WSL2-Linux-Kernel/drivers/bluetooth/hci_usb.c

1134 строки
28 KiB
C
Исходник Обычный вид История

/*
HCI USB driver for Linux Bluetooth protocol stack (BlueZ)
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
Copyright (C) 2003 Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
SOFTWARE IS DISCLAIMED.
*/
/*
* Bluetooth HCI USB driver.
* Based on original USB Bluetooth driver for Linux kernel
* Copyright (c) 2000 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (c) 2000 Mark Douglas Corner <mcorner@umich.edu>
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/unistd.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_usb.h"
#ifndef CONFIG_BT_HCIUSB_DEBUG
#undef BT_DBG
#define BT_DBG(D...)
#endif
#ifndef CONFIG_BT_HCIUSB_ZERO_PACKET
#undef URB_ZERO_PACKET
#define URB_ZERO_PACKET 0
#endif
static int ignore;
static int ignore_dga;
static int ignore_csr;
static int ignore_sniffer;
static int disable_scofix;
static int force_scofix;
static int reset;
#ifdef CONFIG_BT_HCIUSB_SCO
static int isoc = 2;
#endif
#define VERSION "2.9"
static struct usb_driver hci_usb_driver;
static struct usb_device_id bluetooth_ids[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(HCI_DEV_CLASS, HCI_DEV_SUBCLASS, HCI_DEV_PROTOCOL) },
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
/* Bluetooth Ultraport Module from IBM */
{ USB_DEVICE(0x04bf, 0x030a) },
/* ALPS Modules with non-standard id */
{ USB_DEVICE(0x044e, 0x3001) },
{ USB_DEVICE(0x044e, 0x3002) },
/* Ericsson with non-standard id */
{ USB_DEVICE(0x0bdb, 0x1002) },
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000), .driver_info = HCI_RESET },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, bluetooth_ids);
static struct usb_device_id blacklist_ids[] = {
/* CSR BlueCore devices */
{ USB_DEVICE(0x0a12, 0x0001), .driver_info = HCI_CSR },
/* Broadcom BCM2033 without firmware */
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = HCI_IGNORE },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 },
/* Broadcom BCM2045 */
{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* Targus ACB10US */
{ USB_DEVICE(0x0a5c, 0x2100), .driver_info = HCI_RESET },
/* ANYCOM Bluetooth USB-200 and USB-250 */
{ USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET },
/* HP laptop with Broadcom chip */
{ USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* Dell laptop with Broadcom chip */
{ USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET },
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET },
{ USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* ISSC Bluetooth Adapter v3.1 */
{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
/* RTX Telecom based adapters with buggy SCO support */
{ USB_DEVICE(0x0400, 0x0807), .driver_info = HCI_BROKEN_ISOC },
{ USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC },
/* CONWISE Technology based adapters with buggy SCO support */
{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC },
/* Belkin F8T012 and F8T013 devices */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = HCI_DIGIANSWER },
{ USB_DEVICE(0x08fd, 0x0002), .driver_info = HCI_IGNORE },
