WSL2-Linux-Kernel/fs/xfs/xfs_sysfs.c

271 строка
5.7 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2014 Red Hat, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_sysfs.h"
#include "xfs_log_format.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_stats.h"
struct xfs_sysfs_attr {
struct attribute attr;
ssize_t (*show)(struct kobject *kobject, char *buf);
ssize_t (*store)(struct kobject *kobject, const char *buf,
size_t count);
};
static inline struct xfs_sysfs_attr *
to_attr(struct attribute *attr)
{
return container_of(attr, struct xfs_sysfs_attr, attr);
}
#define XFS_SYSFS_ATTR_RW(name) \
static struct xfs_sysfs_attr xfs_sysfs_attr_##name = __ATTR_RW(name)
#define XFS_SYSFS_ATTR_RO(name) \
static struct xfs_sysfs_attr xfs_sysfs_attr_##name = __ATTR_RO(name)
#define XFS_SYSFS_ATTR_WO(name) \
static struct xfs_sysfs_attr xfs_sysfs_attr_##name = __ATTR_WO(name)
#define ATTR_LIST(name) &xfs_sysfs_attr_##name.attr
/*
* xfs_mount kobject. This currently has no attributes and thus no need for show
* and store helpers. The mp kobject serves as the per-mount parent object that
* is identified by the fsname under sysfs.
*/
struct kobj_type xfs_mp_ktype = {
.release = xfs_sysfs_release,
};
STATIC ssize_t
xfs_sysfs_object_show(
struct kobject *kobject,
struct attribute *attr,
char *buf)
{
struct xfs_sysfs_attr *xfs_attr = to_attr(attr);
return xfs_attr->show ? xfs_attr->show(kobject, buf) : 0;
}
STATIC ssize_t
xfs_sysfs_object_store(
struct kobject *kobject,
struct attribute *attr,
const char *buf,
size_t count)
{
struct xfs_sysfs_attr *xfs_attr = to_attr(attr);
return xfs_attr->store ? xfs_attr->store(kobject, buf, count) : 0;
}
static const struct sysfs_ops xfs_sysfs_ops = {
.show = xfs_sysfs_object_show,
.store = xfs_sysfs_object_store,
};
#ifdef DEBUG
/* debug */
xfs: export log_recovery_delay to delay mount time log recovery XFS log recovery has been discovered to have race conditions with buffers when I/O errors occur. External tools are available to simulate I/O errors to XFS, but this alone is not sufficient for testing log recovery. XFS unconditionally resets the inactive region of the log prior to log recovery to avoid confusion over processing any partially written log records that might have been written before an unclean shutdown. Therefore, unconditional write I/O failures at mount time are caught by the reset sequence rather than log recovery and hinder the ability to test the latter. The device-mapper dm-flakey module uses an up/down timer to define a cycle for when to fail I/Os. Create a pre log recovery delay tunable that can be used to coordinate XFS log recovery with I/O errors simulated by dm-flakey. This facilitates coordination in userspace that allows the reset of stale log blocks to succeed and writes due to log recovery to fail. For example, define a dm-flakey instance with an uptime long enough to allow log reset to succeed and a log recovery delay long enough to allow the dm-flakey uptime to expire. The 'log_recovery_delay' sysfs tunable is exported under /sys/fs/xfs/debug and is only enabled for kernels compiled in XFS debug mode. The value is exported in units of seconds and allows for a delay of up to 60 seconds. Note that this is for XFS debug and test instrumentation purposes only and should not be used by applications. No delay is enabled by default. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-09 05:56:13 +04:00
STATIC ssize_t
log_recovery_delay_store(
struct kobject *kobject,
xfs: export log_recovery_delay to delay mount time log recovery XFS log recovery has been discovered to have race conditions with buffers when I/O errors occur. External tools are available to simulate I/O errors to XFS, but this alone is not sufficient for testing log recovery. XFS unconditionally resets the inactive region of the log prior to log recovery to avoid confusion over processing any partially written log records that might have been written before an unclean shutdown. Therefore, unconditional write I/O failures at mount time are caught by the reset sequence rather than log recovery and hinder the ability to test the latter. The device-mapper dm-flakey module uses an up/down timer to define a cycle for when to fail I/Os. Create a pre log recovery delay tunable that can be used to coordinate XFS log recovery with I/O errors simulated by dm-flakey. This facilitates coordination in userspace that allows the reset of stale log blocks to succeed and writes due to log recovery to fail. For example, define a dm-flakey instance with an uptime long enough to allow log reset to succeed and a log recovery delay long enough to allow the dm-flakey uptime to expire. The 'log_recovery_delay' sysfs tunable is exported under /sys/fs/xfs/debug and is only enabled for kernels compiled in XFS debug mode. The value is exported in units of seconds and allows for a delay of up to 60 seconds. Note that this is for XFS debug and test instrumentation purposes only and should not be used by applications. No delay is enabled by default. