microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/gpio/Makefile

109 строки
4.5 KiB
Makefile
Исходник Обычный вид История

gpio: remove some legacy comments in build files The build files for drivers/gpio has some wording and comments about the directory being reserved exclusively for GPIO expanders (according to the gpio.txt file these are on external busses) and this has been false for some time. We already have PL061 and Xilinx drivers which are in silicon and now I'm moving more silicon drivers here, so delete this and reword it a bit. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-20 10:40:19 +04:00
# generic gpio support: platform drivers, dedicated expander chips, etc
gpiolib: add drivers/gpio directory Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO expanders. It will be populated by later patches. This won't be the only place to hold such gpio_chip code. Many external chips add a few GPIOs as secondary functionality (such as MFD drivers) and platform code frequently needs to closely integrate GPIO and IRQ support. This is placed *early* in the build/link sequence since it's common for other drivers to depend on GPIOs to do their work, so they must be initialized early in the device_initcall() sequence. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:28:17 +03:00
ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG
gpio: devm_gpio_* support should not depend on GPIOLIB Some architectures (e.g. blackfin) provide gpio API without requiring GPIOLIB support (ARCH_WANT_OPTIONAL_GPIOLIB). devm_gpio_* functions should also work for these architectures, since they do not really depend on GPIOLIB. Add a new option GPIO_DEVRES (enabled by default) to control the build of devres.c. It also removes the empty version of devm_gpio_* functions for !GENERIC_GPIO build from linux/gpio.h, and moves the function declarations from asm-generic/gpio.h into linux/gpio.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-18 11:57:46 +04:00
obj-$(CONFIG_GPIO_DEVRES) += devres.o
obj-$(CONFIG_GPIOLIB) += gpiolib.o
gpio: move integer GPIO support to its own file The old integer GPIO interface is, in effect, a privileged user of the gpiod interface. Reflect this fact further by moving legacy GPIO support into its own source file. This makes the code clearer and will allow us to disable legacy GPIO support in the (far) future. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-01 09:45:16 +04:00
obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o
gpio: Move DT support code into drivers/gpio The code in drivers/of/gpio.c isn't shared by any other subsystem since it is all gpiolib specific. drivers/gpio is a better place to maintain these functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Linus Walleij <linus.walleij@stericsson.com>
2012-04-08 00:31:33 +04:00
obj-$(CONFIG_OF_GPIO) += gpiolib-of.o
gpio: move sysfs support to its own file sysfs support is currently entangled within the core GPIO support, while it should relly just be a (privileged) user of the integer GPIO API. This patch is a first step towards making the gpiolib code more readable by splitting it into logical parts. Move all sysfs support to their own source file, and share static members of gpiolib that need to be in the private gpiolib.h file. In the future we will want to put some of them back into gpiolib.c, but this first patch let us at least identify them. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-01 09:45:15 +04:00
obj-$(CONFIG_GPIO_SYSFS) += gpiolib-sysfs.o
gpio / ACPI: add ACPI support Add support for translating ACPI GPIO pin numbers to Linux GPIO API pins. Needs a gpio controller driver with the acpi handler hook set. Drivers can use acpi_get_gpio() to translate ACPI5 GpioIO and GpioInt resources to Linux GPIO's. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-30 15:37:36 +04:00
obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o
gpiolib: add gpio provider infrastructure Provide new implementation infrastructure that platforms may choose to use when implementing the GPIO programming interface. Platforms can update their GPIO support to use this. In many cases the incremental cost to access a non-inlined GPIO should be less than a dozen instructions, with the memory cost being about a page (total) of extra data and code. The upside is: * Providing two features which were "want to have (but OK to defer)" when GPIO interfaces were first discussed in November 2006: - A "struct gpio_chip" to plug in GPIOs that aren't directly supported by SOC platforms, but come from FPGAs or other multifunction devices using conventional device registers (like UCB-1x00 or SM501 GPIOs, and southbridges in PCs with more open specs than usual). - Full support for message-based GPIO expanders, where registers are accessed through sleeping I/O calls. Previous support for these "cansleep" calls was just stubs. (One example: the widely used pcf8574 I2C chips, with 8 GPIOs each.) * Including a non-stub implementation of the gpio_{request,free}() calls, making those calls much more useful. The diagnostic labels are also recorded given DEBUG_FS, so /sys/kernel/debug/gpio can show a snapshot of all GPIOs known to this infrastructure. The driver programming interfaces introduced in 2.6.21 do not change at all; this infrastructure is entirely below those covers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:28:20 +03:00
