License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
#ifndef TARGET_CORE_BASE_H
|
|
|
|
#define TARGET_CORE_BASE_H
|
|
|
|
|
2016-11-15 02:47:14 +03:00
|
|
|
#include <linux/configfs.h> /* struct config_group */
|
|
|
|
#include <linux/dma-direction.h> /* enum dma_data_direction */
|
2018-06-12 22:05:44 +03:00
|
|
|
#include <linux/sbitmap.h>
|
2017-02-02 13:54:05 +03:00
|
|
|
#include <linux/percpu-refcount.h>
|
2016-11-15 02:47:14 +03:00
|
|
|
#include <linux/semaphore.h> /* struct semaphore */
|
2017-02-05 18:15:03 +03:00
|
|
|
#include <linux/completion.h>
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2015-06-23 10:45:14 +03:00
|
|
|
#define TARGET_CORE_VERSION "v5.0"
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
/*
|
2015-05-08 11:08:55 +03:00
|
|
|
* Maximum size of a CDB that can be stored in se_cmd without allocating
|
|
|
|
* memory dynamically for the CDB.
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
*/
|
|
|
|
#define TCM_MAX_COMMAND_SIZE 32
|
|
|
|
/*
|
|
|
|
* From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
|
|
|
|
* defined 96, but the real limit is 252 (or 260 including the header)
|
|
|
|
*/
|
2015-05-08 11:11:12 +03:00
|
|
|
#define TRANSPORT_SENSE_BUFFER 96
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used by transport_send_check_condition_and_sense() */
|
|
|
|
#define SPC_SENSE_KEY_OFFSET 2
|
2011-12-14 02:55:33 +04:00
|
|
|
#define SPC_ADD_SENSE_LEN_OFFSET 7
|
2014-01-23 21:29:38 +04:00
|
|
|
#define SPC_DESC_TYPE_OFFSET 8
|
|
|
|
#define SPC_ADDITIONAL_DESC_LEN_OFFSET 9
|
|
|
|
#define SPC_VALIDITY_OFFSET 10
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
#define SPC_ASC_KEY_OFFSET 12
|
|
|
|
#define SPC_ASCQ_KEY_OFFSET 13
|
|
|
|
#define TRANSPORT_IQN_LEN 224
|
|
|
|
/* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
|
|
|
|
#define LU_GROUP_NAME_BUF 256
|
|
|
|
/* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
|
|
|
|
#define TG_PT_GROUP_NAME_BUF 256
|
|
|
|
/* Used to parse VPD into struct t10_vpd */
|
2013-01-18 17:05:12 +04:00
|
|
|
#define VPD_TMP_BUF_SIZE 254
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used by transport_generic_cmd_sequencer() */
|
|
|
|
#define READ_BLOCK_LEN 6
|
|
|
|
#define READ_CAP_LEN 8
|
|
|
|
#define READ_POSITION_LEN 20
|
|
|
|
#define INQUIRY_LEN 36
|
|
|
|
/* Used by transport_get_inquiry_vpd_serial() */
|
|
|
|
#define INQUIRY_VPD_SERIAL_LEN 254
|
|
|
|
/* Used by transport_get_inquiry_vpd_device_ident() */
|
|
|
|
#define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254
|
|
|
|
|
2018-12-05 15:18:35 +03:00
|
|
|
#define INQUIRY_VENDOR_LEN 8
|
|
|
|
#define INQUIRY_MODEL_LEN 16
|
|
|
|
#define INQUIRY_REVISION_LEN 4
|
|
|
|
|
2011-11-16 18:46:48 +04:00
|
|
|
/* Attempts before moving from SHORT to LONG */
|
|
|
|
#define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3
|
|
|
|
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */
|
|
|
|
#define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */
|
|
|
|
|
|
|
|
#define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */
|
|
|
|
|
|
|
|
/* struct se_dev_attrib sanity values */
|
|
|
|
/* Default max_unmap_lba_count */
|
|
|
|
#define DA_MAX_UNMAP_LBA_COUNT 0
|
|
|
|
/* Default max_unmap_block_desc_count */
|
|
|
|
#define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0
|
|
|
|
/* Default unmap_granularity */
|
|
|
|
#define DA_UNMAP_GRANULARITY_DEFAULT 0
|
|
|
|
/* Default unmap_granularity_alignment */
|
|
|
|
#define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0
|
2015-11-30 01:44:57 +03:00
|
|
|
/* Default unmap_zeroes_data */
|
|
|
|
#define DA_UNMAP_ZEROES_DATA_DEFAULT 0
|
2012-11-15 23:02:49 +04:00
|
|
|
/* Default max_write_same_len, disabled by default */
|
|
|
|
#define DA_MAX_WRITE_SAME_LEN 0
|
2013-02-01 02:30:24 +04:00
|
|
|
/* Use a model alias based on the configfs backend device name */
|
|
|
|
#define DA_EMULATE_MODEL_ALIAS 0
|
2011-11-16 18:46:48 +04:00
|
|
|
/* Emulation for WriteCache and SYNCHRONIZE_CACHE */
|
|
|
|
#define DA_EMULATE_WRITE_CACHE 0
|
|
|
|
/* Emulation for UNIT ATTENTION Interlock Control */
|
|
|
|
#define DA_EMULATE_UA_INTLLCK_CTRL 0
|
|
|
|
/* Emulation for TASK_ABORTED status (TAS) by default */
|
|
|
|
#define DA_EMULATE_TAS 1
|
|
|
|
/* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
|
|
|
|
#define DA_EMULATE_TPU 0
|
|
|
|
/*
|
|
|
|
* Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
|
|
|
|
* block/blk-lib.c:blkdev_issue_discard()
|
|
|
|
*/
|
|
|
|
#define DA_EMULATE_TPWS 0
|
2013-08-21 01:24:09 +04:00
|
|
|
/* Emulation for CompareAndWrite (AtomicTestandSet) by default */
|
|
|
|
#define DA_EMULATE_CAW 1
|
2013-08-23 01:17:20 +04:00
|
|
|
/* Emulation for 3rd Party Copy (ExtendedCopy) by default */
|
|
|
|
#define DA_EMULATE_3PC 1
|
2011-11-16 18:46:48 +04:00
|
|
|
/* No Emulation for PSCSI by default */
|
|
|
|
#define DA_EMULATE_ALUA 0
|
2018-11-07 16:11:07 +03:00
|
|
|
/* Emulate SCSI2 RESERVE/RELEASE and Persistent Reservations by default */
|
|
|
|
#define DA_EMULATE_PR 1
|
2011-11-16 18:46:48 +04:00
|
|
|
/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
|
|
|
|
#define DA_ENFORCE_PR_ISIDS 1
|
2014-10-04 05:06:08 +04:00