/* CSR BlueCore Bluetooth Sniffer */
{ USB_DEVICE(0x0a12, 0x0002), .driver_info = HCI_SNIFFER },
/* Frontline ComProbe Bluetooth Sniffer */
{ USB_DEVICE(0x16d3, 0x0002), .driver_info = HCI_SNIFFER },
{ } /* Terminating entry */
};
static struct _urb *_urb_alloc(int isoc, gfp_t gfp)
{
struct _urb *_urb = kmalloc(sizeof(struct _urb) +
sizeof(struct usb_iso_packet_descriptor) * isoc, gfp);
if (_urb) {
memset(_urb, 0, sizeof(*_urb));
usb_init_urb(&_urb->urb);
}
return _urb;
}
static struct _urb *_urb_dequeue(struct _urb_queue *q)
{
struct _urb *_urb = NULL;
unsigned long flags;
spin_lock_irqsave(&q->lock, flags);
{
struct list_head *head = &q->head;
struct list_head *next = head->next;
if (next != head) {
_urb = list_entry(next, struct _urb, list);
list_del(next); _urb->queue = NULL;
}
}
spin_unlock_irqrestore(&q->lock, flags);
return _urb;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
static void hci_usb_rx_complete(struct urb *urb);
static void hci_usb_tx_complete(struct urb *urb);
#define __pending_tx(husb, type) (&husb->pending_tx[type-1])
#define __pending_q(husb, type) (&husb->pending_q[type-1])
#define __completed_q(husb, type) (&husb->completed_q[type-1])
#define __transmit_q(husb, type) (&husb->transmit_q[type-1])
static inline struct _urb *__get_completed(struct hci_usb *husb, int type)
{
return _urb_dequeue(__completed_q(husb, type));
}
#ifdef CONFIG_BT_HCIUSB_SCO
static void __fill_isoc_desc(struct urb *urb, int len, int mtu)
{
int offset = 0, i;
BT_DBG("len %d mtu %d", len, mtu);
for (i=0; i < HCI_MAX_ISOC_FRAMES && len >= mtu; i++, offset += mtu, len -= mtu) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = mtu;
BT_DBG("desc %d offset %d len %d", i, offset, mtu);
}
if (len && i < HCI_MAX_ISOC_FRAMES) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = len;
BT_DBG("desc %d offset %d len %d", i, offset, len);
i++;
}
urb->number_of_packets = i;
}
#endif
static int hci_usb_intr_rx_submit(struct hci_usb *husb)
{
struct _urb *_urb;
struct urb *urb;
int err, pipe, interval, size;
void *buf;
BT_DBG("%s", husb->hdev->name);
size = le16_to_cpu(husb->intr_in_ep->desc.wMaxPacketSize);
buf = kmalloc(size, GFP_ATOMIC);
if (!buf)
return -ENOMEM;
_urb = _urb_alloc(0, GFP_ATOMIC);
if (!_urb) {
kfree(buf);
return -ENOMEM;
}
_urb->type = HCI_EVENT_PKT;
_urb_queue_tail(__pending_q(husb, _urb->type), _urb);
urb = &_urb->urb;
pipe = usb_rcvintpipe(husb->udev, husb->intr_in_ep->desc.bEndpointAddress);
interval = husb->intr_in_ep->desc.bInterval;
usb_fill_int_urb(urb, husb->udev, pipe, buf, size, hci_usb_rx_complete, husb, interval);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err) {
BT_ERR("%s intr rx submit failed urb %p err %d",
husb->hdev->name, urb, err);
_urb_unlink(_urb);
_urb_free(_urb);
kfree(buf);
}
return err;
}
static int hci_usb_bulk_rx_submit(struct hci_usb *husb)
{
struct _urb *_urb;
struct urb *urb;
int err, pipe, size = HCI_MAX_FRAME_SIZE;
void *buf;
buf = kmalloc(size, GFP_ATOMIC);
if (!buf)
return -ENOMEM;
_urb = _urb_alloc(0, GFP_ATOMIC);
if (!_urb) {
kfree(buf);
return -ENOMEM;
}
_urb->type = HCI_ACLDATA_PKT;
_urb_queue_tail(__pending_q(husb, _urb->type), _urb);
urb = &_urb->urb;
