WSL2-Linux-Kernel/drivers/acpi/osl.c

1866 строки
43 KiB
C
Исходник Обычный вид История

/*
* acpi_osl.c - OS-dependent functions ($Revision: 83 $)
*
* Copyright (C) 2000 Andrew Henroid
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (c) 2008 Intel Corporation
* Author: Matthew Wilcox <willy@linux.intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
#include <linux/efi.h>
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/jiffies.h>
#include <linux/semaphore.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include "internal.h"
#define _COMPONENT ACPI_OS_SERVICES
ACPI_MODULE_NAME("osl");
#define PREFIX "ACPI: "
struct acpi_os_dpc {
acpi_osd_exec_callback function;
void *context;
2006-11-22 17:55:48 +03:00
struct work_struct work;
};
#ifdef CONFIG_ACPI_CUSTOM_DSDT
#include CONFIG_ACPI_CUSTOM_DSDT_FILE
#endif
#ifdef ENABLE_DEBUGGER
#include <linux/kdb.h>
/* stuff for debugger support */
int acpi_in_debugger;
EXPORT_SYMBOL(acpi_in_debugger);
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER */
static int (*__acpi_os_prepare_sleep)(u8 sleep_state, u32 pm1a_ctrl,
u32 pm1b_ctrl);
static int (*__acpi_os_prepare_extended_sleep)(u8 sleep_state, u32 val_a,
u32 val_b);
static acpi_osd_handler acpi_irq_handler;
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-10 07:31:03 +04:00
static struct workqueue_struct *kacpi_notify_wq;
static struct workqueue_struct *kacpi_hotplug_wq;
/*
* This list of permanent mappings is for memory that may be accessed from
* interrupt context, where we can't do the ioremap().
*/
struct acpi_ioremap {
struct list_head list;
void __iomem *virt;
acpi_physical_address phys;
acpi_size size;
unsigned long refcount;
};
static LIST_HEAD(acpi_ioremaps);
static DEFINE_MUTEX(acpi_ioremap_lock);
static void __init acpi_osi_setup_late(void);
/*
* The story of _OSI(Linux)
*
* From pre-history through Linux-2.6.22,
* Linux responded TRUE upon a BIOS OSI(Linux) query.
*
* Unfortunately, reference BIOS writers got wind of this
* and put OSI(Linux) in their example code, quickly exposing
* this string as ill-conceived and opening the door to
* an un-bounded number of BIOS incompatibilities.
*
* For example, OSI(Linux) was used on resume to re-POST a
* video card on one system, because Linux at that time
* could not do a speedy restore in its native driver.
* But then upon gaining quick native restore capability,
* Linux has no way to tell the BIOS to skip the time-consuming
* POST -- putting Linux at a permanent performance disadvantage.
* On another system, the BIOS writer used OSI(Linux)
* to infer native OS support for IPMI! On other systems,
* OSI(Linux) simply got in the way of Linux claiming to
* be compatible with other operating systems, exposing
* BIOS issues such as skipped device initialization.
*
* So "Linux" turned out to be a really poor chose of
* OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
* Linux will complain on the console when it sees it, and return FALSE.
* To get Linux to return TRUE for your system will require
* a kernel source update to add a DMI entry,
* or boot with "acpi_osi=Linux"
*/
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
ACPI: Add facility to disable all _OSI OS vendor strings This patch introduces "acpi_osi=!" command line to force Linux replying "UNSUPPORTED" to all of the _OSI strings. This patch is based on an ACPICA enhancement - the new API acpi_update_interfaces(). The _OSI object provides the platform with the ability to query OSPM to determine the set of ACPI related interfaces, behaviors, or features that the operating system supports. The argument passed to the _OSI is a string like the followings: 1. Feature Group String, examples include Module Device Processor Device 3.0 _SCP Extensions Processor Aggregator Device ... 2. OS Vendor String, examples include Linux FreeBSD Windows ... There are AML codes provided in the ACPI namespace written in the following style to determine OSPM interfaces / features: Method(OSCK) { if (CondRefOf(_OSI, Local0)) { if (\_OSI("Windows")) { Return (One) } if (\_OSI("Windows 2006")) { Return (Ones) } Return (Zero) } Return (Zero) } There is a debugging facility implemented in Linux. Users can pass "acpi_osi=" boot parameters to the kernel to tune the _OSI evaluation result so that certain AML codes can be executed. Current implementation includes: 1. 'acpi_osi=' - this makes CondRefOf(_OSI, Local0) TRUE 2. 'acpi_osi="Windows"' - this makes \_OSI("Windows") TRUE 3. 'acpi_osi="!Windows"' - this makes \_OSI("Windows") FALSE The function to implement this feature is also used as a quirk mechanism in the Linux ACPI subystem. When _OSI is evaluatated by the AML codes, ACPICA replies "SUPPORTED" to all Windows operating system vendor strings. This is because Windows operating systems return "SUPPORTED" if the argument to the _OSI method specifies an earlier version of Windows. Please refer to the following MSDN document: How to Identify the Windows Version in ACPI by Using _OSI http://msdn.microsoft.com/en-us/library/hardware/gg463275.aspx This adds difficulties when developers want to feed specific Windows operating system vendor string to the BIOS codes for debugging purpose, multiple acpi_osi="!xxx" have to be specified in the command line to force Linux replying "UNSUPPORTED" to the Windows OS vendor strings listed in the AML codes. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-22 12:08:25 +04:00
unsigned int default_disabling:1;
} osi_linux = {0, 0, 0, 0};
static u32 acpi_osi_handler(acpi_string interface, u32 supported)
{
if (!strcmp("Linux", interface)) {
printk_once(KERN_NOTICE FW_BUG PREFIX
"BIOS _OSI(Linux) query %s%s\n",
osi_linux.enable ? "honored" : "ignored",
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
}
return supported;
}
static void __init acpi_request_region (struct acpi_generic_address *gas,
unsigned int length, char *desc)
{
u64 addr;
/* Handle possible alignment issues */