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
# Device drivers. Generally keep list sorted alphabetically
obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o
obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
gpio: Add Avionic Design N-bit GPIO expander support This commit adds a driver for the Avionic Design N-bit GPIO expander. The expander provides a variable number of GPIO pins with interrupt support. Changes in v2: - allow building the driver as a module - assign of_node unconditionally - use linear mapping IRQ domain - properly cleanup IRQ domain - add OF device table and annotate device tables - emulate rising and falling edge triggers - increase #gpio-cells to 2 - drop support for !OF - use IS_ENABLED to conditionalize DEBUG_FS code Changes in v3: - make IRQ support runtime configurable (interrupt-controller property) - drop interrupt-controller and #interrupt-cells from DT binding - add inline to_adnp() function to wrap container_of() macro - consistently use adnp as name for struct adnp variables - remove irq_mask_cur and rename irq_mask to irq_enable - fix a subtle deadlock in adnp_gpio_direction_output() - remove dynamic allocations from debugfs code - rename regs to num_regs to avoid confusion - annotate non-trivial code with comments - don't acquire mutex in adnp_gpio_get() - assume NO_IRQ == 0 Cc: Grant Likely <grant.likely@secretlab.ca> Cc: devicetree-discuss@lists.ozlabs.org Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: linux-kernel@vger.kernel.org Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-18 12:57:10 +04:00
obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips Add a driver to use GPIO pins available on several AMD south bridges (currently only AMD 8111 is supported). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-01 17:36:31 +04:00
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
gpiolib: Add support for Wolfson Microelectronics Arizona class devices The Arizona class devices provide some GPIOs for use in the system. This driver provides support for these via gpiolib. Currently interrupts are not supported, normally the GPIOs are outputs only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [Fold in WM5110 support patch] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-06-23 16:29:25 +04:00
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
gpio: bcm281xx: Add GPIO driver Add the GPIO driver for the Broadcom bcm281xx family of mobile SoCs. These GPIO controllers may contain up to 8 banks where each bank includes 32 pins that can be driven high or low and act as an edge sensitive interrupt. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Christian Daudt <csd@broadcom.com> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> [Added depends on OF_GPIO] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-10 22:07:01 +04:00
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
GPIO: Add support for GPIO on CLPS711X-target platform The CLPS711X CPUs provide some GPIOs for use in the system. This driver provides support for these via gpiolib. Due to platform limitations, driver does not support interrupts, only inputs and outputs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-10-09 20:05:56 +04:00
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
gpio: Add support for Intel Crystal Cove PMIC Devices based on Intel SoC products such as Baytrail have a Power Management IC. In the PMIC there are subsystems for voltage regulation, A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called Crystal Cove. This patch adds support for the GPIO function in Crystal Cove. Signed-off-by: Yang, Bin <bin.yang@intel.com> Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 09:26:04 +04:00
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
GPIO: DA9052 GPIO module v3 DA9052 PMIC has 16 bit GPIO bus for peripheral control. This patch add support for the GPIO pins on the DA9052. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-06 14:32:13 +04:00