pipe = usb_rcvbulkpipe(husb->udev, husb->bulk_in_ep->desc.bEndpointAddress);
usb_fill_bulk_urb(urb, husb->udev, pipe, buf, size, hci_usb_rx_complete, husb);
urb->transfer_flags = 0;
BT_DBG("%s urb %p", husb->hdev->name, urb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err) {
BT_ERR("%s bulk rx submit failed urb %p err %d",
husb->hdev->name, urb, err);
_urb_unlink(_urb);
_urb_free(_urb);
kfree(buf);
}
return err;
}
#ifdef CONFIG_BT_HCIUSB_SCO
static int hci_usb_isoc_rx_submit(struct hci_usb *husb)
{
struct _urb *_urb;
struct urb *urb;
int err, mtu, size;
void *buf;
mtu = le16_to_cpu(husb->isoc_in_ep->desc.wMaxPacketSize);
size = mtu * HCI_MAX_ISOC_FRAMES;
buf = kmalloc(size, GFP_ATOMIC);
if (!buf)
return -ENOMEM;
_urb = _urb_alloc(HCI_MAX_ISOC_FRAMES, GFP_ATOMIC);
if (!_urb) {
kfree(buf);
return -ENOMEM;
}
_urb->type = HCI_SCODATA_PKT;
_urb_queue_tail(__pending_q(husb, _urb->type), _urb);
urb = &_urb->urb;
urb->context = husb;
urb->dev = husb->udev;
urb->pipe = usb_rcvisocpipe(husb->udev, husb->isoc_in_ep->desc.bEndpointAddress);
urb->complete = hci_usb_rx_complete;
urb->interval = husb->isoc_in_ep->desc.bInterval;
urb->transfer_buffer_length = size;
urb->transfer_buffer = buf;
urb->transfer_flags = URB_ISO_ASAP;
__fill_isoc_desc(urb, size, mtu);
BT_DBG("%s urb %p", husb->hdev->name, urb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err) {
BT_ERR("%s isoc rx submit failed urb %p err %d",
husb->hdev->name, urb, err);
_urb_unlink(_urb);
_urb_free(_urb);
kfree(buf);
}
return err;
}
#endif
/* Initialize device */
static int hci_usb_open(struct hci_dev *hdev)
{
struct hci_usb *husb = (struct hci_usb *) hdev->driver_data;
int i, err;
unsigned long flags;
BT_DBG("%s", hdev->name);
if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
return 0;
write_lock_irqsave(&husb->completion_lock, flags);
err = hci_usb_intr_rx_submit(husb);
if (!err) {
for (i = 0; i < HCI_MAX_BULK_RX; i++)
hci_usb_bulk_rx_submit(husb);
#ifdef CONFIG_BT_HCIUSB_SCO
if (husb->isoc_iface)
for (i = 0; i < HCI_MAX_ISOC_RX; i++)
hci_usb_isoc_rx_submit(husb);
#endif
} else {
clear_bit(HCI_RUNNING, &hdev->flags);
}
write_unlock_irqrestore(&husb->completion_lock, flags);
return err;
}
/* Reset device */
static int hci_usb_flush(struct hci_dev *hdev)
{
struct hci_usb *husb = (struct hci_usb *) hdev->driver_data;
int i;
BT_DBG("%s", hdev->name);
for (i = 0; i < 4; i++)
skb_queue_purge(&husb->transmit_q[i]);
return 0;
}
static void hci_usb_unlink_urbs(struct hci_usb *husb)
{
int i;
BT_DBG("%s", husb->hdev->name);
for (i = 0; i < 4; i++) {
struct _urb *_urb;
struct urb *urb;
/* Kill pending requests */
while ((_urb = _urb_dequeue(&husb->pending_q[i]))) {
urb = &_urb->urb;
BT_DBG("%s unlinking _urb %p type %d urb %p",
husb->hdev->name, _urb, _urb->type, urb);
usb_kill_urb(urb);
_urb_queue_tail(__completed_q(husb, _urb->type), _urb);
}
/* Release completed requests */
while ((_urb = _urb_dequeue(&husb->completed_q[i]))) {
urb = &_urb->urb;
BT_DBG("%s freeing _urb %p type %d urb %p",
husb->hdev->name, _urb, _urb->type, urb);
kfree(urb->setup_packet);
kfree(urb->transfer_buffer);
_urb_free(_urb);
}
}
}
/* Close device */
