DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
/**************************************************************************
|
|
|
|
|
|
|
|
Copyright © 2006 Dave Airlie
|
|
|
|
|
|
|
|
All Rights Reserved.
|
|
|
|
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
copy of this software and associated documentation files (the
|
|
|
|
"Software"), to deal in the Software without restriction, including
|
|
|
|
without limitation the rights to use, copy, modify, merge, publish,
|
|
|
|
distribute, sub license, and/or sell copies of the Software, and to
|
|
|
|
permit persons to whom the Software is furnished to do so, subject to
|
|
|
|
the following conditions:
|
|
|
|
|
|
|
|
The above copyright notice and this permission notice (including the
|
|
|
|
next paragraph) shall be included in all copies or substantial portions
|
|
|
|
of the Software.
|
|
|
|
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
|
|
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
|
|
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
|
|
IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
|
|
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
|
|
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
|
|
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
|
|
|
|
**************************************************************************/
|
|
|
|
|
|
|
|
#include "dvo.h"
|
|
|
|
|
|
|
|
#define CH7xxx_REG_VID 0x4a
|
|
|
|
#define CH7xxx_REG_DID 0x4b
|
|
|
|
|
|
|
|
#define CH7011_VID 0x83 /* 7010 as well */
|
|
|
|
#define CH7009A_VID 0x84
|
|
|
|
#define CH7009B_VID 0x85
|
|
|
|
#define CH7301_VID 0x95
|
|
|
|
|
|
|
|
#define CH7xxx_VID 0x84
|
|
|
|
#define CH7xxx_DID 0x17
|
|
|
|
|
|
|
|
#define CH7xxx_NUM_REGS 0x4c
|
|
|
|
|
|
|
|
#define CH7xxx_CM 0x1c
|
|
|
|
#define CH7xxx_CM_XCM (1<<0)
|
|
|
|
#define CH7xxx_CM_MCP (1<<2)
|
|
|
|
#define CH7xxx_INPUT_CLOCK 0x1d
|
|
|
|
#define CH7xxx_GPIO 0x1e
|
|
|
|
#define CH7xxx_GPIO_HPIR (1<<3)
|
|
|
|
#define CH7xxx_IDF 0x1f
|
|
|
|
|
|
|
|
#define CH7xxx_IDF_HSP (1<<3)
|
|
|
|
#define CH7xxx_IDF_VSP (1<<4)
|
|
|
|
|
|
|
|
#define CH7xxx_CONNECTION_DETECT 0x20
|
|
|
|
#define CH7xxx_CDET_DVI (1<<5)
|
|
|
|
|
|
|
|
#define CH7301_DAC_CNTL 0x21
|
|
|
|
#define CH7301_HOTPLUG 0x23
|
|
|
|
#define CH7xxx_TCTL 0x31
|
|
|
|
#define CH7xxx_TVCO 0x32
|
|
|
|
#define CH7xxx_TPCP 0x33
|
|
|
|
#define CH7xxx_TPD 0x34
|
|
|
|
#define CH7xxx_TPVT 0x35
|
|
|
|
#define CH7xxx_TLPF 0x36
|
|
|
|
#define CH7xxx_TCT 0x37
|
|
|
|
#define CH7301_TEST_PATTERN 0x48
|
|
|
|
|
|
|
|
#define CH7xxx_PM 0x49
|
|
|
|
#define CH7xxx_PM_FPD (1<<0)
|
|
|
|
#define CH7301_PM_DACPD0 (1<<1)
|
|
|
|
#define CH7301_PM_DACPD1 (1<<2)
|
|
|
|
#define CH7301_PM_DACPD2 (1<<3)
|
|
|
|
#define CH7xxx_PM_DVIL (1<<6)
|
|
|
|
#define CH7xxx_PM_DVIP (1<<7)
|
|
|
|
|
|
|
|
#define CH7301_SYNC_POLARITY 0x56
|
|
|
|
#define CH7301_SYNC_RGB_YUV (1<<0)
|
|
|
|
#define CH7301_SYNC_POL_DVI (1<<5)
|
|
|
|
|
|
|
|
/** @file
|
|
|
|
* driver for the Chrontel 7xxx DVI chip over DVO.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static struct ch7xxx_id_struct {
|
|
|
|
uint8_t vid;
|
|
|
|
char *name;
|
|
|
|
} ch7xxx_ids[] = {
|
|
|
|
{ CH7011_VID, "CH7011" },
|
|
|
|
{ CH7009A_VID, "CH7009A" },
|
|
|
|
{ CH7009B_VID, "CH7009B" },
|
|
|
|
{ CH7301_VID, "CH7301" },
|
|
|
|
};
|
|
|
|
|
|
|
|
struct ch7xxx_priv {
|
|
|
|
bool quiet;
|
|
|
|
};
|
|
|
|
|
|
|
|
static char *ch7xxx_get_id(uint8_t vid)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ch7xxx_ids); i++) {
|
|
|
|
if (ch7xxx_ids[i].vid == vid)
|
|
|
|
return ch7xxx_ids[i].name;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/** Reads an 8 bit register */
|
|
|
|
static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
|
|
|