memcpy(&addr, &gas->address, sizeof(addr));
if (!addr || !length)
return;
/* Resources are never freed */
if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
request_region(addr, length, desc);
else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
request_mem_region(addr, length, desc);
}
static int __init acpi_reserve_resources(void)
{
acpi_request_region(&acpi_gbl_FADT.xpm1a_event_block, acpi_gbl_FADT.pm1_event_length,
"ACPI PM1a_EVT_BLK");
acpi_request_region(&acpi_gbl_FADT.xpm1b_event_block, acpi_gbl_FADT.pm1_event_length,
"ACPI PM1b_EVT_BLK");
acpi_request_region(&acpi_gbl_FADT.xpm1a_control_block, acpi_gbl_FADT.pm1_control_length,
"ACPI PM1a_CNT_BLK");
acpi_request_region(&acpi_gbl_FADT.xpm1b_control_block, acpi_gbl_FADT.pm1_control_length,
"ACPI PM1b_CNT_BLK");
if (acpi_gbl_FADT.pm_timer_length == 4)
acpi_request_region(&acpi_gbl_FADT.xpm_timer_block, 4, "ACPI PM_TMR");
acpi_request_region(&acpi_gbl_FADT.xpm2_control_block, acpi_gbl_FADT.pm2_control_length,
"ACPI PM2_CNT_BLK");
/* Length of GPE blocks must be a non-negative multiple of 2 */
if (!(acpi_gbl_FADT.gpe0_block_length & 0x1))
acpi_request_region(&acpi_gbl_FADT.xgpe0_block,
acpi_gbl_FADT.gpe0_block_length, "ACPI GPE0_BLK");
if (!(acpi_gbl_FADT.gpe1_block_length & 0x1))
acpi_request_region(&acpi_gbl_FADT.xgpe1_block,
acpi_gbl_FADT.gpe1_block_length, "ACPI GPE1_BLK");
return 0;
}
device_initcall(acpi_reserve_resources);
void acpi_os_printf(const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
acpi_os_vprintf(fmt, args);
va_end(args);
}
void acpi_os_vprintf(const char *fmt, va_list args)
{
static char buffer[512];
vsprintf(buffer, fmt, args);
#ifdef ENABLE_DEBUGGER
if (acpi_in_debugger) {
kdb_printf("%s", buffer);
} else {
printk(KERN_CONT "%s", buffer);
}
#else
printk(KERN_CONT "%s", buffer);
#endif
}
#ifdef CONFIG_KEXEC
static unsigned long acpi_rsdp;
static int __init setup_acpi_rsdp(char *arg)
{
acpi_rsdp = simple_strtoul(arg, NULL, 16);
return 0;
}
early_param("acpi_rsdp", setup_acpi_rsdp);
#endif
acpi_physical_address __init acpi_os_get_root_pointer(void)
{
#ifdef CONFIG_KEXEC
if (acpi_rsdp)
return acpi_rsdp;
#endif
efi: Make 'efi_enabled' a function to query EFI facilities Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Cc: David Airlie <airlied@linux.ie> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Peter Jones <pjones@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 13:42:35 +04:00
if (efi_enabled(EFI_CONFIG_TABLES)) {
if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
return efi.acpi20;
else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
return efi.acpi;
else {
printk(KERN_ERR PREFIX
"System description tables not found\n");
return 0;
}
} else {
acpi_physical_address pa = 0;
acpi_find_root_pointer(&pa);
return pa;
}
}
/* Must be called with 'acpi_ioremap_lock' or RCU read lock held. */
static struct acpi_ioremap *
acpi_map_lookup(acpi_physical_address phys, acpi_size size)
{
struct acpi_ioremap *map;
list_for_each_entry_rcu(map, &acpi_ioremaps, list)
if (map->phys <= phys &&
phys + size <= map->phys + map->size)
return map;
return NULL;
}
/* Must be called with 'acpi_ioremap_lock' or RCU read lock held. */
static void __iomem *
acpi_map_vaddr_lookup(acpi_physical_address phys, unsigned int size)
{
struct acpi_ioremap *map;
map = acpi_map_lookup(phys, size);
if (map)
return map->virt + (phys - map->phys);
return NULL;
}
void __iomem *acpi_os_get_iomem(acpi_physical_address phys, unsigned int size)
{
struct acpi_ioremap *map;
void __iomem *virt = NULL;
mutex_lock(&acpi_ioremap_lock);
map = acpi_map_lookup(phys, size);
if (map) {
virt = map->virt + (phys - map->phys);
map->refcount++;
}
mutex_unlock(&acpi_ioremap_lock);
return virt;
}
EXPORT_SYMBOL_GPL(acpi_os_get_iomem);
/* Must be called with 'acpi_ioremap_lock' or RCU read lock held. */
static struct acpi_ioremap *
acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
{
struct acpi_ioremap *map;
list_for_each_entry_rcu(map, &acpi_ioremaps, list)
if (map->virt <= virt &&
virt + size <= map->virt + map->size)
return map;
return NULL;
}
#ifndef CONFIG_IA64
#define should_use_kmap(pfn) page_is_ram(pfn)
#else
/* ioremap will take care of cache attributes */
#define should_use_kmap(pfn) 0
#endif
static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz)
{
unsigned long pfn;
pfn = pg_off >> PAGE_SHIFT;
if (should_use_kmap(pfn)) {
if (pg_sz > PAGE_SIZE)
return NULL;
return (void __iomem __force *)kmap(pfn_to_page(pfn));
} else
return acpi_os_ioremap(pg_off, pg_sz);
}
static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr)
{
unsigned long pfn;
pfn = pg_off >> PAGE_SHIFT;
if (should_use_kmap(pfn))
kunmap(pfn_to_page(pfn));
else
iounmap(vaddr);
}
void __iomem *__init_refok
acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
{
struct acpi_ioremap *map;
void __iomem *virt;
acpi_physical_address pg_off;
acpi_size pg_sz;
if (phys > ULONG_MAX) {
printk(KERN_ERR PREFIX "Cannot map memory that high\n");
return NULL;
}
if (!acpi_gbl_permanent_mmap)
return __acpi_map_table((unsigned long)phys, size);
mutex_lock(&acpi_ioremap_lock);
/* Check if there's a suitable mapping already. */
map = acpi_map_lookup(phys, size);
if (map) {
map->refcount++;
goto out;
}
map = kzalloc(sizeof(*map), GFP_KERNEL);
if (!map) {
mutex_unlock(&acpi_ioremap_lock);
return NULL;
}
pg_off = round_down(phys, PAGE_SIZE);
pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off;
virt = acpi_map(pg_off, pg_sz);
if (!virt) {
mutex_unlock(&acpi_ioremap_lock);
kfree(map);
return NULL;
}
INIT_LIST_HEAD(&map->list);
map->virt = virt;
map->phys = pg_off;
map->size = pg_sz;
map->refcount = 1;
list_add_tail_rcu(&map->list, &acpi_ioremaps);
out:
mutex_unlock(&acpi_ioremap_lock);
return map->virt + (phys - map->phys);
}
EXPORT_SYMBOL_GPL(acpi_os_map_memory);
static void acpi_os_drop_map_ref(struct acpi_ioremap *map)
{
if (!--map->refcount)
list_del_rcu(&map->list);
}
