("alloc_chrdev_region failed\n");
|
2016-07-06 12:01:17 +03:00
|
|
|
return retval;
|
2010-07-03 08:06:57 +04:00
|
|
|
}
|
|
|
|
|
2016-07-06 12:01:16 +03:00
|
|
|
pr_info("IR Remote Control driver registered, major %d\n",
|
|
|
|
MAJOR(lirc_base_dev));
|
2010-07-03 08:06:57 +04:00
|
|
|
|
2016-07-06 12:01:17 +03:00
|
|
|
return 0;
|
2010-07-03 08:06:57 +04:00
|
|
|
}
|
|
|
|
|
2017-09-23 17:41:13 +03:00
|
|
|
void __exit lirc_dev_exit(void)
|
2010-07-03 08:06:57 +04:00
|
|
|
{
|
|
|
|
class_destroy(lirc_class);
|
2017-09-26 16:34:47 +03:00
|
|
|
unregister_chrdev_region(lirc_base_dev, RC_DEV_MAX);
|
2010-07-03 08:06:57 +04:00
|
|
|
}
|