static int hci_usb_close(struct hci_dev *hdev)
{
struct hci_usb *husb = (struct hci_usb *) hdev->driver_data;
unsigned long flags;
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
BT_DBG("%s", hdev->name);
/* Synchronize with completion handlers */
write_lock_irqsave(&husb->completion_lock, flags);
write_unlock_irqrestore(&husb->completion_lock, flags);
hci_usb_unlink_urbs(husb);
hci_usb_flush(hdev);
return 0;
}
static int __tx_submit(struct hci_usb *husb, struct _urb *_urb)
{
struct urb *urb = &_urb->urb;
int err;
BT_DBG("%s urb %p type %d", husb->hdev->name, urb, _urb->type);
_urb_queue_tail(__pending_q(husb, _urb->type), _urb);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err) {
BT_ERR("%s tx submit failed urb %p type %d err %d",
husb->hdev->name, urb, _urb->type, err);
_urb_unlink(_urb);
_urb_queue_tail(__completed_q(husb, _urb->type), _urb);
} else
atomic_inc(__pending_tx(husb, _urb->type));
return err;
}
static inline int hci_usb_send_ctrl(struct hci_usb *husb, struct sk_buff *skb)
{
struct _urb *_urb = __get_completed(husb, bt_cb(skb)->pkt_type);
struct usb_ctrlrequest *dr;
struct urb *urb;
if (!_urb) {
_urb = _urb_alloc(0, GFP_ATOMIC);
if (!_urb)
return -ENOMEM;
_urb->type = bt_cb(skb)->pkt_type;
dr = kmalloc(sizeof(*dr), GFP_ATOMIC);
if (!dr) {
_urb_free(_urb);
return -ENOMEM;
}
} else
dr = (void *) _urb->urb.setup_packet;
dr->bRequestType = husb->ctrl_req;
dr->bRequest = 0;
dr->wIndex = 0;
dr->wValue = 0;
dr->wLength = __cpu_to_le16(skb->len);
urb = &_urb->urb;
usb_fill_control_urb(urb, husb->udev, usb_sndctrlpipe(husb->udev, 0),
(void *) dr, skb->data, skb->len, hci_usb_tx_complete, husb);
BT_DBG("%s skb %p len %d", husb->hdev->name, skb, skb->len);
_urb->priv = skb;
return __tx_submit(husb, _urb);
}
static inline int hci_usb_send_bulk(struct hci_usb *husb, struct sk_buff *skb)
{
struct _urb *_urb = __get_completed(husb, bt_cb(skb)->pkt_type);
struct urb *urb;
int pipe;
if (!_urb) {
_urb = _urb_alloc(0, GFP_ATOMIC);
if (!_urb)
return -ENOMEM;
_urb->type = bt_cb(skb)->pkt_type;
}
urb = &_urb->urb;
pipe = usb_sndbulkpipe(husb->udev, husb->bulk_out_ep->desc.bEndpointAddress);
usb_fill_bulk_urb(urb, husb->udev, pipe, skb->data, skb->len,
hci_usb_tx_complete, husb);
urb->transfer_flags = URB_ZERO_PACKET;
BT_DBG("%s skb %p len %d", husb->hdev->name, skb, skb->len);
_urb->priv = skb;
return __tx_submit(husb, _urb);
}
#ifdef CONFIG_BT_HCIUSB_SCO
static inline int hci_usb_send_isoc(struct hci_usb *husb, struct sk_buff *skb)
{
struct _urb *_urb = __get_completed(husb, bt_cb(skb)->pkt_type);
struct urb *urb;
if (!_urb) {
_urb = _urb_alloc(HCI_MAX_ISOC_FRAMES, GFP_ATOMIC);
if (!_urb)
return -ENOMEM;
_urb->type = bt_cb(skb)->pkt_type;
}
BT_DBG("%s skb %p len %d", husb->hdev->name, skb, skb->len);
urb = &_urb->urb;
urb->context = husb;
urb->dev = husb->udev;
urb->pipe = usb_sndisocpipe(husb->udev, husb->isoc_out_ep->desc.bEndpointAddress);
urb->complete = hci_usb_tx_complete;
urb->transfer_flags = URB_ISO_ASAP;
urb->interval = husb->isoc_out_ep->desc.bInterval;
urb->transfer_buffer = skb->data;
urb->transfer_buffer_length = skb->len;