static void acpi_os_map_cleanup(struct acpi_ioremap *map)
{
if (!map->refcount) {
synchronize_rcu();
acpi_unmap(map->phys, map->virt);
kfree(map);
}
}
void __ref acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
{
struct acpi_ioremap *map;
if (!acpi_gbl_permanent_mmap) {
__acpi_unmap_table(virt, size);
return;
}
mutex_lock(&acpi_ioremap_lock);
map = acpi_map_lookup_virt(virt, size);
if (!map) {
mutex_unlock(&acpi_ioremap_lock);
WARN(true, PREFIX "%s: bad address %p\n", __func__, virt);
return;
}
acpi_os_drop_map_ref(map);
mutex_unlock(&acpi_ioremap_lock);
acpi_os_map_cleanup(map);
}
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
void __init early_acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
{
if (!acpi_gbl_permanent_mmap)
__acpi_unmap_table(virt, size);
}
int acpi_os_map_generic_address(struct acpi_generic_address *gas)
{
u64 addr;
void __iomem *virt;
if (gas->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
return 0;
/* Handle possible alignment issues */
memcpy(&addr, &gas->address, sizeof(addr));
if (!addr || !gas->bit_width)
return -EINVAL;
virt = acpi_os_map_memory(addr, gas->bit_width / 8);
if (!virt)
return -EIO;
return 0;
}
EXPORT_SYMBOL(acpi_os_map_generic_address);
void acpi_os_unmap_generic_address(struct acpi_generic_address *gas)
{
u64 addr;
struct acpi_ioremap *map;
if (gas->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY)
return;
/* Handle possible alignment issues */
memcpy(&addr, &gas->address, sizeof(addr));
if (!addr || !gas->bit_width)
return;
mutex_lock(&acpi_ioremap_lock);
map = acpi_map_lookup(addr, gas->bit_width / 8);
if (!map) {
mutex_unlock(&acpi_ioremap_lock);
return;
}
acpi_os_drop_map_ref(map);
mutex_unlock(&acpi_ioremap_lock);
acpi_os_map_cleanup(map);
}
EXPORT_SYMBOL(acpi_os_unmap_generic_address);
#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_os_get_physical_address(void *virt, acpi_physical_address * phys)
{
if (!phys || !virt)
return AE_BAD_PARAMETER;
*phys = virt_to_phys(virt);
return AE_OK;
}
#endif
#define ACPI_MAX_OVERRIDE_LEN 100
static char acpi_os_name[ACPI_MAX_OVERRIDE_LEN];
acpi_status
acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
acpi_string * new_val)
{
if (!init_val || !new_val)
return AE_BAD_PARAMETER;
*new_val = NULL;
if (!memcmp(init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {
printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n",
acpi_os_name);
*new_val = acpi_os_name;
}
return AE_OK;
}
#ifdef CONFIG_ACPI_INITRD_TABLE_OVERRIDE
#include <linux/earlycpio.h>
#include <linux/memblock.h>
static u64 acpi_tables_addr;
static int all_tables_size;
/* Copied from acpica/tbutils.c:acpi_tb_checksum() */
static u8 __init acpi_table_checksum(u8 *buffer, u32 length)
{
u8 sum = 0;
u8 *end = buffer + length;
while (buffer < end)
sum = (u8) (sum + *(buffer++));
return sum;
}
/* All but ACPI_SIG_RSDP and ACPI_SIG_FACS: */
static const char * const table_sigs[] = {
ACPI_SIG_BERT, ACPI_SIG_CPEP, ACPI_SIG_ECDT, ACPI_SIG_EINJ,
ACPI_SIG_ERST, ACPI_SIG_HEST, ACPI_SIG_MADT, ACPI_SIG_MSCT,
ACPI_SIG_SBST, ACPI_SIG_SLIT, ACPI_SIG_SRAT, ACPI_SIG_ASF,
ACPI_SIG_BOOT, ACPI_SIG_DBGP, ACPI_SIG_DMAR, ACPI_SIG_HPET,
ACPI_SIG_IBFT, ACPI_SIG_IVRS, ACPI_SIG_MCFG, ACPI_SIG_MCHI,
ACPI_SIG_SLIC, ACPI_SIG_SPCR, ACPI_SIG_SPMI, ACPI_SIG_TCPA,
ACPI_SIG_UEFI, ACPI_SIG_WAET, ACPI_SIG_WDAT, ACPI_SIG_WDDT,
ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT, ACPI_SIG_PSDT,
ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT, NULL };
#define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
#define ACPI_OVERRIDE_TABLES 64
static struct cpio_data __initdata acpi_initrd_files[ACPI_OVERRIDE_TABLES];
#define MAP_CHUNK_SIZE (NR_FIX_BTMAPS << PAGE_SHIFT)
void __init acpi_initrd_override(void *data, size_t size)
{
int sig, no, table_nr = 0, total_offset = 0;
long offset = 0;
struct acpi_table_header *table;
char cpio_path[32] = "kernel/firmware/acpi/";
struct cpio_data file;
if (data == NULL || size == 0)
return;
for (no = 0; no < ACPI_OVERRIDE_TABLES; no++) {
file = find_cpio_data(cpio_path, data, size, &offset);
if (!file.data)
break;
data += offset;
size -= offset;
if (file.size < sizeof(struct acpi_table_header)) {
pr_err("ACPI OVERRIDE: Table smaller than ACPI header [%s%s]\n",
cpio_path, file.name);
continue;
}
table = file.data;
for (sig = 0; table_sigs[sig]; sig++)
if (!memcmp(table->signature, table_sigs[sig], 4))
break;
if (!table_sigs[sig]) {
pr_err("ACPI OVERRIDE: Unknown signature [%s%s]\n",
cpio_path, file.name);
continue;
}
if (file.size != table->length) {
pr_err("ACPI OVERRIDE: File length does not match table length [%s%s]\n",
cpio_path, file.name);
continue;
}
if (acpi_table_checksum(file.data, table->length)) {
pr_err("ACPI OVERRIDE: Bad table checksum [%s%s]\n",
cpio_path, file.name);
continue;
}
pr_info("%4.4s ACPI table found in initrd [%s%s][0x%x]\n",
table->signature, cpio_path, file.name, table->length);
all_tables_size += table->length;
acpi_initrd_files[table_nr].data = file.data;
acpi_initrd_files[table_nr].size = file.size;
table_nr++;
}
if (table_nr == 0)
return;
acpi_tables_addr =
memblock_find_in_range(0, max_low_pfn_mapped << PAGE_SHIFT,
all_tables_size, PAGE_SIZE);
if (!acpi_tables_addr) {
WARN_ON(1);
return;
}
/*
* Only calling e820_add_reserve does not work and the
* tables are invalid (memory got used) later.
* memblock_reserve works as expected and the tables won't get modified.
* But it's not enough on X86 because ioremap will
* complain later (used by acpi_os_map_memory) that the pages
* that should get mapped are not marked "reserved".
* Both memblock_reserve and e820_add_region (via arch_reserve_mem_area)
* works fine.
*/
memblock_reserve(acpi_tables_addr, all_tables_size);
arch_reserve_mem_area(acpi_tables_addr, all_tables_size);
/*
* early_ioremap only can remap 256k one time. If we map all
* tables one time, we will hit the limit. Need to map chunks
* one by one during copying the same as that in relocate_initrd().