|
{
|
|
|
|
struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
|
2009-05-30 23:16:25 +04:00
|
|
|
struct i2c_adapter *adapter = dvo->i2c_bus;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
u8 out_buf[2];
|
|
|
|
u8 in_buf[2];
|
|
|
|
|
|
|
|
struct i2c_msg msgs[] = {
|
|
|
|
{
|
2009-05-30 23:16:25 +04:00
|
|
|
.addr = dvo->slave_addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
.flags = 0,
|
|
|
|
.len = 1,
|
|
|
|
.buf = out_buf,
|
|
|
|
},
|
|
|
|
{
|
2009-05-30 23:16:25 +04:00
|
|
|
.addr = dvo->slave_addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
.flags = I2C_M_RD,
|
|
|
|
.len = 1,
|
|
|
|
.buf = in_buf,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
out_buf[0] = addr;
|
|
|
|
out_buf[1] = 0;
|
|
|
|
|
2010-07-21 02:44:45 +04:00
|
|
|
if (i2c_transfer(adapter, msgs, 2) == 2) {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
*ch = in_buf[0];
|
|
|
|
return true;
|
|
|
|
};
|
|
|
|
|
|
|
|
if (!ch7xxx->quiet) {
|
2009-10-09 07:39:43 +04:00
|
|
|
DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
|
2010-07-21 02:44:45 +04:00
|
|
|
addr, adapter->name, dvo->slave_addr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
/** Writes an 8 bit register */
|
|
|
|
static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
|
|
|
|
{
|
|
|
|
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
|
2009-05-30 23:16:25 +04:00
|
|
|
struct i2c_adapter *adapter = dvo->i2c_bus;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
uint8_t out_buf[2];
|
|
|
|
struct i2c_msg msg = {
|
2009-05-30 23:16:25 +04:00
|
|
|
.addr = dvo->slave_addr,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
.flags = 0,
|
|
|
|
.len = 2,
|
|
|
|
.buf = out_buf,
|
|
|
|
};
|
|
|
|
|
|
|
|
out_buf[0] = addr;
|
|
|
|
out_buf[1] = ch;
|
|
|
|
|
2010-07-21 02:44:45 +04:00
|
|
|
if (i2c_transfer(adapter, &msg, 1) == 1)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
return true;
|
|
|
|
|
|
|
|
if (!ch7xxx->quiet) {
|
2009-10-09 07:39:43 +04:00
|
|
|
DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
|
2010-07-21 02:44:45 +04:00
|
|
|
addr, adapter->name, dvo->slave_addr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool ch7xxx_init(struct intel_dvo_device *dvo,
|
2009-05-30 23:16:25 +04:00
|
|
|
struct i2c_adapter *adapter)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
{
|
|
|
|
/* this will detect the CH7xxx chip on the specified i2c bus */
|
|
|
|
struct ch7xxx_priv *ch7xxx;
|
|
|
|
uint8_t vendor, device;
|
|
|
|
char *name;
|
|
|
|
|
|
|
|
ch7xxx = kzalloc(sizeof(struct ch7xxx_priv), GFP_KERNEL);
|
|
|
|
if (ch7xxx == NULL)
|
|
|
|
return false;
|
|
|
|
|
2009-05-30 23:16:25 +04:00
|
|
|
dvo->i2c_bus = adapter;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
dvo->dev_priv = ch7xxx;
|
|
|
|
ch7xxx->quiet = true;
|
|
|
|
|
|
|
|
if (!ch7xxx_readb(dvo, CH7xxx_REG_VID, &vendor))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
name = ch7xxx_get_id(vendor);
|
|
|
|
if (!name) {
|
2009-10-09 07:39:43 +04:00
|
|
|
DRM_DEBUG_KMS("ch7xxx not detected; got 0x%02x from %s "
|
|
|
|
"slave %d.\n",
|
2009-05-30 23:16:25 +04:00
|
|
|
vendor, adapter->name, dvo->slave_addr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
if (!ch7xxx_readb(dvo, CH7xxx_REG_DID, &device))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (device != CH7xxx_DID) {
|
2009-10-09 07:39:43 +04:00
|
|
|
DRM_DEBUG_KMS("ch7xxx not detected; got 0x%02x from %s "
|
|
|
|
"slave %d.\n",
|
2009-05-30 23:16:25 +04:00
|
|
|
vendor, adapter->name, dvo->slave_addr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ch7xxx->quiet = false;
|
2009-10-09 07:39:43 +04:00
|
|
|
DRM_DEBUG_KMS("Detected %s chipset, vendor/device ID 0x%02x/0x%02x\n",
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