|
|
|
/* Force SPC-3 PR Activate Persistence across Target Power Loss */
|
|
|
|
#define DA_FORCE_PR_APTPL 0
|
2011-11-16 18:46:48 +04:00
|
|
|
#define DA_STATUS_MAX_SECTORS_MIN 16
|
|
|
|
#define DA_STATUS_MAX_SECTORS_MAX 8192
|
|
|
|
/* By default don't report non-rotating (solid state) medium */
|
|
|
|
#define DA_IS_NONROT 0
|
|
|
|
/* Queue Algorithm Modifier default for restricted reordering in control mode page */
|
|
|
|
#define DA_EMULATE_REST_REORD 0
|
|
|
|
|
2013-12-20 02:13:28 +04:00
|
|
|
#define SE_INQUIRY_BUF 1024
|
2011-11-16 18:46:48 +04:00
|
|
|
#define SE_MODE_PAGE_BUF 512
|
2012-09-07 19:30:36 +04:00
|
|
|
#define SE_SENSE_BUF 96
|
2011-11-16 18:46:48 +04:00
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* struct se_hba->hba_flags */
|
|
|
|
enum hba_flags_table {
|
|
|
|
HBA_FLAGS_INTERNAL_USE = 0x01,
|
|
|
|
HBA_FLAGS_PSCSI_MODE = 0x02,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Special transport agnostic struct se_cmd->t_states */
|
|
|
|
enum transport_state_table {
|
|
|
|
TRANSPORT_NO_STATE = 0,
|
|
|
|
TRANSPORT_NEW_CMD = 1,
|
|
|
|
TRANSPORT_WRITE_PENDING = 3,
|
|
|
|
TRANSPORT_PROCESSING = 5,
|
2011-10-17 21:56:53 +04:00
|
|
|
TRANSPORT_COMPLETE = 6,
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
TRANSPORT_ISTATE_PROCESSING = 11,
|
2011-06-14 01:46:09 +04:00
|
|
|
TRANSPORT_COMPLETE_QF_WP = 18,
|
2011-10-17 21:56:41 +04:00
|
|
|
TRANSPORT_COMPLETE_QF_OK = 19,
|
2016-10-31 03:28:16 +03:00
|
|
|
TRANSPORT_COMPLETE_QF_ERR = 20,
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Used for struct se_cmd->se_cmd_flags */
|
|
|
|
enum se_cmd_flags_table {
|
|
|
|
SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
|
|
|
|
SCF_TRANSPORT_TASK_SENSE = 0x00000002,
|
|
|
|
SCF_EMULATED_TASK_SENSE = 0x00000004,
|
2012-05-20 19:59:11 +04:00
|
|
|
SCF_SCSI_DATA_CDB = 0x00000008,
|
|
|
|
SCF_SCSI_TMR_CDB = 0x00000010,
|
|
|
|
SCF_FUA = 0x00000080,
|
|
|
|
SCF_SE_LUN_CMD = 0x00000100,
|
|
|
|
SCF_BIDI = 0x00000400,
|
|
|
|
SCF_SENT_CHECK_CONDITION = 0x00000800,
|
|
|
|
SCF_OVERFLOW_BIT = 0x00001000,
|
|
|
|
SCF_UNDERFLOW_BIT = 0x00002000,
|
|
|
|
SCF_ALUA_NON_OPTIMIZED = 0x00008000,
|
|
|
|
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
|
2013-08-20 10:57:30 +04:00
|
|
|
SCF_COMPARE_AND_WRITE = 0x00080000,
|
2015-05-01 09:23:49 +03:00
|
|
|
SCF_PASSTHROUGH_PROT_SG_TO_MEM_NOALLOC = 0x00200000,
|
2016-01-12 08:31:09 +03:00
|
|
|
SCF_ACK_KREF = 0x00400000,
|
2016-02-11 02:59:13 +03:00
|
|
|
SCF_USE_CPUID = 0x00800000,
|
2016-06-14 08:58:09 +03:00
|
|
|
SCF_TASK_ATTR_SET = 0x01000000,
|
2018-05-16 04:25:24 +03:00
|
|
|
SCF_TREAT_READ_AS_NORMAL = 0x02000000,
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
2012-11-07 00:24:09 +04:00
|
|
|
* Used by transport_send_check_condition_and_sense()
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
* to signal which ASC/ASCQ sense payload should be built.
|
|
|
|
*/
|
2016-12-11 07:34:53 +03:00
|
|
|
typedef unsigned __bitwise sense_reason_t;
|
2012-11-07 00:24:09 +04:00
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
enum tcm_sense_reason_table {
|
2012-11-07 00:24:09 +04:00
|
|
|
#define R(x) (__force sense_reason_t )(x)
|
2012-12-17 12:53:33 +04:00
|
|
|
TCM_NO_SENSE = R(0x00),
|
2012-11-07 00:24:09 +04:00
|
|
|
TCM_NON_EXISTENT_LUN = R(0x01),
|
|
|
|
TCM_UNSUPPORTED_SCSI_OPCODE = R(0x02),
|
|
|
|
TCM_INCORRECT_AMOUNT_OF_DATA = R(0x03),
|
|
|
|
TCM_UNEXPECTED_UNSOLICITED_DATA = R(0x04),
|
|
|
|
TCM_SERVICE_CRC_ERROR = R(0x05),
|
|
|
|
TCM_SNACK_REJECTED = R(0x06),
|
|
|
|
TCM_SECTOR_COUNT_TOO_MANY = R(0x07),
|
|
|
|
TCM_INVALID_CDB_FIELD = R(0x08),
|
|
|
|
TCM_INVALID_PARAMETER_LIST = R(0x09),
|
|
|
|
TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = R(0x0a),
|
|
|
|
TCM_UNKNOWN_MODE_PAGE = R(0x0b),
|
|
|
|
TCM_WRITE_PROTECTED = R(0x0c),
|
|
|
|
TCM_CHECK_CONDITION_ABORT_CMD = R(0x0d),
|
|
|
|
TCM_CHECK_CONDITION_UNIT_ATTENTION = R(0x0e),
|
|
|
|
TCM_CHECK_CONDITION_NOT_READY = R(0x0f),
|
|
|
|
TCM_RESERVATION_CONFLICT = R(0x10),
|
|
|
|
TCM_ADDRESS_OUT_OF_RANGE = R(0x11),
|
|
|
|
TCM_OUT_OF_RESOURCES = R(0x12),
|
2013-02-09 03:18:39 +04:00
|
|
|
TCM_PARAMETER_LIST_LENGTH_ERROR = R(0x13),
|
2013-08-20 02:10:38 +04:00
|
|
|
TCM_MISCOMPARE_VERIFY = R(0x14),
|
2014-01-08 03:39:33 +04:00
|
|
|
TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED = R(0x15),
|
|
|
|
TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED = R(0x16),
|
|
|
|
TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED = R(0x17),
|
2016-10-09 03:26:44 +03:00
|
|
|
TCM_COPY_TARGET_DEVICE_NOT_REACHABLE = R(0x18),
|
2016-12-23 13:37:53 +03:00
|
|
|
TCM_TOO_MANY_TARGET_DESCS = R(0x19),
|
|
|
|
TCM_UNSUPPORTED_TARGET_DESC_TYPE_CODE = R(0x1a),
|
|
|
|
TCM_TOO_MANY_SEGMENT_DESCS = R(0x1b),
|
|
|
|
TCM_UNSUPPORTED_SEGMENT_DESC_TYPE_CODE = R(0x1c),
|
2017-08-21 15:55:41 +03:00
|
|
|
TCM_INSUFFICIENT_REGISTRATION_RESOURCES = R(0x1d),
|
2017-12-19 13:03:55 +03:00
|
|
|
TCM_LUN_BUSY = R(0x1e),
|
2012-11-07 00:24:09 +04:00
|
|
|
#undef R
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
};
|
|
|
|
|
2011-11-19 08:36:22 +04:00
|
|
|
enum target_sc_flags_table {
|
|
|
|
TARGET_SCF_BIDI_OP = 0x01,
|
|
|
|
TARGET_SCF_ACK_KREF = 0x02,