*/
for (no = 0; no < table_nr; no++) {
unsigned char *src_p = acpi_initrd_files[no].data;
phys_addr_t size = acpi_initrd_files[no].size;
phys_addr_t dest_addr = acpi_tables_addr + total_offset;
phys_addr_t slop, clen;
char *dest_p;
total_offset += size;
while (size) {
slop = dest_addr & ~PAGE_MASK;
clen = size;
if (clen > MAP_CHUNK_SIZE - slop)
clen = MAP_CHUNK_SIZE - slop;
dest_p = early_ioremap(dest_addr & PAGE_MASK,
clen + slop);
memcpy(dest_p + slop, src_p, clen);
early_iounmap(dest_p, clen + slop);
src_p += clen;
dest_addr += clen;
size -= clen;
}
}
}
#endif /* CONFIG_ACPI_INITRD_TABLE_OVERRIDE */
static void acpi_table_taint(struct acpi_table_header *table)
{
pr_warn(PREFIX
"Override [%4.4s-%8.8s], this is unsafe: tainting kernel\n",
table->signature, table->oem_table_id);
add_taint(TAINT_OVERRIDDEN_ACPI_TABLE, LOCKDEP_NOW_UNRELIABLE);
}
acpi_status
acpi_os_table_override(struct acpi_table_header * existing_table,
struct acpi_table_header ** new_table)
{
if (!existing_table || !new_table)
return AE_BAD_PARAMETER;
*new_table = NULL;
#ifdef CONFIG_ACPI_CUSTOM_DSDT
if (strncmp(existing_table->signature, "DSDT", 4) == 0)
*new_table = (struct acpi_table_header *)AmlCode;
#endif
if (*new_table != NULL)
acpi_table_taint(existing_table);
return AE_OK;
}
acpi_status
acpi_os_physical_table_override(struct acpi_table_header *existing_table,
acpi_physical_address *address,
u32 *table_length)
{
#ifndef CONFIG_ACPI_INITRD_TABLE_OVERRIDE
*table_length = 0;
*address = 0;
return AE_OK;
#else
int table_offset = 0;
struct acpi_table_header *table;
*table_length = 0;
*address = 0;
if (!acpi_tables_addr)
return AE_OK;
do {
if (table_offset + ACPI_HEADER_SIZE > all_tables_size) {
WARN_ON(1);
return AE_OK;
}
table = acpi_os_map_memory(acpi_tables_addr + table_offset,
ACPI_HEADER_SIZE);
if (table_offset + table->length > all_tables_size) {
acpi_os_unmap_memory(table, ACPI_HEADER_SIZE);
WARN_ON(1);
return AE_OK;
}
table_offset += table->length;
if (memcmp(existing_table->signature, table->signature, 4)) {
acpi_os_unmap_memory(table,
ACPI_HEADER_SIZE);
continue;
}
/* Only override tables with matching oem id */
if (memcmp(table->oem_table_id, existing_table->oem_table_id,
ACPI_OEM_TABLE_ID_SIZE)) {
acpi_os_unmap_memory(table,
ACPI_HEADER_SIZE);
continue;
}
table_offset -= table->length;
*table_length = table->length;
acpi_os_unmap_memory(table, ACPI_HEADER_SIZE);
*address = acpi_tables_addr + table_offset;
break;
} while (table_offset + ACPI_HEADER_SIZE < all_tables_size);
if (*address != 0)
acpi_table_taint(existing_table);
return AE_OK;
#endif
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
static irqreturn_t acpi_irq(int irq, void *dev_id)
{
u32 handled;
handled = (*acpi_irq_handler) (acpi_irq_context);
if (handled) {
acpi_irq_handled++;
return IRQ_HANDLED;
} else {
acpi_irq_not_handled++;
return IRQ_NONE;
}
}
acpi_status
acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler,
void *context)
{
unsigned int irq;
acpi_irq_stats_init();
/*
* ACPI interrupts different from the SCI in our copy of the FADT are
* not supported.
*/
if (gsi != acpi_gbl_FADT.sci_interrupt)
return AE_BAD_PARAMETER;
if (acpi_irq_handler)
return AE_ALREADY_ACQUIRED;
if (acpi_gsi_to_irq(gsi, &irq) < 0) {
printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n",
gsi);
return AE_OK;
}
acpi_irq_handler = handler;
acpi_irq_context = context;
if (request_irq(irq, acpi_irq, IRQF_SHARED | IRQF_NO_SUSPEND, "acpi", acpi_irq)) {
printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
acpi_irq_handler = NULL;
return AE_NOT_ACQUIRED;
}
return AE_OK;
}
acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler)
{
if (irq != acpi_gbl_FADT.sci_interrupt)
return AE_BAD_PARAMETER;
free_irq(irq, acpi_irq);
acpi_irq_handler = NULL;
return AE_OK;
}
/*
* Running in interpreter thread context, safe to sleep
*/
void acpi_os_sleep(u64 ms)
{
msleep(ms);
}
void acpi_os_stall(u32 us)
{
while (us) {
u32 delay = 1000;
if (delay > us)
delay = us;
udelay(delay);
touch_nmi_watchdog();
us -= delay;
}
}
/*
* Support ACPI 3.0 AML Timer operand
* Returns 64-bit free-running, monotonically increasing timer
* with 100ns granularity
*/
u64 acpi_os_get_timer(void)
{
ACPI: implement acpi_os_get_timer() according the spec ACPI Timer() opcode should return monotonically increasing clock with 100ns granularity according the ACPI 5.0 spec. Testing the current Timer() implementation with following ASL code (and an additional debug print in acpi_os_sleep() to get the sleep times dumped out to dmesg): // Test: 10ms Store(Timer, Local1) Sleep(10) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) // Test: 200ms Store(Timer, Local1) Sleep(200) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) // Test 1300ms Store(Timer, Local1) Sleep(1300) Divide(Subtract(Timer, Local1), 10000,, Local1) Sleep(Local1) The second sleep value is calculated using Timer(). If the implementation is good enough we should be able to get the second value pretty close to the first. However, the current Timer() gives pretty bad sleep times: [ 11.488100] ACPI: acpi_os_get_timer() TBD [ 11.492150] ACPI: Sleep(10) [ 11.502993] ACPI: Sleep(0) [ 11.506315] ACPI: Sleep(200) [ 11.706237] ACPI: Sleep(0) [ 11.709550] ACPI: Sleep(1300) [ 13.008929] ACPI: Sleep(0) Fix this with the help of ktime_get(). Once the fix is applied and run against the same ASL code we get: [ 11.486786] ACPI: Sleep(10) [ 11.499029] ACPI: Sleep(12) [ 11.512350] ACPI: Sleep(200) [ 11.712282] ACPI: Sleep(200) [ 11.912170] ACPI: Sleep(1300) [ 13.211577] ACPI: Sleep(1300) That is much more closer to the values we expected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-23 11:27:46 +04:00
u64 time_ns = ktime_to_ns(ktime_get());
do_div(time_ns, 100);
return time_ns;
}
acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width)
{
u32 dummy;
if (!value)
value = &dummy;
*value = 0;
if (width <= 8) {
*(u8 *) value = inb(port);
} else if (width <= 16) {
*(u16 *) value = inw(port);
} else if (width <= 32) {
*(u32 *) value = inl(port);
} else {
BUG();
}
return AE_OK;
}
EXPORT_SYMBOL(acpi_os_read_port);
acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width)
{
if (width <= 8) {
outb(value, port);
} else if (width <= 16) {
outw(value, port);
} else if (width <= 32) {
outl(value, port);
} else {
BUG();
}
return AE_OK;
}
EXPORT_SYMBOL(acpi_os_write_port);
#ifdef readq
static inline u64 read64(const volatile void __iomem *addr)
{
return readq(addr);
}
#else
static inline u64 read64(const volatile void __iomem *addr)
{
u64 l, h;
l = readl(addr);
h = readl(addr+4);
return l | (h << 32);
}
#endif
acpi_status
acpi_os_read_memory(acpi_physical_address phys_addr, u64 *value, u32 width)
{
void __iomem *virt_addr;
unsigned int size = width / 8;
bool unmap = false;
u64 dummy;
rcu_read_lock();
virt_addr = acpi_map_vaddr_lookup(phys_addr, size);
if (!virt_addr) {
rcu_read_unlock();
virt_addr = acpi_os_ioremap(phys_addr, size);
if (!virt_addr)
return AE_BAD_ADDRESS;
unmap = true;
}
if (!value)
value = &dummy;
switch (width) {
case 8:
*(u8 *) value = readb(virt_addr);
break;
case 16:
*(u16 *) value = readw(virt_addr);
break;
case 32:
*(u32 *) value = readl(virt_addr);
break;
case 64:
*(u64 *) value = read64(virt_addr);
break;
default:
BUG();
}
if (unmap)
iounmap(virt_addr);
else
rcu_read_unlock();
return AE_OK;
}
#ifdef writeq
static inline void write64(u64 val, volatile void __iomem *addr)
{
writeq(val, addr);
}
#else
static inline void write64(u64 val, volatile void __iomem *addr)
{
writel(val, addr);
writel(val>>32, addr+4);
}
#endif
acpi_status
acpi_os_write_memory(acpi_physical_address phys_addr, u64 value, u32 width)
{
void __iomem *virt_addr;
unsigned int size = width / 8;
bool unmap = false;
rcu_read_lock();
virt_addr = acpi_map_vaddr_lookup(phys_addr, size);
if (!virt_addr) {
rcu_read_unlock();
virt_addr = acpi_os_ioremap(phys_addr, size);