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
DA9055 GPIO driver This is the GPIO patch for the DA9055 PMIC. This patch has got dependency on the DA9055 MFD core. This patch is functionally tested on SMDK6410 board. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-14 17:30:16 +04:00
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
gpio: introduce GPIO_DAVINCI kconfig option The compatible to Davinci GPIO HW block is used by other TI SoCs, like Keystone, where GPIO support is declared as optional. Hence, introduce GPIO_DAVINCI Kconfig option which will allow to enable Davinci GPIO driver for Keystone SoCs when needed. At same time, kept Davinci GPIO driver enabled for Davinci SoCs by default. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-11-21 19:34:36 +04:00
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
gpio: add a driver for the Synopsys DesignWare APB GPIO block The Synopsys DesignWare block is used in some ARM devices (picoxcell) and can be configured to provide multiple banks of GPIO pins. v12: - Add irq_startup/shutdown - do irq_create_mapping() in probe, irq_find_mapping() in to_irq() - Adjust mappings to show support for 1 gpio per port. - gpio-cells = <1> v11: - Use NULL when checking existence of 'interrupts' property - Bindings descriptions cleanup v10: - in documentation nr-gpio -> nr-gpios v9: - cleanup in dt bindings doc - use of_get_child_count() v8: - remove socfpga.dtsi changes - minor cleanup in devicetree documentation v7: - use irq_generic_chip - support one irq per gpio line or one irq for many - s/bank/port/ and other cleanup v6: - (atull) squash the set of patches - use linear irq domain - build fixes. Original driver was reviewed on v3.2. - Fix setting irq edge type for 'rising' and 'both'. - Support as a loadable module. - Use bgpio_chip's spinlock during register access. - Clean up register names to match spec - s/bank/port/ because register names use the word 'port' - s/nr-gpio/nr-gpios/ - don't get/put the of_node - remove signoffs/acked-by's because of changes - other cleanup v5: - handle sparse bank population correctly v3: - depend on rather than select IRQ_DOMAIN - split IRQ support into a separate patch v2: - use Rob Herring's irqdomain in generic irq chip patches - use reg property to indicate bank index - support irqs on both edges based on LinusW's u300 driver Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Alan Tull <atull@altera.com> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-26 03:01:01 +04:00
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
gpio: Emma Mobile GPIO driver V2 This patch is V2 of the Emma Mobile GPIO driver. This driver is designed to be reusable between multiple SoCs that share the same basic building block, but so far it has only been used on Emma Mobile EV2. Each driver instance handles 32 GPIOs with individually maskable IRQs. The driver operates on two I/O memory ranges and the 32 GPIOs are hooked up to two interrupts. In the case of Emma Mobile EV2 this GPIO building block is used as main external interrupt controller hooking up 159 GPIOS as 159 interrupts via 5 driver instances and 10 interrupts to the GIC and the Cortex-A9 Dual. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-17 10:22:23 +04:00
obj-$(CONFIG_GPIO_EM) += gpio-em.o
gpio/ep93xx: move driver to drivers/gpio The GPIO driver should reside in drivers/gpio. v3: Change Kconfig option to def_bool y v2: Make the Kconfig symbol a silent option, dependent on ARCH_EP93XX Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-01 21:09:19 +04:00
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
gpio: add GPIO support for F71882FG and F71889F This patch adds support for the GPIOs found on the Fintek super-I/O chips F71882FG and F71889F. A super-I/O is a legacy I/O controller embedded on x86 motherboards. It is used to connect the low-bandwidth devices. Among others functions the F71882FG/F71889F provides: a parallel port, two serial ports, a keyboard controller, an hardware monitoring controller and some GPIO pins. Note that this super-I/Os are embedded on some Atom-based LaCie NASes. The GPIOs are used to control the LEDs and the hard drive power. Changes since v3: - Use request_muxed_region to protect the I/O ports against concurrent accesses. Changes since v2: - Remove useless NULL setters for driver data. Changes since v1: - Enhance the commit message by describing what is a Super-I/O. - Use self-explanatory names for the GPIO register macros. - Add a comment to explain the platform device and driver registration. - Fix gpio_get when GPIO is configured in input mode. I only had the hardware to check this mode recently... Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-08-30 00:56:56 +04:00