|
2012-01-10 17:16:59 +04:00
|
|
|
TARGET_SCF_UNKNOWN_SIZE = 0x04,
|
2017-06-03 16:55:50 +03:00
|
|
|
TARGET_SCF_USE_CPUID = 0x08,
|
|
|
|
TARGET_SCF_LOOKUP_LUN_FROM_TAG = 0x10,
|
2011-11-19 08:36:22 +04:00
|
|
|
};
|
|
|
|
|
2011-11-16 18:46:48 +04:00
|
|
|
/* fabric independent task management function values */
|
|
|
|
enum tcm_tmreq_table {
|
|
|
|
TMR_ABORT_TASK = 1,
|
|
|
|
TMR_ABORT_TASK_SET = 2,
|
|
|
|
TMR_CLEAR_ACA = 3,
|
|
|
|
TMR_CLEAR_TASK_SET = 4,
|
|
|
|
TMR_LUN_RESET = 5,
|
|
|
|
TMR_TARGET_WARM_RESET = 6,
|
|
|
|
TMR_TARGET_COLD_RESET = 7,
|
2017-01-06 13:32:08 +03:00
|
|
|
TMR_UNKNOWN = 0xff,
|
2011-11-16 18:46:48 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
/* fabric independent task management response values */
|
|
|
|
enum tcm_tmrsp_table {
|
2013-10-16 11:12:54 +04:00
|
|
|
TMR_FUNCTION_FAILED = 0,
|
2013-07-03 19:22:16 +04:00
|
|
|
TMR_FUNCTION_COMPLETE = 1,
|
|
|
|
TMR_TASK_DOES_NOT_EXIST = 2,
|
|
|
|
TMR_LUN_DOES_NOT_EXIST = 3,
|
|
|
|
TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 4,
|
|
|
|
TMR_FUNCTION_REJECTED = 5,
|
2011-11-16 18:46:48 +04:00
|
|
|
};
|
|
|
|
|
2011-02-10 02:35:03 +03:00
|
|
|
/*
|
|
|
|
* Used for target SCSI statistics
|
|
|
|
*/
|
|
|
|
typedef enum {
|
|
|
|
SCSI_INST_INDEX,
|
|
|
|
SCSI_AUTH_INTR_INDEX,
|
|
|
|
SCSI_INDEX_TYPE_MAX
|
|
|
|
} scsi_index_t;
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_cmd;
|
|
|
|
|
2013-12-17 12:18:49 +04:00
|
|
|
struct t10_alua_lba_map_member {
|
|
|
|
struct list_head lba_map_mem_list;
|
|
|
|
int lba_map_mem_alua_state;
|
|
|
|
int lba_map_mem_alua_pg_id;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct t10_alua_lba_map {
|
|
|
|
u64 lba_map_first_lba;
|
|
|
|
u64 lba_map_last_lba;
|
|
|
|
struct list_head lba_map_list;
|
|
|
|
struct list_head lba_map_mem_list;
|
|
|
|
};
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct t10_alua {
|
|
|
|
/* ALUA Target Port Group ID */
|
|
|
|
u16 alua_tg_pt_gps_counter;
|
|
|
|
u32 alua_tg_pt_gps_count;
|
2013-12-17 12:18:49 +04:00
|
|
|
/* Referrals support */
|
|
|
|
spinlock_t lba_map_lock;
|
|
|
|
u32 lba_map_segment_size;
|
|
|
|
u32 lba_map_segment_multiplier;
|
|
|
|
struct list_head lba_map_list;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t tg_pt_gps_lock;
|
2012-10-08 08:03:19 +04:00
|
|
|
struct se_device *t10_dev;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used for default ALUA Target Port Group */
|
|
|
|
struct t10_alua_tg_pt_gp *default_tg_pt_gp;
|
|
|
|
/* Used for default ALUA Target Port Group ConfigFS group */
|
|
|
|
struct config_group alua_tg_pt_gps_group;
|
|
|
|
struct list_head tg_pt_gps_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct t10_alua_lu_gp {
|
|
|
|
u16 lu_gp_id;
|
|
|
|
int lu_gp_valid_id;
|
|
|
|
u32 lu_gp_members;
|
|
|
|
atomic_t lu_gp_ref_cnt;
|
|
|
|
spinlock_t lu_gp_lock;
|
|
|
|
struct config_group lu_gp_group;
|
2011-07-19 12:55:10 +04:00
|
|
|
struct list_head lu_gp_node;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head lu_gp_mem_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct t10_alua_lu_gp_member {
|
2011-03-14 14:06:01 +03:00
|
|
|
bool lu_gp_assoc;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
atomic_t lu_gp_mem_ref_cnt;
|
|
|
|
spinlock_t lu_gp_mem_lock;
|
|
|
|
struct t10_alua_lu_gp *lu_gp;
|
|
|
|
struct se_device *lu_gp_mem_dev;
|
|
|
|
struct list_head lu_gp_mem_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct t10_alua_tg_pt_gp {
|
|
|
|
u16 tg_pt_gp_id;
|
|
|
|
int tg_pt_gp_valid_id;
|
2013-11-19 12:07:49 +04:00
|
|
|
int tg_pt_gp_alua_supported_states;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
int tg_pt_gp_alua_access_status;
|
|
|
|
int tg_pt_gp_alua_access_type;
|
|
|
|
int tg_pt_gp_nonop_delay_msecs;
|
|
|
|
int tg_pt_gp_trans_delay_msecs;
|
2013-11-19 12:07:46 +04:00
|
|
|
int tg_pt_gp_implicit_trans_secs;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
int tg_pt_gp_pref;
|
|
|
|
int tg_pt_gp_write_metadata;
|
|
|
|
u32 tg_pt_gp_members;
|
2017-03-29 08:19:24 +03:00
|
|
|
int tg_pt_gp_alua_access_state;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
atomic_t tg_pt_gp_ref_cnt;
|
|
|
|
spinlock_t tg_pt_gp_lock;
|
2017-03-29 08:19:24 +03:00
|
|
|
struct mutex tg_pt_gp_transition_mutex;
|
2012-10-08 08:03:19 +04:00
|
|
|
struct se_device *tg_pt_gp_dev;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct config_group tg_pt_gp_group;
|
|
|
|
struct list_head tg_pt_gp_list;
|
2015-05-26 07:33:08 +03:00
|
|
|
struct list_head tg_pt_gp_lun_list;
|
|
|
|
struct se_lun *tg_pt_gp_alua_lun;
|
2013-12-17 12:18:46 +04:00
|
|
|
struct se_node_acl *tg_pt_gp_alua_nacl;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct t10_vpd {
|
|
|
|
unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
|
|
|
|
int protocol_identifier_set;
|
|
|
|
u32 protocol_identifier;
|
|
|
|
u32 device_identifier_code_set;
|
|
|
|
u32 association;
|
|
|
|
u32 device_identifier_type;
|
|
|
|
struct list_head vpd_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct t10_wwn {
|
2018-12-05 15:18:35 +03:00
|
|
|
/*
|
|
|
|
* SCSI left aligned strings may not be null terminated. +1 to ensure a
|
|
|
|
* null terminator is always present.