name, vendor, device);
|
|
|
|
return true;
|
|
|
|
out:
|
|
|
|
kfree(ch7xxx);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum drm_connector_status ch7xxx_detect(struct intel_dvo_device *dvo)
|
|
|
|
{
|
|
|
|
uint8_t cdet, orig_pm, pm;
|
|
|
|
|
|
|
|
ch7xxx_readb(dvo, CH7xxx_PM, &orig_pm);
|
|
|
|
|
|
|
|
pm = orig_pm;
|
|
|
|
pm &= ~CH7xxx_PM_FPD;
|
|
|
|
pm |= CH7xxx_PM_DVIL | CH7xxx_PM_DVIP;
|
|
|
|
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_PM, pm);
|
|
|
|
|
|
|
|
ch7xxx_readb(dvo, CH7xxx_CONNECTION_DETECT, &cdet);
|
|
|
|
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_PM, orig_pm);
|
|
|
|
|
|
|
|
if (cdet & CH7xxx_CDET_DVI)
|
|
|
|
return connector_status_connected;
|
|
|
|
return connector_status_disconnected;
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum drm_mode_status ch7xxx_mode_valid(struct intel_dvo_device *dvo,
|
|
|
|
struct drm_display_mode *mode)
|
|
|
|
{
|
|
|
|
if (mode->clock > 165000)
|
|
|
|
return MODE_CLOCK_HIGH;
|
|
|
|
|
|
|
|
return MODE_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ch7xxx_mode_set(struct intel_dvo_device *dvo,
|
|
|
|
struct drm_display_mode *mode,
|
|
|
|
struct drm_display_mode *adjusted_mode)
|
|
|
|
{
|
|
|
|
uint8_t tvco, tpcp, tpd, tlpf, idf;
|
|
|
|
|
|
|
|
if (mode->clock <= 65000) {
|
|
|
|
tvco = 0x23;
|
|
|
|
tpcp = 0x08;
|
|
|
|
tpd = 0x16;
|
|
|
|
tlpf = 0x60;
|
|
|
|
} else {
|
|
|
|
tvco = 0x2d;
|
|
|
|
tpcp = 0x06;
|
|
|
|
tpd = 0x26;
|
|
|
|
tlpf = 0xa0;
|
|
|
|
}
|
|
|
|
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TCTL, 0x00);
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TVCO, tvco);
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TPCP, tpcp);
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TPD, tpd);
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TPVT, 0x30);
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TLPF, tlpf);
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_TCT, 0x00);
|
|
|
|
|
|
|
|
ch7xxx_readb(dvo, CH7xxx_IDF, &idf);
|
|
|
|
|
|
|
|
idf &= ~(CH7xxx_IDF_HSP | CH7xxx_IDF_VSP);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
|
|
|
|
idf |= CH7xxx_IDF_HSP;
|
|
|
|
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
|
|
|
|
idf |= CH7xxx_IDF_HSP;
|
|
|
|
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_IDF, idf);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* set the CH7xxx power state */
|
|
|
|
static void ch7xxx_dpms(struct intel_dvo_device *dvo, int mode)
|
|
|
|
{
|
|
|
|
if (mode == DRM_MODE_DPMS_ON)
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_DVIL | CH7xxx_PM_DVIP);
|
|
|
|
else
|
|
|
|
ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ch7xxx_dump_regs(struct intel_dvo_device *dvo)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < CH7xxx_NUM_REGS; i++) {
|
2010-04-03 02:24:27 +04:00
|
|
|
uint8_t val;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
if ((i % 8) == 0 )
|
2009-10-09 07:39:43 +04:00
|
|
|
DRM_LOG_KMS("\n %02X: ", i);
|
2010-04-03 02:24:27 +04:00
|
|
|
ch7xxx_readb(dvo, i, &val);
|
|
|
|
DRM_LOG_KMS("%02X ", val);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-08 01:24:08 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ch7xxx_destroy(struct intel_dvo_device *dvo)
|
|
|
|
{
|
|
|
|
struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
|
|
|
|
|
|
|
|
if (ch7xxx) {
|
|
|
|
kfree(ch7xxx);
|
|
|
|
dvo->dev_priv = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
struct intel_dvo_dev_ops ch7xxx_ops = {
|
|
|
|
.init = ch7xxx_init,
|
|
|
|
.detect = ch7xxx_detect,
|
|
|
|
.mode_valid = ch7xxx_mode_valid,
|
|
|
|
.mode_set = ch7xxx_mode_set,
|
|
|
|
.dpms = ch7xxx_dpms,
|
|
|
|
.dump_regs = ch7xxx_dump_regs,
|
|
|
|
.destroy = ch7xxx_destroy,
|
|
|
|
};
|