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
gpio: Move GE GPIO driver to reside within GPIO subsystem The GE GPIO driver provides basic support (set direction, read/write state) for the GPIO provided on some GE single board computers. This patch moves the driver from the 86xx specific platform directrory to the GPIO subsystem so that it can be used on non-86xx boards. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-12 21:12:58 +04:00
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
gpio: grgpio: Add device driver for GRGPIO cores This driver supports GRGPIO gpio cores available in the GRLIB VHDL IP core library from Aeroflex Gaisler. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-17 16:36:50 +04:00
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
gpio: Add support for Intel ICHx/3100/Series[56] GPIO This driver works on many Intel chipsets, including the ICH6, ICH7, ICH8, ICH9, ICH10, 3100, Series 5/3400 (Ibex Peak), Series 6/C200 (Cougar Point), and NM10 (Tiger Point). Additional Intel chipsets should be easily supported if needed, eg the ICH1-5, EP80579, etc. Tested on QM67 (Cougar Point), QM57 (Ibex Peak), 3100 (Whitmore Lake), and NM10 (Tiger Point). Includes work from Jean Delvare: - Resource leak removal during module load/unload - GPIO API bit value enforcement Also includes code cleanup from Guenter Roeck and Grant Likely. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-18 18:48:24 +04:00
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
ARM: plat-iop: move the GPIO driver to drivers/gpio Move the IOP GPIO driver to live with its siblings in the GPIO subsystem. Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-09 13:59:51 +04:00
obj-$(CONFIG_GPIO_IOP) += gpio-iop.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
gpio: Kontron PLD gpio driver Add gpio support for the on-board PLD found on some Kontron embedded modules. Originally-from: Michael Brunner <michael.brunner@kontron.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-24 08:00:05 +04:00
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
gpio: fix a build failure on KS8695 GPIO I screwed up by compiling that driver for the machine rather than the arch. Correcting this fixes the build error. Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-12-05 17:47:48 +04:00
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
gpio: rename gpio-langwell to gpio-intel-mid gpio-langwell is a deprecated name. Despite the driver was made initially for Langwell, it supports now other Intel Mid SoC's. This patch does no change beside the file renaming with Kconfig/Makefile update. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-05 00:01:41 +04:00
obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
gpio: add LP3943 I2C GPIO expander driver This is one of LP3943 MFD driver. LP3943 is configurable as a GPIO expander, up to 16 GPIOs. * Application note: how to configure LP3943 as a GPIO expander http://www.ti.com/lit/an/snva287a/snva287a.pdf * Supported GPIO controller operations request, free, direction_input, direction_output, get and set * GPIO direction register not supported LP3943 doesn't have the GPIO direction register. It only provides input and output status registers. So, private data for the direction should be handled manually. This variable is updated whenever the direction is changed and used in 'get' operation. * Pin assignment A driver data, 'pin_used' is checked when a GPIO is requested. If the GPIO is already assigned, then returns as failure. If the GPIO is available, 'pin_used' is set. When the GPIO is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-06 06:18:42 +04:00
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem As per example from the other ARM boards, push the LPC32XX GPIO driver down to the GPIO subsystem so it can be consolidated. Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Barry Song <bs14@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22 11:44:45 +04:00
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
gpio/lynxpoint: add chipset gpio driver. Add gpio support for Intel Lynxpoint chipset. Lynxpoint supports 94 gpio pins which can generate interrupts. Driver will fail requests for pins that are marked as owned by ACPI, or set in an alternate mode (non-gpio). Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-12 19:42:38 +04:00
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
obj-$(CONFIG_GPIO_MC33880) += gpio-mc33880.o
ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function we only use the gpio function of mc9s08dz60 mcu chip, so just add the gpio driver, as this mcu will never be used in other board. Signed-off-by: Wu Guoxing <b39297@freescale.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-30 10:31:20 +04:00