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-09 05:56:13 +04:00
const char *buf,
size_t count)
xfs: export log_recovery_delay to delay mount time log recovery XFS log recovery has been discovered to have race conditions with buffers when I/O errors occur. External tools are available to simulate I/O errors to XFS, but this alone is not sufficient for testing log recovery. XFS unconditionally resets the inactive region of the log prior to log recovery to avoid confusion over processing any partially written log records that might have been written before an unclean shutdown. Therefore, unconditional write I/O failures at mount time are caught by the reset sequence rather than log recovery and hinder the ability to test the latter. The device-mapper dm-flakey module uses an up/down timer to define a cycle for when to fail I/Os. Create a pre log recovery delay tunable that can be used to coordinate XFS log recovery with I/O errors simulated by dm-flakey. This facilitates coordination in userspace that allows the reset of stale log blocks to succeed and writes due to log recovery to fail. For example, define a dm-flakey instance with an uptime long enough to allow log reset to succeed and a log recovery delay long enough to allow the dm-flakey uptime to expire. The 'log_recovery_delay' sysfs tunable is exported under /sys/fs/xfs/debug and is only enabled for kernels compiled in XFS debug mode. The value is exported in units of seconds and allows for a delay of up to 60 seconds. Note that this is for XFS debug and test instrumentation purposes only and should not be used by applications. No delay is enabled by default. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-09 05:56:13 +04:00
{
int ret;
int val;
ret = kstrtoint(buf, 0, &val);
if (ret)
return ret;
if (val < 0 || val > 60)
return -EINVAL;
xfs_globals.log_recovery_delay = val;
return count;
}
STATIC ssize_t
log_recovery_delay_show(
struct kobject *kobject,
char *buf)
xfs: export log_recovery_delay to delay mount time log recovery XFS log recovery has been discovered to have race conditions with buffers when I/O errors occur. External tools are available to simulate I/O errors to XFS, but this alone is not sufficient for testing log recovery. XFS unconditionally resets the inactive region of the log prior to log recovery to avoid confusion over processing any partially written log records that might have been written before an unclean shutdown. Therefore, unconditional write I/O failures at mount time are caught by the reset sequence rather than log recovery and hinder the ability to test the latter. The device-mapper dm-flakey module uses an up/down timer to define a cycle for when to fail I/Os. Create a pre log recovery delay tunable that can be used to coordinate XFS log recovery with I/O errors simulated by dm-flakey. This facilitates coordination in userspace that allows the reset of stale log blocks to succeed and writes due to log recovery to fail. For example, define a dm-flakey instance with an uptime long enough to allow log reset to succeed and a log recovery delay long enough to allow the dm-flakey uptime to expire. The 'log_recovery_delay' sysfs tunable is exported under /sys/fs/xfs/debug and is only enabled for kernels compiled in XFS debug mode. The value is exported in units of seconds and allows for a delay of up to 60 seconds. Note that this is for XFS debug and test instrumentation purposes only and should not be used by applications. No delay is enabled by default. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-09 05:56:13 +04:00
{
return snprintf(buf, PAGE_SIZE, "%d\n", xfs_globals.log_recovery_delay);
}
XFS_SYSFS_ATTR_RW(log_recovery_delay);
static struct attribute *xfs_dbg_attrs[] = {