__fill_isoc_desc(urb, skb->len, le16_to_cpu(husb->isoc_out_ep->desc.wMaxPacketSize));
_urb->priv = skb;
return __tx_submit(husb, _urb);
}
#endif
static void hci_usb_tx_process(struct hci_usb *husb)
{
struct sk_buff_head *q;
struct sk_buff *skb;
BT_DBG("%s", husb->hdev->name);
do {
clear_bit(HCI_USB_TX_WAKEUP, &husb->state);
/* Process command queue */
q = __transmit_q(husb, HCI_COMMAND_PKT);
if (!atomic_read(__pending_tx(husb, HCI_COMMAND_PKT)) &&
(skb = skb_dequeue(q))) {
if (hci_usb_send_ctrl(husb, skb) < 0)
skb_queue_head(q, skb);
}
#ifdef CONFIG_BT_HCIUSB_SCO
/* Process SCO queue */
q = __transmit_q(husb, HCI_SCODATA_PKT);
if (atomic_read(__pending_tx(husb, HCI_SCODATA_PKT)) < HCI_MAX_ISOC_TX &&
(skb = skb_dequeue(q))) {
if (hci_usb_send_isoc(husb, skb) < 0)
skb_queue_head(q, skb);
}
#endif
/* Process ACL queue */
q = __transmit_q(husb, HCI_ACLDATA_PKT);
while (atomic_read(__pending_tx(husb, HCI_ACLDATA_PKT)) < HCI_MAX_BULK_TX &&
(skb = skb_dequeue(q))) {
if (hci_usb_send_bulk(husb, skb) < 0) {
skb_queue_head(q, skb);
break;
}
}
} while(test_bit(HCI_USB_TX_WAKEUP, &husb->state));
}
static inline void hci_usb_tx_wakeup(struct hci_usb *husb)
{
/* Serialize TX queue processing to avoid data reordering */
if (!test_and_set_bit(HCI_USB_TX_PROCESS, &husb->state)) {
hci_usb_tx_process(husb);
clear_bit(HCI_USB_TX_PROCESS, &husb->state);
} else
set_bit(HCI_USB_TX_WAKEUP, &husb->state);
}
/* Send frames from HCI layer */
static int hci_usb_send_frame(struct sk_buff *skb)
{
struct hci_dev *hdev = (struct hci_dev *) skb->dev;
struct hci_usb *husb;
if (!hdev) {
BT_ERR("frame for uknown device (hdev=NULL)");
return -ENODEV;
}
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -EBUSY;
BT_DBG("%s type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len);
husb = (struct hci_usb *) hdev->driver_data;
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
hdev->stat.cmd_tx++;
break;
case HCI_ACLDATA_PKT:
hdev->stat.acl_tx++;
break;
#ifdef CONFIG_BT_HCIUSB_SCO
case HCI_SCODATA_PKT:
hdev->stat.sco_tx++;
break;
#endif
default:
kfree_skb(skb);
return 0;
}
read_lock(&husb->completion_lock);
skb_queue_tail(__transmit_q(husb, bt_cb(skb)->pkt_type), skb);
hci_usb_tx_wakeup(husb);
read_unlock(&husb->completion_lock);
return 0;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
static void hci_usb_rx_complete(struct urb *urb)
{
struct _urb *_urb = container_of(urb, struct _urb, urb);
struct hci_usb *husb = (void *) urb->context;
struct hci_dev *hdev = husb->hdev;
int err, count = urb->actual_length;
BT_DBG("%s urb %p type %d status %d count %d flags %x", hdev->name, urb,
_urb->type, urb->status, count, urb->transfer_flags);
read_lock(&husb->completion_lock);
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto unlock;
if (urb->status || !count)
goto resubmit;
if (_urb->type == HCI_SCODATA_PKT) {
#ifdef CONFIG_BT_HCIUSB_SCO
int i;
for (i=0; i < urb->number_of_packets; i++) {
BT_DBG("desc %d status %d offset %d len %d", i,
urb->iso_frame_desc[i].status,
urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
if (!urb->iso_frame_desc[i].status) {
husb->hdev->stat.byte_rx += urb->iso_frame_desc[i].actual_length;
hci_recv_fragment(husb->hdev, _urb->type,