|
|
|
|
*/
|
|
|
|
char vendor[INQUIRY_VENDOR_LEN + 1];
|
|
|
|
char model[INQUIRY_MODEL_LEN + 1];
|
|
|
|
char revision[INQUIRY_REVISION_LEN + 1];
|
2011-07-19 12:55:10 +04:00
|
|
|
char unit_serial[INQUIRY_VPD_SERIAL_LEN];
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t t10_vpd_lock;
|
2012-10-08 08:03:19 +04:00
|
|
|
struct se_device *t10_dev;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct config_group t10_wwn_group;
|
|
|
|
struct list_head t10_vpd_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct t10_pr_registration {
|
|
|
|
/* Used for fabrics that contain WWN+ISID */
|
|
|
|
#define PR_REG_ISID_LEN 16
|
|
|
|
/* PR_REG_ISID_LEN + ',i,0x' */
|
|
|
|
#define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5)
|
|
|
|
char pr_reg_isid[PR_REG_ISID_LEN];
|
|
|
|
/* Used during APTPL metadata reading */
|
|
|
|
#define PR_APTPL_MAX_IPORT_LEN 256
|
|
|
|
unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
|
|
|
|
/* Used during APTPL metadata reading */
|
|
|
|
#define PR_APTPL_MAX_TPORT_LEN 256
|
|
|
|
unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
|
|
|
|
u16 pr_aptpl_rpti;
|
|
|
|
u16 pr_reg_tpgt;
|
|
|
|
/* Reservation effects all target ports */
|
|
|
|
int pr_reg_all_tg_pt;
|
|
|
|
/* Activate Persistence across Target Power Loss */
|
|
|
|
int pr_reg_aptpl;
|
|
|
|
int pr_res_holder;
|
|
|
|
int pr_res_type;
|
|
|
|
int pr_res_scope;
|
|
|
|
/* Used for fabric initiator WWPNs using a ISID */
|
2011-03-14 14:06:01 +03:00
|
|
|
bool isid_present_at_reg;
|
2015-06-10 09:41:22 +03:00
|
|
|
u64 pr_res_mapped_lun;
|
|
|
|
u64 pr_aptpl_target_lun;
|
2015-03-27 07:51:03 +03:00
|
|
|
u16 tg_pt_sep_rtpi;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u32 pr_res_generation;
|
|
|
|
u64 pr_reg_bin_isid;
|
|
|
|
u64 pr_res_key;
|
|
|
|
atomic_t pr_res_holders;
|
|
|
|
struct se_node_acl *pr_reg_nacl;
|
2015-03-27 07:51:03 +03:00
|
|
|
/* Used by ALL_TG_PT=1 registration with deve->pr_ref taken */
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_dev_entry *pr_reg_deve;
|
|
|
|
struct list_head pr_reg_list;
|
|
|
|
struct list_head pr_reg_abort_list;
|
|
|
|
struct list_head pr_reg_aptpl_list;
|
|
|
|
struct list_head pr_reg_atp_list;
|
|
|
|
struct list_head pr_reg_atp_mem_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2011-07-19 12:55:10 +04:00
|
|
|
struct t10_reservation {
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Reservation effects all target ports */
|
|
|
|
int pr_all_tg_pt;
|
|
|
|
/* Activate Persistence across Target Power Loss enabled
|
|
|
|
* for SCSI device */
|
|
|
|
int pr_aptpl_active;
|
2015-02-12 05:34:40 +03:00
|
|
|
#define PR_APTPL_BUF_LEN 262144
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u32 pr_generation;
|
|
|
|
spinlock_t registration_lock;
|
|
|
|
spinlock_t aptpl_reg_lock;
|
|
|
|
/*
|
|
|
|
* This will always be set by one individual I_T Nexus.
|
|
|
|
* However with all_tg_pt=1, other I_T Nexus from the
|
|
|
|
* same initiator can access PR reg/res info on a different
|
|
|
|
* target port.
|
|
|
|
*
|
|
|
|
* There is also the 'All Registrants' case, where there is
|
|
|
|
* a single *pr_res_holder of the reservation, but all
|
|
|
|
* registrations are considered reservation holders.
|
|
|
|
*/
|
|
|
|
struct se_node_acl *pr_res_holder;
|
|
|
|
struct list_head registration_list;
|
|
|
|
struct list_head aptpl_reg_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2012-01-20 01:39:17 +04:00
|
|
|
struct se_tmr_req {
|
|
|
|
/* Task Management function to be performed */
|
|
|
|
u8 function;
|
|
|
|
/* Task Management response to send */
|
|
|
|
u8 response;
|
|
|
|
int call_transport;
|
|
|
|
/* Reference to ITT that Task Mgmt should be performed */
|
2015-04-14 14:26:44 +03:00
|
|
|
u64 ref_task_tag;
|
2012-01-20 01:39:17 +04:00
|
|
|
void *fabric_tmr_ptr;
|
|
|
|
struct se_cmd *task_cmd;
|
|
|
|
struct se_device *tmr_dev;
|
|
|
|
struct list_head tmr_list;
|
|
|
|
};
|
|
|
|
|
2013-12-24 00:28:13 +04:00
|
|
|
enum target_prot_op {
|
2014-04-02 23:52:38 +04:00
|
|
|
TARGET_PROT_NORMAL = 0,
|
|
|
|
TARGET_PROT_DIN_INSERT = (1 << 0),
|
|
|
|
TARGET_PROT_DOUT_INSERT = (1 << 1),
|
|
|
|
TARGET_PROT_DIN_STRIP = (1 << 2),
|
|
|
|
TARGET_PROT_DOUT_STRIP = (1 << 3),
|
|
|
|
TARGET_PROT_DIN_PASS = (1 << 4),
|
|
|
|
TARGET_PROT_DOUT_PASS = (1 << 5),
|
2013-12-24 00:28:13 +04:00
|
|
|
};
|
|
|
|
|
2014-04-02 23:52:38 +04:00
|
|
|
#define TARGET_PROT_ALL TARGET_PROT_DIN_INSERT | TARGET_PROT_DOUT_INSERT | \
|
|
|
|
TARGET_PROT_DIN_STRIP | TARGET_PROT_DOUT_STRIP | \
|
|
|
|
TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS
|
|
|
|
|
2013-12-24 00:28:13 +04:00
|
|
|
enum target_prot_type {
|
|
|
|
TARGET_DIF_TYPE0_PROT,
|
|
|
|
TARGET_DIF_TYPE1_PROT,
|
|
|
|
TARGET_DIF_TYPE2_PROT,
|
|
|
|
TARGET_DIF_TYPE3_PROT,
|
|
|
|
};
|
|
|
|
|
2014-02-19 19:50:15 +04:00
|
|
|
enum target_core_dif_check {
|
|
|
|
TARGET_DIF_CHECK_GUARD = 0x1 << 0,
|
|
|
|
TARGET_DIF_CHECK_APPTAG = 0x1 << 1,
|
|
|
|
TARGET_DIF_CHECK_REFTAG = 0x1 << 2,
|
|
|
|
};
|
|
|
|
|
2014-11-24 18:07:25 +03:00
|
|
|
/* for sam_task_attr */
|
|
|
|
#define TCM_SIMPLE_TAG 0x20
|
|
|
|
#define TCM_HEAD_TAG 0x21
|
|
|
|
#define TCM_ORDERED_TAG 0x22
|
|
|
|
#define TCM_ACA_TAG 0x24
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_cmd {
|
|
|
|
/* SAM response code being sent to initiator */
|
|
|
|
u8 scsi_status;
|
|
|
|
u8 scsi_asc;
|
|
|
|
u8 scsi_ascq;
|
|
|
|
u16 scsi_sense_length;
|
2015-07-22 03:45:33 +03:00
|
|
|
unsigned unknown_data_length:1;
|
|
|
|
bool state_active:1;
|
2015-04-14 14:26:44 +03:00
|
|
|
u64 tag; /* SAM command identifier aka task tag */
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Delay for ALUA Active/NonOptimized state access in milliseconds */
|
|
|
|
int alua_nonop_delay;
|
|
|
|
/* See include/linux/dma-mapping.h */
|
|
|
|
enum dma_data_direction data_direction;
|
|
|
|
/* For SAM Task Attribute */
|
|
|
|
int sam_task_attr;
|
2013-06-08 04:38:58 +04:00
|
|
|
/* Used for se_sess->sess_tag_pool */
|
|
|
|
unsigned int map_tag;
|
2018-06-12 22:05:44 +03:00
|
|
|
int map_cpu;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Transport protocol dependent state, see transport_state_table */
|
|
|
|
enum transport_state_table t_state;
|