obj-$(CONFIG_GPIO_MC9S08DZ60) += gpio-mc9s08dz60.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_MCP23S08) += gpio-mcp23s08.o
obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o
GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them buildable. The following 2 patches will convert the drivers to OF. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-11 20:48:39 +04:00
obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o
gpio: Add MOXA ART GPIO driver Add GPIO driver for MOXA ART SoCs. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-29 15:11:34 +04:00
obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o
gpio: Move mpc5200 gpio driver to drivers/gpio GPIO drivers are getting consolidated into drivers/gpio. While at it, change the driver name to mpc5200-gpio* to avoid collisions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-06 21:54:19 +04:00
obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o
gpio: move mpc8xxx/512x gpio driver to drivers/gpio Move the driver to the place where it is expected to be nowadays. Also rename its CONFIG-name to match the rest and adapt the defconfigs. Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to the platforms, because this option is per-platform and not per-driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-21 14:49:20 +04:00
obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o
gpio: add MSIC gpio driver Add gpio support for Intel MSIC chips found in Intel Medfield platforms. MSIC supports totally 24 GPIOs with 16 low voltage and 8 high voltage pins. Driver uses MSIC mfd interface for MSIC access. (Updated comment to indicate why locking is actually safe) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-04-24 14:02:49 +04:00
obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
Merge branch 'msm-move-gpio' of git://codeaurora.org/quic/kernel/davidb/linux-msm into gpio/next Conflicts: drivers/gpio/Kconfig drivers/gpio/Makefile
2011-08-01 18:16:05 +04:00
obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
gpio: introduce gpio-mvebu driver for Marvell SoCs This driver aims at replacing the arch/arm/plat-orion/gpio.c driver, and is designed to be compatible with all Marvell EBU SoCs: Orion, Kirkwood, Dove, Armada 370/XP and Discovery. It has been successfully tested on Dove and Armada XP at the moment. Compared to the plat-orion driver, this new driver has the following added benefits: *) Support for Armada 370 and Armada XP *) It is integrated with the mvebu pinctrl driver so that GPIO pins are properly muxed, and the GPIO driver knows which GPIO pins are output-only or input-only. *) Properly placed in drivers/gpio *) More extensible mechanism to support platform differences. The plat-orion driver uses a simple mask-offset DT property, which works fine for Discovery MV78200 but not for Armada XP. The new driver uses different compatible strings to identify the different variants of the GPIO controllers. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@free-electrons.com> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-09-20 00:52:58 +04:00
obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
gpio/mxc: Move Freescale MXC gpio driver to drivers/gpio GPIO drivers are getting moved to drivers/gpio for cleanup and consolidation. This patch moves the plat-mxc driver. Follow up patches will clean it up and make it a fine upstanding gpio driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 20:07:54 +04:00
obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
gpio/mxs: Move Freescale mxs gpio driver to drivers/gpio GPIO drivers are getting moved to drivers/gpio for cleanup and consolidation. This patch moves the mxs driver. Follow up patches will clean it up and make it a fine upstanding example of a gpio driver. v2: Removed header file entirely and put struct definition directly into driver. The struct isn't used anywhere else in the kernel. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-06-06 19:37:58 +04:00
obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
gpio MIPS/OCTEON: Add a driver for OCTEON's on-chip GPIO pins. The SOCs in the OCTEON family have 16 (or in some cases 20) on-chip GPIO pins, this driver handles them all. Configuring the pins as interrupt sources is handled elsewhere (OCTEON's irq handling code). Signed-off-by: David Daney <david.daney@cavium.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5633/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-30 01:29:10 +04:00
obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