urb->transfer_buffer + urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
}
}
#else
;
#endif
} else {
husb->hdev->stat.byte_rx += count;
err = hci_recv_fragment(husb->hdev, _urb->type, urb->transfer_buffer, count);
if (err < 0) {
BT_ERR("%s corrupted packet: type %d count %d",
husb->hdev->name, _urb->type, count);
hdev->stat.err_rx++;
}
}
resubmit:
urb->dev = husb->udev;
err = usb_submit_urb(urb, GFP_ATOMIC);
BT_DBG("%s urb %p type %d resubmit status %d", hdev->name, urb,
_urb->type, err);
unlock:
read_unlock(&husb->completion_lock);
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
static void hci_usb_tx_complete(struct urb *urb)
{
struct _urb *_urb = container_of(urb, struct _urb, urb);
struct hci_usb *husb = (void *) urb->context;
struct hci_dev *hdev = husb->hdev;
BT_DBG("%s urb %p status %d flags %x", hdev->name, urb,
urb->status, urb->transfer_flags);
atomic_dec(__pending_tx(husb, _urb->type));
urb->transfer_buffer = NULL;
kfree_skb((struct sk_buff *) _urb->priv);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (!urb->status)
hdev->stat.byte_tx += urb->transfer_buffer_length;
else
hdev->stat.err_tx++;
read_lock(&husb->completion_lock);
_urb_unlink(_urb);
_urb_queue_tail(__completed_q(husb, _urb->type), _urb);
hci_usb_tx_wakeup(husb);
read_unlock(&husb->completion_lock);
}
static void hci_usb_destruct(struct hci_dev *hdev)
{
struct hci_usb *husb = (struct hci_usb *) hdev->driver_data;
BT_DBG("%s", hdev->name);
kfree(husb);
}
static void hci_usb_notify(struct hci_dev *hdev, unsigned int evt)
{
BT_DBG("%s evt %d", hdev->name, evt);
}
static int hci_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_host_endpoint *bulk_out_ep = NULL;
struct usb_host_endpoint *bulk_in_ep = NULL;
struct usb_host_endpoint *intr_in_ep = NULL;
struct usb_host_endpoint *ep;
struct usb_host_interface *uif;
struct usb_interface *isoc_iface;
struct hci_usb *husb;
struct hci_dev *hdev;
int i, e, size, isoc_ifnum, isoc_alts;
BT_DBG("udev %p intf %p", udev, intf);
if (!id->driver_info) {
const struct usb_device_id *match;
match = usb_match_id(intf, blacklist_ids);
if (match)
id = match;
}
if (ignore || id->driver_info & HCI_IGNORE)
return -ENODEV;
if (ignore_dga && id->driver_info & HCI_DIGIANSWER)
return -ENODEV;
if (ignore_csr && id->driver_info & HCI_CSR)
return -ENODEV;
if (ignore_sniffer && id->driver_info & HCI_SNIFFER)
return -ENODEV;
if (intf->cur_altsetting->desc.bInterfaceNumber > 0)
return -ENODEV;
/* Find endpoints that we need */
uif = intf->cur_altsetting;
for (e = 0; e < uif->desc.bNumEndpoints; e++) {
ep = &uif->endpoint[e];
switch (ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_INT:
if (ep->desc.bEndpointAddress & USB_DIR_IN)
intr_in_ep = ep;
break;
case USB_ENDPOINT_XFER_BULK:
if (ep->desc.bEndpointAddress & USB_DIR_IN)
bulk_in_ep = ep;
else
bulk_out_ep = ep;
break;
}
}
if (!bulk_in_ep || !bulk_out_ep || !intr_in_ep) {
BT_DBG("Bulk endpoints not found");
goto done;
}
if (!(husb = kzalloc(sizeof(struct hci_usb), GFP_KERNEL))) {
BT_ERR("Can't allocate: control structure");
goto done;
}
husb->udev = udev;
husb->bulk_out_ep = bulk_out_ep;
husb->bulk_in_ep = bulk_in_ep;