xfs: export log_recovery_delay to delay mount time log recovery XFS log recovery has been discovered to have race conditions with buffers when I/O errors occur. External tools are available to simulate I/O errors to XFS, but this alone is not sufficient for testing log recovery. XFS unconditionally resets the inactive region of the log prior to log recovery to avoid confusion over processing any partially written log records that might have been written before an unclean shutdown. Therefore, unconditional write I/O failures at mount time are caught by the reset sequence rather than log recovery and hinder the ability to test the latter. The device-mapper dm-flakey module uses an up/down timer to define a cycle for when to fail I/Os. Create a pre log recovery delay tunable that can be used to coordinate XFS log recovery with I/O errors simulated by dm-flakey. This facilitates coordination in userspace that allows the reset of stale log blocks to succeed and writes due to log recovery to fail. For example, define a dm-flakey instance with an uptime long enough to allow log reset to succeed and a log recovery delay long enough to allow the dm-flakey uptime to expire. The 'log_recovery_delay' sysfs tunable is exported under /sys/fs/xfs/debug and is only enabled for kernels compiled in XFS debug mode. The value is exported in units of seconds and allows for a delay of up to 60 seconds. Note that this is for XFS debug and test instrumentation purposes only and should not be used by applications. No delay is enabled by default. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-09 05:56:13 +04:00
ATTR_LIST(log_recovery_delay),
NULL,
};
struct kobj_type xfs_dbg_ktype = {
.release = xfs_sysfs_release,
.sysfs_ops = &xfs_sysfs_ops,
.default_attrs = xfs_dbg_attrs,
};
#endif /* DEBUG */
/* stats */
static inline struct xstats *
to_xstats(struct kobject *kobject)
{
struct xfs_kobj *kobj = to_kobj(kobject);
return container_of(kobj, struct xstats, xs_kobj);
}
STATIC ssize_t
stats_show(
struct kobject *kobject,
char *buf)
{
struct xstats *stats = to_xstats(kobject);
return xfs_stats_format(stats->xs_stats, buf);
}
XFS_SYSFS_ATTR_RO(stats);
STATIC ssize_t
stats_clear_store(
struct kobject *kobject,
const char *buf,
size_t count)
{
int ret;
int val;
struct xstats *stats = to_xstats(kobject);
ret = kstrtoint(buf, 0, &val);
if (ret)
return ret;
if (val != 1)
return -EINVAL;
xfs_stats_clearall(stats->xs_stats);
return count;
}
XFS_SYSFS_ATTR_WO(stats_clear);
static struct attribute *xfs_stats_attrs[] = {
ATTR_LIST(stats),
ATTR_LIST(stats_clear),
NULL,
};
struct kobj_type xfs_stats_ktype = {
.release = xfs_sysfs_release,
.sysfs_ops = &xfs_sysfs_ops,
.default_attrs = xfs_stats_attrs,
};
/* xlog */
static inline struct xlog *
to_xlog(struct kobject *kobject)
{
struct xfs_kobj *kobj = to_kobj(kobject);
return container_of(kobj, struct xlog, l_kobj);
}
STATIC ssize_t
log_head_lsn_show(
struct kobject *kobject,
char *buf)
{
int cycle;
int block;
struct xlog *log = to_xlog(kobject);
spin_lock(&log->l_icloglock);
cycle = log->l_curr_cycle;
block = log->l_curr_block;
spin_unlock(&log->l_icloglock);
return snprintf(buf, PAGE_SIZE, "%d:%d\n", cycle, block);
}
XFS_SYSFS_ATTR_RO(log_head_lsn);
STATIC ssize_t
log_tail_lsn_show(
struct kobject *kobject,
char *buf)
{
int cycle;
int block;
struct xlog *log = to_xlog(kobject);
xlog_crack_atomic_lsn(&log->l_tail_lsn, &cycle, &block);
return snprintf(buf, PAGE_SIZE, "%d:%d\n", cycle, block);
}
XFS_SYSFS_ATTR_RO(log_tail_lsn);
STATIC ssize_t
reserve_grant_head_show(
struct kobject *kobject,
char *buf)
{
int cycle;
int bytes;
struct xlog *log = to_xlog(kobject);
xlog_crack_grant_head(&log->l_reserve_head.grant, &cycle, &bytes);
return snprintf(buf, PAGE_SIZE, "%d:%d\n", cycle, bytes);
}
XFS_SYSFS_ATTR_RO(reserve_grant_head);
STATIC ssize_t
write_grant_head_show(
struct kobject *kobject,
char *buf)
{
int cycle;
int bytes;
struct xlog *log = to_xlog(kobject);
xlog_crack_grant_head(&log->l_write_head.grant, &cycle, &bytes);
return snprintf(buf, PAGE_SIZE, "%d:%d\n", cycle, bytes);
}
XFS_SYSFS_ATTR_RO(write_grant_head);
static struct attribute *xfs_log_attrs[] = {
ATTR_LIST(log_head_lsn),
ATTR_LIST(log_tail_lsn),
ATTR_LIST(reserve_grant_head),
ATTR_LIST(write_grant_head),
NULL,
};
struct kobj_type xfs_log_ktype = {
.release = xfs_sysfs_release,
.sysfs_ops = &xfs_sysfs_ops,
.default_attrs = xfs_log_attrs,
};