|
|
|
/* See se_cmd_flags_table */
|
|
|
|
u32 se_cmd_flags;
|
|
|
|
/* Total size in bytes associated with command */
|
|
|
|
u32 data_length;
|
|
|
|
u32 residual_count;
|
2015-06-10 09:41:22 +03:00
|
|
|
u64 orig_fe_lun;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Persistent Reservation key */
|
|
|
|
u64 pr_res_key;
|
|
|
|
/* Used for sense data */
|
|
|
|
void *sense_buffer;
|
2011-07-19 14:26:37 +04:00
|
|
|
struct list_head se_delayed_node;
|
2011-06-14 01:46:09 +04:00
|
|
|
struct list_head se_qf_node;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_device *se_dev;
|
|
|
|
struct se_lun *se_lun;
|
|
|
|
/* Only used for internal passthrough and legacy TCM fabric modules */
|
|
|
|
struct se_session *se_sess;
|
|
|
|
struct se_tmr_req *se_tmr_req;
|
2011-11-03 08:52:08 +04:00
|
|
|
struct list_head se_cmd_list;
|
2018-11-28 02:52:00 +03:00
|
|
|
struct completion *free_compl;
|
|
|
|
struct completion *abrt_compl;
|
2015-04-08 21:01:35 +03:00
|
|
|
const struct target_core_fabric_ops *se_tfo;
|
2012-11-07 00:24:09 +04:00
|
|
|
sense_reason_t (*execute_cmd)(struct se_cmd *);
|
2015-11-06 10:37:59 +03:00
|
|
|
sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool, int *);
|
2015-06-19 16:10:58 +03:00
|
|
|
void *protocol_data;
|
2011-06-14 01:46:09 +04:00
|
|
|
|
2011-05-03 04:12:10 +04:00
|
|
|
unsigned char *t_task_cdb;
|
|
|
|
unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
|
|
|
|
unsigned long long t_task_lba;
|
2013-08-20 10:57:30 +04:00
|
|
|
unsigned int t_task_nolb;
|
2011-12-21 23:13:47 +04:00
|
|
|
unsigned int transport_state;
|
|
|
|
#define CMD_T_ABORTED (1 << 0)
|
|
|
|
#define CMD_T_ACTIVE (1 << 1)
|
|
|
|
#define CMD_T_COMPLETE (1 << 2)
|
|
|
|
#define CMD_T_SENT (1 << 4)
|
|
|
|
#define CMD_T_STOP (1 << 5)
|
2016-01-20 02:23:02 +03:00
|
|
|
#define CMD_T_TAS (1 << 10)
|
|
|
|
#define CMD_T_FABRIC_STOP (1 << 11)
|
2011-05-03 04:12:10 +04:00
|
|
|
spinlock_t t_state_lock;
|
2015-07-22 03:45:33 +03:00
|
|
|
struct kref cmd_kref;
|
2011-05-03 04:12:10 +04:00
|
|
|
struct completion t_transport_stop_comp;
|
2011-07-20 23:13:28 +04:00
|
|
|
|
2011-10-17 21:56:53 +04:00
|
|
|
struct work_struct work;
|
|
|
|
|
2011-07-20 23:28:46 +04:00
|
|
|
struct scatterlist *t_data_sg;
|
2013-08-20 21:45:16 +04:00
|
|
|
struct scatterlist *t_data_sg_orig;
|
2011-07-20 23:28:46 +04:00
|
|
|
unsigned int t_data_nents;
|
2013-08-20 21:45:16 +04:00
|
|
|
unsigned int t_data_nents_orig;
|
2012-01-17 04:57:08 +04:00
|
|
|
void *t_data_vmap;
|
2011-07-20 23:28:46 +04:00
|
|
|
struct scatterlist *t_bidi_data_sg;
|
|
|
|
unsigned int t_bidi_data_nents;
|
|
|
|
|
2015-07-22 03:45:33 +03:00
|
|
|
/* Used for lun->lun_ref counting */
|
|
|
|
int lun_ref_active;
|
|
|
|
|
2012-04-24 08:25:05 +04:00
|
|
|
struct list_head state_list;
|
|
|
|
|
2012-04-24 08:25:06 +04:00
|
|
|
/* backend private data */
|
|
|
|
void *priv;
|
2013-11-07 09:03:43 +04:00
|
|
|
|
2013-12-24 00:28:13 +04:00
|
|
|
/* DIF related members */
|
|
|
|
enum target_prot_op prot_op;
|
|
|
|
enum target_prot_type prot_type;
|
2014-02-19 19:50:15 +04:00
|
|
|
u8 prot_checks;
|
2015-07-22 03:45:33 +03:00
|
|
|
bool prot_pto;
|
2013-12-24 00:28:13 +04:00
|
|
|
u32 prot_length;
|
|
|
|
u32 reftag_seed;
|
|
|
|
struct scatterlist *t_prot_sg;
|
|
|
|
unsigned int t_prot_nents;
|
|
|
|
sense_reason_t pi_err;
|
2014-01-23 21:29:38 +04:00
|
|
|
sector_t bad_sector;
|
2015-12-17 22:57:06 +03:00
|
|
|
int cpuid;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_ua {
|
|
|
|
u8 ua_asc;
|
|
|
|
u8 ua_ascq;
|
|
|
|
struct list_head ua_nacl_list;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_node_acl {
|
|
|
|
char initiatorname[TRANSPORT_IQN_LEN];
|
|
|
|
/* Used to signal demo mode created ACL, disabled by default */
|
2011-03-14 14:06:01 +03:00
|
|
|
bool dynamic_node_acl;
|
2016-12-07 23:55:54 +03:00
|
|
|
bool dynamic_stop;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u32 queue_depth;
|
|
|
|
u32 acl_index;
|
2015-04-14 21:52:22 +03:00
|
|
|
enum target_prot_type saved_prot_type;
|
2012-12-12 04:30:53 +04:00
|
|
|
#define MAX_ACL_TAG_SIZE 64
|
|
|
|
char acl_tag[MAX_ACL_TAG_SIZE];
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
|
|
|
|
atomic_t acl_pr_ref_count;
|
2015-03-23 06:42:19 +03:00
|
|
|
struct hlist_head lun_entry_hlist;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_session *nacl_sess;
|
|
|
|
struct se_portal_group *se_tpg;
|
2015-03-23 06:42:19 +03:00
|
|
|
struct mutex lun_entry_mutex;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t nacl_sess_lock;
|
|
|
|
struct config_group acl_group;
|
|
|
|
struct config_group acl_attrib_group;
|
|
|
|
struct config_group acl_auth_group;
|
|
|
|
struct config_group acl_param_group;
|
2011-03-14 14:06:11 +03:00
|
|
|
struct config_group acl_fabric_stat_group;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head acl_list;
|
|
|
|
struct list_head acl_sess_list;
|
2012-03-11 02:32:52 +04:00
|
|
|
struct completion acl_free_comp;
|
2012-03-09 11:45:02 +04:00
|
|
|
struct kref acl_kref;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2015-10-03 16:32:55 +03:00
|
|
|
static inline struct se_node_acl *acl_to_nacl(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_node_acl,
|
|
|
|
acl_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_node_acl *attrib_to_nacl(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_node_acl,
|
|
|
|
acl_attrib_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_node_acl *auth_to_nacl(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_node_acl,
|
|
|
|
acl_auth_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_node_acl *param_to_nacl(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_node_acl,
|
|
|
|
acl_param_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_node_acl *fabric_stat_to_nacl(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_node_acl,
|
|
|
|
acl_fabric_stat_group);
|
|
|
|
}
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_session {
|
2011-11-08 23:46:29 +04:00
|
|
|
unsigned sess_tearing_down:1;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u64 sess_bin_isid;
|
2014-04-02 23:52:38 +04:00
|
|
|
enum target_prot_op sup_prot_ops;
|
2015-02-28 09:05:21 +03:00
|
|
|