husb->intr_in_ep = intr_in_ep;
if (id->driver_info & HCI_DIGIANSWER)
husb->ctrl_req = USB_TYPE_VENDOR;
else
husb->ctrl_req = USB_TYPE_CLASS;
/* Find isochronous endpoints that we can use */
size = 0;
isoc_iface = NULL;
isoc_alts = 0;
isoc_ifnum = 1;
#ifdef CONFIG_BT_HCIUSB_SCO
if (isoc && !(id->driver_info & (HCI_BROKEN_ISOC | HCI_SNIFFER)))
isoc_iface = usb_ifnum_to_if(udev, isoc_ifnum);
if (isoc_iface) {
int a;
struct usb_host_endpoint *isoc_out_ep = NULL;
struct usb_host_endpoint *isoc_in_ep = NULL;
for (a = 0; a < isoc_iface->num_altsetting; a++) {
uif = &isoc_iface->altsetting[a];
for (e = 0; e < uif->desc.bNumEndpoints; e++) {
ep = &uif->endpoint[e];
switch (ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_ISOC:
if (le16_to_cpu(ep->desc.wMaxPacketSize) < size ||
uif->desc.bAlternateSetting != isoc)
break;
size = le16_to_cpu(ep->desc.wMaxPacketSize);
isoc_alts = uif->desc.bAlternateSetting;
if (ep->desc.bEndpointAddress & USB_DIR_IN)
isoc_in_ep = ep;
else
isoc_out_ep = ep;
break;
}
}
}
if (!isoc_in_ep || !isoc_out_ep)
BT_DBG("Isoc endpoints not found");
else {
BT_DBG("isoc ifnum %d alts %d", isoc_ifnum, isoc_alts);
if (usb_driver_claim_interface(&hci_usb_driver, isoc_iface, husb) != 0)
BT_ERR("Can't claim isoc interface");
else if (usb_set_interface(udev, isoc_ifnum, isoc_alts)) {
BT_ERR("Can't set isoc interface settings");
husb->isoc_iface = isoc_iface;
usb_driver_release_interface(&hci_usb_driver, isoc_iface);
husb->isoc_iface = NULL;
} else {
husb->isoc_iface = isoc_iface;
husb->isoc_in_ep = isoc_in_ep;
husb->isoc_out_ep = isoc_out_ep;
}
}
}
#endif
rwlock_init(&husb->completion_lock);
for (i = 0; i < 4; i++) {
skb_queue_head_init(&husb->transmit_q[i]);
_urb_queue_init(&husb->pending_q[i]);
_urb_queue_init(&husb->completed_q[i]);
}
/* Initialize and register HCI device */
hdev = hci_alloc_dev();
if (!hdev) {
BT_ERR("Can't allocate HCI device");
goto probe_error;
}
husb->hdev = hdev;
hdev->type = HCI_USB;
hdev->driver_data = husb;
SET_HCIDEV_DEV(hdev, &intf->dev);
hdev->open = hci_usb_open;
hdev->close = hci_usb_close;
hdev->flush = hci_usb_flush;
hdev->send = hci_usb_send_frame;
hdev->destruct = hci_usb_destruct;
hdev->notify = hci_usb_notify;
hdev->owner = THIS_MODULE;
if (reset || id->driver_info & HCI_RESET)
set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
if (force_scofix || id->driver_info & HCI_WRONG_SCO_MTU) {
if (!disable_scofix)
set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
}
if (id->driver_info & HCI_SNIFFER) {
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
}
if (id->driver_info & HCI_BCM92035) {
unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
struct sk_buff *skb;
skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
if (skb) {
memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
skb_queue_tail(&hdev->driver_init, skb);
}
}
if (hci_register_dev(hdev) < 0) {
BT_ERR("Can't register HCI device");
hci_free_dev(hdev);
goto probe_error;
}
usb_set_intfdata(intf, husb);
return 0;
probe_error:
if (husb->isoc_iface)
usb_driver_release_interface(&hci_usb_driver, husb->isoc_iface);
kfree(husb);
done:
return -EIO;
}
static void hci_usb_disconnect(struct usb_interface *intf)