if (!virt_addr)
return AE_BAD_ADDRESS;
unmap = true;
}
switch (width) {
case 8:
writeb(value, virt_addr);
break;
case 16:
writew(value, virt_addr);
break;
case 32:
writel(value, virt_addr);
break;
case 64:
write64(value, virt_addr);
break;
default:
BUG();
}
if (unmap)
iounmap(virt_addr);
else
rcu_read_unlock();
return AE_OK;
}
acpi_status
acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
u64 *value, u32 width)
{
int result, size;
u32 value32;
if (!value)
return AE_BAD_PARAMETER;
switch (width) {
case 8:
size = 1;
break;
case 16:
size = 2;
break;
case 32:
size = 4;
break;
default:
return AE_ERROR;
}
result = raw_pci_read(pci_id->segment, pci_id->bus,
PCI_DEVFN(pci_id->device, pci_id->function),
reg, size, &value32);
*value = value32;
return (result ? AE_ERROR : AE_OK);
}
acpi_status
acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
u64 value, u32 width)
{
int result, size;
switch (width) {
case 8:
size = 1;
break;
case 16:
size = 2;
break;
case 32:
size = 4;
break;
default:
return AE_ERROR;
}
result = raw_pci_write(pci_id->segment, pci_id->bus,
PCI_DEVFN(pci_id->device, pci_id->function),
reg, size, value);
return (result ? AE_ERROR : AE_OK);
}
2006-11-22 17:55:48 +03:00
static void acpi_os_execute_deferred(struct work_struct *work)
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-10 07:31:03 +04:00
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
dpc->function(dpc->context);
kfree(dpc);
}
/*******************************************************************************
*
* FUNCTION: acpi_os_execute
*
* PARAMETERS: Type - Type of the callback
* Function - Function to be executed
* Context - Function parameters
*
* RETURN: Status
*
* DESCRIPTION: Depending on type, either queues function for deferred execution or
* immediately executes function on a separate thread.
*
******************************************************************************/
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
acpi_status acpi_os_execute(acpi_execute_type type,
acpi_osd_exec_callback function, void *context)
{
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct workqueue_struct *queue;
int ret;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
function, context));
/*
* Allocate/initialize DPC structure. Note that this memory will be
2006-11-22 17:55:48 +03:00
* freed by the callee. The kernel handles the work_struct list in a
* way that allows us to also free its memory inside the callee.
* Because we may want to schedule several tasks with different
* parameters we can't use the approach some kernel code uses of
2006-11-22 17:55:48 +03:00
* having a static work_struct.
*/
dpc = kzalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
if (!dpc)
return AE_NO_MEMORY;
dpc->function = function;
dpc->context = context;
/*
* To prevent lockdep from complaining unnecessarily, make sure that
* there is a different static lockdep key for each workqueue by using
* INIT_WORK() for each of them separately.
*/
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
if (type == OSL_NOTIFY_HANDLER) {
queue = kacpi_notify_wq;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
} else {
queue = kacpid_wq;
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
}
/*
* On some machines, a software-initiated SMI causes corruption unless
* the SMI runs on CPU 0. An SMI can be initiated by any AML, but
* typically it's done in GPE-related methods that are run via
* workqueues, so we can avoid the known corruption cases by always
* queueing on CPU 0.
*/
ret = queue_work_on(0, queue, &dpc->work);
if (!ret) {
printk(KERN_ERR PREFIX
"Call to queue_work() failed.\n");
status = AE_ERROR;
kfree(dpc);
}
return status;
}
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
EXPORT_SYMBOL(acpi_os_execute);
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
void acpi_os_wait_events_complete(void)
{
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
}
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
struct acpi_hp_work {
struct work_struct work;
acpi_hp_callback func;
void *data;
u32 src;
};
static void acpi_hotplug_work_fn(struct work_struct *work)
{
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
struct acpi_hp_work *hpw = container_of(work, struct acpi_hp_work, work);
acpi_os_wait_events_complete();
hpw->func(hpw->data, hpw->src);
kfree(hpw);
}
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
acpi_status acpi_hotplug_execute(acpi_hp_callback func, void *data, u32 src)
{
ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines There are two different interfaces for queuing up work items on the ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host bridge hotplug code and acpi_os_hotplug_execute() used by the common ACPI hotplug code and docking stations. They both are somewhat cumbersome to use and work slightly differently. The users of alloc_acpi_hp_work() have to submit a work function that will extract the necessary data items from a struct acpi_hp_work object allocated by alloc_acpi_hp_work() and then will free that object, while it would be more straightforward to simply use a work function with one more argument and let the interface take care of the execution details. The users of acpi_os_hotplug_execute() also have to deal with the fact that it takes only one argument in addition to the work function pointer, although acpi_os_execute_deferred() actually takes care of the allocation and freeing of memory, so it would have been able to pass more arguments to the work function if it hadn't been constrained by the connection with acpi_os_execute(). Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory allocations, which is correct, because hotplug work items are always queued up from process context, acpi_os_hotplug_execute() uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also, acpi_os_execute_deferred() queued up by it waits for the ACPI event workqueues to flush before executing the work function, whereas alloc_acpi_hp_work() can't do anything similar. That leads to somewhat arbitrary differences in behavior between various ACPI hotplug code paths and has to be straightened up. For this reason, replace both alloc_acpi_hp_work() and acpi_os_hotplug_execute() with a single interface, acpi_hotplug_execute(), combining their behavior and being more friendly to its users than any of the two. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2013-11-07 04:45:40 +04:00
struct acpi_hp_work *hpw;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p, %u)] for deferred execution.\n",
func, data, src));
hpw = kmalloc(sizeof(*hpw), GFP_KERNEL);
if (!hpw)
return AE_NO_MEMORY;
INIT_WORK(&hpw->work, acpi_hotplug_work_fn);
hpw->func = func;
hpw->data = data;
hpw->src = src;
/*
* We can't run hotplug code in kacpid_wq/kacpid_notify_wq etc., because
* the hotplug code may call driver .remove() functions, which may
* invoke flush_scheduled_work()/acpi_os_wait_events_complete() to flush
* these workqueues.
*/
if (!queue_work(kacpi_hotplug_wq, &hpw->work)) {
kfree(hpw);
return AE_ERROR;
}
return AE_OK;
}
bool acpi_queue_hotplug_work(struct work_struct *work)
{
return queue_work(kacpi_hotplug_wq, work);
}
acpi_status
acpi_os_create_semaphore(u32 max_units, u32 initial_units, acpi_handle * handle)
{
struct semaphore *sem = NULL;
sem = acpi_os_allocate(sizeof(struct semaphore));
if (!sem)
return AE_NO_MEMORY;
memset(sem, 0, sizeof(struct semaphore));
sema_init(sem, initial_units);
*handle = (acpi_handle *) sem;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Creating semaphore[%p|%d].\n",
*handle, initial_units));
return AE_OK;
}
/*
* TODO: A better way to delete semaphores? Linux doesn't have a
* 'delete_semaphore()' function -- may result in an invalid
* pointer dereference for non-synchronized consumers. Should
* we at least check for blocked threads and signal/cancel them?