enum target_prot_type sess_prot_type;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_node_acl *se_node_acl;
|
|
|
|
struct se_portal_group *se_tpg;
|
|
|
|
void *fabric_sess_ptr;
|
2018-11-28 02:51:58 +03:00
|
|
|
struct percpu_ref cmd_count;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head sess_list;
|
|
|
|
struct list_head sess_acl_list;
|
2011-11-03 08:52:08 +04:00
|
|
|
struct list_head sess_cmd_list;
|
|
|
|
spinlock_t sess_cmd_lock;
|
2018-06-23 00:52:53 +03:00
|
|
|
wait_queue_head_t cmd_list_wq;
|
2013-06-08 04:38:58 +04:00
|
|
|
void *sess_cmd_map;
|
2018-06-12 22:05:44 +03:00
|
|
|
struct sbitmap_queue sess_tag_pool;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_device;
|
|
|
|
struct se_transform_info;
|
|
|
|
struct scatterlist;
|
|
|
|
|
2011-03-14 14:06:11 +03:00
|
|
|
struct se_ml_stat_grps {
|
|
|
|
struct config_group stat_group;
|
|
|
|
struct config_group scsi_auth_intr_group;
|
|
|
|
struct config_group scsi_att_intr_port_group;
|
|
|
|
};
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_lun_acl {
|
2015-06-10 09:41:22 +03:00
|
|
|
u64 mapped_lun;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_node_acl *se_lun_nacl;
|
|
|
|
struct se_lun *se_lun;
|
|
|
|
struct config_group se_lun_group;
|
2011-03-14 14:06:11 +03:00
|
|
|
struct se_ml_stat_grps ml_stat_grps;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_dev_entry {
|
2015-06-10 09:41:22 +03:00
|
|
|
u64 mapped_lun;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u64 pr_res_key;
|
|
|
|
u64 creation_time;
|
2016-02-26 02:14:32 +03:00
|
|
|
bool lun_access_ro;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u32 attach_count;
|
2015-03-23 06:42:19 +03:00
|
|
|
atomic_long_t total_cmds;
|
|
|
|
atomic_long_t read_bytes;
|
|
|
|
atomic_long_t write_bytes;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
|
2015-03-23 06:42:19 +03:00
|
|
|
struct kref pr_kref;
|
|
|
|
struct completion pr_comp;
|
|
|
|
struct se_lun_acl __rcu *se_lun_acl;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t ua_lock;
|
2015-03-23 06:42:19 +03:00
|
|
|
struct se_lun __rcu *se_lun;
|
2015-03-25 11:02:57 +03:00
|
|
|
#define DEF_PR_REG_ACTIVE 1
|
|
|
|
unsigned long deve_flags;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head alua_port_list;
|
2015-05-26 07:33:08 +03:00
|
|
|
struct list_head lun_link;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head ua_list;
|
2015-03-23 06:42:19 +03:00
|
|
|
struct hlist_node link;
|
|
|
|
struct rcu_head rcu_head;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_dev_attrib {
|
2013-02-01 02:30:24 +04:00
|
|
|
int emulate_model_alias;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
int emulate_dpo;
|
|
|
|
int emulate_fua_write;
|
|
|
|
int emulate_fua_read;
|
|
|
|
int emulate_write_cache;
|
|
|
|
int emulate_ua_intlck_ctrl;
|
|
|
|
int emulate_tas;
|
|
|
|
int emulate_tpu;
|
|
|
|
int emulate_tpws;
|
2013-08-21 01:24:09 +04:00
|
|
|
int emulate_caw;
|
2013-08-23 01:17:20 +04:00
|
|
|
int emulate_3pc;
|
2018-11-07 16:11:07 +03:00
|
|
|
int emulate_pr;
|
2013-12-24 00:28:13 +04:00
|
|
|
enum target_prot_type pi_prot_type;
|
|
|
|
enum target_prot_type hw_pi_prot_type;
|
2017-03-31 18:53:36 +03:00
|
|
|
int pi_prot_verify;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
int enforce_pr_isids;
|
2014-10-04 05:06:08 +04:00
|
|
|
int force_pr_aptpl;
|
2011-07-06 00:34:52 +04:00
|
|
|
int is_nonrot;
|
2011-07-17 13:57:58 +04:00
|
|
|
int emulate_rest_reord;
|
2015-11-30 01:44:57 +03:00
|
|
|
int unmap_zeroes_data;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
u32 hw_block_size;
|
|
|
|
u32 block_size;
|
|
|
|
u32 hw_max_sectors;
|
|
|
|
u32 optimal_sectors;
|
|
|
|
u32 hw_queue_depth;
|
|
|
|
u32 queue_depth;
|
|
|
|
u32 max_unmap_lba_count;
|
|
|
|
u32 max_unmap_block_desc_count;
|
|
|
|
u32 unmap_granularity;
|
|
|
|
u32 unmap_granularity_alignment;
|
2012-11-15 23:02:49 +04:00
|
|
|
u32 max_write_same_len;
|
2013-12-13 00:24:11 +04:00
|
|
|
u32 max_bytes_per_io;
|
2012-10-08 08:03:19 +04:00
|
|
|
struct se_device *da_dev;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct config_group da_group;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2013-11-09 01:10:44 +04:00
|
|
|
struct se_port_stat_grps {
|
|
|
|
struct config_group stat_group;
|
|
|
|
struct config_group scsi_port_group;
|
|
|
|
struct config_group scsi_tgt_port_group;
|
|
|
|
struct config_group scsi_transport_group;
|
|
|
|
};
|
|
|
|
|
2015-05-26 07:33:08 +03:00
|
|
|
struct scsi_port_stats {
|
2015-05-19 10:03:07 +03:00
|
|
|
atomic_long_t cmd_pdus;
|
|
|
|
atomic_long_t tx_data_octets;
|
|
|
|
atomic_long_t rx_data_octets;
|
2015-05-26 07:33:08 +03:00
|
|
|
};
|
|
|
|
|
2013-11-09 01:10:44 +04:00
|
|
|
struct se_lun {
|
2015-06-10 09:41:22 +03:00
|
|
|
u64 unpacked_lun;
|
2017-03-28 02:12:43 +03:00
|
|
|
bool lun_shutdown;
|
2016-02-26 02:14:32 +03:00
|
|
|
bool lun_access_ro;
|
2015-03-23 06:42:19 +03:00
|
|
|
u32 lun_index;
|
2015-06-10 09:41:22 +03:00
|
|
|
|
|
|
|
/* RELATIVE TARGET PORT IDENTIFER */
|
|
|
|
u16 lun_rtpi;
|
2013-11-09 01:10:44 +04:00
|
|
|
atomic_t lun_acl_count;
|
2015-05-26 07:33:08 +03:00
|
|
|
struct se_device __rcu *lun_se_dev;
|
|
|
|
|
|
|
|
struct list_head lun_deve_list;
|
|
|
|
spinlock_t lun_deve_lock;
|
|
|
|
|
|
|
|
/* ALUA state */
|
|
|
|
int lun_tg_pt_secondary_stat;
|
|
|
|
int lun_tg_pt_secondary_write_md;
|
|
|
|
atomic_t lun_tg_pt_secondary_offline;
|
|
|
|
struct mutex lun_tg_pt_md_mutex;
|
|
|
|
|
|
|
|
/* ALUA target port group linkage */
|
|
|
|
struct list_head lun_tg_pt_gp_link;
|
|
|
|
struct t10_alua_tg_pt_gp *lun_tg_pt_gp;
|
|
|
|
spinlock_t lun_tg_pt_gp_lock;
|
|
|
|
|
|
|
|
struct se_portal_group *lun_tpg;
|
|
|
|
struct scsi_port_stats lun_stats;
|
2013-11-09 01:10:44 +04:00
|
|
|
struct config_group lun_group;
|
|
|
|
struct se_port_stat_grps port_stat_grps;
|
target: Fix NULL dereference during LUN lookup + active I/O shutdown
When transport_clear_lun_ref() is shutting down a se_lun via
configfs with new I/O in-flight, it's possible to trigger a
NULL pointer dereference in transport_lookup_cmd_lun() due
to the fact percpu_ref_get() doesn't do any __PERCPU_REF_DEAD
checking before incrementing lun->lun_ref.count after
lun->lun_ref has switched to atomic_t mode.