gpio: omap: add a GPIO_OMAP option instead of using ARCH_OMAP The ARCH_OMAP config option was used to built the GPIO OMAP driver but this is not consistent with the rest of the GPIO drivers that have their own Kconfig option. Also, this make it harder to add dependencies or reverse dependencies (i.e: select) since that would mean touching the sub-arch config option. So is better to add a boolean Kconfig option for this driver that defaults to true if ARCH_OMAP is enabled. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-06 18:58:15 +04:00
obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
ARM: pxa: change gpio to platform device Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-10-17 16:37:52 +04:00
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 The PMIC device RC5T583 from RICOH supports 8 gpios. Adding gpio driver for this device to access the pins control through gpio library. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [grant.likely: slight cosmetic changes] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-05-14 11:16:12 +04:00
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
gpio: Renesas R-Car GPIO driver V3 This patch is V3 of a GPIO driver for the R-Car series of SoCs from Renesas. This driver is designed to be reusable between multiple SoCs that share the same basic building block, but so far it has only been used on R-Car H1 (r8a7779). Each driver instance handles 32 GPIOs with individually maskable IRQs. The driver operates on a single I/O memory range and the 32 GPIOs are hooked up a single interrupt. In the case of R-Car H1 either external IRQ pins or GPIOs with interrupts can be used for on-board interupts. For external IRQs 4 pins are supported, and in the case of GPIO there are 202 GPIOS as 202 interrupts hooked up via 6 driver instances and to the GIC and the Cortex-A9 Quad. At this point this driver is interfacing as a regular platform device driver. In the future DT support will be submitted as an incremental feature patch. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13 15:32:13 +04:00
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entry This patch adds Kconfig entry that selects whether legacy Samsung GPIO driver should be built or not. For platforms that support only DT based boot, the new pinctrl driver is used and so the old one is not needed. Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-18 20:22:20 +04:00
obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o
ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem As per example from the other ARM boards, push the SA100 GPIO driver down to the GPIO subsystem so it can be consolidated. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22 11:49:07 +04:00
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
gpio: add GPIO support for SMSC SCH311x This patch adds support for the GPIOs found on the SMSC "Super I/ SCH311x. The chip detection and I/O functions are copied from sch311x_wdt. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-05 03:56:43 +04:00
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
gpio: Add a driver for Sodaville GPIO controller Sodaville has GPIO controller behind the PCI bus. To my suprissed it is not the same as on PXA. The interrupt & gpio chip can be referenced from the device tree like from any other driver. Unfortunately the driver which uses the gpio interrupt has to use irq_of_parse_and_map() instead of platform_get_irq(). The problem is that the platform device (which is created from the device tree) is most likely created before the interrupt chip is registered and therefore irq_of_parse_and_map() fails. In theory the driver works as module. In reality most of the irq functions are not exported to modules and it is possible that _this_ module is unloaded while the provided irqs are still in use. Signed-off-by: Hans J. Koch <hjk@linutronix.de> [torbenh@linutronix.de: make it work after the irq namespace cleanup, add some device tree entries.] Signed-off-by: Torben Hohn <torbenh@linutronix.de> [bigeasy@linutronix.de: convert to generic irq & gpio chip] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [grant.likely@secretlab.ca: depend on x86 to avoid irq_domain breakage] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-27 11:26:23 +04:00
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
gpio: SPEAr: add spi chipselect control driver SPEAr platform provides a provision to control chipselects of ARM PL022 Prime Cell spi controller through its system registers, which otherwise remains under PL022 control which some protocols do not want. This commit intends to provide the spi chipselect control in software over gpiolib interface. spi chip drivers can use the exported gpiolib interface to define their chipselect through DT or platform data. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16 09:15:25 +04:00