*/
acpi_status acpi_os_delete_semaphore(acpi_handle handle)
{
struct semaphore *sem = (struct semaphore *)handle;
if (!sem)
return AE_BAD_PARAMETER;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Deleting semaphore[%p].\n", handle));
BUG_ON(!list_empty(&sem->wait_list));
kfree(sem);
sem = NULL;
return AE_OK;
}
/*
* TODO: Support for units > 1?
*/
acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout)
{
acpi_status status = AE_OK;
struct semaphore *sem = (struct semaphore *)handle;
long jiffies;
int ret = 0;
if (!sem || (units < 1))
return AE_BAD_PARAMETER;
if (units > 1)
return AE_SUPPORT;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n",
handle, units, timeout));
if (timeout == ACPI_WAIT_FOREVER)
jiffies = MAX_SCHEDULE_TIMEOUT;
else
jiffies = msecs_to_jiffies(timeout);
ret = down_timeout(sem, jiffies);
if (ret)
status = AE_TIME;
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Failed to acquire semaphore[%p|%d|%d], %s",
handle, units, timeout,
acpi_format_exception(status)));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Acquired semaphore[%p|%d|%d]", handle,
units, timeout));
}
return status;
}
/*
* TODO: Support for units > 1?
*/
acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units)
{
struct semaphore *sem = (struct semaphore *)handle;
if (!sem || (units < 1))
return AE_BAD_PARAMETER;
if (units > 1)
return AE_SUPPORT;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Signaling semaphore[%p|%d]\n", handle,
units));
up(sem);
return AE_OK;
}
#ifdef ACPI_FUTURE_USAGE
u32 acpi_os_get_line(char *buffer)
{
#ifdef ENABLE_DEBUGGER
if (acpi_in_debugger) {
u32 chars;
kdb_read(buffer, sizeof(line_buf));
/* remove the CR kdb includes */
chars = strlen(buffer) - 1;
buffer[chars] = '\0';
}
#endif
return 0;
}
#endif /* ACPI_FUTURE_USAGE */
acpi_status acpi_os_signal(u32 function, void *info)
{
switch (function) {
case ACPI_SIGNAL_FATAL:
printk(KERN_ERR PREFIX "Fatal opcode executed\n");
break;
case ACPI_SIGNAL_BREAKPOINT:
/*
* AML Breakpoint
* ACPI spec. says to treat it as a NOP unless
* you are debugging. So if/when we integrate
* AML debugger into the kernel debugger its
* hook will go here. But until then it is
* not useful to print anything on breakpoints.
*/
break;
default:
break;
}
return AE_OK;
}
static int __init acpi_os_name_setup(char *str)
{
char *p = acpi_os_name;
int count = ACPI_MAX_OVERRIDE_LEN - 1;
if (!str || !*str)
return 0;
for (; count-- && *str; str++) {
if (isalnum(*str) || *str == ' ' || *str == ':')
*p++ = *str;
else if (*str == '\'' || *str == '"')
continue;
else
break;
}
*p = 0;
return 1;
}
__setup("acpi_os_name=", acpi_os_name_setup);
#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
#define OSI_STRING_ENTRIES_MAX 16 /* arbitrary */
struct osi_setup_entry {
char string[OSI_STRING_LENGTH_MAX];
bool enable;
};
static struct osi_setup_entry
osi_setup_entries[OSI_STRING_ENTRIES_MAX] __initdata = {
{"Module Device", true},
{"Processor Device", true},
{"3.0 _SCP Extensions", true},
{"Processor Aggregator Device", true},
};
void __init acpi_osi_setup(char *str)
{
struct osi_setup_entry *osi;
bool enable = true;
int i;
if (!acpi_gbl_create_osi_method)
return;
if (str == NULL || *str == '\0') {
printk(KERN_INFO PREFIX "_OSI method disabled\n");
acpi_gbl_create_osi_method = FALSE;
return;
}
if (*str == '!') {
str++;
ACPI: Add facility to disable all _OSI OS vendor strings This patch introduces "acpi_osi=!" command line to force Linux replying "UNSUPPORTED" to all of the _OSI strings. This patch is based on an ACPICA enhancement - the new API acpi_update_interfaces(). The _OSI object provides the platform with the ability to query OSPM to determine the set of ACPI related interfaces, behaviors, or features that the operating system supports. The argument passed to the _OSI is a string like the followings: 1. Feature Group String, examples include Module Device Processor Device 3.0 _SCP Extensions Processor Aggregator Device ... 2. OS Vendor String, examples include Linux FreeBSD Windows ... There are AML codes provided in the ACPI namespace written in the following style to determine OSPM interfaces / features: Method(OSCK) { if (CondRefOf(_OSI, Local0)) { if (\_OSI("Windows")) { Return (One) } if (\_OSI("Windows 2006")) { Return (Ones) } Return (Zero) } Return (Zero) } There is a debugging facility implemented in Linux. Users can pass "acpi_osi=" boot parameters to the kernel to tune the _OSI evaluation result so that certain AML codes can be executed. Current implementation includes: 1. 'acpi_osi=' - this makes CondRefOf(_OSI, Local0) TRUE 2. 'acpi_osi="Windows"' - this makes \_OSI("Windows") TRUE 3. 'acpi_osi="!Windows"' - this makes \_OSI("Windows") FALSE The function to implement this feature is also used as a quirk mechanism in the Linux ACPI subystem. When _OSI is evaluatated by the AML codes, ACPICA replies "SUPPORTED" to all Windows operating system vendor strings. This is because Windows operating systems return "SUPPORTED" if the argument to the _OSI method specifies an earlier version of Windows. Please refer to the following MSDN document: How to Identify the Windows Version in ACPI by Using _OSI http://msdn.microsoft.com/en-us/library/hardware/gg463275.aspx This adds difficulties when developers want to feed specific Windows operating system vendor string to the BIOS codes for debugging purpose, multiple acpi_osi="!xxx" have to be specified in the command line to force Linux replying "UNSUPPORTED" to the Windows OS vendor strings listed in the AML codes. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-22 12:08:25 +04:00
if (*str == '\0') {
osi_linux.default_disabling = 1;
return;
} else if (*str == '*') {
acpi_update_interfaces(ACPI_DISABLE_ALL_STRINGS);
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
osi = &osi_setup_entries[i];
osi->enable = false;
}
return;