This results in a NULL pointer dereference as LUN shutdown
code in core_tpg_remove_lun() continues running after the
existing ->release() -> core_tpg_lun_ref_release() callback
completes, and clears the RCU protected se_lun->lun_se_dev
pointer.
During the OOPs, the state of lun->lun_ref in the process
which triggered the NULL pointer dereference looks like
the following on v4.1.y stable code:
struct se_lun {
lun_link_magic = 4294932337,
lun_status = TRANSPORT_LUN_STATUS_FREE,
.....
lun_se_dev = 0x0,
lun_sep = 0x0,
.....
lun_ref = {
count = {
counter = 1
},
percpu_count_ptr = 3,
release = 0xffffffffa02fa1e0 <core_tpg_lun_ref_release>,
confirm_switch = 0x0,
force_atomic = false,
rcu = {
next = 0xffff88154fa1a5d0,
func = 0xffffffff8137c4c0 <percpu_ref_switch_to_atomic_rcu>
}
}
}
To address this bug, use percpu_ref_tryget_live() to ensure
once __PERCPU_REF_DEAD is visable on all CPUs and ->lun_ref
has switched to atomic_t, all new I/Os will fail to obtain
a new lun->lun_ref reference.
Also use an explicit percpu_ref_kill_and_confirm() callback
to block on ->lun_ref_comp to allow the first stage and
associated RCU grace period to complete, and then block on
->lun_ref_shutdown waiting for the final percpu_ref_put()
to drop the last reference via transport_lun_remove_cmd()
before continuing with core_tpg_remove_lun() shutdown.
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Tested-by: Vaibhav Tandon <vst@datera.io>
Cc: Vaibhav Tandon <vst@datera.io>
Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-02-23 09:06:32 +03:00
|
|
|
struct completion lun_shutdown_comp;
|
2013-11-09 01:10:44 +04:00
|
|
|
struct percpu_ref lun_ref;
|
2015-05-26 07:33:08 +03:00
|
|
|
struct list_head lun_dev_link;
|
2015-05-11 05:31:10 +03:00
|
|
|
struct hlist_node link;
|
|
|
|
struct rcu_head rcu_head;
|
2013-11-09 01:10:44 +04:00
|
|
|
};
|
|
|
|
|
2011-03-14 14:06:11 +03:00
|
|
|
struct se_dev_stat_grps {
|
|
|
|
struct config_group stat_group;
|
|
|
|
struct config_group scsi_dev_group;
|
|
|
|
struct config_group scsi_tgt_dev_group;
|
|
|
|
struct config_group scsi_lu_group;
|
|
|
|
};
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_device {
|
|
|
|
/* RELATIVE TARGET PORT IDENTIFER Counter */
|
|
|
|
u16 dev_rpti_counter;
|
|
|
|
/* Used for SAM Task Attribute ordering */
|
|
|
|
u32 dev_cur_ordered_id;
|
|
|
|
u32 dev_flags;
|
2012-10-08 08:03:19 +04:00
|
|
|
#define DF_CONFIGURED 0x00000001
|
|
|
|
#define DF_FIRMWARE_VPD_UNIT_SERIAL 0x00000002
|
|
|
|
#define DF_EMULATED_VPD_UNIT_SERIAL 0x00000004
|
|
|
|
#define DF_USING_UDEV_PATH 0x00000008
|
|
|
|
#define DF_USING_ALIAS 0x00000010
|
2015-09-16 03:27:35 +03:00
|
|
|
#define DF_READ_ONLY 0x00000020
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Physical device queue depth */
|
|
|
|
u32 queue_depth;
|
|
|
|
/* Used for SPC-2 reservations enforce of ISIDs */
|
|
|
|
u64 dev_res_bin_isid;
|
|
|
|
/* Pointer to transport specific device structure */
|
|
|
|
u32 dev_index;
|
|
|
|
u64 creation_time;
|
2013-11-14 06:34:55 +04:00
|
|
|
atomic_long_t num_resets;
|
2017-01-20 02:45:57 +03:00
|
|
|
atomic_long_t aborts_complete;
|
|
|
|
atomic_long_t aborts_no_task;
|
2013-11-14 06:34:55 +04:00
|
|
|
atomic_long_t num_cmds;
|
|
|
|
atomic_long_t read_bytes;
|
|
|
|
atomic_long_t write_bytes;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Active commands on this virtual SE device */
|
|
|
|
atomic_t simple_cmds;
|
|
|
|
atomic_t dev_ordered_sync;
|
2011-06-14 01:46:09 +04:00
|
|
|
atomic_t dev_qf_count;
|
2015-05-26 07:33:08 +03:00
|
|
|
u32 export_count;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t delayed_cmd_lock;
|
|
|
|
spinlock_t execute_task_lock;
|
|
|
|
spinlock_t dev_reservation_lock;
|
2012-10-08 08:03:19 +04:00
|
|
|
unsigned int dev_reservation_flags;
|
|
|
|
#define DRF_SPC2_RESERVATIONS 0x00000001
|
|
|
|
#define DRF_SPC2_RESERVATIONS_WITH_ISID 0x00000002
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t se_port_lock;
|
|
|
|
spinlock_t se_tmr_lock;
|
2011-06-14 01:46:09 +04:00
|
|
|
spinlock_t qf_cmd_lock;
|
2013-08-20 02:20:28 +04:00
|
|
|
struct semaphore caw_sem;
|
2019-04-02 22:58:06 +03:00
|
|
|
/* Used for legacy SPC-2 reservations */
|
|
|
|
struct se_session *reservation_holder;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used for ALUA Logical Unit Group membership */
|
|
|
|
struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
|
|
|
|
/* Used for SPC-3 Persistent Reservations */
|
|
|
|
struct t10_pr_registration *dev_pr_res_holder;
|
|
|
|
struct list_head dev_sep_list;
|
|
|
|
struct list_head dev_tmr_list;
|
2011-06-14 01:46:09 +04:00
|
|
|
struct work_struct qf_work_queue;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head delayed_cmd_list;
|
2012-04-24 08:25:05 +04:00
|
|
|
struct list_head state_list;
|
2011-06-14 01:46:09 +04:00
|
|
|
struct list_head qf_cmd_list;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Pointer to associated SE HBA */
|
|
|
|
struct se_hba *se_hba;
|
2012-10-08 08:03:19 +04:00
|
|
|
/* T10 Inquiry and VPD WWN Information */
|
|
|
|
struct t10_wwn t10_wwn;
|
|
|
|
/* T10 Asymmetric Logical Unit Assignment for Target Ports */
|
|
|
|
struct t10_alua t10_alua;
|
|
|
|
/* T10 SPC-2 + SPC-3 Reservations */
|
|
|
|
struct t10_reservation t10_pr;
|
|
|
|
struct se_dev_attrib dev_attrib;
|
2017-12-19 13:03:57 +03:00
|
|
|
struct config_group dev_action_group;
|
2012-10-08 08:03:19 +04:00
|
|
|
struct config_group dev_group;
|
|
|
|
struct config_group dev_pr_group;
|
|
|
|
struct se_dev_stat_grps dev_stat_grps;
|
|
|
|
#define SE_DEV_ALIAS_LEN 512 /* must be less than PAGE_SIZE */
|
|
|
|
unsigned char dev_alias[SE_DEV_ALIAS_LEN];
|
|
|
|
#define SE_UDEV_PATH_LEN 512 /* must be less than PAGE_SIZE */
|
|
|
|
unsigned char udev_path[SE_UDEV_PATH_LEN];
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Pointer to template of function pointers for transport */
|
2015-05-10 19:14:56 +03:00
|
|
|
const struct target_backend_ops *transport;
|
2013-11-09 01:10:44 +04:00