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
gpio: Add STA2X11 GPIO block This introduces 128 gpio bits (for each PCI device installed) with working interrupt support. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-04-12 12:48:55 +04:00
obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder Move the 2 drivers from arch/mips/lantiq/xway/ to the subsystem and make them buildable. The following 2 patches will convert the drivers to OF. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-11 20:48:39 +04:00
obj-$(CONFIG_GPIO_STP_XWAY) += gpio-stp-xway.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
gpio: Driver for SYSCON-based GPIOs SYSCON driver was designed for using memory areas (registers) that are used in several subsystems. There are systems (CPUs) which use bits in one register for various purposes and thus should be handled by various kernel subsystems. This driver allows you to use the individual SYSCON bits as GPIOs. ARM CLPS711X SYSFLG1 input lines has been added as first user of this driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-11 21:55:14 +04:00
obj-$(CONFIG_GPIO_SYSCON) += gpio-syscon.o
gpio: add TB10x GPIO driver The GPIO driver for the Abilis Systems TB10x series of SOCs based on ARC700 CPUs. It supports GPIO control and GPIO interrupt generation. This driver works in conjunction with the TB10x pinctrl driver. Signed-off-by: Sascha Leuenberger <sascha.leuenberger@abilis.com> Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-08 16:25:22 +04:00
obj-$(CONFIG_GPIO_TB10X) += gpio-tb10x.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_TC3589X) += gpio-tc3589x.o
gpio/tegra: Move Tegra gpio driver to drivers/gpio As part of the gpio driver consolidation, this patch moves the Tegra driver into drivers/gpio Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Colin Cross <ccross@android.com>
2011-06-16 00:52:43 +04:00
obj-$(CONFIG_ARCH_TEGRA) += gpio-tegra.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_TIMBERDALE) += gpio-timberdale.o
gpio: palmas: Add support for Palmas GPIO Add gpio driver for TI Palmas series PMIC. This has 8 gpio which can work as input/output. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-03 14:46:59 +04:00
obj-$(CONFIG_GPIO_PALMAS) += gpio-palmas.o
gpio: tps6586x: Add gpio support through platform driver Converting the gpio driver of tps6586x to a platform driver in place of registering the gpio through core driver. The motivation of the change is: - This is inline with the mfd drivers implementation. - This will move the related gpio support to gpio driver folder where all gpio related drivers are available. This will be easy the maintenance and enhancement is anything done for gpio. - The gpio functionality can be selected through config variable. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-18 10:20:48 +04:00
obj-$(CONFIG_GPIO_TPS6586X) += gpio-tps6586x.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_TPS65910) += gpio-tps65910.o
tps65912: gpio: add gpio driver TPS65912 has five GPIOs that can be configured for different purposes. Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-06-09 23:50:19 +04:00
obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
gpio: add TS-5500 DIO blocks support Technologic Systems TS-5500 provides digital I/O lines exposed through pin blocks. On this platform, there are three of them, named DIO1, DIO2 and LCD port, that may be used as a DIO block. The TS-5500 pin blocks are described in the product's wiki: http://wiki.embeddedarm.com/wiki/TS-5500#Digital_I.2FO This driver is not limited to the TS-5500 blocks. It can be extended to support similar boards pin blocks, such as on the TS-5600. This patch is the V2 of the previous https://lkml.org/lkml/2012/9/25/671 with corrections suggested by Linus Walleij. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-08 06:36:34 +04:00
obj-$(CONFIG_GPIO_TS5500) += gpio-ts5500.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
gpio: Add basic support for TWL6040 GPOs TWL6040 provides GPO lines to be used for controlling external devices.The number of lines different between versions: twl6040 have 3 GPO while TWL6041 have 1. Signed-off-by: Sergio Aguirre <saaguirre@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-08-16 16:13:15 +04:00
obj-$(CONFIG_GPIO_TWL6040) += gpio-twl6040.o