ACPI: Add facility to disable all _OSI OS vendor strings This patch introduces "acpi_osi=!" command line to force Linux replying "UNSUPPORTED" to all of the _OSI strings. This patch is based on an ACPICA enhancement - the new API acpi_update_interfaces(). The _OSI object provides the platform with the ability to query OSPM to determine the set of ACPI related interfaces, behaviors, or features that the operating system supports. The argument passed to the _OSI is a string like the followings: 1. Feature Group String, examples include Module Device Processor Device 3.0 _SCP Extensions Processor Aggregator Device ... 2. OS Vendor String, examples include Linux FreeBSD Windows ... There are AML codes provided in the ACPI namespace written in the following style to determine OSPM interfaces / features: Method(OSCK) { if (CondRefOf(_OSI, Local0)) { if (\_OSI("Windows")) { Return (One) } if (\_OSI("Windows 2006")) { Return (Ones) } Return (Zero) } Return (Zero) } There is a debugging facility implemented in Linux. Users can pass "acpi_osi=" boot parameters to the kernel to tune the _OSI evaluation result so that certain AML codes can be executed. Current implementation includes: 1. 'acpi_osi=' - this makes CondRefOf(_OSI, Local0) TRUE 2. 'acpi_osi="Windows"' - this makes \_OSI("Windows") TRUE 3. 'acpi_osi="!Windows"' - this makes \_OSI("Windows") FALSE The function to implement this feature is also used as a quirk mechanism in the Linux ACPI subystem. When _OSI is evaluatated by the AML codes, ACPICA replies "SUPPORTED" to all Windows operating system vendor strings. This is because Windows operating systems return "SUPPORTED" if the argument to the _OSI method specifies an earlier version of Windows. Please refer to the following MSDN document: How to Identify the Windows Version in ACPI by Using _OSI http://msdn.microsoft.com/en-us/library/hardware/gg463275.aspx This adds difficulties when developers want to feed specific Windows operating system vendor string to the BIOS codes for debugging purpose, multiple acpi_osi="!xxx" have to be specified in the command line to force Linux replying "UNSUPPORTED" to the Windows OS vendor strings listed in the AML codes. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-22 12:08:25 +04:00
}
enable = false;
}
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
osi = &osi_setup_entries[i];
if (!strcmp(osi->string, str)) {
osi->enable = enable;
break;
} else if (osi->string[0] == '\0') {
osi->enable = enable;
strncpy(osi->string, str, OSI_STRING_LENGTH_MAX);
break;
}
}
}
static void __init set_osi_linux(unsigned int enable)
{
if (osi_linux.enable != enable)
osi_linux.enable = enable;
if (osi_linux.enable)
acpi_osi_setup("Linux");
else
acpi_osi_setup("!Linux");
return;
}
static void __init acpi_cmdline_osi_linux(unsigned int enable)
{
osi_linux.cmdline = 1; /* cmdline set the default and override DMI */
osi_linux.dmi = 0;
set_osi_linux(enable);
return;
}
void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
if (enable == -1)
return;
osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
set_osi_linux(enable);
return;
}
/*
* Modify the list of "OS Interfaces" reported to BIOS via _OSI
*
* empty string disables _OSI
* string starting with '!' disables that string
* otherwise string is added to list, augmenting built-in strings
*/
static void __init acpi_osi_setup_late(void)
{
struct osi_setup_entry *osi;
char *str;
int i;
acpi_status status;
ACPI: Add facility to disable all _OSI OS vendor strings This patch introduces "acpi_osi=!" command line to force Linux replying "UNSUPPORTED" to all of the _OSI strings. This patch is based on an ACPICA enhancement - the new API acpi_update_interfaces(). The _OSI object provides the platform with the ability to query OSPM to determine the set of ACPI related interfaces, behaviors, or features that the operating system supports. The argument passed to the _OSI is a string like the followings: 1. Feature Group String, examples include Module Device Processor Device 3.0 _SCP Extensions Processor Aggregator Device ... 2. OS Vendor String, examples include Linux FreeBSD Windows ... There are AML codes provided in the ACPI namespace written in the following style to determine OSPM interfaces / features: Method(OSCK) { if (CondRefOf(_OSI, Local0)) { if (\_OSI("Windows")) { Return (One) } if (\_OSI("Windows 2006")) { Return (Ones) } Return (Zero) } Return (Zero) } There is a debugging facility implemented in Linux. Users can pass "acpi_osi=" boot parameters to the kernel to tune the _OSI evaluation result so that certain AML codes can be executed. Current implementation includes: 1. 'acpi_osi=' - this makes CondRefOf(_OSI, Local0) TRUE 2. 'acpi_osi="Windows"' - this makes \_OSI("Windows") TRUE 3. 'acpi_osi="!Windows"' - this makes \_OSI("Windows") FALSE The function to implement this feature is also used as a quirk mechanism in the Linux ACPI subystem. When _OSI is evaluatated by the AML codes, ACPICA replies "SUPPORTED" to all Windows operating system vendor strings. This is because Windows operating systems return "SUPPORTED" if the argument to the _OSI method specifies an earlier version of Windows. Please refer to the following MSDN document: How to Identify the Windows Version in ACPI by Using _OSI http://msdn.microsoft.com/en-us/library/hardware/gg463275.aspx This adds difficulties when developers want to feed specific Windows operating system vendor string to the BIOS codes for debugging purpose, multiple acpi_osi="!xxx" have to be specified in the command line to force Linux replying "UNSUPPORTED" to the Windows OS vendor strings listed in the AML codes. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-22 12:08:25 +04:00
if (osi_linux.default_disabling) {
status = acpi_update_interfaces(ACPI_DISABLE_ALL_VENDOR_STRINGS);
if (ACPI_SUCCESS(status))
printk(KERN_INFO PREFIX "Disabled all _OSI OS vendors\n");
}
for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
osi = &osi_setup_entries[i];
str = osi->string;
if (*str == '\0')
break;
if (osi->enable) {
status = acpi_install_interface(str);
if (ACPI_SUCCESS(status))
printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
} else {
status = acpi_remove_interface(str);
if (ACPI_SUCCESS(status))
printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
}
}
}
static int __init osi_setup(char *str)
{
if (str && !strcmp("Linux", str))
acpi_cmdline_osi_linux(1);
else if (str && !strcmp("!Linux", str))
acpi_cmdline_osi_linux(0);
else
acpi_osi_setup(str);
return 1;
}
__setup("acpi_osi=", osi_setup);
/* enable serialization to combat AE_ALREADY_EXISTS errors */
static int __init acpi_serialize_setup(char *str)
{
printk(KERN_INFO PREFIX "serialize enabled\n");
acpi_gbl_all_methods_serialized = TRUE;
return 1;
}
__setup("acpi_serialize", acpi_serialize_setup);
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
/* Check of resource interference between native drivers and ACPI
* OperationRegions (SystemIO and System Memory only).
* IO ports and memory declared in ACPI might be used by the ACPI subsystem
* in arbitrary AML code and can interfere with legacy drivers.
* acpi_enforce_resources= can be set to:
*
* - strict (default) (2)
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
* -> further driver trying to access the resources will not load
* - lax (1)
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
* -> further driver trying to access the resources will load, but you
* get a system message that something might go wrong...