{
struct hci_usb *husb = usb_get_intfdata(intf);
struct hci_dev *hdev;
if (!husb || intf == husb->isoc_iface)
return;
usb_set_intfdata(intf, NULL);
hdev = husb->hdev;
BT_DBG("%s", hdev->name);
hci_usb_close(hdev);
if (husb->isoc_iface)
usb_driver_release_interface(&hci_usb_driver, husb->isoc_iface);
if (hci_unregister_dev(hdev) < 0)
BT_ERR("Can't unregister HCI device %s", hdev->name);
hci_free_dev(hdev);
}
static int hci_usb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct hci_usb *husb = usb_get_intfdata(intf);
struct list_head killed;
unsigned long flags;
int i;
if (!husb || intf == husb->isoc_iface)
return 0;
hci_suspend_dev(husb->hdev);
INIT_LIST_HEAD(&killed);
for (i = 0; i < 4; i++) {
struct _urb_queue *q = &husb->pending_q[i];
struct _urb *_urb, *_tmp;
while ((_urb = _urb_dequeue(q))) {
/* reset queue since _urb_dequeue sets it to NULL */
_urb->queue = q;
usb_kill_urb(&_urb->urb);
list_add(&_urb->list, &killed);
}
spin_lock_irqsave(&q->lock, flags);
list_for_each_entry_safe(_urb, _tmp, &killed, list) {
list_move_tail(&_urb->list, &q->head);
}
spin_unlock_irqrestore(&q->lock, flags);
}
return 0;
}
static int hci_usb_resume(struct usb_interface *intf)
{
struct hci_usb *husb = usb_get_intfdata(intf);
unsigned long flags;
int i, err = 0;
if (!husb || intf == husb->isoc_iface)
return 0;
for (i = 0; i < 4; i++) {
struct _urb_queue *q = &husb->pending_q[i];
struct _urb *_urb;
spin_lock_irqsave(&q->lock, flags);
list_for_each_entry(_urb, &q->head, list) {
err = usb_submit_urb(&_urb->urb, GFP_ATOMIC);
if (err)
break;
}
spin_unlock_irqrestore(&q->lock, flags);
if (err)
return -EIO;
}
hci_resume_dev(husb->hdev);
return 0;
}
static struct usb_driver hci_usb_driver = {
.name = "hci_usb",
.probe = hci_usb_probe,
.disconnect = hci_usb_disconnect,
.suspend = hci_usb_suspend,
.resume = hci_usb_resume,
.id_table = bluetooth_ids,
};
static int __init hci_usb_init(void)
{
int err;
BT_INFO("HCI USB driver ver %s", VERSION);
if ((err = usb_register(&hci_usb_driver)) < 0)
BT_ERR("Failed to register HCI USB driver");
return err;
}
static void __exit hci_usb_exit(void)
{
usb_deregister(&hci_usb_driver);
}
module_init(hci_usb_init);
module_exit(hci_usb_exit);
module_param(ignore, bool, 0644);
MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
module_param(ignore_dga, bool, 0644);
MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
module_param(ignore_csr, bool, 0644);
MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001");
module_param(ignore_sniffer, bool, 0644);
MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002");
module_param(disable_scofix, bool, 0644);
MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
module_param(force_scofix, bool, 0644);
MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
module_param(reset, bool, 0644);
MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
#ifdef CONFIG_BT_HCIUSB_SCO
module_param(isoc, int, 0644);
MODULE_PARM_DESC(isoc, "Set isochronous transfers for SCO over HCI support");
#endif
MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth HCI USB driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");