|
|
|
struct se_lun xcopy_lun;
|
2013-12-24 00:28:13 +04:00
|
|
|
/* Protection Information */
|
|
|
|
int prot_length;
|
2015-05-19 10:03:07 +03:00
|
|
|
/* For se_lun->lun_se_dev RCU read-side critical access */
|
|
|
|
u32 hba_index;
|
|
|
|
struct rcu_head rcu_head;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_hba {
|
|
|
|
u16 hba_tpgt;
|
|
|
|
u32 hba_id;
|
|
|
|
/* See hba_flags_table */
|
|
|
|
u32 hba_flags;
|
|
|
|
/* Virtual iSCSI devices attached. */
|
|
|
|
u32 dev_count;
|
|
|
|
u32 hba_index;
|
|
|
|
/* Pointer to transport specific host structure. */
|
|
|
|
void *hba_ptr;
|
2011-07-19 12:55:10 +04:00
|
|
|
struct list_head hba_node;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
spinlock_t device_lock;
|
|
|
|
struct config_group hba_group;
|
|
|
|
struct mutex hba_access_mutex;
|
2015-05-10 19:14:56 +03:00
|
|
|
struct target_backend *backend;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
|
|
|
struct se_tpg_np {
|
2011-02-10 02:34:54 +03:00
|
|
|
struct se_portal_group *tpg_np_parent;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct config_group tpg_np_group;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2015-10-03 16:32:55 +03:00
|
|
|
static inline struct se_tpg_np *to_tpg_np(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_tpg_np,
|
|
|
|
tpg_np_group);
|
|
|
|
}
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_portal_group {
|
2015-05-01 18:47:56 +03:00
|
|
|
/*
|
|
|
|
* PROTOCOL IDENTIFIER value per SPC4, 7.5.1.
|
|
|
|
*
|
|
|
|
* Negative values can be used by fabric drivers for internal use TPGs.
|
|
|
|
*/
|
|
|
|
int proto_id;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
|
|
|
|
atomic_t tpg_pr_ref_count;
|
|
|
|
/* Spinlock for adding/removing ACLed Nodes */
|
2015-03-09 01:33:47 +03:00
|
|
|
struct mutex acl_node_mutex;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* Spinlock for adding/removing sessions */
|
|
|
|
spinlock_t session_lock;
|
2015-05-11 05:31:10 +03:00
|
|
|
struct mutex tpg_lun_mutex;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
/* linked list for initiator ACL list */
|
|
|
|
struct list_head acl_node_list;
|
2015-05-11 05:31:10 +03:00
|
|
|
struct hlist_head tpg_lun_hlist;
|
2015-05-26 07:33:08 +03:00
|
|
|
struct se_lun *tpg_virt_lun0;
|
2011-03-31 05:57:33 +04:00
|
|
|
/* List of TCM sessions associated wth this TPG */
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct list_head tpg_sess_list;
|
|
|
|
/* Pointer to $FABRIC_MOD dependent code */
|
2015-04-08 21:01:35 +03:00
|
|
|
const struct target_core_fabric_ops *se_tpg_tfo;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_wwn *se_tpg_wwn;
|
|
|
|
struct config_group tpg_group;
|
|
|
|
struct config_group tpg_lun_group;
|
|
|
|
struct config_group tpg_np_group;
|
|
|
|
struct config_group tpg_acl_group;
|
|
|
|
struct config_group tpg_attrib_group;
|
2013-06-20 05:37:00 +04:00
|
|
|
struct config_group tpg_auth_group;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct config_group tpg_param_group;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2015-10-03 16:32:55 +03:00
|
|
|
static inline struct se_portal_group *to_tpg(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_portal_group,
|
|
|
|
tpg_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_portal_group *attrib_to_tpg(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_portal_group,
|
|
|
|
tpg_attrib_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_portal_group *auth_to_tpg(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_portal_group,
|
|
|
|
tpg_auth_group);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct se_portal_group *param_to_tpg(struct config_item *item)
|
|
|
|
{
|
|
|
|
return container_of(to_config_group(item), struct se_portal_group,
|
|
|
|
tpg_param_group);
|
|
|
|
}
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct se_wwn {
|
|
|
|
struct target_fabric_configfs *wwn_tf;
|
2016-12-09 22:00:33 +03:00
|
|
|
void *priv;
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
struct config_group wwn_group;
|
2011-03-14 14:06:11 +03:00
|
|
|
struct config_group fabric_stat_group;
|
2011-11-29 12:29:38 +04:00
|
|
|
};
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
|
2014-09-17 00:23:12 +04:00
|
|
|
static inline void atomic_inc_mb(atomic_t *v)
|
|
|
|
{
|
|
|
|
smp_mb__before_atomic();
|
|
|
|
atomic_inc(v);
|
|
|
|
smp_mb__after_atomic();
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void atomic_dec_mb(atomic_t *v)
|
|
|
|
{
|
|
|
|
smp_mb__before_atomic();
|
|
|
|
atomic_dec(v);
|
|
|
|
smp_mb__after_atomic();
|
|
|
|
}
|
|
|
|
|
2018-06-12 22:05:43 +03:00
|
|
|
static inline void target_free_tag(struct se_session *sess, struct se_cmd *cmd)
|
|
|
|
{
|
2018-06-12 22:05:44 +03:00
|
|
|
sbitmap_queue_clear(&sess->sess_tag_pool, cmd->map_tag, cmd->map_cpu);
|
2018-06-12 22:05:43 +03:00
|
|
|
}
|
|
|
|
|
[SCSI] target: Add LIO target core v4.0.0-rc6
LIO target is a full featured in-kernel target framework with the
following feature set:
High-performance, non-blocking, multithreaded architecture with SIMD
support.
Advanced SCSI feature set:
* Persistent Reservations (PRs)
* Asymmetric Logical Unit Assignment (ALUA)
* Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
* Full Error Recovery (ERL=0,1,2)
* Active/active task migration and session continuation (ERL=2)
* Thin LUN provisioning (UNMAP and WRITE_SAMExx)
Multiprotocol target plugins
Storage media independence:
* Virtualization of all storage media; transparent mapping of IO to LUNs
* No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
* Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.
Standards compliance:
* Full compliance with IETF (RFC 3720)
* Full implementation of SPC-4 PRs and ALUA
Significant code cleanups done by Christoph Hellwig.
[jejb: fix up for new block bdev exclusive interface. Minor fixes from
Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 22:11:26 +03:00
|
|
|
#endif /* TARGET_CORE_BASE_H */
|