*
* - no (0)
* -> ACPI Operation Region resources will not be registered
*
*/
#define ENFORCE_RESOURCES_STRICT 2
#define ENFORCE_RESOURCES_LAX 1
#define ENFORCE_RESOURCES_NO 0
static unsigned int acpi_enforce_resources = ENFORCE_RESOURCES_STRICT;
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
static int __init acpi_enforce_resources_setup(char *str)
{
if (str == NULL || *str == '\0')
return 0;
if (!strcmp("strict", str))
acpi_enforce_resources = ENFORCE_RESOURCES_STRICT;
else if (!strcmp("lax", str))
acpi_enforce_resources = ENFORCE_RESOURCES_LAX;
else if (!strcmp("no", str))
acpi_enforce_resources = ENFORCE_RESOURCES_NO;
return 1;
}
__setup("acpi_enforce_resources=", acpi_enforce_resources_setup);
/* Check for resource conflicts between ACPI OperationRegions and native
* drivers */
int acpi_check_resource_conflict(const struct resource *res)
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
{
acpi_adr_space_type space_id;
acpi_size length;
u8 warn = 0;
int clash = 0;
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
if (acpi_enforce_resources == ENFORCE_RESOURCES_NO)
return 0;
if (!(res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_MEM))
return 0;
if (res->flags & IORESOURCE_IO)
space_id = ACPI_ADR_SPACE_SYSTEM_IO;
else
space_id = ACPI_ADR_SPACE_SYSTEM_MEMORY;
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
length = resource_size(res);
if (acpi_enforce_resources != ENFORCE_RESOURCES_NO)
warn = 1;
clash = acpi_check_address_range(space_id, res->start, length, warn);
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
if (clash) {
if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) {
if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
printk(KERN_NOTICE "ACPI: This conflict may"
" cause random problems and system"
" instability\n");
printk(KERN_INFO "ACPI: If an ACPI driver is available"
" for this device, you should use it instead of"
" the native driver\n");
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
}
if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT)
return -EBUSY;
}
return 0;
}
EXPORT_SYMBOL(acpi_check_resource_conflict);
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:31:22 +03:00
int acpi_check_region(resource_size_t start, resource_size_t n,
const char *name)
{
struct resource res = {
.start = start,
.end = start + n - 1,
.name = name,
.flags = IORESOURCE_IO,
};
return acpi_check_resource_conflict(&res);
}
EXPORT_SYMBOL(acpi_check_region);
/*
* Let drivers know whether the resource checks are effective
*/
int acpi_resources_are_enforced(void)
{
return acpi_enforce_resources == ENFORCE_RESOURCES_STRICT;
}
EXPORT_SYMBOL(acpi_resources_are_enforced);
/*
* Deallocate the memory for a spinlock.
*/
void acpi_os_delete_lock(acpi_spinlock handle)
{
ACPI_FREE(handle);
}
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
/*
* Acquire a spinlock.
*
* handle is a pointer to the spinlock_t.
*/
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-24 01:04:00 +04:00
acpi_cpu_flags acpi_os_acquire_lock(acpi_spinlock lockp)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
{
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-28 00:43:00 +03:00
acpi_cpu_flags flags;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-24 01:04:00 +04:00
spin_lock_irqsave(lockp, flags);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
return flags;
}
/*
* Release a spinlock. See above.
*/
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-24 01:04:00 +04:00
void acpi_os_release_lock(acpi_spinlock lockp, acpi_cpu_flags flags)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
{
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-24 01:04:00 +04:00
spin_unlock_irqrestore(lockp, flags);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
}
#ifndef ACPI_USE_LOCAL_CACHE
/*******************************************************************************
*
* FUNCTION: acpi_os_create_cache
*
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
* PARAMETERS: name - Ascii name for the cache
* size - Size of each cached object
* depth - Maximum depth of the cache (in objects) <ignored>
* cache - Where the new cache object is returned
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
*
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
* RETURN: status
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
*
* DESCRIPTION: Create a cache object
*
******************************************************************************/
acpi_status
acpi_os_create_cache(char *name, u16 size, u16 depth, acpi_cache_t ** cache)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
{
*cache = kmem_cache_create(name, size, 0, 0, NULL);
if (*cache == NULL)
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 01:15:00 +04:00
return AE_ERROR;
else
return AE_OK;
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
}
/*******************************************************************************
*
* FUNCTION: acpi_os_purge_cache
*
* PARAMETERS: Cache - Handle to cache object
*
* RETURN: Status
*
* DESCRIPTION: Free all objects within the requested cache.
*
******************************************************************************/
acpi_status acpi_os_purge_cache(acpi_cache_t * cache)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
{
kmem_cache_shrink(cache);
return (AE_OK);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
}
/*******************************************************************************
*
* FUNCTION: acpi_os_delete_cache
*
* PARAMETERS: Cache - Handle to cache object
*
* RETURN: Status
*
* DESCRIPTION: Free all objects within the requested cache and delete the
* cache object.
*
******************************************************************************/
acpi_status acpi_os_delete_cache(acpi_cache_t * cache)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
{
kmem_cache_destroy(cache);
return (AE_OK);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
}
/*******************************************************************************
*
* FUNCTION: acpi_os_release_object
*
* PARAMETERS: Cache - Handle to cache object
* Object - The object to be released
*
* RETURN: None
*
* DESCRIPTION: Release an object to the specified cache. If cache is full,
* the object is deleted.
*
******************************************************************************/
acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
{
kmem_cache_free(cache, object);
return (AE_OK);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 08:00:00 +04:00
}
#endif
static int __init acpi_no_auto_ssdt_setup(char *s)
{
printk(KERN_NOTICE PREFIX "SSDT auto-load disabled\n");
acpi_gbl_disable_ssdt_table_load = TRUE;
return 1;
}
__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
acpi_status __init acpi_os_initialize(void)
{
acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe0_block);
acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe1_block);
return AE_OK;
}
acpi_status __init acpi_os_initialize1(void)
{
kacpid_wq = alloc_workqueue("kacpid", 0, 1);
kacpi_notify_wq = alloc_workqueue("kacpi_notify", 0, 1);
kacpi_hotplug_wq = alloc_ordered_workqueue("kacpi_hotplug", 0);
BUG_ON(!kacpid_wq);
BUG_ON(!kacpi_notify_wq);
BUG_ON(!kacpi_hotplug_wq);
acpi_install_interface_handler(acpi_osi_handler);
acpi_osi_setup_late();
return AE_OK;
}
acpi_status acpi_os_terminate(void)
{
if (acpi_irq_handler) {
acpi_os_remove_interrupt_handler(acpi_gbl_FADT.sci_interrupt,
acpi_irq_handler);
}
acpi_os_unmap_generic_address(&acpi_gbl_FADT.xgpe1_block);
acpi_os_unmap_generic_address(&acpi_gbl_FADT.xgpe0_block);
acpi_os_unmap_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
acpi_os_unmap_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
destroy_workqueue(kacpid_wq);
destroy_workqueue(kacpi_notify_wq);
destroy_workqueue(kacpi_hotplug_wq);
return AE_OK;
}
acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control,
u32 pm1b_control)
{
int rc = 0;
if (__acpi_os_prepare_sleep)
rc = __acpi_os_prepare_sleep(sleep_state,
pm1a_control, pm1b_control);
if (rc < 0)
return AE_ERROR;
else if (rc > 0)
return AE_CTRL_SKIP;
return AE_OK;
}
void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state,
u32 pm1a_ctrl, u32 pm1b_ctrl))
{
__acpi_os_prepare_sleep = func;
}
acpi_status acpi_os_prepare_extended_sleep(u8 sleep_state, u32 val_a,
u32 val_b)
{
int rc = 0;
if (__acpi_os_prepare_extended_sleep)
rc = __acpi_os_prepare_extended_sleep(sleep_state,
val_a, val_b);
if (rc < 0)
return AE_ERROR;
else if (rc > 0)
return AE_CTRL_SKIP;
return AE_OK;
}
void acpi_os_set_prepare_extended_sleep(int (*func)(u8 sleep_state,
u32 val_a, u32 val_b))
{
__acpi_os_prepare_extended_sleep = func;
}