gpio-tz1090: add TZ1090 gpio driver Add a GPIO driver for the main GPIOs found in the TZ1090 (Comet) SoC. This doesn't include low-power GPIOs as they're controlled separately via the Powerdown Controller (PDC) registers. The driver is instantiated by device tree and supports interrupts for all GPIOs. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) - gpio-tz1090: use of_property_read_u32 instead of of_get_property Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - some s/unsigned int/bool/ and use of BIT(). - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. - gpio-tz1090: add REG_ prefix to some constants for consistency. - gpio-tz1090: add comment to explain tz1090_gpio_irq_next_edge cunningness. Changes in v2: - gpio-tz1090: remove references to Linux flags in dt bindings - gpio-tz1090: make use of BIT() from linux/bitops.h - gpio-tz1090: make register accessors inline to match pinctrl - gpio-tz1090: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25 18:27:43 +04:00
obj-$(CONFIG_GPIO_TZ1090) += gpio-tz1090.o
gpio-tz1090-pdc: add TZ1090 PDC gpio driver Add a GPIO driver for the low-power Powerdown Controller GPIOs in the TZ1090 SoC. The driver is instantiated by device tree and supports interrupts for the SysWake GPIOs only. Changes in v4: - fix typos in DT bindings compatible properties - reference Documentation/devicetree/bindings/gpio/gpio.txt in gpio-ranges description in DT bindings - fix gpio-ranges examples in DT bindings (it must now have 3 cells) Changes in v3: - separated from irq-imgpdc and removed arch/metag changes to allow these patches to go upstream separately via the pinctrl[/gpio] trees (particularly the pinctrl drivers depend on the new pinconf DT bindings). - some s/unsigned/unsigned int/. - gpio-tz1090*: refer to <dt-bindings/gpio/gpio.h> and <dt-bindings/interrupt-controller/irq.h> flags in bindings. - gpio-tz1090*: move initcall from postcore to subsys. Changes in v2: - gpio-tz1090-pdc: remove references to Linux flags in dt bindings - gpio-tz1090-pdc: make use of BIT() from linux/bitops.h - gpio-tz1090-pdc: make register accessors inline to match pinctrl - gpio-tz1090-pdc: update gpio-ranges to use 3 cells after recent ABI breakage Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25 18:27:44 +04:00
obj-$(CONFIG_GPIO_TZ1090_PDC) += gpio-tz1090-pdc.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
gpio: Add viperboard gpio driver This adds the mfd cell to use the gpio a and gpio b part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-05 18:48:24 +04:00
obj-$(CONFIG_GPIO_VIPERBOARD) += gpio-viperboard.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
gpio: Add APM X-Gene SoC GPIO controller support Add APM X-Gene SoC gpio controller driver. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-31 23:03:25 +04:00
obj-$(CONFIG_GPIO_XGENE) += gpio-xgene.o
gpio: reorganize drivers Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-05 04:38:28 +04:00
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
gpio: driver for Xtensa GPIO32 GPIO32 is a standard optional extension to the Xtensa architecture core that provides preconfigured output and input ports for intra SoC signaling. The GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE) output state called EXPSTATE, and 32bit input wire called IMPWIRE. This driver treats input and output states as two distinct devices. v3: * Use BUG() in xtensa_impwire_set_value() to indicate that it should never be called (Linus Walleij) v2: * Address the comments of Linus Walleij: - Add a few comments - Expand commit log message - Use the BIT() macro for bit offsets - Rewrite CPENABLE handling as static inlines - Use device_initcall() * Depend on !SMP for reason explained in the comments (Marc Gauthier) * Use XCHAL_CP_ID_XTIOP to enable/disable GPIO32 only Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 13:18:41 +04:00
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
gpio: New driver for LSI ZEVIO SoCs This driver supports the GPIO controller found in LSI ZEVIO SoCs. It has been successfully tested on a TI nspire CX calculator. Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-24 23:54:58 +04:00
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
gpio: Add driver for Zynq GPIO controller Add support for GPIO controller used by Xilinx Zynq. v3 changes: - Use linux/gpio/driver.h instead of linux/gpio.h - Make irq a local variable in probe v2 changes: - convert to pm_runtime_force_(suspend|resume) - add pm_runtime_set_active in probe() - also (un)prepare clocks when they are dis-/enabled - add some missing calls to pm_runtime_get() - use pm_runtime_put() instead of sync variant - remove gpio chip in driver remove() - remove redundant type casts - directly use IO helpers - use BIT macro to set/clear bits - migrate to GPIOLIB_IRQCHIP Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-08 15:02:35 +04:00
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o